Search Results

Search found 13576 results on 544 pages for 'mobile dev'.

Page 140/544 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

  • can ping, but not SSH

    - by Matt
    So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

    Read the article

  • /tmp shows 690 Mb full, actual size 72 K, Why?

    - by Ankit
    Why is /tmp diretory on my system showing 690 Mb full, whereas du -sh /tmp shows only 72K full. drwxrwxrwt 2 lightdm lightdm 4096 Aug 29 21:49 at-spi2 drwx------ 2 ankit ankit 4096 Aug 29 21:50 keyring-0JTfoY drwx------ 2 ankit ankit 4096 Aug 29 21:44 keyring-rChLLL drwx------ 2 root root 16384 Jul 22 02:10 lost+found drwx------ 2 ankit ankit 4096 Jan 1 1970 orbit-ankit drwx------ 2 lightdm lightdm 4096 Aug 29 21:50 pulse-2L9K88eMlGn7 drwx------ 2 root root 4096 Aug 29 21:44 pulse-PKdhtXMmr18n drwx------ 2 ankit ankit 4096 Aug 29 21:50 pulse-zR1TZUAZfmQW drwx------ 2 ankit ankit 4096 Aug 29 21:44 ssh-dlslOXOq2203 drwx------ 2 ankit ankit 4096 Aug 29 21:50 ssh-MrQQVRyy3316 -rw------- 1 ankit ankit 0 Aug 29 21:45 tmp0qnNG4 -rw------- 1 ankit ankit 0 Aug 29 21:50 tmpVvSMt6 -rw------- 1 ankit ankit 0 Aug 29 21:49 tmpy9Gadz -rw-rw-r-- 1 lightdm lightdm 0 Aug 29 21:44 unity_support_test.0 ankit@duster:/tmp$ df -h df: `/home/ankit/.gvfs': Transport endpoint is not connected Filesystem Size Used Avail Use% Mounted on /dev/sda1 79G 11G 65G 14% / udev 2.9G 4.0K 2.9G 1% /dev tmpfs 1.2G 868K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 220K 2.9G 1% /run/shm /dev/sda7 38G 690M 35G 2% /tmp /dev/sda5 93G 26G 63G 30% /home /dev/sda6 93G 1.6G 87G 2% /boot /dev/sda3 154G 69G 78G 48% /home/mount_150 ankit@duster:/tmp$ ankit@duster:/tmp$ ankit@duster:/tmp$ sudo du -sh /tmp/ 72K

    Read the article

  • Show USB drives in launcher, but not mounted internal partitions

    - by Gabriel
    Well the title pretty much says it all. I have partitions that appear in the launcher when the system mounts them, just like when a USB key is plugged in. I do not want these mounted internal hard disc partitions to show as icons in the launcher, but I do want my external USB to show there when I plug it in. I've tried MyUnity - it has only an option to not show/hide all mounted devices, which is not what I want. Can this be done? From /proc/mounts (in order seen in screenshot): /dev/sdb1 /media/CEDD-DE31 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro 0 0 /dev/sda3 /media/A423-E0E8 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro 0 0 /dev/sda5 /media/586C25656C253EDE fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sda6 /home/greg/80gb ext4 rw,relatime,user_xattr,barrier=1,data=ordered 0 0 Other items from /proc/mounts not appearing in Unity launcher: /dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0 /dev/sda9 /mnt/backup ext4 rw,relatime,user_xattr,barrier=1,data=ordered 0 0

    Read the article

  • Galaxy Note II MTP on Ubuntu 12.04

    - by Anass Ahmed
    I bought a branding new Galaxy Note II and I tried to mount its storage to my ubuntu laptop. As you know, Android 4.0+ uses MTP by default. Android 4.1 doesn't support USB Mass Storage anymore! So I have to use MTP to open my files via USB. I followed this article to get it work. It worked only for External Memory Card. but the internal cannot be reached! $mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /media/Islamics type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda8 on /media/Technology type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda7 on /media/Misc type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/anass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=anass) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev) mtpfs on /media/GalaxyNote2 type fuse.mtpfs (rw,nosuid,nodev,allow_other,user=anass)

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • Where to install boot loader on a Zenbook Prime?

    - by Christians
    I cannot figure out where to install the boot loader on my Zenbook UX31A Prime. I have installed Ubuntu many times on normal hard drives, but this is the first SSD and I am struggling. Installed Ubuntu 12.04 64-bit selecting "UEFI: general" boot entry. Installation type: Something Else Created partition /sda5 mount as /, /sda6 mount as /home, /sda7 mount as swap Selected /dev/sda for boot loader installation. Other options are /dev/sda, /dev/sda1/dev/sda3 Windows 7 (loader) ... Grub comes up with 6 entries Ubuntu - this runs great Linux 3.2.0-29-generic recovery mode: mode hangs with "fb: conflicting fb hw usae interdrnfb vs EFI VGA - removing generic adapter" memtest86:erro: unknown command `linux 16' memtest86 serial: unknown command `linux 16' Windows 7 (loader) (on /dev/sda3): invalid EFI file path Windows Recovery Environment (on /dev/sda8): unknown command drivemap, invalid EFI file path. My workaround for booting Windows 7 is hitting ESC during boot, windows boot manager comes up and * for booting into Windows 7 I select "WIndows Boot Manager (PO: SanDisk ....". * for booting into Ubuntu I select ubuntu (P0: SanDisk...) How can I boot into Windows from Grub?

    Read the article

  • Some info about SD card patitions after the use of the dd statment and some oiters doubts?

    - by AndreaNobili
    I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

    Read the article

  • SD card won't appear after upgrade to 13.10

    - by Pixel
    My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

    Read the article

  • Unsure about TRIM enabled on my SSD

    - by user84750
    I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • Partition does not start on physical sector boundary?

    - by jasmines
    I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

    Read the article

  • Importing an existing project into Git

    - by Andy
    Background During the course of developing our site (ASP.NET), we discovered that our existing source control (SourceGear Vault) wasn't working for us. So, we decided to migrate to Git. The translation has been less than smooth though. Our site is broken up into three environments DEV, QA, and PROD. For tho most part, DEV and the source control repo have been in sync with each other. There is one branch in the repo, if a page was going to be moved up to QA then the file was moved manually, same thing with stuff that was ready for PROD. So, our current QA and PROD environments do not correspond to any particular commit in the master branch. Clarification: The QA and PROD branches are not currently, nor have they ever been in source control. The Question How do I move QA and PROD into Git? Should I forget about the history we've maintained up to this point and start over with a new repo? I could start with everything on PROD, then make a branch and pull in everything from QA, and then make another branch off of that with DEV. That way not only will the branches reflect the differences in the environments, they'll be in the right order chronologically with the newest commits in the DEV branch. What I've tried so far I thought about creating a QA branch off of the current master and using robocopy to make the working folder look like the current QA environment. This doesn't work because the new commit from QA will remove new files from DEV and that will remove them when we merge up, I suspect there will be similar problems if I started QA at an earlier (though not exact) commit from DEV.

    Read the article

  • Doesn't work Nginx + SSI [migrated]

    - by boopidoopi
    I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

    Read the article

  • Windows partition UNKNOWN after Ubuntu installation attempt at dual boot - How to fix?

    - by user285645
    The idea was to install Win 7 and Ubuntu with dual boot. However, after installation, Gparted shows a /dev/sda1 as an 'unknown' filesystem and its size is 278 GB. All my windows files, data are in this partition. THen, there's /dev/sda2 with 'EXT4' filesystem (size-9.54 GB) - created during Ubuntu install. Then, there's /dev/sda3 with 'extended' filesystem (size- 10.5 GB) - created during Ubuntu install. Then, there's /dev/sda5 with 'linux swap' filesystem (size- 2 GB) - created during Ubuntu install. Then, there's /dev/sda6 with 'ext4' filesystem (size- 8.5 GB) - created during Ubuntu install. MY questions are: What exactly does this Gparted output above mean? How to recover my previous Windows 7 installation that's in /dev/sda1 (NTFS). I have some important files I need. Also, I had a PGP encryption on the disk before installing Ubuntu. Now, it just boots straight into Ubuntu... why? How to uninstall Ubuntu (the Try ubuntu and uninstall did not work. the boot-repair did not work) I have read other topics but noone has provided a proper step by step answer to how to recover my 278GB WIndows partition. The testdisk step by step procedure did not work. It says the NTFS disk is unrecognized.

    Read the article

  • Librated error when creating partition table

    - by Marko
    I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • How to set individual NTFS partitions permissions behaviour for each user account?

    - by ryniek
    I have two NTFS partitions (DOWNLOADS for downloaded files and VM for my VirtualBox .vdi file) for which i must have full permissions for my allday use account. They should be also automounting when i login to this account. But i've also set Guest account for guests. For Guest account, i want make VM partition fully disabled and invisible (and thus it mustn't automount) but DOWNLOADS partition should be shared with limited privileges with Guest account. Editing fstab i'm able to share DOWNLOADS partition with Guest on limited privileges but VM can be only set to limited and have disabled automounting - so guest can't mount it but it still can be seen in Nautilus, plus I must always mount it manually when i login to allday account. Is there some trick to make what i want? Here's my fstab config: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=35e66658-5ee9-40cf-bf56-8204959e3df0 / xfs defaults 01 #Entry for /dev/sda2 : UUID=26c714cf-4236-45e7-9c46-cfcf91a215ae /home xfs defaults 02 #Entry for /dev/sda5 : UUID=1315BCB027C44639 /media/DOWNLOADS ntfs-3g auto,uid=1000,gid=1000,umask=0022,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda6 : UUID=60FF39EB72B72264 /media/VM ntfs noauto,uid=1000,gid=1000,umask=0077,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda7 : UUID=c52411f5-105c-45d1-971f-412f962c350e none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks

    Read the article

  • Unable to mount location ubuntu 12.10

    - by Rajesh
    I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

    Read the article

  • why Ubuntu 12.04.1 nautilus left panel, doesn't show other partitions and usb drives?

    - by amerllica
    how do you do friends will be fine I had Ubuntu 12.04 and all thing work well but at one day i decide to change my partition tables, and done it. at now I've windows 8, Ubuntu 12.04.1 and Backtrack5 R3 on my laptop. my partitions are: /dev/sda1 * 2048 58597375 29297664 7 HPFS/NTFS/exFAT /dev/sda2 58601472 976773119 459085824 5 Extended /dev/sda5 58605120 797020159 369207520 7 HPFS/NTFS/exFAT /dev/sda6 797030400 933763071 68366336 83 Linux /dev/sda7 933765120 972834815 19534848 83 Linux /dev/sda8 972836864 976773119 1968128 82 Linux swap / Solaris at first I install windows 8 and then Backtrack5 R3, and at last I install Ubuntu 12.04.1 and I realize that my Ubuntu nautilus doesn't show other partitions or usb/cd/dvd drives. I search in Google and various Linux or Ubuntu forums, But I can't find any solution, just one thing... that is "gvfs-gdu-volume" cause nautilus left panel show other partitions which didn't mounted. but when I see top there isn't this program. who can I solve this problem? how nautilus can show other partitions or drives in its left panel once again?

    Read the article

  • Mounting a new hard drive (sda1) to my existing filesystem

    - by shank22
    I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

    Read the article

  • Chock-full of Identity Customers at Oracle OpenWorld

    - by Tanu Sood
      Oracle Openworld (OOW) 2012 kicks off this coming Sunday. Oracle OpenWorld is known to bring in Oracle customers, organizations big and small, from all over the world. And, Identity Management is no exception. If you are looking to catch up with Oracle Identity Management customers, hear first-hand about their implementation experiences and discuss industry trends, business drivers, solutions and more at OOW, here are some sessions we recommend you attend: Monday, October 1, 2012 CON9405: Trends in Identity Management 10:45 a.m. – 11:45 a.m., Moscone West 3003 Subject matter experts from Kaiser Permanente and SuperValu share the stage with Amit Jasuja, Snior Vice President, Oracle Identity Management and Security to discuss how the latest advances in Identity Management are helping customers address emerging requirements for securely enabling cloud, social and mobile environments. CON9492: Simplifying your Identity Management Implementation 3:15 p.m. – 4:15 p.m., Moscone West 3008 Implementation experts from British Telecom, Kaiser Permanente and UPMC participate in a panel to discuss best practices, key strategies and lessons learned based on their own experiences. Attendees will hear first-hand what they can do to streamline and simplify their identity management implementation framework for a quick return-on-investment and maximum efficiency. CON9444: Modernized and Complete Access Management 4:45 p.m. – 5:45 p.m., Moscone West 3008 We have come a long way from the days of web single sign-on addressing the core business requirements. Today, as technology and business evolves, organizations are seeking new capabilities like federation, token services, fine grained authorizations, web fraud prevention and strong authentication. This session will explore the emerging requirements for access management, what a complete solution is like, complemented with real-world customer case studies from ETS, Kaiser Permanente and TURKCELL and product demonstrations. Tuesday, October 2, 2012 CON9437: Mobile Access Management 10:15 a.m. – 11:15 a.m., Moscone West 3022 With more than 5 billion mobile devices on the planet and an increasing number of users using their own devices to access corporate data and applications, securely extending identity management to mobile devices has become a hot topic. This session will feature Identity Management evangelists from companies like Intuit, NetApp and Toyota to discuss how to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. CON9491: Enhancing the End-User Experience with Oracle Identity Governance applications 11:45 a.m. – 12:45 p.m., Moscone West 3008 As organizations seek to encourage more and more user self service, business users are now primary end users for identity management installations.  Join experts from Visa and Oracle as they explore how Oracle Identity Governance solutions deliver complete identity administration and governance solutions with support for emerging requirements like cloud identities and mobile devices. CON9447: Enabling Access for Hundreds of Millions of Users 1:15 p.m. – 2:15 p.m., Moscone West 3008 Dealing with scale problems? Looking to address identity management requirements with million or so users in mind? Then take note of Cisco’s implementation. Join this session to hear first-hand how Cisco tackled identity management and scaled their implementation to bolster security and enforce compliance. CON9465: Next Generation Directory – Oracle Unified Directory 5:00 p.m. – 6:00 p.m., Moscone West 3008 Get the 360 degrees perspective from a solution provider, implementation services partner and the customer in this session to learn how the latest Oracle Unified Directory solutions can help you build a directory infrastructure that is optimized to support cloud, mobile and social networking and yet deliver on scale and performance. Wednesday, October 3, 2012 CON9494: Sun2Oracle: Identity Management Platform Transformation 11:45 a.m. – 12:45 p.m., Moscone West 3008 Sun customers are actively defining strategies for how they will modernize their identity deployments. Learn how customers like Avea and SuperValu are leveraging their Sun investment, evaluating areas of expansion/improvement and building momentum. CON9631: Entitlement-centric Access to SOA and Cloud Services 11:45 a.m. – 12:45 p.m., Marriott Marquis, Salon 7 How do you enforce that a junior trader can submit 10 trades/day, with a total value of $5M, if market volatility is low? How can hide sensitive patient information from clerical workers but make it visible to specialists as long as consent has been given or there is an emergency? How do you externalize such entitlements to allow dynamic changes without having to touch the application code? In this session, Uberether and HerbaLife take the stage with Oracle to demonstrate how you can enforce such entitlements on a service not just within your intranet but also right at the perimeter. CON3957 - Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 11:45 a.m. – 12:45 p.m., Moscone West 3003 In this session, Virgin Media, the U.K.’s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. CON9493: Identity Management and the Cloud 1:15 p.m. – 2:15 p.m., Moscone West 3008 Security is the number one barrier to cloud service adoption.  Not so for industry leading companies like SaskTel, ConAgra foods and UPMC. This session will explore how these organizations are using Oracle Identity with cloud services and how some are offering identity management as a cloud service. CON9624: Real-Time External Authorization for Middleware, Applications, and Databases 3:30 p.m. – 4:30 p.m., Moscone West 3008 As organizations seek to grant access to broader and more diverse user populations, the importance of centrally defined and applied authorization policies become critical; both to identify who has access to what and to improve the end user experience.  This session will explore how customers are using attribute and role-based access to achieve these goals. CON9625: Taking control of WebCenter Security 5:00 p.m. – 6:00 p.m., Moscone West 3008 Many organizations are extending WebCenter in a business to business scenario requiring secure identification and authorization of business partners and their users. Leveraging LADWP’s use case, this session will focus on how customers are leveraging, securing and providing access control to Oracle WebCenter portal and mobile solutions. Thursday, October 4, 2012 CON9662: Securing Oracle Applications with the Oracle Enterprise Identity Management Platform 2:15 p.m. – 3:15 p.m., Moscone West 3008 Oracle Enterprise identity Management solutions are designed to secure access and simplify compliance to Oracle Applications.  Whether you are an EBS customer looking to upgrade from Oracle Single Sign-on or a Fusion Application customer seeking to leverage the Identity instance as an enterprise security platform, this session with Qualcomm and Oracle will help you understand how to get the most out of your investment. And here’s the complete listing of all the Identity Management sessions at Oracle OpenWorld.

    Read the article

  • The Internet of Things & Commerce: Part 2 -- Interview with Brian Celenza, Commerce Innovation Strategist

    - by Katrina Gosek, Director | Commerce Product Strategy-Oracle
    Internet of Things & Commerce Series: Part 2 (of 3) Welcome back to the second installation of my three part series on the Internet of Things & Commerce. A few weeks ago, I wrote “The Next 7,000 Days” about how we’ve become embedded in a digital architecture in the last 7,000 days since the birth of the internet – an architecture that everyday ties the massive expanse of the internet evermore closely with our physical lives. This blog series explores how this new blend of virtual and material will change how we shop and how businesses sell. Now enjoy reading my interview with Brian Celenza, one of the chief strategists in our Oracle Commerce innovation group. He comments on the past, present, and future of the how the growing Internet of Things relates and will relate to the buying and selling of goods on and offline. -------------------------------------------- QUESTION: You probably have one of the coolest jobs on our team, Brian – and frankly, one of the coolest jobs in our industry. As part of the innovation team for Oracle Commerce, you’re regularly working on bold features and groundbreaking commerce-focused experiences for our vision demos. As you look back over the past couple of years, what is the biggest trend (or trends) you’ve seen in digital commerce that started to bring us closer to this idea of what people are calling an “Internet of Things”? Brian: Well as you look back over the last couple of years, the speed at which change in our industry has moved looks like one of those blurred movement photos – you know the ones where the landscape blurs because the observer is moving so quickly your eye focus can’t keep up. But one thing that is absolutely clear is that the biggest catalyst for that speed of change – especially over the last three years – has been mobile. Mobile technology changed everything. Over the last three years the entire thought process of how to sell on (and offline) has shifted because of mobile technology advances. Particularly for eCommerce professionals who have started to move past the notion of “channels” for selling goods to this notion of “Mobile First”… then the Web site. Or more accurately, that everything – smartphones, web, store, tablet – is just one channel or has to act like one singular access point to the same product catalog, information and content. The most innovative eCommerce professionals realized some time ago that it’s not ideal to build an eCommerce Web site and then build everything on top of or off of it. Rather, they want to build an eCommerce API and then integrate it will all other systems. To accomplish this, they are leveraging all the latest mobile technologies or possibilities mobile technology has opened up: 4G and LTE, GPS, bluetooth, touch screens, apps, html5… How has this all started to come together for shopping experiences on and offline? Well to give you a personal example, I remember visiting an Apple store a few years ago and being amazed that I didn’t have to wait in line because a store associate knew everything about me from my ID – right there on the sales floor – and could check me out anywhere. Then just a few months later (when like any good addict) I went back to get the latest and greatest new gadget, I felt like I was stealing it because I could check myself out with my smartphone. I didn’t even need to see a sales associate OR go to a cash register. Amazing. And since then, all sort sorts of companies across all different types of industries – from food service to apparel –  are starting to see mobile payments in the billions of dollars now thanks not only to the convenience factor but to smart loyalty rewards programs as well. These are just some really simple current examples that come to mind. So many different things have happened in the last couple of years, it’s hard to really absorb all of the quickly – because as soon as you do, everything changes again! Just like that blurry speed photo image. For eCommerce, however, this type of new environment underscores the importance of building an eCommerce API – a platform that has services you can tap in to and build on as the landscape changes at a fever pitch. It’s a mobile first perspective. A web service perspective – particularly if you are thinking of how to engage customers across digital and physical spaces. —— QUESTION: Thanks for bringing us into the present – some really great examples you gave there to put things into perspective. So what do you see as the biggest trend right now around the “Internet of Things” – and what’s coming next few years? Brian: Honestly, even sitting where I am in the innovation group – it’s hard to look out even 12 months because, well, I don’t even think we’ve fully caught up with what is possible now. But I can definitely say that in the last 12 months and in the coming 12 months, in the technology and eCommerce world it’s all about iBeacons. iBeacons are awesome tools we have right now to tie together physical and digital shopping experiences. They know exactly where you are as a shopper and can communicate that to businesses. Currently there seem to be two camps of thought around iBeacons. First, many people are thinking of them like an “indoor GPS”, which to be fair they literally are. The use case this first camp envisions for iBeacons is primarily for advertising and marketing. So they use iBeacons to push location-based promotions to customers if they are close to a store or in a store. You may have seen these types of mobile promotions start to pop up occasionally on your smart phone as you pass by a store you’ve bought from in the past. That’s the work of iBeacons. But in my humble opinion, these promotions probably come too early in the customer journey and although they may be well timed and work to “convert” in some cases, I imagine in most they are just eroding customer trust because they are kind of a “one-size-fits-all” solution rather than one that is taking into account what exactly the customer might be looking for in that particular moment. Maybe they just want more information and a promotion is way too soon for that type of customer. The second camp is more in line with where my thinking falls. In this case, businesses take a more sensitive approach with iBeacons to customers’ needs. Instead of throwing out a “one-size-fits-all” to any passer by with iBeacons, the use case is more around looking at the physical proximity of a customer as an opportunity to provide a service: show expert reviews on a product they may be looking at in a particular aisle of a store, offer the opportunity to compare prices (and then offer a promotion), signal an in-store associate if a customer has been in the store for more than 10 minutes in one place. These are all less intrusive more value-driven uses of iBeacons. And they are more about building customer trust through service. To take this example a bit further into the future realm of “Big Data” and “Internet of Things” businesses could actually use the Oracle Commerce Platform and iBeacons to “silently” track customer movement w/in the store to provide higher quality service. And this doesn’t have to be creepy or intrusive. Simply if a customer has been in a particular department or aisle for more than a 5 or 10 minutes, an in-store associate could come over an offer some assistance already knowing customer preferences from their online profile and maybe even seeing the items in a shopping cart they started at home. None of this has to be revealed to the customer, but it certainly could boost the level of service an in-store sales associate could provide. Or, in another futuristic example, stores could use the digital footprint of the physical store transmitted by iBeacons to generate heat maps of the store that could be tracked over time. Imagine how much you could find out about which parts of the store are more busy during certain parts of the day or seasons. This could completely revolutionize how physical merchandising is deployed or where certain high value / new items are placed. And / or this use of iBeacons could also help businesses figure out if customers are getting held up in certain parts of the store during busy days like Black Friday. If long lines are causing customers to bounce from a physical store and leave those holiday gifts behind, maybe having employees with mobile check as an option could remove the cash register bottleneck. But going to back to my original statement, it’s all still very early in the story for iBeacons. The hardware manufacturers are still very new and there is still not one clear standard.  Honestly, it all goes back to building and maintaining an extensible and flexible platform for anywhere engagement. What you’re building today should allow you to rapidly take advantage of whatever unimaginable use cases wait around the corner. ------------------------------------------------------ I hope you enjoyed the brief interview with Brian. It’s really awesome to have such smart and innovation-minded individuals on our Oracle Commerce innovation team. Please join me again in a few weeks for Part 3 of this series where I interview one of the product managers on our team about how the blending of digital and in-store selling in influencing our product development and vision.

    Read the article

  • COLLABORATE 12: Oracle WebCenter Featured at Largest Oracle User Conference

    - by kellsey.ruppel
    With more than 70 out of about 800 individual sessions, Oracle WebCenter will be a major focus of COLLABORATE 12, this year's Independent Oracle User Group (IOUG) conference, taking place April 22–26 in Las Vegas, Nevada. "COLLABORATE 12 provides a unique chance to share experiences with Oracle customers, product managers, and partners, so you can deepen your knowledge about Oracle WebCenter upgrades, user provisioning, workflow, integration, and much more," says Roel Stalman, vice president of product management for Oracle WebCenter. "In fact, COLLABORATE can form a key part of your training plans for 2012." Full-Day Oracle WebCenter Deep Dive On Sunday, April 22, from 9 a.m. to 3 p.m., registered conference attendees can attend a special deep dive into Oracle WebCenter. During the program, experts from Oracle product management and development teams will delve into all four pillars of Oracle WebCenter—and explore how all four are integrated together. Attendees can also expect A preview of Oracle WebCenter 12c Detailed product demos Prize giveaways throughout the day Going Mobile Oracle WebCenter and mobile technology will be a major theme at this year's conference, with a number of sessions devoted to maximizing the availability of content while also ensuring security. Sessions include Are You Making These Mistakes in Your Oracle Site Studio Implementations? Monday, April 23 at 11 a.m. Case Study: How Medtronic Brought Oracle WebCenter Content to the iPad Tuesday, April 24 at 10:45 a.m. Exposing Oracle WebCenter Data on Mobile and Desktop Devices Through the REST API Tuesday, April 24 at 10:45 a.m. Mobile First: Delivering a Compelling Mobile Experience with Oracle WebCenter Tuesday, April 24 at 4:30 p.m. Optimizing Your Oracle WebCenter Portal Solution for Mobile Devices Wednesday, April 25 at 8:15 a.m. Build an iPhone App Using Oracle WebCenter Portal REST APIs Wednesday, April 25 at 9:30 a.m. Other Don't-Miss Sessions Conference organizers have indicated that the following sessions in particular should be of wide interest to attendees. Oracle WebCenter: Vision, Strategy, and Overview Monday, April 23 at 9:45 a.m. This session explores Oracle's integrated approach to portals and composite applications, Web experience management, enterprise content management, and enterprise social collaboration. It also provides insight into Oracle's strategic direction for Oracle WebCenter. Oracle Webcenter Content, Oracle WebCenter Spaces, Oracle WebCenter Sites: Which Is Right for Me? Monday, April 23 at 1:15 p.m. This session helps attendees determine the best Oracle WebCenter solution to meet their needs for an intranet, corporate Website, or partner portal. Learn more and register to attend COLLABORATE 12.

    Read the article

  • Partnering with your Applications – The Oracle AppAdvantage Story

    - by JuergenKress
    So, what is Oracle AppAdvantage? A practical approach to adopting cloud, mobile, social and other trends A guided path to aligning IT more closely with business objectives Maximizing the value of existing investments in applications A layered approach to simplifying IT, building differentiation and bringing innovation All of the above? Enhance the value of your existing applications investment with #Oracle #AppAdvantage Aligning biz and IT expectations on Simplifying IT, building Differentiation and Innovation #AppAdvantage Adopt a pace layered approach to extracting biz value from your apps with #AppAdvantage Bringing #cloud, #social, #mobile to your apps with #Oracle #AppAdvantage Embracing Situational IT In the next IT Leaders Editorial, Rick Beers discusses the necessity of IT disruption and #AppAdvantage. Rick Beers sheds light on the Situational Leadership and the path to success #AppAdvantage. Rick Beers draws parallels with CIO’s strategic thinking and #Oracle #AppAdvantage approach. Do you have this paper in your summer reading list? Aligning biz and IT #AppAdvantage What does Situational leadership have to do with Oracle AppAdvantage? Catch the next piece in Rick Beers’ monthly series of IT Leaders Editorial and find out. #AppAdvantage Middleware Minutes with Howard Beader – August edition In the quarterly column, @hbeader discusses impact of #cloud, #mobile, #fastdata on #middleware Making #cloud, #mobile, #fastdata a part of your IT strategy with #middleware What keeps the #oracle #middleware team busy? Find out in the inaugural post in quarterly update on #middleware Recent #middleware news update along with a preview of things to come from #Oracle, in @hbeader ‘s quarterly column In his inaugural post, Howard Beader, senior director for Oracle Fusion Middleware, discusses the recent industry trends including mobile, cloud, fast data, integration and how these are shaping the IT and business requirements. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: AppAdvantage,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Exchange 2010 - No Push notification when when deleting emails from Outlook

    - by ThinkTank
    Hi I'm setting up a Exchange 2010 server for our test environment. I'm running Windows 2008R2 enterprise on this machine. Iv'e also installed all updates available for windows and exchange 2010 including rollup 1 and 2 for exchange that include bugfixes regarding push notifications. My problem is when deleting mail or marking mail as read don't trigger a push notification. The happens when I use webgui, mobile phone and Outlook 2007. When deleting a email in Outlook 2007 the changes get sent to the server since the changes are visible in webgui but not on mobile phone. I get push notifications when I get new emails since new emails appear instantly on the mobile phone. Is this normal behaviour on Exchange 2010? For me it seems a bit funny. If i force sync on mobile phone the changes appear. Iv'e tested this on both iphone and HTC HD2(Running Windows Mobile 6.5) with same results.

    Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >