Search Results

Search found 4343 results on 174 pages for 'man in the middle'.

Page 141/174 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• OpenGL Colour Interpolation

  - by Will-of-fortune

  I'm currently working on an little project in C++ and OpenGL and am trying to implement a colour selection tool similar to that in photoshop, as below. However I am having trouble with interpolation of the large square. Working on my desktop computer with a 8800 GTS the result was similar but the blending wasn't as smooth. This is the code I am using: GLfloat swatch[] = { 0,0,0, 1,1,1, mR,mG,mB, 0,0,0 }; GLint swatchVert[] = { 400,700, 400,500, 600,500, 600,700 }; glVertexPointer(2, GL_INT, 0, swatchVert); glColorPointer(3, GL_FLOAT, 0, swatch); glDrawArrays(GL_QUADS, 0, 4); Moving onto my laptop with Intel Graphics HD 3000, this result was even worse with no change in code. I thought it was OpenGL splitting the quad into two triangles, so I tried rendering using triangles and interpolating the colour in the middle of the square myself but it still doesnt quite match the result I was hoping for. Any help would be appreciated. Thanks.

  Read the article

• What are some typing patterns using a standard QWERTY keyboard that work well for you as a programme

  - by OrbMan

  After hunting and pecking for about 35 years, I have decided to learn to type. I am learning QWERTY and have learned about 2/3 of the letters so far. While learning, I have noticed how asymmeterical the keyboard is, which really bothers me. (I will probably switch to a symmetrical keyboard eventually, but for now am trying to do everything as standard and "correct" as possible.) Although I am not there yet in my lessons, it seems that many of the keys I am going to use as a C# web developer are supposed to be typed by the pinky of my right hand. Are there any typing patterns you have developed that are more ergonomic (or faster) when typing large volumes of code rife with braces, colons, semi-colons and quotes? Or, should I just accept the fact that every other key is going to be hit with my right pinky? It is not that speed is such a huge concern, as much as that it seems so inefficient to rely on one finger so much... As an example, some of the conventions I use as a hunt and pecker, like typing open and close braces right away with my index and middle finger, and then hitting the left arrow key to fill in the inner content, don't seem to work as well with just a pinky. What are some typing patterns using a standard QWERTY keyboard that work really well for you as a programmer? Update: US layout and I use home row Update 2: Despite my best efforts to the contrary, people are interpreting this questionas "how do I learn to type" or "what keyboard should I use". Take it as a given, that I will learn to type, and that I will be doing so on a standard QWERTY layout keyboard, not DVORAK. I am interested in aquiring a skill that will be useful wherever I go.

  Read the article

• ruby comma operator and step question

  - by ryan_m

  so, i'm trying to learn ruby by doing some project euler questions, and i've run into a couple things i can't explain, and the comma ?operator? is in the middle of both. i haven't been able to find good documentation for this, maybe i'm just not using the google as I should, but good ruby documentation seems a little sparse . . . 1: how do you describe how this is working? the first snippet is the ruby code i don't understand, the second is the code i wrote that does the same thing only after painstakingly tracing the first: #what is this doing? cur, nxt = nxt, cur + nxt #this, apparently, but how to describe the above? nxt = cur + nxt cur = nxt - cur 2: in the following example, how do you describe what the line with 'step' is doing? from what i can gather, the step command works like (range).step(step_size), but this seems to be doing (starting_point).step(ending_point, step_size). Am i right with this assumption? where do i find good doc of this? #/usr/share/doc/ruby1.9.1-examples/examples/sieve.rb # sieve of Eratosthenes max = Integer(ARGV.shift || 100) sieve = [] for i in 2 .. max sieve[i] = i end for i in 2 .. Math.sqrt(max) next unless sieve[i] (i*i).step(max, i) do |j| sieve[j] = nil end end puts sieve.compact.join(", ")

  Read the article

• How do I install the OpenSSL C++ library on Ubuntu?

  - by Daryl Spitzer

  I'm trying to build some code on Ubuntu 10.04 LTS that uses OpenSSL 1.0.0. When I run make, it invokes g++ with the "-lssl" option. The source includes: #include <openssl/bio.h> #include <openssl/buffer.h> #include <openssl/des.h> #include <openssl/evp.h> #include <openssl/pem.h> #include <openssl/rsa.h> I ran: $ sudo apt-get install openssl Reading package lists... Done Building dependency tree Reading state information... Done openssl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. But I guess the openssl package doesn't include the library. I get these errors on make: foo.cpp:21:25: error: openssl/bio.h: No such file or directory foo.cpp:22:28: error: openssl/buffer.h: No such file or directory foo.cpp:23:25: error: openssl/des.h: No such file or directory foo.cpp:24:25: error: openssl/evp.h: No such file or directory foo.cpp:25:25: error: openssl/pem.h: No such file or directory foo.cpp:26:25: error: openssl/rsa.h: No such file or directory How do I install the OpenSSL C++ library on Ubuntu 10.04 LTS? I did a man g++ and (under "Options for Linking") for the -l option it states: " The linker searches a standard list of directories for the library..." and "The directories searched include several standard system directories..." What are those standard system directories?

  Read the article

• JBoss deployment throws 'java.util.zip.ZipException: error in opening zip file' on Linux?

  - by Kaushalya

  I thought of posting both the question and the answer for others' knowledge. I deployed a large EAR (contained more than ~1024 jars/wars) on JBoss running with Java 6 on Linux, and the deployment process cried throwing the following exception: java.lang.RuntimeException: java.util.zip.ZipException: error in opening zip file) at org.jboss.deployment.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:53) at org.jboss.deployment.MainDeployer.init(MainDeployer.java:901) at org.jboss.deployment.MainDeployer.init(MainDeployer.java:895) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:809) at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:782) .... Caused by: java.lang.RuntimeException: java.util.zip.ZipException: error in opening zip file at org.jboss.util.file.JarArchiveBrowser.<init>(JarArchiveBrowser.java:74) at org.jboss.util.file.FileProtocolArchiveBrowserFactory.create(FileProtocolArchiveBrowserFactory.java:48) at org.jboss.util.file.ArchiveBrowser.getBrowser(ArchiveBrowser.java:57) at org.jboss.ejb3.EJB3Deployer.hasEjbAnnotation(EJB3Deployer.java:213) .... This was caused by the 'limit of number of open file descriptors' of Linux/Unix operating systems. The default is 1024. You can check the default value using: ulimit -n To increase the number of open file descriptors (say to 2048): ulimit -n 2048 Check the man page of ulimit for more details.

  Read the article

• Why do my raytraced spheres have dark lines when lit with multiple light sources?

  - by Curyous

  I have a simple raytracer that only works back up to the first intersection. The scene looks OK with two different light sources, but when both lights are in the scene, there are dark shadows where the lit area from one ends, even if in the middle of a lit area from the other light source (particularly noticeable on the green ball). The transition from the 'area lit by both light sources' to the 'area lit by just one light source' seems to be slightly darker than the 'area lit by just one light source'. The code where I'm adding the lighting effects is: // trace lights for ( int l=0; l<primitives.count; l++) { Primitive* p = [primitives objectAtIndex:l]; if (p.light) { Sphere * lightSource = (Sphere *)p; // calculate diffuse shading Vector3 *light = [[Vector3 alloc] init]; light.x = lightSource.centre.x - intersectionPoint.x; light.y = lightSource.centre.y - intersectionPoint.y; light.z = lightSource.centre.z - intersectionPoint.z; [light normalize]; Vector3 * normal = [[primitiveThatWasHit getNormalAt:intersectionPoint] retain]; if (primitiveThatWasHit.material.diffuse > 0) { float illumination = DOT(normal, light); if (illumination > 0) { float diff = illumination * primitiveThatWasHit.material.diffuse; // add diffuse component to ray color colour.red += diff * primitiveThatWasHit.material.colour.red * lightSource.material.colour.red; colour.blue += diff * primitiveThatWasHit.material.colour.blue * lightSource.material.colour.blue; colour.green += diff * primitiveThatWasHit.material.colour.green * lightSource.material.colour.green; } } [normal release]; [light release]; } } How can I make it look right?

  Read the article

• Concurrency and Coordination Runtime (CCR) Learning Resources

  - by Harry

  I have recently been learning the in's and out's of the Concurrency and Coordination Runtime (CCR). Finding good learning resources for this relatively new technology has been quite difficult. (A quick google search brings up "Creedence Clearwater Revival" as the top result!) Some of the resources I have found: Free e-book chapter from WROX on the Robotics Developer Studio Good Article/post on InfoQ Robotic's Member blog Very active MSDN CCR Forum - Got plenty of help from here! Great MSDN Magazine by Jeffrey Richter Official CCR User Guide - Didn't find this very helpful Great blogging series on CCR iodyner CCR Related Blog - Update: Moved to here Eight or so Videos on Channel9.msdn.com CCR Patterns page on MS Robotics Studio - I haven't read this yet 4 x CCR Questions on Stackoverflow - Most of the questions have been Mine! LOL CCR and DSS toolkit has now been released to MSDN Members Do you have any good learning resources for the CCR? I really hope that Microsoft will publish more material, so far it has been too Robotics specific. I believe that MS needs to acknowledge that most people are using the CCR in issolation from the DSS and Robotics Studio. Update The Mix 2010 conference had a presentation by Myspace about how they have used the CCR framework in their middle tier. They also open sourced the code base. MySpace DataRelay Mix Video Presentation

  Read the article

• html css header text

  - by JohnWong

  I am trying to move the nav text (home...) up in the middle to the right. But when I do -120px for the top (nav.li), it eats up part of the banner. How can I fix that? Thanks body { background-color: #D6E2FF; } #headerimg { margin: 10px 0px 0px 0px; height: fixed; width: 95%; } #header { height:auto; background:url("menubar.jpg") no-repeat; } #logo { background: transparent url("logo.jpg") no-repeat; display: block; width: 146px; height: 146px; border: none; } #navcontainer { font-size: 200%; margin: -100px 0px 0px 500px; } #navlist li { display: inline; list-style-type: none; padding-right: 30px; color: #FFFFFF; }

  Read the article

• Passing variables from a thread to another form using C#

  - by kirstom14

  Hi, I am trying to pass 2 variables from a thread, in the MainForm, to another form, but when doing so an error occurs. private void TrackingThread( ) { float targetX = 0; float targetY = 0; while ( true ) { camera1Acquired.WaitOne( ); camera2Acquired.WaitOne( ); lock ( this ) { // stop the thread if it was signaled if ( ( x1 == -1 ) && ( y1 == -1 ) && ( x2 == -1 ) && ( y2 == -1 ) ) { break; } // get middle point targetX = ( x1 + x2 ) / 2; targetY = ( y1 + y2 ) / 2; } if (directionForm != null) { directionForm.RunMotors(targetX, targetY); } } } In the form, directionForm, I am simply displaying the variables targetX and targetY. The code for the directionForm.RunMotors() is the following: public void RunMotors(float x, float y) { label1.Text = "X-ordinate " + x.ToString(); label2.Text = "Y-ordinate " + y.ToString(); } The error happen when I am trying to display the two variables: "InvalidOperationException was unhandled Cross-threading operation not valid: Control label1 accessed from a thread other than . the thread it was created on" What shall I do??? Thanks in advance

  Read the article

• Classic ASP - Email form with attached file - please help

  - by apg1985

  Hi Guys, Ive got abit of a problem ive got an email web form that send the input to an email address but what I now need is a file input field were the user can also send an image as an attachment. So contact name, logo (attachment). Ive been told in order to send the attachment it needs to be saved in a folder on my hosting before it can be sent. Ive spoken to the hosting company and they dont have anything in place to make this easier such as aspupload. In the form name="contactname" and name="logo" I have a folder in the root directory called logos (this asp page also exists in the root directory) Man I hope someone can help me spent along time looking for answers Dim contactname, logo contactname = request.form("contactname") If request("contactname") <> "" THEN Set myMail=CreateObject("CDO.Message") myMail.Subject="Form" myMail.From="web@email" myMail.To="web@email" myMail.HTMLBody = "" & contactname & "" myMail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 myMail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "relay.host" myMail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25 myMail.Configuration.Fields.Update myMail.Send set myMail=nothing

  Read the article

• How to create extensible dynamic array in Java without using pre-made classes?

  - by AndrejaKo

  Yeah, it's a homework question, so givemetehkodezplsthx! :) Anyway, here's what I need to do: I need to have a class which will have among its attributes array of objects of another class. The proper way to do this in my opinion would be to use something like LinkedList, Vector or similar. Unfortunately, last time I did that, I got fire and brimstone from my professor, because according to his belief I was using advanced stuff without understanding basics. Now next obvious solution would be to create array with fixed number of elements and add checks to get and set which will see if the array is full. If it is full, they'd create new bigger array, copy older array's data to the new array and return the new array to the caller. If it's mostly empty, they'd create new smaller array and move data from old array to new. To me this looks a bit stupid. For my homework, there probably won't be more that 3 elements in an array, but I'd like to make a scalable solution without manually calculating statistics about how often is array filled, what is the average number of new elements added, then using results of calculation to calculate number of elements in new array and so on. By the way, there is no need to remove elements from the middle of the array. Any tips?

  Read the article

• Quartz 2D or OpenGL ES? Pros and cons in the long term, possibility of migration to other platforms.

  - by fspirit

  Hi all! I'm having a hard time deciding whether to go with Quartz2D or OpenGL for an iPad game. It will be 2D mostly, but effect-intense (simultaneous lighting effects for 10-30 objects, 10-20 simultaneous animations on the screen). So far, assuming i'm equally dumb in both technologies and have to learn them from the ground, i came to this list. (I've read several topics here, on SO, with names like "Quartz or OpenGL", but i'm still left with some questions) Quartz: Better time-to-market, because of ready to use absractions like UIView, UIImageView, CoreAnimation abstractions Open GL ES Closer to hardware, thus, performance is better. App, implemented with OpenGL ES can be easier migrated to Android, MeeGo, Windows Phone, etc. My questions are: How time will it take to rewrite Quartz 2d app to use OpenGL? Lets say it took me 2 man-month to write Quartz app, how much time will i need to rewrite it? (Please, just some subjective opinions, i'll try to summarize them somehow) Regarding the ease of migration to other platforms, when using OpenGL, is it really so? Or efforts when migrating Quartz app from iPhoneOS to Android will be not so much bigger, compared to OpenGL app migration? (Ease of migration is quite important criterion) Regarding OpenGL, should i go with OpenGL 1.1 or 2.0, concerning migration? (Android supports 2.0 through NDK, but dont know whether NDK's use will increase or decrease migration efforts)

  Read the article

• JavaScript: Achieving precise animation end values?

  - by bobthabuilda

  I'm currently trying to write my own JavaScript library. I'm in the middle of writing an animation callback, but I'm having trouble getting precise end values, especially when animation duration times are smaller. Right now, I'm only targeting positional animation (left, top, right, bottom). When my animations complete, they end up having an error margin of 5px~ on faster animations, and 0.5px~ on animations 1000+ ms or greater. Here's the bulk of the callback, with notes following. var current = parseFloat( this[0].style[prop] || 0 ) // If our target value is greater than the current , gt = !!( value > current ) , delta = ( Math.abs(current - value) / (duration / 13) ) * (gt ? 1 : -1) , elem = this[0] , anim = setInterval( function(){ elem.style[prop] = ( current + delta ) + 'px'; current = parseFloat( elem.style[prop] ); if ( gt && current >= value || !gt && current <= value ) clearInterval( anim ); }, 13 ); this[0] and elem both reference the target DOM element. prop references the property to animate, left, top, bottom, right, etc. current is the current value of the DOM element's property. value is the desired value to animate to. duration is the specified duration (in ms) that the animation should last. 13 is the setInterval delay (which should roughly be the absolute minimal for all browsers). gt is a var that is true if value exceeds the initial current, else it is false. How can I resolve the error margin?

  Read the article

• How to interrupt a thread performing a blocking socket connect?

  - by Jason R

  I have some code that spawns a pthread that attempts to maintain a socket connection to a remote host. If the connection is ever lost, it attempts to reconnect using a blocking connect() call on its socket. Since the code runs in a separate thread, I don't really care about the fact that it uses the synchronous socket API. That is, until it comes time for my application to exit. I would like to perform some semblance of an orderly shutdown, so I use thread synchronization primitives to wake up the thread and signal for it to exit, then perform a pthread_join() on the thread to wait for it to complete. This works great, unless the thread is in the middle of a connect() call when I command the shutdown. In that case, I have to wait for the connect to time out, which could be a long time. This makes the application appear to take a long time to shut down. What I would like to do is to interrupt the call to connect() in some way. After the call returns, the thread will notice my exit signal and shut down cleanly. Since connect() is a system call, I thought that I might be able to intentionally interrupt it using a signal (thus making the call return EINTR), but I'm not sure if this is a robust method in a POSIX threads environment. Does anyone have any recommendations on how to do this, either using signals or via some other method? As a note, the connect() call is down in some library code that I cannot modify, so changing to a non-blocking socket is not an option.

  Read the article

• Falling Sand simulation

  - by Erik Forbes

  I'm trying to re-create a 'falling sand' simulation, similar to those various web toys that are out there doing the same thing - and I'm failing pretty hard. I'm not really sure where to begin. I'm trying to use cellular automata to model the behavior of the sand particles, but I'm having trouble figuring out how to make the direction in which I update the 'world' not matter... For example, one of the particle types I'd like to have is Plant. When Plant comes in contact with Water, Plant turns that Water particle into another Plant particle. The problem here though is that if I'm updating the game world from top to bottom and left to right, then a Plant particle placed in the middle of a sea of Water particles will immediately cause all of the Water particles to the right and below that new Plant particle to turn into Plants. This is not the behavior I am expecting. =( I'm having difficulty explaining exactly my difficulty, so I'll try to add more information as best I can as I go along. Suffice it to say that this is very much outside my box, as it were, and I don't even know what to search for.

  Read the article

• Show progress during a long Ajax call

  - by kousen

  I have a simple web site (http://www.kousenit.com/twitterfollowervalue) that computes a quantity based on a person's Twitter followers. Since the Twitter API only returns followers 100 at a time, a complete process may involve lots of calls. At the moment, I have an Ajax call to a method that runs the Twitter loop. The method looks like (Groovy): def updateFollowers() { def slurper = new XmlSlurper() followers = [] def next = -1 while (next) { def url = "http://api.twitter.com/1/statuses/followers.xml?id=$id&cursor=$next" def response = slurper.parse(url) response.users.user.each { u -> followers << new TwitterUser(... process data ...) } next = response.next_cursor.toBigInteger() } return followers } This is invoked from a controller called renderTTFV.groovy. I call the controller via an Ajax call using the prototype library: On my web page, in the header section (JavaScript): function displayTTFV() { new Ajax.Updater('ttfv','renderTTFV.groovy', {}); } and there's a div in the body of the page that updates when the call is complete. Everything is working, but the updateFollowers method can take a fair amount of time. Is there some way I could return a progress value? For example, I'd like to update the web page on every iteration. I know ahead of time how many iterations there will be. I just can't figure out a way to update the page in the middle of that loop. Any suggestions would be appreciated.

  Read the article

• Find out which row caused the error

  - by Felipe Fiali

  I have a big fat query that's written dynamically to integrate some data. Basically what it does is query some tables, join some other ones, treat some data, and then insert it into a final table. The problem is that there's too much data, and we can't really trust the sources, because there could be some errored or inconsistent data. For example, I've spent almost an hour looking for an error while developing using a customer's database because somewhere in the middle of my big fat query there was an error converting some varchar to datetime. It turned out to be that they had some sales dating '2009-02-29', an out-of-range date. And yes, I know. Why was that stored as varchar? Well, the source database has 3 columns for dates, 'Month', 'Day' and 'Year'. I have no idea why it's like that, but still, it is. But how the hell would I treat that, if the source is not trustable? I can't HANDLE exceptions, I really need that it comes up to another level with the original message, but I wanted to provide some more info, so that the user could at least try to solve it before calling us. So I thought about displaying to the user the row number, or some ID that would at least give him some idea of what record he'd have to correct. That's also a hard job because there will be times when the integration will run up to 80000 records. And in an 80000 records integration, a single dummy error message: 'The conversion of a varchar data type to a datetime data type resulted in an out-of-range datetime value' means nothing at all. So any idea would be appreciated. Oh I'm using SQL Server 2005 with Service Pack 3.

  Read the article

• ASP Menu driving me insane

  - by simplesimon

  Hi there, I am trying to create a menu using ASP (I have never used ASP before, im a PHP man) using values stored in a database. basically the html layout i want is as such: <ul> <li> <ul class="sub-menu"> <li class="sub-menu-li">Test</li> </ul> </li> </ul> I need to loop around the root menu items rs("AD_Level") which is equal to 0 for root objects, then inside that loop, lop around anything that has the same parent id eg if the current record is AD_Level =0 and AD_Parent=5 then loop around all items with AD_Parent 5 and AD_Level != 0 and insert the values into html and so on and so forth. Please help! I am struggling with a new language and cannot see a way to do this without losing sanity Edit (Extracted from Comment by OP) while not rsAdmin.eof sPar = rsAdmin("ad_parent" if rsAdmin("AD_Level")=0 then while not rsAdmin2.eof if rsAdmin2("AD_Level")<>0 and rsAdmin2("ad_parent")=sPar and rsAdmin2("AD_Sec_Level")=>2 then response.write rsAdmin("AD_Menu") end if rsAdmin2.movenext wend end if '' # if not rsAdmin.eof then sPar=rsAdmin("AD_parent") rsAdmin.movenext wend that is my code

  Read the article

• Do you use Styrofoam balls to model your systems?

  - by Nick D

  [Objective-C] Do you still use Styrofoam balls to model your systems, where each ball represents a class? Tom Love: We do, actually. We've also done a 3D animation version of it, which we found to be nowhere near as useful as the Styrofoam balls. There's something about a physical, conspicuous structure hanging from the ceiling right in the middle of a development project that's regularly updated to provide not only the structure of the system that you're building, but also the current status of each one of the classes. We've done it on 19 projects the last time I've counted. One of them was 1,856 classes, which is big - actually, probably bigger than it should be. It was a big commercial project, so it needed to be somewhat big. Masterminds of Programming It is the first time I've read or heard about using styrofoam balls to model classes. Is that a commonly used technique? And, how does that sort of modeling help us to design better the system? If you have any photos to share which can show us how the classes are represented it'd be great!

  Read the article

• Service Bus / Request Forwarding

  - by codputer

  I'm doing some development with a thrid party that issues either a Get or POST to a public URL that I specify. What I would like to do is set up a Relay service on the Azure Service Bus that my dev machine can listen to. When the request comes in, I want to forward that request as if my web service was taking the request directly from the thrid party service. When I'm ready, I'll deploy the application to a public service, change the URL that the thrid party service is sending too, and viola I should be up and running. What I'm looking for looks exactly like this: Clemens the Master of Service Bus but it's from the 2009 CTP. I'm working at it, but haven't yet got it working using all the new bits in 2012 (a.ka. its over my head at the moment). Somebody want to help? Clemens also help somebody else create a Reverse Proxy using the Service Bus, but I can't seem to find it. Yes I've also tweeted Clemens, but I'm sure he is a busy man! p.s. I know about Application Request Routing, but my dev machine is not on a public URL, I need to rewrite the URL after my client listener on the service bus recieves the message that was relayed from the Server side endpoint.

  Read the article

• Are Fortran control characters (carriage control) still implemented in compilers?

  - by CmdrGuard

  In the book Fortran 95/2003 for Scientists and Engineers, there is much talk given to the importance of recognizing that the first column in a format statement is reserved for control characters. I've also seen control characters referred to as carriage control on the internet. To avoid confusion, by control characters, I refer to the characters "1, a blank (i.e. \s), 0, and +" as having an effect on the vertical spacing of output when placed in the first column (character) of a FORMAT statement. Also, see this text-only web page written entirely in fixed-width typeface : Fortran carriage-control (because nothing screams accuracy and antiquity better than prose in monospaced font). I found this page and others like it to be not quite clear. According to Fortran 95/2003 for Scientists and Engineers, failure to recall that the first column is reserved for carriage control can lead to horrible unintended output. Paraphrasing Dave Barry, type the wrong character, and nuclear missiles get fired at Norway. However, when I attempt to adhere to this stern warning, I find that gfortran has no idea what I'm talking about. Allow me to illustrate my point with some example code. I am trying to print out the number Pi: PROGRAM test_format IMPLICIT NONE REAL :: PI = 2 * ACOS(0.0) WRITE (*, 100) PI WRITE (*, 200) PI WRITE (*, 300) PI 100 FORMAT ('1', "New page: ", F11.9) 200 FORMAT (' ', "Single Space: ", F11.9) 300 FORMAT ('0', "Double Space: ", F11.9) END PROGRAM test_format This is the output: 1New page: 3.141592741 Single Space: 3.141592741 0Double Space: 3.141592741 The "1" and "0" are not typos. It appears that gfortran is completely ignoring the control character column. My question, then, is this: Are control characters still implemented in standards compliant compilers or is gfortran simply not standards compliant? For clarity, here is the output of my gfortran -v Using built-in specs. Target: powerpc-apple-darwin9 Configured with: ../gcc-4.4.0/configure --prefix=/sw --prefix=/sw/lib/gcc4.4 --mandir=/sw/share/man --infodir=/sw/share/info --enable-languages=c,c++,fortran,objc,java --with-gmp=/sw --with-libiconv-prefix=/sw --with-ppl=/sw --with-cloog=/sw --with-system-zlib --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib --disable-libjava-multilib --build=powerpc-apple-darwin9 --host=powerpc-apple-darwin9 --target=powerpc-apple-darwin9 Thread model: posix gcc version 4.4.0 (GCC)

  Read the article

• APC values randomly disappear

  - by Michael

  I'm using APC for storing a map of class names to class file paths. I build the map like this in my autoload function: $class_paths = apc_fetch('class_paths'); // If the class path is stored in application cache - search finished. if (isset($class_paths[$class])) { return require_once $class_paths[$class]; // Otherwise search in known places } else { // List of places to look for class $paths = array( '/src/', '/modules/', '/libs/', ); // Search directories and store path in cache if found. foreach ($paths as $path) { $file = DOC_ROOT . $path . $class . '.php'; if (file_exists($file)) { echo 'File was found in => ' . $file . '<br />'; $class_paths[$class] = $file; apc_store('class_paths', $class_paths); return require_once $file; } } } I can see as more and more classes are loaded, they are added to the map, but at some point the apc_fetch returns NULL in the middle of a page request, instead of returning the map. Getting => class_paths Array ( [MCS\CMS\Helper\LayoutHelper] => /Users/mbl/Documents/Projects/mcs_ibob/core/trunk/src/MCS/CMS/Helper/LayoutHelper.php [MCS\CMS\Model\Spot] => /Users/mbl/Documents/Projects/mcs_ibob/core/trunk/src/MCS/CMS/Model/Spot.php ) Getting => class_paths {null} Many times the cached value will also be gone between page requests. What could be the reason for this? I'm using APC as an extension (PECL) running PHP 5.3.

  Read the article

• What is the best approach for creating a Common Information Model?

  - by Kaiser Advisor

  Hi, I would like to know the best approach to create a Common Information Model. Just to be clear, I've also heard it referred to as a canonical information model, semantic information model, and master data model - As far as I can tell, they are all referring to the same concept. I've heard in the past that a combined "top-down" and "bottom-up" approach is best. This has the advantage of incorporating "Ivory tower" architects and developers - The work will meet somewhere in the middle and usually be both logical and practical. However, this involves bringing in a lot of people with different skill sets. I've also seen a couple of references to the Distributed Management Task Force, but I can't glean much on best practices in terms of CIM development. This is something I'm quite interested in getting some feedback on since having a strong CIM is a prerequisite to SOA. Thanks for your help! KA Update I've heard another strategy goes along with overall SOA implementation: Get the business involved, and seek executive sponsorship. This would be part of the "Top-down" effort.

  Read the article

• Can I rename LOCAL, REMOTE and BASE as used in git mergetool?

  - by carleeto

  Lets say I'm doing a rebase B of a branch onto master and there's a conflict. git opens up the default merge tool with 3 files as input : file.LOCAL, file.BASE, file.REMOTE (they're named a little differently, but LOCAL, BASE and REMOTE are in the file names and is how they are distinguished). Now, according to the mergetool man page: $LOCAL is set to the name of a temporary file containing the contents of the file on the current branch; $REMOTE set to the name of a temporary file containing the contents of the file to be merged, and $BASE set to the name of a temporary file containing the common base for the merge. That really does not make sense to me. LOCAL is the current state of the branch. Where I get lost is BASE and REMOTE. So my question is : Is it possible to make git use the branch name instead of LOCAL and similarly more meaningful names other than BASE and REMOTE? For example, if the branch name is FeatureX and the BASE = the file as it exists in master, is there a way to get git to substitute FeatureX for LOCAL and master for BASE, so that it is more apparent where the source is coming from? This is especially a problem when doing a rebase.

  Read the article

• How can I ceil the height of a div that has "display: table-cell"?

  - by eric01

  I am trying to vertically center a div inside another div, regardless of the size of both div's I am doing this: <div id='outer_div'> <div id='inner_div'></div> </div> The CSS is #outer_div { display: table-row; height: 200px; width: 200px } #inner_div { display: table-cell; vertical-align: middle; height: 500px; width: 500px } I put larger dimensions for the inner div on purpose. What happens is that even if I put a width of 1000px, the width of the innerdiv is ceiled at 200px because of the outer div's width (and this is what I want) But for the height, it is not ceiled and I would like it to be ceiled to the height of the outer div. What i want is the innerdiv to remain at the same size as the outer_div, no matter what height I give to outer_div in CSS. I basically want it to be the same size as its parent. EDIT: I only put text inside those div's. So let's say I have an outer div of 200px*200px (it has display: table-row), and the inner div is defined by css as 500px*500px and it has dummy text inside. My expected result is to have the inner div shrunk down to 200px*200px. It is successfully 'shrunk' by the outer div for the width, but NOT for the height. What I want is to have it shrunk on the height as well (so the inner div ajusts automatically in case I change the height of the outer div) How do I go about that?

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >