Search Results

Search found 1203 results on 49 pages for 'jack juiceson'.

Page 14/49 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • wireless problem: Internet slow connection or limited connectivity

    - by jack
    Hi I have no idea on this problem. My wireless connection doesn't work sometimes. I find it's due to my XP and I have no problem with my Win 7 machine. The problem is - Internet Connection a bit slower than usual Limit connectivity issue I use netsh reset for resetting network configurations but it helps sometimes or not help at all. Any ideas? Thank you.

    Read the article

  • Unmounted root partition

    - by Jack
    My server running Debian lenny has just had a power cut recently and its come back up with the root partition in read only mode. I tried to remount the filesystem in read write mode with mount -n -o remount,rw / which then gave the output mount: block device /dev/hda1 is write-protected, mounting read-only. But now the root filesystem isn't mounted at all so I can't run anything to mount the partition again or any other command for that matter such as shutdown because /bin/ isn't there. Is there anything I can do remotely?

    Read the article

  • Generating new SID for Windows 7 cloned partition in Linux?

    - by Jack
    So I've read that the proper way to clone a Windows 7 partition is to run a Sysprep after the clone is complete. For MANY reasons, this is not possible the way we are cloning these drives (long story short, the drive should be fully up and running after we clone it, with all the settings already there and requiring no user intervention; and no, not even an answer file would work because the way we customize all the Win7 settings is complex and we do not want the user touching the settings). I understand Microsoft will not support Windows 7 clones if it is not sysprepped and that is fine for us. Acronis recovery tools get around this by ticking an option called "Create new NT signature", which resets the SID and GUID on any restore. Symantec has a tool called Ghostwalker which does the same thing. However, we are looking for a way to do this in Linux because we want to use open source tools to do the imaging (fsarchiver, partclone, etc. basically the same tools Clonezilla uses internally to clone NTFS partitions). The question is, if we clone using these tools in Linux, how would we generate a new SID thereafter (without the use of sysprep)? Is there any way to do it within a Linux environment? The whole image process is automated so if it is a simple command that I can just throw in my shell script, that would be even better. Of course, it would be nice to know if this is even possible. Any ideas? EDIT: Forgot to mention that the target machines we are restoring the image on are EXACTLY the same.

    Read the article

  • Can't install Ubuntu, black screen after install

    - by Tyrone
    I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

    Read the article

  • Computer prints blank pages before and after content

    - by Cpt. Jack
    This would seem like a pretty simple question but I have exhausted every idea I can come up with. I bought a brand new Dell Latitude E5410 not too long ago with Windows 7 OS. I installed office 2010 on the machine right away and have had a printing problem since day one. For some reason every time I print a page, a blank page prints out before and after the content print. This also applies to any other application such as notepad or printing an email. If I have a 6 page document, it still prints out one page before and after every content page. Meaning I get my 6 page document along with 12 blank pages. I can't figure out why this would be some sort of default setting or what would cause this printing configuration. I am the only computer on the network that has this problem and quite frankly I'm getting tired of it. Can anyone help me figure this out or steer me in the right direction to correcting this problem?

    Read the article

  • Why is my Mac contacting Romania?

    - by Jack
    I just used Onyx to clean out my caches and log files after which I did a reboot. Browsing the "All Messages" panel of the Console app I noticed this line: 10/27/13 3:38:03.000 PM kernel: 5.106.198.19 Since I did not recognize that IP I did a whois and to my surprise found out that it points to Eurolan Solutions in Romania. So my question is why is my Mac 10.7.5 contacting Romania and how can I stop this from happening? Many thanks

    Read the article

  • Bad sound quality of 3.5mm headphone with mic on laptop

    - by Isaac
    I have a set of headphones that have a built-in mic for hands-free calling. They just work great on my Sony Ericsson Cedar cellphone. The problem is that when I connect headphone to my Dell N5010 laptop to listen to music, the quality is horrible, with very weak or no vocals. They funny part is when I hold down the talk button on the mic (headphone mic), at which point it sounds great, but goes back to bad quality as soon as I release talk button. Also, when I take out the jack a little, at some point, the sound is great but I have to hold the jack there. I looked for any configuration on the sound card driver but find nothing. Besides using a glue to hold down the talk button of mic :), is there any other solution?

    Read the article

  • Fluxbox startup file not working

    - by Jack
    I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox. It doesn't matter what app I try, so it isn't an app problem. here is my startup file: #!/bin/sh # # fluxbox startup-script: # # Lines starting with a '#' are ignored. # Change your keymap: xmodmap "/home/josh/.Xmodmap" # Applications you want to run with fluxbox. # MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END. tint2 & tilda & # And last but not least we start fluxbox. # Because it is the last app you have to run it with ''exec'' before it. exec fluxbox # or if you want to keep a log: # exec fluxbox -log "/home/josh/.fluxbox/log" I have also tried tests such as "touch ~/testwoked" and such, nothing works. It makes no difference if the file is executable or not.

    Read the article

  • Windows powering off after "preparing your desktop" stage.

    - by Jack
    Windows 7 64 bit. The only recent change was I installed two updates for MS Office, and a cumulative security update for IE. As soon as I choose a user and login, after loading my user profile it states the preparing your desktop message, and then powers off. I have used DaRT to check the event log, but nothing is recorded. Ideas?

    Read the article

  • What are the things to look out for when adding other domain user to your IIS?

    - by Jack
    I have a Windows Server 2008 R2 called Jack11 that joined a domain called Watson.org. It has IIS 7 installed. From my understanding, we need to add the following into the web.config file <system.web> <identity impersonate="true" /> </system.web> Also, we need to ensure that the server Jack11 can ping to the domain Watson.org. What other setting do we need to setup in order for a user of domain Watson.org (e.g. the user Watson\User1 to access the application in the Server IIS? This is because currently, there is a problem as follows: Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'WATSON\User1'. The error message was displayed when the user User1 wish to access one of the web application in server Jack11 IIS and that web application also do some retrieval of records from the database, which is installed in SQL Server 2008 Enterprise located in the same server Jack11.

    Read the article

  • Protecting PHP packages on server

    - by Jack
    Hi, I am a php developer and have recently decided to make one of my Magento extensions commercial. I have downloaded and configured MageParts CEM Server and that is all working perfectly in regard to licencing and delivery of module packages. The only issue is that the directory that the packages are stored in could be accessed by anyone. I tried this in a .htaccess file, but now it is not working. <Files services.wsdl> allow from all </Files> deny from all Clients are receiving a 403 Forbidden response. Have I done something wrong in the .htaccess file or would there be a better way to secure the directory? Any help would be greatly appreciated.

    Read the article

  • wusa in server 2008 R2

    - by Jack
    I need to use wusa to uninstall a particular update that is causing a reboot loop. I can access winre and dism, but wusa gives command not found. Does wusa not come with r2, or is it not available in the built-in WinRE or what?

    Read the article

  • stdout and key press

    - by Jack
    Hi, when in console, if I press a key, some interrupt controller sends code of that key to CPU, which looks into some table and than represent that keypress by printing some charracter to stdout. But, is keyboard sending an ASCII code of that key, or just some standardised code? Since there is so many languages and extra characters, OS must further translate its code into some character according to user selected scheme, I guess. I ask, becouse I am from Czech Republic, and we use some characters that do not exists in standart ASCII code. So I was thinking, if I enter this character into a console, and then print it, lets say in C++ using cin and cout, and I have set locale to Czech, stdin must actually send some non-ASCII code of the character I pressed to input stream. Am I right?

    Read the article

  • x86 exceptions and flags

    - by b-gen-jack-o-neill
    Hi, please, I know that when you for example divide by zero, the aproptiate flag is set in CPU flag register. But today I read that there are special interrupt vectors (I think the first 16 in IVT) that are used for such conditions like dividing by zero. So, what I want to ask is, does any situation that couses change som flag also triggers apropriate interrupt? Becouse in school, we used conditional jumps that checks wheather carry flag has been set or not, and I don´t remember there was some interrupt triggerd by that. So I am pretty confused now.

    Read the article

  • Outlook 2007 message formatting - pasted images

    - by Jack
    When you cut and past an image into a message window when composing a new email, the image will display as you would expect and formatting the image appears straight forward, However the pain happens when you click send. The recipient notices that the image will resize with the size of there outlook window. The original image size is ignored and no scrollbars appear. Howe do you stop this behaviour. When said image is pasted, say you want to place a graphic on top of the image such as an arrow. By using the ribbon, selecting the insert tab and choosing shapes, you go ahead and select the arrow shape and plonk it on to of the image, just where you want it, give it a nice colour and then send the email. As the recipient resizes there outlook message window, the image resizes but the shape remains where it was, now who wants that micros*a*ft! So, how do you A) make the shape resize with the image, so the shape stays where I put it in relation to the image, and b) stop the image resizing in the first place.

    Read the article

  • Windows 2003 registry corrupt - endless reboot

    - by Jack
    Windows 2003 will run the loading screen then it stop with "Stop c000218 registry file failure or corrupt. The registry can not load the hive \systemroot\system32\config\security" then it start a count down about dumping the physical memory to disk and reboot itself again. I found Error starting Windows SBS 2003 - STOP: c0000218 but the config is different directory than mine. Is it the same step to try for recovery console?

    Read the article

  • How to configure CISCO switch 2960 for port-based address allocation on a single port only?

    - by Jack
    CISCO 2960 allows you to configure so-called Port-Based address allocation. It makes the switch to associate IP address it is giving out via DHCP with port-identifier, which is random, switch created identifier. In practice it means that any machine connected to such configured port will always get the same IP address, regardless of what that machine's MAC address is. I want to have that feature configured on --some ports-- only. But no matter what commands I try it seems that this can only be done for all ports, all for none. Even though CISCO manual seems to indicate there's both global and per-port command to enable that. Here are relevant commands from CISCO manual: configure terminal ip dhcp use subscriber-id client-id (this configures the DHCP server to globally use the subscriber ID as the client ID on all incoming DHCP messages) interface FastEthernet0/1 ip dhcp server use subscriber-id client-id (Optional: Configures the DHCP server to use the subscriber ID as the client ID on all incoming DHCP messages on the interface) but it appears if I configure only per-interface than there's no effect at all, if I configure globally and per interface - CISCo behaves as if all ports were configured to use that feature. Any ideas?

    Read the article

  • Windows 8 Pro Homegroup Not Allowing Access to Shared Files

    - by Jack Herr
    I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

    Read the article

  • Securing php on a shared apache

    - by Jack
    I'm going to install apache+php in a server where two users, A and B, will deploy their website. I'm trying to achieve isolation of users' space for security reasons: that is no scripts from site A should be able to read files in site B. To achieve this I installed suphp. Website files of user A are owned by A:A with perm=700 and user of B are owned by B:B with perm=700. Suphp works great, but apache complains about permissions to read .htaccess. How can I let apache to read .htaccess in every dir of A and B while keeping isolation between site A and site B? I played with ownership (group = www-data) and permissions (750) but I found no way to keep isolation granted. Any idea? Maybe by running apache as root, but in this case are there any drawbacks?

    Read the article

  • How do I prevent libvirt from adding iptables rules for guest NAT networks?

    - by Jack Douglas
    Similar to this old request on BugZilla for Fedora 8, I'm hoping something has changed since then or someone knows another way. I want to manage the iptables rules by hand—the one-size-fits-all automatic rules don't suit me at all. These rules seem to be added and removed when a network is started and destroyed. Is there a way of either preventing these rules being added at all or hooking a script into the network start that restores the default rules afterwards. For now, I'm using a very crude method with cron, but I hope there is a better way: * * * * * root iptables-restore < /etc/sysconfig/iptables

    Read the article

  • problem with zsh interactive shell

    - by Jack
    When I use zsh in interactive mode, I get some glitches. This mainly happens when the command spills over onto a new line and I use backspace, with backspace leaving behind some glitches on the screen and moving the cursor to an odd position. It happens in a VT, in xterm and urxvt, although it is most noticeable with my chosen terminal, urxvt. When I use zsh as a login shell, it does not happen at all. What could be causing this?

    Read the article

  • Technicolor TG582n with external DHCP server [on hold]

    - by Jack
    We have a small home setup with a Technicolor TG582n on Plusnet ISP. We have a Samba4 DC with DNS forwarding enabled. The DC forwards to the Technicolor. However, the client machines have their DNS settings manually set. This is an annoyance when using laptops on other networks. We would like to have DHCP handled on the server machine, such that when a client connects to the Technicolor, it gets its IP and DNS information from the DHCP server, eliminating the need to manually set adapter DNS settings. However, I cannot find an option to disable DHCP on the Technicolor and am not completely clear on how one would point DHCP services to the server from the Technicolor if there were the option. So, how would one make the Technicolor use an external server for DHCP leases?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >