Search Results

Search found 1961 results on 79 pages for 'paul t davies'.

Page 14/79 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• External drive hanging, load average through the roof

  - by Paul Tomblin

  I have an external USB drive, and I run an hourly rsync to it as a backup. This has been working fine for years. This weekend, I got two new 2Tb internal drives, and decided it was time to re-install Ubuntu from scratch to clear out all the old cruft. About once a day since the re-install, the backup script hangs hard, usually in the "rm -rf" I do before the rsync. By the time I notice the problem, my load average is in the stratosphere and climbing fast (one time, it was over 150), but anything that doesn't touch the drive seems to be running fine. One thing that I find suspicious is that something, I don't know what, is doing a "smartctl" and a "hdparm" command on the USB drive. I'm pretty sure smartctl isn't supposed to run on external drives. I can't figure out what's doing it, either. Here's part of ps auwwfx when it's hung: root 7310 0.0 0.0 4248 352 ? D 20:15 0:00 /sbin/hdparm -C /dev/sdd root 7808 0.0 0.0 17372 1632 ? D 20:15 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 8427 0.0 0.0 4248 356 ? D 20:20 0:00 /sbin/hdparm -C /dev/sdd root 8925 0.0 0.0 17372 1628 ? D 20:20 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 9529 0.0 0.0 4248 356 ? D 20:25 0:00 /sbin/hdparm -C /dev/sdd root 10026 0.0 0.0 17372 1628 ? D 20:25 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 10655 0.0 0.0 4248 356 ? D 20:30 0:00 /sbin/hdparm -C /dev/sdd root 11151 0.0 0.0 17372 1632 ? D 20:30 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 11774 0.0 0.0 4248 356 ? D 20:35 0:00 /sbin/hdparm -C /dev/sdd root 12271 0.0 0.0 17372 1628 ? D 20:35 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 12878 0.0 0.0 4248 352 ? D 20:40 0:00 /sbin/hdparm -C /dev/sdd root 13374 0.0 0.0 17372 1632 ? D 20:40 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 14011 0.0 0.0 4248 352 ? D 20:45 0:00 /sbin/hdparm -C /dev/sdd root 14507 0.0 0.0 17372 1628 ? D 20:45 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 15116 0.0 0.0 4248 352 ? D 20:50 0:00 /sbin/hdparm -C /dev/sdd root 15612 0.0 0.0 17372 1632 ? D 20:50 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 16223 0.0 0.0 4248 352 ? D 20:55 0:00 /sbin/hdparm -C /dev/sdd root 16734 0.0 0.0 17372 1632 ? D 20:55 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 17345 0.0 0.0 4248 352 ? D 21:00 0:00 /sbin/hdparm -C /dev/sdd root 17842 0.0 0.0 17372 1628 ? D 21:00 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 18463 0.0 0.0 4248 352 ? D 21:05 0:00 /sbin/hdparm -C /dev/sdd root 18960 0.0 0.0 17372 1628 ? D 21:05 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 19598 0.0 0.0 4248 356 ? D 21:10 0:00 /sbin/hdparm -C /dev/sdd root 20096 0.0 0.0 17372 1628 ? D 21:10 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 21280 0.0 0.0 4244 356 ? D 21:15 0:00 /sbin/hdparm -C /dev/sdd root 21784 0.0 0.0 17372 1632 ? D 21:15 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 22414 0.0 0.0 4244 356 ? D 21:20 0:00 /sbin/hdparm -C /dev/sdd root 22912 0.0 0.0 17372 1628 ? D 21:20 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 23541 0.0 0.0 4244 356 ? D 21:25 0:00 /sbin/hdparm -C /dev/sdd root 24038 0.0 0.0 17372 1632 ? D 21:25 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 24658 0.0 0.0 4244 356 ? D 21:30 0:00 /sbin/hdparm -C /dev/sdd root 25157 0.0 0.0 17372 1628 ? D 21:30 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd Why is this happening, and how can I stop it?

  Read the article

• Temporary Tables in Stored Procedures

  - by Paul White

  Ask anyone what the primary advantage of temporary tables over table variables is, and the chances are they will say that temporary tables support statistics and table variables do not. This is true, of course; even the indexes that enforce PRIMARY KEY and UNIQUE constraints on table variables do not have populated statistics associated with them, and it is not possible to manually create statistics or non-constraint indexes on table variables. Intuitively, then, any query that has alternative execution...(read more)

  Read the article

• Oracle Certification Survey - Becoming Oracle Certified

  - by Paul Sorensen

  At Oracle University, we're interested to know what kinds of challenges you face as you approach your task of getting certified. We know that getting Oracle certified is not an easy process, and we would like your input on which factors tend to be more or less of an issue to you personally. Our hope is that the results of this survey will help not only further improve the Oracle Certification Program but make it more accessible as well.If you are certified, in the process of getting certified, or have ever considered certification - please take a moment to respond to our eight-question survey. It should only take you 3-5 minutes to complete.TAKE THE SURVEY NOW: "BECOMING ORACLE CERTIFIED"(8 questions)Thank you in advance for your participation.

  Read the article

• Advantages and disadvantages of libgdx [on hold]

  - by Paul

  I've been an android developer for a while and am thinking about getting into gaming. While looking for a game dev framework, I thought libgdx provides very friendly documentation and functionality. So I would like to use it if there is no big obstacle. But when I tried to see how many developers employ this library, I could find not that many. Is there anything wrong with this library? In other words, I would like to know its advantages or disadvantages from any experienced developer. UPDATE: After reviewing its documentations and trying to build simple games with libgdx, I decided to go with it as its documentations are good enough and its community is very active. What I liked the most is that it provides a bunch of demo games that I can learn a lot from.

  Read the article

• Does Huawei E398 LTE Modem works with Netgear Router?

  - by Paul Smith

  I've been using a Netgear router sharing the signal through my Huawei E160 dongle, but following the speeds update and the device limit, it does not satisfy the demand. Through research, I've found that Huawei E398 is the latest and functional dongle so far. I'm going to update, but the confusion comes: Is it compatible for my Netgear router? Will it work? Any information will be appreciated. I found the unlocked E398 here.

  Read the article

• Undocumented Query Plans: Equality Comparisons

  - by Paul White

  The diagram below shows two data sets, with differences highlighted: To find changed rows using TSQL, we might write a query like this: The logic is clear: join rows from the two sets together on the primary key column, and return rows where a change has occurred in one or more data columns.  Unfortunately, this query only finds one of the expected four rows: The problem, of course, is that our query does not correctly handle NULLs.  The ‘not equal to’ operators <> and != do not evaluate...(read more)

  Read the article

• 32-bit ODBC on Windows Server 2008 R2

  - by John Paul Cook

  Heterogeneous data access requires having the right drivers. If you have to use 32-bit ODBC drivers, you won’t find then when you start the Microsoft ODBC Administrator because it is 64-bit. The 32-bit ODBC Administrator is found here: C:\Windows\SysWOW64\odbcad32.exe You might want to make a shortcut for it to make it easy to find. You’ll need to use it when make 32-bit ODBC data connections. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!...(read more)

  Read the article

• convert image to spritesheet of tiles for isometric map?

  - by Paul

  is there a way to convert an isometric image (like the first image) to a spritesheet (like the second image), in order to place each image on the isometric map with the code? The map looks like the first image, but some buildings are bigger than just one tile, so I need several squares (let's say the first image is a building, made of multiple tiles with different colors), and each square is placed with an offset of 64x32. The building is created in Blender and I save the image with the isometric perspective. But I have to split each square from this image in order to have the spritesheet, maybe there is smarter way, or a java software that would make the conversion for me?

  Read the article

• ERROR running Bumblebee on 13.10

  - by paul

  I'm trying to get Bumblebee working again after an upgrade to Saucy. Running software with Optirun gives the following output: optirun nvidia-settings [ 45.697126] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context [ 45.697179] [ERROR]Aborting because fallback start is disabled. Does anyone know how to fix this? Thanks! :)

  Read the article

• How to position a sprite in a 2D animation skeleton?

  - by Paul Manta

  Given two joints that define a bone, I would like to know how to decide where, between those two joints, I should draw the sprite. This should be a fairly simple thing to solve, but there is one thing that I am not sure about. After I've determined the rotation of the sprite (which is the absolute angle the joints form with the x-axis), I also need to determine the origin point from where I need to start drawing the transformed image. So how should I position the sprite between the two joints? Should I make the center of the image be the midpoint between the two joints, or should I make one the of the joints be the origin? Do these things matter that much (could the wrong positioning make the sprite move oddly during the animation)?

  Read the article

• Oracle Linked Servers on Windows Server 2008 R2

  - by John Paul Cook

  Oracle hasn’t yet released versions of its client software for Windows Server 2008 R2. If you need to create an Oracle linked server, that’s a problem. You’ll see this installation block when attempting to install the Oracle client software for Windows Server 2008: It’s very simple to fix. Check the first checkbox to make the installer ignore the version check. Click Next and ignore the warning you’ll see. The installation should complete successfully. Windows does offer various strategies for mitigating...(read more)

  Read the article

• The Information Driven Value Chain - Part 1

  - by Paul Homchick

  One hundred years ago, there were places on Earth that no man had ever seen.  Today, a man standing in one of those places can instantaneously communicate with someone who may be strolling down the street on his way to lunch half way around the globe.  Our world is shrinking and becoming virtual. It is a world of incredible bounty and speed where we can get a product delivered to us anywhere on earth within a day or two. However, this world is also one of challenge where volatility, uncertainty, risk and chaos are our daily companions. To prosper amid the realities of this new world, the enterprise needs a business model. Globalization and instant communications demand greater operational flexibility than ever before. Extended supply chains have elevated the management of risk to a central concern, and regulatory demands from multiple governments place an increasing burden of compliance on companies. Finally, the speed of today's business requires continuous innovation to keep from falling behind the global competition.

  Read the article

• SQL Intersection Conference, Las Vegas MGM Grand 10-13 November 2014

  - by Paul White

  I am very pleased to announce that I will be speaking at the SQL Intersection conference in Las Vegas again this year. This time around, I am giving a full-day workshop, "Mastering SQL Server Execution Plan Analysis" as well as a two-part session, "Parallel Query Execution" during the main conference. The workshop is a pre-conference event, held on Sunday 9 November (straight after this year's PASS Summit). Being on Sunday gives you the whole Monday off to recover and before the...(read more)

  Read the article

• Two Sun Certification Exams To Retire August 1, 2010

  - by Paul Sorensen

  Effective August 1, 2010, Exam CX-310-400 ("Sun Certified Integrator for Identity Manager 7.1"), currently part of the "Sun Certified Integrator for Identity Manager 7.1" certification track, will be retired. We will also retire Exam CX-310-502 ("Sun Certified Java CAPS Integrator"), currently within the "Sun Certified Java CAPS Integrator" certification track. Both exams will remain available for registration and testing at Prometric Testing Centers through July 31, 2010.CREDENTIAL VALIDITYPlease note that that these credentials remain valid indefinitely for those holding the certifications. These retirements therefore have no effect on those who complete the certification requirements before August 1, 2010.QUICK LINKSRetiring Exams:Exam CX-310-400 "Sun Certified Integrator for Identity Manager 7.1"Exam CX-310-502 "Sun Certified Java CAPS Integrator" Certification Tracks:Sun Certified Integrator for Identity Manager 7.1Sun Certified Java CAPS IntegratorLearn more: Oracle Certification Retirements

  Read the article

• Beyond S&OP: Integrated Business Planning

  - by Paul Homchick

  In most corporations, planning is done at the department level — leaving disconnects and gaps across different departments. Finance sets revenue and profit goals with minimum validation from Manufacturing that the company has the resources, material, capacity, or demand to reach these goals. On the operations side, Manufacturing is developing plans to balance demand and supply but seldom knows if the resulting "plan" will meet the budgets on which the company's revenue and profit goals are based. The Sales department agrees to quotas that meet Finance's revenue goals without a complete understanding of what manufacturing can deliver. Integrated Business Planning (IBP) bridges these gaps in corporate planning systems. Integrated Business Planning integrates the financial planning provided by EPM systems with operations planning provided by Sales and Operations Planning solutions. This means that revenue goals and budgets are validated against a bottom-up operating plan, and that the operating plan is reconciled against financial goals. When detailed changes are made to the operations plan, planners can immediately see the big picture impact of the changes. IBP also addresses one the CFO's big concerns—the reliability of the revenue forecast. Operating plans are updated daily or weekly from a precise forecast based on current market conditions. These updated plans are then made available so that financial analysts are working with data that best represents what is going to happen - not what they projected would happen based on last quarter's data. For a discussion in more depth, see my article: Improve Reliability of Financial Forecasts with Integrated Business Planning in Supply & Demand Chain-Executive Magazine.

  Read the article

• Beyond S&OP: Integrated Business Planning

  - by Paul Homchick

  In most corporations, planning is done at the department level — leaving disconnects and gaps across different departments. Finance sets revenue and profit goals with minimum validation from Manufacturing that the company has the resources, material, capacity, or demand to reach these goals. On the operations side, Manufacturing is developing plans to balance demand and supply but seldom knows if the resulting "plan" will meet the budgets on which the company's revenue and profit goals are based. The Sales department agrees to quotas that meet Finance's revenue goals without a complete understanding of what manufacturing can deliver. Integrated Business Planning (IBP) bridges these gaps in corporate planning systems. Integrated Business Planning integrates the financial planning provided by EPM systems with operations planning provided by Sales and Operations Planning solutions. This means that revenue goals and budgets are validated against a bottom-up operating plan, and that the operating plan is reconciled against financial goals. When detailed changes are made to the operations plan, planners can immediately see the big picture impact of the changes. IBP also addresses one the CFO's big concerns—the reliability of the revenue forecast. Operating plans are updated daily or weekly from a precise forecast based on current market conditions. These updated plans are then made available so that financial analysts are working with data that best represents what is going to happen - not what they projected would happen based on last quarter's data. For a discussion in more depth, see my article: Improve Reliability of Financial Forecasts with Integrated Business Planning in Supply & Demand Chain-Executive Magazine.

  Read the article

• Adding a comma to a resource name in Microsoft Project

  - by John Paul Cook

  Microsoft Project does not allow a comma to be added to a resource name. In healthcare, the norm is to refer to people using the pattern of Name, Title which in my case is John Cook, RN. Not all commas are equal. By substituting a different comma for the one Project doesn’t like, it’s possible to add a comma to a resource name. Figure 1. Error message after trying to add a comma to a resource name in Microsoft Project 2013. The error message refers to “the list separator character” that is commonly...(read more)

  Read the article

• Sorting versus hashing

  - by Paul Siegel

  My problem is as follows. I have an array of n strings with m < n of them distinct. I want to create a one-to-one function which assigns each of the m distinct strings to the numbers 0 ... m-1. For example, if my strings are: Bob, Amy, Bob, Charlie, Amy then the function: Bob -> 0, Amy -> 1, Charlie -> 2 would meet my needs. I have thought of three possible approaches: Sort the list of strings, remove duplicates, and construct the function using a search algorithm. Create a hash table and check each string to see if it is already in the table before inserting it. Sort the list of strings, remove duplicates, and put the resulting list into a hash table. My code will be written in Java, and I will likely use standard Java algorithms: merge sort for sorting, binary search for searching, and whatever the standard Java hash table algorithm is. Question: Assume that after creating the function I will have to evaluate it on each of the n original strings. Which of the three approaches is fastest? Is there a better way? Part of the problem is that I don't really know what's going on "under the hood" in standard hashing algorithms. Any help would be appreciated.

  Read the article

• Wammu - USB Device Name?

  - by Paul

  I'm trying to get to my phone's filesystem through USB in Wammu, but I'm stuck in the configuration wizard when it asks for a USB device name. After about an hour of Internet searching, here are the failed solutions I've already tried, starting with the relevant information returned by lsusb in terminal. lsusb Bus 001 Device 003: ID 12d1:101e Huawei Technologies Co., Ltd. So I tried opening Wammu through sudo wammu in terminal and inputting "/dev/bus/usb/001/003" as the device name, which returns: Error opening device Device /dev/bus/usb/001/003 does not exist! and then "/dev/bus/usb/001/", which returns: Failed to connect to phone Description: Error opening device. Unknown, busy, or no permissions.<br> Function: Init<br> Error code: 2 Another proposed solution was to try "tail -f /var/log/messages" in terminal. But that only returned a "No such file or directory" message. Seemingly relevant dmesg info: [ 4739.716214] usb 1-1: new high-speed USB device number 8 using ehci_hcd [ 4739.854137] scsi9 : usb-storage 1-1:1.0 [ 4740.854416] scsi 9:0:0:0: CD-ROM HUAWEI T Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4740.867051] sr0: scsi-1 drive [ 4740.867806] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4740.870464] sr 9:0:0:0: Attached scsi generic sg1 type 5 I don't know why it is coming up as CD-ROM. But there it is. If you haven't noticed already, I'm an absolute beginner when it comes to Linux and terminal. So speaking to me like I'm a three year old is welcome if you can propose a solution. I'm running Ubuntu 12.04 LTS, and the phone is a Huawei U1250. My computer is an Acer Aspire One D250/KAV60. Any help is much appreciated.

  Read the article

• Hands-On Course Requirement: Applicability

  - by Paul Sorensen

  Hi Everyone,Recently there has been some confusion regarding the need for partner-related candidates to meet the hands-on course requirement for tracks that require it. I thought it would be wise to clarify this point on the blog. A recurring question that we have been getting is:Question: Do partner candidates need to meet a hands-on course requirement?Answer: Yes. In order for a person to become certified they must meet the certification requirements for the track that they are pursuing (as listed on the Oracle certification web site). Regardless of candidate type - partner, customer, employee, etc. - all of the certification requirements for a track must be met. Partner-related certification candidates must therefore meet the hands-on course requirement if the track requires it (i.e. they are not exempt from any of the requirements for any given certification).Thanks!QUICK LINKSOracle certification web siteHands-on Course Attendance Requirements

  Read the article

• Your interesting code tricks/ conventions? [closed]

  - by Paul

  What interesting conventions, rules, tricks do you use in your code? Preferably some that are not so popular so that the rest of us would find them as novelties. :) Here's some of mine... Input and output parameters This applies to C++ and other languages that have both references and pointers. This is the convention: input parameters are always passed by value or const reference; output parameters are always passed by pointer. This way I'm able to see at a glance, directly from the function call, what parameters might get modified by the function: Inspiration: Old C code int a = 6, b = 7, sum = 0; calculateSum(a, b, &sum); Ordering of headers My typical source file begins like this (see code below). The reason I put the matching header first is because, in case that header is not self-sufficient (I forgot to include some necessary library, or forgot to forward declare some type or function), a compiler error will occur. // Matching header #include "example.h" // Standard libraries #include <string> ... Setter functions Sometimes I find that I need to set multiple properties of an object all at once (like when I just constructed it and I need to initialize it). To reduce the amount of typing and, in some cases, improve readability, I decided to make my setters chainable: Inspiration: Builder pattern class Employee { public: Employee& name(const std::string& name); Employee& salary(double salary); private: std::string name_; double salary_; }; Employee bob; bob.name("William Smith").salary(500.00); Maybe in this particular case it could have been just as well done in the constructor. But for Real WorldTM applications, classes would have lots more fields that should be set to appropriate values and it becomes unmaintainable to do it in the constructor. So what about you? What personal tips and tricks would you like to share?

  Read the article

• C# String.format extension method

  - by Paul Roe

  With the addtion of Extension methods to C# we've seen a lot of them crop up in our group. One debate revolves around extension methods like this one: public static class StringExt { /// <summary> /// Shortcut for string.Format. /// </summary> /// <param name="str"></param> /// <param name="args"></param> /// <returns></returns> public static string Format(this string str, params object[] args) { if (str == null) return null; return string.Format(str, args); } } Does this extension method break any programming best practices that you can name? Would you use it anyway, if not why? If I renamed the function to "F" but left the xml comments would that be epic fail or just a wonderful savings of keystrokes?

  Read the article

• FrameworkFolders support for WebCenter Portal

  - by Justin Paul-Oracle

  Oracle WebCenter Content Server includes components that provide a hierarchical folder interface, similar to a conventional file system, for organizing and managing some or all of the content in the repository. We used Contribution Folders (folders_g) which is being replaced by the new Folders (FrameworkFolders) component. The newer FrameworkFolders component fixes a number of limitations that folders_g had and adds a ton of new features. If you have played with the WebCenter Content mobile app, you will notice that it uses FrameworkFolders too. WebCenter Portal requires the use of the folders_g component. Given the fact that folders_g and FrameworkFolders component do not go well together and must never be enabled together on any system, you could never use the new features if you planned to use integrate Content with Portal. I still remember presenting a demo with a colleague for a client and he was showing off the mobile capabilities in Portal (which are pretty impressive by the way) and was getting all the glory; while I was sitting back wanting to show off the Content app but could not (no FrameworkFolders). Not any more; Oracle has released bundle patches for both WebCenter Content and Portal in April 2014 which bring home the support for FrameworkFolders. These patches will bring these products to version 11.1.1.8.3. You can enable support for FrameworkFolders on new Content and Portal installations where the folders_g component has never been enabled using the following patches: Download and apply the WebCenter Content MLR03 patch 18088049. Download and apply the WebCenter Portal BP3 patch 18085041. Download and apply the WebCenterConfigure component patch 18387955. Before applying this patch on the Content Server ensure that WebCenter Content MLR03 patch 18088049 has already been applied. You can find detailed instructions on how to enable FrameworkFolders support in the Oracle® Fusion Middleware Installation Guide for Oracle WebCenter Portal 11g Release 1 (11.1.1.8.3). There may be another bundle patches release (version 11.1.1.8.4) for many FMW products (including WebCenter Portal) in July 2014 which could further enhance the FrameworkFolders support.

  Read the article

• 'sudo su -' vs 'sudo -i' vs 'sudo /bin/bash' - when does it matter which is used, or does it matter at all?

  - by Paul

  When I'm doing something that requires root be typed in dozens of times in a row, I prefer to switch my session to a root session. In the various tutorials and instructions I have used on the Internet, I see sudo su, sudo su -, sudo -i and sudo /bin/bash being used to open a root session, but I'm not clear on the difference between these and when or if that difference matters. Can someone clear this up for me?

  Read the article

• Cocos2d sprite's parent not reflecting true scale value

  - by Paul Renton

  I am encountering issues with determining a CCSprite's parent node's scale value. In my game I have a class that extends CCLayer and scales itself based on game triggers. Certain child sprites of this CCLayer have mathematical calculations that become inaccurate once I scale the parent CCLayer. For instance, I have a tank sprite that needs to determine its firing point within the parent node. Whenever I scale the layer and ask the layer for its scale values, they are accurate. However, when I poll the sprites contained within the layer for their parent's scale values, they always appear as one. // From within the sprite CCLOG(@"ChildSprite-> Parent's scale values are scaleX: %f, scaleY: %f", self.parent.scaleX, self.parent.scaleY); // Outputs 1.0,1.0 // From within the layer CCLOG(@"Layer-> ScaleX : %f, ScaleY: %f , SCALE: %f", self.scaleX, self.scaleY, self.scale); // Output is 0.80,0.80 Could anyone explain to me why this is the case? I don't understand why these values are different. Maybe I don't understand the inner design of Cocos2d fully. Any help is appreciated.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >