Search Results

Search found 49320 results on 1973 pages for 'system architecture'.

Page 1354/1973 | < Previous Page | 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361  | Next Page >

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• What kind of time lapse image stitching software is out there?

  - by AaronLS

  I took a bunch of digital images(jpg format) of a sunrise that I want to make into a time lapse movie. The only recommendation I've seen was some iStopMotion for Mac, but I am running Windows. I would prefer the software to take into account the metadata in the image that indicates what time the image was taken when determining how long to display each frame, as they won't be accurately consistent in their temporal spacing. Onion skinning would be a cool feature to. Please, one software suggestion per answer to allow the voting system to do it's job. Thanks in advance.

  Read the article

• Restoring factory recovery partition (samsung)

  - by user974896

  I have upgraded the HDD in a Samsung laptop and would like to restore the "Press F4 for recovery" partition. My new disk has three partitions, System, Windows, and Recovery. I did a dd of the recovery partition from the old HDD to the new. I also set the diag flag on the new HDD. F4 recovery still is not working. tldr: I mapped my new disk like my old disk with the exception of exact sizes. I did the recover partition from old to new via livecd. F4 recovery does not work

  Read the article

• Do you think Microsoft is finally on the right track with its Windows 7?

  - by Saif Bechan

  It has been a while now since Windows 7 has been released. So far I didn't hear of many major complaints about it. I can remember the time that Windows Vista hist the shelves. There were major complaints from both experts and just regular users. I do a lot of OS installs for just regular users. These are mostly family and friends, and sometimes there are some customers. Up till now I mostly still use Windows XP SP3, because it is stable and most people are familiar with it. I did Vista for some users but they always call me back with all sorts of questions and in the end I had to downgrade them to XP. Do you think it is safe now to recommend Windows 7 as a good operating system? Offcourse their hardware has to support it, but let's say that is the case. If you install Windows 7 a lot for people, what are the complaints about if you get them?

  Read the article

• Seagate 1TB 'EXPANSION' external hard drive, showing as BAD

  - by Dave Plews

  Hello! I have bough an external Seagate 1TB drive, which my XP system can see and will write files to, however when I use Partition Magic it describes the whole partition as BAD, and it is shown in yellow. All the options are greyed out. When I use Drive Image XML to try and copy drive to drive (I want a comlplete copy of my C drive including OS), I get an error message saying it can't lock the drive. The external drive is brand new and uses NTFS. Any ideas? Seagate 'support' haven't bothered getting back to me. Incidentally, I have another external drive (320GB), which uses FAT32 and Partition Magic sees that fine. I am doing a full format of the Seagate at the moment, to see if this helps. Thanks in advance!

  Read the article

• Duplicating an instance into a new VPC from a Snapshot

  - by Remmus

  We have a group of instances in an Amazon VPC we use for our live environment. We have a big release to do and want to test that the deployment will run smoothly. I have created a second VPC, created instances of the same size on the same private ips and then removed their original volumes and attached new volumes that were created from snapshots of the live environment. Unfortunately none of the instance will allow me to connect. They start running fine, but I don't get any system logs appear and can't connect. The only thing I can think of is that the new instance was created from a new AMI as the old one is deprecated due to new security fixes. Is this a problem? If so can I fix it in any way? And if this isn't a problem, does anyone have any ideas how I can fix it?

  Read the article

• Hardware recommendations for building an Ubuntu encrypted file server

  - by Robert Mashlan

  I would like to build a file server for my home network using Ubuntu. It will serve files from RAID1 configured disks, either in the OS or in hardware. It will be connected to a Gigabit ethernet LAN. The disks will use an encrypted file system. It will serve samba shares. I would like a recommendation on what kind of processing power/memory I would need to build a box that would be able to sustain the full capacity of the Gigabit ethernet connection in a file transfer for a single connection with the overhead of serving from an encrypted disk. I'm not looking to build a dream server, I just want enough processing capacity for high performance (and reliable) file sharing and spend as little as possible for it. This may be tangential, but what kind of hardware would I need to have a server be able to reliably go into a low power mode when no requests are being made of it?

  Read the article

• Permission denied in Ubuntu

  - by gcc

  I have a file which includes new icons for my system. Anyway, How can I change my old icons down with new ones? The name of the new icon pack is "myFAV-TUX" and it's sitting on my desktop. The problem is, I can't copy them into the usr/share/icons/ folder. It says, permission denied. I also tried ls -l .... But i couldn't do it. How can I change the icon theme? Please help.

  Read the article

• Copy files off FreeBSD

  - by Josh

  I have a FreeBSD machine that I have to copy everything off the drive. The fielsystem is UFS and not readable by any other operating system. (great...) I have a USB flash drive (FAT32) I need to copy everything to from the SATA in the bsd machine. I looked up cp commands, and got it to partially work, but it seems to copy to the wrong directory. I cannot find out the "name" of the USB drive, and if it can even copy to it.

  Read the article

• How to stop Excel Treating US dates as UK dates?

  - by deworde

  I'm in the UK, I've got a problem where I've got a list of dates supplied in US format. Excel seems to treat the ones that are valid in both formats as UK dates, (e.g. 03/01/2012 becomes 3rd of January rather that 1st March), and treat the ones that aren't valid UK dates (e.g. 03/13/2012) as basic text. I assume this choice is something to do with my regional settings. What I want is the system to recognise that this column of text is supplied in US date format, and convert it into the underlying date representation for calculations. How do I do this?

  Read the article

• No Audio Output Device is installed

  - by mabho

  Hi, this is an intermitent problem in my Sony Vaio model PCG-5K1L. I keep on getting a "No Audio Output Device is installed" when hovering my loudspeaker icon in Windows Vista. I have tried System Device Manager Sound Realtek High Definition Album Update Driver Software. The update process went through, but nothing happens. Still Vista does not seem to recognize my audio software. The strange part is that out of nothing my sound card can resume working to stop again hours later... If someone has any clues to solve this, please, help. Thanks a lot.

  Read the article

• Windows Explorer - How can an large file have a zero "Size on disk" value? What does it mean

  - by Jaans

  I would expect some discrepancy between "Size" and "Size on disk" in Windows Explorer due to file system allocations etc. Below is a screenshot of an example file on a Windows 2012 R2 file server that has a 81.4 MB "Size" but for the "Size on disk" it's 0 bytes. What gives? I have other files doing the same, but yet another set of files and folders behaving as expected showing the size on disk relatively close to the actual file size. The volume is a basic disk, formatted with NTFS and the default 4K allocation units. No compression is set for any file or folder on the volume. (For those more paranoid, I did a malware scan, and also confirmed there is not ADS streams associated with the file in question). The user account running Windows Explorer is the domain administrator, and the file owner is also the domain administrator. Thanks for reading!

  Read the article

• VPS showing low disk space despite there is nothing major on it

  - by SheoNarayyan

  Hello experts, On my VPS server I was trying to see the used disk space and when I open My Computer it shows 17.9 GB free out of 39.8 GB it means that 21.9 GB space is used. However, when I select all files and folders from C: and try to see the total size, it just count approximately 11 GB. The difference is around 10 GB. Where is this 10 GB going if I have not stored anything else here? I asked above question from my VPS provider and he responded below Check hidden files/system files/etc. This is default windows OS and its utilization and not specific to setup. If you want specifics of usage, you can go ahead and get in touch with Microsoft support team and they'll provide you with exact specification of the same. I am sure that Windows OS must not be taking up 10 GB space for hidden files and folders. My VPS has Windows Server 2008 R2 installed. Can anyone help me in this on who is right?

  Read the article

• Let a program (called by other program) run as admin without prompt

  - by DarkGhostHunter

  As you may know, Steam doesn't like no-admin accounts for installing games or whatsoever. In my case, I have a user in my computer that usually install a lot of games and every time I have to put my password to successfully play them. Blame, /bin/SteamService.exe. I came up with a solution: using RunAs to make Steam run as the admin user. But that is a potential security risk. So instead of that, I'm asking if is possible to do the following: Hot to run SteamService.exe with high trust levels (or admin privileges) automatically when Steam calls it? That way he can play and install games in Steam leaving the rest of the system alone. I don't mind if the user has to click "yes or no", but without prompt its better because some games asks every time they're executed.

  Read the article

• Windows 7 formatting HD

  - by Rick

  I have an Acer Aspire 5610 that I am trying to put an Operating System back on. I am trying to install windows 7 32-bit and it will not go through the install. Not sure why. I am now trying to reformat the hard drive and start with a fresh formatted HD. No other partitions. The problem is that the install disk is not doing the format it is giving me an error. The error is 0x8007045d. I am at a loss. This is the first time running into this issue. Please Help.

  Read the article

• How can I open a port in OS X 10.6?

  - by Ian

  Mine is MacBook Air, so I cannot plug to the modem directly. And I do want to turn my firewall off. How can I specify to open a port, like port 56789 in Mac OS 10.6.8? I know in old Mac OS, there is a option for me to specify a custom port. But I cannot find it in OS X 10.6.8. In System Preferences / Security / Firewall, I only can allow an APPLICATION to access a new port. However, now I'm programming, using a new port. So, it seems not suitable for me. So, can I simply open a port instead of using an Application to open a port?

  Read the article

• Can't get iptables firewall working correctly

  - by Jay

  I'm setting up a new Centos 5.6 system and can't get my iptables firewall to work correctly. it won't let me use SSH through it. I'm new to Centos but not to Linux or iptables. I've been removing things until I have isolated the problem. I set up the firewall with a default ACCEPT rule for the INPUT chain. I can connect through to the server fine. If I change the command to only allow traffic from the interface connecting to my trusted network it stops working. Working: iptables -A INPUT -s 0/0 -d 0/0 -j ACCEPT Failing: iptables -A INPUT -i eth0 -s 0/0 -d 0/0 -j ACCEPT I've double checked the ip address I'm using corresponds to eth0 using ifconfig. Any ideas where I went wrong?

  Read the article

• Cannot find grldr in all devices

  - by blockhead

  I'm running wubi on XP machine. Started out originally with 8.04, and gradually upgraded to 10.04. Recently, I was creating linux bootable USB drive, and put it in my system to see if it would work. After booting the LiveOS, and rebooting my machine, I know get the error Cannot find grldr in all devices when booting Ubuntu. I don't know what grldr is, but I assume it is the GRUB Loader. Did booting the LiveOS screw with my MBR perhaps? How can I fix this, and if not, is it possible to reinstall wubi, without losing anything of what I have now?

  Read the article

• Why does my HDD produce a high-pitched noise when the CPU is in use?

  - by CyberOptic

  I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

  Read the article

• Can't see CMD.EXE on Windows 7

  - by Andrea

  I have a problem with Windows 7 and cmd.exe with these conditions: Logon as non admin user Launch cmd.exe I can see cmd.exe in task manager but it's invisible in the desktop and I don't know what to do, everything is fine and I can see cmd.exe if I do login with an admin account. I can see it in the "Process" tab but not in the "Application" tab, and if I launch five cmd.exe's, I see five processes, but from that tab I have no "Bring to front" or "Maximise" I can't find any WOW folder under C:\Windows, even with show hidden and system files enabled. I'm running Windows 7 32-bit running on a 64-bit Intel Core 2 Duo E7500

  Read the article

• Deciding to use VM or native install for new hardware

  - by Billy Moon

  I have a Ubuntu 10.10 installation running on hardware. I upgraded the hardware, and am planning to move the system over. Whilst reading the many various ways to do this, I came across tools for making a virtual machine out of a hardware installation. I think this might make managing my server easier in the future if I run it as a virtual machine. Also, I will be able to easily split responsibilities of my server, for example running MySQL on a separate virtual machine hosted on the same physical machine. Is it a good idea to install my production server as a virtual machine inside another thin server installation? What are the pros/cons and pitfalls?

  Read the article

• Terminal runs svn commands very slowly, how can I speed this up?

  - by Paul

  Spending all day in terminal is beginning to get frustrating. We're working with large CakePHP projects, including a ton of schema files and complex controllers. Whenever I go into a project, and enter svn up, or svn ci my system chokes. It takes a good 15-30 seconds before it returns what revision number I'm on. I'm running OSX 10.6 on a Macbook Pro. Any reasoning behind this? Anyway I could fix this speed issue?

  Read the article

• How to patch Solaris

  - by Gk.

  I have Solaris 10 and 11 running on my system. I want to update all of them to newest patch. I don't have license or support plan for Solaris yet (the OS is pre-installed on my server). On Solaris 11 I heard I need a support license and a cert to connect to Oracle software repository. What about Solaris 10? Can I fetch patch bundle and install it without connect to Oracle (for both Solaris 10 and 11)? TIA.

  Read the article

• linux or vmware

  - by bahar

  Hi I don't know if here is the right place to ask this question or not but its vital for me to solve it. I run open suse 10.2 on a vmware and my operating system is vista. yesterday I run my vmware and another program but both couldn't run and I end both tasks to solve it but now I can open vmware without any problem and run another os but not my open suse. the error is: Cannot open the disk 'C:\Users\hamide\Documents\Virtual Machines\SUSE Linux 2\SUSE Linux 2-000003.vmdk' or one of the snapshot disks it depends on. Reason: Failed to lock the file. please help me I don't have any recent back up and It takes too long to do all my project again.:( Bests

  Read the article

• Problems getting auditd set up on my server

  - by Tola Odejayi

  I'm trying to figure out which processes are deleting files from a specific directory, so I want to set up and run auditd on my system. I've set up the following rule in audit.rules: -w S unlink -S truncate -S ftruncate -a exit,always -k cache_deletion -w /home/myfolder/cache Then I type this to start the audit daemon: auditctl -R /etc/audit/audit.rules -e 1 But I get this error message: Error - nested rule files not supported Does anyone know what I am doing wrong here, and how I can resolve this? Also, what do I have to do to get the daemon running at startup?

  Read the article

< Previous Page | 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361  | Next Page >