Search Results

Search found 7501 results on 301 pages for 'usb stick'.

Page 132/301 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • Mobile Intel® GMA 4500MHD boost

    - by Andy Smith
    My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

    Read the article

  • Mixing RAM brands

    - by Andy
    Hey guys, I'm scheduled to install a server at a colo facility tomorrow, but I've hit a snag. ESXi doesn't like the fact that I have 12GB ram in my server (8gb on one side of CPU, 4gb on the other). I currently have 3xCrucial 4gb ECC DDR3 1333mhz sticks (http://www.amazon.com/gp/product/B001TGT7EE/ref=oss_product) and I'm planning on stopping by Fry's on the way to the colo facility so I can pick up another stick so that ESXi will install. Problem is, Fry's doesn't stock Crucial RAM. They do have a stick that I think is identical to my crucial one: http://www.frys.com/product/5915524?site=sr:SEARCH:MAIN_RSLT_PG Will this be dangerous to use in my server? The specs on the RAM are the same as far as I know (ecc registered, 1333mhz, ddr3, 4gb).

    Read the article

  • Supermicro MBD-X9DRL-IF-B and 8 X Hynix 4Gb DDR3 ECC dont boot

    - by Avi Keinan
    I have a custom build server with 2 Xeon E5-2609 and Supermicro MBD-X9DRL-IF-B. Right now the server has 4X Hynix 4Gb 2Rx8 PC3L-10600R-9-10-B0 HMT351R7BFR8A. and its working great. We baught another 4 from the same series of memory, when we installed all the ram (4 sticks already installed and we added 4 new sticks) the server didn't boot. When we replaced the current memory with the new memory - the server did boot. Right now we are in a problem because we need to extend this server ram but the motherboard don't run with 8X4Gb. Any ideas why? I have attached a picture with one of the current memory stick and one of the new memory stick. Thanks in advence.

    Read the article

  • How to rate-limit concurrent sessions with nginx or haproxy?

    - by bantic
    I'm currently using nginx to reverse-proxy requests from web clients that are doing long-polling to an upstream. Since we're doing long polling (as opposed to websockets), when a client connects it will make multiple http connections to the server in serial, re-establishing a connection every time the server sends it some data (or timing out and re-establishing if the server has nothing to say for 10 seconds). What I'd like to do is limit the number of concurrent web clients. Since the clients are constantly making new HTTP requests instead of keeping a single request open, it's a little tricky to count the total number of web clients (because it's not the same as total number of concurrently connected http clients). The method I've come up with is to track http requests by the originating IP address, and store the IP address somewhere with a TTL of 20 seconds. If a request comes in whose IP isn't recognized, then we check the total number of unexpired stored IP addresses; if that's less than the maximum then we allow this request through. And if a request comes in with an IP address that we can find in the look-up table that hasn't yet expired, then it is allowed through as well. All requests that are allowed through have their IPs added to the table (if not there before) and the TTL refreshed to 20 seconds again. I had actually whipped something together that worked correctly this way using nginx along with the Redis 2.0 Nginx Module (and the nginx lua module to simplify the conditional branching), using redis to store my IP addresses with a TTL (the SETEX command), and checking the table size with the DBSIZE command. This worked but the performance was horrible. nginx and redis ended up using lots of cpu and the machine could only handle a very small number of concurrent requests. The new stick-table and tracking counters that were added to Haproxy in version 1.5 (via a commission from serverfault) seem like they might be ideal to implement exactly this sort of rate limiting, because the stick-table can track IP addresses and automatically expire entries. However, I don't see an easy way to get a total count of the unexpired entries in the stick table, which would be necessary to know the number of connected web clients. I'm curious if anyone has any suggestions, for nginx or haproxy or even for something else not mentioned here that I haven't thought of yet.

    Read the article

  • Change permission to /proc/net/ip_conntrack on Ubuntu server 9.10

    - by bjarkef
    Hi I have a script that needs to extract certain information form the /proc/net/ip_conntrack file once in a while. I do not wish to run this script as the root user. Default permissions for the file is: $ ls -lah /proc/net/ip_conntrack -r--r----- 1 root root 0 2010-03-28 12:18 /proc/net/ip_conntrack I can change it with: sudo chmod o+r /proc/net/ip_conntrack But that does not stick after a reboot. Is there some configuration file for file-permissions in the /proc directory in Ubuntu Server 9.10? Or do I just have to stick a chmod line in some startup script?

    Read the article

  • Need help upgrading MacBookPro3,1 RAM to 4GB.

    - by Fantomas
    My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

    Read the article

  • How to prevent Google Toolbar being installed in Portable Firefox?

    - by HyperHacker
    Recently, the campus computers installed Google Toolbar in Firefox. Now, I have no use for this toolbar, so I don't want it there. For that and other reasons, I installed Portable Firefox on a USB stick and use that instead. Somehow, when I log into one of these machines and start Portable Firefox, guess what? "Thank you for installing Google Toolbar." No! I don't want some IT guy choosing what extensions to install on my personal Firefox on my USB stick. I can uninstall it but next time I log in, it comes right back. I suppose PF is for some reason reading things from the local disk, or there's some kind of background process installing it? How do I prevent extensions being installed without my consent?

    Read the article

  • Netbook won't boot after using EasyBCD

    - by TNC
    I have an Asus T91MT netbook on which I used to have Windows 7 Home Premium and Ubuntu 10.10 installed (dual boot). After trying to upgrade to Ubuntu 11.04, Ubuntu is no longer able to boot, so I tried to uninstall Ubuntu completely and then reinstall it. Following these directions, I tried using EasyBCD to bypass the GRUB2 bootloader so that after uninstalling, it would automatically boot into Windows 7. However, after doing the "install BCD" step and restarting, I got the following message: Windows failed to start... File: \Boot\BCD; Status: 0xc0000098; Info: The Windows Boot Configuration Data file does not contain a valid OS entry. I'm currently trying to create a USB stick of the Windows Installation disc but in the mean time, I can only boot from a Ubuntu USB stick. Is there anything I can do from within Ubuntu to fix this? Or does anyone have any other suggestions/solutions?

    Read the article

  • Could 1 GB of RAM work better than 1.25?

    - by user67082
    This is for a server running Ubuntu Server 10.10. The server is an old desktop PC. It had 2 sticks of 256 MB of 182-pin DDR 400 MHz RAM in it (total 512 MB of RAM). I just ordered a 1 GB stick of compatible RAM for the machine (now would have a total of 1.25 GB of RAM). A friend told me that it might run better if I removed both sticks of 256 MB RAM and used just the 1 GB stick I will be receiving. This seems counterintuitive since then there would only be 1 GB of RAM instead of 1.25; is it possible that it would be better to run with 1 GB or is he totally wrong? Thanks for the help.

    Read the article

  • Ubuntu eats itself after I followed updater instruction

    - by Tony Martin
    Updater (I assume) put a no entry style alert icon on the panel which informed me that certain package dependencies were not up to snuff. Upgrades were thereafter only partial. The dialogue advised that I (and this is from noob memory) sudo apt-get install -f. I did this and typed in the confirmation phrase and watched apt-get systematically remove every component of linux, both the stuff I installed and the core ubuntu packages. I could only assume at this stage that this was for a fresh install but of course, I know better now. There's much complaint about Windows, but I've never met with advice from Microsoft tools to wipe out the operating system because of a couple of missing .dlls. So what gives? This was a 64 bit install of 12.04. All that is left is grub pointing to a couple of windows recovery partitions on the hard drive. I'm tempted, but I have hopes of recovering the data that I had enough misguided faith to trust to the linux ext4 partition. I've tried pen driving back into it with a 32 bit iso but I'm simply informed that ubuntu is running in low graphics mode and get to watch the dots cycle indefinitely. EDIT: Thanks for the advice vis positive request. I've got onto the machine with a 64 bit stick and can see the file structure left behind by the installation. My first instinct was to run install from the stick but it did not seem to offer a recovery option. My question then: is there a way to recover the current installation so that if I reinstall the packages I had they will pick up the original settings. I'm particularly worried about losing email from evolution - the rest I could probably lash back together. I would also be interested how this disaster came about. I see people in the know recommending this same procedure in similar circumstances. Thanks for your attention, Tony Martin

    Read the article

  • Gateway ZA8 Netbook graphics Issue

    - by Hansel
    The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

    Read the article

  • How do I connect to my running VM via virsh?

    - by Avery Chan
    My VM has already been started via virsh start chameleon.ootbdev. When I do a virsh console chameleon.ootbdev I get the following output: Connected to domain chameleon.ootbdev Escape character is ^] error: internal error cannot find character device (null) Doing a google search on this led me to this "solution". Unfortunately, editing the domain via virsh edit chameleon.ootbdev doesn't seem to stick. I suspect the issue is that I'm inserting the XML incorrectly: the instructions from the link ask me to insert the following XML into the domain XML file. <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> I've posted my domain XML file to pastebin here. This is AFTER I've tried to insert the above XML. I inserted this XML after the </devices> block. My primary question is: How do I connect to the running VM? A secondary question would be: How do I edit the domain file with the above XML and get the changes to stick?

    Read the article

  • Why does my system use so much cache?

    - by Dave M G
    Previously, on my desktop computer running Ubuntu 14.04, I had 4GB RAM, which I thought should be plenty. However, after being on for a while, my computer would seem to get slow. I have a system resource monitor app in my Gnome panel, which I assume represents the available RAM (?). It shows a dark green area as being "Memory", and a light green area as "Cache". The "Cache" would slowly grow until it filled the whole graph, and then programs would get slow to load, or it would take a while to switch programs. I could alleviate the problem somewhat with this command, but eventually the computer cache fills up again, so it's only a bandaid: sudo sh -c "sync; echo 3 > /proc/sys/vm/drop_caches" So, I figured I'd get more RAM, so I replaced one 2GB stick with an 8GB stick, and now I have 10 GB ram. And my "cache" still slowly maxes out and my computer slows as a result. Also, sometimes the computer starts out with "cache" maxed when I first boot and log in. Not always though, I don't know if there's a pattern that determines why it happens. Why is Ubuntu using up so much cache? Is 10GB not enough for Ubuntu? Here's what my system monitor looks like in my Gnome panel. The middle square shows RAM usage. The light green area is the "cache": This is my memory and swap history, which doesn't seem to include any information about "cache". I realize at this point I'm not totally clear on the difference between "cache" and "swap":

    Read the article

  • so, my Cassandra consultant left me and now I'm thinking about reverting to mysql

    - by sathia
    I run a middle size community and some time ago I started to develop social capabilities such as follow, status update, wall etc. For some reason i thought that Cassandra was the right tool for the job so I looked online for a Cassandra developer and I found a very talented one. Unluckily in the midst of the development the dev left (too much jobs) and so I'm here with a very nice class, a very nice demo, but a lot of fears that I won't be able to handle basic things such as compaction, scaling etc. My biggest fear is to go online with all this coolness and then having a site inaccessible for hours or days. The mysql consultant (very talented too) keeps saying me that I should stick with Mysql which I know rather well and in case something's wrong we can manage. In that case I should take the class made for cassandra and abstract it for Mysql. My question is this: Should I find another dev/consultant and stick with Cassandra because for social things it is definitely the best tool for the job, or should I listen to the Mysql consultant and revert to Mysql? About 15k login each day Average 20 actions per user Avg 6 followers x user (These are current statistics, but of course I'd like to increase them as much as possible.)

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • Black screen with thinkpad edge e525, AMD radeon HD before and after installation, plymouth?

    - by carolien
    I have a new thinkpad edge e525 (which should work) and wanted to try ubuntu (first linux experience). With the ubuntu desktop-cd I had a blackscreen before installation, I could fix that with nomodeset. After the installation, when rebooting I got the black screen again. First I see some ubuntu colour with a green busted stripe. I have the same problem with the live boot, also tried mint live, the stripe gets pink. I installed xubuntu 64bit from an alternate cd and I didnt have problems until de reboot after the installation. Same problem, just a black screen with the green stripe than blackscreen. I tried several things: adding nomodeset to the bootmenu, but than I get: No connection to plymouth and it is stuck at checking the battery status. I tried to replace quiet splash with text. Didnt work either. actually one time I saw a blue booting image before that. I managed to get a root command though via the recovery boot. I didnt dare to just remove the plymouth package. Can I just delete plymouth or do I have to deinstall it as described in several ways. (Problem is, right now the notebook doesnt have a internet connection. And I dont know how to manage it with a usb stick?) Or do I have to install the AMD catalyst driver manually? (Again, how can I do that with an usb stick) I also tried this: Ubuntu hits a black screen after boot. Is there any solution without internet? And if I need internet which is the right one? Please explain step by step what I have to write and so on! Thank you! also tried: set gfxpayload=text and: just remove splash and adding vesafb.nonsense=1 to the grub editor, because I couldnt find it anywhere

    Read the article

  • Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

    - by Sulliwane
    I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

    Read the article

  • Ubuntu 14.04 LTS 64-bit install alongside Windows 7

    - by user289222
    I've tried installing Ubuntu 14.04 LTS alongside my Windows 7 OS, following the exact procedure given by the Ubuntu website and random other tutorials. I've tried with a LiveCD and with a USB stick but I always run into the same problem. When I'm at the screen where I'm allowed to select how I want to install Ubuntu ("alongside", "erase Windows 7", "something else"), the first option says "Install Ubuntu inside Windows 7" instead of "Install Ubuntu alongside Windows 7". From pretty much all tutorials I've seen, the tutorial says that the option should say "alongside". I click "inside" anyway, and Ubuntu doesn't install at all. Instead, my computer just reboots, and goes back to the Try Ubuntu or Install Now screen. This happens regardless of using a LiveCD or a USB stick. I've also tried manually resizing my partitions using "something else". Oddly, I see 4 sda partitions: /dev/sda type size used /dev/sda1 1mb unknown Windows 7 (loader) /dev/sda2 ntsf 208mb unknown Recovery Windows Environment (loader) /dev/sda3 ntsf ~752000mb unknown Recovery Windows Environment (loader) /dev/sda4 ~18000mb unknown I try resizing the largest partition, but some sort of internal error occurs and it doesn't let me resize my partitions. Any ideas on what's going on and how to solve it?

    Read the article

  • Multiple domains for different products?

    - by alexandertr
    I have a website with software applications. Is it good for SEO to choose one keyword rich domain name for each of our software products or should we stick to a single domain? From a user's perspective I think it would be easier to remember a domain that is keyword rich as the user will instantly know what this product is for. But I have read articles that the latest trend in SEO is to stick to one domain for all of your products and invest on this single domain website. Is that true? What do you advise? Should I register a separate domain for each of our products or should I use only one single domain? Should I do a 301 redirect with a .htaccess to a single domain? And what about the sitemaps? Should I register all sites in Google Webmaster Tools and post a separate sitemap for each one of them? should my main site sitemap include all pages or should separate domains have their own sitemaps?

    Read the article

  • Ubuntu 12.04 "stuttering"

    - by Totte
    When I log in to the desktop Ubuntu seems to "stutter". Doing pretty much anything causes the cursor to freeze for a few seconds, and the rest of the screen updates something like every 15 seconds (during these 15 seconds I can still move the cursor). For example, opening the home folder I first see no effect, followed by a semi-transparent home folder, and finally the folder as it should be (this can take like 30 seconds); no animation, just three individual frames. Also, I sometimes don't see a window for a program, even though the program in question is supposed to be "up". Since this is my first experience of Linux, I confess I have no idea where to start - searching the web I only found problems with complete freezes/crashes requiring rebooting, as opposed to this "stuttering". I installed Ubuntu 12.04 32bit from a bootable USB stick a couple of days ago, right after a fresh Vista 32bit install. Thinking the stuttering might stop if I updated Ubuntu, I managed to install approx 270 updates through the Update Manager, but the stuttering was still there. Apart from the updates, I haven't installed any software other than what was included on the bootable USB stick. Vista and Ubuntu are on a single Crucial m4 SSD, in a dual-boot setup, with GRUB. CPU: Intel Core 2 Quad Q6600 GPU: Nvidia GeForce 8800 GTX (with the recommended proprietary drivers) RAM: 2GB DDR2

    Read the article

  • Slow wifi on Ubuntu 12.04 wifi driver ath9k

    - by lunar
    For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Mind Reading with the Raspberry Pi

    - by speakjava
    Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

    Read the article

  • Does O2Micro Oz776 Smartcard reader support SLE5528 cards?

    - by Proton
    Well, the title seems indicating I'm a lazy guy but it's not the truth... I'm messing with this weird circumstance a whole day. My laptop is a Dell Latitude D630 which has a Oz776 (usb idVendor == 0x0b97, idProduct == 0x7772) smartcard reader, but I'm not sure if it is functioning well. It can successfully recognize my Gemplus GPK4000 smartcard and my SIM card, but not SLE5528. This is my pcscd log when insert the GPK4000: 06039271 ifdhandler.c:1043:IFDHPowerICC() action: PowerUp, usb:0b97/7772:libhal:/org/freedesktop/Hal/devices/usb_device_b97_7772_noserial_if0 (lun: 0) 00000100 - 000000 62 00 00 00 00 00 14 01 00 00 00967744 <- 000000 80 0A 00 00 00 00 14 00 00 00 3B 27 00 80 65 A2 0C 01 01 37 00000048 ATR: 3B 27 00 80 65 A2 0C 01 01 37 00000013 atrhandler.c:102:ATRDecodeAtr() Conv: 01, Y1: 02, K: 07 00000011 atrhandler.c:120:ATRDecodeAtr() TA1: FFFFFFFF, TB1: 00, TC1: FFFFFFFF, TD1:FFFFFFFF 00000011 atrhandler.c:248:ATRDecodeAtr() CurrentProtocol: 1, AvailableProtocols: 1 00000062 eventhandler.c:429:EHStatusHandlerThread() Card inserted into O2 Micro Oz776 00 00 00000014 Card ATR: 3B 27 00 80 65 A2 0C 01 01 37 29016873 eventhandler.c:361:EHStatusHandlerThread() Card Removed From O2 Micro Oz776 00 00 This is the log when insert a SLE5528 card: 99999999 ifdhandler.c:1043:IFDHPowerICC() action: PowerUp, usb:0b97/7772:libhal:/org/freedesktop/Hal/devices/usb_device_b97_7772_noserial_if0 (lun: 0) 00000048 - 000000 62 00 00 00 00 00 11 01 00 00 ** Then it chokes here, when I remove the card, the log continues ** 04741980 <- 000000 80 00 00 00 00 00 11 42 FE 00 00000044 commands.c:225:CmdPowerOn Card absent or mute 00000017 ifdhandler.c:1096:IFDHPowerICC() PowerUp failed 00000082 eventhandler.c:429:EHStatusHandlerThread() Card inserted into O2 Micro Oz776 00 00 00000021 eventhandler.c:443:EHStatusHandlerThread() Error powering up card. 00402818 eventhandler.c:361:EHStatusHandlerThread() Card Removed From O2 Micro Oz776 00 00 I found that SLE5528 is ISO7816 compatible, and it should have ATR, but it just chokes at the PowerUp. When inserted any PVC card with no chip or AT24C01 card, it would not choke but report immediate PowerUp failure. When I tried it on Windows(Windows 7, "runas other user", smartcard login), it chokes too while PVC cards and AT24C01 report immediate failure.

    Read the article

  • Using child visitor in C#

    - by Thomas Matthews
    I am setting up a testing component and trying to keep it generic. I want to use a generic Visitor class, but not sure about using descendant classes. Example: public interface Interface_Test_Case { void execute(); void accept(Interface_Test_Visitor v); } public interface Interface_Test_Visitor { void visit(Interface_Test_Case tc); } public interface Interface_Read_Test_Case : Interface_Test_Case { uint read_value(); } public class USB_Read_Test : Interface_Read_Test_Case { void execute() { Console.WriteLine("Executing USB Read Test Case."); } void accept(Interface_Test_Visitor v) { Console.WriteLine("Accepting visitor."); } uint read_value() { Console.WriteLine("Reading value from USB"); return 0; } } public class USB_Read_Visitor : Interface_Test_Visitor { void visit(Interface_Test_Case tc) { Console.WriteLine("Not supported Test Case."); } void visit(Interface_Read_Test_Case rtc) { Console.WriteLine("Not supported Read Test Case."); } void visit(USB_Read_Test urt) { Console.WriteLine("Yay, visiting USB Read Test case."); } } // Code fragment USB_Read_Test test_case; USB_Read_Visitor visitor; test_case.accept(visitor); What are the rules the C# compiler uses to determine which of the methods in USB_Read_Visitor will be executed by the code fragment? I'm trying to factor out dependencies of my testing component. Unfortunately, my current Visitor class contains visit methods for classes not related to the testing component. Am I trying to achieve the impossible?

    Read the article

  • Ubuntu keyboard detection from bash script

    - by Ryan Brubaker
    Excuse my ignorance of linux OS/hardware issues...I'm just a programmer :) I have an application that calls out to some bash scripts to launch external applications, in this case Firefox. The application runs on a kiosk with touch screen capability. When launching Firefox, I also launch a virtual keyboard application that allows the user to have keyboard input. However, the kiosk also has both PS/2 and USB slots that would allow a user to plug-in a keyboard. If a keyboard were plugged in, it would be nice if I didn't have to launch the virtual keyboard and provide more screen space for the Firefox window. Is there a way for me to detect if a keyboard is plugged in from the bash script? Would it show up in /dev, and if so, would it show up at a consistent location? Would it make a difference if the user used a PS/2 or USB keyboard? Thanks!

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >