Search Results

Search found 6735 results on 270 pages for 'pre commit'.

Page 142/270 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Websphere Scheduler

  - by Dileep81

  Websphere Scheduler is using scheduler datasource XA driver . When task is executed by scheduler it is starting a global transaction, but in our application we are creating a new connection to another database and explicitly commiting the data and closing the connection. This data source configured using non-XA driver datasource. For the application we have also enabled the Accept heuristic hazard (Last participant support extension) . Now while running the scheudler we are getting the exception DSRA9350E: Operation Connection.commit is not allowed during a global transaction . Can any one help me out in this

  Read the article

• Msdtc Transaction

  - by Shimjith

  I am using Linked server For Tansaction example Alter Proc [dbo].[usp_Select_TransferingDatasFromServerCheckingforExample] @RserverName varchar(100), ----- Server Name @RUserid Varchar(100), ----- server user id @RPass Varchar(100), ----- Server Password @DbName varchar(100) ----- Server database As Set nocount on Set Xact_abort on Declare @user varchar(100) Declare @userID varchar(100) Declare @Db Varchar(100) Declare @Lserver varchar(100) Select @Lserver = @@servername Select @userID = suser_name() select @User=user Exec('if exists(Select 1 From [Master].[' + @user + '].[sysservers] where srvname = ''' + @RserverName + ''') begin Exec sp_droplinkedsrvlogin ''' + @RserverName + ''',''' + @userID + ''' exec sp_dropserver ''' + @RserverName + ''' end ') set @RserverName='['+@RserverName+']' BEGIN TRY BEGIN TRANSACTION declare @ColumnList varchar(max) set @ColumnList = null select @ColumnList = case when @ColumnList is not null then @ColumnList + ',' + quotename(name) else quotename(name) end from syscolumns where id = object_id('bditm') order by colid set identity_insert Bditm on exec ('Insert Into Bditm ('+ @ColumnList +') Select * From '+ @RserverName + '.'+ @DbName + '.'+ @user + '.Bditm') set identity_insert Bditm off Commit Select 1 End try Begin catch if (@@ERROR < 0) Begin if @@trancount 0 Begin Rollback transaction Select 0 END End End Catch set @RserverName=replace(replace(@RserverName,'[',''),']','') Exec sp_droplinkedsrvlogin @RserverName,@userID Exec sp_dropserver @RserverName this is the Error Occuerd The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.

  Read the article

• Update website with a single command (git push) instead of FTP drag and dropping

  - by Wolfr

  Situation: I have a local copy of a website I have a server that I have SSH access to What do I want to do? Commit locally until I'm happy with my code Make branches locally Have one master branch that is the one that should be pushed to the server Update the website using a single command (git push origin master) If I set up a git repo locally using git init, and then push to a folder on the server, it doesn't work. When I FTP to the server to check the files, they're actually there. When I SSH into the server and do git status, it's not clean, even though it should be since I just pushed to the server. Steps I'm doing: Make a new folder on my computer (mkdir folder_x) Go into that folder (cd folder_x) Set up a new git repository there (git init) (git repository sets up successfully) Push the repository to the server using git push origin master (where origin is set up as user:[email protected])

  Read the article

• How do I push a new project to a shared Mercurial multi-repository?

  - by j-g-faustus

  I have a local machine ("laptop") and a shared Mercurial repository on another machine ("server"). The shared repository is set up as a multi-repository as described in the Mercurial documentation using Apache, the hgwebdir.cgi script and Mercurial 1.4. The setup works in the sense that I can browse the projects (repositories) in the web browser, I can clone and pull from the server, and I can push from the laptop when the project/repository already exists on the server. But I cannot create a new project on the laptop (hg init, do stuff, hg commit) and push it to the shared multi-repository (hg push http://server/hg/my-new-project-name) - I get "abort: HTTP Error 404: Not Found", presumably because the directory/project repository does not exist yet. How can I push a new project/directory structure to a Mercurial running elsewhere? I couldn't find anything in the documentation, how do you guys do it?

  Read the article

• Proper upstart script for hamachi?

  - by ALQ

  I've been looking for a script to supervise hamachi and mostly got it to work except for the part that daemonizes hamachid. The following script works but is not perfect. I'm not familiar with upstart internals to debug this further. description "Hamachi VPN" author "Alexis Le-Quoc <[email protected]>" start on (net-device-up and local-filesystems and runlevel [2345]) stop on runlevel [016] respawn oom never env DAEMON=/opt/logmein-hamachi/bin/hamachid pre-start script [ -x "$DAEMON" ] end script # should really be: # expect daemon # exec $DAEMON exec $DAEMON debug > /dev/null

  Read the article

• Which AMI should I use as a base for a Django application?

  - by Edan Maor

  I'm starting development of a Django application, on Amazon's Web Services. I'm looking to build an instance that will serve the Django. I don't have much experience with such things, having only used a shared host before (WebFaction). So I'm wondering, which AMI should I use as a base? I'm assuming I want an Ubuntu AMI, possibly with certain things like Apache pre-installed? One minor point: I'm planning to serve several different Django projects from the same instance. I use virtualenv on my dev machine right now to separate the different projects, I'm assuming I'll do the same on EC2. Thanks!

  Read the article

• iPhone app crashed: Assertion failed function evict_glyph_entry_from_strike, file Fonts/CGFontCache.

  - by Ross

  this happened quite randomly. I didn't delete any tableview cell, the backtrace information: Assertion failed: (d->entry[identifier.glyph] == g), function evict_glyph_entry_from_strike, file Fonts/CGFontCache.c, line 810. Program received signal: “SIGABRT”. (gdb) bt #0 0x97da5972 in __kill () #1 0x97da5964 in kill$UNIX2003 () #2 0x97e38ba5 in raise () #3 0x97e4ec5c in abort () #4 0x97e3b804 in __assert_rtn () #5 0x0037fe0e in evict_glyph_entry_from_cache () #6 0x003226aa in expire_glyphs_nl () #7 0x00322645 in CGFontCacheUnlock () #8 0x00321fef in CGGlyphLockUnlock () #9 0x0240f9b7 in ripc_DrawGlyphs () #10 0x0031b0d4 in draw_glyphs () #11 0x0031a91f in CGContextShowGlyphsWithAdvances () #12 0x35814178 in WebCore::Font::drawGlyphs () #13 0x35813da5 in WebCore::Font::drawGlyphBuffer () #14 0x35813aca in WebCore::Font::drawSimpleText () #15 0x35813760 in drawAtPoint () #16 0x3581307e in -[NSString(WebStringDrawing) _web_drawAtPoint:forWidth:withFont:ellipsis:letterSpacing:includeEmoji:] () #17 0x3090d2e9 in -[NSString(UIStringDrawing) drawAtPoint:forWidth:withFont:lineBreakMode:letterSpacing:includeEmoji:] () #18 0x3090cfe3 in -[NSString(UIStringDrawing) drawAtPoint:forWidth:withFont:lineBreakMode:] () #19 0x3093d853 in -[UINavigationItemView drawText:inRect:] () #20 0x3093a96b in -[UINavigationItemButtonView drawRect:] () #21 0x3091ff61 in -[UIView(CALayerDelegate) drawLayer:inContext:] () #22 0x0060daeb in -[CALayer drawInContext:] () #23 0x0060d8f9 in backing_callback () #24 0x0060d1b4 in CABackingStoreUpdate () #25 0x0060c3cc in -[CALayer _display] () #26 0x0060bf56 in CALayerDisplayIfNeeded () #27 0x0060b3bd in CA::Context::commit_transaction () #28 0x0060b022 in CA::Transaction::commit () #29 0x006132e0 in CA::Transaction::observer_callback () #30 0x30245c32 in __CFRunLoopDoObservers () #31 0x3024503f in CFRunLoopRunSpecific () #32 0x30244628 in CFRunLoopRunInMode () #33 0x32044c31 in GSEventRunModal () #34 0x32044cf6 in GSEventRun () #35 0x309021ee in UIApplicationMain ()

  Read the article

• How do I create a solr core with the data from an existing one?

  - by steve_d

  Solr 1.4 Enterprise Search Server recommends doing large updates on a copy of the core, and then swapping it in for the main core. I am following these steps: Create prep core: http://localhost:8983/solr/admin/cores?action=CREATE&name=prep&instanceDir=main Perform index update, then commit/optimize on prep core. Swap main and prep core: http://localhost:8983/solr/admin/cores?action=SWAP&core=main&other=prep Unload prep core: http://localhost:8983/solr/admin/cores?action=UNLOAD&core=prep The problem I am having is, the core created in step 1 doesn't have any data in it. If I am going to do a full index of everything and the kitchen sink, that would be fine, but if I just want to update a (large) subset of the documents - that's obviously not going to work. (I could merge the cores, but part of what I'm trying to do is get rid of any deleted documents without trying to make a list of them.) Is there some flag to the CREATE action that I'm missing? The Solr Wiki page for CoreAdmin is a little sparse on details.

  Read the article

• Does a C# using statement perform try/finally?

  - by Lirik

  Suppose that I have the following code: private void UpdateDB(QuoteDataSet dataSet, Strint tableName) { using(SQLiteConnection conn = new SQLiteConnection(_connectionString)) { conn.Open(); using (SQLiteTransaction transaction = conn.BeginTransaction()) { using (SQLiteCommand cmd = new SQLiteCommand("SELECT * FROM " + tableName, conn)) { using (SQLiteDataAdapter sqliteAdapter = new SQLiteDataAdapter()) { sqliteAdapter.Update(dataSet, tableName); } } transaction.Commit(); } } } The C# documentation states that with a using statement the object within the scope will be disposed and I've seen several places where it's suggested that we don't need to use try/finally clause. I usually surround my connections with a try/finally, and I always close the connection in the finally clause. Given the above code, is it reasonable to assume that the connection will be closed if there is an exception?

  Read the article

• VirtualBox, physical disks, and snapshots

  - by noamtm

  I have an Ubuntu guest installed on a raw HDD (entire disk, not a partition). It runs just fine under WinXP. In addition, I was able to boot directly into it (using the BIOS boot-device selector). At some point, I have created a snapshot of the VM. I have made some changes since then. Today, after a long time, I tried booting into the "VM" disk. It worked, but all the data there is pre-snapshot (or, rather, frozen at the snapshot). Can I somehow merge the changes since I took the snapshot into the physical state?

  Read the article

• GUID Partition Table & Linux

  - by Zac

  (1) Is it true that the new GUID Partition Table scheme allows a user to partition a drive however he/she like, outside of the traditional MBR "4 primaries or 3 primaries + 1 extension" paradigm? If so, are there any limitations to the GPT? If my assumption is wrong, what are its advantages over the MBR model? (2) I'm getting a new laptop this week and will be installing Ubuntu (and, more generally, Linux) for the first time ever. Does Ubunutu come pre-configured with MBR as a default? If so, how do I get Ubuntu w/ GPT? If not, how do I specify GPT over MBR? Thanks!

  Read the article

• Inserting the record into Data Base through JPA

  - by vinay123

  In my code I am using JSF - Front end , EJB-Middile Tier and JPA connect to DB.Calling the EJB using the Webservices.Using MySQL as DAtabase. I have created the Voter table in which I need to insert the record. I ma passing the values from the JSF to EJB, it is working.I have created JPA controller class (which automatcally generates the persistence code based on the data base classes) Ex: getting the entity manager etc., em = getEntityManager(); em.getTransaction().begin(); em.persist(voter); em.getTransaction().commit(); I have created the named query also: @NamedQuery(name = "Voter.insertRecord", query = "INSERT INTO Voter v values v.voterID = :voterID,v.password = :password,v.partSSN = :partSSN,v.address = :address, v.zipCode = :zipCode,v.ssn = :ssn, v.vFirstName = :vFirstName,v.vLastName = :vLastName,v.dob = :dob"),But still not able to insert the record? Can anyone help me in inserting the record into the Data base through JPA.(Persistence object)?

  Read the article

• How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

  - by chrisling106

  Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

  Read the article

• how to automatically accept license with mounting mac osx .dmg files from command line?

  - by Vitaly Kushner

  Im automating my mac installation using 'puppet'. as a part of it I need to install several programs that come in a .dmg format. I use the following to mount them: sudo /usr/bin/hdiutil mount -plist -nobrowse -readonly -quiet -mountrandom /tmp Program.dmg The problem is that some .dmg files come with a license attached, and so script is stuck accepting the license. (there is no stdin/out when running with puppet, so I can't manually approve it to continue). Is there a way to pre-approve or force-approve the license?

  Read the article

• WIX C++ Custom Action

  - by Adrian Faciu

  Hi, I have a basic WIX custom action: UINT __stdcall MyCustomAction(MSIHANDLE hInstaller) { DWORD dwSize=0; MsiGetProperty(hInstaller, TEXT("MyProperty"), TEXT(""), &dwSize); return ERROR_SUCCESS; } Added to the installer: <CustomAction Id="CustomActionId" FileKey="CustomDll" DllEntry="MyCustomAction"/> <InstallExecuteSequence> <Custom Action="CustomActionId" Before="InstallFinalize" /> </InstallExecuteSequence> The problem is that, no matter what i do, the handle hInstaller is not valid. I've set the action to commit, deferred, changed the place in InstallExecute sequence, hInstaller is always not valid. Any help would be appreciated. Thanks.

  Read the article

• Preview result of update/insert query whithout comitting changes to database in MySQL?

  - by Camsoft

  I am writing a script to import CSV files into existing tables within my database. I decided to do the insert/update operations myself using PHP and INSERT/UPDATE statements, and not use MySQL's LOAD INFILE command, I have good reasons for this. What I would like to do is emulate the insert/update operations and display the results to the user, and then give them the option of confirming that this is OK, and then committing the changes to the database. I'm using InnoDB database engine with support for transactions. Not sure if this helps but was thinking down the line of insert/update, query data, display to user, then either commit or rollback transaction? Any advise would be appreciated.

  Read the article

• Can a device (WAP or switch) be configured as an 802.1x supplicant?

  - by Allan Ross

  We are looking at implementing 802.1x on a wired/wireless network. What I am looking for is a device that can act as a supplicant and once authenticated on the network, is able to pass traffic from any downstream connected device. The point of doing this would be to allow a properly pre-configured device to be provided to a client user who could then connect any device on the downstream side of the device. We will be able to manage the aggregate traffic on the device without concern for what is connected on the far side. Am I dreaming; does every device out there support this and I just don't know it or is reality fall somewhere in the middle?

  Read the article

• MySQL - are FK's useful / viable in a web app?

  - by yoda

  Hi all, I've encountered this discussion related to FK's and web applications. Basically some people say that FK's in web applications doesn't represent a real improvement and can even make the application slower in some cases. What do you guys think, what's your experience? -- A quote from Heikki Tuuri, creator of InnoDB engine, founder and CEO of Innobase: InnoDB checks foreign keys as soon as a row is updated, no batching is performed or checks delayed till transaction commit Foreign keys are often serious performance overhead, but help maintain data consistency Foreign Keys increase amount of row level locking done and can make it spread to a lot of tables besides the ones directly updated

  Read the article

• Facebook PHP SDK - will not logout properly

  - by garethdn

  I've been searching for hours for the solution to this problem but can't find one that works for me. When i click "Logout" on my site the user information is still visible and the logout button is still displayed. Here is the code: require 'facebook-php-sdk/src/facebook.php'; $facebook = new Facebook(array( 'appId' => 'xxxx', 'secret' => 'xxxx', )); // Get User ID $user = $facebook->getUser(); var_dump($user); if ($user) { try { // Proceed knowing you have a logged in user who's authenticated. $user_profile = $facebook->api('/me'); } catch (FacebookApiException $e) { error_log($e); $user = null; } } // Login or logout url will be needed depending on current user state. if ($_GET['logout'] == "yes") { setcookie('fbs_'.$facebook->getAppId(), '', time()-100, '/', 'http://gno.....ment/index.php'); session_destroy(); header("Location: ".$_SERVER['PHP_SELF'].""); } if ($user_profile) { $logoutUrl = $facebook->getLogoutUrl; } else { $loginUrl = $facebook->getLoginUrl(array('scope' => 'email,publish_stream,user_status', 'canvas' => 1, 'fbconnect' => 0, 'redirect_uri' => 'http://gno.....ment/index.php')); } ..... ..... <?php if ($user): ?> <h3>You</h3> <img src="https://graph.facebook.com/<?php echo $user; ?>/picture"> <h3>Your User Object (/me)</h3> <pre><?php print_r($user_profile); ?></pre> <?php else: ?> <strong><em>You are not Connected.</em></strong> <?php endif ?> <?php if ($user): ?> <a href="<?php echo $logoutUrl; ?>">Logout of FB</a> <?php else: ?> <div> Login using OAuth 2.0 handled by the PHP SDK: <a href="<?php echo $loginUrl; ?>">Login with Facebook</a> </div> <?php endif ?> It seems that if ($_GET['logout'] == "yes") might be the answer for me but i can't get it working. I don't know where logout is gotten from or where it is defined? This seems to be a common issue but i can't figure it out. I'd really appreciate some help.

  Read the article

• Cherry-picking from git to svn (or, How to keep a project history in git and releases in svn)

  - by Jawa

  I'm in a position where I'm the only one using git, everybody else is using svn. I've used 'git svn' to connect to the team svn and mostly it works just fine. Lately, I've started a project initially on my own, separate git repo and now I need to merge stuff from it to the svn. However, I still would like to keep tweaking the implementation in my own privacy between releases. So, what would be the most straightforward way to cherry-pick some commits from my private repo to the svn-cloned repo? Requirement is to keep full local history and have only one svn commit for each pick. Or is there some squashing to be done? As a method to achieve this, is there a way to get the private repo as another origin for the svn-cloned repo?

  Read the article

• SQLAlchemy - how to map against a read-only (or calculated) property

  - by Jeff Peck

  I'm trying to figure out how to map against a simple read-only property and have that property fire when I save to the database. A contrived example should make this more clear. First, a simple table: meta = MetaData() foo_table = Table('foo', meta, Column('id', String(3), primary_key=True), Column('description', String(64), nullable=False), Column('calculated_value', Integer, nullable=False), ) What I want to do is set up a class with a read-only property that will insert into the calculated_value column for me when I call session.commit()... import datetime def Foo(object): def __init__(self, id, description): self.id = id self.description = description @property def calculated_value(self): self._calculated_value = datetime.datetime.now().second + 10 return self._calculated_value According to the sqlalchemy docs, I think I am supposed to map this like so: mapper(Foo, foo_table, properties = { 'calculated_value' : synonym('_calculated_value', map_column=True) }) The problem with this is that _calculated_value is None until you access the calculated_value property. It appears that SQLAlchemy is not calling the property on insertion into the database, so I'm getting a None value instead. What is the correct way to map this so that the result of the "calculated_value" property is inserted into the foo table's "calculated_value" column?

  Read the article

• How can I launch RemoteApp on Windows Server from server itself at startup

  - by Rusted

  I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• Prevent Django from redirecting to add trailing slash

  - by konrad

  UPDATED: Sorry, it looks like it's Apache that's rewriting it for some reason, not Django. I'll investigate further and post my findings. I need to add a /xmlrpc.php to my Byteflow installation to handle an application that is written for PHP blog engines and uses this hardcoded path. For some reason Byteflow appends a slash to this URL using a 301 Moved Permanently redirect, which breaks the application. It does not do so for the /robots.txt that is configured in a similar way. Relevant lines from the project urls.py: url(r'^xmlrpc.php$', 'django_xmlrpc.views.xmlrpc_handler'), url(r'^robots.txt$', include('robots.urls')), I read that the behavior was changed in the Django codebase in commit 6852 (in 2007) to prevent redirects being done for urls that have been explicitly configured not to contain any trailing slashes. I'm using Django 1.1. I assume that once I have fixed this problem, I should be able to use this application with Byteflow, because the application uses the MetaWeblog XML-RPC API. Any clue?

  Read the article

• Access Edit Mode Values of BindingSource Control

  - by Christopher Edwards

  I have a BindingSource control (http://msdn.microsoft.com/en-us/library/system.windows.forms.bindingsource.aspx) with a datasource of a (single) Linq object. If I change any of the properties of the underlying Linq-to-Sql object then all the other changes on the bound controls on the form are lost. Does anyone now why and how I work around it? I don't want to call EndEdit because this will commit the changes to the underlying object. I think this might be because my underlying object linq-to-sql object does not implement IEditableObject so the potental new values for the object fields are sort of stored in the forms controls. Can anyone either clarify what is going on and/or suggest a work around. Thanks!

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >