Search Results

Search found 82005 results on 3281 pages for 'cost based data structure'.

Page 1441/3281 | < Previous Page | 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448  | Next Page >

  • ExtJS 4 Chart Axis Display Issue in Chrome

    - by SerEnder
    I've run into an issue while using ExtJS 4.0.7. I'm trying to display a chart with two series on a Numeric/Category Chart. The chart displays correctly in Firefox, but while using Chrome (18.0.1025.142) the x axis labels are either all stacked upon each or else (when using rotate) rendered behind the chart in the specified angle. Any ideas would be appreciated. Screen shot in Firefox: Screen Shot in Chrome: And the code that's used to generate both: Ext.require(['Ext.chart.*']); Ext.onReady(function() { var iChartWidth = 800; // Defines chart width var iChartHeight = 550; // Defines chart height Ext.define('RulesCreatedModel',{ extend:'Ext.data.Model', fields:[ {name:'sHourName', type:'string'}, {name:'User_2', type:'number'}, {name:'User_1', type:'number'}, ] }); var RulesCreatedStore = Ext.create('Ext.data.Store',{ id:'RulesCreatedStore', model:'RulesCreateModel', fields: [ 'sHourName','dayNum','hour','User_2','User_1'], data:[{ 'sHourName':'3pm', 'User_1':82, 'User_2':56 },{ 'sHourName':'4pm', 'User_1':39, 'User_2':44 },{ 'sHourName':'5pm', 'User_1':80, 'User_2':14 },{ 'sHourName':'6pm', 'User_1':55, 'User_2':0, },{ 'sHourName':'7pm', 'User_1':36, 'User_2':0, },{ 'sHourName':'8pm', 'User_1':66, 'User_2':0 },{ 'sHourName':'9pm', 'User_1':39, 'User_2':0, },{ 'sHourName':'10pm', 'User_1':0, 'User_2':0 },{ 'sHourName':'11pm', 'User_1':0, 'User_2':0 },{ 'sHourName':'12am', 'User_1':0, 'User_2':0 },{ 'sHourName':'1am', 'User_1':0, 'User_2':0 },{ 'sHourName':'2am', 'User_1':0, 'User_2':0 },{ 'sHourName':'3am', 'User_1':0, 'User_2':0 },{ 'sHourName':'4am', 'User_1':0, 'User_2':0 },{ 'sHourName':'5am', 'User_1':0, 'User_2':0 },{ 'sHourName':'6am', 'User_1':0, 'User_2':0 },{ 'sHourName':'7am', 'User_1':0, 'User_2':1 },{ 'sHourName':'8am', 'User_1':0, 'User_2':99 },{ 'sHourName':'9am', 'User_1':0, 'User_2':28 },{ 'sHourName':'10am', 'User_1':0, 'User_2':28 },{ 'sHourName':'11am', 'User_1':0, 'User_2':153 },{ 'sHourName':'12pm', 'User_1':0, 'User_2':58 },{ 'sHourName':'1pm', 'User_1':0, 'User_2':42 },{ 'sHourName':'2pm', 'User_1':20, 'User_2':10 }] }); Ext.create('Ext.chart.Chart',{ id: 'RulesWrittenChart', renderTo: 'StatCharts_Display', width: iChartWidth, height: iChartHeight, animate: true, store: RulesCreatedStore, axes: [{ type: 'Numeric', position: 'left', fields: ['User_2','User_1'], title: 'Rules Written', grid: true },{ type: 'Category', position: 'bottom', fields: ['sHourName'], title: 'Hour', grid: false, label: { rotate: { degrees: 315 } } }], series: [{ type: 'line', axis: 'left', xField: 'sHourName', yField: 'User_2', highlight: { size: 3, radius: 3 } },{ type: 'line', axis: 'left', xField: 'sHourName', yField: 'User_1', highlight: { size: 3, radius: 3 } }] }); });

    Read the article

  • UITouch Events and Table Views

    - by Andy
    I'm working on a navigation-based iPhone-only app that serves two main purposes: One, to present data in a hierarchical view, allowing users to drill down and eventually edit said data, and, two, to all users to perform a default action when the table view cell is tapped. I now need to offer a small set of options tied to the same data; however, both the didSelectRowAtIndexPath: and accessoryButtonTappedForRowAtIndexPath: methods are obviously taken. So, my options seem to be to implement a double-tap method, wherein the small list of additional options would be presented after (you guessed it) a double-tap on said table row; or, preferably, a tap-and-hold method. From what I can tell, tap-and-hold seems like the way to go in SDK 4.0 - which does me no good right this red-hot minute. I decided to go with the double-tap option, but I'm having a little trouble. First and foremost, the touchesBegan:withEvent: method does not seem to be getting called at all; a breakpoint placed within the method is never called while the application runs, and the table view responds exactly as it did before I inserted the method (which is to say, it performs the default action): - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *aTouch = [touches anyObject]; if (aTouch.tapCount == 2) { [NSObject cancelPreviousPerformRequestsWithTarget:self]; } } Second, I don't really need to handle a single-tap - the didSelectRowAtIndexPath: method can handle the single-tap just fine. The double-tap is the funky one I want to handle. I suspect the answer is going to contain the phrase, "You can't have the table view handle the single-tap and the touchesBegan: method handle the double-tap. The touch handling methods have to handle all of them." I would really appreciate some guidance from some of you who've dealt with this issue. Thanks in advance.

    Read the article

  • ASP.NET MVC2 and Browser Caching

    - by Dan
    Hi I have a web application that fetches a lot of content via ajax. For example when a user edits some data, the browser will send the changes using an ajax post and then do an ajax get to get fresh content and replace an existing div on the page with that content. This was working just find with MVC1, but in MVC2 I would get inconsistent results. I've found that MVC1 by default included an Expires item in the response headers set to the current time, but in MVC2 the Expires header is missing. This is a problem with some browsers (IE8) actually using the cached version of the ajax get instead of the fresh version. To deal with the problem I created a simple ActionFilterAttribute that sets the reponse cache to NoCache (see below), which works, but it seems kind of sillly to decorate every controller with this attribute. Is there a global way to set this for every controller? Is this a bug in MVC2 and it really should be setting the expires on every ActionResult/view/page? Don't most MVC programs deal with data entry where stale data is a very bad thing? Thanks Dan public class ResponseNoCachingAttribute : ActionFilterAttribute { public override void OnResultExecuted(ResultExecutedContext filterContext) { base.OnResultExecuted(filterContext); filterContext.HttpContext.Response.Cache.SetCacheability(System.Web.HttpCacheability.NoCache); } }

    Read the article

  • my realtime network receiving time differs a lot, anyone can help?

    - by sguox002
    I wrote a program using tcpip sockets to send commands to a device and receive the data from the device. The data size would be around 200kB to 600KB. The computer is directly connected to the device using a 100MB network. I found that the sending packets always arrive at the computer at 100MB/s speed (I have debugging information on the unit and I also verified this using some network monitoring software), but the receiving time differs a lot from 40ms to 250ms, even if the size is the same (I have a receiving buffer about 700K and the receiving window of 8092 bytes and changing the window size does not change anything). The phenomena differs also on different computers, but on the same computer the problem is very stable. For example, receiving 300k bytes on computer a would be 40ms, but it may cost 200ms on another computer. I have disabled firewall, antivirus, all other network protocol except the TCP/IP. Any experts on this can give me some hints?

    Read the article

  • Clustered index - multi-part vs single-part index and effects of inserts/deletes

    - by Anssssss
    This question is about what happens with the reorganizing of data in a clustered index when an insert is done. I assume that it should be more expensive to do inserts on a table which has a clustered index than one that does not because reorganizing the data in a clustered index involves changing the physical layout of the data on the disk. I'm not sure how to phrase my question except through an example I came across at work. Assume there is a table (Junk) and there are two queries that are done on the table, the first query searches by Name and the second query searches by Name and Something. As I'm working on the database I discovered that the table has been created with two indexes, one to support each query, like so: --drop table Junk1 CREATE TABLE Junk1 ( Name char(5), Something char(5), WhoCares int ) CREATE CLUSTERED INDEX IX_Name ON Junk1 ( Name ) CREATE NONCLUSTERED INDEX IX_Name_Something ON Junk1 ( Name, Something ) Now when I looked at the two indexes, it seems that IX_Name is redundant since IX_Name_Something can be used by any query that desires to search by Name. So I would eliminate IX_Name and make IX_Name_Something the clustered index instead: --drop table Junk2 CREATE TABLE Junk2 ( Name char(5), Something char(5), WhoCares int ) CREATE CLUSTERED INDEX IX_Name_Something ON Junk2 ( Name, Something ) Someone suggested that the first indexing scheme should be kept since it would result in more efficient inserts/deletes (assume that there is no need to worry about updates for Name and Something). Would that make sense? I think the second indexing method would be better since it means one less index needs to be maintained. I would appreciate any insight into this specific example or directing me to more info on maintenance of clustered indexes.

    Read the article

  • jQuery .html not writing span on page load, rights the span on ajax response

    - by pedalpete
    I've got a bit of a calendar I'm building with events that go beyond the boundary of one day. I've got a graph which shows how many events are running concurrently. In order to graph out the events which go into another day, I look for hours24, and run an extra bit of code. jQuery('li#hour'+placeGroup+'_'+schedDay2+'_'+thisHour,nextDay).data('count', numStaff).html(''+printHour+''+numEvents+' scheduled').css('height',numEvents*5+'px'); The code is working, the li items are being found, proper height is the css is being applied, data is set, which I've checked by running alert(jQuery('li#hour'+placeGroup+'_'+schedDay2+'_'+thisHour,nextDay).data('count')); right after the pervious bit of code. The only thing that isn't being done is the .html(add span) stuff. I run this code in two places. Once when the page loads, and once when an action is taken which changes the number of events via an ajax response. The li DOM object I'm writting to is created before the script is run, and the height is being applied, but not the span, and only on page load. Any ideas on this one? I'm stumped.

    Read the article

  • PostgreSQL, Foreign Keys, Insert speed & Django

    - by Miles
    A few days ago, I ran into an unexpected performance problem with a pretty standard Django setup. For an upcoming feature, we have to regenerate a table hourly, containing about 100k rows of data, 9M on the disk, 10M indexes according to pgAdmin. The problem is that inserting them by whatever method literally takes ages, up to 3 minutes of 100% disk busy time. That's not something you want on a production site. It doesn't matter if the inserts were in a transaction, issued via plain insert, multi-row insert, COPY FROM or even INSERT INTO t1 SELECT * FROM t2. After noticing this isn't Django's fault, I followed a trial and error route, and hey, the problem disappeared after dropping all foreign keys! Instead of 3 minutes, the INSERT INTO SELECT FROM took less than a second to execute, which isn't too surprising for a table <= 20M on the disk. What is weird is that PostgreSQL manages to slow down inserts by 180x just by using 3 foreign keys. Oh, disk activity was pure writing, as everything is cached in RAM; only writes go to the disks. It looks like PostgreSQL is working very hard to touch every row in the referred tables, as 3MB/sec * 180s is way more data than the 20MB this new table takes on disk. No WAL for the 180s case, I was testing in psql directly, in Django, add ~50% overhead for WAL logging. Tried @commit_on_success, same slowness, I had even implemented multi row insert and COPY FROM with psycopg2. That's another weird thing, how can 10M worth of inserts generate 10x 16M log segments? Table layout: id serial primary, a bunch of int32, 3 foreign keys to small table, 198 rows, 16k on disk large table, 1.2M rows, 59 data + 89 index MB on disk large table, 2.2M rows, 198 + 210MB So, am I doomed to either drop the foreign keys manually or use the table in a very un-Django way by defining saving bla_id x3 and skip using models.ForeignKey? I'd love to hear about some magical antidote / pg setting to fix this.

    Read the article

  • Questions on method to use: Facebook Business Page with Flash or Facebook Application?

    - by Jay
    Hi there, I'm new to Facebook's Graph API / FBML / etc. So if at any point in my post I make a mistake or wrong assumption, please point them out. One of the projects that I am working on has a need to get data/info from an existing web site in addition to the friends list and such that FB can provide. This is for a platform that allows people from all over the world to help out in small scale projects that will benefit various communities. These projects are usually to help out people in unfortunate / less than ideal situations / living conditions so that their environment improves. You can read about it in detail at http://www.getitdone.org. The initial idea was to develop a Business Page (this is the same as a Fan Page right?) for each Project with a Static FBML tag to do the displaying. However, iframes are not allowed in Pages (as far as I know, iframes are only allowed in an FB Application). So it is no longer possible to get data from the web site to be displayed in the FB Page. So one of the options is to embed a Flash in the Page's Tab. I am fairly certain that the Flash can retrieve data on the User's friends and connections in an Application's context (because of all of those darn FB games that I'm addicted to :p). However, I would like to confirm if it can do the same if it's embedded in a Business Page's Tab. Could someone please confirm on this issue? The other option that we arrived at was (if the earlier options fails) to have an Application built instead. However, this means that we would need to create an Application for each Project. Not an ideal situation. Is there any other option that we have missed that can help us achieve the desired result with as little hassle as possible? Any help that you can provide on this matter is most welcome. Thank you.

    Read the article

  • .net layered design: return error code to forms indicating which controls have an error

    - by David Casillas
    Let's say I have a simple application. It tries to add a new entry to a database grabing the info from the user. The information is a tipical MasterDetail objetc like an invoice. The Invoice object used to collect the data has some simple atributes (Id, Date, etc...) and a List of InvoiceDetail, consisting of some simple atributes (invoiceId, productId, quantity, etc...) A form in the UI Layer collects the data from the user, creates an instance of Invoice and sends it to the Bussiness Layer. The Bussines layer sends the data to a Validation Module. If any error in the input is detected it has to return some kind of error code. The Bussiness Layer has to send the error code back to the Form to let the user correct the worng information. I want the application to display some kind of warning (a different background color for example) in every form control with an error. ¿What's a good aproach to I manage the errors to be able to inform the form which controls are wrong? ¿Can I create an error object?¿Use delegates?. I'm using VB.net but don't think this is relevant to the solution of the problem. P.D: Please suggest me some tags to this post.

    Read the article

  • Java Random Slowdowns on Mac OS cont'd

    - by javajustice
    I asked this question a few weeks ago, but I'm still having the problem and I have some new hints. The original question is here: http://stackoverflow.com/questions/1651887/java-random-slowdowns-on-mac-os Basically, I have a java application that splits a job into independent pieces and runs them in separate threads. The threads have no synchronization or shared memory items. The only resources they do share are data files on the hard disk, with each thread having an open file channel. Most of the time it runs very fast, but occasionally it will run very slow for no apparent reason. If I attach a CPU profiler to it, then it will start running quickly again. If I take a CPU snapshot, it says its spending most of its time in "self time" in a function that doesn't do anything except check a few (unshared unsynchronized) booleans. I don't know how this could be accurate because 1, it makes no sense, and 2, attaching the profiler seems to knock the threads out of whatever mode they're in and fix the problem. Also, regardless of whether it runs fast or slow, it always finishes and gives the same output, and it never dips in total cpu usage (in this case ~1500%), implying that the threads aren't getting blocked. I have tried different garbage collectors, different sizings the parts of the memory space, writing data output to non-raid drives, and putting all data output in threads separate the main worker threads. Does anyone have any idea what kind of problem this could be? Could it be the operating system (OS X 10.6.2) ? I have not been able to duplicate it on a windows machine, but I don't have one with a similar hardware configuration.

    Read the article

  • Besides EAR and EJB, what do I get from a J2EE app server that I don't get in a servlet container li

    - by dacracot
    We use Tomcat to host our WAR based applications. We are servlet container compliant J2EE applications with the exception of org.apache.catalina.authenticator.SingleSignOn. We are being asked to move to a commercial J2EE application server. The first downside to changing that I see is the cost. No matter what the charges for the application server, Tomcat is free. Second is the complexity. We don't use either EJB nor EAR features (of course not, we can't), and have not missed them. What then are the benefits I'm not seeing? What are the drawbacks that I haven't mentioned? Mentioned were... JTA - Java Transaction API - We control transaction via database stored procedures. JPA - Java Persistence API - We use JDBC and again stored procedures to persist. JMS - Java Message Service - We use XML over HTTP for messaging. This is good, please more!

    Read the article

  • Trying to write up a C daemon, but don't know enough C to continue

    - by JamesM-SiteGen
    Okay, so I want this daemon to run in the background with little to no interaction. I plan to have it work with Apache, lighttpd, etc to send the session & request information to allow C to generate a website from an object DB, saving will have to be an option so, you can start the daemon with an existing DB but will not save to it unless you login to the admin area and enable, and restart the daemon. Summary of the daemon: Load a database from file. Have a function to restart the daemon. Allow Apache, lighttpd, etc to get necessary data about the request and session. A varible to allow the database to be saved to the file, otherwise it will only be stored in ram. If it is set to save back to the file, then only have neccessary data in ram. Use sql-light for the database file. Build a webpage from some template files. $(myVar) for getting variables. Get templates from a directory. ./templates/01-test/{index.html,template.css,template.js} Live version of the code and more information: http://typewith.me/YbGB1h1g1p Also I am working on a website CMS in php, but I am tring to switch to C as it is faster than php. ( php is quite fast, but the fact that making a few mySQL requests for every webpage is quite unefficent and I'm sure that it can be far better, so an object that we can recall data from in C would have to be faster ) P.S I am using Arch-Linux not MS-Windows, with the package group base-devel for the common developer tools such as make and makepgk. Edit: Oupps, forgot the question ;) Okay, so the question is, how can I turn this basic C daemon into a base to what I am attempting to do here?

    Read the article

  • how to reapply knockout binding

    - by MikeW
    Currently I have a knockout binding that stripes rows in a list which works fine ko.bindingHandlers.stripe = { update: function (element, valueAccessor, allBindingsAccessor) { var value = ko.utils.unwrapObservable(valueAccessor()); //creates the dependency var allBindings = allBindingsAccessor(); var even = allBindings.evenClass; var odd = allBindings.oddClass; //update odd rows $(element).children(":nth-child(odd)").addClass(odd).removeClass(even); //update even rows $(element).children(":nth-child(even)").addClass(even).removeClass(odd); ; } } Triggered from <button data-bind="click: addWidget" style="display:none">Add Item</button> The problem I have is when reloading data from the server , I call addWidget() manually in the view model the stripe binding handler is not applied - all rows appear as same color, if I click the html button then the binding happens and stripes appear var ViewModel = function() { self.addWidget(); }); Is it possible to reapply this custom binding manually in js? Thanks Edit: The stripe binding gets applied like so <div data-bind="foreach: widgets, stripe: widgets, evenClass: 'light', oddClass: 'dark'">

    Read the article

  • When to choose which machine learning classifier?

    - by LM
    Suppose I'm working on some classification problem. (Fraud detection and comment spam are two problems I'm working on right now, but I'm curious about any classification task in general.) How do I know which classifier I should use? (Decision tree, SVM, Bayesian, logistic regression, etc.) In which cases is one of them the "natural" first choice, and what are the principles for choosing that one? Examples of the type of answers I'm looking for (from Manning et al.'s "Introduction to Information Retrieval book": http://nlp.stanford.edu/IR-book/html/htmledition/choosing-what-kind-of-classifier-to-use-1.html): a. If your data is labeled, but you only have a limited amount, you should use a classifier with high bias (for example, Naive Bayes). [I'm guessing this is because a higher-bias classifier will have lower variance, which is good because of the small amount of data.] b. If you have a ton of data, then the classifier doesn't really matter so much, so you should probably just choose a classifier with good scalability. What are other guidelines? Even answers like "if you'll have to explain your model to some upper management person, then maybe you should use a decision tree, since the decision rules are fairly transparent" are good. I care less about implementation/library issues, though. Also, for a somewhat separate question, besides standard Bayesian classifiers, are there 'standard state-of-the-art' methods for comment spam detection (as opposed to email spam)? [Not sure if stackoverflow is the best place to ask this question, since it's more machine learning than actual programming -- if not, any suggestions for where else?]

    Read the article

  • c# sending sms from computer

    - by I__
    i have this code: private SerialPort port = new SerialPort("COM1", 115200, Parity.None, 8, StopBits.One); Console.WriteLine("Incoming Data:"); port.WriteTimeout = 5000; port.ReadTimeout = 5000; // Attach a method to be called when there is data waiting in the port's buffer port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); // Begin communications port.Open(); #region PhoneSMSSetup port.Write("AT+CMGF=1\r\n"); Thread.Sleep(500); port.Write("AT+CNMI=2,2\r\n"); Thread.Sleep(500); port.Write("AT+CSCA=\"+4790002100\"\r\n"); Thread.Sleep(500); #endregion // Enter an application loop which keeps this thread alive Application.Run(); i got it from here: http://www.experts-exchange.com/Programming/Languages/C_Sharp/Q_22832563.html i have a new winforms empty application: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } } } can you please tell me: where exactly would i paste the code? how do i get the code to run? i am sending AT COMMANDS to my cell phone that is attached to the computer

    Read the article

  • Allow paste in worksheet without overwriting locked cells

    - by jjeaton
    I have a protected worksheet that users would like to copy and paste into. I have no control over the workbook they are copying from. The protected worksheet has some rows that are available for data entry, and other rows that are locked and greyed out to the user. The users would like to be able to paste over the top of the entire worksheet from another random workbook and have all the cells available for data entry filled in, while the locked cells are undisturbed. In the current state, the user gets an error when they try to paste, because it cannot paste over the locked cells. Example: Worksheet 1: Act1 100 100 100 Act2 100 100 100 Act3 100 100 100 Worksheet 2: (The second row is locked) Act1 300 300 300 Act2 200 200 200 Act3 100 100 100 After copying/pasting Worksheet 2 should look like this: Act1 100 100 100 Act2 200 200 200 Act3 100 100 100 The values from worksheet 1 are populated and the locked rows are undisturbed. I've been thinking along the lines of having a hook where on paste, the locked cells are unlocked so that the paste can happen, and then are reverted to their original values and relocked. Is there some way I can loop through the cells in the clipboard and only paste cells where the target isn't locked? It is preferable to not create a separate button for paste, so there is less impact on the users, but if that's the only way, I'm not opposed to it. Currently, I plan on grouping the locked rows together, so that the data entry cells are contiguous, but then the accounts will be out of order, which is not preferred.

    Read the article

  • SQLce DAL Linq to Sql or EntityFramework

    - by bretddog
    Hi, I'm learning databases, using SqlCe, and need business object to database mapping. Currently I try to decide if to use Linq to Sql, or EntityFramework. (I understand a bit L2S, but haven't familiarized with EF yet) The program will only be debeloped and used by myself, so I have good control of the priorities: I don't need to consider potential change of database type or data storage type, as I'm quite certain SQLce will stay sufficient. I DO expect continued development and changes to the data scheme while the program is in active use; change business object properties (Hence database columns), and possibly overall table scheme. So old data must be transported to new scheme. I also want to keep a decent degree of layer separation DAL/BLL, although this may not be necessary, it is good for me to learn these principles. My question is: With these priorities, would I have any benefit by choosing either Linq2Sql vs. EntityFramwork? (and please explain why) Btw, the project involves very simple table scheme with only 4-5 tables and very simple relations. Thanks!

    Read the article

  • Phonegap / jquery mobile slide transition not workign properly on first call

    - by Alexander Casassovici
    I have an awkward visual glitch. I want nice transition when changing pages on the app. Unfortunately first time i change to another page, Instead of sliding current pagg out and new page in , current page is immediately replaces by the new page, then slides out... and when it's out of view it's the new page is shown... the second time around it works like a charm though !!! This is running on iphone with jquery mobile + phonegap I made a video to make the issue clear: http://www.youtube.com/watch?v=Ybvzh_wTnSE <body style="background-color: #000;"> <div id="container" style="display:none;"> <div id="side-menu" style="display:none;"> <div id="header_top"></div> <a href="#dives" onclick="showdives();"><div id="header_dives" class="selected"></div></a> <div id="header_spacer1"></div> <a href="#explore" onclick="showexplore();"><div id="header_explore"></div></a> <div id="header_spacer2"></div> <a href="#search" onclick="showsearch();"><div id="header_search"></div></a> <div id="header_spacer3"></div> <a href="#settings" onclick="showsettings();"><div id="header_settings"></div></a> <div id="header_bottom"></div> </div> <div id="slide_mask"> <!-- START of LOGIN page --> <div data-role="page" id="login"> <div id="home_frame"> <div id="home_logo"></div> <div id="home_fblogin" onclick="login()"></div> <div class="home_login"> <p>Email: <input type="text" name="user[email]" size="30"/></p> <p>Password: <input type="password" name="user[password]" size="30"/></p> <button onclick="show_page_home();">LOGIN</button> </div> </div> </div> <!-- END of LOGIN page --> <!-- START of LOGIN page --> <div data-role="page" id="dives" class="right_pane"> <p>My dives !</p> </div><!-- /content --> <div data-role="page" id="explore" class="hidden right_pane"> <p>My explore !</p> </div><!-- /content --> <div data-role="page" id="search" class="hidden right_pane"> <p>My search !</p> </div><!-- /content --> <div data-role="page" id="settings" class="hidden right_pane"> <p>My settings !</p> <button onclick="logout_db();">logout</button> </div><!-- /content --> <!-- END of LOGIN page --> </div> </div> <div id="log"></div> <div id="data"></div> </body> And the relevant CSS: body {margin: 0; font: 18px Helvetica; text-align: center; background-color: #000; background: url(../img/bg_big.png) repeat; -webkit-user-select: none; /* prevent copy paste for all elements */ } #container { width:320px; height:460px; overflow: hidden;} input{ -webkit-user-select: text; /* enable copy paste for elements with this class */} a {-webkit-user-select: none; /* prevent copy paste for all elements */} span {-webkit-user-select: none; /* prevent copy paste for all elements */} #side-menu {z-index: 1000 !important; position: fixed; height: 460px; width: 56.5px; background: url(../img/bg_big.png) no-repeat; display: inline-block; overflow: hidden; top: 0px; left: 0px; } #header_top {background: url(../img/header/header_top.png) no-repeat; background-size: 56.5px 48.96px; width: 56.5px; height: 48.96px; display: block;} #header_dives {background: url(../img/header/dives.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_dives.selected{background: url(../img/header/dives_selected.png) no-repeat;} #header_spacer1{background: url(../img/header/header_space1.png) no-repeat; background-size: 56.5px 13.9px; width: 56.5px; height: 13.9px; display: block;} #header_explore{background: url(../img/header/explore.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_explore.selected{background: url(../img/header/explore_selected.png) no-repeat;} #header_spacer2{background: url(../img/header/header_space2.png) no-repeat; background-size: 56.5px 15.33px; width: 56.5px; height: 15.33px; display: block;} #header_search{background: url(../img/header/search.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_search.selected{background: url(../img/header/search_selected.png) no-repeat;} #header_spacer3{background: url(../img/header/header_space3.png) no-repeat; background-size: 56.5px 17.73px; width: 56.5px; height: 17.73px; display: block;} #header_settings{background: url(../img/header/settings.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_settings.selected{background: url(../img/header/settings_selected.png) no-repeat;} #header_bottom{background: url(../img/header/header_bottom.png) no-repeat; background-size: 56.5px 160px; width: 56.5px; height: 160px; display: block;} .hidden {display: none;} .right_pane{width: 263.5px !important; background: url(../img/right_bg.png) no-repeat; background-size:263.5px 460px; width: 263.5px; height: 460px; left: 56.5px !important;} #slide_mask{ display: inline-block; overflow: hidden; padding-left: 56.5px; width: 263.5px; height: 460px; top: 0;} and the bit of JS: /////////////////////////////////// //MENU MECHANICS /////////////////////////////////// function showdives(){ $("#side-menu .selected").removeClass("selected"); $("#header_dives").addClass("selected"); } function showexplore(){ $("#side-menu .selected").removeClass("selected"); $("#header_explore").addClass("selected"); } function showsearch(){ $("#side-menu .selected").removeClass("selected"); $("#header_search").addClass("selected"); } function showsettings(){ $("#side-menu .selected").removeClass("selected"); $("#header_settings").addClass("selected"); } the onclick only add/remove the "selected" class to the menu items so... any hint ? been trying eveything for hours and still can't get it neat .. :(

    Read the article

  • How to get database table header information into an CSV File.

    - by Rachel
    I am trying to connect to the database and get current state of a table and update that information into csv file, with below mentioned piece of code, am able to get data information into csv file but am not able to get header information from database table into csv file. So my questions is How can I get Database Table Header information into an CSV File ? $config['database'] = 'sakila'; $config['host'] = 'localhost'; $config['username'] = 'root'; $config['password'] = ''; $d = new PDO('mysql:dbname='.$config['database'].';host='.$config['host'], $config['username'], $config['password']); $query = "SELECT * FROM actor"; $stmt = $d->prepare($query); // Execute the statement $stmt->execute(); var_dump($stmt->fetch(PDO::FETCH_ASSOC)); $data = fopen('file.csv', 'w'); while ($row = $stmt->fetch(PDO::FETCH_ASSOC)) { echo "Hi"; // Export every row to a file fputcsv($data, $row); } Header information meaning: Vehicle Build Model car 2009 Toyota jeep 2007 Mahindra So header information for this would be Vehicle Build Model Any guidance would be highly appreciated.

    Read the article

  • Covert uiiamge into string

    - by Warrior
    I am new iphone development.Is there any possibility to covert the uiimage into string and then once again back to image. - (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingImage:(UIImage *)img1 editingInfo:(NSDictionary *)editInfo { [[picker parentViewController] dismissModalViewControllerAnimated:YES]; NSData *data = UIImagePNGRepresentation(img1); NSString *str1; str1 = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; MyAppAppDelegate *appDelegate = (MyAppAppDelegate *) [[UIApplication sharedApplication] delegate]; [appDelegate setCurrentLink:str1]; EmailPictureViewController *email = [[EmailPictureViewController alloc] initWithNibName:@"EmailPictureViewController" bundle:nil]; [self.navigationController pushViewController:email animated:YES]; } so i can use delegate methods to tranfer the image from one view to another view. so i should convert the string once again to image and display it in another view. In Another view - (void)viewDidLoad { MyAppAppDelegate *appDelegate =(MyAppAppDelegate *) [[UIApplication sharedApplication] delegate]; str1 = [appDelegate getCurrentLink]; NSLog(@"The String %@",str1); NSData *aData; aData = [str1 dataUsingEncoding: NSASCIIStringEncoding]; NSLog(@"The String Data %@",aData); NSLog(@"Inside Didload3"); [imgview setImage:[UIImage imageWithData:aData]]; } But this doesn't work for me.Where do i go wrong.Is there any way to solve it?.Please help me out.Thanks.

    Read the article

  • Divide and conquer of large objects for GC performance

    - by Aperion
    At my work we're discussing different approaches to cleaning up a large amount of managed ~50-100MB memory.There are two approaches on the table (read: two senior devs can't agree) and not having the experience the rest of the team is unsure of what approach is more desirable, performance or maintainability. The data being collected is many small items, ~30000 which in turn contains other items, all objects are managed. There is a lot of references between these objects including event handlers but not to outside objects. We'll call this large group of objects and references as a single entity called a blob. Approach #1: Make sure all references to objects in the blob are severed and let the GC handle the blob and all the connections. Approach #2: Implement IDisposable on these objects then call dispose on these objects and set references to Nothing and remove handlers. The theory behind the second approach is since the large longer lived objects take longer to cleanup in the GC. So, by cutting the large objects into smaller bite size morsels the garbage collector will processes them faster, thus a performance gain. So I think the basic question is this: Does breaking apart large groups of interconnected objects optimize data for garbage collection or is better to keep them together and rely on the garbage collection algorithms to processes the data for you? I feel this is a case of pre-optimization, but I do not know enough of the GC to know what does help or hinder it.

    Read the article

  • Changing the indexing on existing table in SQL Server 2000

    - by Raj
    Guys, Here is the scenario: SQL Server 2000 (8.0.2055) Table currently has 478 million rows of data. The Primary Key column is an INT with IDENTITY. There is an Unique Constraint imposed on two other columns with a Non-Clustered Index. This is a vendor application and we are only responsible for maintaining the DB. Now the vendor has recommended doing the following "to improve performance" Drop the PK and Clustered Index Drop the non-clustered index on the two columns with the UNIQUE CONSTRAINT Recreate the PK, with a NON-CLUSTERED index Create a CLUSTERED index on the two columns with the UNIQUE CONSTRAINT I am not convinced that this is the right thing to do. I have a number of concerns. By dropping the PK and indexes, you will be creating a heap with 478 million rows of data. Then creating a CLUSTERED INDEX on two columns would be a really mammoth task. Would creating another table with the same structure and new indexing scheme and then copying the data over, dropping the old table and renaming the new one be a better approach? I am also not sure how the stored procs will react. Will they continue using the cached execution plan, considering that they are not being explicitly recompiled. I am simply not able to understand what kind of "performance improvement" this change will provide. I think that this will actually have the reverse effect. All thoughts welcome. Thanks in advance, Raj

    Read the article

  • prevent escaping special characters on textnode(JS-HTML)

    - by UnLoCo
    Hello i followed this snippet http://bytes.com/topic/javascript/answers/504399-get-all-text-nodes var xPathResult = document.evaluate( './/text()[normalize-space(.) != ""]', document.body, null, XPathResult.ORDERED_NODE_SNAPSHOT_TYPE, null ); for (var i = 0, l = xPathResult.snapshotLength; i < l; i++) { var textNode = xPathResult.snapshotItem(i); textNode.data = textNode.data.replace(/somePattern/g, 'replacement'); } i want to replace certain patterns like for example |12| with a corresponding emoticon ! but when i do textNode.data.replace("|12|",'<.img src="favicon.ico"/>'); for example the text show is ..<.img src="favicon.ico"/>.. as i inspect the html i find that <.img src="favicon.ico"/> became escaped to &lt;img src="favicon.ico"/&gt; is it possible to prevent this and to let the image show ?? Thank You Note: added extra point here &lt;.img src="favicon.ico"/&gt; in purpose

    Read the article

  • Running mysql query using node blocks the whole process and then timesout

    - by lobengula3rd
    I have a node javascript that uses mysql npm (Felix). I have a procedure stored in my DB which I call when the user selects an option to kind of create its own instance of the program. The user chooses for how long he wants that data to be initialized for him. This is suppsoed to be between 1 and 2 years. So if he choose 1 year this query will insert around 20,000 rows into 1 table. If I run this query and a local DB this takes around 30 seconds (I suppose it is reasonable because its a big query which should be done only once in 1 or 2 years so its ok). For some reason my node script freezes as if it can't handle any more calls from other users. The even worse problem is that after like 2 minutes my client ui gets like an error from the server. At this point not all the data that was supposed to enter the DB is entered. After waiting like another minute all the data finally gets to the DB and only then it will accept new requests. This is my connection: this.connection = mysql.createConnection({ host : '********rds.amazonaws.com', user : 'admin', password : '******', database : '*****' }); and this is my query function: this.createCourts = function (req, res, next){ connection.query('CALL filldates("' + req.body['startDate'] + '","' + req.body['endDate'] + '","' + req.body['numOfCourts'] + '","' + req.body['duration'] + '","' + req.body['sundayOpen'] + '","' + req.body['mondayOpen'] + '","' + req.body['tuesdayOpen'] + '","' + req.body['wednesdayOpen'] + '","' + req.body['thursdayOpen'] + '","' + req.body['fridayOpen'] + '","' + req.body['saturdayOpen'] + '","' + req.body['sundayClose'] + '","' + req.body['mondayClose'] + '","' + req.body['tuesdayClose'] + '","' + req.body['wednesdayClose'] + '","' + req.body['thursdayClose'] + '","' + req.body['fridayClose'] + '","' + req.body['saturdayClose'] + '");', function(err){ if (err){ console.log(err); } else return res.send(200); }); }; what am i missing here? as i understand connection.query should by async so why is it actually blocking my node script? thanks.

    Read the article

  • Is my objective possible using WCF (and is it the right way to do things?)

    - by David
    I'm writing some software that modifies a Windows Server's configuration (things like MS-DNS, IIS, parts of the filesystem). My design has a server process that builds an in-memory object graph of the server configuration state and a client which requests this object graph. The server would then serialize the graph, send it to the client (presumably using WCF), the server then makes changes to this graph and sends it back to the server. The server receives the graph and proceeds to make modifications to the server. However I've learned that object-graph serialisation in WCF isn't as simple as I first thought. My objects have a hierarchy and many have parametrised-constructors and immutable properties/fields. There are also numerous collections, arrays, and dictionaries. My understanding of WCF serialisation is that it requires use of either the XmlSerializer or DataContractSerializer, but DCS places restrictions on the design of my object-graph (immutable data seems right-out, it also requires parameter-less constructors). I understand XmlSerializer lets me use my own classes provided they implement ISerializable and have the de-serializer constructor. That is fine by me. I spoke to a friend of mine about this, and he advocates going for a Data Transport Object-only route, where I'd have to maintain a separate DataContract object-graph for the transport of data and re-implement my server objects on the client. Another friend of mine said that because my service only has two operations ("GetServerConfiguration" and "PutServerConfiguration") it might be worthwhile just skipping WCF entirely and implementing my own server that uses Sockets. So my questions are: Has anyone faced a similar problem before and if so, are there better approaches? Is it wise to send an entire object graph to the client for processing? Should I instead break it down so that the client requests a part of the object graph as it needs it and sends only bits that have changed (thus reducing concurrency-related risks?)? If sending the object-graph down is the right way, is WCF the right tool? And if WCF is right, what's the best way to get WCF to serialise my object graph?

    Read the article

< Previous Page | 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448  | Next Page >