Search Results

Search found 3831 results on 154 pages for 'w2k8 r2'.

Page 133/154 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Can't resolve offline file conflicts

    - by Bryan
    We use roaming profiles on our Server 2008 R2 domain, with folder redirection for 'desktop', 'my documents' and 'application data'. But as our network is split across two sites, we have one file server at each site, which are configured to use domain based DFS namespaces and DFS replication to keep things in sync. The DFS path for the replication folder is as follows: \\domain\folderredirection$\<username>\<redirected-folder-name> The real paths are \\site-1-server\folderredirection$\<username>\<redirected-folder-name> and \\site-2-server\folderredirection$\<username>\<redirected-folder-name> As our users all switch between sites (sometimes several time per day), our folder redirection policy has to redirect to the DFS roots rather than hardcoded to a specific server. Both DFS and DFS-R have been proven to be working perfectly. On our laptops, we use offline files for the redirected folders, and this also works fine, however the problem is as follows: When conflicts occur in offline files, it is impossible to resolve the conflicts. I'm given the usual conflict resolution options (i.e. 'Ignore', 'Keep Both', 'Keep network' and 'Keep local'), however, not one of these options will resolve any conflict, yet no error is produced. We only use offline files on laptops, which have either Windows XP Professional or Windows 7 Professional installed. The problem is not specific to any one laptop, it affects every laptop and every conflicting file in exactly the same way. I would have thought the set up we have is common for companies that have multiple sites, so I'm hoping someone will have seen this before?

    Read the article

  • IIS 404 custom error

    - by Greg B
    I've deployed an ASP.NET 3.5 app to a 64bit Windows 2003 R2 server. In the web.config I have the following <customErrors mode="RemoteOnly" defaultRedirect="/404/"> <error statusCode="404" redirect="/404/"/> <error statusCode="500" redirect="/500/"/> </customErrors> In the website properties in IIS Manager I have set the 404 and 500 errors to Type = "URL" and the same URLs as in the web.config. I have a wildcard application map to the .NET 2.0 aspnet_isapi.dll with "Verify file exists" turned off. If I try to hit a fake .aspx file I successfully get sent to the 404 page. I belive this is because there is an explicit mapping for .aspx to the .NET DLL. If I try to access a fake directory I simply recieve a plain text response saying: The system cannot find the file specified. It would appear that these requests for directories are not being routed through the .NET pipeline, which is what I would expect (and need) to happen becuase of the wildcard application mapping. Any ideas?

    Read the article

  • New router messed up server 2003 setup...

    - by Aceth
    Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

    Read the article

  • Disabled FRS replication on a DFS link, but the targets still list the replica set in their FRS conf

    - by Graeme Donaldson
    It's been a while since I've had to deal with the wonders of FRS, so I'm doing some testing to refresh my memory. This is what I've done so far. I am stuck with FRS rather than DFS-R for the moment since not all of my link targets are running R2. Created a domain-based DFS root, hosted on 4 servers. Created a DFS link under the root, targeted at 2 servers. The shares on both servers were empty. Dropped about 500MB of data into the target folder on one server and waited for replication to complete. Added/removed/modified files on both targets and confirmed that changes are replicated within a few seconds. Deleted the contents of the target folder on 1 server and waited for the other server to replicate the deletion. All of this worked perfectly, so now I want to remove my DFS link since I only created it for testing purposes. This is where it gets weird. I'm pretty sure that in the past I've disabled replication on the DFS link and after a short amount of time each target would log an info event in the FRS event log, something along the lines of "this server is no longer a member of replica set X". I have waited about 3 hours and I haven't seen this happen. ntfrsutl ds tells me that the server is not a member of any set, which is expected because when I disable replication on the link, the AD attributes on the computer object are removed. The weird part is... ntfrsutl sets still shows me the replica set, with all the properties, etc. So it seems like the FRS-related attributes of the target server's AD object are gone, but the FRS service for some reason hasn't removed the replica set. Can anyone see what I have done wrong?

    Read the article

  • Windows 8 - no internet connetction to some hosts while VPN is active

    - by HTD
    I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

    Read the article

  • vCenter 5.1 SSO Configuration option not available in Web Client?

    - by goober
    Problem I just finished separately installing vCenter Server 5.1. I installed the components separately but on the same machine using a local SQL 2008 R2 DB (not SQL express). Everything appears to be working correctly with the exception of SSO. It doesn't find the AD server. This is to be expected (see below) but I don't know how to fix it. Potential Leads / Steps taken During the install of SSO, I was logged on as a local administrator (waiting on central IT dept to create a service account). As a result, I received a message saying that SSO wouldn't be able to automatically locate the AD. (fair eonugh) After I read up on it a little bit, I believed I could go into the SSO Configuration option in the Web client, like so: However, what I actually see is: I also notice that the "SSO Users and Groups" entry is not there. Betting that has something to do with it as well. Question How can I get the "Configure" Option to show up for SSO? Overall goal: How can I manually enter the AD server in this scenario while logged in as a local administrator? References VMWare vCenter 5.1 Installation: Part 9 (Optional SSO Configuration) [Derek Seaman's Blog] (used the image of correct configuration menu)

    Read the article

  • IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

    - by Maniac13
    I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

    Read the article

  • "Path Not Found" when attempting to write to a sub folder within a mapped drive

    - by Adam
    We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

    Read the article

  • Windows XP laptop doesn't appear in WSUS All computers list

    - by George
    I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

    Read the article

  • Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

    - by Pepperoni Icecream
    When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

    Read the article

  • Backup hardware and strategy on distributed Windows Server 2008 network

    - by CesarGon
    This question is a follow up to this. We have a Windows Server 2008 R2 domain over a network that spans two different buildings, linked by a 100-Mbps point-to-point line. Over 60 users work in the organisation. We are planning to use DFS folders and DFS replication for file serving across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. The idea is to set up a DFS file server in each building and use DFS so that all the contents stay replicated over the 100-Mbps link. We are now considering backup hardware and strategies. We are Dell customers and, after browsing the online Dell catalogue, I can see a number of backup hardware options. My main doubts are the following: Would you go for a tape library, disk backup, or are there other options worth considering? Would you perform batch backups (i.e. nightly) or would you use continuous backup (i.e. while users are working)? Would you use a dedicated backup server to which the tape library (or any other backup device) is attached, or is there any other alternative way of doing things? My experience with backup hardware and overall setup is limited, so I appreciate any good piece of advice that you may have. Thanks.

    Read the article

  • How can adding a server to a domain cause Remote Desktop to stop working?

    - by Adrian Grigore
    I have two dedicated with Windows 2008 R2 servers which I am using for Web hosting. One Server A is a domain controller, Server B should simply be added to the domain controlled by Server A. So I RDP'd into Server B and changed the system settings so that Server B is part of that domain. I entered my domain admin credentials, was welcomed to the domain and asked to reboot the server. So far everything seemed to work smoothly After rebooting, I could not open an RDP connection to Server B anymore: Remote Desktop can’t connect to the remote computer for one of these reasons: 1) Remote access to the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled. I restored an older backup of Server B and switched off the firewall before adding the server to my domain. But the problem reoccurred just the same. What could be the reason for this? The domain is brandnew and I did not change any of the default settings. Could this be some kind of domain-wide default policy that shuts down RDP on any domain clients? Or perhaps it has to do with the fact that Server B is virtual? Thanks for your help, Adrian

    Read the article

  • Performance Test and TCP tuning

    - by Mithir
    We are in the process of performance testing an application which receives tcp requests converts them to soap requests (WCF-httpBinding) which other services work on. The server is Windows Server 2008 R2. The TCP requests are received by TcpListener instance (.NET C#). There are 3 http-binded WCF services running on the same server. We have built a performance test client which goal is to simulate multiple concurrent requests(each request has to be different and recognizable by the application). We built a test running 150 requests that run on the same time (by 150 different threads), and we noticed straight away that some requests get the TCP connection slowly, but once they get it, they act fast. A single request writes twice on the same connection- request and an application ack. Although a single request+ack can take about 150ms, the 150 test takes about 7 seconds. The Problem When we try to run this test from 2 different computers we lose requests. some clients requests are getting no connection was made because the target machine actively refused it So I got here and got convinced it was because of the backlog. I changed the TcpListener parameters and did the registry AFD backlog changes written here but it still didn't work, so I inserted all of the TCP tuning suggested plus some netsh commands which were recommended, but still no change, we still get that error. Is there anything else I need to know? Are there any other solutions?

    Read the article

  • Powershell Copy-Item fails silently

    - by R W
    I have a powershell 2.0 script running on Windows Server 2008 R2 64bit that copies some Hyper-V .vhd files to another server as a 'backup solution'. The script gets a list of the .vhd's to copy then iterates over that list to copy them using Copy-Item. It also writes some logging info to a file as well. The files are copied to another server (Windows Server 2003 Sp2) into a directory compressed with NTFS compression. One of the files isn't copied. It's relatively big ~ 68Gb. The others are 20Gb or less. The wierd thing is that during the copy process the file appears on the destination server and the log file generated seems to indicate the file is copied due to the difference in the times of the log file entries. I see no error messages on the log file and nothing in the event log of either machine. Here's the code that does the copy. Get-ChildItem $VMSource *.vhd -Recurse | foreach-object { $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) started" $fullname = $_.FullName Add-Content $logFileName "$time : Copying $fullname to $VMDestination" Copy-Item $fullname $VMDestination -Force -ErrorAction SilentlyContinue -ErrorVariable errors foreach($error in $errors) { if ($error.Exception -ne $null) { Add-Content $logFileName "'tERROR COPYING FILE : $($error.Exception)" } } $time = Get-Date -format HH.mm.ss Add-Content $logFileName "$time : File Copy ($_) finished" } I can only think there's some problem with copying a file that big to a compressed directory maybe? Any ideas?

    Read the article

  • Setting up Red Hat Enterprise Linux Server as a mail exchange server

    - by Syedur
    I am a Unix/Linux/Windows Server noob. So, keep that in mind before you throw your stones at my glass house. :P I have a Windows Server 2008 R2 machine that's acting as domain controller, Server A. It's also running a DNS server. I have a Red Hat Enterprise Linux Server 5.3, Server B that is intended for mail server. In order for the mail delivery to happen, I understand that I have to set an MX record on Server A and point it to Server B. Well, I did. I manually added a host name on Server A and pointed to Server B's IP address. Then I added an MX record and pointed it to the host name. That didn't do the trick. After taking the above steps, I used the "dig" command on Server B to lookup the MX record coming back from Server A and it wasn't what I was expecting. What am I doing wrong here? I have noticed that... my Windows machines that are joined to the domain (Server A) are listed under the host names. The machines that are not joined to the domain are not list. This is fine, I am not worried about this. What does concern me, do I have to join the Server B to domain in order for Server A to recognize as a valid host and forward the MX properly? If so, some simple steps on how to join Server B to the domain would also help.

    Read the article

  • Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

    - by David Tschoepe
    I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over 100MB/sec at least, I would think (another x335 box is running 70-80MB/sec). The server was recently setup and didn't really notice the problem, but may have been there from the beginning, so not sure. I have installed the IBM ServerRAID Windows utility. The server is running Windows 2008 R2 Web edition (if that matters). I thought maybe one of the drives was bad, so far I have removed one of the drives out of the array and tested again, but still the same results. I'm waiting for the RAID1 to resync and I will try pulling the other drive next. I've also used the ServerRAID utility but haven't noticed anything in there that might indicate a problem. Not sure if I'm on the right path here. So looking for some advice to track this down.

    Read the article

  • IIS7 binding to subdomain causing authentication errors (TFS 2010)

    - by Tommy Jakobsen
    I'm trying to bind a IIS web site (Team Foundation Services 2010) to a subdomain, which is causing authentication errors. First I'll explain what I've done to set it up. This is the fist time I do this, so please correct me if I'm wrong. The web server is a stand-alone Windows Server 2008 R2 x64, running IIS7 with .NET Framework 4. I have the following A-records, pointing to my server: server.mydomain.com *.server.mydomain.com So all subdomains of server.mydomain.com points to the server. In IIS7 I have a web site (TFS 2010) on port 8080, with a virtual directory (named tfs) that is using Windows Authentication. I have one binding on the web site pointing to all unassigned IP addresses, port 8080 and having a host name of tfs.server.mydomain.com. Now, shouldn't I be able to access the virtual directory through: http://tfs.server.mydomain.com/tfs That is not working. However, I can access it through: http://tfs.server.mydomain.com:8080/tfs But, it won't let me authenticate using a Windows account (Server\Username). A windows account that I can authenticate with, when accessing the site through http://localhost:8080/tfs. What am I missing here?

    Read the article

  • Authenticated User Impersonation in Classic ASP under IIS7

    - by user52663
    I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

    Read the article

  • Outlook 2010 OSC with SharePoint 2010 documentation or help

    - by skypanther
    I'm looking for documentation or help to set up Outlook 2010's social connector to work with SharePoint 2010. I can't find much info other than some MS videos and blogs saying that it's possible. They say "we are already connected to SharePoint, so let's add in the XYZ connector..." but don't tell how they connected to SharePoint. Server A: Win2K8 x64, Exchange 2010 x64, domain controller Server B: Win2K8 x64, domain member, SQL Server 2008 R2, SharePoint 2010 Client: Win 7, domain member, with Office 2010 RTM (most every component installed, including the OSC) I've added my domain users to a group. In SharePoint, I granted that domain group permissions to access the site. As any of the domain users, I can use IE to log on the My Sites pages. From there, I can add lists, blog posts, status updates etc. In Outlook, I can add a SharePoint contact to my Contacts list. But, all I see in the People Pane is emails my users have exchanged. I don't see any of the other SharePoint status updates. When I try to use the "Add this person to a social network" link to connect them with my My Sites, the process fails. It doesn't give any sort of error message that helps me figure out why. Just a "Try Again" button that likewise fails. Any guides, links, suggestions? I'm pretty novice-level with SharePoint but mildly adept with the other technologies.

    Read the article

  • MS SQL Server Firewall Ports

    - by mmacaulay
    Hi, I've recently found myself in the position of quickly deploying a production app on SQL Server 2008 (EXPRESS), and I've been having some issues with configuring firewall rules between our web server running the ASP.NET app and our database server. Everything that I can find on the internet claims that I should only need to have TCP ports 1433/1434 and UDP port 1434 accessible on the database server. However, we were unable to get connectivity going between the web app and the database with just those ports. With the help of one of the guys in our datacentre, we discovered that there was traffic also going to TCP port 2242 on the database server. After opening this port, everything worked, but we're not sure why. Later on, I had to reinstall SQL Server due to some disk space issues, and found that the problem had resurfaced - after another session with the packet sniffer, we discovered that this time traffic was going to TCP port 4541 on the database server. My question is, is there some configuration option that I'm missing in SQL server that's making it choose random ports? I'd like to have our firewall rules locked down as much as possible, and of course we'd like to avoid any future mysterious connectivity issues, especially once the app is live. Both servers are running Windows 2003 R2 X64.

    Read the article

  • IIS7 binding to subdomain causing authentication errors

    - by Tommy Jakobsen
    I'm trying to bind a IIS web site to a subdomain, which is causing authentication errors. First I'll explain what I've done to set it up. This is the fist time I do this, so please correct me if I'm wrong. The web server is a stand-alone Windows Server 2008 R2 x64, running IIS7 with .NET Framework 4. I have the following A-records, pointing to my server: server.mydomain.com *.server.mydomain.com So all subdomains of server.mydomain.com points to the server. In IIS7 I have a web site on port 8080, with a virtual directory (named virtual) that is using Windows Authentication. I have one binding on the web site pointing to all unassigned IP addresses, port 8080 and having a host name of sub.server.mydomain.com. Now, shouldn't I be able to access the virtual directory through: http://sub.server.mydomain.com/virtual That is not working. However, I can access it through: http://sub.server.mydomain.com:8080/virtual But, it won't let me authenticate using a Windows account (Server\Username). A windows account that I can authenticate with, when accessing the site through http://localhost:8080/virtual. What am I missing here?

    Read the article

  • IIS 7.5 Siteminder is not protecting ASP.net MVC requests

    - by HariM
    We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

    Read the article

  • Incorrect directory permissions with OpenSSH on Cygwin on Windows Server 2008 SP2

    - by Davy Brion
    I ran into a weird directory permission problem when logged in to a Win2008SP2 (not R2) server through SSH. When I open a local cygwin shell on the server, i can do this: myUser@myServer ~ $ cd /cygdrive/c/Windows/System32/inetsrv/ myUser@myServer /cygdrive/c/Windows/System32/inetsrv $ cd config myUser@myServer /cygdrive/c/Windows/System32/inetsrv/config $ I have no issues accessing the 'config' directory when using a local cygwin shell. 'myUser' has all necessary permissions to access the directory as well. In fact, 'myUser' is a local administrator on the machine. Listing the permissions of the config folder through the local cygwin shell shows the following output: 4 drwx------+ 1 SYSTEM SYSTEM 0 Aug 2 09:38 config But when I log into the server with a SSH client (in this case Putty), i run into the following problem: myUser@myServer ~ $ cd /cygdrive/c/Windows/System32/inetsrv/ myUser@myServer /cygdrive/c/Windows/System32/inetsrv $ cd config -bash: cd: config: Permission denied It also doesn't list the proper permissions through SSH: 0 drwxr-x--- 1 ???????? ???????? 0 Aug 2 09:38 config When I look at the running processes on the server with Task Manager (with a remote desktop connection), it shows that all bash.exe processes are running under the 'myUser' account, so I don't understand why I can't access that particular directory through SSH but have no problems accessing it in a local cygwin shell. I'm using OpenSSH 5.9p1-1. I'm not sure what the Cygwin version is... I used the latest setup.exe (version 2.738) of Cygwin, but I can't seem the find any other Cygwin-related version number. I doubt that it's related to SSH/Cygwin though, because when I connect from the Win2008SP2 server to my local Win7 machine through SSH (using the same OpenSSH/Cygwin versions) I can access the /cygdrive/c/Windows/System32/inetsrv/config folder without issues. Does anyone have an idea on what the issue could be?

    Read the article

  • Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

    - by music2myear
    Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

    Read the article

  • Remote Desktop to Server 2008 fails from one particular Win7 client

    - by Jesse McGrew
    I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >