Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 138/337 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Route an IP from WAN to a host on LAN on OpenWRT

  - by Zsub

  EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

  Read the article

• xen domUs crashes or unavailability

  - by Rush

  I've xen server with 8 domU. Server is Xeon E31270 with 16gb ram. I think it is enough for 8 machines. Sometimes domU's crashes and i can't figure out the reason. After crash i can connect to console and there is somthing like this: Oct 8 22:20:49 server kernel: [30892.320780] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.320790] Node 0 DMA: 10*4kB 3*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8080kB Oct 8 22:20:49 server kernel: [30892.320817] Node 0 DMA32: 648*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5760kB Oct 8 22:20:49 server kernel: [30892.320842] 1491 total pagecache pages Oct 8 22:20:49 server kernel: [30892.320847] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.320852] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.320858] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.320862] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.324024] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.324024] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.324024] 424467 pages shared Oct 8 22:20:49 server kernel: [30892.324024] 503538 pages non-shared Oct 8 22:20:49 server kernel: [30892.330308] apache2 invoked oom-killer: gfp_mask=0x200da, order=0, oom_adj=0 Oct 8 22:20:49 server kernel: [30892.330322] apache2 cpuset=/ mems_allowed=0 Oct 8 22:20:49 server kernel: [30892.330330] Pid: 23938, comm: apache2 Not tainted 2.6.32-5-xen-amd64 #1 Oct 8 22:20:49 server kernel: [30892.330337] Call Trace: Oct 8 22:20:49 server kernel: [30892.330349] [<ffffffff810b7180>] ? oom_kill_process+0x7f/0x23f Oct 8 22:20:49 server kernel: [30892.330358] [<ffffffff810b76a4>] ? __out_of_memory+0x12a/0x141 Oct 8 22:20:49 server kernel: [30892.330367] [<ffffffff810b77fb>] ? out_of_memory+0x140/0x172 Oct 8 22:20:49 server kernel: [30892.330376] [<ffffffff810bb59c>] ? __alloc_pages_nodemask+0x4e5/0x5f5 Oct 8 22:20:49 server kernel: [30892.330385] [<ffffffff810cc224>] ? do_wp_page+0x386/0x707 Oct 8 22:20:49 server kernel: [30892.330395] [<ffffffff8100c3a5>] ? __raw_callee_save_xen_pud_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330404] [<ffffffff8100c369>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330412] [<ffffffff810cdfc7>] ? handle_mm_fault+0x7aa/0x80f Oct 8 22:20:49 server kernel: [30892.330422] [<ffffffff8130f906>] ? do_page_fault+0x2e0/0x2fc Oct 8 22:20:49 server kernel: [30892.330433] [<ffffffff8130d7a5>] ? page_fault+0x25/0x30 Oct 8 22:20:49 server kernel: [30892.330439] Mem-Info: Oct 8 22:20:49 server kernel: [30892.330443] Node 0 DMA per-cpu: Oct 8 22:20:49 server kernel: [30892.330450] CPU 0: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330463] CPU 1: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330466] Node 0 DMA32 per-cpu: Oct 8 22:20:49 server kernel: [30892.330469] CPU 0: hi: 186, btch: 31 usd: 0 Oct 8 22:20:49 server kernel: [30892.330472] CPU 1: hi: 186, btch: 31 usd: 60 Oct 8 22:20:49 server kernel: [30892.330476] active_anon:342076 inactive_anon:115398 isolated_anon:0 Oct 8 22:20:49 server kernel: [30892.330477] active_file:268 inactive_file:481 isolated_file:0 Oct 8 22:20:49 server kernel: [30892.330477] unevictable:1125 dirty:2 writeback:13 unstable:0 Oct 8 22:20:49 server kernel: [30892.330478] free:3410 slab_reclaimable:1718 slab_unreclaimable:6946 Oct 8 22:20:49 server kernel: [30892.330478] mapped:899 shmem:113 pagetables:35697 bounce:0 Oct 8 22:20:49 server kernel: [30892.330502] Node 0 DMA free:8036kB min:32kB low:40kB high:48kB active_anon:1144kB inactive_anon:1268kB active_file:8kB inactive_file:8kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:11792kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:224kB kernel_stack:16kB pagetables:1228kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330518] lowmem_reserve[]: 0 2004 2004 2004 Oct 8 22:20:49 server kernel: [30892.330523] Node 0 DMA32 free:5604kB min:5708kB low:7132kB high:8560kB active_anon:1367160kB inactive_anon:460324kB active_file:1064kB inactive_file:1916kB unevictable:4500kB isolated(anon):0kB isolated(file):0kB present:2052320kB mlocked:4500kB dirty:8kB writeback:52kB mapped:3600kB shmem:452kB slab_reclaimable:6872kB slab_unreclaimable:27560kB kernel_stack:3528kB pagetables:141560kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:992 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330539] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.330544] Node 0 DMA: 1*4kB 2*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8036kB Oct 8 22:20:49 server kernel: [30892.330579] Node 0 DMA32: 609*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5604kB Oct 8 22:20:49 server kernel: [30892.330605] 1522 total pagecache pages Oct 8 22:20:49 server kernel: [30892.330610] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.330615] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.330621] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.330625] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.333018] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.333018] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.333018] 424367 pages shared Oct 8 22:20:49 server kernel: [30892.333018] 503658 pages non-shared Seems like there isn't enough memory for this domU. But there is no any memory problems reported in munin monitoring: As you see system uses around 0.2G and 1G is available. So my question is: Is it xen specific problem, that real memory usage and memory usage that shows munin are different (I've never seen such problems oh real hardware machines)? Or maybe it is just monitoring problem, that can't catch moment when there is unusual high load and domU go down? And how I can to defeat this problem? it is really annoying to catch messages in e-mail that domU went down. Btw, such situation was when domU had 2G memory.

  Read the article

• How to make VirtualBox headless answer on rdp port?

  - by stiv

  I'd like to run windows xp on RDP: $ VBoxManage modifyvm winxp32 --vrdeport 3389 $ VBoxHeadless -s winxp32 -v on Oracle VM VirtualBox Headless Interface 4.1.18_Debian (C) 2008-2012 Oracle Corporation All rights reserved. (waiting) in another window: $ telnet localhost 3389 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused Yes, I've read about extension: $ sudo VBoxManage extpack install Oracle_VM_VirtualBox_Extension_Pack-4.1.20-80170.vbox-extpack 0%... Progress state: NS_ERROR_FAILURE VBoxManage: error: Failed to install "Oracle_VM_VirtualBox_Extension_Pack-4.1.20- 80170.vbox-extpack": Extension pack 'Oracle VM VirtualBox Extension Pack' is already installed. In case of a reinstallation, please uninstall it first Looked through all manuals and all help requests. No success. What's wrong? Any ideas?

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• How do I stop CRM from asking for admin credentials when printing report

  - by Ac0ua

  Problem: When printing a report in CRM, I am asked by the UAC for admin credentials. There is a long URL: https://(crm_hostname)/reserved.ReportViewerWebcontrol.axd?ReportSession=(ID)ControlID=(ID)Culture=1333&UICulture=1033&ReportStack=1&OpType=PrintCab Info: There are three users that have the issue laied out here. They are not admins of any kind. It looks like it is asking for permission to allow SQL Server Reporting Services 2008 to run. When I put my credentials in, it just brings up the Print dialog box (this is fine, just stop asking for credentials). I know this might sound silly but I downloaded and installed "SQL Server Reporting Services 2008" hopping my credentials would give permission right from the beginning. Giving the users local admin, I was told is not an option. Note: I did post this on community (dot) dynamics (dot) com but, they are not a very active website. Thanks for any help even if it just points me in the right direction!

  Read the article

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• AWS: Should my EC2 and RDS instances be in the same Availability Zone?

  - by DOOManiac

  I just noticed that all of our EC2 instances are in zone us-west-2b, but our Multi-AZ RDS instance is in us-west-2a. Performance-wise everything seems to be okay, and it will be a hassle to "move" the instances to one place since you have to stop and re-create them all. However if either of the two zones goes down when we will have some downtime; if everything is in one zone then at least we have a higher chance of not being in the zone that has downtime... Is this something worth fixing, or am I over-thinking it? (I was about to purchase some EC2 Reserved Instances, which are tied to specific AZs, so I wanted to make sure before going through with it) Thanks!

  Read the article

• VoIP on Netgear DGN 2000 and Lynksys PAP2

  - by David Brown

  I have a VoIP service running perfectly for outgoing calls but I cannot receive incoming calls. I have a Netgear DGN 2000 modem router on 192.168.0.1 and a Lynksys Phone Adapter PAP2 on 192.168.0.2. I have created 3 new custom services: Service Table Service Name Ports tlenfon(TCP) 5060 tlenfon2(UDP) 15000 tlenfon3(UDP) 35000 I have reserved the address 192.168.0.2 for the PAP 2 I have forwarded the ports for each service to the PAP2 Service Name Action LAN Server IP address WAN Users Log tlenfon ALLOW always 192.168.0.2 Any Always tlenfon2 ALLOW always 192.168.0.2 Any Always tlenfon3 ALLOW always 192.168.0.2 Any Always I have checked the Default DMZ and specified 192.168.0.2 What have I missed?

  Read the article

• Understanding ESXi and Memory Usage

  - by John

  Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

  Read the article

• What about IPv4 class E?

  - by Luc

  IPv4's class E network (240.0.0.0/4) contains 268 million addresses. Despite the advertisements for IPv6, claiming we have ran out of address space, this block ironically still claims to be "Reserved for future use". Why hasn't this block been freed up yet? Of course, IPv6 should be promoted instead of freeing up more IPv4 addresses, but we've seen the address shortage coming for years. There has even been a time they weren't sure there was enough time to develop IPv6 before we would run out of addresses. Why didn't they free up this block already? And is there any chance these addresses will be used in the future, like when IPv6 is fairly widely implemented but we still need IPv4 for backwards compatibility? It will be phased out regardless, but then ISPs don't have to employ NAT for IPv4 compatibility.

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• Is ext4 more expensive than ntfs?

  - by ???

  I have just converted an NTFS partition to ext4, however the total space seems reduced from 421G to 415G. Where did the 6G go? And, the reserved space is grown to 199M in ext4, much larger compared to 78M in NTFS, why? The partition is mainly used for movies/musics, so most files are very large (10M each). I want to use ext4 file system, is there any suggestion? mkfs.ntfs: /dev/sdb4 421G 78M 421G 1% /mnt/mmedia mkfs.ext4: /dev/sdb4 415G 199M 393G 1% /mnt/mmedia It's also weired that the remaining size of ext4 is 393G, shouldn't it be 415G or 414G? What happened to the disappeared 22G? Compared to NTFS, ext4 seems eaten 28G in total.

  Read the article

• RAID 1 Mirror Error with Two Western Digital 500GB Drives

  - by bm678

  I have Windows 7 Ultimate 64 bit installed on a Western Digital 500GB drive (WD5000BEVT-22ZAT0) that was partitioned automatically by Windows as 100MB System Reserved and 465.66GB drive C. There is also an unallocated second Western Digital 500GB drive (WD5000BPVT-22HXZT1) that I want to use for RAID 1 to mirror the first drive but I get an error message stating “ALL DISKS HOLDING EXTENTS FOR A GIVEN VOLUME MUST HAVE THE SAME SECTOR SIZE, AND THE SECTOR SIZE MUST BE VALID.” I uninstalled Windows patch KB-982018 but I still get the same error message. Could you please let me know how to resolve this? Thanks.

  Read the article

• L2TP Site to Site VPN issues

  - by Chris Lively

  I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

  Read the article

• How do I run multiple commands on one line in Powershell?

  - by David

  In cmd prompt, you can run two commands on one line like so: ipconfig /release & ipconfig /renew When I run this command in PowerShell, I get: Ampersand not allowed. The & operator is reserved for future use Does PowerShell have an operator that allows me to quickly produce the equivalent of & in cmd prompt? Any method of running two commands in one line will do. I know that I can make a script, but I'm looking for something a little more off the cuff.

  Read the article

• SQL Server 2005 64bit on 16GB machine uses 3.6GB memory only

  - by ArjanP

  Maximum server memory is set to the maxvalue AWE is disabled (should not be needed in 64 bit anyway) Windows Server 2008 Enterprise SP2 It is a virtual server using VMWare If I look in Task Manager the sqlservr.exe process only uses about 3.6 GB of memory. Is that number not real? Shouldn't it attempt to use all available memory? If I run DBCC MEMORYSTATUS I get: VM Reserved 16670136 VM Committed 3640664 It looks like a memory limit I shouldn't be seeing in a 64 bit environment.. how can I get SQL2005 to use more memory?

  Read the article

• /dev/shm (shared memory) on linux

  - by Kirzilla

  Hello, Let's imagine that we have 8Gb of RAM on server. I'm mounting /dev/shm with 4Gb on board. mount -o remount,size=4G /dev/shm Will this memory be strictly reserved for shared memory or if /dev/shm is empty this memory could be used by regular applications (web server, php etc.)? PS:Sorry for my English. I'm asking it because I've just checked df -h and found tmpfs 6.0G 0 6.0G 0% /dev/shm on 8Gb RAM sever. I don't know who made this setup, but it seems to me awful. Thank you!

  Read the article

• How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

  - by Shakehar

  I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• VirtualBox VRDP server doesn't start on Windows

  - by quanticle

  I've installed VirtualBox 4.1.8 on a Windows 7 Ultimate host system. I've set up an Arch Linux VM that starts just fine from the VirtualBox GUI. However, when I try to start it with VBoxHeadless --startvm <vm_name> it prints the following Oracle VM VirtualBox Headless Interface 4.1.6 (C) 2008-2011 Oracle Corporation All rights reserved. and then it just sits there. I never get the VRDE server is listening on port 3389 message like when I start a headless VM on a Linux machine. Do I have to configure anything else in order to get the VRDE server to run?

  Read the article

• Amazon - install a complete server on EBS

  - by user1169575

  is it possible to install a full working OS with a webserver, db, and all needed stuff on an EBS storage? If so, would I immediatly gain benefits by mounting this EBS on a better instance? Otherwise (if I cannot install a complete image, or if you don't think it's reasonable) can I install the software so that I only need to mount the EBS on a new instance to have it working? I purchased a Medium Reserved Instance, but when there will be the need to get a better instance I'd like to move the whole db/website, I'd simply buy a better instance and then attach the EBS. Is it possibile? I'm imaging about it like an hard drive that would be mounted on a better server. Of course, more RAM would allow me to increase caching limits, and that's ok, but I don't want to reinstall anything (the main website is a magentocommerce and it's pretty painful to move it). P.S. is the Standard EBS (100 IOPS) valid or do I need to choose a Provisioned IOPS (up to 1000 IOPS)?

  Read the article

• Uploading my ITunes music that I saved on a flash drive to ITunes on my new computer then downloading it to my Ipod Touch

  - by Joshua Kricker

  I had an old computer with Windows XP. I transferred all my music, at least I hoped I had to a flash drive. Also, my computer kept giving me error messages that it could no longer sync to my Ipod Touch First Generation. I reformatted my Ipod back to original factory specs on the old computer. I have a new computer with Windows 7. I can't transfer my music from my flash drive to the ITunes Library. I also can't transfer it to my Ipod. I keep getting the message "Songs cannot be added to the Ipod because all of its space has been reserved for data." There's nothing in the Ipod memory. It's clear. What can I do? I want my music back.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >