Search Results

Search found 6387 results on 256 pages for 'cpu allocation'.

Page 133/256 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Ubuntu 10.10 freezes

    - by albert green
    Hi, I have the following configuration: CPU: amd athlon 64bit Motherboard: Phoenix with awardBIOS v6.0 APIC mode = disabled Video card: GeForce 5500 Sound card: soundblaster live 24bit RAM: 1.5GB Partitions: ext3 32GB where I installed Ubuntu. Swap 500MB. 180GB Fat32 unmounted. contains data only. I installed Ubuntu 10.10 and used the "Additional driver" program to get the nVidia proprietary drivers. The system works for sometime and randomly freezes. The mouse and keyboard are not responding and I am not able to do a SSH. The only solution is pressing the power button. I tried Kubuntu 10.10 and 32/64-bits versions as well. There is nothing in the logs to suggest what the reason might be. Any help will be appreciated. Thanks in advance.

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • Ubuntu studio/xubuntu 12.04 instead of Ubuntu 12.04/12.10 for CAD/ arhcitectural workflow. Worth it?

    - by gabriel
    I am currently using Ubuntu 12.10. So, as described in the title I am planning to install Ubuntu studio. The programs i use are Blender, Maya 2013, NukeX, Bricscad, Sketchup (with wine) and also i am planning to install revit architecture through VirtualBox. Well, I am using a quad-core CPU and i want to have all the power of my system for rendering/modelling. So, i decided to try a more lightweight desktop than unity. Also, what made me to decide this, is that when i tried to install Bricscad v12 the program does not work. So, i thought that if i want something more professional for my work i should have only LTS versions of lightweight Ubuntu. So, my 2 questions are :1) Worth it? 2) Can i have global menu(close,minimize,maximize buttons, menu) like ubuntu/unity? Thanks

    Read the article

  • Solving iPhone/iPad out of memory issues

    - by Joonas Trussmann
    I have a strange issue where I'm scrolling through a paged UIScrollView which displays the pages of a PDF document (using Quartz 2D and CATiledLayer). When I page through memory allocation looks fine with it going up with a few initial pages and then keeping it steady as it obviously releases the memory kept for earlier pages. Upon hitting page x (not a certain PDF page or a certain number per se) memory usage goes from a couple of megs to 308 megs and the app crashes. So my question is: how to best try to find what's causing this? The object alloc tool in instruments shows the memory as simply going to malloc. (in huge chunks).

    Read the article

  • Adhoc Data processing / ETL

    - by Dane
    I've just started at a new company in outsourced communications (e.g. print and mail, email, fax). One of the requirements is to process clients data and get it ready for mailing. For recurring jobs, this is easy using an ETL tool linked in with some addressing software, but for adhoc stuff it's a bit overkill. I've used inhouse developed stuff before (clunky but usable), but I don't want to have to re-develop that here. Any recommendations? Some features : Basic DBMS functionality (preferably with a proper DBMS backend for SQL support) Field concatenation (e.g. combine Firstname + Surname) "Pushing columns" (e.g. with address fields 1 - 8, push them left so if one is blank, the next one gets pushed up) Australia post mail sorting and dpid allocation (or can link into external tools relatively easily)

    Read the article

  • What Are the Windows A: and B: Drives Used For?

    - by Jason Fitzpatrick
    The C: drive is the default installation location for Windows, if you have a CD/DVD drive on your machine it’s likely the D: drive, and any additional drives fall in line after that. What about the A: and B: drives? Image by Michael Holley. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. HTG Explains: What is DNS? How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU

    Read the article

  • BlueStacks Joins Forces with AMD; Launches AMD-only Enhanced Android App Launcher

    - by Jason Fitzpatrick
    Last fall we showed you how to run Android apps on your Windows PC with BlueStacks. Now BlueStacks has partnered with AMD to offer even better Android emulation on AMD-powered Windows machines. Check out our original overview and installation guide for BlueStacks to get a feel for what you can do with the app. If you’re sporting an AMD CPU, hit up the link below to check out the AMD AppZone to grab some of the thousands of Android apps you can enjoy on your desktop. AMD AppZone: Android [via Gigaom] 8 Deadly Commands You Should Never Run on Linux 14 Special Google Searches That Show Instant Answers How To Create a Customized Windows 7 Installation Disc With Integrated Updates

    Read the article

  • optimal memory layout for read-only/write memory segments.

    - by aaa
    hello. Suppose I have two memory segments (equal size each, approximately 1kb in size) , one is read-only (after initialization), and other is read/write. what is the best layout in memory for such segments in terms of memory performance? one allocation, contiguous segments or two allocations (in general not contiguous). my primary architecture is linux Intel 64-bit. my feeling is former (cache friendlier) case is better. is there circumstances, where second layout is preferred? Thanks

    Read the article

  • How can I avoid the random restart of the xserver?

    - by Bernd
    I'm using a desktop pc with 64bit Ubuntu 12.04 (Kernel 3.2.0-24-generic). Hardware specs are - Intel Core i7 CPU 860 @ 2,80GHz x 8 - Nvidia GeForce GTS 250 - 750 GB Hard Disk ATA WDC WD7501AALS-00E3A0 (for my /home partition) - 128 GB Solid-State Disk ATA PLEXTOR PX-128M2S (for all other partitions) Since I reinstalled the PC with Ubuntu 12.04 the xserver restarts randomly. Most times when I watch a video in the browser (maybe a flash issue?) but sometimes the restart/crash appears when I'm working in an text-editor. How can I locate the problem? Which information is needed for a useful answer?

    Read the article

  • Why use an OO approach instead of a giant "switch" statement?

    - by James P. Wright
    I am working in a .Net, C# shop and I have a coworker that keeps insisting that we should use giant Switch statements in our code with lots of "Cases" rather than more object oriented approaches. His argument consistently goes back to the fact that a Switch statement compiles to a "cpu jump table" and is therefore the fastest option (even though in other things our team is told that we don't care about speed). I honestly don't have an argument against this...because I don't know what the heck he's talking about. Is he right? Is he just talking out his ass? Just trying to learn here.

    Read the article

  • circle - rectangle collision in 2D, most efficient way

    - by john smith
    Suppose I have a circle intersecting a rectangle, what is ideally the least cpu intensive way between the two? method A calculate rectangle boundaries loop through all points of the circle and, for each of those, check if inside the rect. method B calculate rectangle boundaries check where the center of the circle is, compared to the rectangle make 9 switch/case statements for the following positions: top, bottom, left, right top left, top right, bottom left, bottom right inside rectangle check only one distance using the circle's radius depending on where the circle happens t be. I know there are other ways that are definitely better than these two, and if could point me a link to them, would be great but, exactly between those two, which one would you consider to be better, regarding both performance and quality/precision? Thanks in advance.

    Read the article

  • Unexpected advantage of Engineered Systems

    - by user12244672
    It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

    Read the article

  • How can I upgrade to Lubuntu 14.04.1 withot a PAE kernel?

    - by Richard
    On my Dell Latitude D800 laptop, which has an old Pentium M without PAE support, I was able to successfully install Lubuntu 14.04 from the CD. When I try to upgrade, I get the error: PAE not enabled Your system uses a CPU that does not have PAE enabled. Ubuntu only supports non-PAE systems up to Ubuntu 12.04. To upgrade to a later version of Ubuntu, you must enable PAE (if this is possible) see: http://help.ubuntu.com/community/EnablingPAE I have seen the Communit Wiki page for PAE. The suggestion is to add forcepae to the command line options. When I do this, I get the same message. Moreover, dmesg does not indicate PAE was ever enabled. Is there anything else I can ry to get Lubuntu to upgrade correctly?

    Read the article

  • Graphic card for parallel programming vs traditional methods

    - by Sambatyon
    With a simple search in amazon one can see that the modern approach for parallel programming is to use your graphic card. However I am still a little bit skeptical about it. My last computer has an 8 core CPU which I need is enough for basic all my parallel needs, if I need more I will probably use MPI through a network using my old machines. All in all, Why and/or when should I use CUDA or another method which uses my graphic card instead of traditional methods like pthreads, java threads, boost threads or the new C++ 11 threads? What about using processes?

    Read the article

  • How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

    - by Travis Allen
    So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

    Read the article

  • Why does starting a program log me out?

    - by Bruce McKean
    I'm not a computer nerd but have been able to fix Ubuntu/Linux problems in the pass two years with a Google search but this on has me stumped. I upgraded to 12.04 about thirty days ago and all was well except that every time I tried to load KeePassX it would go to the login screen. I installed KeePass2 and all seemed to work. Last week I tried to load Bibble5 (Raw photo editor) and it would try to load and then back to the login screen. After a few days I gave up and downloaded Corel After Shot Pro (Corel's now owns Bibble5) and it has the same problem. Could someone please head me into the steps I need to follow to find out what is the cause? I'm interested in learning more about the Linux system. How to correct any future problems like this? Computer Specification: Processor : 8x Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz Memory : 8155MB (1092MB used) Operating System : Ubuntu 12.04 LTS Graphics Card : GeForce GT 520/PCIe/SSE2

    Read the article

  • msvcrt: memory usage goes wild, but not under debugger

    - by al_miro
    I have a C++ code compiled with Intel compiler, 32bit, in MS VC6 mode, so using either msvcrt.dll or msvcrtd.dll. The process makes heavy memory allocation and deallocation. I monitor the memory usage with WMI and look at VirtualSize and WorkingSetSize. with debug runtime (msvcrtd.dll): virtual constant 1.7GB, working constant 1.2GB with non-debug runtime (msvcrt.dll): virtual raising 1.7-- 2.1GB, working raising 1.2-1.4GB with non-debug runtime but under debugger (windbg): virtual constant 1.7GB, working constant At 2.1 GB virtual the process is crashing (as expected). But why would the virtual usage increase only with (non-debug) msvcrt.dll and only if not under debugger? In all cases compilation flags are identical, only runtime libs are different.

    Read the article

  • List of Appindicators

    - by user8592
    I installed Ubuntu 11.04 on one of my systems and I am using Unity interface. Unity is working quite nice so far but i really miss panel applets for net speed, cpu temp, and system monitor. These applets show useful quickinfo and unlike 10.10 there is no way to get these on panel or unity launcher. There are solutions like screenlets and conky but they don't feel appropriate for a clean desktop look. If you know then please list out any third party indicators with links so that they can be found at one place.

    Read the article

  • Ubuntu 12.10 Unity Dash transparency problem

    - by madox2
    I have just upgraded my Ubuntu 12.04 to 12.10 and there is following problem. When I press super button to show Unity Dash I get wrong background image behind the dash box. Especially I can see part of the bottom of the screen. Also when I set transparency to top panel the background behind is not correct. Here is an example with Mc Duck picture: Unity Mc Duck example Do you have any ideas whats wrong? My system preferences: Ubuntu 12.10 32-bit Intel® Pentium(R) CPU G840 @ 2.80GHz × 2 GeForce GTS 450/PCIe/SSE2 Any help will be highly appreciated!

    Read the article

  • When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

    - by Jessica K
    I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

    Read the article

  • Fan very loud in Ubuntu 12.10

    - by Jon
    I recently installed 12.10 on my Desktop PC, moving away from Windows 7. For some reason, the fan in my computer is making an enormous amount of noise (it is running at full speed constantly). Under Windows 7, the fan would slow itself down and run at an acceptable noise level. Now, it is nearly unbearable. Checked the processes, and none are taking up a huge load on the CPU. Please help as I really can't endure this noise, and I do not want to go back to Windows 7 on this box. Some specs: - Intel 2.26 duo core - ATI 4870 - 4GB - 650W power supply

    Read the article

  • Test of procedure is fine but when called from a menu gives uninitialized errors. C

    - by Delfic
    The language is portuguese, but I think you get the picture. My main calls only the menu function (the function in comment is the test which works). In the menu i introduce the option 1 which calls the same function. But there's something wrong. If i test it solely on the input: (1/1)x^2 //it reads the polinomyal (2/1) //reads the rational and returns 4 (you can guess what it does, calculates the value of an instace of x over a rational) My polinomyals are linear linked lists with a coeficient (rational) and a degree (int) int main () { menu_interactivo (); // instanciacao (); return 0; } void menu_interactivo(void) { int i; do{ printf("1. Instanciacao de um polinomio com um escalar\n"); printf("2. Multiplicacao de um polinomio por um escalar\n"); printf("3. Soma de dois polinomios\n"); printf("4. Multiplicacao de dois polinomios\n"); printf("5. Divisao de dois polinomios\n"); printf("0. Sair\n"); scanf ("%d", &i); switch (i) { case 0: exit(0); break; case 1: instanciacao (); break; case 2: multiplicacao_esc (); break; case 3: somar_pol (); break; case 4: multiplicacao_pol (); break; case 5: divisao_pol (); break; default:printf("O numero introduzido nao e valido!\n"); } } while (i != 0); } When i call it with the menu, with the same input, it does not stop reading the polinomyal (I know this because it does not ask me for the rational as on the other example) I've run it with valgrind --track-origins=yes returning the following: ==17482== Memcheck, a memory error detector ==17482== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==17482== Using Valgrind-3.5.0 and LibVEX; rerun with -h for copyright info ==17482== Command: ./teste ==17482== 1. Instanciacao de um polinomio com um escalar 2. Multiplicacao de um polinomio por um escalar 3. Soma de dois polinomios 4. Multiplicacao de dois polinomios 5. Divisao de dois polinomios 0. Sair 1 Introduza um polinomio na forma (n0/d0)x^e0 + (n1/d1)x^e1 + ... + (nk/dk)^ek, com ei > e(i+1): (1/1)x^2 ==17482== Conditional jump or move depends on uninitialised value(s) ==17482== at 0x401126: simplifica_f (fraccoes.c:53) ==17482== by 0x4010CB: le_f (fraccoes.c:30) ==17482== by 0x400CDA: le_pol (polinomios.c:156) ==17482== by 0x400817: instanciacao (t4.c:14) ==17482== by 0x40098C: menu_interactivo (t4.c:68) ==17482== by 0x4009BF: main (t4.c:86) ==17482== Uninitialised value was created by a stack allocation ==17482== at 0x401048: le_f (fraccoes.c:19) ==17482== ==17482== Conditional jump or move depends on uninitialised value(s) ==17482== at 0x400D03: le_pol (polinomios.c:163) ==17482== by 0x400817: instanciacao (t4.c:14) ==17482== by 0x40098C: menu_interactivo (t4.c:68) ==17482== by 0x4009BF: main (t4.c:86) ==17482== Uninitialised value was created by a stack allocation ==17482== at 0x401048: le_f (fraccoes.c:19) ==17482== I will now give you the functions which are called void le_pol (pol *p) { fraccao f; int e; char c; printf ("Introduza um polinomio na forma (n0/d0)x^e0 + (n1/d1)x^e1 + ... + (nk/dk)^ek,\n"); printf("com ei > e(i+1):\n"); *p = NULL; do { le_f (&f); getchar(); getchar(); scanf ("%d", &e); if (f.n != 0) *p = add (*p, f, e); c = getchar (); if (c != '\n') { getchar(); getchar(); } } while (c != '\n'); } void instanciacao (void) { pol p1; fraccao f; le_pol (&p1); printf ("Insira uma fraccao na forma (n/d):\n"); le_f (&f); escreve_f(inst_esc_pol(p1, f)); } void le_f (fraccao *f) { int n, d; getchar (); scanf ("%d", &n); getchar (); scanf ("%d", &d); getchar (); assert (d != 0); *f = simplifica_f(cria_f(n, d)); } simplifica_f simplifies a rational and cria_f creates a rationa given the numerator and the denominator Can someone help me please? Thanks in advance. If you want me to provide some tests, just post it. See ya.

    Read the article

  • Frequent GUI pauses in Ubuntu 13.04 / Unity / Intel HD4000

    - by Simon
    I'm experiencing very frequent (and regular) GUI pauses on my system. Every 30 seconds (pretty much exactly) the GUI will freeze for maybe .25 to .5 seconds. The mouse stops moving, keys stop echoing and a stopwatch timer briefly pauses. I'm using the Intel Graphics driver available from: https://download.01.org/gfx/ubuntu/13.04/main I've looked in a few places and tried a few things for a solution: I've checked cron and anacron for scheduled processes. I've disabled background processes (eg mysql, postgres, apache) not that these were doing anything anyway I've checked the following posts and tried the suggestions there: Unity GUI pauses/freezes for less than a few seconds How to go about troubleshooting frequent system pauses I've watched the system using top and System Monitor and there are no spikes (or even blips) of cpu usage when the pauses occur. There are no obvious error messages in dmesg or syslog There is loads of free RAM (8GB+) and no swap usage If it helps it's a ZooStorm i5 laptop with a HD4000 GPU, 16GB Ram and an SSD. Any help / suggestions would be very gratefully received.

    Read the article

  • packhard bell dot s netbook ubuntu 12.10

    - by Kermit
    sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

    Read the article

  • Low process priority problem

    - by Svepe
    I have just set Ubuntu 12.04 64bit with Cinnamon desktop and 3.5.0-030500 kernel on my new laptop with IvyBridge i7. I decided to test its performance by running a single threaded CPU-hungry program that I often use for camera calibration. Unfortunately, it ended up running much slower than I have ever expected. After some investigation it turned out that the program priority is automatically changed from normal to low which makes the program even slower. I have also noticed that all user programs such as Skype and Firefox are set to low priority. I tried manually resetting the priority to normal or even very high using the "renice" command, which works temporary until the kernel scheduler (I guess) resets the priority to low. Is this a normal behaviour and how can I overcome the problem with slowing down the execution? P.S. I also tried with the 3.2 kernel, but the problem is still present.

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >