Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 141/1663 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

  • Listing directories in Linux from C

    - by nunos
    I am trying to simulate linux command ls using linux api from c. Looking at the code it does make sense, but when I run it I get "stat error: No such file or directory". I have checked that opendir is working ok. I think the problem is in stat, which is returning -1 even though I think it should return 0. What am I missing? Thanks for your help. #include <stdio.h> #include <stdlib.h> #include <string.h> #include <dirent.h> #include <sys/stat.h> #include <errno.h> int main(int argc, char *argv[]) { DIR *dirp; struct dirent *direntp; struct stat stat_buf; char *str; if (argc != 2) { fprintf( stderr, "Usage: %s dir_name\n", argv[0]); exit(1); } if ((dirp = opendir( argv[1])) == NULL) { perror(argv[1]); exit(2); } while ((direntp = readdir( dirp)) != NULL) { if (stat(direntp->d_name, &stat_buf)==-1) { perror("stat ERROR"); exit(3); } if (S_ISREG(stat_buf.st_mode)) str = "regular"; else if (S_ISDIR(stat_buf.st_mode)) str = "directory"; else str = "other"; printf("%-25s - %s\n", direntp->d_name, str); } closedir(dirp); exit(0); }

    Read the article

  • Synchronizing files between Linux servers, through FTP

    - by Daniel Magliola
    I have the following configuration of servers: 1 central linux server, a VPS 8 satellite linux servers, "crappy shared hostings" I have a bunch of files that I need to have in all servers. Right now i'm copying them everywhere manually, but I want to be able to copy them to the central server, and then have a scheduled process that runs every now and then and synchronizes them (only outwardly, no need to try to find "new" files in the satellite servers). There are a couple of catches though: I can't have any custom software in the satellite servers, or do strange command line things that'll auto connect to them and send the files directly. I know this is the way these kinds of things are normally done, but the satellite servers are crappy shared hosting ones where I have absolutely no control over anything. I need to send the files over FTP I also need to have, in my central server, a list of the files that are available in each of the satellite servers, to make sure they are ready before I send traffic to them. If I were to do this manually, the steps would be: get the list of files in a satellite server compare to my own, and send the files that are missing get the list of files again, and store it in my central database. I'd like to know what tools are out there that can alleviate as much of this as possible, first the syncing, and then the "getting the list of files available in the other server". I'm going to be doing everything from PHP, not sure if there are good tools to "use FTP from PHP", which i'm pretty sure i'll have to do for step 3 at least. Thanks in advance for any ideas! Daniel

    Read the article

  • linux new/delete, malloc/free large memory blocks

    - by brian_mk
    Hi folks, We have a linux system (kubuntu 7.10) that runs a number of CORBA Server processes. The server software uses glibc libraries for memory allocation. The linux PC has 4G physical memory. Swap is disabled for speed reasons. Upon receiving a request to process data, one of the server processes allocates a large data buffer (using the standard C++ operator 'new'). The buffer size varies depening upon a number of parameters but is typically around 1.2G Bytes. It can be up to about 1.9G Bytes. When the request has completed, the buffer is released using 'delete'. This works fine for several consecutive requests that allocate buffers of the same size or if the request allocates a smaller size than the previous. The memory appears to be free'd ok - otherwise buffer allocation attempts would eventually fail after just a couple of requests. In any case, we can see the buffer memory being allocated and freed for each request using tools such as KSysGuard etc. The problem arises when a request requires a buffer larger than the previous. In this case, operator 'new' throws an exception. It's as if the memory that has been free'd from the first allocation cannot be re-allocated even though there is sufficient free physical memory available. If I kill and restart the server process after the first operation, then the second request for a larger buffer size succeeds. i.e. killing the process appears to fully release the freed memory back to the system. Can anyone offer an explanation as to what might be going on here? Could it be some kind of fragmentation or mapping table size issue? I am thinking of replacing new/delete with malloc/free and use mallopt to tune the way the memory is being released to the system. BTW - I'm not sure if it's relevant to our problem, but the server uses Pthreads that get created and destroyed on each processing request. Cheers, Brian.

    Read the article

  • Execute linux AT Command via PHP

    - by ahmad Rabie
    When I run this code via ssh echo wget http://domain.com/send_me_email.php | at 12:54 it run correctly and send me an email at that time. but if I run a php Like this exec("echo wget http://domain.com/send_me_email.php | at 12:54"); exec("atq",$arr); print_r($arr); result of that code is something like this : job 63 at 2011-11-27 12:54 ,As you can see the job created successfully but I don't receive any Email at that time?! I test this line in php exec("wget http://domain.com/send_me_email.php"); and it send me an email, it means that I have permission to run exec and wget via php.but what is problem? I cant understand what is my problem. Please help me. thanks

    Read the article

  • Port Win32 DLL hook to Linux

    - by peachykeen
    I have a program (NWShader) which hooks into a second program's OpenGL calls (NWN) to do post-processing effects and whatnot. NWShader was originally built for Windows, generally modern versions (win32), and uses both DLL exports (to get Windows to load it and grab some OpenGL functions) and Detours (to hook into other functions). I'm using the trick where Win will look in the current directory for any DLLs before checking the sysdir, so it loads mine. I have on DLL that redirects with this method: #pragma comment(linker, "/export:oldFunc=nwshader.newFunc) To send them to a different named function in my own DLL. I then do any processing and call the original function from the system DLL. I need to port NWShader to Linux (NWN exists in both flavors). As far as I can tell, what I need to make is a shared library (.so file). If this is preloaded before the NWN executable (I found a shell script to handle this), my functions will be called. The only problem is I need to call the original function (I would use various DLL dynamic loading methods for this, I think) and need to be able to do Detour-like hooking of internal functions. At the moment I'm building on Ubuntu 9.10 x64 (with the 32-bit compiler flags). I haven't been able to find much on Google to help with this, but I don't know exactly what the *nix community refers to it as. I can code C++, but I'm more used to Windows. Being OpenGL, the only part the needs modified to be compatible with Linux is the hooking code and the calls. Is there a simple and easy way to do this, or will it involve recreating Detours and dynamically loading the original function addresses?

    Read the article

  • cp command force

    - by user121196
    currently there's a xxx dir already in /home/yyy I'm trying to overwrite it cp -fr ../xxx /home/yyy/ doesn't work still prompts me to overwrite the individual files. how do I fix it?

    Read the article

  • Linux C debugging library to detect memory corruptions

    - by calandoa
    When working sometimes ago on an embedded system with a simple MMU, I used to program dynamically this MMU to detect memory corruptions. For instance, at some moment at runtime, the foo variable was overwritten with some unexpected data (probably by a dangling pointer or whatever). So I added the additional debugging code : at init, the memory used by foo was indicated as a forbidden region to the MMU; each time foo was accessed on purpose, access to the region was allowed just before then forbidden just after; a MMU irq handler was added to dump the master and the address responsible of the violation. This was actually some kind of watchpoint, but directly self-handled by the code itself. Now, I would like to reuse the same trick, but on a x86 platform. The problem is that I am very far from understanding how is working the MMU on this platform, and how it is used by Linux, but I wonder if any library/tool/system call already exist to deal with this problem. Note that I am aware that various tools exist like Valgrind or GDB to manage memory problems, but as far as I know, none of these tools car be dynamically reconfigured by the debugged code. I am mainly interested for user space under Linux, but any info on kernel mode or under Windows is also welcome!

    Read the article

  • Changing default compiler in Linux, using SCons

    - by ereOn
    On my Linux platform, I have several versions of gcc. Under usr/bin I have: gcc34 gcc44 gcc Here are some outputs: $ gcc --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48) $ gcc44 --version gcc44 (GCC) 4.4.0 20090514 (Red Hat 4.4.0-6) I need to use the 4.4 version of gcc however the default seems to the 4.1 one. I there a way to replace /usr/bin/gcc and make gcc44 the default compiler not using a symlink to /usr/bin/gcc44 ? The reason why I can't use a symlink is because my code will have to be shipped in a RPM package using mock. mock creates a minimal linux installation from scratch and just install the specified dependencies before compiling my code in it. I cannot customize this "minimal installation". Ideally, the perfect solution would be to install an official RPM package that replaces gcc with gcc44 as the default compiler. Is there such a package ? Is this even possible/good ? Additional information I have to use SCons (a make alternative) and it doesn't let me specify the binary to use for gcc. I will also accept any answer that will tell me how to specify the gcc binary in my SConstruct file.

    Read the article

  • Building a custom Linux Live CD

    - by Mike Heinz
    Can anyone point me to a good tutorial on creating a bootable Linux CD from scratch? I need help with a fairly specialized problem: my firm sells an expansion card that requires custom firmware. Currently we use an extremely old live CD image of RH7.2 that we update with current firmware. Manufacturing puts the cards in a machine, boots off the CD, the CD writes the firmware, they power off and pull the cards. Because of this cycle, it's essential that the CD boot and shut down as quickly as possible. The problem is that with the next generation of cards, I have to update the CD to a 2.6 kernel. It's easy enough to acquire a pre-existing live CD - but those all are designed for showing off Linux on the desktop - which means they take forever to boot. Can anyone fix me up with a current How-To? Update: So, just as a final update for anyone reading this later - the tool I ended up using was "livecd-creator". My reason for choosing this tool was that it is available for RedHat-based distributions like CentOs, Fedora and RHEL - which are all distributions that my company supports already. In addition, while the project is very poorly documented it is extremely customizable. I was able to create a minimal LiveCD and edit the boot sequence so that it booted directly into the firmware updater instead of a bash shell. The whole job would have only taken an hour or two if there had been a README explaining the configuration file!

    Read the article

  • unbuffered I/O in Linux

    - by stuck
    I'm writing lots and lots of data that will not be read again for weeks - as my program runs the amount of free memory on the machine (displayed with 'free' or 'top') drops very quickly, the amount of memory my app uses does not increase - neither does the amount of memory used by other processes. This leads me to believe the memory is being consumed by the filesystems cache - since I do not intend to read this data for a long time I'm hoping to bypass the systems buffers, such that my data is written directly to disk. I dont have dreams of improving perf or being a super ninja, my hope is to give a hint to the filesystem that I'm not going to be coming back for this memory any time soon, so dont spend time optimizing for those cases. On Windows I've faced similar problems and fixed the problem using FILE_FLAG_NO_BUFFERING|FILE_FLAG_WRITE_THROUGH - the machines memory was not consumed by my app and the machine was more usable in general. I'm hoping to duplicate the improvements I've seen but on Linux. On Windows there is the restriction of writing in sector sized pieces, I'm happy with this restriction for the amount of gain I've measured. is there a similar way to do this in Linux?

    Read the article

  • Externally disabling signals for a Linux program.

    - by Harry
    Hello, On Linux, is it possible to somehow disable signaling for programs externally... that is, without modifying their source code? Context: I'm calling a C (and also a Java) program from within a bash script on Linux. I don't want any interruptions for my bash script, and for the other programs that the script launches (as foreground processes). While I can use a... trap '' INT ... in my bash script to disable the Ctrl C signal, this works only when the program control happens to be in the bash code. That is, if I press Ctrl C while the C program is running, the C program gets interrupted and it exits! This C program is doing some critical operation because of which I don't want it be interrupted. I don't have access to the source code of this C program, so signal handling inside the C program is out of question. #!/bin/bash trap 'echo You pressed Ctrl C' INT # A C program to emulate a real-world, long-running program, # which I don't want to be interrupted, and for which I # don't have the source code! # # File: y.c # To build: gcc -o y y.c # # #include <stdio.h> # int main(int argc, char *argv[]) { # printf("Performing a critical operation...\n"); # for(;;); // Do nothing forever. # printf("Performing a critical operation... done.\n"); # } ./y Regards, /HS

    Read the article

  • Is there an RSM replacement in Windows 7? (to eject USB and Firewire devices from command line)

    - by Jay
    I know Windows XP and previous had an rsm.exe file in the <root>\windows\system32 folder that could be used to manage media. I used this command in batch files and from the command line to eject external disks (iPod, CF cardreader, etc.). This utility appears not to be included in Windows 7, and I wonder if there is some replacement utility that will allow the same thing. I've been unable to find any such thing. I'm aware of the 3rd party utilities; this question is only about what is included with Windows 7.

    Read the article

  • How do I enable SQLite on Linux/Apache/PHP?

    - by Edward Tanguay
    To enable SQLite on my Windows/Apache/PHP setup, I uncomment the following lines in the php.ini file and restart Apache: extension=php_pdo.dll extension=php_pdo_sqlite.dll Now I have a VPS with Suse Linux 10.3 and Apache/PHP was set automatically. Looking through the php.ini file to make the above changes, I see that things are a little different on Linux: there is no list of extensions to uncomment I found "extension_dir = /usr/lib/php5/extensions" but in this directory find only: pdo.so pdo_mysql.so How can I enable SQLite in this Linux environment?

    Read the article

  • How to get my external IP address (over NAT) from the Windows command-line?

    - by Diogo Rocha
    The Windows "ipconfig" command can only show me the parameters from the Ethernet interfaces from my machine (even with the "ipconfig /all" argument). It can show detailed information about the interface, but it will never show me my external IP address over a NAT network. However, there are several websites, such as "What is my IP address" that can get and show my external IP address. So I'm wondering, is possible to get this value externally? Should I expect that there is some way to get this information from a command line at my local machine... I need to get this value to log on an application that I'm doing with VBScript. There is some way to do this, from a "cmd" on Windows?

    Read the article

  • How to run a Turnkey Linux virtual machine on XenServer?

    - by Jader Dias
    Turnkey Linux distributes Linux virtual machines in a Xen compatible format. I have a XenServer instance running and I would like to run a recently downloaded Turnkey Linux virtual machine on it. But I have never used XenServer before. Can you point me a tutorial specific for this case, since the manual doens't seem to cover it very well?

    Read the article

  • How to get my external IP address(over NAT) from Windows command-line?

    - by Diogo Rocha
    Windows "ipconfig" command can only show me the parameters from the ethernet interfaces from my machine(even with the "ipconfig /all" argument), it can show detailed information about the interface, but will never show me my external IP address over a NAT network. However, there are several websites, such as "What is my IP" that can get and show my external IP addres. So I'm wondering, if is possible to get this value externally, should I expect that there is some way to get this information from a command line at my local machine... I need to get this value to log on an application that I'm doing with VB Script. There is some way to do this, from a "cmd" on Windows?

    Read the article

  • How can I style the command being entered in a bash prompt?

    - by C4H5As
    While watching this intro video to Brunch, at about t=1:30 the command prompt being used has some very cool styles. The part I'm interested in is how the presenter managed to colour the text being entered on the prompt, while it's being entered. It looks like the first argument is coloured green when it becomes a valid executable command & purple when it's invalid. Successive arguments appear white, though it looks like a valid file path gets an underline (see ~ t=2:01). What's the trick here? Is this a custom terminal emulator? Is it some kind of magic $PS1?

    Read the article

  • Why are Linux-based operating systems considered safer than Windows?

    - by echoblaze
    I hear that Linux-based systems are better for security. Apparently they don't have viruses and do not need antivirus software. Even my university claims this - they refuse to have Windows on their servers, which is a real shame because we wanted to use the .NET framework to create some websites. The only reason I can see Linux being safer is because it's open-source, so bugs theoretically would get caught and fixed sooner. I know a bit about how operating systems work, but haven't really delved into how Linux and Windows implement their OS. Can someone explain the difference that makes Linux-based systems more secure?

    Read the article

  • How can I run the same Linux Installation on my hardware and in a virtual machine?

    - by LithMaster
    I've started some development that requires Linux (I'm currently on Ubuntu, but I may switch to Debian), but I still use Windows 7 for my day-to-day computing. I have already tried a dual-boot setup, but I've found that it is too cumbersome to switch between Linux and Windows. I'm wondering if it's possible to setup an installation of Linux (again, Ubuntu or Debian) on a partition of my hard drive that I can also run from Windows in a virtualized environment.

    Read the article

  • How to redirect the output of the vmrun listProcessesInGuest command on windows?

    - by mark
    I run vmrun.exe with listProcessesInGuest on the command line and get the list of processes displayed in the console window. The exact command line is: "C:\VIX\vmrun.exe" -T vc -h "https://myserver/sdk" -u "mydomain\myuser" -p 123 -gu Administrator -gp 123 listProcessesInGuest "[Storage1] QA-W-7-SP1-64-0/QA-W-7-SP1-64-0.vmx" It works fine. Now I wish to redirect the output, however, neither 2> nor 1> work! The former has no effect - the output is still displayed in the console window, so I conclude it is send to stdout. But the latter does not work too - now nothing is displayed in the console window, but the redirection file is empty! It is created all right, but it has the zero size! Can someone explain what is going on?

    Read the article

  • is there a small portable linux with good development environment?

    - by Sriram
    let me put it this way..! i use windows/ my company wants me to use windows i like Linux i don't want to use cygwin i want a simple portable Linux with a development environment aka( make,gcc,g++,llvm,...) with a bash and vi is enough for me no need any gui. these 4 points never change. ;) i tried damn small Linux.. its awesome but it doesn't have what i need. so is there a portable Linux distribution that i can run from windows using qemu or something with a good up2date development environment? thanks in advance

    Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >