Search Results

Search found 7299 results on 292 pages for 'peter short'.

Page 140/292 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• HP dv6000 laptop powers on only if plugged in

  - by Ben

  My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

  Read the article

• Concurrent backups in SQL Server?

  - by Mikey Cee

  We currently have our backups managed by a third party company. There are a bunch of agent jobs created that take full backups (4 times a day) and transaction log backups (4 times an hour). We now want to manage our backups in house, but don't want to disable the third party's jobs until we are sure that we have everything configured correctly internally So I am proposing to have a short period (say, a couple of days) where backups are being taken both by the old and the new system. I am wondering what the ramifications of having these two different systems both manage backups, and the potential pitfalls of having backups taken simultaneously. Is this even supported? If so, and bearing in mind that the system can cope with one backup without any noticeable performance degradation, is it fairly logical to assume that it should be able to cope with two simultaneous backups? Currently the load on the server is fairly light and it rarely struggles. Any advice is appreciated

  Read the article

• Windows shuts down unexpectedly when waking up from sleep

  - by Kush

  I've been facing this issue since yesterday, whenever I put the computer into sleep mode and when I wake up, it takes me to boot menu with choices; start Windows normally, safe mode, etc. in short, it shuts down unexpectedly while waking up. I have my laptop dual booted with up-to-date Windows 7 SP1 (32-bit) and Ubuntu 10.10. This problem is not happening with Ubuntu. I googled the issue and went through this, this and this page. But, none of the threads were helpful to solve it. I've found that there's something to do with device drivers. What can be done to resolve the issue? Can SFC utility solve it if it is due to corrupt system files?

  Read the article

• Reducing latency for different geographic regions on Amazon Cloud

  - by Shoaibi

  I have got an application which has three components Application code : Amazon EC2 US-EAST-1 instance Application images, and other static data : Amazon S3 with CloudFront Application Database : Amazon RDS In short i need something like Cloud Front for EC2. In long, people using this application from a different region say middle east will have faster static content downloading due to Cloud Front but there would be a lot of latency in communicating to EC2 instance. I want to use a budget friendly way of enhancing this. Launching Amazon Instances in every region that offer is sure a choice, but isn't really cheap, so would try to avoid it unless its last resort. Also say if my clients also need to communicate to the RDS database directly, is there some kind of solution which gives that kind of functionality mentioned above, but for RDS?

  Read the article

• Are there any statistics on the number of networks using Ethernet Jumbo frames?

  - by Russell Heilling

  I am often told by Sales Engineers and Product managers that a Layer 2 Ethernet service is not fit for purpose if the maximum supported frame size is in the 1518-1522 range (enough to support standard Ethernet frames or VLAN tagged frames). Or in other words: an MTU of 1500 is not enough (see this blog post for my definition of MTU and a short rant on how the term is often misused) I am never able to get any details from them on: a) What proportion of customers (Enterprise / SMB) require Jumbo frames b) What are typical expectations on frame size for Jumbos on WAN links? 1600, 2000, 9k, etc... I know that in Telco and Data Centre environments Jumbos are pretty common, but I am after some insight as to how common this is within Enterprise and SMB networks.

  Read the article

• Install PHP on RedHat

  - by John R

  I just ran yum install php in the command prompt. Everything went fine ('complete!') as per the dialogue. I then uploaded a file that does not use short tags and is named with the proper extension (i.e., the name is test.php). <?php print "hello world"; ?> When I navigate my browser to test.php it just prints each of the characters shown above; i.e., PHP is not interpreting it. What might be the problem? Also, if there is a configuration file that needs to be updated, please tell me what directory path I am likely to find that file. Edit: Apache2 & Redhat

  Read the article

• Enable dtrace without sudo on Mac OS X?

  - by Juan

  How do I enable users to use dtrace on Mac OS X. I am trying to do the equivalent of strace on Linux, and I don't like running applications with elevated privileges. UPDATE Ok, the best I can tell. The only way to keep a nefarious application from ruining the system by debugging it is to. Attach to the process in a separate console Use sudo twice So that: sudo dtruss sudo -u myusername potentially_harmful_app I verified this with this short program: #include <iostream> #include <unistd.h> int main() { std::cout << "effective euid " << geteuid() << "\n"; } See this discussion for more info: http://discussions.apple.com/message.jspa?messageID=6430877

  Read the article

• No resizing / Auto fit and Unity with Ubuntu 9.10 as Guest at all

  - by andyt25

  Hi! Problem 1: I have Ubuntu 9.10 installed and Workstation 7.01. All VMs (WinXP, Win7, Debian) I run do not resize any more. Problem 2: Unity Mode "Bar" works for short and disapears after seconds .. opened programs with unity mode work well, but the bar disapears History: I changed from Ubuntu 9.04 to 9.10, no VM was moved or changed. Latest VMWare Tools are installed, Auto fit Guest is activated. I am quite sure, that resizing / auto fitting and Unity Mode worked well with Ubuntu 9.04 thx for a hint, i hope didn't overlook something ..

  Read the article

• Lazy non-modifiable list in Google Collections

  - by mindas

  I was looking for a decent implementation of a generic lazy non-modifiable list implementation to wrap my search result entries. The unmodifiable part of the task is easy as it can be achieved by Collections.unmodifiableList() so I only need to sort out the the lazy part. Surprisingly, google-collections doesn't have anything to offer; while LazyList from Apache Commons Collections does not support generics. I have found an attempt to build something on top of google-collections but it seems to be incomplete (e.g. does not support size()), outdated (does not compile with 1.0 final) and requiring some external classes, but could be used as a good starting point to build my own class. Is anybody aware of any good implementation of a LazyList? If not, which option do you think is better: write my own implementation, based on google-collections ForwardingList, similar to what Peter Maas did; write my own wrapper around Commons Collections LazyList (the wrapper would only add generics so I don't have to cast everywhere but only in the wrapper itself); just write something on top of java.util.AbstractList; Any other suggestions are welcome.

  Read the article

• OSX: iTunes won't play .ogg files over shared library

  - by Decavolt

  I have an OSX 10.5 box that is sharing its iTunes library and another 10.6 box connecting to that library through iTunes. It works as expected except for ogg files. Those ogg files are visible and selectable in the shared library but will not play through the share on the client machine. If I move the ogg files to the client machine they play locally just fine. They also play locally on the host machine. They just won't play through the iTunes share. Is this a bug or some other known issue? Is there a fix, short of converting all ogg files to mp3?

  Read the article

• setting up rhel 5.x RPM build server for mortal users

  - by Chen Levy

  My task is to setup a RHEL 5.x build host, that can build RPMs for mortal users. On RHEL 6.x with rpm version 4.8, I have in /usr/lib/macros: # Path to top of build area. %_topdir %{getenv:HOME}/rpmbuild On RHEL 5.x with rpm version 4.4, the %{getevn:HOME} is not available. I know that I can use /home/someuser/.rpmmacros: %_topdir /home/someuser/rpmbuild and this will work for that user, however I don't want to do this for every user separately. Moreover, since .rpmmacro will not expand ${HOME} or ~ I suspect it is unsafe to use those. This in turn make /etc/skel unstable for this task (or so I suspect). So in short, my question is: How to setup RHEL 5.x host that allow all users to build RPM packages in their home directory?

  Read the article

• My computer keeps crashing and I just want it FIXED

  - by xabaddon

  So long story short, I had my brother build me a computer for my birthday last year. I saw how good his was (also built by him) so I decided I would have him build me one. About a month after this was all finished, my computer started crashing when I when run over 3 programs. For example, an online game, a music player (spotify), skype, and a browser with a few tabs open. The way it would crash is the screen will freeze and a buzzing noise will come from whatever audio device I am using (headset, speakers) I took it to a computer tech guy and he told me my cooling system was inadequate. SOOO he led me to buy a CORSAIR H75 Liquid cooling system. Everything was good for about a week, and now it just did the same thing again. I am so freaking over this guys and I really need some help figuring out what the heck is wrong, I dont care how long it takes, just please help me.

  Read the article

• Administrator File Modification Privilege

  - by Leigh Riffel

  Windows Server 2008 apparently allows an application to somehow configure the folder so that any changes made within the folder require administrator level access. I login with an account that has administrator privileges, but is not the local administrator account. When I do so I find that I can't save changes to files opened within this folder. I know I can open the application as administrator or move the file out of the folder, make the change, then move it back in, but I'm hoping there is a better way short of disabling the protection entirely. Is there a way perhaps to remove it for the files I frequently edit?

  Read the article

• MSI netbook refuses to connect to home wireless network with Windows XP

  - by sa125

  I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• Printer monitor software across multiple workstations (AD integrated)

  - by HannesFostie

  I was asked to see if there is any kind of (free) software that allows multiple people in an office that use the same printer to see what jobs have finished recently, which are queued and which is printing. Main reason is that sometimes multiple people have the same task where they need to print some kind of form, and they are unsure whether or not their colleague has already printed the file. Because the printer is AD integrated, they only see a short message when printing, but they do not see a proper printer queue. A simple tray icon/tool would be perfect, no real graphical user interface is required. If this turns out to be too hard to find, I will attempt to write a simple application or script for the job, but since this is a low priority job I decided to ask here first before I start messing around with scripting which isn't my forte. Thanks

  Read the article

• Weird outline numbering in Microsoft Word 2008

  - by GarnerCX

  This is quite a weird question, as I think I am asking the opposite of what most people want to try and achieve with outline numbering in Microsoft Word. The outline numbering associated with the styles "Heading 1" and "Heading 2" are fine and working as normal, but the outline numbering associated with all the heading styles from "Heading 3" onwards are broken. Here is a summary of how they look: 1 1.1 1.2 2 2.1 3 3.1 1.1.1 1.1.2 4 4.1 1.1.3 So you can see that while the first two headings are numbering correctly down the document, the third level heading doesn't restart and it doesn't have the correct 1st and 2nd level numbering - they all have '1.1' as a prefix. These are all controlled by the heading styles and I have tried every combination of options in the outline numbering section of the styles. Short of building a whole new template, recreating all my custom styles and then pasting the text across, I really don't know what to do. Before I try that, does anyone know what is going on here?

  Read the article

• Converting videos to AVI with AVIDemux for compatibility

  - by Synetech

  I am trying to convert a couple of short videos to AVI (XviD) using AVIDemux. I find that while the resulting videos play fine in VLC, they do not play in an XviD DVD player (nor presumably Xbox 360, PS3, etc.). In fact, they do not even show in Windows Explorer (that is, Explorer cannot read their metadata or display thumbnails). I tried using all three of the AVI Muxer Output Format options, but none worked. Does anyone know what settings to use to produce compatible AVIs with AVIDemux? (I found an old thread where someone complained about AVIs not working on Xbox, but that was a few years ago from an older version.)

  Read the article

• UPS - Two computers - How to get them to both shutdown when battery is low?

  - by hamlin11

  Short Version: How do I get 2 computers to shutdown when a UPS battery gets low? Long Version: I have an APC UPS, the RS 1500. It has a USB cord that goes into my main dev computer. My dev computer will shutdown when the battery gets low. However, in addition, I have now hooked up a database server to the same UPS. How can I have that database server also know that it needs to shut down when the battery gets low?

  Read the article

• redmine repository management

  - by Alex

  We are trying to setup a redmine installation for our group which should work with both SVN and Git repos. Since we want to keep the repos on the server and avoid the whole privileges and hosting mess (root access, local repos, ...), we want configure redmine to manage repo creation and destruction by itself. In short, redmine should create a repository automatically for a new project and delete it if the project is deleted, with no extra setup steps from our admin. So far I found reposman for SVN and redmine_git_hosting for Git, but I am unsure if match our requirements. Are these the tools we are looking for or is there any other alternative? Thank you

  Read the article

• Re-enabling audio on an iMac

  - by Warren Seine

  Hello guys, I know Super User is not a 'tech support' forum, so I will try to make it short: my computer's sound does not work anymore. I have asked for support on the Apple board but I feel a bit on my own. To summarize, the Sound Panel of my iMac does not display any outgoing channel (headphones or internal speakers). It does not work on Windows either. Contrary to what it may seem, I have the feeling that it is not a hardware issue (and that GarageBand is somehow interfering). If you have an idea to solve the problem, please share. Making it work again is a lost cause without sending it back to Apple, so the question I'm asking is: What is the best workaround (cheap Firewire sound card?) for getting my sound back? Thanks.

  Read the article

• Fast sign in C++ float...are there any platform dependencies in this code?

  - by Patrick Niedzielski

  Searching online, I have found the following routine for calculating the sign of a float in IEEE format. This could easily be extended to a double, too. // returns 1.0f for positive floats, -1.0f for negative floats, 0.0f for zero inline float fast_sign(float f) { if (((int&)f & 0x7FFFFFFF)==0) return 0.f; // test exponent & mantissa bits: is input zero? else { float r = 1.0f; (int&)r |= ((int&)f & 0x80000000); // mask sign bit in f, set it in r if necessary return r; } } (Source: ``Fast sign for 32 bit floats'', Peter Schoffhauzer) I am weary to use this routine, though, because of the bit binary operations. I need my code to work on machines with different byte orders, but I am not sure how much of this the IEEE standard specifies, as I couldn't find the most recent version, published this year. Can someone tell me if this will work, regardless of the byte order of the machine? Thanks, Patrick

  Read the article

• NMap route determination on Windows 7 x64

  - by user30772

  C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

  Read the article

• Qt, MSVC, and /Zc:wchar_t- == I want to blow up the world

  - by Noah Roberts

  So Qt is compiled with /Zc:wchar_t- on windows. What this means is that instead of wchar_t being a typedef for some internal type (__wchar_t I think) it becomes a typedef for unsigned short. The really cool thing about this is that the default for MSVC is the opposite, which of course means that the libraries you're using are likely compiled with wchar_t being a different type than Qt's wchar_t. This doesn't become an issue of course until you try to use something like std::wstring in your code; especially when one or more libraries have functions that accept it as parameters. What effectively happens is that your code happily compiles but then fails to link because it's looking for definitions using std::wstring<unsigned short...> but they only contain definitions expecting std::wstring<__wchar_t...> (or whatever). So I did some web searching and ran into this link: http://bugreports.qt.nokia.com/browse/QTBUG-6345 Based on the statement by Thiago Macieira, "Sorry, we will not support building Qt like this," I've been worried that fixing Qt to work like everything else might cause some problem and have been trying to avoid it. We recompiled all of our support libraries with the /Zc:wchar_t- flag and have been fairly content with that until a couple days ago when we started trying to port over (we're in the process of switching from Wx to Qt) some serialization code. Because of how win32 works, and because Wx just wraps win32, we've been using std::wstring to represent string data with the intent of making our product as i18n ready as possible. We did some testing and Wx did not work with multibyte characters when trying to print special stuff (even not so special stuff like the degree symbol was an issue). I'm not so sure that Qt has this problem since QString isn't just a wrapper to the underlying _TCHAR type but is a Unicode monster of some sort. At any rate, the serialization library in boost has compiled parts. We've attempted to recompile boost with /Zc:wchar_t- but so far our attempts to tell bjam to do this have gone unheeded. We're at an impasse. From where I'm sitting I have three options: Recompile Qt and hope it works with /Zc:wchar_t. There's some evidence around the web that others have done this but I have no way of predicting what will happen. All attempts to ask Qt people on forums and such have gone unanswered. Hell, even in that very bug report someone asks why and it just sat there for a year. Keep fighting with bjam until it listens. Right now I've got someone under me doing that and I have more experience fighting with things to get what I want but I do have to admit to getting rather tired of it. I'm also concerned that I'll KEEP running into this issue just because Qt wants to be a c**t. Stop using wchar_t for anything. Unfortunately my i18n experience is pretty much 0 but it seems to me that I just need to find the right to/from function in QString (it has a BUNCH) to encode the Unicode into 8-bytes and visa-versa. UTF8 functions look promising but I really want to be sure that no data will be lost if someone from Zimbabfuckegypt starts writing in their own language and the documentation in QString frightens me a little into thinking that could happen. Of course, I could always run into some library that insists I use wchar_t and then I'm back to 1 or 2 but I rather doubt that would happen. So, what's my question... Which of these options is my best bet? Is Qt going to eventually cause me to gouge out my own eyes because I decided to compile it with /Zc:wchar_t anyway? What's the magic incantation to get boost to build with /Zc:wchar_t- and will THAT cause permanent mental damage? Can I get away with just using the standard 8-bit (well, 'common' anyway) character classes and be i18n compliant/ready? How do other Qt developers deal with this mess?

  Read the article

• Weird graphical artefacts on OS X Snow Leopard.

  - by Debilski

  Since a couple of days I experience some strange graphical artefacts on Snow Leopard. Usually after a certain uptime, the background image would show some strange colours at some place. This could be reverted by reloading the background image. But the problem would appear again after rebooting (and waiting for an indefinite time). Sometimes, the shadow of windows would also have some artefacts; and this time the application switcher is completely distorted. Any ideas where I need to search for a solution of the problem? Edit: Model: MacBook Gen. 3.1 / all updates installed Update: After not having used Safari for a while, the problem has not occurred anymore (at least not after 20 days of uptime). Could well be that the problem had its origin in Safari or a Safari-related plugin. (Possibly Flash or Click-to-Flash as it did not happen with both deactivated, though the running time with this configuration might have been to short to be of any validity.)

  Read the article

• Mail::Sendmail with attachments and embed Perl in Bash script

  - by beicha

  1 I want to embed below Perl script in BASH script, and the Message should read from a message.txt file. How to realize this? use Mail::Sendmail; %mail = ( To => '[email protected]', From => '[email protected]', Message => "This is a very short message" ); sendmail(%mail) or die $Mail::Sendmail::error; print "OK. Log says:\n", $Mail::Sendmail::log; 2 How to attach log files via Perl script?

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >