Search Results

Search found 18628 results on 746 pages for 'artificial neural network'.

Page 14/746 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Share 3G connection over WiFi-LAN network

  - by kush.impetus

  This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

  Read the article

• RoboCopy fails with "the specified network name is no longer available"

  - by Justin Scott

  We have a scheduled task that runs robocopy periodically to mirror a rather large folder structure from one server to another (thousands of folders, 100,000+ files, 50+ GB in size). There is a share on the receiving server where the mirror gets stored. We're running the task from the origin server connecting out to the share on the receiving end. Both servers run Windows Server 2003 and are connected to the same network switch (100Mbps). The process will sometimes complete all the way through without error. More often than not, however, at some point during the process (seems random as to where), robocopy will fail with the error The specified network name is no longer available. It will wait 30 seconds and try the file again and eventually give up after a number of retries. Process will repeat at the next schedule interval and may complete... or not. When this occurs I am not able to access the share at all on the destination server from anywhere on the network for up to 30 minutes. There is nothing else on the network using this share. My question is what does this error mean specifically? Why is the share "dropping off" and becoming inaccessible? Is there a way to prevent it and get the file mirroring to be more stable?

  Read the article

• Word documents very slow to open over network, but fine when opened locally - on one machine

  - by Craig H

  Windows XP, Word 2003, patched. The issue is happening with several Word documents stored on a network drive. The Word documents are clearly a bit wonky (i.e. one is 675k, but if you copy everything but the last paragraph marker into a new document, the new document is only 30k). But that's only part of the problem. On one weird machine, and one machine only, it takes ~20 seconds to open these Word documents from the network drive. Copy the file to C: on that werid machine? Opens immediately. Go to other machines (that are very similar - same patch level, etc.) and open the same document from the network? Opens immediately. Delete normal.dot? 20 seconds. Login with a different user on the weird machine? 20 seconds. Plug wonky machine into a different network port? 20 seconds. So the problem appears to be hardware related (i.e. wonky internal NIC) or related to a setting that is not profile specific. Any ideas? "Scrubbing" all the documents isn't ideal for several reasons. This is driving me nuts because I swear I ran into this before many years ago and eventually figured it out. But I appear to have lost my notes.

  Read the article

• Prevent Network Printers Automatically being added to 'Devices and Printers' in Windows 7

  - by Ben

  I think my question is a duplicate of this one, but the original question was never properly answered (the steps described are for Windows XP). I am aware of the option to "Turn off Network Discovery" (under Control Panel All Control Panel Items Network and Sharing Center Advanced sharing settings); I set this option (for both Home/Work and Private) but it doesn't seem to stop the printers getting added, and has the side effect of preventing me from browsing the list of machines on the network (which I need). I've tried the Windows XP registry option - but it doesn't seem to make any difference: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\NoNetCrawling I find it annoying having the printer list cluttered with printers from all over the office which I am never going to use (especially since lots of them no longer physically exist, users just haven't deleted them from their machines). This must be a real problem for people in massive offices with large numbers of printers - but I can't seem to find a lot of people complaining about it - which makes me think I'm missing something obvious. I don't really want to hack the firewall or turn off sharing completely, I still want to select and use network printers and file shares. Any ideas?

  Read the article

• Hyper-V Network Boot Legacy Network

  - by Carl

  Hi, I am planning out a Hyper-V R2 Cluster environment. I was wondering if I went to the effort of deploying one of the few methods to network boot from iSCSI inside the guests, whether the legacy network adapter would switch to a synthetic after boot, or whether the connection could be handed to a synthetic network after boot? This is obviously for performance reasons. MS suggests that some emulated devices are capable of switching to synthetic with integration services after boot, but doesn't specifically list all which are capable.

  Read the article

• Multiple network connections on a Windows 2008 domain controller (private network for NAS)

  - by Sysadminicus

  I have a Windows 2008 server connecting to an iSCSI target on an OpenSolaris box (yay ZFS!). I'd like to create a private network between the 2 boxes that is totally separate of my Windows domain. What is the best way to configure the additional network adapter on the Windows machine so it doesn't think the new subnet is part of the Windows domain? I want to make sure Windows doesn't magically start spewing active directory communications over the private wire and that it doesn't start poisoning the DNS with IPs from the private network.

  Read the article

• Setting up a WPA-PSK network card to connect to a WPA2 network

  - by mattshepherd

  I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network. I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head. It can find the network fine, but when I try to connect, I don't get the password prompt -- it moves straight to "validating identity," scans, and then says "Windows was not able to find a certificate to log you on to the wireless network Foo." The maddening thing is that the card was working fine a week ago, in the same box, using the same OS. I pulled everything out, swapped out the motherboard, and reinstalled Windows on a freshly wiped hard drive, and now I can't get it up and running again. Suggestions? I've taken several runs at it, including attempting to manually change the settings for the network to include WPA-PSK and AES and the password, and I'm a bit worried that I've totally boned everything. My router settings: ipconfig/all results from the XP box: Again, this card was working on this network a week ago. I can't figure out why I can't get it up and running now. There's no WPA2 on the card, just WPA and WPA-PSK: WPA-PSK was the only setting that would let me enter a network key. I had TKIP and AES as options there, but cipher type is AES on the router, so I chose that. (I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key. It's mixed letters and numbers, 32 characters long. No joy. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up. And if I try again and return to the settings again, it is reset to Open/AES. It also re-enables 802.1x in the Authentication tab if I've deselected it with WPA-PSK. It also reshortens the password. I have no idea how I blundered into getting this working in the past. I am, as you can tell, far from proficient at this. It was working before, though. What am I getting wrong?

  Read the article

• Are there any tests I can run on a network to simulate 100 heavy network users?

  - by marc.gayle

  I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

  Read the article

• Unusable network, packet losses between router and NIC

  - by KáGé

  I have this setup: Gigabyte P35-DS3P motherboard Asus NX1101 PCI network card (the one on the motherboard got fried a few years ago by a power surge) Asus RT-N16 router Windows 7 x64 I think the other specs are irrelevant here, but I'll post them if you say so. Until a week ago everything was fine, but then my network became unusable: websites start loading but timeout before anything would come through (true for the web interface of the router as well), I can't reach the computer from my notebook and Windows' ping utility measures a ~50% packet loss between the computer and the router. Pinging localhost is good. The router works completely fine when wired to my notebook. I also tested different ports on the router, different cables, different router and connecting directly to the modem, but it's still the same. Sometimes it works for a few minutes right after turning on the machine, but then it becomes crap again, but mostly it's useless from the start. I've tried updating the firmware on the router, updating the driver for the network card (after which I started getting BSoDs in every 15 minutes), reinstalling Windows, swapping to Fedora 15 but none of them changed anything. Does this mean that the network card is dying, or could it be something else? If it's the card, what model do you recommend as a replacement? (Could be PCI or PCI-Ex x1) Thanks for your help.

  Read the article

• Viewing CHM Files Across The Network in Windows 7

  - by Lukas Cenovsky

  When I try to open .chm help from a network shared drive I receive the following error: Navigation to the webpage was canceled. I know about the .reg solution described on KB896054 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions] "MaxAllowedZone"=dword:00000001 but it does not work in Windows 7. Any ideas how to make .chm help available from the network drives? Edit: I have the network path mapped to P: drive letter. My program runs from P: and I want to see the help for it. Copying the program to local drive is not a solution for me.

  Read the article

• Start script on network connect

  - by Nate Mara

  I am trying to get a GNU/Linux Bash script to run as soon as a network connection is established on my Raspberry Pi. I tried following the instructions on several pages: I have tried adding my script to /etc/network/if-up.d and running sudo chmod ugo+x on the file. I have tried adding the line post-up <path/to/script.sh> to /etc/network/interfaces I am really quite clueless here. More info: The script runs fine when manually run, here it is: http://pastebin.com/UJvt5HYU (I did remove my personal info (email addresses, passwords), but other than that, the script is unchanged. This script also uses the sendEmail program (can be found at http://caspian.dotconf.net/menu/Software/SendEmail/).

  Read the article

• network timeout how to analyse problem

  - by elhombre

  In the last three month I was experiencing that my internet connection started to get very slow and websites had long time to load. The first thing I made was an ping to www.google.com which showed that I was loosing pakets. Here some of the results: 64 bytes from 74.125.39.103: icmp_seq=2909 ttl=53 time=48.222 ms Request timeout for icmp_seq 2910 Request timeout for icmp_seq 2911 64 bytes from 74.125.39.103: icmp_seq=2912 ttl=53 time=44.372 ms Days later I had to reset my router because it wasn't able to establish a correct network connection. It was after the reset when things worked again for some days. But later the same network timeouts started to happen again. I would like to know how I can analyze the problem to get to the source which is causing this timeouts. Which steps do you take to circle in this Problem? My Network Laptop - Wireless Router modem - ISP EDIT: I am on a Mac OS X 10.6

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• Auto-detect proxy settings on network

  - by Ali Lown

  I am having problems trying to run web browser software on the local network through the proxy. When running off the profile drive which is on a network share, the system is unable to auto-detect proxy settings. When running off the local C drive, the browsers are able to correctly autodetect the settings. The error from the browser is about it being unable to fetch the proxy configuration file. Is this some form of authentication preventing it retreiving the settings when running of the network location? PS. Would this be better off on superuser?

  Read the article

• an unknown ip on network

  - by Ahmed safan

  In our office we have many PCs, all of them have static IP addresses. We had a problem with one server with ip 192.168.1.10 dropping off the network occasionally. I unplugged the network cable from the server and from pinged 192.168.1.10 from another host and there was a response. I searched all PCs to see if any has such ip but i didn't found a one. I changed the server ip to fix the problem, but I still find this rogue device using 192.168.1.10 on the network -- how can I figure out what it is? Could it be the ip of virtual machine on someone's PC?

  Read the article

• Windows 7 loses access to network drives

  - by dubRun

  Ok this is an odd one, but is happening often enough its getting quite annoying. I recently installed Windows 7 on my work computer (about 2 months ago) and every so often I lose access to network shares on our work network. Its one server in particular - other shares are still working fine. I have a number of folders mapped as a drive, and all of the ones on a particular file server have lost access. If I try to access the machine directly (\fileserver\d$) it doesn't work either with this message: Windows cannot access \fileserver\d$. You do not have permission to access \fileserver\d$. Contact your network administrator to request access Once I reboot the computer, access is restored like it should be. The computers are all on a domain and my user has administrator level access to the server in question.

  Read the article

• Creating a Network link between 2 buildings

  - by Adam

  Hey My company needs to create a network link between two buildings. Currently we have a cat5e network in one building and would like to connect some computers(about 15) in our second building to the main network in the first building. The distance between the two buildings is 30 metres. The 30 metres means going through a wall from the first building. Going through the car park and then through a wall into the other building. We can run any cables through speed ramps and so we do not need to dig up the road! Also the second building does not have an Internet connection and so we have to create some sort of cable link so that they can share our Internet connection. Ideas? Should we just run cat5e? Should we run fibre? Should we run coaxial?

  Read the article

• Hide network shared folder contents from users view

  - by user1157977

  I have this folder which i need to share it out on the network to facilitate patching from another pc but yet i want to prevent users from viewing the contents of the folder, is there any solutions for this? if i hide the folder and share it out on the network, i realized that when the user do a //192.168.x.x/ from another pc , the folder contents will still be visible even if its hidden. What i wanted to achieve is that the user will be able to access folder thru the network but not able to see any files within the folder (meaning he shd see a empty folder). Is it possible???

  Read the article

• Shared login in a computer network?

  - by Donald

  Hi, I need to understand how a network works: Several PCs running Windows XP One server The PCs are all network connected, as well as the server. Each computer share the logins. I need to understand what happens if I take off the server. Can I still login in each PC? Is the username:passwords on the server or in each computer? My final goal is to take off the server from the network and I need to know what is the server doing. What can he be doing? Thanks.

  Read the article

• Persistent network share connection not working with runas

  - by binarycoder

  If I use runas /user:DOMAIN\user cmd.exe (using XP), previously mapped persistent network drives are considered unavailable. net use shows: Status Local Remote Network ------------------------------------------------------------------------------- Unavailable H: \\SERVER\SHARE Microsoft Windows Network dir H: fails with "The system cannot find the path specified.". The connection is easily revived with `NET USE H: \SERVER\SHARE': not asked for a password when I do this. What is going on? Can I make Windows safely revive this drive automatically when it is first accessed.

  Read the article

• Windows printing: printer works locally, but over network it can't find driver

  - by JudahGabriel

  A friend has a Epson Stylus RX500 printer. She wants to share it between her WinXP desktop and her Win7 laptop. The printer is connected direct to her WinXP desktop, and she can print fine from there. But the Win7 laptop can't print -- it can see the shared printer on the network, but it can't find a driver for it. (And looking on the web, I don't see any Win7 drivers for it.) However, if I connect the printer directly to the Win7 laptop, it works, it can print. This suggests that there is a driver for it, but for some reason, it can't find a driver when connecting to the printer over the network. My question is: if a printer works when connected directly to the machine, should it still work over the local network?

  Read the article

• Basic questions about network topologies

  - by laoshanlung

  I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

  Read the article

• Why are network printers not available in the Add Printer Wizard...when run over a network?

  - by Kev

  From a Windows 2003 server machine I browsed the network to an XP client (\computername in Explorer) then double-clicked Printers and Faxes and then Add Printer. In the wizard, normally the second screen asks if you want to install a local printer or a network printer. Well, in this case, it seems to assume I want a local printer, because the second screen is what would normally be the third screen if you chose local printer and clicked Next. I want to install a network printer on a remote machine for its local users. Is this not possible? If not, why not?

  Read the article

• Advise on a 240,000 sqft outdoor wireless network

  - by whlspacedude

  I would be very appreciative of some advice in the purchase of equipment to provide a wireless network that covers the entire area of an outdoor arena. The area is rectangular-ish in shape. 400ft wide and 600ft long. It has 6 light towers, 1 on each of the 400 foot ends and 2 on each of the 600 foot ends. I can mount on anything and spend as much money as needed. The needs of the network would be to provide access for, up to 15 wireless HD cameras with audio, and a public-wifi network. Can someone point me in the right direction as far as equipment and antennas ? I can provide any additional information that you may need.

  Read the article

• Dropbox style folder for network drives

  - by Toby Allen

  Does anyone know of a third party (or even windows native) solution to this simple problem. I want to map an internal network share on our windows server to a folder on each of the client machines in the network. I dont want to have to use Drive Letters I would just like to set up a Folder on my C drive that is actually a windows share eg C:\DATA\Network Docs is actuallyp pointing to \\Server\SharedData\ Is this possible? Is there a third party solution that does it? All clients are Windows XP and Windows 7.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >