Search Results

Search found 5287 results on 212 pages for 'pseudo frame'.

Page 135/212 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Excel SUM From Different Sheets IF Date Found

  - by user329005

  I have a workbook with separate sheets for each product (about 20 sheets, adding more on a regular basis). Each product is only available for a certain time frame, and has daily sales data recorded on that product's sheet. I want an overall snapshot across all products from any given date to be consolidated on a new sheet. This would sum from a particular column on each of the other sheets if a corresponding date exists. I have a moderately passable function right now that has a separate VLOOKUP for each product sheet like SUM(IF(ISERROR(VLOOKUP(DATECELL,SHEETNAME!ARRAY,COLUMN... next VLOOKUP, next VLOOKUP etc., but it's incredibly cumbersome to update each function when a new product is added. I'm thinking there's a much easier way utilizing a named group (sheet names), SUMIF, VLOOKUP etc. Then when a new product sheet is added, I can simply add the sheet name to the named group rather than editing all the functions. Any help would be much appreciated!

  Read the article

• Saving 16:9 video in Movie Maker without black border

  - by Tschareck

  I'm editing my video in Windows Live Movie Maker from Live Essentials 2011. My source video is from camera and is .mp4 format with size of 1280 x 720. After editing in Movie Maker, I save the movie. And no matter what option I chose, I always end up with .wmv file, that is either 4:3 image with black stripes above and below the video, or 16:9 with black frame all around the image. What settings should I use, to be able to export or save the video in 1280 x 720 without any black border?

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

• How to map a VPN (tun0) network adapter on host Ubuntu to a VirtualBox guest Windows?

  - by Mashimom

  I have a Ubuntu 10.04 running Oracle VirtualBox 3.2.6 with a Windows XP guest. I use a VPN that I would like to be accessed by the guest VM, on a ifconfig it shows as: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.192.10.99 P-t-P:5.192.10.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1362 Metric:1 RX packets:14151 errors:0 dropped:0 overruns:0 frame:0 TX packets:19860 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4415271 (4.4 MB) TX bytes:17949982 (17.9 MB) Using NAT or Bridge adapters on the VM only gives me the non-vpn adapter. How can I map the tun0 adapter to VirtualBox?

  Read the article

• word 2010 spell checker chokes on Camel Case

  - by Avi

  This is driving me nuts. I'm using Word to summarize books I study. Now, for a term such as BindingOperations.ClearBinding It first complains about why I don't have "Binding Operations". Then why I don't have "Clear Binding". And lastly, even after I add "BindingOperations" and "ClearBinding" to the dictionary, it complains aobut BindingOperations.ClearBinding! My question is: How can I configure Word's spell checker to accept Word1Word2 and CorrectWord1.CorrectWord2 when the spelling of Word1, Word2, CorrectWord1 and CorrectWord2 are correct? edit: I'm embarresed to say I have solved the problem. I just used dashes as in "Frame-Position" instead of FramePosition.

  Read the article

• How to remove IE toolbar and menu bar

  - by Metallikanz

  We have a asp.net web application which will be used in an intranet environment on IE 6. We want to change the default configuration of the browser so that it's always rendered without the Tool Bars, Menu Bars and Address Bar, just the browser window frame and the status bar should be present. We were looking at the IEAK toolkit for IE6 but it doesn't seem to have the option of turning all this off though you can turn off certain menus and toolbar options. Any ideas of how this can be done, is there a group policy setting or something that we can utilize here to get this done? Thanks for your help.

  Read the article

• Linux USB to work as cd rom on mac

  - by user157483

  I am working in driver development in linux USB modules. I have written driver for usb and it is working as cd rom in windows machine 1)I made first partation as fat32 "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" this works fine in windows 2)I made first partation as hfs partation "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" but same thing i applied with hfs partation in MAC it is getting error like this "The disk you inserted was not readable by this computer" in diskutil it is shown as CD-rom but not reading the file system. frame like this Please help me how can I overcome this error...

  Read the article

• What is Paging in memory management?

  - by Fasih Khatib

  I was just reading Operating System Principles by Silberschatz et al when I came across paging in memory management.I'm slightly confused about it. It states that Physical Memory(I assume it's RAM) is divided into frames, and logical memory is divided into pages. CPU generates logical addresses containing page number and an offset. This page number is used to retrieve the frame number from a page table which gives the base address so the physical address is calculated as base+offset. My question is: is the page table maintained for every process? I logically think that the answer would be yes as every process will need to map its own pages to frames. I may be wrong. Please clarify. Also: paging and segmentation(where 'holes' are created in memory) are two totally different techniques that are not used in combination. Correct?

  Read the article

• aireplay - reading but not sending

  - by oneat

  I'm trying aircrack injection, everything is working I authenticated, but aireplay is not working aireplay-ng -3 -b 00:12:2A:01:74:05 -h 78:e4:00:87:71:8b mon0 18:53:03 Waiting for beacon frame (BSSID: 00:12:2A:01:74:05) on channel 7 Saving ARP requests in replay_arp-0817-185303.cap You should also start airodump-ng to capture replies. Read 4988 packets (0 ARPs, 4 ACKs), sent 0 packets...(0 pps) Why isn't it working? Why isn't it sending packets? 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) I tested injection on injection test in aircrack tutorial, despite driver wasn't patched.

  Read the article

• How can I further improve the quality of my home videos?

  - by Bob

  So now that I have found out how to deinterlace my videos, I am wondering if there is other software out there that can further help improve the quality of my videos. Some other problems I have noticed is when you move the camera side to side very quickly you can notice tearing in the the picture. That is the top half of the frame doesn't line up with the bottom half, it appears that the bottom half is shifted to the right or left depending on which way the camera is moving. Shaky camera hand is also a problem in some videos. I don't expect any software to be able to correct these problems 100%, especially the shaky hand. I know that using a tripod or something of the sorts is the best way to prevent the shakes, but for preexsiting videos what are the best solutions I can use?

  Read the article

• Can the Nikon D50 be hacked to record video?

  - by andy

  I mean hacked in terms of software only, and minor hardware hacking if necessary, without of course breaking the camera. Also, if possible, video should be able to be recorded at an acceptable frame rate, around 20fps. thanks p.s. Reason for this question: Just to give some context before people tell me to buy a new camera! For still photography I now almost exclusively shoot film with a Nikon F3, and my D50 is gathering dust. I want to shoot some video of my Capoeria classes, for personal use, and thought maybe I could put my D50 to good use. Yes, I could buy a D5000 or older D90, but really I just want to shoot some video with my nice wide Nikkor lenses at no extra cost!

  Read the article

• What kind of time lapse image stitching software is out there?

  - by AaronLS

  I took a bunch of digital images(jpg format) of a sunrise that I want to make into a time lapse movie. The only recommendation I've seen was some iStopMotion for Mac, but I am running Windows. I would prefer the software to take into account the metadata in the image that indicates what time the image was taken when determining how long to display each frame, as they won't be accurately consistent in their temporal spacing. Onion skinning would be a cool feature to. Please, one software suggestion per answer to allow the voting system to do it's job. Thanks in advance.

  Read the article

• Recovered video files won't play

  - by BioGeek

  I have an SD card with pictures and video which malfunctioned. I was able to recover the files with Photorec. The pictures are OK, but wen I try to open the vide files (*.mov extension) in get the following errors when I try to open them in the following programs Windows Media player: "Windows Media Player encountered a problem while playing the file" Quicktime: "Error -2048: Couldn't open the file because it is not a file that QuickTime understands" VLC: it shows the first frame of the video and the sound is just white noise The filesizes look correct so I presume the data is still in there. Is there any way to fix these recovered video files?

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• Where can I find a good, tab-less privacy filter for my monitor?

  - by KeyStroke

  Hi, I have an ASUS laptop with a 14" monitor (12" by 7" to be more specific), and I've been looking for a decent privacy filter that I can use with for, yet I couldn't find any. The problem with the filters I've found is that they all use those ugly "tabs" that you have to stick on the sides of your monitor in order to slip the filter in. I'm looking for ones that are like HP privacy filter, where parts of it goes under the frame of the monitor to hold it in place. Too bad HP doesn't sell filters that fit my screen. So, any idea where I can get a good privacy filter? Your help is so much appreciated

  Read the article

• Re-encoding a video file and increasing the size -- does this improve the quality?

  - by Josh

  If I have a video file at 320x240 resolution which I want to re-encode (because I don't like the encoding it's in now) and I also want to play it at double size (640x480), will I get higher quality if I scale it up to 640x480 when I convert it to a new format, verses keeping it at 320x240 in the new format and playing it at double size? This probably depends on the program used to convert, and if so, please let me know any program which might increase the quality. Here's my thinking. If I play a 320x240 file at double size, the system has to scale up each frame in real time, whereas if I scale up while recompressing the system may be able to use a more intensive algorythm like Bicubic interpolation . However I am not sure if this is true or not.

  Read the article

• Excel Countif external date

  - by Duall

  I am making an Excel 2010 spreadsheet to log support calls, services, and installations that each member would fill out. Due to being paid by job rather than by hour, there is a need for it to count each of these ("Call", "Service", "Install") there is in any given time span. The entry of the data itself would be in Sheet 1, and then a 'splash screen' of sorts would be in Sheet 2. Here I would like to be able to put a date range and it would display how many of each there is. I already can do the COUNTIF statement, =COUNTIF(Activity!$B:$B,"Call") but I don't know how to: a) Add in the prerequisite for a date so it only gets "Calls" within a certain time frame. b) Take the date it looks for from a cell on the splash screen.

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Fix elements within objects at their position? (Prevent movement when resizing)

  - by Skadier

  I would like to know if it is possible to fix elements at their absolute position within custom elements in InDesign CS5? I created a kind of speech bubble and I would like to place a stripline within this bubble to separate two content areas. Just a little scheme to show the desired layout as Pseudo-Markup :D <speech-bubble> <textbox>HEADER SECTION</textbox> <stripline> <textbox>Some other text</textbox> </speech-bubble> I created something like this but with two separate elements which aren't connected. So I have to select both of them in order to move the whole bubble. Then I tried to connect them using Object->Paths->Create linked path but then the stripline moves and the HEADER SECTION moves too. All in all I would like to have a speech bubble which can be resized in order to hold more text but it shouldn't make the HEADER_SECTION larger or move the stripline. Hope you understand what I mean :D Thanks in advance!

  Read the article

• C++ pimpl idiom wastes an instruction vs. C style?

  - by Rob

  (Yes, I know that one machine instruction usually doesn't matter. I'm asking this question because I want to understand the pimpl idiom, and use it in the best possible way; and because sometimes I do care about one machine instruction.) In the sample code below, there are two classes, Thing and OtherThing. Users would include "thing.hh". Thing uses the pimpl idiom to hide it's implementation. OtherThing uses a C style – non-member functions that return and take pointers. This style produces slightly better machine code. I'm wondering: is there a way to use C++ style – ie, make the functions into member functions – and yet still save the machine instruction. I like this style because it doesn't pollute the namespace outside the class. Note: I'm only looking at calling member functions (in this case, calc). I'm not looking at object allocation. Below are the files, commands, and the machine code, on my Mac. thing.hh: class ThingImpl; class Thing { ThingImpl *impl; public: Thing(); int calc(); }; class OtherThing; OtherThing *make_other(); int calc(OtherThing *); thing.cc: #include "thing.hh" struct ThingImpl { int x; }; Thing::Thing() { impl = new ThingImpl; impl->x = 5; } int Thing::calc() { return impl->x + 1; } struct OtherThing { int x; }; OtherThing *make_other() { OtherThing *t = new OtherThing; t->x = 5; } int calc(OtherThing *t) { return t->x + 1; } main.cc (just to test the code actually works...) #include "thing.hh" #include <cstdio> int main() { Thing *t = new Thing; printf("calc: %d\n", t->calc()); OtherThing *t2 = make_other(); printf("calc: %d\n", calc(t2)); } Makefile: all: main thing.o : thing.cc thing.hh g++ -fomit-frame-pointer -O2 -c thing.cc main.o : main.cc thing.hh g++ -fomit-frame-pointer -O2 -c main.cc main: main.o thing.o g++ -O2 -o $@ $^ clean: rm *.o rm main Run make and then look at the machine code. On the mac I use otool -tv thing.o | c++filt. On linux I think it's objdump -d thing.o. Here is the relevant output: Thing::calc(): 0000000000000000 movq (%rdi),%rax 0000000000000003 movl (%rax),%eax 0000000000000005 incl %eax 0000000000000007 ret calc(OtherThing*): 0000000000000010 movl (%rdi),%eax 0000000000000012 incl %eax 0000000000000014 ret Notice the extra instruction because of the pointer indirection. The first function looks up two fields (impl, then x), while the second only needs to get x. What can be done?

  Read the article

• Running game, leaving game and continuing animation

  - by Madrusec

  I have been trying to learn some Actionscript recently and have been trying to run an interactive story that at one point turns into an extremel simple shooter game. After the player either wins or looses, then he/she is taken to the rest of the animated story. So I have everything up to the point where the games runs (successfully) but for some reason I am unable to have flash run the rest of the frames, most of which have no code at all. This is the code for scene 1: stop (); import flash.display.MovieClip; import flash.events.MouseEvent; import flash.utils.Timer; import flash.events.TimerEvent; var stoneInGame:uint; var stoneMaker: Timer; var container_mc: MovieClip; var cursor:MovieClip; var score:int; var anxiety:int; var anxiety_mc :MovieClip = new mcAnxiety(); //stage.addChild( anxiety_mc ); function initializeGame():void { stoneInGame = 10; stoneMaker = new Timer(1000, stoneInGame); container_mc = new MovieClip(); addChild(container_mc); container_mc.addChild(anxiety_mc); anxiety_mc.x = 497; anxiety_mc.y = 360; stoneMaker.addEventListener(TimerEvent.TIMER, createStones); stoneMaker.start(); cursor = new Cursor(); addChild(cursor); cursor.enabled = false; Mouse.hide(); stage.addEventListener(MouseEvent.MOUSE_MOVE, dragCursor); score = 0; anxiety = anxiety_mc.totalFrames; anxiety_mc.gotoAndStop(anxiety); } function dragCursor(event:MouseEvent):void { cursor.x = this.mouseX; cursor.y = this.mouseY; } function createStones(event:TimerEvent):void { var stone:MovieClip; stone = new Stone(); stone.x = Math.random() * stage.stageWidth; stone.y = Math.random() * stage.stageHeight; container_mc.addChild(stone); } function increaseScore():void { score ++; if(score >= stoneInGame) { dragCursor.stop(); createStones.stop(); stoneMaker.stop(); trace("you wind!"); } } function decreaseAnxiety():void { anxiety--; if(anxiety <= 0) { stoneMaker.stop(); trace("you lose!"); } else { anxiety_mc.gotoAndStop(anxiety); } increaseScore(); } initializeGame(); So what I tried to do was adding gotoAndPlay() inside both the decreaseAnxiety and increaseScore functions after the trace statements and referenced a frame where I have more keyframes that continue a story. However, Flash just goes back to the beginning of the timeline and I even the functions that change and control the cursor seem to be running. This leads me to believe that I need to make sure that I tell flash o stup running certain functions before jumping to another frame. However, it seems to me that I would still have the same issue and not be able to continue in the timeline. Is there something I am missing? How can I jump out of all this code once the game finishes and simply continue playing the rest of the frames? Any pointers would be greatly appreciated. Thank you

  Read the article

• Migrate servers without losing any data / time-limited MySQL dump?

  - by inac

  Is there a way to migrate from an old dedicated server to a new one without losing any data in-between - and with no downtime? In the past, I've had to lose MySQL data between the time when the new server goes up (i.e., all files transferred, system up and ready), and when I take the old server down (data still transferred to old until new one takes over). There is also a short period where both are down for DNS, etc., to refresh. Is there a way for MySQL/root to easily transfer all data that was updated/inserted between a certain time frame?

  Read the article

• CSMA between APs in same channel & different SSID ?

  - by Ranganathan

  Would be great if someone clarifies this doubt. Lets assume two Wireless Access Points AP1 & AP2 with these conditions 1. both in the same 802.11 standard 2. same channel 3. using different SSIDs (just like in adjacent apartment houses). In this case, do these two Access points (and the clients associated to them) coordinate via CSMA/CA ? ie., if one of the AP's or a client station is about to transmit, does it wait & observe the other AP's & its clients' transmission before sending the frame in air ? Also, do the clients associated with these different APs coordinate via CSMA/CA ?

  Read the article

• If email not received then do X (outlook 2013 on Exchange 2010)

  - by Brad

  I receive notification emails daily and would like to automate an easier way to manage all of those notifications. For example: Notification 1 from [email protected] is received daily between 10pm-1am Notification 2 from [email protected] is received daily between 12am-3am Notification 3 from [email protected] is received daily between 1am-4am I am looking for a way to page myself at [email protected] on my cellphone if any of these messages are not received within the defined time frame of when the email should have arrived. I would like to basically email a page like: ATTENTION Notification 2 not received within the allowed range. This way I would be notified instead of having to check the email manually and see that I only received 2 of the three alerts. Is there a way to do this in Outlook? Our exchange server is a hosted exchange server on GoDaddy if that info is needed.

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >