Search Results

Search found 4906 results on 197 pages for 'ssh tunnel'.

Page 143/197 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

  • How to use iptables to forward all data from an IP to a Virtual Machine

    - by jro
    OK, in an attempt to get some response, a TL;DR version. I know that the following command: iptables -A PREROUTING -t nat -i eth0 --dport 80 --source 1.1.1.1 -j REDIRECT --to-port 8080 ... will redirect all traffic from port 80 to port 8080. The problem is that I have to do this for every port that is to be redirected. To be future-proof, I want all ports for an IP to be redirected to a different (internal) IP, so that if one might decide to enable SSH, they can directly connect without worrying about iptables. What is needed to reliable forward all traffic from an external IP, to an internal IP, and vice versa? Extended version I've scoured the internet for this, but I never got a solid answer. What I have is one physical server (HOST), with several virtual machines (VM) that need traffic redirected to them. Just getting it to work with a single machine is enough for now. The VM's run under VirtualBox, and are set to use a host-only adapter (vboxnet0). Everything seems to work, but it is greatly lagging. Both the host (CentOS 5.6) and the guest (Ubuntu 10.04) machine are running Linux. What I did was the following: Configure the VM to have a static IP in the network of the vboxnet0 adapter. Add an IP alias to the host, registering to the dedicated (outside) IP. Setup iptables to allow traffic to come through (via sysctl). Configure iptables to DNAT and SNAT data from a given IP address to the internal address. iptables commands: sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE iptables -t nat -I PREROUTING -d $OUT_IP -I eth0 -j DNAT --to-destination $IN_IP iptables -t nat -I POSTROUTING -s $IN_IP -o eth0 -j SNAT --to-source $OUT_IP Now the site works, but is really, really slow. I'm hoping I missed something simple, but I'm out of ideas for now. Some background info: before this, the site was working with basic port forwarding. E.g. port 80 was mapped to port 8080 using iptables. In VirtualBox (having the network adapter configured as NAT), a port forwarding the other way around made things work beautifully. The problem was twofold: first, multiple ports needed to be forwarded (for admin interfaces, https, ssh, etc). Second, it only allowed one IP address to use port 80. To resolve things, multiple external IP addresses are used for different (sub)domains. Likewise, the "VirtualBox" network will contain the virtual machines: DNS Ext. IP Adapter VM "VirtalBox" IP ------------------------------------------------------------------ a.example.com 1.1.1.1 eth0:1 vm_guest_1 192.168.56.1 b.example.com 2.2.2.2 eth0:2 vm_guest_2 192.168.56.2 c.example.com 3.3.3.3 eth0:3 vm_guest_3 192.168.56.3 And so on. Put simply, the goal is to channel all traffic from a.example.com to vm_guest_1 (of put differently, from 1.1.1.1 to 192.168.56.1). And achieve this with an acceptable speed :).

    Read the article

  • TCP/UDP hole punching from and to the same NAT network

    - by Luc
    I was wondering if tcp/udp hole punching would still work when you are in the same network (behind a NAT), and what the packet's path would be. What happens when using hole punching on the same network, is that it will send a packet out with the same destination and source address. Only the source and destination port would differ. I imagine a router with NAT loopback enabled will handle this as it should, but how about other routers? Would they drop the packet, or would a router (the first?) from the ISP bounce the packet back after which it gets handled okay? I'm wondering because I was thinking about using this technique to circumvent a block between peers in a network (like a school network where clients can only access the internet, but any contact with each other is blocked). The only other option is to use a man in the middle as proxy (tunnel?). The disadvantage of this is that you have to have a server with significantly more bandwidth than one that would only do hole punching. Also the latency would increase significantly.

    Read the article

  • Help with routing table

    - by user68752
    I have tried to find the answer to my question but not really found a clean and easy solution. I have a box (Ubuntu headless 10.04.1 server, with one Ethernet port) on LAN behind a router (running m0n0wall), that I have successfully installed a PPTP device (ppp0) on, this is working flawlessly (following this link) The thing is I want this box to route all it's internet traffic through the VPN tunnel (ppp0 device) but also being able to access the local LAN on 192.168.1.* subnet. I've succeeded a bit with this, but my problem right now is that I have port forwards (e.g. SSH) done in the m0n0wall pointing to this specific box which forces me to do "add routes" to all boxes that want to access this machine through this specific port. For instance a machine with ip xyz.xyz.xyz.xyz needs to have a static route setup in the routing table on the box to be able to access the box. This is the result of route -n xxx.xxx.137.2 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 xxx.xxx.137.2 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 yyy.yyy.0.0 192.168.1.1 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 Where xxx is the IPs provided from VPN server. yyy.yyy.0.0 is a net that i want to have access to the box, without this I can't access the box from outside the LAN (via port-forwards done in router software, m0n0wall) is there away round this ugly solution?

    Read the article

  • XAMPP server giving 404 error when requested by ipv4 connection

    - by boyb
    This is in reference to a previous question that I asked and was answered by womble. http://serverfault.com/a/406280/127729 So, now we have the real DNS records, we can do some diagnosis. dig for both A and AAAA on akosiboybastos.broker.freenet6.net gives a valid response, with an appropriate address. Good. dig for both A and AAAA on bastosforum.strangled.net gives the same responses (with a CNAME response thrown in). Also good. This means that the problem is not DNS-related, as those records are in order. wget -6 bastosforum.strangled.net/ gives a 200 OK response. wget -4 bastosforum.strangled.net/ gives a 404 Not Found response. This means that your webserver is misconfigured so that it's not serving the response you desire on IPv4. Given that the initial DNS problem asked in this question has been solved, I would recommend posting a new question with relevant webserver-related configuration, if you can't determine the configuration error yourself. I am using XAMPP(latest version) running phpbb3.0.10 via ipv6 tunnel from freenet6 and my domain is akosiboybastos.broker.freenet6.com, nothing fancy with the installation just out of the box install(with a few cosmetic mod). Both ipv4 and ipv6 traffic can connect using that url, but when I try to put a CNAME record on my test domain which is bastosforum.strangled.net pointing it to akosiboybastos.broker.freenet6.com only ipv6 can connect. As suggested by womble, this is a misconfigured webserver. To be honest I don't know where to start checking on the server as it is fully working if you use the domain given by freenet6 (akosiboybastos.broker.freenet6.com), any info on how to go about this server issue is welcome as i'm really a noob when it comes to computers. regards boyb

    Read the article

  • openvpn in a bridge?

    - by sebelk
    I have a somewhat tricky proble to solve. We have a wireless link between 2 building. One of them has an mikrotik and below there are some vlans. Some machines of one vlan need to use openvpn to connect to a remote private lan. I put a TP-Link WR1043ND (which those machines connect to) with openwrt with ebtables just in case I need it. I've configured openwrt in such a way that all ports belongs to the same vlan. My idea was to make things as transparent as I can. It has a bridge as follows: usr/sbin/brctl-full show br-lan bridge name bridge id STP enabled interfaces br-lan 8000.f8d111565716 no eth0.1 eth0.2 Also I've added an ebtables rule: ebtables -t broute -A BROUTING -p ipv4 -j DROP So "bridge" has only one IP address. I've installed openvpn and I'm trying to bring up the tunnel but I can't still get working. Sure, someone can says why don't you use the vpn on the mikrotik, there are some reasons, the first one is I have little experience with mikrotik and I'd want to have the vpn at hand :) The problem is that openvpn is not working, because it is complaining that I have only one Ip Address on the server side. So I set up and alias interface with another IP address but is not working either: : Rejected connection attempt from IP-Client-Side:37801 due to --remote setting Is there a way to make it work?

    Read the article

  • Cannot browse ipv4 websites (OpenVPN )

    - by user1494428
    I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

    Read the article

  • Have some questions about setting up a VPN to my private cloud servers

    - by Pure.Krome
    I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

    Read the article

  • Using iptables to make a VPN router

    - by lost_in_the_sauce
    I am attempting to make a VPN connection to a third party VPN site, then forward traffic from my internal computers (ssh and ping for now) out to the VPN site using IPTables. 3rd Party <- (tun0/eth0)Linux VPN Box(eth1) <- Windows7TestBox I am running on CentOS 6.3 Linux and have two network connections eth0-public eth1-private. I am running vpnc-0.5.3-4 which is currently connecting to my destination. When I connect I am able to ping the destination IPAddresses but that is as far as I can get. ping -I tun0 10.1.33.26 success ping -I eth0 10.1.33.26 fail ping -I eth1 10.1.33.26 fail I have my private network Windows 7 test box set up to have the eth1 (private) network of my VPN Server as its gateway and can ping him fine. I need IPTables to send the Windows 7 traffic out the VPN tunnel. I have tried for a few days many different IPTables configurations from this site and others, either the other examples are too simple or overly complicated. The only thing this server is doing is connecting to the VPN and forwarding all traffic. So we can "flush" everything and start from scratch here. It is a blank slate. #!/bin/bash echo "Define variables" ipt="/sbin/iptables" echo "Zero out all counters" $ipt -Z $ipt -t nat -Z $ipt -t mangle -Z echo "Flush all active rules, delete all chains" $ipt -F $ipt -X $ipt -t nat -F $ipt -t nat -X $ipt -t mangle -F $ipt -t mangle -X $ipt -P INPUT ACCEPT $ipt -P FORWARD ACCEPT $ipt -P OUTPUT ACCEPT $ipt -t nat -A POSTROUTING -o tun0 -j MASQUERADE $ipt -A FORWARD -i eth1 -o eth0 -j ACCEPT $ipt -A FORWARD -i eth0 -o eth1 -j ACCEPT $ipt -A FORWARD -i eth0 -o tun0 -j ACCEPT $ipt -A FORWARD -i tun0 -o eth0 -j ACCEPT Again I have done many variations of the above and many other rules from other posts but haven't been able to move forward. It seems like such a simple task, and yet....

    Read the article

  • Setting up a server that routes local traffic through vpn, while still being able to access internet directly

    - by Kazuo
    The goal is to setup a local server that routes local traffic through an uncontrolled remote vpn service while still being able to access the internet directly (not tunneled via vpn) and provide services through that direct connection. It is supposed to look like this: http://i.stack.imgur.com/74dGC.png Note: There is another router with modem between the local server and the internet. What is the easiest (best?) way to get this network setup working? I'm planning to setup the connection between the local router and the local server with simple ip forwarding. The problem now is that all the server's traffic is routed through the vpn tunnel as soon as I connect the server's openvpn client to the remote service so there is no direct internet connection available. My first idea was to setup a virtual machine (lxc container or something) and run the vpn client and local networking stuff in the vm. So that the vm receives all the incoming traffic from the local router and tunnels it through the vpn. This, as far as I understand, should not affect the physical server's network connection and should allow it to provide services to the internet. Before I start trying to set this up (I don't have much experience in networking), is there any easier or better way to do this? I would be thankful for every suggestion. Edit: Let's say the interface connected to the internet is eth0 and the interface connected to the local router is eth1. Another idea would be to create a virtual interface eth0:0 and specifiy it as openvpn's local endpoint and then force any traffic coming from eth1 through eth0:0. I'm not sure how I would force the traffic through eth0:0, though (possibly by adding routes).

    Read the article

  • VMWare server: virtual machine start-up reaches 95% and hangs

    - by Magsol
    This problem cropped up today, after updating my eVGA motherboard's chipset in order to try and fix an unrelated issue. After installing the chipset update (contained SATA and Ethernet drivers), every time I've tried to start my Ubuntu VM, it reaches 95% in the web interface and then just hangs. I'm using VMWare Server 2.0.2, running it within Windows 7 64-bit. I haven't had any issues up until now, and I suspect it has something to do with the chipset update. I've already tried reinstalling VMWare itself, removing the VM from the inventory and re-adding it, and neither has proved successful. I'm also not sure how to kill the VMware server process itself once the start-up hangs; I've only been able to try again by rebooting (as none of the VMWare Services listed kill the server process itself). Any insights? Edit: Uhhh...as an addendum: I have a cron job set up on my Ubuntu VM that runs every 20 minutes. The VM is still listed in the VMWare web interface as at 95% of startup, and the start/stop buttons are still disabled, but the cronjob just ran. I also tested SSH, and I was able to tunnel into the Ubuntu VM as well. Now I'm really confused. Edit #2: I just started a thread on the VMWare Server support forums on this same topic. Hopefully between the two communities, we can come up with an answer: http://communities.vmware.com/thread/251033 Edit #3: In lieu of a specific fix, I've switched over to VirtualBox, and all is working just fine.

    Read the article

  • Kernel oops on Linux running in VirtualBox breaks some IO-related functionality on the server

    - by Kristoffer E
    We are having problems with CentOS release 6.3 running in VirtualBox on Windows 7 machines. The symptoms are the following: Everything works as normal for several hours, even days. Then something happens which breaks the system. What we still can do after this something happens: Access the web server Use existing SSH sessions to run top and free What does not work: Starting new SSH sessions (hangs after username and password is entered) Running ls in existing SSH sessions (hangs) SSI includes from our web servers that fetch data from remote machines probably more What we see on the server when this something happens is the following: Load average go from basically nothing to around 3 CPU usage is still low (5%) Disk activity is low (running iostat) Plenty of memory available Plenty of disk space available In /var/log/messages we get the following: Jun 14 01:10:48 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:48 devvm kernel: Tx Queue <0> Jun 14 01:10:48 devvm kernel: TDH <2e> Jun 14 01:10:48 devvm kernel: TDT <30> Jun 14 01:10:48 devvm kernel: next_to_use <30> Jun 14 01:10:48 devvm kernel: next_to_clean <2e> Jun 14 01:10:48 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:48 devvm kernel: time_stamp <1038284db> Jun 14 01:10:48 devvm kernel: next_to_watch <2f> Jun 14 01:10:48 devvm kernel: jiffies <103828b42> Jun 14 01:10:48 devvm kernel: next_to_watch.status <0> Jun 14 01:10:50 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:50 devvm kernel: Tx Queue <0> Jun 14 01:10:50 devvm kernel: TDH <2e> Jun 14 01:10:50 devvm kernel: TDT <30> Jun 14 01:10:50 devvm kernel: next_to_use <30> Jun 14 01:10:50 devvm kernel: next_to_clean <2e> Jun 14 01:10:50 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:50 devvm kernel: time_stamp <1038284db> Jun 14 01:10:50 devvm kernel: next_to_watch <2f> Jun 14 01:10:50 devvm kernel: jiffies <103829312> Jun 14 01:10:50 devvm kernel: next_to_watch.status <0> Jun 14 01:10:52 devvm kernel: ------------[ cut here ]------------ Jun 14 01:10:52 devvm kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Jun 14 01:10:52 devvm kernel: Hardware name: VirtualBox Jun 14 01:10:52 devvm kernel: NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Jun 14 01:10:52 devvm kernel: Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Jun 14 01:10:52 devvm kernel: Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Jun 14 01:10:52 devvm kernel: Call Trace: Jun 14 01:10:52 devvm kernel: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 Jun 14 01:10:52 devvm kernel: [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 Jun 14 01:10:52 devvm kernel: [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 Jun 14 01:10:52 devvm kernel: [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 Jun 14 01:10:52 devvm kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 Jun 14 01:10:52 devvm kernel: [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b Jun 14 01:10:52 devvm kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 Jun 14 01:10:52 devvm kernel: <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 Jun 14 01:10:52 devvm kernel: [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 Jun 14 01:10:52 devvm kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff814e433a>] ? rest_init+0x7a/0x80 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 Jun 14 01:10:52 devvm kernel: [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 Jun 14 01:10:52 devvm kernel: ---[ end trace 2c7bb984812cf120 ]--- Jun 14 01:10:52 devvm kernel: e1000 0000:00:03.0: eth0: Reset adapter Jun 14 01:10:53 devvm abrtd: Directory 'oops-2013-06-14-01:10:53-1537-0' creation detected Jun 14 01:10:53 devvm abrt-dump-oops: Reported 1 kernel oopses to Abrt Jun 14 01:10:53 devvm abrtd: Can't open file '/var/spool/abrt/oops-2013-06-14-01:10:53-1537-0/uid': No such file or directory Jun 14 01:10:55 devvm kernel: Bridge firewalling registered After this we see for a while, every two minutes: Jun 14 01:14:22 devvm kernel: INFO: task events/0:19 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: events/0 D 0000000000000000 0 19 2 0x00000000 Jun 14 01:14:22 devvm kernel: ffff880116c4fb90 0000000000000046 00000000ffffffff 0000000000000008 Jun 14 01:14:22 devvm kernel: 0000000000016680 0000000000016680 ffff880028210400 0000000000016680 Jun 14 01:14:22 devvm kernel: ffff880116c4daf8 ffff880116c4ffd8 000000000000fb88 ffff880116c4daf8 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff8105b483>] ? perf_event_task_sched_out+0x33/0x80 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100975d>] ? __switch_to+0x13d/0x320 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d093>] __cancel_work_timer+0x1b3/0x1e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d0f0>] cancel_work_sync+0x10/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffffa01c5ca5>] e1000_down_and_stop+0x25/0x50 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cb695>] e1000_down+0x155/0x200 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbcb0>] ? e1000_reset_task+0x0/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbd1e>] e1000_reset_task+0x6e/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffff8108c760>] worker_thread+0x170/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff810920d0>] ? autoremove_wake_function+0x0/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8108c5f0>] ? worker_thread+0x0/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff81091d66>] kthread+0x96/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c14a>] child_rip+0xa/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff81091cd0>] ? kthread+0x0/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 Jun 14 01:14:22 devvm kernel: INFO: task parted:8069 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: parted D 0000000000000003 0 8069 7994 0x00000080 Jun 14 01:14:22 devvm kernel: ffff8800908b3bb8 0000000000000082 0000000000000000 ffff88010ab50080 Jun 14 01:14:22 devvm kernel: ffff880116c7d500 0000000000000001 0000000000000000 0000000000000000 Jun 14 01:14:22 devvm kernel: ffff88010ab50638 ffff8800908b3fd8 000000000000fb88 ffff88010ab50638 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8112b6d0>] ? lru_add_drain_per_cpu+0x0/0x10 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d177>] flush_work+0x77/0xc0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d2f3>] schedule_on_each_cpu+0x133/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff811ad440>] ? invalidate_bh_lru+0x0/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8112ae35>] lru_add_drain_all+0x15/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff811adf6a>] invalidate_bdev+0x2a/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8125e9a4>] blkdev_ioctl+0x3b4/0x6e0 Jun 14 01:14:22 devvm kernel: [<ffffffff811b381c>] block_ioctl+0x3c/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8118dec2>] vfs_ioctl+0x22/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e064>] do_vfs_ioctl+0x84/0x580 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e5e1>] sys_ioctl+0x81/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b In /var/spool/abrt/oops-2013-06-14-01:10:53-1537-0 we can see the following information: In backtrace: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Hardware name: VirtualBox NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Call Trace: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 [<ffffffff814e433a>] ? rest_init+0x7a/0x80 [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 In cmdline: ro root=/dev/mapper/vg_01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_01/lv_root crashkernel=129M@0M rhgb quiet rd_LVM_LV=vg_01/lv_swap rd_NO_DM rhgb quie Additional information: # uname -a Linux devvm 2.6.32-279.el6.x86_64 #1 SMP Fri Jun 22 12:19:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/redhat-release CentOS release 6.3 (Final) VirtualBox version 4.2.6. Any insight in how we can proceed with troubleshooting this is appreciated. If you need more information, just let me know.

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

    Read the article

  • OpenVPN - Windows 8 to Windows 2008 Server, not connecting

    - by niico
    I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

    Read the article

  • Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

    - by Sesame
    I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

    Read the article

  • 'rsync' is not recognized as an internal or external command, operable program or batch file

    - by user1688269
    I am VERY new to rsync and cygwin and I'm pretty sure I've installed everything correctly. I am trying to (for now) just rsync two Windows XP Laptops to tranfer files across from the one to the other to get a feel of it before I tackle bigger projects. This is the code I try use to transfer the files but I always get the same error. $ rsync -zrptL -v -e 'ssh -p 222' /tmp/rawr/ [email protected]:/tmp/play [email protected]'s password: 'rsync' is not recognized as an internal or external command, operable program or batch file. rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at /home/lapo/package/rsync-3.0.9-1/src/rsync-3.0.9/io.c(605) [sender=3.0.9] What could be the problem? I am really stuck at the moment.

    Read the article

  • "getpt failed: No such file or directory" when opening a terminal through VNC

    - by Michael
    I am running Debian Wheezy on my server, and have just installed a VNC server and Xfce. I have come across a problem: whenever I open a terminal emulator through VNC, I get an error box with this message: Failed to execute child. getpt failed: No such file or directory. This happens with every terminal I try to run. I can still run commands through SSH, however. It's just the terminal that won't open. Does anyone have any suggestions? /etc/fstab: proc /proc proc defaults 0 0 none /dev/pts devpts rw 0 0

    Read the article

  • rsync on QNAP NAS fails recently

    - by user192702
    I have been using rsync to copy a large backup file from a remote host to my QNAP NAS. It's been working fine until recently. It seems like almost every time when it executes it's giving a time out after 15s. Following is what I have captured in the log. Any ideas? 2013-11-10 23:10:01 HKT - Executing: rsync -t -v -e ssh [email protected]:/home/backup/backup/backup_file-11102013* /share/homes/backup/backup/web/database [receiver] io timeout after 10 seconds -- exiting rsync error: timeout in data send/receive (code 30) at io.c(140) [receiver=3.0.7] rsync: connection unexpectedly closed (73 bytes received so far) [generator] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [generator=3.0.7] 2013-11-10 23:10:15 HKT - Done rsync

    Read the article

  • iptables is not allowing me to contact my dns nameservers

    - by user1272737
    I have the follwing iptables rules: Chain INPUT (policy DROP) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- localhost.localdomain anywhere tcp dpt:mysql ACCEPT tcp -- anywhere anywhere tcp dpt:14443 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:xxxxxxx Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination When I turn off iptables I am able to use wget and all other commands. When these rules are enabled I cannot connect to any address. Any idea why this would be?

    Read the article

  • Ruby Debug IDE error : ruby-debug-ide-0.4.9/lib/ruby-debug-ide.rb:109:in `debug_load'

    - by Paul
    I hope someone can assist me. I have RubyMine 2.0.2 installed on Windows 7 32 bit computer. Since a week ago (I presume it must have been after I have update some gems) I cant seem to debug form the IDE. I am trying to debug a rake task which I could before. Running the rake task normally works perfect, just debug doesnt. Its not just limited to the rake, I cant debug any ruby files. I've tried installing older versions of debug-ide and debug-base but to no success. I've tried it with ruby 1.8.7 and 1.8.6 on different computers but nothing. Trying to search the web gave some information, which I've tried, but also no success. Im desperate to get this working. Below are the full error and my current settings: Error: C:\InstantRails\ruby\bin\ruby.exe -e STDOUT.sync=true;STDERR.sync=true;load($0=ARGV.shift) C:\InstantRails\ruby\bin/rdebug-ide --port 57167 -- C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake Fast Debugger (ruby-debug-ide 0.4.9) listens on :57167 C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake:5 C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_load' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_program' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/bin/rdebug-ide:87 C:\InstantRails\ruby\bin/rdebug-ide:19:in `load' C:\InstantRails\ruby\bin/rdebug-ide:19 -e:1:in `load' -e:1 Uncaught exception: undefined method `namespace' for main:Object Process finished with exit code 1 Code snippet (It fails at the start of namespace. If I remove this, it fails on the next line, etc, etc) #This script should run every 15 minutes require 'snmp' require 'yaml' namespace :cdeweb do RubyGems Environment: RUBYGEMS VERSION: 1.3.7 RUBY VERSION: 1.8.6 (2007-09-24 patchlevel 111) [i386-mswin32] INSTALLATION DIRECTORY: C:/InstantRails/ruby/lib/ruby/gems/1.8 RUBY EXECUTABLE: C:/InstantRails/ruby/bin/ruby.exe EXECUTABLE DIRECTORY: C:/InstantRails/ruby/bin RUBYGEMS PLATFORMS: ruby x86-mswin32-60 GEM PATHS: C:/InstantRails/ruby/lib/ruby/gems/1.8 C:/Users/Paul.LPFSYSTEMS/.gem/ruby/1.8 GEM CONFIGURATION: :update_sources = true :verbose = true :benchmark = false :backtrace = false :bulk_threshold = 1000 REMOTE SOURCES: http://rubygems.org/ * LOCAL GEMS * actionmailer (2.3.5, 2.0.2) actionpack (2.3.5, 2.0.2) activerecord (2.3.5, 2.0.2) activeresource (2.3.5, 2.0.2) activesupport (2.3.5, 2.0.2) capistrano (2.5.18, 2.1.0) cgi_multipart_eof_fix (2.5.0) cmdparse (2.0.2) columnize (0.3.1) fxri (0.3.7, 0.3.6) fxruby (1.6.12 mswin32) gem_plugin (0.2.3) highline(1.5.2, 1.4.0) hpricot (0.8.2 x86-mswin32, 0.6 mswin32) inaction_mailer (0.6) json (1.4.2 x86-mswin32) json_pure (1.4.2) linecache (0.43 mswin32) log4r (1.1.7, 1.0.5) mongrel (1.1.5 x86-mswin32-60, 1.1.2 mswin32) mysql(2.8.1 x86-mswin32, 2.7.3 mswin32) needle (1.3.0) net-scp (1.0.2) net-sftp (2.0.4, 1.1.0) net-ssh (2.0.22, 1.1.2) net-ssh-gateway (1.0.1) rack (1.0.1) rails (2.3.5, 2.0.2) rake (0.8.7, 0.8.1, 0.8.0, 0.7.3) ruby-debug-base (0.10.3 mswin32) ruby-debug-ide (0.4.9) ruby-net-ldap (0.0.4) rubygems-update (1.3.7, 1.3.6, 1.0.1) snmp (1.0.2) sources (0.0.1) sqlite3-ruby (1.2.5 x86-mswin32, 1.2.1 mswin32) win32-api (1.4.6 x86-mswin32-60, 1.0.4 mswin32) win32-clipboard (0.5.2, 0.4.3) win32-dir (0.3.6, 0.3.2) win32-eventlog (0.5.2, 0.4.6) win32-file (0.6.3, 0.5.4) win32-file-stat (1.3.4, 1.2.7) win32-process (0.6.2, 0.5.3) win32-sapi (0.1.5, 0.1.4) win32-sound (0.4.2, 0.4.1) windows-api (0.4.0, 0.2.0)

    Read the article

  • Cannot start serial over lan on iDrac6

    - by Bryan Agee
    I have a couple of Dell R610/R710 servers loaded with iDrac6 system management boards. I figured out how to log into the SM CLP with ssh. According to the dell documentation, I should be able to start a console session by running: start /system1/sol1 but I get the following failure message: cmdstat status : 3 status_tag : COMMAND EXECUTION FAILED job job_id : 12 joberr errtype : 1 errtype_desc : Other cimstat : 6 cimstat_desc : CIM_ERR_NOT_FOUND severity : 2 severity_desc : Low /system1/sol1 started FAILED at Sun Sep 16 00:20:58 2012 I have enabled the serial-over-lan via the web interface and rebooted, but nothing seems to make them available.

    Read the article

  • Using Cloud Formation provisioned security group with specific subnet

    - by Fred Clausen
    Summary I'm attempting to create an AWS CloudFormation template which contains an instance for which I want to select a particular subnet. If I specify the subnet ID then I get the following error The parameter groupName cannot be used with the parameter subnet. From reading this thread it appears I need to provide security group IDs - not names. How can I create a security group in CloudFormation and then get its ID after the fact? Details The relevant part of the instance config is as follows "WebServerHost": { "Type" : "AWS::EC2::Instance", <..skipping metadata...> "Properties": { "ImageId" : { "ami-1234" }, "InstanceType" : { "Ref" : "WebServerInstanceType" }, "SecurityGroups" : [ {"Ref" : "WebServerSecurityGroup"} ], "SubnetId" : "subnet-abcdef123", and the security group looks as follows "WebServerSecurityGroup" : { "Type" : "AWS::EC2::SecurityGroup", "Properties" : { "GroupDescription" : "Enable HTTP and SSH", "SecurityGroupIngress" : [ {"IpProtocol" : "tcp", "FromPort" : "80", "ToPort" : "80", "CidrIp" : "0.0.0.0/0"}, {"IpProtocol" : "tcp", "FromPort" : "22", "ToPort" : "22", "CidrIp" : "0.0.0.0/0"} ] } }, How can I create and then get that security group's ID?

    Read the article

  • SOLVED:Bootloader isn't executable booting XEN PV Guest with virtual-manager

    - by user2284355
    I am going insane with an error I am encountering while trying to install a PV Guest of Debian Wheezy on a Ubuntu Server precise Xen default build with libvirt. The steps I take with virt-manager are the following: 1.Net install via: http://ftp.es.debian.org/debian/dists/stable/main/installer-amd64/ 2.Install process is flawless, installed via VNC over virt-manager 3.When the VM starts I get the following error: Error starting domain: POST operation failed: xend_post: error from xen daemon: (xend.err "Bootloader isn't executable") Most answers i have found on google say that I need to edit the VM's .cfg file and correct the path to pygrub but virt-manager does not seem to create this file (I have searched the entire drive with "find". Another detail is that virsh list --all shows no VMs (Not even dom0) while the command xm list shows all of them. Any help is much appreciated. EDIT: Connected remotely via virsh: virsh -c xen+ssh://user@ip dumpxml vmname Found line: /usr/bin/pygrub ln -s /usr/lib/xen-4.1/bin/pygrub /usr/bin/pygrub Now it works. If anyone can think of a better solution give me a shout. Cheers

    Read the article

  • Create Text File Without BOM

    - by balexandre
    Hi guys, I tried this aproach without any success the code I'm using: // File name String filename = String.Format("{0:ddMMyyHHmm}", dtFileCreated); String filePath = Path.Combine(Server.MapPath("App_Data"), filename + ".txt"); // Process ProcessPBS pbs = new ProcessPBS(); pbs.CreatePBSInfoFile(pbslist, Convert.ToInt64(filename)); // Save file Encoding utf8WithoutBom = new UTF8Encoding(true); TextWriter tw = new StreamWriter(filePath, false, utf8WithoutBom); foreach (string s in pbs.GeneratedFile.ToArray()) tw.WriteLine(s); tw.Close(); // Push Generated File into Client Response.Clear(); Response.ContentType = "application/vnd.text"; Response.AppendHeader("Content-Disposition", "attachment; filename=" + filename + ".txt"); Response.TransmitFile(filePath); Response.End(); the result: It's writing the BOM no matter what, and special chars (like Æ Ø Å) are not correct :-/ I'm stuck! I can't create a file using UTF-8 as Encoding and 8859-1 as CharSet :-( Anyone can help me find the light in the tunnel? All help is greatly appreciated, thank you!

    Read the article

  • Un-failing over a Cisco PIX 515e

    - by ABrown
    We had a power outage at our data center last week and when our dual PIX 515E running IOS 7.0(8) (configured with a failover cable) came back, they were in a failed over state where the Secondary unit is active and the Primary unit is standby I have tried 'failover reset', 'failover active', and 'failover reload-standby' as well as executing reloads on both units in a variety of orders, and they don't come back Primary/Active Secondary/Standby. The only thing in my arsenal that I haven't tried is driving to the data center and performing a hard reboot, which I hate to do. I have read How Failover Works on the Cisco Secure Firewall and it seems like this should be wicked straight forward. output of show failover on Primary: Failover On Cable status: Normal Failover unit Primary Failover LAN Interface: N/A - Serial-based failover enabled Unit Poll frequency 15 seconds, holdtime 45 seconds Interface Poll frequency 15 seconds Interface Policy 1 Monitored Interfaces 2 of 250 maximum Version: Ours 7.0(8), Mate 7.0(8) Last Failover at: 02:52:05 UTC Mar 10 2010 This host: Primary - Standby Ready Active time: 0 (sec) Interface outside (x.x.x.165): Normal Interface inside (y.y.y.3): Normal Other host: Secondary - Active Active time: 897045 (sec) Interface outside (x.x.x.164): Normal Interface inside (y.y.y.4): Normal Stateful Failover Logical Update Statistics Link : Unconfigured. output of show failover on Secondary: Failover On Cable status: Normal Failover unit Secondary Failover LAN Interface: N/A - Serial-based failover enabled Unit Poll frequency 15 seconds, holdtime 45 seconds Interface Poll frequency 15 seconds Interface Policy 1 Monitored Interfaces 2 of 250 maximum Version: Ours 7.0(8), Mate 7.0(8) Last Failover at: 02:03:04 UTC Feb 28 2010 This host: Secondary - Active Active time: 896925 (sec) Interface outside (x.x.x.164): Normal Interface inside (y.y.y.4): Normal Other host: Primary - Standby Ready Active time: 0 (sec) Interface outside (x.x.x.165): Normal Interface inside (y.y.y.3): Normal Stateful Failover Logical Update Statistics Link : Unconfigured. I'm seeing the following in my syslog: Mar 10 03:05:00 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:05:09 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reload-standby' command. Mar 10 03:05:12 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=20,my=Active,peer=Failed. Mar 10 03:05:12 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Failed. Mar 10 03:06:09 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=0,my=Active,peer=Failed. Mar 10 03:06:09 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is down. Mar 10 03:06:09 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=1,my=Active,peer=Failed. Mar 10 03:06:10 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is up. Mar 10 03:06:10 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=411,op=2,my=Active,peer=Failed. Mar 10 03:06:23 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=80,my=Active,peer=Standby Ready. Mar 10 03:06:23 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Standby Ready. Mar 10 03:06:24 fw2 %PIX-6-720027: (VPN-Primary) HA status callback: My state Standby Ready. Mar 10 03:07:05 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:07:31 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover active' command. Mar 10 03:08:04 fw1 %PIX-5-611103: User logged out: Uname: enable_1 Mar 10 03:08:04 fw1 %PIX-6-315011: SSH session from admin1_int on interface inside for user "pix" terminated normally Mar 10 03:08:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=20,my=Active,peer=Failed. Mar 10 03:08:39 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Failed. Mar 10 03:09:10 fw1 %PIX-6-605005: Login permitted from admin1_int/36891 to inside:192.168.4.4/ssh for user "pix" Mar 10 03:09:23 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:09:38 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=0,my=Active,peer=Failed. Mar 10 03:09:39 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is down. Mar 10 03:09:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=1,my=Active,peer=Failed. Mar 10 03:09:39 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is up. Mar 10 03:09:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=411,op=2,my=Active,peer=Failed. Mar 10 03:09:52 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=80,my=Active,peer=Standby Ready. Mar 10 03:09:52 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Standby Ready. Mar 10 03:09:53 fw2 %PIX-6-720027: (VPN-Primary) HA status callback: My state Standby Ready. I'm not exactly sure how to interpret that syslog data. Primary doesn't seem to even try to become Active. When I reload the individual units separately, my connections are retained, so it doesn't seem like I have a real hardware failure. Is there something I can query (IOS or SNMP) to check for hardware issues? Any thoughts? My IOS-fu is weak. Thanks for any help you might provide, Aaron

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >