Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 144/778 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Can I connect a switch to a router?

  - by jasondavis

  Ok sorry if this is the most basic question in the world but for years I have needed more ethernet ports in my room and my whole house is wired with 1 ethernet port in each room, I also wanted to be able to plug into the room ethernet port with another router to get more plugins and that wasn't possibe I don't think. So can you plug a switch into this and have more ports with just as much speed?

  Read the article

• Full speed internal switch bandwidth but per-port set external bandwidth?

  - by garg

  I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

  Read the article

• Monitor browser traffic?

  - by FigBug

  What is the easiest (and free) way to monitor all internet traffic sent and received by IE in Windows 7 64-bit?

  Read the article

• MacBook not connecting anywhere via VPN

  - by Toby

  I was wondering if someone could help me troubleshoot this issue. I have a handful of VPNs set up on my MacBook (Snow Leopard) which I know are working, but today when I tried to use them I get the following error in all cases: could not find the PPP kernel extension I have not needed to use any VPN for a while but they have worked in the past and there is nothing I can think of that I have changed on this machine. I have looked in System/Library/Extensions and PPP.kext is there which is the file I thought it would be looking for? Any help would be greatly appreciated.

  Read the article

• Mnemonic external IP

  - by Click Ok

  When diagnosing networking problems, I ping to: My local IP My gateway IP An external IP An external domain name Usually, when troubleshooting, the internet is unaccessible, then I need to remember an external IP address. I need any (easy to remember) IP address. By example, google ip is 72.14.204.147. Cool, but it's hard to remember... What external IP you use? Do you have an mnemonic external IP address, then will be easy to remember?

  Read the article

• Correct way to set up office network - 8 workstations, a file server and a staging server

  - by naunu

  Our office had this old school windows 2003 domain setup, our server caught fire, and now we are looking to do it right from scratch. Here is what we need: 5 PC and 3 Mac workstations for web development, they will each have WAMP/MAMP setup on them, managed by their developers. We will have a file server for assets, and a LAMP server with an external IP for staging. Here is what we have to work with: 5 IP addresses, brand new PC file server with windows 2008 SE, D-Link DSS-16+ 16 port switch, belkin 5 port wireless router, cable modem with 4 ports. How I have it set up now (this is a temporary makeshift setup): Cable modem = LAMP server, wireless router Wireless router = Switch = All of the workstations and file server (setup as a workgroup). We have noticed our internet is very slow with us all plugged in to the switch, and the switch plugged in to the router. I am not positive, but I think it is because our router does not have NAT. We are also having problems with the MACs connection to the network drive - it keeps disconnecting. I want this done right, and we have a ~$600 budget to buy anything else we need. Does anybody have any advice for me? Should I set up a domain or workgroup?

  Read the article

• Offloading Cable Modem operations to Router

  - by Matt

  I may be crazy here, but I seem to recall a conversation in the past stating that it was possible to offload some of the operations taken by one's cable modem to one's router. The logic was that since the cable modem is often equipped with a cheaper processor as it is supplied by your provider, that it often chokes even crashes when you start a torrent or something else with a lot of connections. I seem to recall that some routers offered the ability to take some of the modem's operations. Is this possible or have I imagined the whole thing? I ask because my modem seems to have many issues when I start torrents.

  Read the article

• Routers with decent parental monitoring / traffic logging?

  - by antiver

  I'm looking for consumer router / firmware recommendations with reasonably robust remote URL / hostname logging & reporting functionality. Most logging functionality I've seen is terrible - reporting only IP addresses, not rolling up reports or reporting any useful statistics. The logs are also often limited to merely the last few minutes/hours when handling high-traffic loads. Bonus points for providing a screenshot of the log reporting interface!

  Read the article

• Sharing files from Ubuntu to Mac

  - by seengee

  Hi, Running Ubuntu 10.04 in one office and we want a couple of Mac's in another office to be able to connect to shares on this computer. Want a fairly simple solution to this if one exists. Started looking at setting up a VPN using PPTP but it seems quite complicated. Also seen mention of VNC but this seems more related to sharing desktops and all i want to do is share a directory. Could i just install open SSH and have the Mac users mount a share over SSH using public/private key encryption?

  Read the article

• Content Locking network with Microsoft Web Development tools? [closed]

  - by Jose Garcia

  I want my team to develop a content locking network for a client. But we dont know what is need to devlop such a network. We need to code it from Scratch. Please give us some advice. Content locking networks http://www.blamads.com/ adworkmedia.com These two networks are made with MS Tools it seems. FAQ http://support.blamads.com/index.php?pg=kb.book&id=5 https://www.adworkmedia.com/cpa-network-features.php

  Read the article

• Snow Leopard and NAS share

  - by Andreas

  Hi, I bought a BlackArmor 220 from Seagate. When I start Snow Leopard the NAS shows up with its full name under shares. The problem is that when I click the NAS only a folder BA_Backup shows up, all the other folders, I created, don't. When I click the NAS, it says I'm connected as "guest". I mean I can connect by "Go to server" and additionally add the folders to the user startup objects, so they show up when I start my Mac, but when the NAS already shows up, why can't I configure it? Where can I change this? Thanks! Cheers, Andi

  Read the article

• Is it possible to redirect/bounce TCP traffic to external destination, base on rules?

  - by xfx

  I'm not even sure if this is possible... Also, please forgive my ignorance on the subject. What I'm looking for is for "something" that would allow me to redirect all TCP traffic arriving to host A to host B, but based on some rules. Say host A (the intermediary) receives a request (say a simple HTTP request) from a host with domain X. In that case, it lets it pass through and it's handled by host A itself. Now, let's suppose that host A receives another HTTP request from a host with domain Y, but this time, due to some customizable rules, host A redirects all the traffic to host B, and host B is able to handle it as if came directly from domain Y. And, at this point, both host B and the host with domain Y are able to freely communicate (of course, thought host A). NOTE: All these hosts are on the Internet, not inside a LAN. Please, let me know if the explanation is not clear enough.

  Read the article

• Enabling the log app on the WDTV

  - by Ariel Popovsky

  Just flashed the last WDXLTV firmware on my WDTV and it's working fine. I tried to config a Wifi USB adapter but couldn't get it to work. Dropped the log-saver.app.bin on the root of the stick but didn't find any log files after booting. What I'm doing is turning on the WDTV with the stick inserted (the stick is formatted with FAT32). Tried with the wireless-mod.app.bin required files and without any other file than the log saver. I can't get a log file anyway. All I want right now is to get the log file so I can debug the WI FI adapter.

  Read the article

• Building a Social Networking website, should I have separate servers for certain parts of the site? [closed]

  - by Dylan Cross

  I have been working on building a social networking website, I'm pretty committed to this and I think I have something that could work out. I hope to be launching it January 1st, and so I have a question for server setup and such. Facebook has separate domain names/servers for their photos (and I don't know what else), so I would assume that by doing this it would help spread the server loads out. So I am wondering if it would make a very big difference in speed if I had my main server for basically everything, but had another server and such that the photos would be stored on and access them the same way that facebook does.

  Read the article

• Display wireless channels currently in use

  - by DrStalker

  Is there any windows utility to display the wireless channels are currently in use by the available wireless networks? I'd like to be able to see what existing channels are using so I can try to minimize interference on a new access point without a lot of trial and error.

  Read the article

• ICMP Data Field Modified - What does it Mean?

  - by Lucretius

  Normal ICMP Data fields are composed of a pretty standard 32 byte string of alphabet characters. abcdefghijklmnopqrstuvwabcdefghi I have captured a series of ICMP echo requests using WireShark with a modified Data field and I have no idea what it means. (Underscores represent spaces.) abcdefghijklmnopprstuvwxyzabcdefghi abcdefghijklmnoparstuvwxyzabcdefghi __abcdefghijklmnopsrstuvwxyzabcdefghi __abcdefghijklmnopsrstuvwxyzabcdefghi __abcdefghijklmnopwrstuvwxyzabcdefghi __abcdefghijklmnopdrstuvwxyzabcdefghi__ Note: The position of the "q" character The addition of "xyz" The addition of spaces before and after the payload When you look at the position of "q" horizontally it spells "passwd" which is a Linux/Unix command for changing a users password. Any ideas?

  Read the article

• Can two users both control a third machine simultaneously using Synergy?

  - by Reason

  I've been a Synergy user for some time now, as I use a PC on the left side of my Mac. My girlfriend and I both have our desks on each side of the other, and we'd like to know if it were possible for the both of us to control the PC in the middle, with our own separate mouse & keyboards. Here's a crude drawing of our setup (1) her pc (2) my pc (3) my mac Currently, 3 is running a synergy server, and 2 is running the client. But like I said, I'm wondering if there's a way for 1 & 3 to both control 2 with their own mouse and keyboard. I'd ~love~ to have it set up where we could go even farther, and have both of our mice & keyboards able to control all 3 computers at the same time, for moments when we need to click or press keys for each other. But that seems a little too much to ask! Any thoughts?

  Read the article

• Network Load Balancing, intermittent port problem

  - by Jimmy Chandra

  Trying to troubleshoot an intermittent problem. I think it might be related to an NLB issue. We are using Windows Network Load Balancing to balance load for our multiserver SharePoint front ends. Say... Web Front End 1 IP is 192.168.1.100 and Web Front End 2 IP is 192.168.1.101, the NLB is setup to load balance both WFE servers on any incoming traffic to the IP 192.168.1.200. Sometimes we got an intermittent issue where when we try to access the SharePoint site using 192.168.1.200:8080 (say the site is set up to run on port 8080) from a remote client, it will display page not found. Pinging the 192.168.1.200 will give responses, but when trying to telnet to 192.168.1.200:8080 it just won't connect. However, browsing the SharePoint site directly on individual WFE (192.168.1.100 and 192.168.1.101) show no problem whatsoever. My guess also (we didn't get a chance to try it yet, but I think it should work), if I try connecting remotely to individual server, it will respond just fine. But any attempt on trying to connect using the virtual IP (192.168.1.200) will fail miserably. Funny thing is, after a while it will return back to normal. Anyone had similar experience with this type of problem while implementing NLB before? We are doing this in a virtual environment.

  Read the article

• Nagios NDOUtils config_type field

  - by danilo

  Can someone tell me what the config_type field in the nagios_hosts table of the Nagios NDOUtils Database means? Unfortuntely, it is not included in the database model documentation. http://nagios.sourceforge.net/docs/ndoutils/NDOUtils_DB_Model.pdf

  Read the article

• Nagios NDOUtils config_type field

  - by danilo

  Can someone tell me what the config_type field in the nagios_hosts table of the Nagios NDOUtils Database means? Unfortuntely, it is not included in the database model documentation. http://nagios.sourceforge.net/docs/ndoutils/NDOUtils_DB_Model.pdf

  Read the article

• Cabling: What to keep in stock?

  - by pehrs

  I have worked a few different places, each one with a different solution, so I would like to hear your suggestions and ideas. I am looking at a situation with multiple server-rooms. We have a mixture of copper (both ethernet and telephone), multi-mode fibre and single-mode fibre. We have all types of connectors: RJ-11, RJ-45, LC, SC, FC, SMA and several I probably forgot about. We have a lot of people working in the area, and keeping track of cables is turning into a full time job. So, here are a the questions: What types and lengths of cable do you keep in stock on site? Do you make your own or buy pre-made? Adapters? Dampeners? How do you manage cable inventory? How do you label the cables? Any other tricks to stop this from driving me crazy?

  Read the article

• Macs don't connect to wifi access point but PCs will

  - by Josh

  So, as a side project I'm going to try and figure out why the wifi APs in my building exhibit the following behavior: - They typically allow all types of computers to connect without issues - Sometimes Apples can't get an IP address but will still connect to the AP's signal - Less often, PCs can't connect to the wifi (same as above - yes signal, no IP addy) - Don't let Raiders fans on no matter the time of day! My first thought was that the DHCP leases were all taken up when the Apples would try to connect, and it was just their unlucky timing, but I would then try to log on with a PC that had a new, unleased MAC address and it would work... Could this be something to do with interoperability between an apple wifi card, and the APs? Different parts of the DHCP lease being taken up first? The fact that the Seattle Mariners might actually be good this year?? If this hasn't used up everyone's patience (with my crappy sports jokes), something else I could use some help with: - We don't have the model or type of AP - This is because there is no documentation available for them, and they literally look like small white boxes with no writing on them. Also, the company that installed them is out of business, so the situation might be that no docs will ever be on the way. -- Do you guys have any ideas on how to figure out what we have? Thanks as always for all the help, and I'm looking forward to the day when I know enough to start contributing back to the site, Josh

  Read the article

• Apahe configuration with virtual hosts and SSL on a local network

  - by Petah

  I'm trying to setup my local Apache configuration like so: http://localhost/ should serve ~/ http://development.somedomain.co.nz/ should serve ~/sites/development.somedomain.co.nz/ https://development.assldomain.co.nz/ should serve ~/sites/development.assldomain.co.nz/ I only want to allow connections from our local network (192.168.1.* range) and myself (127.0.0.1). I have setup my hosts file with: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 development.somedomain.co.nz 127.0.0.1 development.assldomain.co.nz 127.0.0.1 development.anunuseddomain.co.nz My Apache configuration looks like: Listen 80 NameVirtualHost *:80 <VirtualHost development.somedomain.co.nz:80> ServerName development.somedomain.co.nz DocumentRoot "~/sites/development.somedomain.co.nz" DirectoryIndex index.php <Directory ~/sites/development.somedomain.co.nz> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost localhost:80> DocumentRoot "~/" ServerName localhost <Directory "~/"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <IfModule mod_ssl.c> Listen *:443 NameVirtualHost *:443 AcceptMutex flock <VirtualHost development.assldomain.co.nz:443> ServerName development.assldomain.co.nz DocumentRoot "~/sites/development.assldomain.co.nz" DirectoryIndex index.php SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /Applications/XAMPP/etc/ssl.crt/server.crt SSLCertificateKeyFile /Applications/XAMPP/etc/ssl.key/server.key BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 <Directory ~/sites/development.assldomain.co.nz> SSLRequireSSL Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> </IfModule> http://development.somedomain.co.nz/ http://localhost/ and https://development.assldomain.co.nz/ work fine. The problem is when I request http://development.anunuseddomain.co.nz/ or http://development.assldomain.co.nz/ it responds with the same as http://development.somedomain.co.nz/ I want it to deny all requests that do not match a virtual host server name and all requests to a https host that are requested with http PS I'm running XAMPP on Mac OS X 10.5.8

  Read the article

• Software Diagnostics Tool recommendations for Debugging a Windows 8 freeze

  - by Stuart

  I've had my HP Pavillion dv6 laptop since last November - and it has had 8GB RAM and a 256GB Crucial M4 SSD installed since the start. I use it for software development and it's had a Windows 8 RTM installation since early September. Yesterday I had to give a presentation at a customer site - so used Powerpoint for the first time since installing Win8... since that point my machine has 'frozen' every 2 hours or so after startup. There doesn't seem to be any easy to see reason behind the freeze - the system just freezes, even if I have left it idle with just a desktop there. My immediate suspicion is that the SSD is the mostly likely cause of the problem. I've looked at some of the questions on here - e.g. How do I troubleshoot hardware issues related to a computer freeze/crash? - but don't really want to start taking my laptop apart. Another suspicion is that this might be related to the WiFi adapter (Broadcom 802.11n) since I have noticed that this doesn't seem to play perfectly with things like Hyper-V in Win8. Can anyone recommend any software diagnostic tools that I can run in order to evaluate the health of the SSD or of other parts of the system? Thanks Stuart P.S. I doubt Powerpoint is the cause of this, but I may use it as an excuse never to use it again... More realistically perhaps something got damaged during travel to the customer site?

  Read the article

• File sharing from a cable connected pc to wifi connected laptop (windows 7 ultimate)

  - by Aiden Jones

  I have a one desktop running windows 7 ultimate connected to Ethernet cable. And I want to share folder to another wifi connected laptop (also windows 7 ultimate). Both machines are on the same home internet connection. I have tried to share folders by going to properties sharing advanced sharing permissions checked all the boxes to allow all but I don’t see any shared files on my laptop. I know it’s possible to share folders between two Wi-Fi connected machines but how can it be done when one pc is cable connected and other is Wi-Fi connected on the same internet connection.

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >