Search Results

Search found 12730 results on 510 pages for 'trusted root'.

Page 133/510 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Crypted partition in clear, how crypt?

    - by bux
    I've crypted my home partition like that: root@mycomputer:# ecryptfs-migrate-home -u bux After 1 hour ecryptfs done his work. fine. To check it, i connect with root on TTY1 just after boot. I seen my files in /home/bux.HfooOU2x was not crypted ! cat /home/bux.HfooOU2x/.bashrc # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples Error is mine ? How crypt this home folder ? Thank's ;)

    Read the article

  • Ivy bridge i3 recognized as Xeon e3-1200

    - by user287072
    The situation: I've got a Ivy bridge i3 3225 which is being recognized as a Xeon e3-1200 series cpu by Ubuntu 14.04 64bit. The problem: cpu fan makes more noise than necessary (under dual-boot Win8 the fans are off), cannot install the intel graphics drivers from 01.org. Goals: - find a fix for the load fans could be they are not CPU related, I've tried some fan controller packages, but they made no difference. - get the intel graphics to install (this now fails as xeon cpu's are not supported, I got the package working on a i5 laptop) - get to know some more about how hardware recognition works Tried so far: - a reinstall of Ubuntu, but it was recognized again as a Xeon cpu. - different fan control packages, but they either do not recognized the fans, or just keep fan speed to high. Any pointers as how to get Ubuntu recognized it are more than welcome. lspci -nnQ 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK106 [GeForce GTX 660] [10de:11c0] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GK106 HDMI Audio Controller [10de:0e0b] (rev a1) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03)

    Read the article

  • url mod_rewrite

    - by Pritam Borkar
    I had an e-commerce website hosted on http://mydomain.com/beta for more than a year, eventually I decided to move the website to root http://mydomain.com I had done quite a lot of link postings to forums etc, when my site used to be hosted in the sub-dir /beta . Is there any way to do a mod_rewrite by which all the old links that I have posted do not return as broken links since now longer the site is hosted in /beta and is now hosted on the site root. I did read that mod_rewrite can help resolve this issue, but also read about that this has to be done with care. Just a tip that this site is using Friendl URL.

    Read the article

  • Mount and unmount errors when usb is connected in 12.10.

    - by Mysterio
    I just installed 12.10 and noticed some strange behaviour every time I connect a USB storage device. It reports I already have the device mounted by a different user but there is only one user account on this set up. Here is a picture of the dialogue: Also when I try to mount the inserted USB drive, I have to enter gain root privileges before the device will unmount successfully. Like this: . I can't copy/delete any file without root access either with the default file manager or third party file manager, Marlin. How do I resolve this rather frustrating experience? Thanks in advance.

    Read the article

  • Migrating Virtual Iron guest to Oracle VM 3.x

    - by scoter
    As stated on the official site, Oracle in 2009, acquired a provider of server virtualization management software named Virtual Iron; you can find all the acquisition details at this link. Into the FAQ on the official site you can also view that, for the future, Oracle plans to fully integrate Virtual Iron technology into Oracle VM products, and any enhancements will be delivered as a part of the combined solution; this is what is going on with Oracle VM 3.x. So, customers started asking us to migrate Virtual Iron guests to Oracle VM. IMPORTANT: This procedure needs a dedicated OVM-Server with no-guests running on top; be careful while execute this procedure on production environments. In these little steps you will find how-to migrate, as fast as possible, your guests between VI ( Virtual Iron ) and Oracle VM; keep in mind that OracleVM has a built-in P2V utility ( Official Documentation )  that you can use to migrate guests between VI and Oracle VM. Concepts: VI repositories.  On VI we have the same "repository" concept as in Oracle VM; the difference between these two products is that VI use a raw-lun as repository ( instead of using ocfs2 and its capabilities, like ref-links ). The VI "raw-lun" repository, with a pure operating-system perspective, may be presented as in this picture: Infact on this "raw-lun" VI create an LVM2 volume-group. The VI "raw-lun" repository, with an hypervisor perspective, may be presented as in this picture: So, the relationships are: LVM2-Volume-Group <-> VI Repository LVM2-Logical-Volume <-> VI guest virtual-disk The first step is to present the VI repository ( raw-lun ) to your dedicated OVM-Server. Prepare dedicated OVM-Server On the OVM-Server ( OVS ) you need to discover new lun and, after that, discover volume-group and logical-volumes containted in VI repository; due to default OVS configuration you need to edit lvm2 configuration file: /etc/lvm/lvm.conf     # By default for OVS we restrict every block device:     # filter = [ "r/.*/" ] and comment the line starting with "filter" as above. Now you have to discover the raw-lun presented and, next, activate volume-group and logical-volumes: #!/bin/bash for HOST in `ls /sys/class/scsi_host`;do echo '- - -' > /sys/class/scsi_host/$HOST/scan; done CPATH=`pwd` cd /dev for DEVICE in `ls sd[a-z] sd?[a-z]`;do echo '1' > /sys/block/$DEVICE/device/rescan; done cd $CPATH cd /dev/mapper for PARTITION in `ls *[a-z] *?[a-z]`;do partprobe /dev/mapper/$PARTITION; done cd $CPATH vgchange -a yAfter that you will see a new device:[root@ovs01 ~]# cd /dev/6000F4B00000000000210135bef64994[root@ovs01 6000F4B00000000000210135bef64994]# ls -l 6000F4B0000000000061013* lrwxrwxrwx 1 root root 77 Oct 29 10:50 6000F4B00000000000610135c3a0b8cb -> /dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb By your OVM-Manager create a guest server with the same definition as on VI:same core number as VI source guestsame memory as VI source guestsame number of disks as VI source guest ( you can create OVS virtual disk with a small size of 1GB because the "clone" will, eventually, extend the size of your new virtual disks )Summarizing:source-virtual-disk path ( VI ):/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cbdest-virtual-disk path ( OVS ):/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img ** ** = to identify your virtual disk you have verify its name under the "vm.cfg" file of your new guest.Clone VI virtual-disk to OVS virtual-diskdd if=/dev/mapper/6000F4B00000000000210135bef64994-6000F4B00000000000610135c3a0b8cb of=/OVS/Repositories/0004fb00000300006cfeb81c12f12f00/VirtualDisks/0004fb000012000055e0fc4c5c8a35ee.img Clean unsupported parameters and changes on OVS.1. Restore original /etc/lvm/lvm.conf    # By default for OVS we restrict every block device:     filter = [ "r/.*/" ]    and uncomment the line starting with "filter" as above.2. Force-stop lvm2-monitor service  # service lvm2-monitor force-stop 3. Restore original /etc/lvm directories ( archive, backup and cache )  # cd /etc/lvm  # rm -fr archive backup cache; mkdir archive backup cache4. Reboot OVSRefresh OVS repository and start your guest.By OracleVM Manager refresh your repository:By OracleVM Manager start your "migrated" guest: Comments and corrections are welcome.  Simon COTER 

    Read the article

  • Migrating Ruby on Rails Website to New Server (Linux)

    - by GarytheWorm
    I have an existing website that is a Ruby on Rails project. I have another server i need to transfer the existing website too. The server i wish to transfer too was originally hosting the website so has the necessary gems/configuration are installed. I have tar the current releases shared dir from the old server and transfered them over to the new server. I have then unpack the tar in the apps directory to the new location which is a different URL path. My problem is now as you can see below that the path on the current - is pointing to the old url. ( i ran ls -la to see owenership) How can i change this current path to read with my new web address? current releases shared sitepack.tar root@server1:/var/www/clients/client1/NEWSITE.com/web/apps# ls -la current - /var/www/OLDSITE.com/web/apps/releases/20120130171636 root@server1:/var/www/clients/client1/NEWSITE.com/web/apps#

    Read the article

  • Solera Networks Threat Predictions for 2012, Solutions

    Legitimate sites are often trusted by their visitors, which makes them a perfect target for cybercriminals. Solera lists attacks on legitimate, yet compromised sites as a growing trend for 2012 due to the increased amount of such sites containing unpatched vulnerabilities. Once compromised, hackers can use the legitimate sites to redirect unsuspecting visitors and put them in harm's way. According to Solera, malicious spam is another undesirable item that should increase in 2012. Various methods, such as email, instant messaging, attachments, malicious links, and social networks will cont...

    Read the article

  • Move Joomla website to new folder

    - by Jon
    I currently have a website. I have created a new folder on the website called V2. Under this folder I have installed Joomla and configured my new looking site. I now want to make V2 the default website. I could point the website to that V2 directory however I have other folders under the current root website that I need to keep. How can I transfer V2 to the root of my website? Is it just a case of copying all the files?

    Read the article

  • GRUB2 panic: "No such partition"

    - by Android Eve
    I managed to install 10.04 on a system that already has 8.04 (separate partitions, of course). It also installed GRUB2 onto the MBR. After discovering that there is no menu.lst anymore, I edited /etc/grub.d/40_custom to point to where my other OS partitions are: menuentry "Ubuntu 8.04" { set root=(hd0,0) linux /boot/vmlinuz-2.6.24-28-generic initrd /boot/initrd.img-2.6.24-28-generic } menuentry "Windows 7 Ultimate 64-bit" { set root=(hd0,2) chainloader (hd0,2)+1 } GRUB2 displays the menu with those entries but when I select any of them, it refuses to load them, saying "No such partition". I know the partitions are there, as 10.04's "Disk Utility" sees them without any problem. How do I get GRUB2 to recognize them?

    Read the article

  • Problem in calling a method recursively in nodejs mongodb [closed]

    - by Nilesh
    I am trying to create a tree using nodejs and mongodb.Wanted to show a path of a particulr node from the root.So I am finding the destination path and looping back to its parent iteratively until the root.So this is the snippet I am using which results in infinite looping articleProvider.finditsparent(t,function(error,tap){ if(tap[0].parent=='null') { t=(tap[0].parent); console.log(n); } else { n.push(tap[0].parent); console.log(tap[0].parent); t=(tap[0].parent); res.send(n); } }); res.send(n); }); How should I get rid of this problem?Is there any way to call it recursively?

    Read the article

  • Zenoss Setup for Windows Servers

    - by Jay Fox
    Recently I was saddled with standing up Zenoss for our enterprise.  We're running about 1200 servers, so manually touching each box was not an option.  We use LANDesk for a lot of automated installs and patching - more about that later.The steps below may not necessarily have to be completed in this order - it's just the way I did it.STEP ONE:Setup a standard AD user.  We want to do this so there's minimal security exposure.  Call the account what ever you want "domain/zenoss" for our examples.***********************************************************STEP TWO:Make the following local groups accessible by your zenoss account.Distributed COM UsersPerformance Monitor UsersEvent Log Readers (which doesn't exist on pre-2008 machines)Here's the Powershell script I used to setup access to these local groups:# Created to add Active Directory account to local groups# Must be run from elevated prompt, with permissions on the remote machine(s).# Create txt file should contain the names of the machines that need the account added, one per line.# Script will process machines line by line.foreach($i in (gc c:\tmp\computers.txt)){# Add the user to the first group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Distributed COM Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the second group$objUser=[ADSI]("WinNT://domain/zenoss")$objGroup=[ADSI]("WinNT://$i/Performance Monitor Users")$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)# Add the user to the third group - Group doesn't exist on < Server 2008#$objUser=[ADSI]("WinNT://domain/zenoss")#$objGroup=[ADSI]("WinNT://$i/Event Log Readers")#$objGroup.PSBase.Invoke("Add",$objUser.PSBase.Path)}**********************************************************STEP THREE:Setup security on the machines namespace so our domain/zenoss account can access itThe default namespace for zenoss is:  root/cimv2Here's the Powershell script:#Grant account defined below (line 11) access to WMI Namespace#Has to be run as account with permissions on remote machinefunction get-sid{Param ($DSIdentity)$ID = new-object System.Security.Principal.NTAccount($DSIdentity)return $ID.Translate( [System.Security.Principal.SecurityIdentifier] ).toString()}$sid = get-sid "domain\zenoss"$SDDL = "A;;CCWP;;;$sid" $DCOMSDDL = "A;;CCDCRP;;;$sid"$computers = Get-Content "c:\tmp\computers.txt"foreach ($strcomputer in $computers){    $Reg = [WMIClass]"\\$strcomputer\root\default:StdRegProv"    $DCOM = $Reg.GetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction").uValue    $security = Get-WmiObject -ComputerName $strcomputer -Namespace root/cimv2 -Class __SystemSecurity    $converter = new-object system.management.ManagementClass Win32_SecurityDescriptorHelper    $binarySD = @($null)    $result = $security.PsBase.InvokeMethod("GetSD",$binarySD)    $outsddl = $converter.BinarySDToSDDL($binarySD[0])    $outDCOMSDDL = $converter.BinarySDToSDDL($DCOM)    $newSDDL = $outsddl.SDDL += "(" + $SDDL + ")"    $newDCOMSDDL = $outDCOMSDDL.SDDL += "(" + $DCOMSDDL + ")"    $WMIbinarySD = $converter.SDDLToBinarySD($newSDDL)    $WMIconvertedPermissions = ,$WMIbinarySD.BinarySD    $DCOMbinarySD = $converter.SDDLToBinarySD($newDCOMSDDL)    $DCOMconvertedPermissions = ,$DCOMbinarySD.BinarySD    $result = $security.PsBase.InvokeMethod("SetSD",$WMIconvertedPermissions)     $result = $Reg.SetBinaryValue(2147483650,"software\microsoft\ole","MachineLaunchRestriction", $DCOMbinarySD.binarySD)}***********************************************************STEP FOUR:Get the SID for our zenoss account.Powershell#Provide AD User get SID$objUser = New-Object System.Security.Principal.NTAccount("domain", "zenoss") $strSID = $objUser.Translate([System.Security.Principal.SecurityIdentifier]) $strSID.Value******************************************************************STEP FIVE:Modify the Service Control Manager to allow access to the zenoss AD account.This command can be run from an elevated command line, or through Powershellsc sdset scmanager "D:(A;;CC;;;AU)(A;;CCLCRPRC;;;IU)(A;;CCLCRPRC;;;SU)(A;;CCLCRPWPRC;;;SY)(A;;KA;;;BA)(A;;CCLCRPRC;;;PUT_YOUR_SID_HERE_FROM STEP_FOUR)S:(AU;FA;KA;;;WD)(AU;OIIOFA;GA;;;WD)"******************************************************************In step two the script plows through a txt file that processes each computer listed on each line.  For the other scripts I ran them on each machine using LANDesk.  You can probably edit those scripts to process a text file as well.That's what got me off the ground monitoring the machines using Zenoss.  Hopefully this is helpful for you.  Watch the line breaks when copy the scripts.

    Read the article

  • EBS Accounts Payables Customer Advisory

    - by cwarticki
    Blogging to let you know of an important set of Oracle Payables patches that were released for R12.1 customers.  Accounts Payable Customer Advisory: Dear Valued Oracle Support Customer, Since the release of R12.1.3 a number of recommended Payables patches have been made available as standalone patches, to help address important business process incidents. Adoption of these patches is highly recommended. To further facilitate adoption of these Payables patches Oracle has consolidated them into a single Recommended Patch Collection (RPC). The RPC is a collection of recommended Payables patches created with the following goals in mind: Stability: Help address issues that are identified by Oracle Development and Oracle Software Support that may interfere with the normal completion of important business processes such as period close. Root Cause Fixes: Help make available root cause fix for data integrity that may delay period close, normal invoice flow and other business actions. Compact: Keep the file footprint as small as possible to help facilitate the install process and minimize testing. Granular: Collection of patches based on functional area that allows customer to apply, based on their individual needs and goals, all three RPC’s at once or in phases. Payables: -          New AP RPC (14273383:R12.AP.B) has all data corruption root cause fixes known to date plus tons of other crucial fixes (Note: 1397581.1). -          Companion must have RPCs: o   Note: 1481221.1: R12.1: Payments Recommended Patch Collection (IBY RPC), August 2012 o   Note: 1481235.1: R12.1: E-Business Tax Recommended Patch Collection (ZX RPC), August 2012 o   Note: 1481222.1: R12.1: Sub Ledger Accounting (SLA) Recommended Patch Collection (XLA RPC), August 2012 -          This time we beat the system far harder on testing and it held up remarkably well. We could not get any data corruption events in the Invoice Cancel/Discard flow (that is the #1 generator) neither we could cause Orphan Events in the system. Therefore this is very good code. Financials: -          ALL FIN modules now have RPCs: full listing is in (Note: 954704.1)

    Read the article

  • I need help installing Ubuntu 11.10 to multi-drive system

    - by CookyMonzta
    I have a machine with 3 hard drives; the primary, which is 750GB (drive 0), and 2 others, each of which is 640GB (drives 1 and 2). On the last screen before the actual installation begins, this is how my hard drive configuration looks: /dev/sda [DISK0, 750GB] /dev/sda1 ntfs 104MB [Win7 System Reserved] /dev/sda2 ntfs 499,997MB [Windows 7 Pro] free space 250,052MB [This space intended for Windows 8] /dev/sdb [DISK1, 640GB] /dev/sdb1 ntfs 400,085MB [Windows XP Pro] free space 240,049MB [This space intended for Ubuntu] /dev/sdc [DISK2, 640GB] [This drive intended for various backups] free space 160,033MB /dev/sdc5 ntfs 480,101MB [Acronis Secure Zone] As you can see, I have 3 drives, all SATA. I have Win7 on my first drive (0), WinXP on my second drive (1) and a secure zone for daily backups on my third drive (2). I want to put Ubuntu 11.10 Oneiric Ocelot on the drive that also has XP. I've already used 400GB for XP and I have 240GB remaining, for which, my intention was to create a 4GB swap file and use the rest for Ubuntu itself. This is what my second hard drive looked like, for my intended setup before installation: /dev/sdb /dev/sdb5 swap 4,095MB [Linux swap] /dev/sdb6 ext4 235,951MB [Ubuntu 11.10] Needless to say, this is only the second time I have attempted to install Linux. I managed to get 7.10 Gutsy Gibbon working on an old machine. I have two problems with this installation: Ubuntu asks for a location to install the boot loader (i.e., "Device for Boot Loader Installation"). I already have a boot loader; namely, Acronis OS Selector (from Acronis Disk Director 11). So I decided to put the Ubuntu boot loader in /dev/sdb6 (where I intend to install Ubuntu), to keep it from interfering with my Acronis OS Selector. Once I hit "Install now", I ended up with the following error: "No root file system is defined. Please correct this from the partitioning menu." What am I missing? Did I attempt to put the boot loader in the wrong place? I assume I did, because as I am writing this entry, I am looking at LinuxIdentity.com's Ubuntu 11.04 Natty Narwhal magazine, and I see a screenshot (Figure 7 on Page 13) that implies that the boot loader can be installed anywhere, including the first hard drive (in the MBR, which would obviously force me to reinstall the Acronis OS Selector) or even on a floppy. But why do I get an undefined root file system error? I thought /dev/sdb6 was the root file. Obviously I'm missing something in the installation procedure. Should I try installing it in Windows using the WUBI Installer? I assume that, if I attempt to install Ubuntu from WinXP (on the second drive), it will automatically install Ubuntu on the empty partition alongside XP. But will I have the option of creating a swap partition? And what if the WUBI Installer searches all of my drives and decides to install Ubuntu on my first drive's empty partition (which I have left empty for Win8 upon its release)?

    Read the article

  • Why does my RAID configuration with mdadm fail on reboots?

    - by Andy B
    I have been running Ubuntu server on my machine for 2 years and it has worked ok. I would like to speed it up by raiding a few drives. The machine is used to host my Mysql databases internally. using MDADM raid.. I have tried 2 schemes so far with the 3 drives. 2 partitions on each drive 1 for the swap 1 for the O/S both of them turned into drives raid level 5 3 partitions on each drive 1 for the boot 1 for the swap and 1 for the root. The boot I set to raid level1 and the swap and root raid drives were set to level5 Both setup worked fine for about a week, then on a reboot things fall apart. by fall apart I mean I end up with a bunch of hard drive errors on the screen and then get a grub prompt. Why do they fail on reboots? I am eager to understand what I am doing wrong thanks!

    Read the article

  • Running a startup program in terminal as sudo

    - by Brandon
    I need to run a python script in a terminal, myscript.py at startup (on Lubunt). This script requires root. I've setup a .desktop file that runs the following command: lxterminal --command="python /home/d/Jarvis/alarm.py && /bin/bash" The terminal window opens at startup and runs the script, but then closes when the Python script returns an error (because it's not being run as root). When I change the Exec= to this... lxterminal --command="sudo python /home/d/Jarvis/alarm.py && /bin/bash" ... (prefixing command with 'sudo') which works. However, the terminal opens on startup and displays the [sudo] password for d: \ prompt, requiring me to input my password. I would like the execution of the python script at startup to be completely automatic with no user interaction. How can I accomplish this?

    Read the article

  • Reading the tea leaves from Windows Azure support

    - by jamiet
    A few idle thoughts… Three months ago I had an issue regarding Windows Azure where I was unable to login to the management portal. At the time I contacted Azure support, the issue was soon resolved and I thought no more about it. Until today that is when I received an email from Azure support providing a detailed analysis of the root cause, the fix and moreover precise details about when and where things occurred. The email itself is interesting and I have included the entirety of it below. A few things were interesting to me: The level of detail and the diligence in investigating and reporting the issue I found really rather impressive. They even outline the number of users that were affected (127 in case you can’t be bothered reading). Compare this to the quite pathetic support that another division within Microsoft, Skype, provided to Greg Low recently: Skype support and dead parrot sketches   This line: “Windows Azure performed a planned change from using the Microsoft account service (formerly Windows Live ID) to the Azure Active Directory (AAD) as its primary authentication mechanism on August 24th. This change was made to enable future innovation in the area of authentication – particularly for organizationally owned identities, identity federation, stronger authentication methods and compliance certification. ” I also found to be particularly interesting. I have long thought that one of the reasons Microsoft has proved to be such a money-making machine in the enterprise is because they provide the infrastructure and then upsell on top of that – and nothing is more infrastructural than Active Directory. It has struck me of late that they are trying to make the same play of late in the cloud by tying all their services into Azure Active Directory and here we see a clear indication of that by making AAD the authentication mechanism for anyone using Windows Azure. I get the feeling that we’re going to hear much much more about AAD in the future; isn’t it about time we could log on to SQL Azure Windows Azure SQL Database without resorting to SQL authentication, for example? And why do Microsoft have two identity providers – Microsoft Account (aka Windows Live ID) and AAD – isn’t it about time those things were combined? As I said, just some idle thoughts. Below is the transcript of the email if you are interested. @Jamiet  This is regarding the support request <redacted> where in you were not able to login into the windows azure management portal with live id. We are providing you with the summary, root cause analysis and information about permanent fix: Incident Title: You were unable to access Windows Azure Portal after Microsoft Account to Azure Active Directory account Migration. Service Impacted: Management Portal Incident Start Date and Time: 8/24/2012 4:30:00 PM Date and Time Service was Restored: 10/17/2012 12:00:00 AM Summary: Windows Azure performed a planned change from using the Microsoft account service (formerly Windows Live ID) to the Azure Active Directory (AAD) as its primary authentication mechanism on August 24th.   This change was made to enable future innovation in the area of authentication – particularly for organizationally owned identities, identity federation, stronger authentication methods and compliance certification.   While this migration was largely transparent to Windows Azure users, a small number of users whose sign-in names were part of a Windows Live Custom Domain were unable to login.   This incompatibility was not discovered during the Quality Assurance testing phase prior to the migration. Customer Impact: Customers whose sign-in names were part of a Windows Live Custom Domain were unable to sign-in the Management Portal after ~4:00 p.m. PST on August 24th, 2012.   We determined that the issue did impact at least 127 users in 98 of these Windows Live Custom Domains and had a maximum potential impact of 1,110 users in total. Root Cause: The root cause of the issue was an incompatibility in the AAD authentication service to handle logins from Microsoft accounts whose sign-in names were part of a Windows Live Custom Domains.  This issue was not discovered during the Quality Assurance testing phase prior to the migration from Microsoft Account (MSA) to AAD. Mitigations: The issue was mitigated for the majority of affected users by 8:20 a.m. PST on August 25th, 2012 by running some internal scripts to correct many known Windows Live Custom Domains.   The remaining affected domains fell into two categories: Windows Live Custom Domains that were not corrected by 8/25/2012. An additional 48 Windows Live Custom Domains were fixed in the weeks following the incident within 2 business days after the AAD team received an escalation from product support regarding those accounts. Windows Live Custom domains that were also provisioned in Office365. Some of the affected Windows Live Custom Domains had already been provisioned in AAD because their owners signed up for Office365 which is a service that also uses AAD.   In these cases the Azure customers had to work around the issue by renaming their Microsoft Account or using a different Microsoft Account to administer their Azure subscription. Permanent Fix: The Azure Active Directory team permanently fixed the issue for all customers on 10/17/2012 in an upgraded release of the AAD service.

    Read the article

  • Inexpensive generation of hierarchical unique IDs

    - by romaninsh
    My application is building a hierarchical structure like this: root = { 'id': 'root', 'children': [ { 'name': 'root_foo', 'children': [] }, { 'id': 'root_foo2', 'children': [ { 'id': 'root_foo2_bar', 'children': [] } ] } ] } in other words, it's a tree of nodes, where each node might have child elements and unique identifier I call "id". When a new child is added, I need to generate a unique identifier for it, however I have two problems: identifiers are getting too long adding many children takes slower, as I need to find first available id My requirement is: naming of a child X must be determined only from the state in their ancestors When I re-generate tree with same contents, the IDs must be same or in other words, when we have nodes A and B, creating child in A, must not affect the name given to children of B. I know that one way to optimize would be to introduce counter in each node and append it to the names which will solve my performance issue, but will not address the issue with the "long identifiers". Could you suggest me the algorithm for quickly coming up with new IDs?

    Read the article

  • Thank you for all partners that attended to our Specialization campaign in Denmark

    - by user12875760
    Oracle’s Specialization Program is a trusted status and brand, which allows our most experienced and committed partners to differentiate themselves in the marketplace and gain a competitive edge by spotlighting their strengths and special skills.Partners can choose where they want to specialize from a wide range of Specializations from Oracle’s growing product portfolio. Click here to read more.

    Read the article

  • Installing ubuntu, asks for user/pass

    - by NickGreen
    Hi there, Im trying to install ubuntu v10.10 64bit on my pc. Unfortunately when I try to boot the installation from my usb-drive the installation begins with asking for a username and password.. I didn't set up a user or a password for that matter, so what username/pass should I fill in. I already tried to submit the form blank and with root / root but without success.. Somebody knows what the right combination is or explain if I'm a complete idiot for not understanding what to do.. Thank you alL!

    Read the article

  • Computer won't reboot without waiting for a while

    - by Benjamin
    I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

    Read the article

  • Why does nothing work after I randomly changed some file permissions?

    - by Josh B
    Ok so last night i was trying to set permissions to some folders in my File System, since apparently im not an admin on my own computer. And now everything got messed up today and i don't know what to do.. I lost my internet, the icon is not showing in the taskbar anymore. I lost my sound, there is no sound devices listed when i go into the sound menu. I can not log into root anymore, it gives me "sudo: must be setuid root" I can not plug anything in anymore, it will not recognize flash drives or external hard drives. It gives me a Internal Error message everytime i log in It doesn't let me log into the Grub screen anymore on boot up. What did i do? I have a lot of files on here i wish to put on a flash drive but it won't recognize it.

    Read the article

  • dig @server doesn't work

    - by JustTrying
    I have Ubuntu 12.04 with BIND9, working just as a caching server (forwarding to 8.8.8.8). When I use, for example, dig +norecurse @l.root-servers.net www.uniroma1.it, I obtain the following output ; << DiG 9.8.1-P1 << +norecurse @l.root-servers.net www.uniroma1.it ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached Using Wireshark I discovered that the outgoing queries are correct, but there aren't any incoming answers. Why? P.S. Using simply dig www.uniroma1.it I obtain the correct answers.

    Read the article

  • update-grub2 not finding windows7 partition..

    - by user3307
    I have Ubuntu10.10 x64 and after installing Windows 7 grub dissapear I log on with my usb to reinstall grub and now grub only shows Ubuntu... Then when I try to do update-grub2 I get this: root@Alienware:~# sudo update-grub2 Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic Found memtest86+ image: /boot/memtest86+.bin ls: no se puede acceder a /var/lib/os-prober/mount/boot Boot: No existe el fichero o el directorio done root@Alienware:~# It is in spanish but it says it cant get access to /var/lib/os-prober/mount/boot and that Boot: dosent exist.. I dont know what I am doing wrong can someone help me please?

    Read the article

  • Redirect Google crawler to different robots.txt via .htaccess

    - by user3474818
    I have googled for the answer all day and still couldn't find an answer. I have a virtual subdomain www.static.example.com which is a mirror site of www.example.com. It means I have just one root folder for subdomain and domain aswell. I want to redirect crawlers to different robots.txt file - robots_static.txt when they see .static in url in which I will forbid indexing via /disallow command. I want to do this because I have duplicated content in Google search results. Subdomain is showing the exact same content as the main domain. Does anyone know how could I achieve that crawlers sees robots_static.txt instead of robots.txt? What I have managed to find so far is this: RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] but when I check in webmaster tools, it still sees robots.txt as my robots file instead of robots_static.txt, so it crawls and index everything twice. What did I do wrong? Thanks EDIT: This is my .htaccess file ## # @package Joomla # @copyright Copyright (C) 2005 - 2013 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^www.static.*$ [NC] RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*robots\.txt.*\ HTTP/ [NC] RewriteRule ^robots\.txt /robots_static.txt [NC,L] ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / RewriteCond %{THE_REQUEST} ^GET.*index\.php [NC] RewriteCond %{THE_REQUEST} !/system/.* RewriteRule (.*?)index\.php/*(.*) /$1$2 [R=301,L] RewriteCond %{THE_REQUEST} ^GET ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. <FilesMatch "\.(ico|pdf|flv|jpg|ttf|jpg|jpeg|png|gif|js|css|swf)$"> Header set Expires "Wed, 15 Apr 2020 20:00:00 GMT" Header set Cache-Control "public" </FilesMatch> <ifModule mod_headers.c> Header set Connection keep-alive </ifModule> ########## Begin - Remove Etags # FileETag none # ########## End - Remove Etags

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >