Search Results

Search found 49320 results on 1973 pages for 'system architecture'.

Page 1455/1973 | < Previous Page | 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462  | Next Page >

• Problems with nvidia drivers

  - by Crs2489

  I have a problem that I haven't been able to find a solution to. I recently decided to switch from Windows to Ubuntu 11.10, so I originally installed Ubuntu using the wubi installer for windows. After I installed Ubuntu with wubi I installed drivers for nvidia using the additional drivers from system setting and everything worked fine. I then decided that I no longer wanted windows on my computer because i was having problems with it crashing when I went to remove the partition with windows on it using an Ubuntu Live CD I made I found that there were unrepairable problems with both of my partitions so I decided to delete both partitions and install Ubuntu again from the cd now when I try to install nvidia drivers my gui will not load when i start my computer. I have found people who have had similar problems with the gui not loading after installing nvidia drivers but no one who had there gui working after installing with wubi then not working after installing from a cd. I'm using Ubuntu 11.10 32 I have also tried other versions of linux like openSUSE and have had the same problem with the gui not being able to load after installing nvidia drivers.

  Read the article

• Poor performance after reinstalling to a USB drive

  - by anonymous

  I am currently running Ubuntu 11.10 off of a SanDisk 16GB USB. I installed it using a Live USB with the following partition configuration: 6GB Primary /dos FAT32 5GB Logical / ext4 5GB Logical /home ext4 I don't have a hard disk, and don't see myself getting one anytime soon. I rely solely on this 16GB, and two other 4GB USBs, one of which I used as the LiveUSB. I bring the USBs around, and even use the install at work. I previously used an install that used a swap file. It functioned fine for the most part, save for a few slow moments, but I came across this post, and it got me thinking about my USB's life, so I reinstalled with the current config. My problem now is that it is slower. Applications like Firefox would hang more often. In my previous setup (the automatically partitioned setup), Firefox would start hanging if I was running an unzip or install task on the same partition as /. Now however, it would hang if I had another window open i.e. the system settings window. My guess is that it may have something to do with the swap file or the install being on a Logical partition rather than a Primary partition, but I don't know. Any insight as to why it has slowed down?

  Read the article

• I get this error after upgade. please help

  - by user203404

  dpkg: dependency problems prevent configuration of initramfs-tools: initramfs-tools depends on initramfs-tools-bin (<< 0.99ubuntu13.2.1~); however: Version of initramfs-tools-bin on system is 0.103ubuntu0.2. klibc-utils (2.0.1-1ubuntu2) breaks initramfs-tools (<< 0.103) and is installed. Version of initramfs-tools to be configured is 0.99ubuntu13.2. dpkg: error processing initramfs-tools (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of plymouth: plymouth depends on initramfs-tools; however: Package initramfs-tools is not configured yet. dpkg: error processing plymouth (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of mountall: mountall depends on plymouth; however: Package plymouth is not configured yet. dpkg: error processing mountall (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of initscripts: initscripts depends on mountall (>= 2.28); however: Package mountall is not configured yet. dpkg: error processing initscripts (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of upstart: upstart depends on initscripts; however: Package initscripts is not configured yet. upstart depends on mountall; however: Package mountall is not configured yet. dpkg: error processing upstart (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of passwd: passwd depends on upstart-job; however: Package upstart-job is not installed. Package upstart which provides upstart-job is not configured yet. dpkg: error processing passwd (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools plymouth mountall initscripts upstart passwd E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Representing a world in memory

  - by user9993

  I'm attempting to write a chunk based map system for a game, where as the player moves around chunks are loaded/unloaded, so that the program doesn't run out of memory by having the whole map in memory. I have this part mostly working, however I've hit a wall regarding how to represent the contents of each chunk in memory because of my so far limited understanding of OOP languages. The design I have currently has a ChunkManager class that uses a .NET List type to store instances of Chunk classes. The "chunks" consist of "blocks". It's similar to a Minecraft style game. Inside the Chunk classes, I have some information such as the chunk's X/Y coordinate etc, and I also have a three dimensional array of Block objects. (Three dimensional because I need XYZ values) Here's the problem: The Block class has some basic properties, and I had planned on making different types of blocks inherit from this "base" class. So for example, I would have "StoneBlock", "WaterBlock" etc. So because I have blocks of many different types, I don't know how I would create an array with different object types in each cell. This is how I currently have the three dimensional array declared in my Chunk class: private Block[][][] ArrayOfBlocks; But obviously this will only accept Block objects, not any of the other classes that inherit from Block. How would I go about creating this? Or am I doing it completely wrong and there's a better way?

  Read the article

• How to Boot or "enter" into ubnutu 11.04 (Natty Narwhall) on PS3 after installing it?

  - by Xdm

  After failing to install ubuntu 11.04 Desktop version (burned on a dvd, because iso's file size was 726 Mb), in tried the alternate version (about 686 Mb) which i burned into a CD. During the installation process, i manually partitioned the hard drive using ext3. After the installation, the CD ejects itself and i hit "continue". In the k boot prompt i hit "enter" on my the keyboard. I see i welcome message in a dark background (a kind of full screen terminal/console called CLI i think) and was asked to enter my user name and password. After that, instead of booting into the beautiful desktop of Ubuntu, i saw this: ubuntu@my_name$ It was like a line of command i think, where you can use "sudo" commands. It is called a non-graphic mode i think. My my REAL problem is to enter Ubuntu 11.04 with the chocolate-colored background and the African music drum. I tried many commands to boot into the graphic mode of the system such as Ctr+Alt+F7 but nothing happened. In this case, i just saw numbers showing available blocks. I DON'T UNDERSTAND. I also tried startx and sudo startx without result. I DO bought a PS3 BOTH for gaming and for Ubuntu because i can't afford buying a PC. Please help me with my trouble dear Ubuntu 11.04 users. I am counting on you. All the best Xdm

  Read the article

• C++ Database vs Reading Files

  - by Ohmages

  Ive been programing a C++ game/server for the past year. I have been using MYSQL for character logins, items, monsters, etc, etc. (im on windows). My question is, what are some of the databases that some big time developers use. IE. Battle.net, Diablo II, Diablo III, mythos, hellgate , etc, etc, etc. Do they have their own database they built? Or do they use an existing framework for logins, and character transfers. I do know that in diablo II, they use character files to to transfer characters into the game world. But what about the login into battle.net. Would it be wiser for me to stick with MYSQL, or is there something out there faster and more stable, or should I create a login type of system that looks through a file to see if you provided the correct password. Can't wait to get some replies. Thanks! PS. Currently the framework is much like battle.net, where you login into a lobby, create, and join games. The game server/lobby server are different servers too. So im just wondering about the lobby server for logins because I'm expecting several hundred thousand connections/logins.

  Read the article

• SDK mouse relative motion, weird results

  - by zaftcoAgeiha

  I have a simple SDL application that tracks the relative change in mouse position But for some reason, the motion.xrel and motion.yrel give back massive numbers! my code: SDL_WM_GrabInput(SDL_GRAB_ON); SDL_ShowCursor(false); while(!quit){ // Draw the scene if (invalidated == 1){ on_render(); invalidated = 0; } // And poll for events SDL_PumpEvents(); SDL_Event event; while ( SDL_PollEvent(&event) ) { switch (event.type) { case SDL_KEYDOWN: case SDL_KEYUP: on_key(event.key); break; case SDL_MOUSEMOTION: std::cerr << event.motion.xrel << ":" << event.motion.yrel << std::endl; invalidated = 1; break; ... and the printed results are ridiculous: 400:300 -11297:1705 -11215:1268 -10969:940 -10314:-43 -9986:-698 -9331:-1681 -9003:-2227 -8593:-2664 -8020:-3538 -7774:-3647 -7365:-4193 -7283:-4302 -7119:0 any idea why?? System is Ubuntu 12 running in virtual box

  Read the article

• Rotate camera with mouse? [closed]

  - by ezio160324

  Once again, using tutorial 10 at NeHe. I want the code if (keys[VK_RIGHT]) // Is The Right Arrow Being Pressed? { yrot -= 1.5f; // Rotate The Scene To The Left } if (keys[VK_LEFT]) // Is The Left Arrow Being Pressed? { yrot += 1.5f; // Rotate The Scene To The Right } and if (keys[VK_PRIOR]) { lookupdown -= 1.0f; } if (keys[VK_NEXT]) { lookupdown += 1.0f; } to be done with the mouse instead of left/right arrow and Page Up/ Page Down. I tried everything I could think of. Can anyone help? EDIT: I tried using WM_MOUSEMOVE message. I just could not figure it out. EDIT2: I am using pure OpenGL to do this. No window management system or other libs such as GLUT, GLFW, SDL, SFML etc. Just OpenGL. OpenGL and GLEW. EDIT: Issue has been solved.

  Read the article

• Good quality Secure Software Development Training [closed]

  - by Patrick

  Just had my annual appraisal and found out my company is willing to pay for training and exams etc! Woohoo (they kept that one quiet). I'm interested in doing a course on secure development techniques. Has anyone got any suggestions for good quality distance learning courses in secure development (I could probably get a couple of days off to attend a conference/ course if required)? We're mostly an MS .Net house but I have no particular allegiance to MS or any other programming language (though, obviously, C++ is the best language in the world). I have 12 years development experience working in (what are now) PCI:DSS environments, including designing and developing a key management system and I have some knowledge of basic attacks (XSS, injection etc). I would prefer a hard course I struggle with to a basic course I learn 3 things from (but hopefully get something right at my level). A quick google found these two course which look good: http://www.sans.org/course/secure-coding-net-developing-defensible-applications https://www.isc2.org/csslpedu/default.aspx I don't really know how to choose between them, and finding other courses isn't going to make that job any easier, so I thought I'd ask those who know. EDIT : Hmm, care to share the reason for your down vote, will help me learn how to use the site better...

  Read the article

• How would you manage development between many Staging branches?

  - by Trip

  We have a Staging Branch. then we came out with a Beta branch for users to move whenever they wanted to from old Production branch to the new features. Our plan seemed simple, we test on Staging, when items get QA'd, they get cherry-picked and deploy to Beta. Here's the problem! A bug will discreetly make its way on to Beta, and since Beta is a production environment, it needs fixes fast and accurate. But not all the QA's got done. Enter Git hell.. So I find a problem on Beta. No sweat, its already been fixed on Staging, but when I go to cherry-pick the item over, Beta barely has any of the other pre-requisites of code to implement this small change. Now Beta has a little here and a little there, and I can't imagine it as a code base being as stable as Staging. What's more, is I'm dealing with some insane Git conflicts, and having to monkey patch a bunch of things to make up for what Beta hasn't caught up with Staging. Can someone polite or non-polite terms, tell me what we're doing wrong here as far as assembling this project? Any awesome recommendations or workarounds or alternatives to the system we came up with?

  Read the article

• If an entity is composed, is it still a god object?

  - by Telastyn

  I am working on a system to configure hardware. Unfortunately, there is tons of variety in the hardware, which means there's a wide variety of capabilities and configurations depending on what specific hardware the software connects to. To deal with this, we're using a Component Based Entity design where the "hardware" class itself is a very thin container for components that are composed at runtime based on what capabilities/configuration are available. This works great, and the design itself has worked well elsewhere (particularly in games). The problem is that all this software does is configure the hardware. As such, almost all of the code is a component of the hardware instance. While the consumer only ever works against the strongly typed interfaces for the components, it could be argued that the class that represents an instance of the hardware is a God Object. If you want to do anything to/with the hardware, you query an interface and work with it. So, even if the components of an object are modular and decoupled well, is their container a God Object and the downsides associated with the anti-pattern?

  Read the article

• Help! Problem dual boot ubuntu windows8 (can't start ubuntu) [duplicate]

  - by a35

  This question already has an answer here: Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) 5 answers EDIT: I know that there are many topics about dual boot ubuntu windows8, i have read them, my problem is that i cant boot ubuntu neither from HDD nor from live USB. I know about boot repairing, but how can I use it, If i cant boot ubuntu?? I heard about terrible problems with windows 8-linux dual boot, but I really need ubuntu because of school. I read many tutorials how to install ubuntu next to windows8, but despite that a problem accured. Here is what I have done. I have MSI GE60, windows(64bit) is running on mSATA SSD C drive. HDD is divided to two partitions for windows and I left there 50GB for ubuntu. I downloaded ubuntu 12.04.3desktop-amd64(64bit), created bootable USB using Universal USB Installer (recommended on Ubuntu site). I disabled USB legacy support (that Ubuntu could be installed in EFI mode- I was following instructions on Ubuntu site), and also Secure Boot (windows is now angry with me because I turned it off- when I start windows it informs me I should enable that). I inserted USB rebooted computer and chose install ubuntu, divided free 50GB space to swap(2000MB) and rest as ext4 main storage space for ubuntu. Installation passed normally, Ubuntu then asked me to reboot computer. After reboot windows 8 started. Now I can't start ubuntu. When I restart win8 to uefi there is possibility to boot ubuntu, but when I choose it, it crashes. When I choose try ubunfu from connected USB, nothing happend, still dark screed. What is wrong? Can you help me? I am in hurry to do it because of school. Thanks.

  Read the article

• After installing Ubuntu my computer boots into GRUB rescue mode after displaying 'no such partition' error message.

  - by VictorVictor5

  I wanted Ubuntu on my Gateway Solo Laptop. It had Win98 on the C:\ and WinXP on the D:\. Before the install, I could not boot from CD, but I could boot from floppy. I installed Ubuntu to run alongside Windows XP as that was one of the options. It didn't detect Win98, but I swear it's on there. Install seemed fine and then it asked me to reboot. When I rebooted, I got the message error: no such partition and the grub rescue> command prompt. I've looked around, but some commands, like sudo, don't work. One command I did get to work was set root=(hd0,0) if that helps. I'm a noob, and it was a pain installing Win98 and XP since this system is so old. I don't want to wipe my drive and start all over! Additional details copied from comments Addendum, I restored my master boot record via my Win98 boot floppy and typing in frisk /mbr. But, I'd still like to get ubuntu - any help? If I restored my master boot record - did I delete Ubuntu?

  Read the article

• Should I be worrying about limiting the number of textures in my game?

  - by Donutz

  I am working on a GUI in XNA 4.0 at the moment. (Before you point out that there are many GUIs already in existance, this is as much a learning exercise as a practical project). As you may know, controls and dialogs in Windows actually consist of a number of system-level windows. For instance, a dialog box may consist of a window for the whole dialog, a child window for the client area, another window (barely showing) for the frame, and so on. This makes detecting mouse hits and doing clipping relatively easy. I'd like to design my XNA GUI along the same lines, but using overlapping Textures instead of windows obviously. My question (yes, there's actually a question in this drivel) is: am I at risk of adversely affecting game performance and/or running low in resources if I get too nuts with the creating of many small textures? I haven't been able to find much information on how resource-tight the XNA environment actually is. I grew up in the days of 64K ram so I'm used to obsessing about resources and optimization. Anyway, any feedback appreciated.

  Read the article

• Black Screen (but with cursor) after wake-up from suspend to RAM

  - by Naseschwarz

  [Lenovo Thinkpad X60] After upgrading to 12.04, first thing I did was get suspend to HDD back, because I don't use my battery a lot. So I did that. After a while (about a week, I upgraded on release, not beta), maybe a week or so, I started getting black screens from time to time after waking it up from suspend to RAM. I never got that problem with suspend to HDD. As it only happens sometimes, I can't reproduce it o.O Sometimes it doesn't happen for a week (daily use, approx 2-6 wake-ups a day), then every single time. The precise symptoms are as follows: normally I got a black screen with my cursor on it, which can be moved, no problems there. I can't interact with the system in any way except for turning it off on the 1/0 button... the weird thing is, the cursor seems to react to what I had opened when going into suspend to RAM, so for instance one day I had writer open and then my cursor was a "I" for most of the screen. I only get this in 12.04, never had any problems with this in 9.04-11.10. Any ideas? Big thx in advance!

  Read the article

• How do you quantify competency in terms of time (years)?

  - by o.k.w

  While looking for a job via agencies some time ago, I kept having questions from the recuitment agents or in the application forms like: How many years of experience do you have in: Oracle ASP.NET J2EE etc etc etc.... At first I answered faithfully... 5yrs, 7yrs, 2 yrs, none, few months etc etc.. Then I thought; I can be doing something shallow for 7 years and not being competent at it simply because I am just doing a minor support for a legacy system running SQL2000 which requires 10 days of my time for the past 7 years. Eventualy I declined to answers such questions. I wonder why do they ask these questions anymore. Anyone who just graduated with a computer science can claim 3 to 4 years experience in anything they 'touched' in the cirriculum, which to me can be equivalent to zero or 10 years depending how you look at it. It might hold true decades ago where programmers and IT skills are of very different nature. I might be wrong but I really doubt 'time' or 'years' are a good gauge of competency or experience anymore. Any opinion/rebuttal are welcome!

  Read the article

• How to learn to program [on hold]

  - by user94914

  I went to a community college and got a degree in computer science, but I found out I only learn very little about programming. As a result I landed byself a office assistant work (for a year now), I want to study on my own and apply for some internship / very entry level development job. I am wondering how should a person learn to program now? I feel that I might not doing it correctly, I understand everyone has a different approach, but I am really clueless on what to do, as it seems I am 5-10 years away. 1) Read the old college programming textbook cover to cover, learn every single concepts, do all the practice problems and master them (1-2 times until error free). Currently reading this java book 2) Work on any project, keep on googling and reading tutorials (including the books on that specific language). I have been doing 1, but the progress is really slow, about 2-5 pages / hour, over a 1000+ page book, I felt really discouraged. I have a few of them to go through (data struction, analyis algorthim, computer theory, operating system.) I wonder is this the right method to do? I know it is going to take time, but I am hoping to get some advice from current programmers.

  Read the article

• SQL Server 2012 Express LocalDB &ndash; How to get started

  - by krislankford

  As many of you aware, SQL Server can be a bit of a pig when it comes to system resources on your development machine. As part of the 2012 products Microsoft has added SQL Server 2012 Express LocalDB which is a happy medium for myself when thinking about having to install a full blown SQL Server on my box. This however does not work in all cases for all development but if you are doing web or local client development then it should suffice. On the other hand, if you are working with technologies like SharePoint or trying to run Team Foundation Server on your local box then you will be out of luck while using LocalDB. To start of with, the localDB setup is delivered and packaged with Visual Studio 2012 RC. If you want to get the stand-alone installer you can download it here in either the 32 or 64 bit flavors. Once you get it installed you can start using it right away in either Visual Studio 2010 or the new Visual Studio 2012 RC. To get started you can open the SQL Server object explorer in Visual Studio by clicking   the menu option View –> SQL Server Object Explorer. This will bring up to the navigation pane where you can add a SQL Server. Once you add the SQL Server you will be prompted with the “Connect to Server” dialog to enter the server for which you can use “(localdb)\v11.0”. Click connect and you should be connected to your localDB where you can create and manage databases from Visual Studio 2010, Visual Studio 2012 or SSMS. Once you have started creating databases here you can use the database projects in Visual Studio with these database as well as use the (localdb)\v11.0 server name inside your connections string information for your development environment. Hope this helps someone get started with SQL Server 2012 Express LocalDB! It provides a great balance for developing against SQL Server 2012.

  Read the article

• Delete Ubuntu and Grub from PC (and BIOS unaccessible)

  - by Temitope

  I've really done a mess while upgrading 12.04 to 12.10, or my PC did, or ubuntu did, I can't really tell. The situation now is I have a dual booting machine, Windows 7 and ubuntu 12.10 -When turning on the PC, I can't access boot options, I've tried every thing, esc, f1 f8, f10 (I have a Hp pavilion) but all I can see is a short-lasting screen with three lines reading something like "error:files not found" or "link not found". So the PC turns to the Grub loader screen. This is already a BIG problem. It means I can't change boot order, and I'm diperate, since it doensn't seem that repairing my operating systems will bring my BIOS back. -If I chose Ubuntu in grup, it loades but then frezes on the desktop, I may be having problem with unity3d, or compiz, which was reported to be crashing the first times I started ubuntu. Now, after turning off and on the pc several times, no crash is reported again. Ubuntu just load my background image and nothing else. Not the side menu, not the header, nothing. Althogh the system seems "functioning", when I press the power button on the PC, for example, the normal shutdown dialog window appears. -If I chose Windows, Grubs tells me that something is not found, and to press any key to continue; I do it and then Windows loads perfectly. What I now want to do is 1- use EasyBSD to change boot order and boot Windows partition first 2- delete the ubuntu partitions from within windows disk manager What I except happening is that My PC turns to, or near to factory booting settings: I press the power button and Windows loads without asking me nothing I have acess to all my hardisk from withing windows Is that what will really happen? Are there danger I'm not seeing? What I don't except happening is The BIOS access key return functioning How could I eventually solve this? I would like to reinstall Ubuntu, 32 bit version this time.

  Read the article

• a c++ program for task scheduling [closed]

  - by scheduling

  This is the code which I made but I am not able to correct the mistake in the code. Please correct the mistake in my code. #include<unistd.h> #include<stdio.h> #include<stdlib.h> #include<time.h> #include<string.h> int main() { char *timetoken; char currtime[7]; char schedtime[7]; int i; struct tm *localtimeptr; strcpy(schedtime,"15:25:00"); while(6!=9) { time_t lt; sleep(1); lt = time(NULL); localtimeptr = localtime(<); timetoken=strtok(asctime(localtimeptr)," "); for(i=1;i<5;i++) timetoken=strtok('\0'," "); if(i==3) { strcpy(currtime,timetoken); } } printf("The current time is: %s\n",currtime); printf("We are waiting for: %s\n",schedtime); if(!strcmp(currtime,schedtime)) { printf("Time to do stuff \n"); system("C:\PROJECT X"); } getch(); return 0; }

  Read the article

• Customer Highlight: NTT DOCOMO

  - by jeckels

  NTT DOCOMO is the largest mobile operator in Japan, and serves over 13 million smartphone customers. Due to their growing data processing and scalability needs, they turned to Oracle's Cloud Application Foundation products for an integral soultion. At Oracle OpenWorld 2012, we first showcased NTT DOCOMO as a customer who was utilizing Oracle Coherence to process mobile data at a rate of 700,000 events per second (and then using Hadoop for distributed processing of big data). Overall, this Led to a 50% cost reduction due to the ultra-high velocity traffic processing of their customers' events. Recently, on October 7th, 2013, Oracle and NTT DOCOMO were proud to again announce a partnership around another key component of Oracle CAF: WebLogic Server. WebLogic was recently deployed as the application platform of choice to run DOCOMO's mission-critical data system ALADIN, which connects nationwide shops and information centers. ALADIN, which also utilizes Oracle Database and Oracle Tuxedo, is based on Java Platform, Enterprise Edition (Java EE), which has allowed the company to operate smoothly while minimizing additional development and modification associated with the migration of application server products. We look forward to continuing to partner with NTT DOCOMO, and are proud that Oracle Cloud Application Foundation products are providing the mission-critical solutions - at scale - that DOCOMO requires. Want to learn more about how CAF products are working in the real world? Join us for a FREE Virtual Developer Day on November 5th from 9am-1pm Pacific Time!REGISTER NOW

  Read the article

• Installing Ubuntu on HP Envy 4 - 1104tx (preinstalled Windows 8)

  - by Froyo

  I have been using Linux for more than 2 years now. I had hp pavilion dv4 laptop and Ubuntu 12.04 was working great. I recently purchased HP Envy 4 - 1104tx which has Windows 8 preinstalled. I tried to install Ubuntu 12.04 but since it is not much compatible with UFEI, I downloaded 64 bit iso of ubuntu 12.10. Made a liveUSB using UnetBootin 583. I followed Installing Ubuntu on a Pre-Installed UEFI Supported Windows 8 system but still I am not able to boot with LiveUSB. I disabled secure boot. There is no option for fast boot or anything as such. It still wouldn't work. I also tried booting through Legacy, but I'm unable to install via LiveUSB. Is there any other way? I don't have SSD so no problem of fake raid. Is there some way by which I can install Ubuntu (12.04 preferred)? I don't care about Windows 8. Is there any way via which I can install Ubutnu over Windows 8? (I don't have a CD/DVD ROM).

  Read the article

• No root account

  - by user107744

  Okay, here's my problem. I was being an idiot and installed compiz-core on my Xubuntu 12.10. So there I was, trying to figure out how to fix my issue, and I did sudo xfwm4 --replace. Then I was unable to login. So I logging with guest, delete my old account, without deleting the home folder, of course, and I create a new account "michael2". Instead of creating a new home folder for it, I instead instructed the program to use my old home folder. Unfortunately, it completely erased the folder, along with over 150GB worth of downloads and about 200 hours worth of work (I work from home, so, yeah). And to top it all off, whenever I try to use the sudo command, I get the error michael2 is not in the sudoers file. This incident will be reported. I don't know how to fix this, nor can I login to root (I never set the root password, because I never had the need to login as root to do anything). Any help will be appreciated. Is there maybe a way that I can do system restore to restore my previous files and username? I need answers as soon as possible, because I'm literally losing money by the second (the entire work from home kinda thing).

  Read the article

• Should I amortize scripting cost via bytecode analysis or multithreading?

  - by user18983

  I'm working on a game sort of thing where users can write arbitrary code for individual agents, and I'm trying to decide the best way to divide up computation time. The simplest option would be to give each agent a set amount of time and skip their turn if it elapses without an action being decided upon, but I would like people to be able to write their agents decision functions without having to think too much about how long its taking unless they really want to. The two approaches I'm considering are giving each agent a set number of bytecode instructions (taking cost into account) each timestep, and making players deal with the consequences of the game state changing between blocks of computation (as with Battlecode) or giving each agent it's own thread and giving each thread equal time on the processor. I'm about equally knowledgeable on both concurrency and bytecode stuff, which is to say not very, so I'm wondering which approach would be best. I have a clearer idea of how I'd structure things if I used bytecode, but less certainty about how to actually implement the analysis. I'm pretty sure I can work up a concurrency based system without much trouble, but I worry it will be messier with more overhead and will add unnecessary complexity to the project.

  Read the article

• Sprite batching seems slow

  - by Dekowta

  I have implemented a sprite batching system in OpenGL which will batch sprites based on their texture. How ever when I'm rendering ~5000 sprites all using the same texture i'm getting roughly 30fps. The process is as followed create sprite batch which also create a VBO with a set size and also creates the shaders as well call begin and initialise the render mode (at the moment just setting alpha on) call Draw with a sprite. This checks to see if the texture of the sprite has already been loaded and if so it just creates a pointer to the batch item and adds the new sprite coords. If not then it creates a new batch item and adds the sprite coords to that; it adds the batch item to the main batch. if the max sprite count is reached render will be called call end which calls render to render the left over sprites in the batch. and also resets the buffer offset render loops through each item in the batch and will bind the texture of the batch item, map the data to the buffer and then draw the array. the buffer will then be offset by the amount of sprites drawn. I have a feeling that it could be the method i'm using to store the batched sprites or it could be something else that i'm missing but I still can work it out. the cpp and h files are as followed http://pastebin.com/ZAytErGB http://pastebin.com/iCB608tA On top of this i'm also getting a weird issue where then two sprites are batched on after the other the second sprite will use the same coordinates as the last. And then when one if drawn after it is fine. I can't seem to find what is causing this issue. any help would be appreciated iv been sat trying to work this all out for a while now and cant seems to put my finger on what's causing it all.

  Read the article

< Previous Page | 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462  | Next Page >