Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 14/365 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Asus K50I sound issues

    - by MrStatic
    I have an Asus K50IJ (Bestbuy) laptop and have issues with my sound. Speakers themselves work fine but when I plug into the headphone jack it auto mutes the front channel and no sounds comes out of either the speakers or the headphones. If I then unmute the channel I get sound from both the speakers and the headphones. alsamixer shows the Headphone channel as all grayed out. /etc/modprobe.d/alsa-base.conf I have tried snd-hda-intel model="asus-laptop" and snd-hda-intel model="asus" In Sound Preferences I have gone to output and changed the Connector to 'Analog Headphones' that results in no sound from either speakers or headphones. As one forum suggested I tried to comment out blacklist snd_pcsp in the blacklist.conf which resulted in no change. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Santa Cruz Operation Device 1043 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel

    Read the article

  • Booting From VIA VT6421A Based PCI SATA Card

    - by Priyan R
    I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

    Read the article

  • HP Pavilion: Sound problem after Windows Vista SP2 update

    - by Mehper C. Palavuzlar
    I have HP Pavilion dv-2051et notebook with Windows Vista Home Premium SP1. Recently the sound of my notebook completely went off and I poked up Windows sound settings and IDT HD Sound panel to bring it back, but to no avail (trust me, I looked at every setting). Then I made a system restore to the point located just before Vista SP2 was installed. The sounds came back. Afterwards, I installed Vista SP2 again, and the sounds went off again. SP2 installation causes complete loss of sounds of my notebook. What can I do to overcome this problem? I don't want to stay with SP1 but installing SP2 brings me a huge problem. Anyone experienced this lately? Any recommendations? Thanks in advance.

    Read the article

  • Share a USB sound card over a network/bluetooth (Mac & PC)

    - by AlexW
    I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

    Read the article

  • Second video card (PCI) under Windows 7

    - by dbkk101
    I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

    Read the article

  • Bootable SD card still has small memory, even after formating

    - by Inazuma
    I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • Scrolling mouse sets windows sound volume

    - by Ikke
    Suddenly, when I use the scroll wheel of my mouse, it changes the windows sound volume level. I have a HP DV6-2030SD laptop with Windows 7 64 bit and a Zolid p50622 mouse. When I use the scroll function of the mouse pad of the laptop, it does not adjust the sound level. I don't have any special mouse drivers installed, just the standard windows drivers. When I scroll, I see the HP sound level screen: It doesn't do it always, but when it does, it prevents the current window to scroll, which is really annoying. Rebooting doesn't help. I've tried to put the USB dongle in a different port, but this doesn't help either. Any advise on how I can fix this?

    Read the article

  • Strange sound from Laptop, Microphone, Speakers or Soundcard?

    - by David Schilling
    I have recently purchased a second hand computer. There didn't seem to be anything wrong with it on purchasing, however recently I have noticed a small issue. Any time I play sound or listen through my headphones, I can hear what seems to be the CPU working (ie when beginning a new task, there is a small crackling). Also if I tap my laptop I can hear the sound louder, as if it is being picked up by the mic and then playing that sound in real time through the speakers or headphones. I have tried reading other topics but cannot find an answer to this question. These are the specs I am running on; Windows 7 Home Premium 32bit Pentium Dual Core CPU T4300 @ 2.10Ghz 2.10Ghz I hope someone can help me with this issue, it would be much appreciated.

    Read the article

  • video card for only watching videos

    - by Nothing 2 Lose
    I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

    Read the article

  • Enlarge partition on SD card

    - by chenwj
    I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

    Read the article

  • Multiplayer card game using PHP/Ajax and mysql

    - by Alireza Seifi
    I am designing a map game, using PHP and MYSQL. I don't know how to make the players who sign-in to the website to see other players who are also connected to the site and be able to chat with one another. I want to design the game in such a way that 2 players can play with each other and be able to send messages during the game while others groups are playing at the same time. I have designed the map game successfully, but the problem is making the player 1 who log-in to site to see the player 2 who will also log-in and both can get connected to play each other. http://i.stack.imgur.com/YyCPG.png I will appreciate your responses.

    Read the article

  • Access files on Samsung Galaxy S3 external sd card using ubuntu 12.04

    - by nense
    I have a Samsung Galaxy s3 running the stock Samsung ROM and I'm trying to transfer files - videos, photos, music and downloads, from my handset to my system via USB running Ubuntu 12.04. I have followed to links suggested How to connect Samsung Galaxy S3 via USB? But it all goes over my head. Can anyone help me with a simple GUI program or a link so I can simply copy and paste selected files from my phone onto my system?

    Read the article

  • Running PCIE card with the on board video card as well in Windows 7

    - by Russ Johnson
    I have an emachines Windows7 PC. I am trying to run the on board video card along with the dual DVI card I installed in the PCIE slot. In CMOS it shows the on board card as disabled and it will not let me enable it? Its greyed out so I cant even highlight it to change anything. I have done this before in XP on a few different machines so I know its possible, Any idea?

    Read the article

  • Re-enabling audio on an iMac

    - by Warren Seine
    Hello guys, I know Super User is not a 'tech support' forum, so I will try to make it short: my computer's sound does not work anymore. I have asked for support on the Apple board but I feel a bit on my own. To summarize, the Sound Panel of my iMac does not display any outgoing channel (headphones or internal speakers). It does not work on Windows either. Contrary to what it may seem, I have the feeling that it is not a hardware issue (and that GarageBand is somehow interfering). If you have an idea to solve the problem, please share. Making it work again is a lost cause without sending it back to Apple, so the question I'm asking is: What is the best workaround (cheap Firewire sound card?) for getting my sound back? Thanks.

    Read the article

  • Upscaling audio from 2.1 to 5.1 in Windows 7

    - by Darth Android
    I'm currently using the onboard sound on my Asus P6T6 WS Revolution motherboard (SoundMAX Integrated Digital Audio) and was wondering if there was any way to make either windows or the audio drivers upscale 2-channel audio to 5-channel audio (basic duplication would suffice)? I was using a creative sound card but got fed up with the memory leaks and poor sound quality.

    Read the article

  • SD Card reader not working on Sony Vaio

    - by TessellatingHeckler
    This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

    Read the article

  • How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

    - by sbwoodside
    I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

    Read the article

  • Computer won't start after installing new video card

    - by Vercas
    So, 1 year and 340 days ago I bought a desktop computer. Since then, it has served me well. But lately, I wanted an upgrade, so I bought a new video card. I documented myself about the compatibility, and it is okay. So I opened the case, cleaned up that... dust elemental living inside of it. Unscrewed the plastic thingie on the outside to unscrew the old video card. Because of the stupid arrangement of the ports, I had to unscrew the motherboard to unplug it. So I unscrewed it, removed the old card, put in the new one, moved the motherboard back, screwed it back in, screwed the video card on the holder... thingie, and screwed the plastic thingie back in. Everything went smoothly, nothing had to be forced in/out. I connected the external power supply, closed the computer case, put the tower back in it's place and all the cables back in. When I pressed the power button, the LED turned... some color I can't distinguish. It stayed that way for a second, and then it went off. I tried a bunch of things, including permuting the external power supply arrangement (1 connection, 2 connections and no connections), with no success. And here are some of the specifications: Motherboard manufacturer: Asrock Processor: AMD Athlon II X2 3.0 GHz RAM: 2 x 2GB (had only 1 initially, bought the second plate a bit later) OLD video card: AMD Radeon HD 5450 NEW video card: Gigabyte nVidia GeForce GTX 650 GPU, 1GB GDDR5 128bit PCI-E, Dual-link DVI-Dx2 / HDMI / D-Sub Power supply: 450W + all the requirements I managed to find on the internet are met (+12V 18A or something) More specific information is stored... On that computer. If required, I may open the case again and read the stickers to find more specific information. I can also provide photos if necessary. Any ideas? Suggestions? Something? :|

    Read the article

  • Stream internal sound from mac to pc?

    - by Shedo Surashu
    I'm using a headphone connected to a PC, however, I also use a mac. I want to make it so that the internal sound, coming from the mac will also be heard over at the pc. So I want to convert the headphone to a somewhat central sound output where I hear both pc and mac's internal sounds. That includes error alerts, mp3s played on iTunes, etc. Is there an app that will let me do this? Just to clarify, the PC is running Windows XP.

    Read the article

  • Any game kills my sound

    - by LoopyWolf
    Every time I quit a game such as Braid, Fallout3, AVP all sound on the PC dies (Control Panel No Audio Devices) I installed a new sound card (SB Audigy) and updated to the latest drivers, and it still happens. It happens with steam games and without. Anybody know what's wrong and how I can fix it? I'm on Win XP SP 2

    Read the article

  • Using Sigmatel STAC 92XX on Windows 7 RTM x64, cannot get 5.1 surround sound to work

    - by Roy Rico
    I have a Dell XPS 420. I've installed Windows 7 RTM (x64) I have this audio device: SIGMATEL STAC 92XX C-Major HD Audio I have tried using the windows 7 basic driver, and also the Vista 64-bit driver from Dell's website (details): Date: 10/29/2007 Version: 6.10.0.5511, A04 File Size: 7 MB With both drivers, I get normal stereo sound from the driver, but my 5.1 surround sound doesn't work. Has anyone experienced this? Is there a fix?

    Read the article

  • Set default input/output sound

    - by Nathan Koop
    I have a mac that is hooked into a sound board, I have external sound card that interfaces between the computer and the soundboard, this works great. However, whenever the computer restarts it sets the input & output to the 'internal microphone' and the 'built in output'. I'd like to default to the other soundcard. How can I do this? I'm running OS 10.6.3

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >