Search Results

Search found 8001 results on 321 pages for 'empty'.

Page 144/321 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

  • Naming a class that decides to retrieve things from cache or a service + architecture evaluation

    - by Thomas Stock
    Hi, I'm a junior developer and I'm working on a pet project that I want to learn as much as possible from. I have the following scenario: There's a WCF service that I use to retrieve and update data, lets say Cars. So it's called CarWCFService and has a GetCars(), SaveCar(), ... . It implements interface ICarService. This isn't the Actual WCF service but more like a wrapper around it. Upon retrieving data from the service, I want to store them in local memory, as cache. I have made a class for this called CarCacheService which also implements interface ICarService. (I will explain later why it implements ICarService) I don't want client code to be calling these implementations. Instead, I want to create a third implementation for ICarService that tries to read from the CarCacheService before calling the WCFCarService, stores retrieved data in the CarCacheService, etc. 3 questions: How do I name this third class? I was thinking about something as simple as CarService. This does not really says what the service does exactly, tho. Is the naming for the other classes good? Would this naming and architecture be obvious for future programmers? This is my biggest concern. Does this architecture make sense? The reason that I implement ICarService on the CarCacheService is mainly because it allows me to fake the WCFService while debugging. I can store dummy data in a CarCacheService instance and pass it to the CarService, together with an(other) empty CarCacheService. If I made CacheCarService and WCFService public I could let client code decide if they want to drop the caching and just work directly on the WCFService.

    Read the article

  • Executing Components in an Entity Component System

    - by John
    Ok so I am just starting to grasp the whole ECS paradigm right now and I need clarification on a few things. For the record, I am trying to develop a game using C++ and OpenGL and I'm relatively new to game programming. First of all, lets say I have an Entity class which may have several components such as a MeshRenderer,Collider etc. From what I have read, I understand that each "system" carries out a specific task such as calculating physics and rendering and may use more that one component if needed. So for example, I would have a MeshRendererSystem act on all entities with a MeshRenderer component. Looking at Unity, I see that each Gameobject has, by default, got components such as a renderer, camera, collider and rigidbody etc. From what I understand, an entity should start out as an empty "container" and should be filled with components to create a certain type of game object. So what I dont understand is how the "system" works in an entity component system. http://docs.unity3d.com/ScriptReference/GameObject.html So I have a GameObject(The Entity) class like class GameObject { public: GameObject(std::string objectName); ~GameObject(void); Component AddComponent(std::string name); Component AddComponent(Component componentType); }; So if I had a GameObject to model a warship and I wanted to add a MeshRenderer component, I would do the following: warship->AddComponent(new MeshRenderer()); In the MeshRenderers constructor, should I call on the MeshRendererSystem and "subscribe" the warship object to this system? In that case, the MeshRendererSystem should probably be a Singleton("shudder"). From looking at unity's GameObject, if each object potentially has a renderer or any of the components in the default GameObject class, then Unity would iterate over all objects available. To me, this seems kind of unnecessary since some objects might not need to be rendered for example. How, in practice, should these systems be implemented?

    Read the article

  • Netbook performs hard shutdown without warning on low battery power

    - by Steve Kroon
    My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

    Read the article

  • Getting codebaseHQ SVN ChangeLog data in your application

    - by saifkhan
    I deploy apps via ClickOnce. After each deployment we have to review the changes made and send out an email to the users with the changes. What I decided now to do is to use CodebaseHQ’s API to access a project’s SVN repository and display the commit notes so some users who download new updates can check what was changed or updated in an app. This saves a heck of a lot of time, especially when your apps are in beta and you are making several changes daily based on feedback. You can read up on their API here Here is a sample on how to access the Repositories API from a windows app Public Sub GetLog() If String.IsNullOrEmpty(_url) Then Exit Sub Dim answer As String = String.Empty Dim myReq As HttpWebRequest = WebRequest.Create(_url) With myReq .Headers.Add("Authorization", String.Format("Basic {0}", Convert.ToBase64String(Encoding.ASCII.GetBytes("username:password")))) .ContentType = "application/xml" .Accept = "application/xml" .Method = "POST" End With Try Using response As HttpWebResponse = myReq.GetResponse() Using sr As New System.IO.StreamReader(response.GetResponseStream()) answer = sr.ReadToEnd() Dim doc As XDocument = XDocument.Parse(answer) Dim commits = From commit In doc.Descendants("commit") _ Select Message = commit.Element("message").Value, _ AuthorName = commit.Element("author-name").Value, _ AuthoredDate = DateTime.Parse(commit.Element("authored-at").Value).Date grdLogData.BeginUpdate() grdLogData.DataSource = commits.ToList() grdLogData.EndUpdate() End Using End Using Catch ex As Exception MsgBox(ex.Message) End Try End Sub

    Read the article

  • passing data to php in ajax [closed]

    - by MertMETIN
    i try to pass my data, actually checkboxes has some datas in their ids, and i read try to read them. like that, <input align="right" type=checkbox name="checkArtist[]" class="checkClass" id ="{$movieId}-{$mCast.id}"></li> dont worry about {$movieId}-{$mCast.id} They are template lite tags. I successfully read checkboxes datas in ajax side. The problem is that i cannot send these datas to my php. var artistIds = new Array(); $(".p16 input:checked").each()(function(){ artistIds.push($(this).attr('id')); }); $.post('/json/crewonly/deleteDataAjax2', { 'artistIds': artistIds },function(response){ if(response=='ok') alert("ok"); }); above code is my ajax but in php side $artistIds is always empty. I found a topic in stackoverflow http://stackoverflow.com/questions/5571646/how-to-pass-a-javascript-array-via-jquery-post-so-that-all-its-contents-are-acce It says how to pass js arrays $.post('/url/to/page', {'someKeyName': variableName}); This is same with my code. What's going wrong ?

    Read the article

  • How to implement fast search on Azure Blob?

    - by Vicky
    I am done with writing the code to upload files (text files) to azure blob storage. Now I want to provide search based on text files content. For ex. If I search for "Hello" then the name of files that contains "Hello" words should appear in search result. Here my code to search class BlobSearch { static void Main(string[] args) { string searchText = "Hello"; CloudStorageAccount account = CloudStorageAccount.Parse(azureConString); CloudBlobClient blobClient = account.CreateCloudBlobClient(); CloudBlobContainer blobContainer = blobClient.GetContainerReference("MyBlobContainer"); blobContainer.FetchAttributes(); var blobItemList = blobContainer.ListBlobs(); foreach (var item in blobItemList) { string line = string.Empty; CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(item.Uri.ToString()); if(blockBlob.Name.Contains(".txt")) { int lineno = 1; using (var stream = blockBlob.OpenRead()) { using (StreamReader reader = new StreamReader(stream)) { while ((line = reader.ReadLine()) != null) { if (line.IndexOf(searchText) != -1) { Console.WriteLine("Line : " + lineno +" => "+ blockBlob.Name); } lineno++; } } } } } Console.WriteLine("SEARCH COMPLETE"); Console.ReadLine(); } } Above code is working but it is too slow. Is there any way to do it faster or Can improve above code.

    Read the article

  • Drawing particles as a smooth blob

    - by Nömmik
    I'm new to game/graphics development and I'm playing around with particles (in 2D). I want to draw particles close to each other as a blob, just as liquid/water. I do not want to draw big circles overlapping as the blob won't be smooth (and too big). I don't really know physics but I assume what I want is something looking similar to surface tension. I haven't been able to find anything on stackexchange or on Google (maybe I do not know the correct keywords?). So far I have found two possible solutions, but I am unable to find any concrete information about algorithms. One of them is to calculate the concave hull of particles I consider being a blob. I can calculate the blob by creating an equivalence class (on the relation "close to each other"). Strangely enough I haven't been able to find any algorithm explaining how to calculate the concave hull. Many posts (and among stackexchange) links to libraries or commercial products that do this (I need libraries to work in C#), but never any algorithm. Also this solution might have a problem with a circle of particles, which would not detect the empty space in the middle. While researching concave hull I stumbled upon something called alpha shapes. Which seems to be exactly what I want to do, however just as with concave hull I haven't found any source explaining how they actually work. I have found some presentation materials but not enough to go on. It's like a big secret everyone knows except me :-/ After calculating the concave hull or alpha shape I want to make it a Bézier curve to make it smooth and nice. Although I do find my approach a bit too complex, maybe I am trying to solve this the wrong way? If you can either suggest any other solution to my problem, or explain the pieces I am missing I would be very happy and grateful :-) Thanks.

    Read the article

  • Knockout with ASP.Net MVC2 - HTML Extension Helpers for input controls

    - by Renso
    Goal: Defining Knockout-style input controls can be tedious and also may be something that you may find obtrusive, mixing your HTML with data bind syntax as well as binding your aspx, ascx files to Knockout. The goal is to make specifying Knockout specific HTML tags easy, seamless really, as well as being able to remove references to Knockout easily. Environment considerations: ASP.Net MVC2 or later Knockoutjs.js How to:     public static class HtmlExtensions     {         public static string DataBoundCheckBox(this HtmlHelper helper, string name, bool isChecked, object htmlAttributes)         {             var builder = new TagBuilder("input");             var dic = new RouteValueDictionary(htmlAttributes) { { "data-bind", String.Format("checked: {0}", name) } };             builder.MergeAttributes(dic);             builder.MergeAttribute("type", @"checkbox");             builder.MergeAttribute("name", name);             builder.MergeAttribute("value", @"true");             if (isChecked)             {                 builder.MergeAttribute("checked", @"checked");             }             return builder.ToString(TagRenderMode.SelfClosing);         }         public static MvcHtmlString DataBoundSelectList(this HtmlHelper helper, string name, IEnumerable<SelectListItem> selectList, String optionLabel)         {             var attrProperties = new StringBuilder();             attrProperties.Append(String.Format("optionsText: '{0}'", name));             if (!String.IsNullOrEmpty(optionLabel)) attrProperties.Append(String.Format(", optionsCaption: '{0}'", optionLabel));             attrProperties.Append(String.Format(", value: {0}", name));             var dic = new RouteValueDictionary { { "data-bind", attrProperties.ToString() } };             return helper.DropDownList(name, selectList, optionLabel, dic);         }         public static MvcHtmlString DataBoundSelectList(this HtmlHelper helper, string name, IEnumerable<SelectListItem> selectList, String optionLabel, object htmlAttributes)         {             var attrProperties = new StringBuilder();             attrProperties.Append(String.Format("optionsText: '{0}'", name));             if (!String.IsNullOrEmpty(optionLabel)) attrProperties.Append(String.Format(", optionsCaption: '{0}'", optionLabel));             attrProperties.Append(String.Format(", value: {0}", name));             var dic = new RouteValueDictionary(htmlAttributes) {{"data-bind", attrProperties}};             return helper.DropDownList(name, selectList, optionLabel, dic);         }         public static String DataBoundSelectList(this HtmlHelper helper, String options, String optionsText, String value)         {             return String.Format("<select data-bind=\"options: {0},optionsText: '{1}',value: {2}\"></select>", options, optionsText, value);         }         public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes)         {             var dic = new RouteValueDictionary(htmlAttributes);             dic.Add("data-bind", String.Format("value: {0}", name));             return helper.TextBox(name, value, dic);         }         public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, string observable, object value, object htmlAttributes)         {             var dic = new RouteValueDictionary(htmlAttributes);             dic.Add("data-bind", String.Format("value: {0}", observable));             return helper.TextBox(name, value, dic);         }         public static MvcHtmlString DataBoundTextArea(this HtmlHelper helper, string name, string value, int rows, int columns, object htmlAttributes)         {             var dic = new RouteValueDictionary(htmlAttributes);             dic.Add("data-bind", String.Format("value: {0}", name));             return helper.TextArea(name, value, rows, columns, dic);         }         public static MvcHtmlString DataBoundTextArea(this HtmlHelper helper, string name, string observable, string value, int rows, int columns, object htmlAttributes)         {             var dic = new RouteValueDictionary(htmlAttributes);             dic.Add("data-bind", String.Format("value: {0}", observable));             return helper.TextArea(name, value, rows, columns, dic);         }         public static string BuildUrlFromExpression<T>(this HtmlHelper helper, Expression<Action<T>> action)         {             var values = CreateRouteValuesFromExpression(action);             var virtualPath = helper.RouteCollection.GetVirtualPath(helper.ViewContext.RequestContext, values);             if (virtualPath != null)             {                 return virtualPath.VirtualPath;             }             return null;         }         public static string ActionLink<T>(this HtmlHelper helper, Expression<Action<T>> action, string linkText)         {             return helper.ActionLink(action, linkText, null);         }         public static string ActionLink<T>(this HtmlHelper helper, Expression<Action<T>> action, string linkText, object htmlAttributes)         {             var values = CreateRouteValuesFromExpression(action);             var controllerName = (string)values["controller"];             var actionName = (string)values["action"];             values.Remove("controller");             values.Remove("action");             return helper.ActionLink(linkText, actionName, controllerName, values, new RouteValueDictionary(htmlAttributes)).ToHtmlString();         }         public static MvcForm Form<T>(this HtmlHelper helper, Expression<Action<T>> action)         {             return helper.Form(action, FormMethod.Post);         }         public static MvcForm Form<T>(this HtmlHelper helper, Expression<Action<T>> action, FormMethod method)         {             var values = CreateRouteValuesFromExpression(action);             string controllerName = (string)values["controller"];             string actionName = (string)values["action"];             values.Remove("controller");             values.Remove("action");             return helper.BeginForm(actionName, controllerName, values, method);         }         public static MvcForm Form<T>(this HtmlHelper helper, Expression<Action<T>> action, FormMethod method, object htmlAttributes)         {             var values = CreateRouteValuesFromExpression(action);             string controllerName = (string)values["controller"];             string actionName = (string)values["action"];             values.Remove("controller");             values.Remove("action");             return helper.BeginForm(actionName, controllerName, values, method, new RouteValueDictionary(htmlAttributes));         }         public static string VertCheckBox(this HtmlHelper helper, string name, bool isChecked)         {             return helper.CustomCheckBox(name, isChecked, null);         }          public static string CustomCheckBox(this HtmlHelper helper, string name, bool isChecked, object htmlAttributes)         {             TagBuilder builder = new TagBuilder("input");             builder.MergeAttributes(new RouteValueDictionary(htmlAttributes));             builder.MergeAttribute("type", "checkbox");             builder.MergeAttribute("name", name);             builder.MergeAttribute("value", "true");             if (isChecked)             {                 builder.MergeAttribute("checked", "checked");             }             return builder.ToString(TagRenderMode.SelfClosing);         }         public static string Script(this HtmlHelper helper, string script, object scriptAttributes)         {             var pathForCRMScripts = ScriptsController.GetPathForCRMScripts();             if (ScriptOptimizerConfig.EnableMinimizedFileLoad)             {                 string newPathForCRM = pathForCRMScripts + "Min/";                 ScriptsController.ServerPathMapper = new ServerPathMapper();                 string fullPath = ScriptsController.ServerMapPath(newPathForCRM);                 if (!File.Exists(fullPath + script))                     return null;                 if (!Directory.Exists(fullPath))                     return null;                 pathForCRMScripts = newPathForCRM;             }             var builder = new TagBuilder("script");             builder.MergeAttributes(new RouteValueDictionary(scriptAttributes));             builder.MergeAttribute("type", @"text/javascript");             builder.MergeAttribute("src", String.Format("{0}{1}", pathForCRMScripts.Replace("~", String.Empty), script));             return builder.ToString(TagRenderMode.SelfClosing);         }         private static RouteValueDictionary CreateRouteValuesFromExpression<T>(Expression<Action<T>> action)         {             if (action == null)                 throw new InvalidOperationException("Action must be provided");             var body = action.Body as MethodCallExpression;             if (body == null)             {                 throw new InvalidOperationException("Expression must be a method call");             }             if (body.Object != action.Parameters[0])             {                 throw new InvalidOperationException("Method call must target lambda argument");             }             // This will build up a RouteValueDictionary containing the controller name, action name, and any             // parameters passed as part of the "action" parameter.             string name = body.Method.Name;             string controllerName = typeof(T).Name;             if (controllerName.EndsWith("Controller", StringComparison.OrdinalIgnoreCase))             {                 controllerName = controllerName.Remove(controllerName.Length - 10, 10);             }             var values = BuildParameterValuesFromExpression(body) ?? new RouteValueDictionary();             values.Add("controller", controllerName);             values.Add("action", name);             return values;         }         private static RouteValueDictionary BuildParameterValuesFromExpression(MethodCallExpression call)         {             // Build up a RouteValueDictionary containing parameter names as keys and parameter values             // as values based on the MethodCallExpression passed in.             var values = new RouteValueDictionary();             ParameterInfo[] parameters = call.Method.GetParameters();             // If the passed in method has no parameters, just return an empty dictionary.             if (parameters.Length == 0)             {                 return values;             }             for (int i = 0; i < parameters.Length; i++)             {                 object parameterValue;                 Expression expression = call.Arguments[i];                 // If the current parameter is a constant, just use its value as the parameter value.                 var constant = expression as ConstantExpression;                 if (constant != null)                 {                     parameterValue = constant.Value;                 }                 else                 {                     // Otherwise, compile and execute the expression and use that as the parameter value.                     var function = Expression.Lambda<Func<object>>(Expression.Convert(expression, typeof(object)),                                                                    new ParameterExpression[0]);                     try                     {                         parameterValue = function.Compile()();                     }                     catch                     {                         parameterValue = null;                     }                 }                 values.Add(parameters[i].Name, parameterValue);             }             return values;         }     }   Some observations: The first two DataBoundSelectList overloaded methods are specifically built to load the data right into the drop down box as part of the HTML response stream rather than let Knockout's engine populate the options client-side. The third overloaded method does it client-side via the viewmodel. The first two overloads can be done when you have no requirement to add complex JSON objects to your lists. Furthermore, why render and parse the JSON object when you can have it all built and rendered server-side like any other list control.

    Read the article

  • Displaying the Saved Pictures in the Windows Phone 8 emulator

    - by Laurent Bugnion
    One cool feature of the Windows Phone emulator is that it allows you to select pictures from your app (using the PhotoChooserTask) without having to try your app on a physical device. For example, this code (which I used in some of my recent presentations) will trigger the Photo Chooser UI to be displayed on the emulator too: private Action<IEnumerable<IImageFileInfo>> _callback; public void SelectFiles(Action<IEnumerable<IImageFileInfo>> callback) { var task = new PhotoChooserTask { ShowCamera = true }; task.Completed += TaskCompleted; _callback = callback; task.Show(); } void TaskCompleted(object sender, PhotoResult e) { if (e.Error == null && e.ChosenPhoto != null && _callback != null) { var fileName = e.OriginalFileName .Substring(e.OriginalFileName.LastIndexOf("\\") + 1); var info = new FileViewModel(e.ChosenPhoto, fileName); var infos = new List<IImageFileInfo> { info }; _callback(infos); } } In Windows Phone 8 however, when you execute this code, you will be shown an almost empty Photo Chooser UI: Notice that the “Saved Pictures” album is missing. At first I thought it was just not there at all, but you can actually restore it with the following steps: Press on the Windows button On the main screen, press on Photos Press on Albums Open the so called “8” photo album Press Back until you are back into your app and try again. This time you will see the saved pictures, and can perform your tests in more realistic conditions! Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • enabling a user (created with adduser command) for lightdm graphical login

    - by Basile Starynkevitch
    I just installed Ubuntu 12.04 AMD64 on a new (empty) hard disk (because the previous crashed) Since I am quite familiar with Debian, I created two accounts with the adduser command. Since I am also having an NFSv3 file system, I explictly gave user ids when creating them (for simplicity, I keep the same user id on the home server, running Debian; the user names contain digits; I'm not using LDAP), e.g. # grep bethy /etc/passwd bethy46:x:501:501:Bethy XXX,,,06123456:/home/bethy:/bin/bash # grep bethy /etc/group bethy64:x:501: # grep bethy /etc/shadow bethy46:$6$vQ-wmuchmorethings-2o/:15479:0:99999:7:: Of course /home/bethy exists The actual user name is slightly different, and I am not showing the real entries (for obvious privacy reasons) However, these users don't appear at graphical login prompt (lightdm). And they exist in the system, they have entries in /etc/passwd & /etc/shadow and I (partly) restored their /home I've got no specific user config under /etc/lightdm ; file /etc/lightdm/users.conf mentions # NOTE: If you have AccountsService installed on your system, then LightDM # will use this instead and these settings will be ignored but I have no idea of how to deal with AccountsService thru the command line As you probably guessed, I really dislike doing administrative tasks thru a graphical interface; I much prefer the command line What did I do wrong? How can a user entry not appear in lightdm graphical login? (I need to have my wife's user entry apparent for graphical login). I am not asking how to hide a user, but how to show it in lightdm graphical prompt work-around As I have been told in comments by Nirmik and by Enzotib, lightdm probably don't show any users of uid less than 1024. So I changed all the uid to be more than 8200 (including on the Debian NFS server) and this made all the users visible at the graphical prompt. It is a pain that such a threshold is not really documented.

    Read the article

  • Formatting: Group Multiline Alignment - Added

    - by Petr
    One week ago I have added two new properties for formating PHP code into NetBeans 7.1. In Alignment category there are new properties for Group Multiline Alignment - Assignment and Array Initializer.  The Assignment property influence position of the char '=' in a group of lines with assignments.  Let see the pictures below.  On the left site -  Assignment property is off and on the right site the property is on. As you can see, when the property is set on, then the assignment char '=' is placed after the longest identifier in a group. The group is defined as a number of lines that contains the same type of assignments. End of a group can be empty line, line where is only a comment, different expression, end of a block. This formatting options works for variable assignment, field initialization and constants.  The second new property is for Array Initializer.   Both properties are switched off by default. If you will play with it, please file any problem into our Bugzilla.  

    Read the article

  • How do I install Red5 using apt-get? Getting sub-process error

    - by Dalen
    This is copy from question of some guy on other forum that never got satisfiably answered. I encountered the same error few days ago on Ubuntu 13.04 Desktop. It seems like Red5 is installed but it cannot be run for some reason. Can anyone explain what is going on here? Why should dpkg fail? I mean, this is checked repo, it should work fine. apt-get install red5-server Selecting previously deselected package red5-server. (Reading database ... 53491 files and directories currently installed.) Unpacking red5-server (from .../red5-server_0.9.1-4squeeze1_all.deb) ... Setting up red5-server (0.9.1-4squeeze1) ... Starting Flash streaming server : red5-server failed! invoke-rc.d: initscript red5-server, action "start" failed. dpkg: error processing red5-server (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: red5-server E: Sub-process /usr/bin/dpkg returned an error code (1) Logfile error.log in /usr/share/red5/log was completely empty. Other logs were not but according to them, there were no problems at all.

    Read the article

  • How to build Gantt chart from a set of Redmine tickets without filling dates in all of them?

    - by Alexander Gladysh
    Redmine 1.1.1 I've created a set of tickets for a new project. In each issue I filled Subject, Description and Estimated time fields. I also filled blocks/blocked by dependencies in Related issues. But the Gantt chart for this project is empty (that is, it contains all the tasks, but does not contain any "bars" for them). I need to get a Gantt chart (or any other visual representation) to show to other project members. I'd hate to type all that information again into OpenProj. Is there a way to get a serviceable Gantt chart from the Redmine? Update: In the answers below I read that to get working Gantt chart I have to input start date and due date manually for each issue. I believe that this information should be inferred automatically from start date of first ticket (first — depenency-wise), estimated time of each ticket, dependency graph, resource assignment and working hours calendar. Just as it happens in any minimally sane Gantt chart project management tool. To enter this information by hand and to keep it up-to-date manually as the project evolves is insane waste of time. Is there a way to generate Gantt chart from the set of Redmine tickets without filling in all this information manually? (Solutions involving data export + import in sane tool or involving existing plugins are perfectly acceptable.)

    Read the article

  • make my Ubuntu 12.04 laptop visible on the network

    - by Andrew Boyd
    I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

    Read the article

  • When to use http status code 404

    - by Sybiam
    I am working on a project and after arguing with people at work for about more than a hour. I decided to know what people on stack-exchange might say. We're writing an API for a system, there is a query that should return a tree of Organization or a tree of Goals. The tree of Organization is the organization in which the user is present, In other words, this tree should always exists. In the organization, a tree of goal should be always present. (that's where the argument started). In case where the tree doesn't exist, my co-worker decided that it would be right to answer response with status code 200. And then started asking me to fix my code because the application was falling apart when there is no tree. I'll try to spare flames and fury. I suggested to raise a 404 error when there is no tree. It would at least let me know that something is wrong. When using 200, I have to add special check to my response in the success callback to handle errors. I'm expecting to receive an object, but I may actually receive an empty response because nothing is found. It sounds totally fair to mark the response as a 404. And then war started and I got the message that I didn't understand HTTP status code schema. So I'm here and asking what's wrong with 404 in this case? I even got the argument "It found nothing, so it's right to return 200". I believe that it's wrong since the tree should be always present. If we found nothing and we are expecting something, it should be a 404. Extra Also, I believe the best answer to the problem is to create default objects when organizations are created, having no tree shouldn't be a valid case and should be seen as an undefined behavior. There is no way an account can be used without both trees. For that reasons, they should be always present.

    Read the article

  • Help with "advanced" shell scripting | how to create an image preview of a pdf

    - by lucapozzobon
    First of all, sorry for my english: i'm not british/american. Here is my problem. I've got a folder named pdf with lots of files pdf inside it. I've got another folder named thumbnail, which is empty. I want to create jpg images preview of each pdf to use them in my HTML webpages as previews of the pdf. To do this I'm using a software called IMAGEMAGICK. I tried to put the code inside my PHP files to get the purpose, but it doesn't work. As you understood, I have created a small search engine with apache, mysql to search for pdf locally (offline). Now I want to add a "preview" of the first page of pdfs. Instead, it works by bash command line and the code is: convert pdf/name_of_the_file_pdf.pdf[0] name_of_the_imagefile.jpg (The zero stands for that the image is taken from the FIRST page of pdf) How can i make a script that takes each name of pdf files and put it into that code???? To list all the file, I did ls >pdf but with the little knowledge I have I can't go further.... Some pdf's names contain spaces....Is that a problem? PDF files are so many that i can't do the task typing every name,it wouldn't be a nice and clever work!!!! Thanks a lot in advance!!!

    Read the article

  • Does DirectX implement Triple Buffering?

    - by Asik
    As AnandTech put it best in this 2009 article: In render ahead, frames cannot be dropped. This means that when the queue is full, what is displayed can have a lot more lag. Microsoft doesn't implement triple buffering in DirectX, they implement render ahead (from 0 to 8 frames with 3 being the default). The major difference in the technique we've described here is the ability to drop frames when they are outdated. Render ahead forces older frames to be displayed. Queues can help smoothness and stuttering as a few really quick frames followed by a slow frame end up being evened out and spread over more frames. But the price you pay is in lag (the more frames in the queue, the longer it takes to empty the queue and the older the frames are that are displayed). As I understand it, DirectX "Swap Chain" is merely a render ahead queue, i.e. buffers cannot be dropped; the longer the chain, the greater the input latency. At the same time, I find it hard to believe that the most widely used graphics API would not implement such fundamental functionality correctly. Is there a way to get proper triple buffered vertical synchronisation in DirectX?

    Read the article

  • Making an interactive 2D map

    - by Chad
    So recently I have been working on a Legend of Zelda: A Link to the Past clone, and I am wondering how I could handle certain map interactions (like cutting grass, lifting rocks, etc). The way I am currently doing the tilemap is with 2 PNGs. The first is the "tilemap" where each pixel represents a 16x16 tile and the (red, green) values are the (x, y) coords for the tile in the second PNG (the "tileset"). I am then using the blue channel to store collision data. Each tile is split into 4 8x8 tiles and represented by a 2 bit value (0 = empty, 1 = Jumpdown point, 2 = unused right now, 3 = blocking). 4 of these 2 bit values make up the full blue channel (1 byte). So collisions work great, and I am moving on to putting interactive units on the level; but I am not sure what a good way is to do it. I have experimented with spawning an entity for each grass and rock, but there are just WAY to many; FPS just dies even if I confine it to the current "zone" the user is in (for those who remember LTTP it had zones you moved between). It does make a difference that this is a browser-based JavaScript game. tl;dr: What is a good way to have an interactive map without using full blown entities for each interactive item?

    Read the article

  • Could not log-in properly but shows no error in joomla

    - by saeha
    This is what I did, I added variables in \libraries\joomla\database\table\user.php: var $img_content= null; //contains the blob type data var $img_name = null; var $img_type = null; then I added this code in \components\com_user\controller.php: $file = JRequest::getVar( 'pic', '', 'files', 'array' ); if(isset($file['name'])) { jimport('joomla.filesystem.file'); $fileName = $file['name']; $tmpName = $file['tmp_name']; $fileSize = $file['size']; $fileType = $file['type']; $fp = fopen($tmpName, 'r'); $content = fread($fp, filesize($tmpName)); //$content = addslashes($content); fclose($fp); $user->set('img_name', $fileName); $user->set('img_type', $fileType); $user->set('img_content', $content); } that works fine, but I found this problem in logging in with the new user with an uploaded photo, other user with an empty img_content field could login properly. What happens is when I log-in using the user with uploaded photo, it's not redirecting properly it just return to log-in, but when i log-in through backend using other user which is super admin, i could see that user which appears as logged in. I started saving the images in the database because I am having problem with the directory when I have uploaded the site. I think the log-in was affected by the blob type data in the database. Could that be the problem? What could be the solution? -saeha

    Read the article

  • DVDs and CDs not recognized

    - by Larry Doyle
    I have Ubuntu 12.04 LTS installed on my computer (Sony Vaio VGN-NS205N). It reads some CDs and DVDs just fine, but many others it will not recognize at all, or will only recognize after opening and closing the CD tray many times. It just shows the cd/dvd drive as being empty and won't show that anything is on there at all. I have a few DVDs (from the same publisher) that work every time. This comes up most often when trying to show my kid Bob the Builder, etc. Some data CDs I would like to work with also have the same issue. It's not a hardware or defective disc problem, since all these will play in Windows on the same machine. It's just really annoying to have to switch operating systems to play videos or get data off discs. All the searches I have done people recommend installing medibuntu and other repositories. I have and they are all up to date. No change. Any help that works would be greatly appreciated.

    Read the article

  • Maintaining State in Mud Engine

    - by Johnathon Sullinger
    I am currently working on a Mud Engine and have started implementing my state engine. One of the things that has me troubled is maintaining different states at once. For instance, lets say that the user has started a tutorial, which requires specific input. If the user types "help" I want to switch in to a help state, so they can get the help they need, then return them to the original state once exiting the help. my state system uses a State Manager to manage the state per user: public class StateManager { /// <summary> /// Gets the current state. /// </summary> public IState CurrentState { get; private set; } /// <summary> /// Gets the states available for use. /// </summary> /// <value> public List<IState> States { get; private set; } /// <summary> /// Gets the commands available. /// </summary> public List<ICommand> Commands { get; private set; } /// <summary> /// Gets the mob that this manager controls the state of. /// </summary> public IMob Mob { get; private set; } public void Initialize(IMob mob, IState initialState = null) { this.Mob = mob; if (initialState != null) { this.SwitchState(initialState); } } /// <summary> /// Performs the command. /// </summary> /// <param name="message">The message.</param> public void PerformCommand(IMessage message) { if (this.CurrentState != null) { ICommand command = this.CurrentState.GetCommand(message); if (command is NoOpCommand) { // NoOperation commands indicate that the current state is not finished yet. this.CurrentState.Render(this.Mob); } else if (command != null) { command.Execute(this.Mob); } else if (command == null) { new InvalidCommand().Execute(this.Mob); } } } /// <summary> /// Switches the state. /// </summary> /// <param name="state">The state.</param> public void SwitchState(IState state) { if (this.CurrentState != null) { this.CurrentState.Cleanup(); } this.CurrentState = state; if (state != null) { this.CurrentState.Render(this.Mob); } } } Each of the different states that the user can be in, is a Type implementing IState. public interface IState { /// <summary> /// Renders the current state to the players terminal. /// </summary> /// <param name="player">The player to render to</param> void Render(IMob mob); /// <summary> /// Gets the Command that the player entered and preps it for execution. /// </summary> /// <returns></returns> ICommand GetCommand(IMessage command); /// <summary> /// Cleanups this instance during a state change. /// </summary> void Cleanup(); } Example state: public class ConnectState : IState { /// <summary> /// The connected player /// </summary> private IMob connectedPlayer; public void Render(IMob mob) { if (!(mob is IPlayer)) { throw new NullReferenceException("ConnectState can only be used with a player object implementing IPlayer"); } //Store a reference for the GetCommand() method to use. this.connectedPlayer = mob as IPlayer; var server = mob.Game as IServer; var game = mob.Game as IGame; // It is not guaranteed that mob.Game will implement IServer. We are only guaranteed that it will implement IGame. if (server == null) { throw new NullReferenceException("LoginState can only be set to a player object that is part of a server."); } //Output the game information mob.Send(new InformationalMessage(game.Name)); mob.Send(new InformationalMessage(game.Description)); mob.Send(new InformationalMessage(string.Empty)); //blank line //Output the server MOTD information mob.Send(new InformationalMessage(string.Join("\n", server.MessageOfTheDay))); mob.Send(new InformationalMessage(string.Empty)); //blank line mob.StateManager.SwitchState(new LoginState()); } /// <summary> /// Gets the command. /// </summary> /// <param name="message">The message.</param> /// <returns>Returns no operation required.</returns> public Commands.ICommand GetCommand(IMessage message) { return new NoOpCommand(); } /// <summary> /// Cleanups this instance during a state change. /// </summary> public void Cleanup() { // We have nothing to clean up. return; } } With the way that I have my FSM set up at the moment, the user can only ever have one state at a time. I read a few different posts on here about state management but nothing regarding keeping a stack history. I thought about using a Stack collection, and just pushing new states on to the stack then popping them off as the user moves out from one. It seems like it would work, but I'm not sure if it is the best approach to take. I'm looking for recommendations on this. I'm currently swapping state from within the individual states themselves as well which I'm on the fence about if it makes sense to do there or not. The user enters a command, the StateManager passes the command to the current State and lets it determine if it needs it (like passing in a password after entering a user name), if the state doesn't need any further commands, it returns null. If it does need to continue doing work, it returns a No Operation to let the state manager know that the state still requires further input from the user. If null is returned, the state manager will then go find the appropriate state for the command entered by the user. Example state requiring additional input from the user public class LoginState : IState { /// <summary> /// The connected player /// </summary> private IPlayer connectedPlayer; private enum CurrentState { FetchUserName, FetchPassword, InvalidUser, } private CurrentState currentState; /// <summary> /// Renders the current state to the players terminal. /// </summary> /// <param name="mob"></param> /// <exception cref="System.NullReferenceException"> /// ConnectState can only be used with a player object implementing IPlayer /// or /// LoginState can only be set to a player object that is part of a server. /// </exception> public void Render(IMob mob) { if (!(mob is IPlayer)) { throw new NullReferenceException("ConnectState can only be used with a player object implementing IPlayer"); } //Store a reference for the GetCommand() method to use. this.connectedPlayer = mob as IPlayer; var server = mob.Game as IServer; // Register to receive new input from the user. mob.ReceivedMessage += connectedPlayer_ReceivedMessage; if (server == null) { throw new NullReferenceException("LoginState can only be set to a player object that is part of a server."); } this.currentState = CurrentState.FetchUserName; switch (this.currentState) { case CurrentState.FetchUserName: mob.Send(new InputMessage("Please enter your user name")); break; case CurrentState.FetchPassword: mob.Send(new InputMessage("Please enter your password")); break; case CurrentState.InvalidUser: mob.Send(new InformationalMessage("Invalid username/password specified.")); this.currentState = CurrentState.FetchUserName; mob.Send(new InputMessage("Please enter your user name")); break; } } /// <summary> /// Receives the players input. /// </summary> /// <param name="sender">The sender.</param> /// <param name="e">The e.</param> void connectedPlayer_ReceivedMessage(object sender, IMessage e) { // Be good memory citizens and clean ourself up after receiving a message. // Not doing this results in duplicate events being registered and memory leaks. this.connectedPlayer.ReceivedMessage -= connectedPlayer_ReceivedMessage; ICommand command = this.GetCommand(e); } /// <summary> /// Gets the Command that the player entered and preps it for execution. /// </summary> /// <param name="command"></param> /// <returns>Returns the ICommand specified.</returns> public Commands.ICommand GetCommand(IMessage command) { if (this.currentState == CurrentState.FetchUserName) { this.connectedPlayer.Name = command.Message; this.currentState = CurrentState.FetchPassword; } else if (this.currentState == CurrentState.FetchPassword) { // find user } return new NoOpCommand(); } /// <summary> /// Cleanups this instance during a state change. /// </summary> public void Cleanup() { // If we have a player instance, we clean up the registered event. if (this.connectedPlayer != null) { this.connectedPlayer.ReceivedMessage -= this.connectedPlayer_ReceivedMessage; } } Maybe my entire FSM isn't wired up in the best way, but I would appreciate input on what would be the best to maintain a stack of state in a MUD game engine, and if my states should be allowed to receive the input from the user or not to check what command was entered before allowing the state manager to switch states. Thanks in advance.

    Read the article

  • how to troubleshoot sql server issues

    - by joe
    i have an ASP .net application with sql server database, and i am wondering if you can give your ideas on how to troubleshoot the following issue: i can insert / update / delete from any table, but i have one page that uses transactions to insert into different tables. the c# code is correct and very simple, but it fails. i used the sql profiler to see how my app interacts with the DB, especially that the app is using stored procedures, i can catch the exec procedure statement and run it manually from SSMS and it works fine, but the same stored procedure fails from the application!!! which lead me to think that issue is coming from the user account and settings, i am no expert in sql server and wondering if anyone can explain how to verify the required settings for user account. thanks EDIT: in web.config here is how i reference my connection <connectionStrings> <add name="Conn" connectionString="Data Source=localhost;Initial Catalog=myDB;Persist Security Info=True;User ID=DbUser;Password=password1254_3" providerName="System.Data.SqlClient"> </connectionstring> EDIT: i will try to describe the process here: 1- i begin a transaction 2- i call a stored proc to insert (which succeeds) and return the scope identity ( that will be used in the next step) 3- i call another stored procedure to insert some more info + scope identity from step 2, which is a foreign key here 4- i get error, foreign key violation 5- transaction rolled back, now tables empty again... thanks

    Read the article

  • Better ways to have valuable data indexed, which is ignored currently

    - by Sam
    <a title="">.../a> Hi folks. It seems that my title tag which holds extremely valuable and describes contents on my simple design page is currently compeltely denied by search engines and not indexed at all!! Those descriptions should however be indexed as the describe valuable portions to an otherwise empty page with clean glossary (thats neat and organised to the eye of the viewer. So putting all that descriptive data into visible space would ruin the designish less is more fundamental... So, which alternatives to the title tag do I have, in order to put important contents that are relevant for both user as well as search engines? A <a name="">......</> B <p name="">......</> C <a alt="">.......</> D <p alt="">.......</> From the above list, arose my question: Which of the above is advisable alternative in order to get the valuable actual content indexed? Should it be in a a tag or p tag? Or are there even better tags for this which still keep layout clean? You suggestions are Much appreciated!

    Read the article

  • BCM4306, b43 legacy driver installed, but "firmware missing" error

    - by ScrollerBlaster
    I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

    Read the article

  • Allow user to SUDO a script without password.

    - by John Isaacks
    I have a php script with this: <?php #echo exec('whoami'); $output = shell_exec('bash /usr/local/svn/bash_repo/make-live'); echo "$output"; ?> The make-live script contains this: #!/bin/bash cd /var/www-cake sudo svn checkout file:///usr/local/svn/bash_repo/repo/ echo "Head revision has been pushed to live server" So the PHP user who is www-data needs to have nopasswd for that script. I am told I need to add: www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live To sudoers to allow this. First I run sudo visudo but I have no experience with vi so I try to open it in gedit with export EDITOR=gedit && sudo -E visudo which then just opens a sudoers.tmp file which is empty. I add the line and save it. But it doesn't do save. So I just try sudo visudo and I add the line right beneath this part: # User privilege specification root ALL=(ALL) ALL www-data ALL=NOPASSWD: /usr/local/svn/bash_repo/make-live I closed out sudoers and reopened to verify that it has saved. I even restart apache. I run the php file and it still doesn't work. What am I missing?

    Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >