Search Results

Search found 6887 results on 276 pages for 'internal'.

Page 146/276 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

• cisco vpn and on demand routing

  - by Chris Lively

  We need to connect to a partner via a Cisco VPN from one of our internal servers. This server is already configured for demand dial routing to a different partner, using windows RRAS. The partner provided us the group authentication credentials and the regular logon credentials. Basically, I need to configure it so that when this server needs to access a specific host it will automatically establish the vpn connection and route that specific traffic to them. How can I do this? I've installed the Cisco VPN Client (5.0.07.0440) on the server and I can open it up and connect. However, I'm stuck on how to configure this to automatically happen.

  Read the article

• How can I view a .eml file from command line in Windows Vista?

  - by Nosrettap

  Ok, so my parent's computer crashed (horribly - corruptedRegistry) and I'm trying to access one of their e-mail files that is saved locally on the hard drive. I can't launch Windows itself so right now I am in a "bootup command prompt". I've navigated to where the e-mail appear to be stored C:Users\[userName]\AppData\Local\Microsoft\Windows Mail\Local Folders\Inbox and it shows a list of what appear to be the files. The problem is, they are .eml files and I can't seem to be able to open them. I've tried 'vim' and 'vi' commands but it tells me that 'vim is not recognized as an internal or external command. Does anyone know how I can view .eml files from command line? Thanks

  Read the article

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• Could not use domain name instead of static IP

  - by Nam Gi VU

  Hi, I'm working with some partners in the UK. My office is in Vietnam. We are having a network problem: My partner can access an internal website using the domain name, e.g. http://website.name, but I can only access that website using the direct IP, e.g. 192.168.1.85. I can not ping that web server using "ping website.name" but it works if I using "ping 192.168.1.85". I want to use the domain name. Please help.

  Read the article

• When should .local be used?

  - by hydroparadise

  So, I've set up a few Win Servs in my time and always did the .local thing when there was a router that sepearated my internal from external networks. Now that I'm setting up an *nix box for the first time, does this concept still apply? Do I still want my FQDNs (/etc/hostname) to show .local or .com for all my machines (mixed: linux servers, win workstations) inside of my network. This question comes in context of always having Active Directory hold my hand every step of the way, where now I'm setting up an DNS machine manually.

  Read the article

• Why does try_files append each path together?

  - by Tom

  I'm using try_files like this: http { server { error_log /var/log/nginx debug; listen 127.0.0.1:8080; location / { index off default_type application/octet-stream; try_files /files1$uri /files2/$uri /files3$uri; } } } In the error log, it's showing this: *[error] 15077#0: 45399 rewrite or internal redirection cycle while internally redirecting to "/files1/files2/files3/path/to/my/image.png", client: 127.0.0.1, server: , request: "GET /path/to/my/image.png HTTP/1.1", host: "mydomain.com", referrer: "http://mydomain.com/folder" Can anyone tell me why nginx is looking for /files1/files2/files3/path/to/my/image.png instead of /files1/path/to/my/image.png, /files2/path/to/my/image.png and /files3/path/to/my/image.png? Thanks

  Read the article

• error when using OWA access to mail server exchange 2010

  - by e0594cn

  Suddenly it will come out the below error when accessing the exchange 2010 mail server using OWA after clicking sign in button on initial page? ***The website cannot display the page HTTP 500 Most likely causes: •The website is under maintenance. •The website has a programming error. What you can try: Refresh the page. Go back to the previous page. More information This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying. For more information about HTTP errors, see Help.* Any suggestion? Thanks!

  Read the article

• Repairing a TFS 2005 install or starting anew.

  - by Johan Buret

  Following : Installing Team Foundation Server on a shared database instance We did use a shared database instance setup for TFS 2005, and that was not a good idea, because of the Reporting Service dependency. The reporting instance on the server gives error code 404. What works now Basic source code control. We're able to check in and out source code. What doesn't work : Everything else, including : Opening and creating new team projects. Build automation. Internal bug tracking. Goal setup Having a fully working TFS install, and keeping the history. 1) A full install of TFS 2005 on the same server, but within its own database and reporting instance. 2) Using another server might be an option, but it's really not prefered Downtime should be minimum, my colleagues needs to be able to work on the source Readings I've read the MSDN page about moving/restoring TFS 2005, but I'm still unsure about what to do. Thanks in advance for help

  Read the article

• Power outage, Server 2K3 remains on "applying computer settings"

  - by syuroff

  My reward for clicking the "test" button in the APC UPS software was that it completely cut the power to my SQL server. The server promptly rebooted, the SQL service is running (verified by the app on another server that queries it), but the GUI has remained on "applying computer settings" for 20 minutes and counting, and it forbids RDC connections. Since SQL is up, it is fulfilling its key role, but it's obviously not right. What step to take next? Wait longer? Hardware is a Dell Poweredge 2850, internal RAID10.

  Read the article

• How can I delete everything after the first column in Notepad++?

  - by Bob J

  I'm trying to get rid of everything after a column in Notepad++. Column mode is not an option. Is it possible? What I have 70.97.110.40 159 ms [n/a] 21 70.97.117.177 134 ms [n/a] 21 70.97.120.10 75 ms [n/a] 21 70.97.122.105 87 ms www.portless.net 21 70.97.122.106 89 ms www.popovetsky.org 21 70.97.122.107 95 ms www.psmythe.net 21 70.97.122.104 98 ms wasabi.prostructure.com 21 70.97.122.108 89 ms crm.prostructure.com 21 70.97.122.109 87 ms internal.prostructure.com21 What I want 70.97.110.40 70.97.117.177 70.97.120.10 70.97.122.105 70.97.122.106 70.97.122.107 70.97.122.104 70.97.122.108 70.97.122.109 Thanks

  Read the article

• htaccess rewriterule leading slash

  - by Tiddo

  I'm using htaccess to rewrite my urls so that I can have nice clean urls. However, the same htaccess file does different things on my local server and my remote server: On my local server the url to the website is like http://localhost/example/ and on my remote server the url is http://example.com/. For my local server I can use the following htaccess redirect rule: RewriteRule ^(.*)$ index.php?page=$1 [L,QSA] However, when I use this on my remote server I get an internal server error. Instead I have to use this: (note the leading slash) RewriteRule ^(.*)$ /index.php?page=$1 [L,QSA] Unfortunately this doesn't work on my local server: this rewrite rule requests http://localhost/index.php instead of http://localhost/example/index.php on my local server. How can I make this work on both my remote and local server?

  Read the article

• How is the Trac Project List page customised?

  - by Completenutter2

  We've been using Trac for a while now for our developers only. However we are now opening it up for our (internal) clients. We have a project listing page (based on the default one that comes with Trac). What we'd like to do, is display more information about the project than what is currently available. I have searched google and here, to see if I can find how to get more information. There seems to be a variable called $project which has .name, .description and .href as attributes. Is there somewhere, a list of the attributes available? Or perhaps a different solution altogether that will allow us to display more information on the project list page. Such as the number of open tickets etc.

  Read the article

• External speakers no longer working

  - by Mark Robinson

  We have a Windows Vista laptop. On Monday we hooked it up to external speakers, as we always do, and they worked fine. On Tuesday, we did the same but then the speakers did not work. Weirdly, the laptop internal speaker does work. Nothing was changed between Monday and Tuesday. What happened and, more importantly, how can it be fixed? BTW we tested with other speakers (and cable) and that didn't help. So it seems like a laptop issue.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• How to compile gcc-4.0 on Mountain Lion

  - by Frizlab

  So far I've successfully launched the configure, but when I type make, I get the following error, after some time (there's a lot which compile successfully): ld: unknown/unsupported architecture name for: -arch i686 /usr/bin/libtool: internal link edit command failed make[2]: *** [libgcc_s.dylib] Error 1 make[1]: *** [libgcc.a] Error 2 make: *** [all-gcc] Error 2 Is there a way to tell gcc not to compile itself for the i686 architecture? Here's my uname -a if it can help: Darwin Frizlabs-Computer.local 12.2.0 Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64 x86_64 PS: I know gcc-4.0 is ancient, but I do need it.

  Read the article

• getting Thunderbird rescan imap folder

  - by asdmin

  Since I got an external program (imapfilter) modifying my imap folder, thunderbird keeps loosing track of new messages. Messages are moved upon arrival in sub-folders, making Thunderbird unable keep tracking them - therefore I have no clue which folders to look for new messages, and newly created folders (even I subscribe them after creation) does not show up until I restart the mail client. Is there any extension or setting for Thunderbird which I could use to trigger re-scanning my folder tree? Please don't waste time on advices like restarting Thunderbird: takes a great amount of time, or "use Evolution (or any other mail client)", or use internal mail filters: they are not sophisticated enough or procmail/fetchmail: I'm arranging a remote imap server for good EXTENSION 1: even folders can be created in the background, without Thunderbird would know it has been created.

  Read the article

• Outlook 2010 and Exchange 2003

  - by user69644

  We've had some issues with a user who has upgraded to Outlook 2010 and attached to an internal Exchange 2003 SP2 server. They get errors more or less saying cannot send, contact your administrator and then a long error string whenever attempting to send. They receive just fine - but can't get any outbound flow. We recreate the users profile on another Windows 7 machine with Outlook 2010 and it worked fine. Concerned this might be an issue that rears it's ugly head later or at some random time. We noted some KB docs about the issue recommending registry changes - we've reviewed and ensure these changes were made and still have the issue on the one machine. Any thoughts?

  Read the article

• Security considerations when giving access to SQL Server db for a web application

  - by rem

  I need to expose our SQL Server 2008 database for an access from a asp.net web application. This is a new task for me, so I would like to know what basic security requirements are there for configuring software and hardware components of web server and DB Server. Is it OK to have both Web Server (Windows Server 2008) with IIS holding ASP.NET application and SQL Server 2008 on the same machine? Should I have to install additional firewall, like Forefront TMG? Should it be on separate computer? In case a web application is hosted on an external web hosting privider server and SQL Server DB on a our internal server what are "pro's" and "con's" of such configuration?

  Read the article

• Selectively routing traffic via ethernet or wifi, with proper DNS (Mac OS X 10.6)

  - by Dan

  When I'm at work, I access various intranet pages as well as the wider Internet through ethernet. However, the company LAN blocks some ports (e.g. Google Calendar). I can get to those through WiFi. So, I gave the Airport priority, and then using route add, I set up selective routing: all intranet traffic goes through the ethernet and everything else via WiFi: sudo route add 10.0.0.0/8 <intranet gateway>. However, there are a number of intranet sites that have their own DNS; i.e., hr.company.com only resolves on the intranet. The only way that I can get the DNS to work properly is to add the internal DNS server to the Airport DNS listing, however I fear that when I go elsewhere and forget, this will break things. What's the right way to get the DNS to resolve using this setup?

  Read the article

• Booting from a different partition.

  - by Legolas

  I have a question. I run Windows7 on C:\ drive and it is the only operating system. I want to install Windows8 developer installation (iso image), and I have it saved in a new partition I created, which has only this.G:\ I want to boot from this partition G:\ so that I can install Windows 8, but in my boot options I get only Internal Hard Disk, CD ROM, and USB Drive. I don't have a USB drive. How can I boot from G:\ with that iso image ?

  Read the article

• Looking for an open source real-time network analysis program

  - by JrSysAdmin

  Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

  Read the article

• Outlook Public Calendar

  - by Mike

  Hello, I have a pretty big problem. My son just moved back to work for me in my firm. We set his computer up and installed Outlook03 connected to an Exchange 2000 server. All emails work, (internal/external) but I cannot for the life of me get his outlook to see the public shared calendar. Please let me know if you need any more info. OS is XP SP3, Office03 is SP3. Only other software that's installed are QuickBooks03-09 and Lacerte00-08. Edit: The calendar is in the public folder

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• Apache+FastCGI Timeout Error: "has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds"

  - by Sadjad Fouladi

  I've recently installed mod_fastcgi and Apache 2.2. I have a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke 'mysite.com/test.fcgi' I see "Internal Server Error" after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] What could the problem be? Is it my .htaccess file?

  Read the article

• Asking for brief explanation of reverse proxying and recommended software

  - by 80skeys

  I need to set up a reverse proxy where the backend web server is serving https pages only. I've never set up a reverse proxy and would like a brief overview of how it works. One of my questions is whether the proxy needs to run https also, or does simple http suffice? Second question would be whether to use Apache, varnish, nginx, or squid. This is for an internal site for a small company, so not a lot of traffic expected. Maybe a few dozen users each day.

  Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >