Search Results

Search found 699 results on 28 pages for 'stephen ashley'.

Page 14/28 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Cannot Access Web Interface on HP 2510G

  - by Stephen

  I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

  Read the article

• eSATA hotswap using Jmicron JMB363 controller

  - by Stephen

  I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

  Read the article

• Silverlight Cream for December 16, 2010 -- #1011

  - by Dave Campbell

  In this Issue: John Papa, Tim Heuer, Jeff Blankenburg(-2-, -3-), Jesse Liberty, Jay Kimble, Wei-Meng Lee, Paul Sheriff, Mike Snow(-2-, -3-), Samuel Jack, James Ashley, and Peter Kuhn. Above the Fold: Silverlight: "Animation Texture Creator" Peter Kuhn WP7: "dows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger" Jesse Liberty Shoutouts: Awesome blog post by Jesse Liberty about writing in general: Ten Requirements For Tutorials, Videos, Demos and White Papers That Don’t Suck From SilverlightCream.com: 1000 Silverlight Cream Posts and Counting! John Papa has Silverlight TV number 55 up and it's an inverview he did with me the day before the Firestarter in December... thanks John... great job in making me not look stooopid :) Silverlight service release today - 4.0.51204 Tim Heuer announced a service release of Silverlight ... check out his blog for the updates and near the bottom is a link to the developer runtime. What I Learned In WP7 – Issue #3 Jeff Blankenburg has been pushing out tips ... number 3 consisted of 3 good pieces of info for WP7 devs including more info about fonts and a good site for free audio files What I Learned In WP7 – Issue #4 In number 4, Jeff Blankenburg talks about where to get some nice free WP7 icons, and a link to a cool article on getting all sorts of device info What I Learned In WP7 – Issue #5 Number 5 finds Jeff Blankenburg giving up the XAP for a CodeMash sessiondata app... or wait for it to appear in the Marketplace next week. Windows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger Wow... Jesse Liberty is up to number 13 in his Windows Phone from scratch series... this time it's part 2 of his Custom Behaviors post, and ActionTriggers specifically. Solving the Storage Problem in WP7 (for CF Developers) Jay Kimble has released his WP7 dropbox client to the wild ... this is cool for loading files at run-time... opens up some ideas for me at least. Building Location Service Apps in Windows Phone 7 Wei-Meng Lee has a big informative post on location services in WP7... getting a Bing Maps API key, getting the data, navigating and manipulating the map, adding pushpins... good stuff Using Xml Files on Windows Phone Paul Sheriff is discussing XML files as a database for your WP7 apps via LINQ to XML. Sample code included. ABC–Win7 App Mike Snow has been busy with Tips of the Day ... he published a children's app for tracing their ABC's and discusses some of the code bits involved. Win7 Mobile Application Bar – AG_E_PARSER_BAD_PROPERTY_VALUE Mike Snow's next post is about the infamous AG_E_PARSER_BAD_PROPERTY_VALUE error or worse in WP7 ... how he got it, and how he fixed it... could save you some hair... Forward Navigation on the Windows Phone Mike Snow's latest post is about forward navigation on the WP7 ... oh wait... there isn't any... check out the post. Day 2 of my “3 days to Build a Windows Phone 7 Game” challenge Samuel Jack details about 9 hours in day 2 of his quest to build an XNA app for WP7 from a cold start. Windows Phone 7 Side Loading James Ashley has a really complete write-up on side-loading apps onto your WP7 device. Don't get excited... this isn't a hack... this is instructions for side-loading using the Microsoft-approved methos, which means a registered device. Animation Texture Creator Remember Peter Kuhn's post the other day about an Animation Texture Creator? ... well today he has some added tweaks and the source code! ... thanks Peter! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How can I use the Homebrew Python with Homebrew MacVim on Mountain Lion?

  - by Stephen Jennings

  I originally asked and answered this question: How can I use the Homebrew Python version with Homebrew MacVim? These instructions worked on Snow Leopard using Xcode 4.0.1 and associated developer tools. However, they no longer seem to work on Mountain Lion with Xcode 4.4.1. My goal is to leave the system's version of Python completely untouched, and to only install PyPI packages into Homebrew's site-packages directory. I want to use the vim_bridge package in MacVim, so I need to compile MacVim against the Homebrew version of Python. I've edited the MacVim formula to add these to the arguments: --enable-pythoninterp=dynamic --with-python-config-dir=/usr/local/Cellar/python/2.7.3/Frameworks/Python.framework/Versions/Current/lib/python2.7/config Then I install with the command: brew install macvim --override-system-vim --custom-icons --with-cscope --with-lua However, it still seems to be somehow using Python 2.7.2 from the system. This seems strange to me because it also seems to be using the correct executable. :python print(sys.version) 2.7.2 (default, Jun 20 2012, 16:23:33) [GCC 4.2.1 Compatible Apple Clang 4.0 (tags/Apple/clang-418.0.60)] :python print(sys.executable) /usr/local/bin/python $ /usr/local/bin/python --version Python 2.7.3 $ /usr/local/bin/python -c "import sys; print(sys.version)" 2.7.3 (default, Aug 12 2012, 21:17:22) [GCC 4.2.1 Compatible Apple Clang 4.0 ((tags/Apple/clang-421.0.60))] $ readlink /usr/local/lib/python2.7/config /usr/local/Cellar/python/2.7.3/Frameworks/Python.framework/Versions/Current/lib/python2.7/config I've removed everything in /usr/local and reinstalled Homebrew by running these commands: $ ruby <(curl -fsSkL raw.github.com/mxcl/homebrew/go) $ brew install git mercurial python ruby $ brew install macvim (nope, still broken) $ brew remove macvim $ ln -s /usr/local/Cellar/python/..../python2.7/config /usr/local/lib/python2.7/config $ brew install macvim

  Read the article

• How can I edit local security policy from a batch file?

  - by Stephen Jennings

  I am trying to write a utility as a batch file that, among other things, adds a user to the "Deny logon locally" local security policy. This batch file will be used on hundreds of independent computers (not on a domain and aren't even on the same network). I assumed one of the following were my options, but perhaps there's one I haven't thought of. A command line utility similar to net.exe which can modify local security policy. A VBScript sample to do the same. Write my own using some WMI or Win32 calls. I'd rather not do this one if I don't have to.

  Read the article

• "TCP Sweep" - What is it? How am I causing it?

  - by Stephen Melrose

  Hi there, I've just had an email from my hosting company telling me I'm in violation of their Acceptable Use Policy. They forwarded me an email from another company complaining about something to do with a "TCP sweep of port 22". They included a snippet from their logs, 20:29:43 <MY_SERVER_IP> 0.0.0.0 [TCP-SWEEP] (total=325,dp=22,min=212.1.191.0,max=212.1.191.255,Mar21-20:26:34,Mar21-20:26:34) (USI-amsxaid01) Now, my server knowledge is limited at best, and I've absolutely no idea what this is or what could be causing it. Any help would be greatly appreciated! Thank you

  Read the article

• Terminal OS X Error when using Python

  - by Stephen

  Hey, I'm trying to learn how to program so I've installed the latest version of Python and I've been following the Byte of Python tutorial. I'm using Textwrangler I've only gotten as far as the simple "Hello World" intro and I'm already having a problem. I type out the code (just without the ""): "#!/usr/bin/python" "#Filename: helloworld.py" "print('Hello World')" and save it to my desktop as helloworld.py. I then go into terminal and type "python3 helloworld.py" and I get the following error message: /Library/Frameworks/Python.framework/Versions/3.1/Resources/Python.app/Contents/MacOS/Python: can't open file 'helloworld.py': [Errno 2] No such file or directory I was hoping someone could tell me what I'm doing wrong. If I choose to run the script from Textwrangler it operates just fine however I'm not able to access it from the Terminal. Thanks so much!

  Read the article

• Setting properties in chef-client.rb

  - by Stephen C

  I have a use-case where a chef recipe needs to use 'remote_file' to fetch a file on a virtual, and the fetch needs to be do through an HTTP proxy. This is not working because chef-client doesn't use the system proxy settings ... it gets its proxy settings from the /etc/chef/chef-client.rb So how do I get proxy settings (or settings in general) into the chef-client.rb file on a client? Ideally, I'd like it to happen at client bootstrap time, but I can't see how to do that short of hacking the code. The other possibility is that I could create a recipe that updates the chef-client.rb file. But that strikes me as a bit dangerous. And it means that you need to run chef-client twice before it works, assuming that the missing proxy setting in the first run causes the run to ultimately fail. Any ideas on how to fix this?

  Read the article

• Web authentication using LDAP and Apache?

  - by Stephen R

  I am working on a project of setting up a web administered inventory database for my work (or if they don't want it then i'll enjoy learning about it) and hit the problem of allowing only authorized users to access the website (In its testing/development phase, I allow all people to navigate to the website to add entries to the database and query it). I am trying to make it so only particular users in the domain (Active Directory) are allowed to access the website after they are queried about their credentials. I read that Apache (I am using a LAMP server) has a means of asking visitors to the website to provide LDAP credentials in order to gain access to the site, but I wasn't sure if that was exactly what I was looking for. If anyone has experience in the LDAP configurations for Apache that I mentioned or any other means of securely authenticating with websites I would greatly appreciate advice or a direction to go Thank you!

  Read the article

• Silverlight Cream for December 12, 2010 - 2 -- #1009

  - by Dave Campbell

  In this Issue: Michael Crump, Jesse Liberty, Shawn Wildermuth, Domagoj Pavlešic, Peter Kuhn, James Ashley, Sara Summers, Morten Nielsen, Peter Torr, and Tau Sick. Above the Fold: Silverlight: "Silverlight 4 – Coded UI Framework Video Tutorial" Michael Crump WP7: "Windows Phone From Scratch #12–Custom Behaviors (Part I)" Jesse Liberty From SilverlightCream.com: Silverlight 4 – Coded UI Framework Video Tutorial Michael Crump posted a video tutorial today on the Coded UI Test Framework that we got with the VS2010 Feature Pack 2. Wanna create automated tests? ... check out Michael's video and save yourself some time. Windows Phone From Scratch #12–Custom Behaviors (Part I) Jesse Liberty posted his Windows Phone from Scratch number 12 today... and it's on Custom Behaviors... cool stuff... need to read this and get your head around it... this is part 1, jump on it before he drops part 2 on us! The Next Application Platform? All of them... Shawn Wildermuth has a thought-provoking post up ... check it out and see if you're ready to join him on the adventure of building for all the platforms... Windows Phone 7 Accelerometer Test App Domagoj Pavlešic has a test app up for the accelerometer on the WP7 ... if you need to use it, and are having problems, a good example always helps me. Protocol of developing an animation texture tool Peter Kuhn found a need for a tool to creat some animations for an WP7 XNA game... so he challenged himself to write it, and detailed out all his steps as he went. Re-examining WP7 Launchers and Choosers James Ashley's most recent post is on the Pivot Control ... check this out... add a working Horizontally oriented slider to a pivot... plus some external links to help out New Prototyping Sketch Sheets for WP7 This is one of those posts that I had to go to SilverlightCream and make sure I hadn't hit it yet... pretty cool prototype sheets for WP7 by Sara Summers ... we've seen others, they're all good. Simulating GPS on Windows Phone 7 Morten Nielsen helps you get around the fact that you're not going to be able to use the emulator for testing your GPS app ... at least not without some assistance... and that doesn't mean hauling your dev system around your neighborhood, either. How to correctly handle application deactivation and reactivation We've seen posts on Tombstoning, but probably not from Silverlight team members... check this one out from Peter Torr ... great even sequence information and all the info on how to correctly handle it, plus external links to the documentation... you knew there was documentation, right? :) Localizing a Windows Phone 7 Application Tau Sick has a post up discussing Localization and your WP7 apps... coming from soneone with an app in the marketplace in 3 languages, it's a pretty good bet he's got it figured out! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Where can I find a useful multi-language Unicode font for Mac OS X?

  - by Stephen Jennings

  On every browser I've tried (Firefox, Safari, Chrome, and Omniweb), when I go to a web page containing somewhat less-common characters, I can't see the glyphs. For example, on the Wikipedia page for the Bengali Language, the very first line contains a string of squares; on Windows, I can see the Bengali writing. Firefox does display code points on the Coptic Language article, but not Bengali. I'm not sure why. On Windows, as long as I have the Arial Unicode MS font installed, these characters fall back to that font and display properly. Mac OS X doesn't seem to ship with a font containing these Unicode characters (it has Arial Unicode MS, but it must be a subset of the Windows version because Bengali doesn't display in that font). I checked on my Snow Leopard DVD and I installed "Additional Fonts" from the Optional Installs package, but I'm still missing many languages. Is there any good, free font that contains a large collection of languages? I know creating fonts is difficult and time-consuming, but it seems like including at least one font like this with operating systems should be standard by now.

  Read the article

• Print spooler consumes over 1GB of memory

  - by Stephen Jennings

  Suddenly, on a Windows Vista Business workstation I manage, the Windows print spooler service is consuming over 1GB of memory. I got the call this morning that the user could not print. I discovered all printers were missing from the Printers applet in Control Panel. I rebooted the machine, and at first the printers were still missing, but after a few minutes (and much banging my head against the wall) they suddenly appeared. I stopped worrying about it until later today it happened again to the same workstation. To my knowledge, nothing has changed on the computer. No new printers have been added, no new print drivers would have been installed, and no new software is being used. I tried clearing out the spooler folder (C:\Windows\System32\spooler\printers) which did have four print jobs from this morning, but the problem persists after restarting the spooler service. When starting the service, it starts out using 824 KB of memory, then after about 20 seconds it starts creeping up about 10MB each second until it stabilizes around 1.8GB.

  Read the article

• Norton Security Suite Symantec Download Manager Error: "Error writing to disk"

  - by Stephen Pace

  My broadband provider (Comcast) decided to switch their 'included with service' security suite from McAfee to Norton Security Suite. Their email directed me to a site that downloaded the Symantec Download Manager (NortonDL.exe) and that went fine. I'm running Windows 7 32-bit and running this application pops up the standard User Account Control message and the software is correctly identified as coming from Symantec. I answer 'yes' to allow the software to install and upon launch immediately get an "Error writing to disk" error. I searched the Internet for this error, but mainly I find Comcast users complaining about the same issue with no resolution other than to call Symantec. I found no one suggesting a successful workaround and it appeared that most of the support calls took up to three hours. I'd like to avoid that if possible. Ideas? To be honest, I'm getting close to bagging this installation and just moving to Microsoft Security Essentials.

  Read the article

• Use a webpage as a screen saver

  - by Stephen

  We have a number of retail stores that sell laptops. There are a number of display models on show in each retail store. At the moment screen savers are used to promote different offers and these screen savers are out of date. What I would like to do is open up a browser on these machines and just use a webpage. This way I can control exactly what is displayed and keep it up to date with our latest offers. Is it possible to have the webpage in full screen mode, with no address bar or tabs visible. As far as I'm aware these are Windows machines, probably running Windows Vista or Windows 7. Any help appreciated.

  Read the article

• Where did this incorrect cached DNS lookup come from?

  - by Stephen Jennings

  Somehow, I've been having a chronic issue where my computer will get an invalid DNS lookup in its cache for either of the two Exchange servers I use from Mail.app. My workplace runs one of the Exchange servers and I run the other (they are totally unrelated, hosted by different companies, etc.). The problem manifests as a certificate domain error. When it happens, I can run nslookup mail.mydomain.com and I see the incorrect IP address (usually owned by either Apple or Akamai), but if I run nslookup mail.mydomain.com 8.8.8.8, I get the correct address. My real quest is to find out why this keeps happening, and to do that, I'd like to know which server is supplying me this bad DNS entry. Is there a way to check my DNS cache to see where this bad lookup came from?

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• unique .htaccess question about mod_rewrite and RewriteCond

  - by Stephen

  I have a few rewrite rules like these RewriteRule ^dir/(.*)-something.html otherdir/file1.php?var1=val&var2=$1 [L,NC] RewriteRule ^dir/ otherdir/file2.php?var1=val [L,NC] dir/ is not a real directory. Everything above works as expected. However, the user is able to type anything like mysite.com/dir/asdfasdfasdfsdf And they are still redirected to file2.php. If the user types in just garbage I'd like to serve a 404 instead. I'm guessing I need a RewiteCond that will test for blank space after the slash and only then serve file2.php, but I'm unsure how to write it.

  Read the article

• How to restore PostgreSQL database from .tar file?

  - by Stephen

  I have all PostgreSQL databases backed up during incremental backups using WHM, which creates a $dbName.tar file. Data is stored in these .tar files, but I do not know how to restore it back into the individual databases via SSH. In particular the file location. I have been using: pg_restore -d client03 /backup/cpbackup/daily/client03/psql/client03.tar which generates the error 'could not open input file: Permission denied' Any assistance appreciated.

  Read the article

• Silverlight Cream for February 06, 2011 -- #1042

  - by Dave Campbell

  In this Issue: Mike Taulty, Timmy Kokke, Laurent Bugnion, Arik Poznanski, Deyan Ginev, Deborah Kurata(-2-), Johnny Tordgeman, Roy Dallal, Jaime Rodriguez, Samuel Jack(-2-), James Ashley. Above the Fold: Silverlight: "Customizing Silverlight properties for Visual Designers" Timmy Kokke WP7: "Back button press when using webbrowser control in WP7" Jaime Rodriguez Expression Blend: "Blend Bits 21–Importing from Photoshop & Illustrator…" Mike Taulty From SilverlightCream.com: Blend Bits 21–Importing from Photoshop & Illustrator… Mike Taulty is up to 21 episodes on his Blend Bits sequence now, and this one is about using Blend's import capability, such as a .psd file with all the layers intact. Customizing Silverlight properties for Visual Designers Timmy Kokke has part 1 of 2 parts on making your Silverlight control properties in design surfaces such as Visual Studio designer or Expression Blend. An error when installing MVVM Light templates for VS10 Express Laurent Bugnion has released a new version of MVVMLight that resolves a problem with VS2010 Express version of the templates... no problem with anything else. Reading RSS items on Windows Phone 7 Arik Poznanski has a post up about reading RSS on a WP7, but better yet, he also has code for a helper class that you can grab, plus explanation of wiring it up. Integrating your Windows Phone unit tests with MSBuild #4: The WP7 Unit Test Application Deyan Ginev has a post up about Telerik's WP7 test app that outputs test results in XML from the emulator so they can be integrated with the MSBuild log. Accessing Data in a Silverlight Application: EF I apprently missed this post by Deborah Kurata last week on bringing data into your Silverlight app via Entity Frameworks... good detailed tutorial in VB and C#. Updating Data in a Silverlight Application: EF In Deborah Kurata's latest post, she is continuing with Entity Frameworks by demonstrating updating to the database... full source code will be produced in a later post. Fun with Silverlight and SharePoint 2010 Ribbon Control - Part 2 - An In Depth Look At The Ribbon Control Johnny Tordgeman has Part 2 of his Silverlight and Sharepoint 2010 Ribbon up... taking a deep-dive into the ribbon... great explanation of the attributes, code included. Geographic Coordinates Systems Roy Dallal has some Geo code up that's not necessarily Silverlight, but very cool if you're doing any GIS programming... ya gotta know the coordinate systems! Back button press when using webbrowser control in WP7 Jaime Rodriguez has a post up discussing the much-lamented back-button action in the certification requirements and how to deal with that in a web browser app. Multiplayer-enabling my Windows Phone 7 game: Day 1 Samuel Jack challenged himself to build a WP7 game in 3 days... now he's challenging himself to make it multiplayer in 3 days... this first hour-to-hour post is research of networking and an azure server-side solution. Multiplayer-enabling my Windows Phone 7 game: Day 2–Building a UI with XPF Day 2 for Samuel Jack getting the multiplayer portion of his game working in 3 days.. this day involves getting up-to-speed with XPF. How to Hotwire your WP7 Phone Battery Did you realize if you run your WP7 battery completely down that you can't charge it? James Ashley reports that circumstance, and how he resolved it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How to increase the maximum number of participants in Office Communicator conference

  - by Stephen Jennings

  We often want to make quick announcements to our group of 20 people using Office Communicator, so we highlight a group of contacts and start a new IM session. However, only a maximum of 10 people are able to join the conversation; after the maximum number of people join, all other invitees get the message: Cannot connect to the conference because it is full. Contact the conference leader for more information. Is there a way to increase the maximum number of participants?

  Read the article

• Is there an IE8 setting or policy to make it work like IE7 with respect to persistent connections?

  - by Stephen Pace

  I am working with a commercial application running on XP using IIS 5.1. Periodically the application is returning an IIS error "There are too many people accessing the Web site at this time." This is caused by Microsoft artificially limiting the number of connections (10) under IIS 5.1 under Windows XP, but in this case, there is really only one user (albeit a few tabs open at a time). Microsoft suggests you can reduce the problem by turning off HTTP Keep-Alives for that particular web site: http://support.microsoft.com/kb/262635 If you use IIS 5.0 on Windows 2000 Professional or IIS 5.1 on Microsoft Windows XP Professional, disable HTTP keep-alives in the properties of the Web site. When you do this, a limit of 10 concurrent connections still exists, but IIS does not maintain connections for inactive users. I may do that; however, I'm worried about performance degradation. However, I also notice that IE8 appears to handle this differently than IE7. By default, IE6 and IE7 use 2 persistent connections while IE8 uses 6. Perhaps in this case IE8 itself is generating multiple connections in an attempt to be faster, but those additional connections are overwhelming the artificially limited IIS 5.1 on XP? Assuming that is the case, is there an Internet Explorer option, registry setting, or policy I can set to force IE8 to behave like IE7 with respect to persistent connections? I would not set this for all users, but for the small number of users that used this application, it might solve their intermittent problem until the application can be rehosted on Windows Server 2008. Thanks.

  Read the article

• Network connectivity logs on OSX

  - by Stephen

  I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

  Read the article

• Optimising bare-metal hypervisor installation

  - by Stephen

  what is the best way to install a bare metal hypervisor (i.e. to host multiple VM's)? I spoke to a friend and he is using a HP server to host all his VMs with VMware ESXi, but he installed the VMWARE esxi software on a flash card. He can then use his full hard disk capacity from each drive for the VMs. Is this a pretty standard setup when configuring a bare-metal hypervisor? How do you guys do it, and what is best?

  Read the article

• External USB HD with -optional- mains?

  - by Stephen

  Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

  Read the article

• Looking for tex to html converter

  - by Stephen

  I need to convert a very large latex project (made up of many .tex and style files) into .html (or something similarly non-.pdf). Can someone recommend a quality converter program? Preferably, one that is: available on linux (specifically Ubuntu) actively maintained Thanks!

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >