Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 146/223 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

• lucid lynx runaway process

  - by Jerome

  I am runnning lucid lynx with a gnome desktop. After uninstalling the klipper program there is a new and unwelcome process that begins at startup and takes around 66% of my cpu time. According to "top", the process number is 10 and the name of the process is "events/1". I am unable to kill the process using "top" or "kill". I have no extra startup applications except for gnome-do and tomboy. Eliminating these has no effect. Can anyone help?

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• What do you do with a 15 node decommissioned Itanium cluster?

  - by Gomibushi

  We are decommissioning a 15 node Itanium cluster. We don't know what to do with it. Being geeks we want to put it (or its individual nodes) to some cool use, but since it is Itanium we are a bit unsure what that could/would be. We are not bringing it back as production servers and we are considering giving them away, if anyone wants them. It's not the most spiffy hardware, but being 2U rack servers they pack an ok amount of cpu and memory, they're about 3 years old perhaps. Ideas to what runs well on them? Or something one can use them as?

  Read the article

• transparently set up Windows 7 as remote workstation

  - by Áxel

  Maybe is a very basic question, but I can't find the exact terms to Google for it and find the concrete answer to my doubt. Suppose we have several PCs in which individual employees work. One of them has an extremely powerful CPU, and it's very useful to use that computer to perform heavy computations, but go there and set up your task means its user has to stop working for a while. Is it possible to allow a secondary user account to remotly log in, for example via Remote Desktop, and work with a full user environment, while the main user keeps working under his user session? I've used remote desktop many times in the past, but it always blocked current user session, or even terminated it. Lots of thanks in advance guys.

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• Computer powers off then tries to start up but resets repeatedly.

  - by Sam Holder

  My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

  Read the article

• PSU aka Power Supply won't turn off and No Power_Good - Safe to keep using?

  - by Tek

  The title is the symptoms of my problem. I mainly chose this title for search engines so people can know why this is happening since I see a lot of uncertainty when it comes to this problem. I do have a question related to the source of the problem though. First of all, Inserting the power to the power supply automatically turns on my computer. Using a power supply tester, the tester automatically turns on without me having to push the button to test the PSU. lol. The PG (Power Good) signal is missing. The strange thing is my computer still turns on (OS boots, etc) considering a missing power good signal. Is it really that unsafe to use the power supply when it's missing the power good signal? All the voltages seem to be in check. Here's a picture: Power Supply Tester Readout And by safe (considering the readout) in the sense that is it likely my components (cpu, mobo, etc) could be damaged?

  Read the article

• Openvpn client-to-client connection reencrypted at Server?

  - by user1684411

  currently i'm using a site-2-site openvpn setup. The routers en/decrypt all traffic that goes from one net to another. One of them is the Openvpn server. This works but performance is not as good as possible. I think the limiting factor is the cpu power of the router. Would it be better if i use client-to-client connections and access the fileserver in the one net from a pc in the other, because the openvpn-server does not have to decrypt the (whole) packets?

  Read the article

• Does it make a difference to read from a file instead of from MySQL?

  - by Joe Huang

  My web server currently is quite loaded. And I have a PHP file that is accessed very often remotely. The PHP file basically makes a MySQL query and returns a JSON formatted string. I am thinking to use a Cron job to write the necessary data into a file every 15 mins, so the PHP file doesn't make a MySQL query, instead it reads from the file. Does it make a difference? I mean to alleviate the server loading (CPU/MySQL) a bit?

  Read the article

• large RAID 10 vs small RAID1

  - by user116399

  The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• Windows 7 extremely long startup

  - by Tyler

  Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

• Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

  - by Brandon

  Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• aptana/eclipse blocks other apps

  - by waquner

  Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

  Read the article

• bottle.py on EC2 micro instance causes 2 order of magnitude slowdown

  - by user61633

  Cross-posted from StackOverflow: I wrote a little toy script to solve this type of game, and put it on my new micro EC2 instance. It works perfectly, but while it takes around 0.5 seconds to run a local version, and takes under 0.5 seconds to run both the local and the bottle.py version on my home computer, running the bottle.py version on the EC2 instance takes over 2 minutes. Python has the cpu pegged at 99% the entire time. Only 7.4% memory usage, consistently, and no swapping. The only guess I have is initialization time for bottle.py on EC2, but if it were that, why would it be ~200x faster on my own computer with bottle.py?

  Read the article

• DIagnosing another Windows 7 Lockup

  - by MSEoris

  Im running windows 7 on a fairly modern machine (8gb ram, amd fx-6100, gtx 560ti) and I notice that periodically my windows seems to just hang for a little while. Frequently this occurs after a cold boot and i start up five or six small to medium sized programs, but also occasionally it occurs during normal usage. Basically what occurs is the screen locks up, there is no keyboard responsiveness for a period of 30 seconds to a full minute - after a bit of patience, control is returned, but I'm interested in figuring out what is causing such lockups. I checked the event log and dont see any issues, and all i can see in task manager is a spike in cpu and memory usage right after this occurs. Any tips on how to even begin to diagnose this? Thanks.

  Read the article

• how to protect php app (vbulletin) from hackers

  - by samsmith

  Our vBulletin system is under constant attack, raising cpu load and making the system very slow for legit users. The attack is a script type attack that is attempting to log in and/or create new login ids (mostly it is trying to create login ids in order to spam the site). In vBulletin, we have black listed large ranges of ips, which has helped a lot, but the attacks continue. Is there an automated way to protect the application or web server? ideally, the protection would detect the pages accessed and automatically black list the ip.

  Read the article

• What is Paging in memory management?

  - by Fasih Khatib

  I was just reading Operating System Principles by Silberschatz et al when I came across paging in memory management.I'm slightly confused about it. It states that Physical Memory(I assume it's RAM) is divided into frames, and logical memory is divided into pages. CPU generates logical addresses containing page number and an offset. This page number is used to retrieve the frame number from a page table which gives the base address so the physical address is calculated as base+offset. My question is: is the page table maintained for every process? I logically think that the answer would be yes as every process will need to map its own pages to frames. I may be wrong. Please clarify. Also: paging and segmentation(where 'holes' are created in memory) are two totally different techniques that are not used in combination. Correct?

  Read the article

• Server OS: put it on a separate drive? Yes, no, or depends on the situation?

  - by captainentropy

  Hi, I would like opinions, or facts, both preferably, on whether it's ok to install a server's OS on the RAID array or not. I would predict installation on separate drives is the best but I'm interested in the performance. The server in question will have 8 cores (2.4GHz ea.), 24GB RAM, and ~16TB of usable space of server-class drives in RAID10. There is also a subsytem of an ~equivalent size for backup. I will be running CPU/memory intesive applications on this server in addition to it being file storage for my work (research lab). IF I install the OS (haven't decided which one, probably Ubuntu or Fedora or some other good linux distro) on separate drives will there be any performance problems if they aren't configured in RAID10? IF it is better to have the OS on separate drives should I go for 150GB velociraptors in RAID1 or smallish SSD drives in RAID1? Money is unfortunately a factor as I think I'm close to maxing my budget as it is. Thanks!

  Read the article

• Linux freezes every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >