Search Results

Search found 38117 results on 1525 pages for 'sql tools'.

Page 1430/1525 | < Previous Page | 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437  | Next Page >

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• How to find the cause of locked user account in Windows AD domain

  - by Stephane

  After a recent incident with Outlook, I was wondering how I would most efficiently resolve the following problem: Assume a fairly typical small to medium sized AD infrastructure: several DCs, a number of internal servers and windows clients, several services using AD and LDAP for user authentication from within the DMZ (SMTP relay, VPN, Citrix, etc.) and several internal services all relying on AD for authentication (Exchange, SQL server, file and print servers, terminal services servers). You have full access to all systems but they are a bit too numerous (counting the clients) to check individually. Now assume that, for some unknown reason, one (or more) user account gets locked out due to password lockout policy every few minutes. What would be the best way to find the service/machine responsible for this ? Assuming the infrastructure is pure, standard Windows with no additional management tool and few changes from default is there any way the process of finding the cause of such lockout could be accelerated or improved ? What could be done to improve the resilient of the system against such an account lockout DOS ? Disabling account lockout is an obvious answer but then you run into the issue of users having way to easily exploitable passwords, even with complexity enforced.

  Read the article

• How to debug slow queries in Django+Postgres

  - by lacker

  My database queries from Django are starting to take 1-2 seconds and I'm having trouble figuring out why. Not too big a site, about 1-2 requests per second (that hit Django; static files are just served from nginx.) The thing that confuses me is, I can replicate the slowness in the Django shell using debug mode. But when I issue the exact same queries at an sql prompt they are fast. It takes about a second for a query to return, but when I check connection.queries it reports the time as under 10 ms. Here's an example (from the Django shell): >>> p = PlayerData.objects.get(uid="100000521952372") >>> a = time.time(); p.save(); print time.time() - a 1.96812295914 >>> for d in connection.queries: print d["time"] ... 0.002 0.000 0.000 How can I figure out where this extra time is being spent? I'm using Apache+mod_wsgi in daemon mode, but this happens with just the django shell as well, so I figure it is not apache-related.

  Read the article

• .htaccess rewrite rule to ignore a directory

  - by Kirk Strobeck

  I am running a Symphony installation out of the directory symphony but I want to remove that word from the URL in specific cases. When a user visits http://domain.com/demo It should go to http://domain.com/symphony/demo because I've added a specific rule for demo. If I haven't added a specific rule for demo in the .htaccess, then it should resolve to http://domain.com/demo as typed. This will route it to another part of our app. Here is my current rewrite rule ### Symphony 2.3.x ### Options +FollowSymlinks -Indexes <IfModule mod_rewrite.c> RewriteEngine on RewriteBase / ### SECURITY - Protect crucial files RewriteRule ^manifest/(.*)$ - [F] RewriteRule ^workspace/(pages|utilities)/(.*)\.xsl$ - [F] RewriteRule ^(.*)\.sql$ - [F] RewriteRule (^|/)\. - [F] ### DO NOT APPLY RULES WHEN REQUESTING "favicon.ico" RewriteCond %{REQUEST_FILENAME} favicon.ico [NC] RewriteRule .* - [S=14] ### IMAGE RULES RewriteRule ^image\/(.+\.(jpg|gif|jpeg|png|bmp))$ extensions/jit_image_manipulation/lib/image.php?param=$1 [B,L,NC] ### CHECK FOR TRAILING SLASH - Will ignore files RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !/$ RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ $1/ [L,R=301] ### URL Correction RewriteRule ^(symphony/)?index.php(/.*/?) $1$2 [NC] ### ADMIN REWRITE RewriteRule ^symphony\/?$ index.php?mode=administration&%{QUERY_STRING} [NC,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^symphony(\/(.*\/?))?$ index.php?symphony-page=$1&mode=administration&%{QUERY_STRING} [NC,L] ### FRONTEND REWRITE - Will ignore files and folders RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*\/?)$ index.php?symphony-page=$1&%{QUERY_STRING} [L] </IfModule> ###### How would I change the rewrite rule to support those cases?

  Read the article

• Macbook Pro - 15" with i7 processor - Any problems with heat?

  - by webworm

  You may have already heard about the review done by the folks at PC Authority in Australia, where they had an i7 MacBook Pro that got up to 100 degrees Celsius during benchmarking. Here is the URL in case you have not read it. http://www.pcauthority.com.au/News/172791,macbook-pro-helps-core-i7-hit-100-degrees.aspx In any case, I was considering purchasing a 15" Macbook Pro with the i7 processor and the NVIDIA GeForce GT330M with 512 video memory. Having read how hot the computer got I started to become hesitant about purchasing. My main concern is long term damage to the computer due to excessive heat. I plan to use the MacBook Pro as a development machine where I will be running Windows 7 within VMWare Fusion or Virtual Box. Within the VM I will be running IIS, SQL Server, Visual Studio and SharePoint Server. Hence why I would like to have the power of the i7 processor. That is why I wanted to check with actually owners of the MacBooks with the i7 processor and see what their experiences have been. Have you noticed excessive heat? How does your Macbook handle process intensive apps over long periods of time? Thank you!

  Read the article

• Strange permission errors with Windows Server 2008

  - by Spirit

  I just don't know a better way to describe my issue that is driving me nuts. I am trying to establish a test domain with virtual machines on a box that has Win7 with VMwware workstation installed. The purpouse with this domain will be so that we can try and test different situations before they go into the production network. I build a VM with WinSrv2008R2 and I am using that VM as a template to make other servers for the domain by making clones of it. Now I raise a DC with one clone and a member server with another clone - I add the server to the domain. I am following a standard procedure as always (it is not my first domain). Then I make an admin account and I am adding the admin to be a member of the Domain and Enterprise Admins group. That admin is admin with full priviledges on the DC.. no problem there. But on the other server has ... somewhat half the privileges and I cant log in via RDP. I tryed with another account. Same issues. For example (with half the privileges): I can't open the Even Viewer if I go via Start - Administrative Tools - Event Viewer. But I can open the Even Viewer via the server manager. You can notice this on the image below. I mean WTF??? I am going crazy, I haven't experienced anything similar in my three years of expertise. I already lost 3 days troubleshooting this. Could this be related with the cloning? Perhaps if I make fresh installs of WinSrv2008 there won't be any problems? I've had raised test domains as VMs on other occasions before, and there weren't any problems then. This is VMware Workstation 8. I've made clones before, on Workstation 7 it didn't had any problems. Anyone has any ideas? UPDATE: This is the info from the event log when I try to access via RDP: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: pat.coleman Account Domain: lab Failure Information: Failure Reason: Domain sid inconsistent. Status: 0xc000006d Sub Status: 0xc000019b

  Read the article

• How can I verify that my SSD is performing as it should?

  - by Jon Skeet

  EDIT: Okay, so I've no idea what caused the change, but after trying loads of different things to work out what was wrong, I've rerun the WEI (about the 4th time in total) and the score has jumped to a far more respectable 7.3. I'm going to leave well alone now :) I've got a brand new 256GB SSD (Crucial CT256M225) which should have stellar performance. However, on my (also brand new) Dell Studio 1557 with Windows 7 Professional 64 bit, it's only giving a performance index of 5.9. I realise the performance index should be taken with a bit of a pinch of salt, but I wonder whether something's wrong. Given this paragraph from this MSDN article on Windows 7, I'd expect to see a high 6.X or possible a 7.X figure: In Windows 7, there are new random read, random write and flush assessments. Better SSDs can score above 6.5 all the way to 7.9. To be included in that range, an SSD has to have outstanding random read rates and be resilient to flush and random write workloads. In the Beta timeframe of Windows 7, there was a capping of scores at 1.9, 2.9 or the like if a disk (SSD or HDD) didn’t perform adequately when confronted with our random write and flush assessments. Feedback on this was pretty consistent, with most feeling the level of capping to be excessive. As a result, we now simply restrict SSDs with performance issues from joining the newly added 6.0+ and 7.0+ ranges. SSDs that are not solid performers across all assessments effectively get scored in a manner similar to what they would have been in Windows Vista, gaining no Win7 boost for great random read performance. How can I diagnose any performance issues with either the disk or how Windows 7 is handling it? Are there any particularly good tools you'd recommend? One note of curiosity: I couldn't install the firmware update (to 1916) until I changed my BIOS handling of the drive to ATA mode; after installing the firmware I tried to boot the Windows installation DVD - but that only worked after turning it back to AHCI mode (which I've left it in). Installing Windows 7 took longer than I expected - it sat at the "Windows is loading files" prompt for a very long time. Likewise it was on "Expanding files (0%)" for a long time. Since installation it's been fine though - but I don't know whether it's really providing quite as beefy performance as it should. EDIT: My netbook with the 64GB equivalent drive has a performance index of 6.6...

  Read the article

• Suspected brute force attack

  - by HarveySaayman

  Recently I acquired a dedicated server from a local ISP to play around with. As the tags suggest, its a windows server 2008 R2 machine. I've only had it for a few days, and no real traffic is going to it yet. I haven't even deployed a "real" website to it yet. Just a silly page so that I could check IIS, my host headers, DNS records, etc are all configured correctly. While playing around, I noticed a ton of Audit Failure entries in the event viewers security logs. It seems something is trying to access the administrator account, and failing. It smells like a brute force attack to me. My ISP gave me the account details of the administrator account and I used those to RDP into the box, which I've heard is not the securest of situations. I created myself another account and added myself to the administrator group, so im using that account to gain acceess to the machine now. In response to all of this i used http://strongpasswordgenerator.com/ to generate me some 20 character length strong passwords and changed all of my account passwords, even the SQL sa user. I also enabled the auto ban feature of FileZillaServer (my FTP server) My questions: 1) how can i detect this kind of thing better? 2) how can i protect my server from unauthorized access better? PS: I'm a software dev, not a sysadmin so please mind my server security idiot-ness-ness

  Read the article

• Win2008/IIS7/fx2.0 - 500.19 error

  - by Keith Barrows

  I installed new boxes at the beginning of the week. 1) Web Server on Win2008 x64, IIS 7 + all updates 2) DB Server on Win2008 x64, SQL 2008 Ent + all updates I configured my websites, set up host headers and DNS entries, worked through some problems on my handlers and finally got it all running Wednesday morning. Our team has been using it since then. This morning I came in and everyone of us is getting a 500 error. Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information Module IIS Web Core Notification Unknown Handler Not yet determined Error Code 0x80070005 Config Error Cannot read configuration file due to insufficient permissions Config File \?\C:\RivWorks\dev\web.config Requested URL http://dev.rivworks.com:80/login.aspx Physical Path Logon Method Not yet determined Logon User Not yet determined Config Source -1: 0: Links and More InformationThis error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error. I’ve gone through the KB articles, made sure IIS_IUSRS had read permissions and am now stumped. What bothers me is IIS is looking in \?\C:\ instead of just C:. What is happening? TIA

  Read the article

• Batch file to create many files with special characters

  - by MollyO

  Essential info: I have a file "DB_OUTPUT.TXT" with 304 lines that I need to turn into 304 files (one per line). Each line contains many special characters and may be up to tens of thousands of characters long. For these reasons, I'm having difficulty using a cmd.exe batch file (which limits the amount of input) and the echo command (which would try to execute each special character, short of me having to escape them all). I also have a file "DB_OUTPUT_FILENAMES.TXT" containing a distinct filename for each line-soon-to-be-file from "db_output.txt". So line 1 of DB_OUTPUT.TXT needs to be the body of a new file with a name equal to line 1 of DB_OUTPUT_FILENAMES.TXT. Extra info: As you may have guessed, DB_OUTPUT.TXT is output from a database; it contains 304 records with 6 or 7 columns at a fixed width with the last column being a SQL query. Each of these lines (db records) will be used as a script to create new database objects, which is why the special characters need to be preserved. Question: Is there a way to do this in a batch-like fashion? I'd be happy with either a Windows solution or a Linux one.

  Read the article

• Expectations for NTFS file recovery

  - by Fred Hamilton

  Yesterday I booted my XP system, and as I looked up a minute later I saw the light blue screen and tail-end of that pre-boot diskcheck Windows sometimes does if it finds an error (or was previously told to run a diskcheck drung the next boot). I didn't worry about it at the moment... But then I looked at my "scratch" disk, which was a 70% full, 750GB hard disk...and it now looks like it has been freshly formatted. It doesn't have a single file on it, just the hidden "System Volume Information" file and 750GB of freedom from data. I looked at some of the recovery tools from the Free NTFS partition recovery question and decided to try PC INSPECTOR™ File Recovery 4.x initially. It ran overnight and afterwards returned a list of thousands of files it could recover. The odd thing was that the filenames were lost, but the file extensions were not (WTF?). And all of the files were exactly 1,472kB in size. I recovered a dozen PDFs as a test, and 80% of them displayed OK despite being padded out to 1.5MB (though I assume any files 1472kB are hosed). My primary question is: Is this the best I can expect from any file recovery software when trying to recover NTFS files? Or is there perhaps something better out there? I assume this is as good as it gets, but wanted to check in with the experts first. Bonus questions: What might have happened to my drive? I didn't intentionally format it. I've never seen a disk error cause the drive to suddenly become a clean, reformatted drive. Could some malicious/confused software have told my PC to format my disk on reboot? Is that even a function Windows XP has? Why can the file extensions be recovered but not the filename? Does NTFS really treat them as separate entities? I thought I had 8.3 naming turned off, but maybe that had something to do with it. Or maybe it looks at the data in the file and guesses the extension?

  Read the article

• Core i7 c1e and speedstepping - BSOD on shutdown

  - by DeaconDesperado

  I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

  Read the article

• What applications do people use for windows folder management? How do you switch between folders in

  - by 118184489189799176898

  I'm always switching between client's folders in different applications like photoshop, sql manager, explorer etc. It's so slow to go between them, navigate to the folder and it's still too slow to copy and paste the directory etc. It's so annoying to do. Someone must have a good solution. I was thinking if there was a "recently accessed" folders list available within every folder explorer window... so in any application, if i go "file open" it will have something, somewhere that lists the recently accessed folders - that would be really helpful. I am aware of the recent places folder in win7, but this sucks because it is not sorted by date accessed. Perhaps if there was a way to change this then this would become a decent feature? Is there some application that already does this? i'm sure someone has already solved this issue in a more elegant solution than I can think off. I'm keen to know what programs people use or how people addresss this issue? Thanks...

  Read the article

• Mac updated just now, postgres now broken

  - by Dave

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• How to replace the domain name in a Wordpress database?

  - by Cristian

  I have a Wordpress database which was installed in a development environment... thus, all references to the site itself have a fixed IP address (say 192.168.16.2). Now, I have to migrate that database to a new Wordpress installation on a hosting. The problem is that the SQL dump contains a lot of references to the IP address, and I have to replace it with: my_domain.com. I could use sed or some other command to change the that from the command line, the problem is that there are a lot of configuration data which uses JSON. So what? Well, as you know, JSON arrays uses things like: s:4: to know how many chars an element has, and thus, if I just replace the IP with the domain name, the configuration files will get corrupted. I used an app for Windows some years ago that allows to change values in a database and takes care of the JSON arrays. Unfortunately, I forgot the name of the app... so the question is: do you know any app that allows me to do what I want?

  Read the article

• what can cause a folder to become indestructible?

  - by JustJeff

  I have a directory that I want to delete, but windows (xp sp3) is giving me the run-around and the folder is now effectively indestructible. Attempts to open the folder, either via explorer or cmd.exe are met with 'd:/temp/foo Is Not Accessible. Access is denied'. Attempts to delete the folder result in 'Cannot delete foo: The directory is not empty' So I can't delete it because supposedly it's not empty, but windows won't let me in it for some reason, so I can't clean it out first. There's nothing in it of consequence, and basically I just want to delete it at this point. Thinking that some other process must have a lock on it, I used the SysInternals 'handles' and Process Explorer to look for open handles with the directory name. These turned up no matches. (The directory name is not actually 'foo', it is something more unique but 'foo' is easier to type here). I put the machine through a restart, and the problem persists. I did a search for the folder name with regedit, to see what other apps might be aware of it. No match. The properties dialog was mildly interesting. The Read-Only attribute is 'semi-checked', i.e., the grayish check mark you get when some parts are and some parts aren't. Naturally I immediately unchecked this, and tried to delete the folder. No go. Opening properties again reveals the gray check mark next to Read-Only has returned. All the stats, size, size on disk, files, folders, all these are zero. There do not appear to be any shares on the folder, so that's not it either. Finally, I tried opening the partition's properties, and running the Tools/Error Checking utility. This didn't turn up any problems either. Fwiw, this directory was created by [a popular gui zip tool] when I tried to unpack a tar-and-zipped archive created on another system with command line utils. The archive was definitely corrupt, but I've never seen such a file do anything worse than crash the zip app, and certainly never leave permanent glitches in the file system. So what else can possibly be going on to make this folder behave this way?

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• What am I doing wrong in my config for MySql?

  - by Knight Hawk3

  When I load my my.conf with the config at the bottom Mysql fails to start and prints no errors. I am running Arch Linux (Updated) with the latest MySQL (5.5) and the latest nginx (Well latest in the repository, Not sure how to check. Only installed it today) I will give you any info you ask for. Thanks for helping! # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/run/mysqld/mysqld.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/run/mysqld/mysqld.sock skip-locking key_buffer = 16K max_allowed_packet = 1M table_cache = 4 sort_buffer_size = 64K read_buffer_size = 256K read_rnd_buffer_size = 256K net_buffer_length = 2K thread_stack = 64K # Don’t listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (using the “enable-named-pipe” option) will render mysqld useless! # #skip-networking server-id = 1 # Uncomment the following if you want to log updates #log-bin=mysql-bin # Uncomment the following if you are NOT using BDB tables skip-bdb # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = /var/lib/mysql/ #innodb_data_file_path = ibdata1:10M:autoextend #innodb_log_group_home_dir = /var/lib/mysql/ #innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 – 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 16M #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 skip-innodb [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 1M sort_buffer_size = 1M [myisamchk] key_buffer = 1M sort_buffer_size = 1M [mysqlhotcopy] interactive-timeout So what is my silly error?

  Read the article

• Courier IMAP always disconnects since update

  - by Raffael Luthiger

  Since one of our customers updated their server courier does not handle IMAP connections properly any more. POP3 works without any problems. When I try to test IMAP with telnet then it is always like this: $ telnet domain.com 143 Trying 188.40.46.214... Connected to domain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information. 01 LOGIN [email protected] test Connection closed by foreign host. I enabled debugging in the authdaemond but the output does not really help much: Apr 12 23:10:04 servername authdaemond: received auth request, service=imap, authtype=login Apr 12 23:10:04 servername authdaemond: authmysql: trying this module Apr 12 23:10:04 servername authdaemond: SQL query: SELECT login, password, "", uid, gid, homedir, maildir, quota, "", concat('disableimap=',disableimap,',disablepop3=',disablepop3) FROM mail_user WHERE login = '[email protected]' Apr 12 23:10:04 servername authdaemond: password matches successfully Apr 12 23:10:04 servername authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Apr 12 23:10:04 servername authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Right after the "Authenticated" line the output stops. There is no other message. And in no other log file I've checked I could find any other related message. The system was updated from Ubuntu 10.10 to 12.04. How could I get more information? Or does anybody have an idea what could go wrong here?

  Read the article

• Why does MOSS sometimes delete an existing user from a site?

  - by Jesse

  I'm experiencing an issue with a MOSS installation. I am using the Site Settings Permissions to add an Active Directory account as a valid user of a site. This entails validating that the user account name is correct via the 'Check Names' button, then giving them 'Contribute' permissions. Once this is done they appear as a user on the 'All People' page. This works fine and the user is able to access the site. At some point in the future (sometimes several days later) the user account is somehow removed as a valid user from the site. This site resides in a test environment so access is pretty well controlled; which has allowed us to rule out someone else going in and removing the user manually. This appears to be something that is being done by the system itself and we have no idea why. We can manually add the user back, but then it will eventually get removed again later. I have an admittedly limited understanding of SharePoint permissions, but I believe that SharePoint stores valid users in a SQL database and I would assume that when dealing with Active Directory accounts it would be storing the user name and probably the SID. It appears that for some reason this record is later getting deleted out of the database, as the users will suddenly disappear from the "All People" page and will start getting "Access Denied: You are not authorized..." messages when trying to access the site. Has anyone seen this behavior before?

  Read the article

• IIS SMTP unable to relay for domain on local network.

  - by MartinHN

  Hi I have a network with the following servers: EXCH01 - Exchange Server for @domain.com e-mails. TEST-REP01 - Local reporting server. Have IIS SMTP installed and configured. What happens on the TEST-REP01, is that I have a Windows Service that reads reports in a SQL server that is ready for delivery. All reports is sent one at a time, using the local SMTP server. It works perfectly, unless the recipient e-mail address is [email protected] - the domain that the EXCH01 server manages. I get the following error: Mailbox unavailable. The server response was: 5.7.1 Unable to relay for [email protected] What can I do to troubleshoot this further? I can't seem to find useful information in the SMTP log: 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 EHLO - +TEST-REP01 250 0 210 15 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 MAIL - +FROM:<[email protected]> 250 0 44 31 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 RCPT - +TO:<[email protected]> 550 0 50 28 0 SMTP - - - - 2011-01-05 03:01:38 192.168.8.168 TEST-REP01 SMTPSVC1 TEST-REP01 192.168.8.168 0 QUIT - TEST-REP01 240 0 50 28 0 SMTP - - - - Relay access on the local IIS (TEST-REP01) are set to allow 127.0.0.1, TEST-REP01 and other servers such as TEST-WEB01. DNS settings on the local network is not domain.com - but companyname-domain.local.

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• AWS EC2 - How to specify an IAM role for an instance being launched via awscli

  - by Skaperen

  I am using the "aws ec2 run-instances" command (from the awscli package) to launch an instance in AWS EC2. I want to set an IAM role on the instance I am launching. The IAM role is configured and I can use it successfully when launching an instance from the AWS web UI. But when I try to do this using that command, and the "--iam-instance-profile" option, it failed. Doing "aws ec2 run-instances help" shows Arn= and Name= subfields for the value. When I try to look up the Arn using "aws iam list-instance-profiles" it gives this error message: A client error (AccessDenied) occurred: User: arn:aws:sts::xxxxxxxxxxxx:assumed-role/shell/i-15c2766d is not authorized to perform: iam:ListInstanceProfiles on resource: arn:aws:iam::xxxxxxxxxxxx:instance-profile/ (where xxxxxxxxxxxx is my AWS 12-digit account number) I looked up the Arn string via the web UI and used that via "--iam-instance-profile Arn=arn:aws:iam::xxxxxxxxxxxx:instance-profile/shell" on the run-instances command, and that failed with: A client error (UnauthorizedOperation) occurred: You are not authorized to perform this operation. If I leave off the "--iam-instance-profile" option entirely, the instance will launch but it will not have the IAM role setting I need. So the permission seems to have something to do with using "--iam-instance-profile" or accessing IAM data. I repeated several times in case of AWS glitches (they happen sometimes) and no success. I suspected that perhaps there is a restriction that an instance with an IAM role is not allowed to launch an instance with a more powerful IAM role. But in this case, the instance I am doing the command in has the same IAM role that I am trying to use. named "shell" (though I also tried using another one, no luck). Is setting an IAM role not even permitted from an instance (via its IAM role credentials)? Is there some higher IAM role permission needed to use IAM roles, than is needed for just launching a plain instance? Is "--iam-instance-profile" the appropriate way to specify an IAM role? Do I need to use a subset of the Arn string, or format it in some other way? Is it possible to set up an IAM role that can do any IAM role accesses (maybe a "Super Root IAM" ... making up this name)? FYI, everything involves Linux running on the instances. Also, I am running all this from an instance because I could not get these tools installed on my desktop. That and I do not want to put my IAM user credentials on any AWS storage as advised by AWS here. after answered: I did not mention the launching instance permission of "PowerUserAccess" (vs. "AdministratorAccess") because I did not realize additional access was needed at the time the question was asked. I assumed that the IAM role was "information" attached to the launch. But it really is more than that. It is a granting of permission.

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by blade

  Hi, I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• MySQL Config on Large Machine

  - by Jonathon

  We have a Windows 2003 Enterprise Edition server (64bit) running only MySQL 5.1.45 64-bit. It has 16G RAM and 10T of hard-drive space in RAID 10. We are having horrible performance from mysqld (85-100% CPU utilization). We were running a smaller machine with better performance, so I am assuming our my.ini file is not correct for our current machine. The my.ini file is as follows: [client] port=3306 [mysql] default-character-set=latin1 [mysqld] port=3306 basedir="D:/MySQL/" datadir="D:/MySQL/data" default-character-set=latin1 default-storage-engine=MYISAM sql-mode="" skip-innodb skip-locking max_allowed_packet = 1M max_connections=800 myisam_max_sort_file_size=5G myisam_sort_buffer_size=500M table_open_cache = 512 table_cache=8000 tmp_table_size=30M query_cache_size=50M thread_cache_size=128 key_buffer_size=3072M read_buffer_size=2M read_rnd_buffer_size=16M sort_buffer_size=2M #replication settings (this is the master) log-bin=log server-id = 1 Does anyone see anything wrong with this setup? For a machine with this much RAM, why in the world would mysqld eat up so much CPU? I know we can optimize some queries, etc., but it did run okay on a smaller machine, so I am pretty sure it is the config. Thanks in advance for any help.

  Read the article

< Previous Page | 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437  | Next Page >