Search Results

Search found 4479 results on 180 pages for 'chaz black'.

Page 136/180 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Hard drive spark, can it be recovered?

  - by user163558

  Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

  - by Bryce Thomas

  I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

  Read the article

• Unable to access network resources through VPN

  - by fbueckert

  I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• How can I get VirtualBox to run at 1366x768?

  - by Joe White

  I'm trying to run Windows 8 in VirtualBox. My laptop's display is exactly 1366x768. Windows 8 disables some of its features if the resolution is less than 1366x768, so I need to run the guest OS fullscreen. The problem is, VirtualBox refuses to run the guest at 1366x768. When VirtualBox is "fullscreen", the guest is only 1360x768 -- six pixels too narrow. So there's a three-pixel black bar at the left and right sides of the display. This user had the same problem, but the accepted answer is "install the Guest Additions", which I've already done; that got me to 1360, but not to 1366. According to the VirtualBox ticket tracker, there used to be a bug where the guest's screen width would be rounded down to the nearest multiple of 8, but they claim to have fixed the bug in version 3.2.12. I'm using version 4.1.18 and seeing the same problem they claim to have fixed, so either they broke it again, they were wrong about ever having fixed it, or my problem is something else entirely. This answer suggested giving the VM 128MB of video memory, and claimed no problems getting 1366x768 afterward. When I created the VM, its display memory was already defaulted to 128 MB. I tried increasing it to 256MB, but with no effect: the guest is still six pixels too narrow. My host OS is Windows 7 64-bit, and I'm running VirtualBox 4.1.18. How can I get VirtualBox to run my guest OS fullscreen at my display's native resolution of 1366x768?

  Read the article

• Timeout settings for Remote Desktop Sessions to lock

  - by atroon

  Our office uses a Windows 2003 server to provide access to an accounting application. Recently I was asked to increase the amount of time it takes for the session to lock itself and require the entry of the user's password to resume. That seems to be about ten minutes, at present. I am familiar with group policy and have tweaked those settings to scavenge sessions (and thereby licenses) from sessions that have been disconnected (by the user closing the mstsc.exe client or by a network issue). That's simple and straightforward. But I can't find anything in GP to allow a longer time period before the RDP client window goes black and then, when clicked upon, requires a username and password to resume the session. I must admit this would be nice personally as well, since most of my time is spent documenting the application and/or monitoring its database, so I usually have a window open to the terminal server along with the rest of the staff in the accounting center, but I interact with it very little. I usually enter my password 10-15 times per workday, but I'm pretty good at it by now. ;) So, can this timeout period be adjusted, or are we out of luck?

  Read the article

• My Computer hangs for a few minutes just after startup, and then is fine.

  - by EvilChookie

  So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

  Read the article

• FFmpeg overlay two videos, one input with transparency

  - by Gian B.

  I am trying to create a karaoke from a CD+G file (converted to AVI using FFmpeg) and add a video as a background of the lyrics. Here's a screenshot of a the output from CD+G conversion, for simplicity let's call this lyrics.avi http://imgur.com/wUwHUhV Now a have this video.mp4 file that I'd like to put behind this lyrics.avi Here's a sample of what I'm trying to achieve http://imgur.com/8GuWXtQ I'm sure most of you are familiar with karaoke. I haven't used FFmpeg much and I'm not really sure if what I want to achieve is possible with FFmpeg. Is it possible to overlay two videos, and add a transparency to one of the videos? In this case the colour black? How can I set the offset time of the lyrics.avi? Here's the command the I've tried so far: ffmpeg -i video.mp4 -i lyrics.avi -filter_complex "nullsrc=size=854x480 [base]; [0:v] setpts=PTS-STARTPTS, scale=854x480 [upperleft]; [1:v] setpts=PTS-STARTPTS, scale=854x200 [bottomleft]; [base][upperleft] overlay=shortest=1 [tmp1]; [tmp1][bottomleft] overlay=shortest=1:y=280" -c:v libx264 -y karaoke.mp4

  Read the article

• How does Windows 7 taskbar "color hot-tracking" feature calculate the colour to use?

  - by theyetiman

  This has intrigued me for quite some time. Does anyone know the algorithm Windows 7 Aero uses to determine the colour to use as the hot-tracking hover highlight on taskbar buttons for currently-running apps? It is definitely based on the icon of the app, but I can't see a specific pattern of where it's getting the colour value from. It doesn't seem to be any of the following: An average colour value from the entire icon, otherwise you would get brown all the time with multi-coloured icons like Chrome. The colour used the most in the image, otherwise you'd get yellow for the SQL Server Management Studio icon (6th from left). Also, the Chrome icon used red, green and yellow in equal measure. A colour located at certain pixel coordinates within the icon, because Chrome is red -indicating the top of the icon - and Notepad++ (2nd from right) is green - indicating the bottom of the icon. I asked this question on ux.stackoverflow.com and it got closed as off-topic, but someone answered with the following: As described by Raymond Chen in this MSDN blog article: Some people ask how it's done. It's really nothing special. The code just looks for the predominant color in the icon. (And, since visual designers are sticklers for this sort of thing, black, white, and shades of gray are not considered "colors" for the purpose of this calculation.) However I wasn't really satisfied with that answer because it doesn't explain how the "predominant" colour is calculated. Surely on the SQL Management Studio icon, the predominant colour, to my eyes at least, is yellow. Yet the highlight is green. I want to know, specifically, what the algorithm is.

  Read the article

• My client's solution of a Windows SBS 2011 VM on an Ubuntu host and VirtualBox is pinning the host CPU

  - by Scott Stamp

  Here's my situation, I've got a client hosting two servers (one VM), with the host providing VMware Zimbra, the other Windows Small Business Server 2011. Unfortunately, the person before me had configured this setup as follows. Host: Ubuntu Desktop Edition 10.04 (I know, again, not my choice) running VMware Zimbra 8GB of RAM On-board RAID1 of two 320GB Seagate Barracuda drives for the OS Software RAID5 of four 500GB WD Caviar Black drives on MDADM for bulk storage (sorry, I don't know the model #) A relatively competent quad-core Intel Core i7 CPU from the Nehalem architecture (not suspicious of this as the bottleneck) Guest: Windows Small Business Server 2011 4GB of RAM Host-equivalent CPU allocation VDI file for OS hosted on the on-board RAID, VDI file for storage hosted on the on-board RAID For some reason when running, the VM locks up when sitting nearly idle, and the VirtualBox process reports values of 240%+ in top (how is that even possible?!). Anyone have any ideas or suggestions? I'm totally stumped on this one. Happy to provide whatever logs you'd like to take a look at. Ideally I'd drop VirtualBox and provision this with VMware Workstation, but the client has objected to the (very nominal) costs involved. If hardware needs to be purchased to help, it will be, but we're considering upgrades a last-resort at this time. Thanks in advance! *fingers crossed*

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Blending Background for Polar Distortion in GIMP

  - by Chris S

  I followed a tutorial to perform a polar distortion on a panoramic image. The instructions are geared for Photoshop but seem to mostly apply to GIMP as well. The only thing I couldn't really figure out was how they were able to automatically fill in the area around the circle by "extending" the border of the circle. e.g. In GIMP, performing the polar distortion leaves a black white canvas around the circle, not the attractive blended background shown in the tutorial. Is there an easy way to implement this? The only way I found was to reserve half of the "square" as blank canvas and then manually copy the image's top row of pixels over this empty portion. Then, after the polar distortion, I crop out the extra area. Although this achieves the effect, it seems a bit awkward. How do you stretch selections? Ideally, I just want to select the top row and stretch it vertically until it fills in half of the canvas. Instead I had to manaully copy, paste, translate, etc.

  Read the article

• How do I make wallpaper fit both monitors in dual monitor setup?

  - by Ben

  I am deploying some custom corporate wallpaper as part of a Windows 7 rollout. Some people will be using dual monitors, and the additional monitors may be either 4:3 or widescreen. I want to use the same wallpaper on both screens (i.e. 2 copies of the same wallpaper, not stretched across both.) If I set the background to "stretch", it uses the aspect ratio of the primary monitor to stretch the wallpaper on both monitors. So, for example, if I have a dual monitor setup using a 4:3 TFT as primary and my (widescreen) laptop LCD as secondary - the image shows on the laptop LCD in 4:3, with a black stripe down either side. I've only noticed this as an issue with my "custom" wallpaper. Both the default MS wallpaper and the built in Lenovo wallpaper don't seem to have this issue. Is this by using "trickery" such as using an image larger than the largest resolution you will have and centering it? (i.e. so you crop out part of the image.) Or can this be done "properly"? I don't want to use 3rd party software to do this, but would happily do a bit of Powershell scripting if this would solve the issue. Thanks in advance, Ben

  Read the article

• Have it fixed or buy a new one?

  - by Workshop Alex

  My dual-monitor system has just become a single-monitor system again when the older monitor decided it would be nice to just turn to black. It's a Samsung LCD monitor and is over three years old. Not sure if the warranty is still valid but I just wonder what option would me more efficient: 1) Have the monitor fixed for a small amount. 2) Buy a new monitor for a slightly bigger amount. When monitors were still expensive, I wouldn't doubt about this and would just have my monitor repaired. But prices are so low nowadays, (and repairs are expensive) that I wonder if it's worth the trouble... Of course, I'm in no hurry since I still have another monitor. It's just that I liked the dual-monitor setup. Solved! Just ordered a new monitor. A Samsumg Syncmaster T260HD 25,5". Much more than it would cost me if I just had my old one repaired but I noticed that this one has a build-in TV tuner, plus speakers. It's way more expensive than a repair, but it's worth the additional value it provides.

  Read the article

• Server freezes while installing Redhat Enterprise Linux Server 6

  - by eisaacson

  We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• How do I fix a super slow MacBook?

  - by MakingScienceFictionFact

  I'm running a black MacBook 4.1. Intel Core 2 Duo @ 2.4 GHz, 2 GB RAM, 250 GB hard disk drive, bus speed is 800 MHz. It's about three years old in excellent shape externally. I treat this thing like a baby. It used to run awesome, but now it's super slow at everything. I get the spinning pizza of death constantly. It takes a long time to boot up or load any program, even Safari and iTunes. iPhoto is terribly slow. The Internet doesn't work properly and it reminds me of a buggy PC. I've formatted it and re-installed Mac OS X 10.6 (with all updates), and I've done the disk repairs process. As an iOS developer this is driving me crazy, but luckily I have an iMac to work on in the day which is fast. I'm ready to format it again, but that didn't work last time. After the last format, I copied back files from an external drive so maybe the offending files were hidden in there somewhere. Here are the hard disk drive and RAM specifications. It is upgrade-able to 4 GB of RAM. Hard disk drive: The Fujitsu Mobile MHY2250BH is a 250 GB, standard hard disk drive. Its burst transfer rate is 150 Mbyte/s. This is a 5400 RPM drive and comes with an 8 MB buffer. RAM: two sticks of 1 GB DDR2 SDRAM, speed: 667 MHz.

  Read the article

• Colorizing your terminal and shell environment?

  - by Stefan Lasiewski

  I spend most of my time working in Unix environments and using Terminal emulators. I try to use color on the commandline, because color makes the output more useful and intuitive. What are some good ways to add color to my terminal environment? What tricks do you do? What pitfals have you encountered? Unfortunately, support for color is wildly variable depending on terminal type, OS, TERM setting, utility, buggy implementations, etc. Here's what I do currently, after alot of experimentation: I tend to set 'TERM=xterm-color', which is supported on most hosts (but not all). I work on a number of different hosts, different OS versions, etc. I'm trying to keep things simple and generic, if possible. Many OSs set things like 'dircolors' and by default, and I don't want to modify this everywhere. So I try to stick with the defaults. Instead tweak my Terminal's color configuration. Use color for some unix commands (ls, grep, less, vim) and the Bash prompt. These commands seem to the standard "ANSI escape sequences" I've managed to find some settings which are widely supported, and which don't print gobbledygook characters in older environments (even FreeBSD4!) (For the most part). From my .bash_profile ### Color support # The Terminal application typically does 'export TERM=term=color' # Some terminal types will print Black, White & underlined with these settings. OS=`uname -s` case "$OS" in "SunOS" ) # Solaris9 ls doesn't allow color, so use special characters instead. LS_OPTS='-F' ;; "Linux" ) # GNU tools supports colors! See dircolors to customize colors export LS_OPTS='--color=auto' # Color support using 'less -R' alias less='less --RAW-CONTROL-CHARS' alias ls='ls ${LS_OPTS} export GREP_OPTIONS="--color=auto" ;; "Darwin"|"FreeBSD") # Most FreeBSD & Apple Darwin supports colors # LS_OPTS="-G" export CLICOLOR=true alias less='less --RAW-CONTROL-CHARS' export GREP_OPTIONS="--color=auto" ;; esac

  Read the article

• Monitor is flashing through camera but not in the naked eye

  - by odyodyodys

  Two monitors: Samsung T23C350 - Samsung 2243NW Lets call the first A and the other B. A is a LED monitor with a 2ms response time (in specs) with a native resolution of 1920*1080@60Hz B is an older not-led one with 5ms response in specs with a resolution of 1680*1050@60Hz In the attached images and video you'll see that A (on the LEFT) is flickering but this is not visible to the naked eye. I took some pictures and videos with a camera and a mobile phone. This is also happening to all digital camcorders I've tested. A has a setting response time with values normal, fast, fastest. No matter the setting, the effect is the same. A on the left and B on the right. You can see the flickering, although both are @60Hz A video where you can see both monitors. A is always the left monitor. Another video where you can see what my digital camera sees. Another thing is that I managed to get a picture where the left monitor is completely black whilst the right one is displaying fine. This proves that the monitor is continuously flashing. My question is: Is this normal behavior and what is causing it? Am I affected by this fast flickering? I am using this as my primary monitor and as a programmer I have to keep my eyes on it for hours.

  Read the article

• GA 8KNXP Rev1.0: 4GB installed, only 3.5 recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4GB. The specs from the manual say: Maximum memory support: 4GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

  - by Jacob

  How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

  Read the article

• LG LW20 Express won't boot after hdd replace

  - by Mika

  My old laptop (LG LW20 Express) got a hdd failure and I replaced the hdd. Now the laptop won't boot from cd or usb. I'm trying to install ubuntu on it. When I turn the laptop on it shows me the startup screen but when it should be the time to load operating system it just gives a black screen and starts over. This loop continues until I shut down the laptop. I created the usb boot drive following this guide https://help.ubuntu.com/community/Installation/FromUSBStick/ I used my boot cd to install ubuntu on this machine I'm using right now. So at least the cd should work. From the BIOS I can see that my newly installed hdd is recognized and put as a secondary master. Also the cd and removable media are in the boot list before hdd. The laptop runs pretty hot. The fan is at full speed pretty soon after the laptop is turned on. Earlier I suspected that it would have been the almost broken hdd that would have produced that heat but there obviously is something else also. Any ideas what to check?

  Read the article

• vim coloring for git

  - by kelloti

  I'm on Windows and my vim loads with a terrible colorscheme with vim. The message is blue on black (so I can't see what I'm typing). I need to change the colorscheme, but :colorscheme slate doesn't do anything. :version vim - vi improved 7.3 (2010 aug 15, compiled oct 27 2010 17:51:38) ms-windows 32-bit console version included patches: 1-46 compiled by bram@kibaale big version without gui. features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +multi_byte +multi_lang -mzscheme -netbeans_intg -osfiletype +path_extra -perl +persistent_undo -postscript +printer -profile -python -python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl -tgetent -termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save -xpm_w32 system vimrc file: "$vim\vimrc" user vimrc file: "$home\_vimrc" 2nd user vimrc file: "$vim\_vimrc" user exrc file: "$home\_exrc" 2nd user exrc file: "$vim\_exrc" compilation: cl -c /w3 /nologo -i. -iproto -dhave_pathdef -dwin32 -dfeat_cscope -dwinver=0x0400 -d_win32_winnt=0x0400 /fo.\objc/ /ox /gl -dndebug /zl /mt -ddynamic_iconv -ddynamic_gettext -dfeat_big /fd.\objc/ /zi linking: link /release /nologo /subsystem:console /ltcg:status oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib libcmt.lib user32.lib /pdb:vim.pdb -debug My $HOME\_vimrc looks like colorscheme slate syn on set shiftwidth=2 set tabstop=2 and my $VIM\vimrc is the stock vimrc that comes with the Windows Vim distribution. How do I change my console Vim colorscheme? Especially for Git commits.

  Read the article

• Win2008: Boot from mirrored dynamic disk fails!

  - by Daniel Marschall

  Hello. I am using Windows Server 2008 R2 Datacenter and I got two 1.5TB S-ATA2 hard disks installed and I want to make a soft raid. (I do know the disadvantages of softraid vs. hardraid) I have following partitions on Disk 0: (1) Microsoft Reserved 100 MB (dynamic), created during setup (2) System Partition 100 GB (dynamic) (3) Data partition, 1.2TB (dynamic) I already mirrored these contents to Disk 1. Its contents are: (1) System partition mirror, 100 GB (dynamic) (2) Data partition, 1.2 TB mirror (dynamic) (3) Unusued 100 MB (dynamic) -- is from "MSR" of Disk 0, created during setup. Since data and system partition are mirrored, I expect that my system works if disk 0 would fail. But it doesn't. If I force booting on disk 0: Works (I get the 2 bootloader screen) If I force booting on disk 1 (F8 for BBS), nothing happens. I got a blank black screen with the blinking caret. I already made disk1/partition1 active with diskpart, but it still does not boot from this drive. Please help. Both partitions are in "MBR" partition style. They look equal, except the missing "MSR" partition at the partition beginning (which seems to be not relevant to booting). Regards Daniel Marschall

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >