Search Results

Search found 3953 results on 159 pages for 'byte slave'.

Page 139/159 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

  • Python line file iteration and strange characters

    - by muckabout
    I have a huge gzipped text file which I need to read, line by line. I go with the following: for i, line in enumerate(codecs.getreader('utf-8')(gzip.open('file.gz'))): print i, line At some point late in the file, the python output diverges from the file. This is because lines are getting broken due to weird special characters that python thinks are newlines. When I open the file in 'vim', they are correct, but the suspect characters are formatted weirdly. Is there something I can do to fix this? I've tried other codecs including utf-16, latin-1. I've also tried with no codec. I looked at the file using 'od'. Sure enough, there are \n characters where they shouldn't be. But, the "wrong" ones are prepended by a weird character. I think there's some encoding here with some characters being 2-bytes, but the trailing byte being a \n if not viewed properly. If I replace: gzip.open('file.gz') With: os.popen('zcat file.gz') It works fine (and actually, quite faster). But, I'd like to know where I'm going wrong.

    Read the article

  • Add two 32-bit integers in Assembler for use in VB6

    - by Emtucifor
    I would like to come up with the byte code in assembler (assembly?) for Windows machines to add two 32-bit longs and throw away the carry bit. I realize the "Windows machines" part is a little vague, but I'm assuming that the bytes for ADD are pretty much the same in all modern Intel instruction sets. I'm just trying to abuse VB a little and make some things faster. So... if the string "8A4C240833C0F6C1E075068B442404D3E0C20800" is the assembly code for SHL that can be "injected" into a VB6 program for a fast SHL operation expecting two Long parameters (we're ignoring here that 32-bit longs in VB6 are signed, just pretend they are unsigned), what is the hex string of bytes representing assembler instructions that will do the same thing to return the sum? The hex code above for SHL is, according to the author: mov eax, [esp+4] mov cl, [esp+8] shl eax, cl ret 8 I spit those bytes into a file and tried unassembling them in a windows command prompt using the old debug utility, but I figured out it's not working with the newer instruction set because it didn't like EAX when I tried assembling something but it was happy with AX. I know from comments in the source code that SHL EAX, CL is D3E0, but I don't have any reference to know what the bytes are for instruction ADD EAX, CL or I'd try it. I tried flat assembler and am not getting anything I can figure out how to use. I used it to assemble the original SHL code and got a very different result, not the same bytes. Help?

    Read the article

  • How do the size standard libraries compare for different languages

    - by Roman A. Taycher
    Someone was recently raving about how great jQuery was and how it made javascript into a pleasure and also how the whole source code was so small(and one file). I looked it up on www.ohloh.net/ and it said it was about 30,000 lines of javascript, when I tired curl piped to wc it said about 5000 lines(strange discrepancy that, maybe test suites, ect?). I thought well it isn't that strange since javascript from what I've heard has a lot of fun dynamic tricks, so you can probably get away with a small library. But then I thought what about other high level languages, the ones with large standard libraries and wondered how big the standard are for python/ruby/haskell/pharo(smalltalk)/*ml/ect. (libraries not vm stuff to the degree its possible to separate it) Anybody know? Any details (comment/blank/code lines , test code lines, lines in language vs lines in ffi/byte-code) are appreciated! edit: ps. since it started this me asking about jQuery as a bonus if you could please list the size of mega frameworks, a megaframewok provides so much that people using an x megaframework in language y might sometimes refer to programming in xy or even x rather then in y (ie. : qt, jQuery, etc.).

    Read the article

  • Read from one large file and write to many (tens, hundreds, or thousands) files in Java?

    - by Rudiger
    I have a large-ish file (4-5 GB compressed) of small messages that I wish to parse into approximately 6,000 files by message type. Messages are small; anywhere from 5 to 50 bytes depending on the type. Each message starts with a fixed-size type field (a 6-byte key). If I read a message of type '000001', I want to write append its payload to 000001.dat, etc. The input file contains a mixture of messages; I want N homogeneous output files, where each output file contains only the messages of a given type. What's an efficient a fast way of writing these messages to so many individual files? I'd like to use as much memory and processing power to get it done as fast as possible. I can write compressed or uncompressed files to the disk. I'm thinking of using a hashmap with a message type key and an outputstream value, but I'm sure there's a better way to do it. Thanks!

    Read the article

  • x86 .net application with system.OutOfMemoryException

    - by Allen
    Hi,Guys I got OutOfMemoryException after the app running for 1 day, the app totally use 1.5G memory , all consumed by managed heap, gen 2 used 200mb , and LOB used 1.3mb, however the weired thing is, 900mb of space are Free. from perf counter I saw there had number of gen 2 gc collection happened, why GC collector cannot collect those 900mb free space in gen2 and LOB? I'm really appreicate for your help. following info are from windbg: 0:000> !eeheap -gc Number of GC Heaps: 1 generation 0 starts at 0x183153f0 generation 1 starts at 0x182aa834 generation 2 starts at 0x02131000 ephemeral segment allocation context: none segment begin allocated size 02130000 02131000 0312f284 0xffe284(16769668) 07750000 07751000 0874fc5c 0xffec5c(16772188) 09e30000 09e31000 0ae2fc2c 0xffec2c(16772140) 0b230000 0b231000 0c22ffec 0xffefec(16773100) 0c230000 0c231000 0d22f6f0 0xffe6f0(16770800) 0d230000 0d231000 0e22ea10 0xffda10(16767504) 0e230000 0e231000 0f22c1c4 0xffb1c4(16757188) 10390000 10391000 1138ddf4 0xffcdf4(16764404) 154e0000 154e1000 164da90c 0xff990c(16750860) 34aa0000 34aa1000 35a9dbfc 0xffcbfc(16763900) 7aca0000 7aca1000 7bc9edfc 0xffddfc(16768508) 49760000 49761000 4a75ef64 0xffdf64(16768868) 7bca0000 7bca1000 7cc99bac 0xff8bac(16747436) 17a70000 17a71000 183313fc 0x8c03fc(9176060) Large object heap starts at 0x03131000 segment begin allocated size 03130000 03131000 041250c8 0xff40c8(16728264) 08920000 08921000 099102f8 0xfef2f8(16708344) .... .... 4c760000 4c761000 4d71d578 0xfbc578(16500088) 1bb10000 1bb11000 1ca110d0 0xf000d0(15728848) 57760000 57761000 5862d7f8 0xecc7f8(15517688) Total Size: Size: 0x5ab13450 (1521562704) bytes. ------------------------------ GC Heap Size: Size: 0x5ab13450 (1521562704) bytes. 0:000> !dumpheap -stat total 0 objects Statistics: MT Count TotalSize Class Name 73037c78 1 12 System.Configuration.GenericEnumConverter 73036da0 1 12 System.Configuration.InfiniteIntConverter .... .... 69161c3c 35025 6809420 System.Windows.EffectiveValueEntry[] 69164748 54 12471072 MS.Internal.WeakEventTable+EventKey[] 710e2228 9540 190389260 System.Byte[] 710dd2b8 1317031 339257932 System.String 0035a670 6427 902224056 Free Total 3615631 objects

    Read the article

  • Display new image on web page

    - by RuiT
    Hello, I'm uploading images to a folder and I want to display each new image on a web page every time it is saved in the folder. I can display the initial image, which is already in the folder, and I can also detect when a new image is saved into the folder but I don't know how to display the new images. I'm new to web development. Can somebody help me? Here's the code: public partial class _Default : System.Web.UI.Page { string DirectoryPath = "C:\\Users\\Desktop\\PhotoUpload\\Uploads\\"; protected void Page_Load(object sender, EventArgs e) { FileSystemWatcher watcher = new FileSystemWatcher(); try { watcher.Path = DirectoryPath; watcher.Created += new FileSystemEventHandler(watcher_Created); watcher.EnableRaisingEvents = true; Image image = Image.FromFile(DirectoryPath + "inicial.jpg"); MemoryStream ms = new MemoryStream(); image.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg); byte[] im = ms.ToArray(); Context.Response.ContentType = "Image/JPG"; Context.Response.BinaryWrite(im); } catch (Exception ex) { } } void watcher_Created(object sender, FileSystemEventArgs e) { Console.WriteLine("File Created: Name: " + e.Name); try { //How to display new image? } catch (Exception ex) { } } }

    Read the article

  • Groovy / Scala / Java under the hood

    - by Jack
    I used Java for like 6-7 years, then some months ago I discovered Groovy and started to save a lot of typing.. then I wondered how certain things worked under the hood (because groovy performance is really poor) and understood that to give you dynamic typing every Groovy object is a MetaClass object that handles all the things that the JVM couldn't handle by itself. Of course this introduces a layer in the middle between what you write and what you execute that slows down everything. Then somedays ago I started getting some infos about Scala. How these two languages compare in their byte code translations? How much things they add to the normal structure that it would be obtained by plain Java code? I mean, Scala is static typed so wrapper of Java classes should be lighter, since many things are checked during compile time but I'm not sure about the real differences of what's going inside. (I'm not talking about the functional aspect of Scala compared to the other ones, that's a different thing) Can someone enlighten me? From WizardOfOdds it seems like that the only way to get less typing and same performance would be to write an intermediate translator that translates something in Java code (letting javac compile it) without alterating how things are executed, just adding synctatic sugar withour caring about other fallbacks of the language itself.

    Read the article

  • [android] Is it possible to receive SMS message on appWidget?

    - by cappuccino
    [Android] Hi, everyone. Is it possible to receive SMS message on appWidget? I saw android sample soucrce(API Demos). In API Demos, ExampleAppWidgetProvider class extends AppWidgetProvider, not Activity. So, I guess it is impossible to regist SMS Receiver like this, rcvIncoming = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { Log.i("telephony", "SMS received"); Bundle data = intent.getExtras(); if (data != null) { // SMS uses a data format known as a PDU Object pdus[] = (Object[]) data.get("pdus"); String message = "New message:\n"; String sender = null; for (Object pdu : pdus) { SmsMessage part = SmsMessage.createFromPdu((byte[])pdu); message += part.getDisplayMessageBody(); if (sender == null) { sender = part.getDisplayOriginatingAddress(); } } Log.i(sender, message); } } }; registerReceiver(rcvIncoming, new IntentFilter("android.provider.Telephony.SMS_RECEIVED")); My goal is to receive SMS message on my custom appWidget. any help would be appreciated!!

    Read the article

  • Windows cmd encoding change causes Python crash.

    - by Alex
    First I chage Windows CMD encoding to utf-8 and run Python interpreter: chcp 65001 python Then I try to print a unicode sting inside it and when i do this Python crashes in a peculiar way (I just get a cmd prompt in the same window). >>> import sys >>> print u'ëèæîð'.encode(sys.stdin.encoding) Any ideas why it happens and how to make it work? UPD: sys.stdin.encoding returns 'cp65001' UPD2: It just came to me that the issue might be connected with the fact that utf-8 uses multi-byte character set (kcwu made a good point on that). I tried running the whole example with 'windows-1250' and got 'ëeaî?'. Windows-1250 uses single-character set so it worked for those characters it understands. However I still have no idea how to make 'utf-8' work here. UPD3: Oh, I found out it is a known Python bug. I guess what happens is that Python copies the cmd encoding as 'cp65001 to sys.stdin.encoding and tries to apply it to all the input. Since it fails to understand 'cp65001' it crushes on any input that contains non-ascii characters.

    Read the article

  • Read Java in as Hex

    - by James
    Hi, I have tried to solve this but I keep coming up with stuff that is no help I'm sure this is easy (when you know how of course ;) ) What I would like to do is read in a file using a byte stream like below: while((read = in.read()) != -1){ //code removed to save space Integer.toHexString(read); System.out.println(read); } When it prints out the Hex to the screen it will print out numbers fine e.g 31 13 12 0 but when it comes to a hex code that should be 01 31 it will print 0 131. I want to read it in to a variable like you would see in a hex editor i.e 00 11 21 31 no single numbers as i need to scan the whole file and look for patterns which I know how to do I'm just stuck on this :/ so in short i need a variabe to contain the two hex characters i.e int temp = 01 not int temp = 0 , I hope this all makes sense, I'm a little confused as it's 3am! If anyone knows how to do this I would be most greatful, p.s thanks for the help in advance this site has saved me loads of research and have learnt a lot! Many thanks.

    Read the article

  • Trouble when changing pixel data with alpha on png on iphone --okay on simulator

    - by Ted
    I'm trying to change the color of the pixels (lighten or darken) without changing the value of the alpha channel using CGDataProviderCopyData. I leave every 4th databyte untouched. It work fine of the iphone simulator, however on the real thing the alpha goes white as I increase the values of the other pixels. I've tried changing just the first byte, or the second, or the third. Does anybody have any idea what is going on? The basic code is borrowed from Jorge. I like this simple approach --I'm new to this. But I want to make it work with png images with some transparency. here is most of the code by Jorge : CFDataRef CopyImagePixels(CGImageRef inImage){ return CGDataProviderCopyData(CGImageGetDataProvider(inImage)); } CGImageRef img=originalImage.CGImage; CFDataRef dataref=CopyImagePixels(img); UInt8 *data=(UInt8 *)CFDataGetBytePtr(dataref); int length=CFDataGetLength(dataref); for(int index=0;index255){ data[index+i]=255; }else{ data[index+i]+=value; } } } } size_t width=CGImageGetWidth(img); size_t height=CGImageGetHeight(img); size_t bitsPerComponent=CGImageGetBitsPerComponent(img); size_t bitsPerPixel=CGImageGetBitsPerPixel(img); size_t bytesPerRow=CGImageGetBytesPerRow(img); CGColorSpaceRef colorspace=CGImageGetColorSpace(img); CGBitmapInfo bitmapInfo=CGImageGetBitmapInfo(img); CGImageAlphaInfo alphaInfo = kCGBitmapAlphaInfoMask(img); NSLog(@"bitmapinfo: %d",bitmapInfo); CFDataRef newData=CFDataCreate(NULL,data,length); CGDataProviderRef provider=CGDataProviderCreateWithCFData(newData); CGImageRef newImg=CGImageCreate(width,height,bitsPerComponent,bitsPerPixel,bytesPerRow,colorspace,bitmapInfo,provider,NULL,true,kCGRenderingIntentDefault); [iv setImage:[UIImage imageWithCGImage:newImg]]; CGImageRelease(newImg); CGDataProviderRelease(provider);

    Read the article

  • How do you save and retrieve a Key/IV pair securely?

    - by Shawn Steward
    I'm using VB.Net's RijndaelManaged (RM) to encrypt files, using the RM.GenerateKey and RM.GenerateIV methods to generate the Key and IV and encrypting the file using the CryptoStream class. I'm planning on saving this Key and IV to a file and want to make sure I'm doing it the right way. I am combining the IV+Key, and encrypting that with my RSA Public key and writing it out to a file. Then, to decrypt I use the RSA Private key on this file to get the IV+Key, split them up and set RM.Key and RM.IV to these values and run the decryptor. Is this the best method to accomplish this, or is there a preferred method for saving the IV & Key? Also, what's the best way to construct and deconstruct the byte array? I used the .Concat method to join them together and that seems to work well but I can't seem to find something as easy to deconstruct it. I played with the .Take method that takes the first x # of bytes and it works for the first part but can't find anything that gets the rest of it.

    Read the article

  • how to implement a sparse_vector class

    - by Neil G
    I am implementing a templated sparse_vector class. It's like a vector, but it only stores elements that are different from their default constructed value. So, sparse_vector would store the index-value pairs for all indices whose value is not T(). I am basing my implementation on existing sparse vectors in numeric libraries-- though mine will handle non-numeric types T as well. I looked at boost::numeric::ublas::coordinate_vector and eigen::SparseVector. Both store: size_t* indices_; // a dynamic array T* values_; // a dynamic array int size_; int capacity_; Why don't they simply use vector<pair<size_t, T>> data_; My main question is what are the pros and cons of both systems, and which is ultimately better? The vector of pairs manages size_ and capacity_ for you, and simplifies the accompanying iterator classes; it also has one memory block instead of two, so it incurs half the reallocations, and might have better locality of reference. The other solution might search more quickly since the cache lines fill up with only index data during a search. There might also be some alignment advantages if T is an 8-byte type? It seems to me that vector of pairs is the better solution, yet both containers chose the other solution. Why?

    Read the article

  • Interface for reading variable length files with header and footer.

    - by John S
    I could use some hints or tips for a decent interface for reading file of special characteristics. The files in question has a header (~120 bytes), a body (1 byte - 3gb) and a footer (4 bytes). The header contains information about the body and the footer is only a simple CRC32-value of the body. I use Java so my idea was to extend the "InputStream" class and add a constructor such as "public MyInStream( InputStream in)" where I immediately read the header and the direct the overridden read()'s the body. Problem is, I can't give the user of the class the CRC32-value until the whole body has been read. Because the file can be 3gb large, putting it all in memory is a be an idea. Reading it all in to a temporary file is going to be a performance hit if there are many small files. I don't know how large the file is because the InputStream doesn't have to be a file, it could be a socket. Looking at it again, maybe extending InputStream is a bad idea. Thank you for reading the confused thoughts of a tired programmer. :)

    Read the article

  • How to tell when a Socket has been disconnected

    - by BowserKingKoopa
    On the client side I need to know when/if my socket connection has been broken. However the Socket.Connected property always returns true, even after the server side has been disconnected and I've tried sending data through it. Can anyone help me figure out what's going on here. I need to know when a socket has been disconnected. Socket serverSocket = null; TcpListener listener = new TcpListener(1530); listener.Start(); listener.BeginAcceptSocket(new AsyncCallback(delegate(IAsyncResult result) { Debug.WriteLine("ACCEPTING SOCKET CONNECTION"); TcpListener currentListener = (TcpListener)result.AsyncState; serverSocket = currentListener.EndAcceptSocket(result); }), listener); Socket clientSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); Debug.WriteLine("client socket connected: " + clientSocket.Connected);//should be FALSE, and it is clientSocket.Connect("localhost", 1530); Debug.WriteLine("client socket connected: " + clientSocket.Connected);//should be TRUE, and it is Thread.Sleep(1000); serverSocket.Close();//closing the server socket here Thread.Sleep(1000); clientSocket.Send(new byte[0]);//sending data should cause the socket to update its Connected property. Debug.WriteLine("client socket connected: " + clientSocket.Connected);//should be FALSE, but its always TRUE

    Read the article

  • BinaryWriterWith7BitEncoding & BinaryReaderWith7BitEncoding

    - by Tim
    Mr. Ayende wrote in his latest blog post about an implementation of a queue. In the post he's using two magical files: BinaryWriterWith7BitEncoding & BinaryReaderWith7BitEncoding BinaryWriterWith7BitEncoding can write both int and long? using the following method signatures: void WriteBitEncodedNullableInt64(long? value) & void Write7BitEncodedInt(int value) and BinaryReaderWith7BitEncoding can read the values written using the following method signatures: long? ReadBitEncodedNullableInt64() and int Read7BitEncodedInt() So far I've only managed to find a way to read the 7BitEncodedInt: protected int Read7BitEncodedInt() { int value = 0; int byteval; int shift = 0; while(((byteval = ReadByte()) & 0x80) != 0) { value |= ((byteval & 0x7F) << shift); shift += 7; } return (value | (byteval << shift)); } I'm not too good with byte shifting - does anybody know how to read and write the 7BitEncoded long? and write the int ?

    Read the article

  • CEIL is one too high for exact integer divisions

    - by Synetech
    This morning I lost a bunch of files, but because the volume they were one was both internally and externally defragmented, all of the information necessary for a 100% recovery is available; I just need to fill in the FAT where required. I wrote a program to do this and tested it on a copy of the FAT that I dumped to a file and it works perfectly except that for a few of the files (17 out of 526), the FAT chain is one single cluster too long, and thus cross-linked with the next file. Fortunately I know exactly what the problem is. I used ceil in my EOF calculation because even a single byte over will require a whole extra cluster: //Cluster is the starting cluster of the file //Size is the size (in bytes) of the file //BPC is the number of bytes per cluster //NumClust is the number of clusters in the file //EOF is the last cluster of the file’s FAT chain DWORD NumClust = ceil( (float)(Size / BPC) ) DWORD EOF = Cluster + NumClust; This algorithm works fine for everything except files whose size happens to be exactly a multiple of the cluster size, in which case they end up being one cluster too much. I thought about it for a while but am at a loss as to a way to do this. It seems like it should be simple but somehow it is surprisingly tricky. What formula would work for files of any size?

    Read the article

  • android upload progressbarr not working

    - by pieter
    I'm a beginner in Android programming and I was tryinh to upload an image to a server. I found some code here on stackoverflow, I adjusted it and it still doesn't work. The problem is my image still won't upload. edit I solved the problem, I had no rights on the folder on the server. Now I have a new problem. the progresbarr doesn't work. it keeps saying 0 % transmitted does anyone sees an error in my code? import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.app.ProgressDialog; import android.content.Context; import android.content.DialogInterface; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.location.Location; import android.location.LocationListener; import android.location.LocationManager; import android.os.AsyncTask; import android.os.Bundle; import android.util.Log; import android.view.View; import android.view.Window; import android.widget.Button; import android.widget.ImageView; import java.io.DataInputStream; import java.io.DataOutputStream; import java.io.File; import java.io.FileInputStream; import java.io.IOException; import java.net.HttpURLConnection; import java.net.URL; public class PreviewActivity extends Activity { /** The captured image file. Get it's path from the starting intent */ private File mImage; public static final String EXTRA_IMAGE_PATH = "extraImagePath" /** Log tag */ private static final String TAG = "DFH"; /** Progress dialog id */ private static final int UPLOAD_PROGRESS_DIALOG = 0; private static final int UPLOAD_ERROR_DIALOG = 1; private static final int UPLOAD_SUCCESS_DIALOG = 2; /** Handler to confirm button */ private Button mConfirm; /** Handler to cancel button */ private Button mCancel; /** Uploading progress dialog */ private ProgressDialog mDialog; /** * Called when the activity is created * * We load the captured image, and register button callbacks */ @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); requestWindowFeature(Window.FEATURE_INDETERMINATE_PROGRESS); setContentView(R.layout.preview); setResult(RESULT_CANCELED); // Import image Bundle extras = getIntent().getExtras(); String imagePath = extras.getString(FotoActivity.EXTRA_IMAGE_PATH); Log.d("DFHprev", imagePath); mImage = new File(imagePath); if (mImage.exists()) { setResult(RESULT_OK); loadImage(mImage); } registerButtonCallbacks(); } @Override protected void onPause() { super.onPause(); } /** * Register callbacks for ui buttons */ protected void registerButtonCallbacks() { // Cancel button callback mCancel = (Button) findViewById(R.id.preview_send_cancel); mCancel.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { PreviewActivity.this.finish(); } }); // Confirm button callback mConfirm = (Button) findViewById(R.id.preview_send_confirm); mConfirm.setEnabled(true); mConfirm.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { new UploadImageTask().execute(mImage); } }); } /** * Initialize the dialogs */ @Override protected Dialog onCreateDialog(int id) { switch(id) { case UPLOAD_PROGRESS_DIALOG: mDialog = new ProgressDialog(this); mDialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); mDialog.setCancelable(false); mDialog.setTitle(getString(R.string.progress_dialog_title_connecting)); return mDialog; case UPLOAD_ERROR_DIALOG: AlertDialog.Builder builder = new AlertDialog.Builder(this); builder.setTitle(R.string.upload_error_title) .setIcon(android.R.drawable.ic_dialog_alert) .setMessage(R.string.upload_error_message) .setCancelable(false) .setPositiveButton(getString(R.string.retry), new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int which) { PreviewActivity.this.finish(); } }); return builder.create(); case UPLOAD_SUCCESS_DIALOG: AlertDialog.Builder success = new AlertDialog.Builder(this); success.setTitle(R.string.upload_success_title) .setIcon(android.R.drawable.ic_dialog_info) .setMessage(R.string.upload_success_message) .setCancelable(false) .setPositiveButton(getString(R.string.success), new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int which) { PreviewActivity.this.finish(); } }); return success.create(); default: return null; } } /** * Prepare the progress dialog */ @Override protected void onPrepareDialog(int id, Dialog dialog) { switch(id) { case UPLOAD_PROGRESS_DIALOG: mDialog.setProgress(0); mDialog.setTitle(getString(R.string.progress_dialog_title_connecting)); } } /** * Load the image file into the imageView * * @param image */ protected void loadImage(File image) { Bitmap bm = BitmapFactory.decodeFile(image.getPath()); ImageView view = (ImageView) findViewById(R.id.preview_image); view.setImageBitmap(bm); } /** * Asynchronous task to upload file to server */ class UploadImageTask extends AsyncTask<File, Integer, Boolean> { /** Upload file to this url */ private static final String UPLOAD_URL = "http://www.xxxx.x/xxxx/fotos"; /** Send the file with this form name */ private static final String FIELD_FILE = "file"; /** * Prepare activity before upload */ @Override protected void onPreExecute() { super.onPreExecute(); setProgressBarIndeterminateVisibility(true); mConfirm.setEnabled(false); mCancel.setEnabled(false); showDialog(UPLOAD_PROGRESS_DIALOG); } /** * Clean app state after upload is completed */ @Override protected void onPostExecute(Boolean result) { super.onPostExecute(result); setProgressBarIndeterminateVisibility(false); mConfirm.setEnabled(true); mDialog.dismiss(); if (result) { showDialog(UPLOAD_SUCCESS_DIALOG); } else { showDialog(UPLOAD_ERROR_DIALOG); } } @Override protected Boolean doInBackground(File... image) { return doFileUpload(image[0], "UPLOAD_URL"); } @Override protected void onProgressUpdate(Integer... values) { super.onProgressUpdate(values); if (values[0] == 0) { mDialog.setTitle(getString(R.string.progress_dialog_title_uploading)); } mDialog.setProgress(values[0]); } private boolean doFileUpload(File file, String uploadUrl) { HttpURLConnection connection = null; DataOutputStream outputStream = null; DataInputStream inputStream = null; String pathToOurFile = file.getPath(); String urlServer = "http://www.xxxx.x/xxxx/upload.php"; String lineEnd = "\r\n"; String twoHyphens = "--"; String boundary = "*****"; // log pathtoourfile Log.d("DFHinUpl", pathToOurFile); int bytesRead, bytesAvailable, bufferSize; byte[] buffer; int maxBufferSize = 1*1024*1024; int sentBytes = 0; long fileSize = file.length(); // log filesize String files= String.valueOf(fileSize); String buffers= String.valueOf(maxBufferSize); Log.d("fotosize",files); Log.d("buffers",buffers); try { FileInputStream fileInputStream = new FileInputStream(new File(pathToOurFile) ); URL url = new URL(urlServer); connection = (HttpURLConnection) url.openConnection(); // Allow Inputs & Outputs connection.setDoInput(true); connection.setDoOutput(true); connection.setUseCaches(false); // Enable POST method connection.setRequestMethod("POST"); connection.setRequestProperty("Connection", "Keep-Alive"); connection.setRequestProperty("Content-Type", "multipart/form-data;boundary="+boundary); outputStream = new DataOutputStream( connection.getOutputStream() ); outputStream.writeBytes(twoHyphens + boundary + lineEnd); outputStream.writeBytes("Content-Disposition: form-data; name=\"uploadedfile\";filename=\"" + pathToOurFile +"\"" + lineEnd); outputStream.writeBytes(lineEnd); bytesAvailable = fileInputStream.available(); bufferSize = Math.min(bytesAvailable, maxBufferSize); buffer = new byte[bufferSize]; // Read file bytesRead = fileInputStream.read(buffer, 0, bufferSize); while (bytesRead > 0) { outputStream.write(buffer, 0, bufferSize); bytesAvailable = fileInputStream.available(); bufferSize = Math.min(bytesAvailable, maxBufferSize); bytesRead = fileInputStream.read(buffer, 0, bufferSize); sentBytes += bufferSize; publishProgress((int)(sentBytes * 100 / fileSize)); bytesAvailable = fileInputStream.available(); bufferSize = Math.min(bytesAvailable, maxBufferSize); bytesRead = fileInputStream.read(buffer, 0, bufferSize); } outputStream.writeBytes(lineEnd); outputStream.writeBytes(twoHyphens + boundary + twoHyphens + lineEnd); // Responses from the server (code and message) int serverResponseCode = connection.getResponseCode(); String serverResponseMessage = connection.getResponseMessage(); fileInputStream.close(); outputStream.flush(); outputStream.close(); try { int responseCode = connection.getResponseCode(); return responseCode == 200; } catch (IOException ioex) { Log.e("DFHUPLOAD", "Upload file failed: " + ioex.getMessage(), ioex); return false; } catch (Exception e) { Log.e("DFHUPLOAD", "Upload file failed: " + e.getMessage(), e); return false; } } catch (Exception ex) { String msg= ex.getMessage(); Log.d("DFHUPLOAD", msg); } return true; } } } the PHP code that handles this upload is following: <?php $date=getdate(); $urldate=$date['year'].$date['month'].$date['month'].$date['hours'].$date['minutes'].$date[ 'seconds']; $target_path = "./"; $target_path = $target_path . basename( $_FILES['uploadedfile']['name']) . $urldate; if(move_uploaded_file($_FILES['uploadedfile']['tmp_name'], $target_path)) { echo "The file ". basename( $_FILES['uploadedfile']['name']). " has been uploaded"; } else{ echo "There was an error uploading the file, please try again!"; } ?> would really appreciate it if someone could help me.

    Read the article

  • Noob - Cycle through stored names and skip blanks

    - by ActiveJimBob
    NOOB trying to make my code more efficient. On scroll button push, the function 'SetName' stores a number to integer 'iName' which is index against 5 names stored in memory. If a name is not set in memeory, it skips to the next. The code works, but takes up a lot of room. Any advice appreciated. Code: #include <string.h> int iName = 0; int iNewName = 0; BYTE GetName () { return iName; } void SetName (int iNewName) { while (iName != iNewName) { switch (byNewName) { case 1: if (strlen (memory.m_nameA) == 0) new_name++; else iName = iNewName; break; case 2: if (strlen (memory.m_nameB) == 0) new_name++; else iName = iNewName; break; case 3: if (strlen (memory.m_nameC) == 0) new_name++; else iName = iNewName; break; case 4: if (strlen (memory.m_nameD) == 0) new_name++; else iName = iNewName; break; case 5: if (strlen (memory.m_nameE) == 0) new_name++; else iName = iNewName; break; default: iNewName = 1; break; } // end of case } // end of loop } // end of SetName function void main () { while(1) { if (Button_pushed) SetName(GetName+1); } // end of infinite loop } // end of main

    Read the article

  • Is there a limit for the number of files in a directory on an SD card?

    - by jamesh
    I have a project written for Android devices. It generates a large number of files, each day. These are all text files and images. The app uses a database to reference these files. The app is supposed to clear up these files after a little use (perhaps after a few days), but this process may or may not be working. This is not the subject of this question. Due to a historic accident, the organization of the files are somewhat naive: everything is in the same directory; a .hidden directory which contains a zero byte .nomedia file to prevent the MediaScanner indexing it. Today, I am seeing an error reported: java.io.IOException: Cannot create: /sdcard/.hidden/file-4200.html at java.io.File.createNewFile(File.java:1263) Regarding the sdcard, I see it has plenty of storage left, but counting $ cd /Volumes/NO_NAME/.hidden $ ls | wc -w 9058 Deleting a number of files seems to have allowed the file creation for today to proceed. Regrettably, I did not try touching a new file to try and reproduce the error on a commandline; I also deleted several hundred files rather than a handful. However, my question is: are there hard limits on filesize or number of files in a directory? am I even on the right track here? Nota Bene: The SD card is as-is - i.e. I haven't formatted it, so I would guess it would be a FAT-* format. The FAT-32 format has hard limits of filesize of 2GB (well above the filesizes I am dealing with) and a limit of number of files in the root directory. I am definitely not writing files in the root directory.

    Read the article

  • Convert a raw string to an array of big-endian words with Ruby

    - by Zag zag..
    Hello, I would like to convert a raw string to an array of big-endian words. As example, here is a JavaScript function that do it well (by Paul Johnston): /* * Convert a raw string to an array of big-endian words * Characters >255 have their high-byte silently ignored. */ function rstr2binb(input) { var output = Array(input.length >> 2); for(var i = 0; i < output.length; i++) output[i] = 0; for(var i = 0; i < input.length * 8; i += 8) output[i>>5] |= (input.charCodeAt(i / 8) & 0xFF) << (24 - i % 32); return output; } I believe the Ruby equivalent can be String#unpack(format). However, I don't know what should be the correct format parameter. Thank you for any help. Regards

    Read the article

  • Flag bit computation and detection

    - by Majid
    Hi all, In some code I'm working on I should take care of ten independent parameters which can take one of two values (0 or 1). This creates 2^10 distinct conditions. Some of the conditions never occur and can be left out, but those which do occur are still A LOT and making a switch to handle all cases is insane. I want to use 10 if statements instead of a huge switch. For this I know I should use flag bits, or rather flag bytes as the language is javascript and its easier to work with a 10 byte string with to represent a 10-bit binary. Now, my problem is, I don't know how to implement this. I have seen this used in APIs where multiple-selectable options are exposed with numbers 1, 2, 4, 8, ... , n^(n-1) which are decimal equivalents of 1, 10, 100, 1000, etc. in binary. So if we make call like bar = foo(7), bar will be an object with whatever options the three rightmost flags enable. I can convert the decimal number into binary and in each if statement check to see if the corresponding digit is set or not. But I wonder, is there a way to determine the n-th digit of a decimal number is zero or one in binary form, without actually doing the conversion?

    Read the article

  • Converting an AnsiString to a Unicode String

    - by jrodenhi
    I'm converting a D2006 program to D2010. I have a value stored in a single byte per character string in my database and I need to load it into a control that has a LoadFromStream, so my plan was to write the string to a stream and use that with LoadFromStream. But it did not work. In studying the problem, I see an issue that tells me that I don't really understand how conversion from AnsiString to Unicode string works. Here is some code I am puzzling over: oStringStream := TStringStream.Create(sBuffer); sUnicodeStream := oPayGrid.sStream; //explicit conversion to unicode string iSize1 := StringElementSize(oPaygrid.sStream); iSize2 := StringElementSize(sUnicodeStream); oStringStream.WriteString(sUnicodeStream); When I get to the last line, iSize1 does equal 1 and iSize2 does equal 2, so that part is what I understood from my reading. But, on the last line, after I write the string to the stream, and look at the Bytes Property of the string, it shows this (the string starts as '16,159'): (49 {$31}, 54 {$36}, 44 {$2C}, 49 {$31}, 53 {$35}, 57 {$39} ... I was expecting that it might look something like (49 {$31}, 00 {$00}, 54 {$36}, 00 {$00}, 44 {$2C}, 00 {$00}, 49 {$31}, 00 {$00}, 53 {$35}, 00 {$00}, 57 {$39}, 00 {$00} ... I'm not getting the right results out of the LoadFromStream because it is reading from the stream two bytes at a time, but the data it is receiving is not arranged that way. What is it that I should do to give the LoadFromStream a well formed stream of data based on a unicode string? Thank you for your help.

    Read the article

  • Audio output from Silverlight

    - by leecarter
    I'm looking to develop a Silverlight application which will take a stream of data (not an audio stream as such) from a web server. The data stream would then be manipulated to give audio of a certain format (G.711 a-Law for example) which would then be converted into PCM so that additional effects can be applied (such as boosting the volume). I'm OK up to this point. I've got my data, converted the G.711 into PCM but my problem is being able to output this PCM audio to the sound card. I basing a solution on some C# code intended for a .Net application but in Silverlight there is a problem with trying to take a copy of a delegate (function pointer) which will be the topic of a separate question once I've produced a simple code sample. So, the question is... How can I output the PCM audio that I have held in a data structure (currently an array) in my Silverlight to the user? (Please don't say write the byte values to a text box) If it were a MP3 or WMA file I would play it using a MediaElement but I don't want to have to make it into a file as this would put a crimp on applying dynamic effects to the audio. I've seen a few posts from people saying low level audio support is poor/non-existant in Silverlight so I'm open to any suggestions/ideas people may have.

    Read the article

  • Why do I get empty request from the Jakarta Commons HttpClient?

    - by polyurethan
    I have a problem with the Jakarta Commons HttpClient. Before my self-written HttpServer gets the real request there is one request which is completely empty. That's the first problem. The second problem is, sometimes the request data ends after the third or fourth line of the http request: POST / HTTP/1.1 User-Agent: Jakarta Commons-HttpClient/3.1 Host: 127.0.0.1:4232 For debugging I am using the Axis TCPMonitor. There every things is fine but the empty request. How I process the stream: StringBuffer requestBuffer = new StringBuffer(); InputStreamReader is = new InputStreamReader(socket.getInputStream(), "UTF-8"); int byteIn = -1; do { byteIn = is.read(); if (byteIn > 0) { requestBuffer.append((char) byteIn); } } while (byteIn != -1 && is.ready()); String requestData = requestBuffer.toString(); How I send the request: client.getParams().setSoTimeout(30000); method = new PostMethod(url.getPath()); method.getParams().setContentCharset("utf-8"); method.setRequestHeader("Content-Type", "application/xml; charset=utf-8"); method.addRequestHeader("Connection", "close"); method.setFollowRedirects(false); byte[] requestXml = getRequestXml(); method.setRequestEntity(new InputStreamRequestEntity(new ByteArrayInputStream(requestXml))); client.executeMethod(method); int statusCode = method.getStatusCode(); Have anyone of you an idea how to solve these problems? Alex

    Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >