Search Results

Search found 5887 results on 236 pages for 'cpu temperature'.

Page 144/236 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Hard drive trouble trying to recover data

  - by DEmetria

  How to get my information off my old hard drive to my new one So I wanna know can anyone help me Laptop stop working and have me a hard disk error I finally got it to boot up again after playing with it, and I tried to copy my stuff and it froze on me and hasn't booted since Bought another hard drive and ended up making an image of my friends computer but couldn't get my stuff off my old drive so I tried the freezer method now and I put it in for two hours and it didn't boot but I'm putting it back in for 12hrs So my end result is I just wanna get my drive up enough to create an image of my CPU to my new hard drive and is there another way I could do it if my hard drive won't boot!! But here's the kickers when I made the image of my friends computerized up loaded it to the new hard drive and I have my old hard drive plugged up to an USB enclosure so I need help. Thanks in advance!!!

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• Foward slash in kibana 3 query

  - by G Mawr

  I'm trying to add a query that will match a request that ends with a slash, like this one: n.n.n.n - - [16/Oct/2013:16:40:41 +0100] "GET / HTTP/1.1" 200 25058 "-" "Mozilla/5.0 (iPad; CPU OS 7_0_2 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A501 Safari/9537.53" I'm using the Lucene query type. If my query is set to *, I see the event. If I set it to request:"css", I see CSS requests, as expected. However, all of the following yield no results: request:"/" request:"\/" request:"\\/" I tried a Lucene regular expression, with no luck: request:/\// I note that someone else is getting what appears to be a similar issue, although that's on Kibana 2: https://github.com/rashidkpc/Kibana/issues/401 How can I query for requests that end with a / character?

  Read the article

• How to force a resolution in linux?

  - by hi

  I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• How to limit disk performance?

  - by DrakeES

  I am load-testing a web application and studying the impact of some config tweaks (related to disk i/o) on the overall app performance, i.e. the amount of users that can be handled simultaneously. But the problem is that I hit 100% CPU before I can see any effect of the disk-related config settings. I am therefore wondering if there is a way I could deliberately limit the disk performance so that it becomes the bottleneck and the tweaks I am trying to play with actually start impacting performance. Should I just make the hard disk busy with something else? What would serve the best for this purpose? More details (probably irrelevant, but anyway): PHP/Magento/Apache, studying the impact of apc.stat. Setting it to 0 makes APC not checking PHP scripts for modification which should increase performance where disk is the bottleneck. Using JMeter for benchmarking.

  Read the article

• Monitoring and terminating a hanged process in Linux

  - by Yoav

  Hi, I'm writing a script that runs many simultaneous processes that run the "dig" command. Once in a while (relatively rare, but happens in every run since I run dig many times) the dig command hangs with 0% CPU. Therefore, my script never terminates. I've created a monitor process for each dig command I run, which terminates it after a while, but I was wondering if there isn't a simpler and more efficient way to run a process with a pre-determined "expiration date", i.e. if the process runs more then X seconds it gets a signal that terminates it. Thanks!

  Read the article

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• RAID P410i and P812 performance issues

  - by Alexey

  I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

  Read the article

• How many users are "many users"?

  - by kemp

  I need to find a solution for a website which is struggling under load. The site gets ~500 simultaneous connections during peak time, and counts around 42k hits per day. It's a wordpress based site bridged with a vbulletin forum with a lot of contents and a fairly complex structure which makes intensive use of the database. I already implemented code level full page caching (without this the server just crashes), and configured all other caching directives as well as combining css files and the like to limit http requests as much as possible. I need to understand if there is more that can be done via software or if the load is just too much for the server to handle and it needs to be upgraded, because the server goes down occasionally during peak times. Can't access the server now, but it's a dedicated CentOS machine (I think 4GB ram, can't say what CPU) running apache/mysql. So back to the main question: how can I know when the users are just too many?

  Read the article

• Xencenter guest will not boot

  - by Georgi

  I have xen server free edition. Today one of the guest VM was very loaded and I decided to reboot it. Now it can not start. It is with Ubuntu 10.04 Server. The machine is shown as running in xsconsole and in windows Xen control center. It shows 100 % CPU and 100 % RAM usage. The console shows nothing (it doesn't show boot process). And the worst is that I have no backup. Is there any advice how to see what is going on. I exported it to file and now I am trying it to import it into another server, because I can't reboot the physical server it runs on. Can this save me (the reboot of the server) Thank you

  Read the article

• General video performance affected on Mac OSX 10.5 (PowerBook G4)

  - by r0ca

  Hi all, I'm quite new to Mac and I just got a PowerBook G4 for free. I installed OSX 10.5 on it and for the first two weeks, everything was going kinda smooth even if this is similar to a P3. I'm not expecting awsome video performance but at least be able to watch some videos from Youtube. Yesterday night, I installed Office 2008 for mac and this morning, even after a reboot, my computer is way much slower that I used to know. I watched a youtube video and the framerate was 1:1. I also noticed it on flash adds, it's way slower! Is there anything that I can do to increase video performance, see what's the process list running and taking more GPU or CPU, what's taking more ram and stuff like that?! What do you guys, Mac pros, would do on an old laptop with OSX 10.5 Thanks!

  Read the article

• How to diagnose very slow pagefile

  - by svick

  Quite often, one of the applications I use freezes (“does not respond”) for a while, in extreme cases for few minutes. This happens especially when when switching apps. During this time, the HDD light flashes constantly and perfmon show that HDD is used 100% of the time (OTOH, CPU isn't) and that pagefile is being read (which is to be expected when switching apps), but at a very slow rate. When I sort the disk table in perfmon by read or write, the file read and wrote the most is the pagefile, but it's still quite low rate (I don't remember the numbers). How can I diagnose what's causing this? I use Windows Vista, and the computer is quite ordinary two years old laptop.

  Read the article

• postgres memory allocation tuning 2

  - by pstanton

  i've got a Ubuntu Linux system with 12Gb memory most of which (at least 10Gb) can be allocated solely to postgres. the system also has a 6 disk 15k SCSI RAID 10 setup. The process i'm trying to optimise is twofold. firstly a single threaded, single connection will do many inserts into 2-4 tables linked by foreign key. secondly many different complex queries are run against the resulting data, using group by extensively. this part especially needs to be optimised. i have four of these processes running at once in order to make use of the quad core CPU, therefore there will generally be no more than 5 concurrent connections (1 spare for admin tasks). what configuration changes to the default Postgres config would you recommend? I'm looking for the optimum values for things like work_mem, shared_buffers etc. relevant doco thanks!

  Read the article

• How to install apt-get on a busybox embedded system?

  - by Daniel YC Lin

  My embedded system is for sh4 CPU. The debian distribution may get on http://www.si-linux.co.jp/pub/debian-sh/lenny-sh4/ I get the apt*.deb and extract the data.tar.gz. After setup the /etc/apt/sources.list, I could do 'apt-get update'. But it missing dependency when I try to run 'apt-get install ntpdate'. Is there any method to let apt-get ignore some base packages? Because those package is build by my original embedded system.(eg. busybox).

  Read the article

• Can I get "disk utilization" from a NetApp filer via SNMP?

  - by Andrew

  On a NetApp filer's command line I'm running "sysstat -u" to show disk utilization, (actually the utilization of the single busiest disk). By disk utilization, I mean "percent of time the disk is busy", not "how much space on the disk is being used to store data/metadata". Is there a way to get disk utilization info through SNMP? The netapp.mib file doesn't appear to expose this. It does have CPU utilization, disk usage & capacity information, etc, but not disk utilization. The MIB-II (rfc1213) seems to be the only other information exposed by the filer through SNMP. I hope I am missing something. The "CP (consistency point) time" metric is exposed through the NETAPP-MIB in SNMP, but this seems to only partially correlate with disk utilization under write load, and not really at all under read load.

  Read the article

• PIC C - USB_CDC_GETC() and retrieving strings.

  - by Adam

  Hi all, I'm programming a PIC18F4455 Microcontroller using PIC C. I'm using the USB_CDC.h header file. I have a program on the computer sending a string such as "W250025". However, when I use usb_cdc_getc() to get the first char, it freezes. Sometimes the program sends only 'T', so I really want to just get the first character. Why does my code never execute past received=usb_cdc_getc(); when I send "W250025"? if (usb_cdc_kbhit()) { //printf(lcd_putc, "Check 3"); delay_ms(3000); printf(lcd_putc, "\f"); received = usb_cdc_getc(); printf(lcd_putc, "Received "); lcd_putc(received); delay_ms(3000); printf(lcd_putc, "\f"); if (received == 'W'){ //waveform disable_interrupts(INT_TIMER1); set_adc_channel(0); load_and_print_array(read_into_int(), read_into_int());} else if (received == 'T'){ //temperature set_adc_channel(1); enable_interrupts(INT_TIMER1);} }

  Read the article

• SQL Server 2008 data directiories in SSD

  - by Kuroro

  I am going to install a new SQL server 2008 instance on my development/testing machine. My machine have one 7200rpm 500GB SATA Disk (C:OS) and one Intel X25-G2 80GB SSD(D:). Details machine config is as follow: CPU:i7 860 RAM:8GB Microsoft said I have an option to place following directories in different disk. So I plan to place User database & Temp DB on SSD and rest of it on traditional disk. Is it a good choice for gaining a performance boost in fast SSD? Data root directory :C:\Program Files\Microsoft SQL Server User database directory D:\Data User log directory C:\Logs Temp DB directory D:\TempDB Temp Log directory C:\TempDB Backup directory C:\Backups

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• Can Resource Governor for SQL Server 2008 be scripted?

  - by blueberryfields

  I'm looking for a method to, in real-time, automatically, adjust Resource Governor settings. Here's an example: Imagine that I have 10 applications, each hitting a different database on the same database machine. For normal operations, they do not hit the database very hard, so I might want each one to have 10% CPU power reserved. Occasionally, though, one or two of them might spike, and run an operation which could really use the extra power to run faster. I'd like to be able to adjust to compensate (say, reducing the non-spiking apps to 3%, and splitting the difference between the spiking apps). This is a kind of poor man's method of trying to dynamically adjust resource allocation and priorities. Scripts (or something script-like) is preferred, since the requirement is for meta-level adjustments to be possible in real-time, also.

  Read the article

• Why can't I grant exec on dbms_lock.sleep() OR create a procedure using it (but I can run it fine on its own)

  - by Richard Green

  I am trying to write a small bit of PL/SQL that has a non-CPU burning sleep in it. The following works in sqldeveloper begin dbms_lock.sleep(5); end; BUT (as the same user), I can't do the following: create or replace procedure sleep(seconds in number) is begin dbms_lock.sleep(seconds); end; without the error "identifer "DBMS_LOCK" must be declared... Funny as I could run it without a procedure. Just as strange, when I log in as a DBA, I can run the command grant exec on dbms_lock to public; and I get ERROR at line 1: ORA-00990: missing or invalid privilege This is oracle version "Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production"

  Read the article

• Should I upgrade my VPS to a dedicated host?

  - by Mr. Hedgehog

  I've been running a website for 4 months now and in that time, it has grown from a few hundred unique visits/day to about 30,000 unique visits/day. I have been on Linode the whole time and have steadily upgraded to a 4GB node. Unfortunately, my app is very MySQL heavy and even with caching, the server is frequently ceasing to respond in peak times. During these times, all 4 cores are maxed on the machine (though Linode 4GB only provides a 1/5 share of the CPU). The only way to get it running again is to restart MySQL. I don't really know what to do. I have tried optimising the InnoDB settings and it seems to not be helping. Would moving to a Dedicated host be a good solution? I can get 4-5x the power of my node for a similar price - and with decent providers too.

  Read the article

• Troubleshooting a high SQL Server Compilation/Batch-Ratio

  - by Sleepless

  I have a SQL Server (quad core x86, 4GB RAM) that constantly has almost the same values for "SQLServer:SQL Statistics: SQL compilations/sec" and "SQLServer:SQL Statistics: SQL batches/sec". This could be interpreted as a server running 100% ad hoc queries, each one of which has to be recompiled, but this is not the case here. The sys.dm_exec_query_stats DMV lists hundreds of query plans with an execution_count much larger than 1. Does anybody have any idea how to interpret / troubleshoot this phenomenon? BTW, the server's general performance counters (CPU,I/O,RAM) all show very modest utilization.

  Read the article

• Windows hangs on Rename, Delete and Move for specific MKV files

  - by Creativehavoc

  I have been googling this issue for a long time, and no full solutions seem to be out there. For certain mkv files, windows hangs when moving, copying, or deleting. These files play fine in a player such as GOM player. System: a fast windows 7, 64 bit box. Results: CPU change is negligible Memory usage rockets up to ~100% In cased of delete or move, "discovering files" dialogue box stays up for a long time Rename simply shows spinning icon until it finishes Action is completed after EXTREMELY long amount of time Memory usage does not return to normal "Fixes:" Disable thumbnail creation (helps for some cases) After move/rename/delete kill explorer with taskmanager, and relaunch to re-claim your memory Even with the thumbnails turned off, the issue persists. I have also tried re-muxing a file, which worked fine, but still resulted in a file with the same above issues.

  Read the article

• Slowdown after repeated hibernation in XP SP3

  - by John

  I have a Dell laptop w/dual core and 4 gigs of memory. Recently my machine has started to go off in never never land for 5 to 20 minutes at a time with a lot of hard drive churning. Eventually it comes back and everything operates properly. If I manage to have task manager up CPU usage shows no more then 3 to 5% during this process. I am on a corporate network and have very good virus protection in place. The problem seems to have increased in frequency since I let an update happen to IE8 and/or I started using hibernate more frequently. Any ideas or suggestions? TIA J

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >