Search Results

Search found 5577 results on 224 pages for 'yash trojan 25'.

Page 146/224 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Certain websites redirect to 127.0.0.1. How do I fix this?

    - by Dian
    Facebook and Youtube in particular. Tried nslookup the address shows as 127.0.0.1. Checked the HOSTS file, it's fine. Ran Malwarebytes' Anti-Malware (didn't find any problems) and SpyBot Search and Destroy (found 1 problem). (Not sure if the Spybot made this improvement) now pinging youtube shows the correct address (74.125.71.91) but the browser still says: Connection to 127.0.0.1 Failed The system returned: (111) Connection refused Tried ipconfig /flushdns but there are no changes. Switched to another user but the results are the same. hosts file: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost ipconfig all: Connection-specific DNS Suffix: DNS Servers: 10.1.1.30 208.67.220.220

    Read the article

  • Ubuntu: Memory Leak

    - by Keener
    I'm having trouble finding from where this memory leak is occurring. I'm running Ubuntu 8.04 LTS on a Dell XPS M1530. I have 3GB of ram and I'm finding after about an hour or so of use top shows me 2GBs+ used. The strange thing is when I add up the memory percentages by PID either from top or ps aux I find that I should only be using about 20-25% of my available ram. What brought this to my attention was I've begun running vmware server again. Now, obviously the ram usage spikes when I load a virtual machine, but the memory VMware is using does not account for the memory usage I'm seeing via top or free. Stopping vmware server releases the memory which was allocated to it, but I'm still unable to find where this RAM is being used. After a complete reboot, of course, the memory is fine, but very quickly it climbs to 60-80% usage with the processes only appearing to account for a third of that. Any ideas where I should look for more information on what this could be?

    Read the article

  • Disaster Recovery Standby Server

    - by user64300
    Hi, I work for a small business with 25 users and 2 servers. 1 server is the DC running Windows Server 2003/Exchange 2003. We want a reliable disaster recovery strategy for this server without having to spend a lot of money. We take regular backups but I have been advised that only an identical server will allow them to be restored easily. I'm trying to come up with a solution that means we don't have to buy two servers at twice the cost everytime we upgrade. I'm toying with the idea of upgrading our DC more frequently (say every 3 years) and then using the old server as the recovery server (temporarily - until we can source a replacement server). However, I won't know whether the backups will restore on the old server until I try it! We're planning to upgrade to Server 2008R2 in the near future so I'm hoping the backup tools will give me some success in restoring to different hardware (or perhaps I can use hyper-v if not). So what I am wondering is whether it is a idea to use old hardware as a disaster recovery strategy (providing we regular test it obviously!).

    Read the article

  • Nginx , Apache , Mysql , Memcache with server 4G ram. How optimize to enought memory?

    - by TomSawyer
    i have 1 dedicated server with Nginx proxy for Apache. Memcache, mysql, 4G Ram. These day, my visitor on my site wasn't increased, but my server get overload always in some specified time. (9AM - 15PM) Ram in use is increased second by second to full. that's moment, my server will get overload. i have to kill all apache , mysql service and reboot it to get free memory. that's the circle. here is my ram in use at the moment 160(nginx) 220(apache) 512(memcache) 924(mysql) here's process number 4(nginx) 14(apache) 5(memcache) 20(mysql) and here's my my.cnf config. someone can help me to optimize it? [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql skip-locking skip-networking skip-name-resolve # enable log-slow-queries log-slow-queries = /var/log/mysql-slow-queries.log long_query_time=3 max_connections=200 wait_timeout=64 connect_timeout = 10 interactive_timeout = 25 thread_stack = 512K max_allowed_packet=16M table_cache=1500 read_buffer_size=4M join_buffer_size=4M sort_buffer_size=4M read_rnd_buffer_size = 4M max_heap_table_size=256M tmp_table_size=256M thread_cache=256 query_cache_type=1 query_cache_limit=4M query_cache_size=16M thread_concurrency=8 myisam_sort_buffer_size=128M # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 [mysqldump] quick max_allowed_packet=16M [mysql] no-auto-rehash [isamchk] key_buffer=256M sort_buffer=256M read_buffer=64M write_buffer=64M [myisamchk] key_buffer=256M sort_buffer=256M read_buffer=64M write_buffer=64M [mysqlhotcopy] interactive-timeout [mysql.server] user=mysql basedir=/var/lib [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid

    Read the article

  • Dovecot starting and running, but not listening on any port

    - by Dženis Macanovic
    Among others things I'm in charge of a Debian GNU/Linux (Wheezy) DomU for the mail services of the company i work for. Yesterday one HDD that was used for this particular server has died. After installing Debian again, Dovecot decided to no longer listen on any ports (checked with netstat -l). Other services (like Postfix and MySQL) work without problems. dovecot -n: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid ext3 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 150 last_valid_uid = 150 mail_gid = mail mail_location = maildir:/var/vmail/%d/%n mail_uid = vmail namespace inbox { inbox = yes location = prefix = } pass db { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = mail mode = 0666 user = vmail } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/private/mail.crt ssl_key = </etc/ssl/private/mail.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_max_userip_connections = 25 } UID 150 is vmail (I double checked file permissions). I didn't install Dovecot from source, but via apt from the official Debian US mirror. There are no messages concerning Dovecot in /var/log/syslog except for: Oct 21 06:36:29 server dovecot: master: Dovecot v2.1.7 starting up (core dumps disabled) Any ideas?

    Read the article

  • MysqlTunner and query_cache_size dilemma

    - by wbad
    On a busy mysql server MySQLTuner 1.2.0 always recommends to add query_cache_size no matter how I increase the value (I tried up to 512MB). On the other hand it warns that : Increasing the query_cache size over 128M may reduce performance Here are the last results: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.25-1~dotdeb.0-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 6G (Tables: 195) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 51 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 1d 19h 17m 8s (254M q [1K qps], 5M conn, TX: 139B, RX: 32B) [--] Reads / Writes: 89% / 11% [--] Total buffers: 24.2G global + 92.2M per thread (1200 max threads) [!!] Maximum possible memory usage: 132.2G (139% of installed RAM) [OK] Slow queries: 0% (2K/254M) [OK] Highest usage of available connections: 32% (391/1200) [OK] Key buffer size / total MyISAM indexes: 128.0M/92.0K [OK] Key buffer hit rate: 100.0% (8B cached / 0 reads) [OK] Query cache efficiency: 79.9% (181M cached / 226M selects) [!!] Query cache prunes per day: 1033203 [OK] Sorts requiring temporary tables: 0% (341 temp sorts / 4M sorts) [OK] Temporary tables created on disk: 14% (760K on disk / 5M total) [OK] Thread cache hit rate: 99% (676 created / 5M connections) [OK] Table cache hit rate: 22% (1K open / 8K opened) [OK] Open file limit used: 0% (49/13K) [OK] Table locks acquired immediately: 99% (64M immediate / 64M locks) [OK] InnoDB data size / buffer pool: 6.1G/19.5G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 192M) [see warning above] The server has 76GB ram and dual E5-2650. The load is usually below 2. I appreciate your hints to interpret the recommendation and optimize the database configs.

    Read the article

  • connecting to a network using route command

    - by ami
    I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

    Read the article

  • PC in POST loop

    - by Antony Scott
    Hi, I have a custom built PC using a Gigabyte GA-EP35-DS3P motherboard with a Q6600 CPU. For the last 2 days it has got itself stuck into a POST loop. Saying that, I don't think it actually got in to the BIOS. It repeatedly lit up the LEDs and then not much more. Sometimes I could see the CPU fan twitch. Today I re-seated the DIMMs and it powered up straight away. Could this be a sign of an impending hardware failure? The PC is hooked up to a UPS, so I don't think it's a power spike or anything like that, as I have 2 other PCs on the same UPS and they're both fine. Yesterday, the first time this happened, I was getting a message which I think said "Scanning BIOS image on hard drive". I've been building and using PCs for well over 25 years and that's a new one on me! I don't think it's an over heating problem, as when the PC does finally boot up the CPU is running at 35-40C. Any help or suggestions would be greatly appreciated.

    Read the article

  • Windows 7 using llt for ipv6

    - by Seoman
    The question asked below is based on the specific implementations of the Os not the RFC. Looking on a way to be able to assign a fixed ip address to a host, before it boots I found that Centos 6 works fine with no modifications and Windows 7 does not work at all. As defined in enter link description here exists 3 valid ways of generate a DUID: 1 Link-layer address plus time 2 Vendor-assigned unique ID based on Enterprise Number 3 Link-layer address Looking at the centos, that works fine, I can see the following autogenerated DUID: option dhcp6.client-id 0:1:0:1:19:60:25:f1:52:54:0:6b:b9:9e; and the MAC address for this host is: ifconfig eth1 | grep HWaddr eth1 Link encap:Ethernet HWaddr 52:54:00:6B:B9:9E As you can see, the DUID containts the MAC address. I can assign a fixed ip address to this host by including an entry on my dhcp server similar to: host vm { hardware ethernet 52:54:00:6B:B9:9E; fixed-address6 2001:db8:0:1::200; if packet(0,1) = 1 { log(debug,"VM Request match!"); } } And the Centos 6 gets his ip. On the windows side, I faced a common problem explained on this other link enter link description here As summary, Win7 uses the option 2 of the DUID generation or a variation of this one. On the link explains how to move it to a llt (link layer + time) but is not working fine. If I modify the DUID to one that looks like the one generated on Centos (but with the right MAC) it works as expected. Question 1 How Can I change the DUID generation for Windows 7 to be based on MAC as Centos 6 does? Thanks

    Read the article

  • erratic response times with Apache 2.0.52 on redhat 4.

    - by Kevin
    Under load, we've noticed response times from Apache vary greatly for the same 7k image. It can range anywhere from .01 seconds to 25 seconds or greater. Unfortunately, due to corporate policy constraints we are pretty much stuck on Apache 2.0.52. I'm at best an Apache novice so I'm in over my head with this problem. My focus recently has turned to our choice of MPM modules. We use the worker model on a dual core hyper threaded blade. It doesn't appear that swapping is an issue, and I don't see any signs of a hardware problem. I've read that worker is optimal on hardware with many CPU's where prefork it more suitable for our specific hardware profile. I can see conceptually how choosing the wrong MPM could result in this erratic behavior, but I'm not confident that it's the root cause here. Has anyone else seen this type of range in your response times for simple static content? What else should I be looking into here?

    Read the article

  • php-cgi.exe Taking out server, multiple running

    - by Alex
    I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

    Read the article

  • InstallShield or Windows installer corrupted

    - by Bobby S
    Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

    Read the article

  • Ram configuration 4x4 or 2x8?

    - by Carl B
    I am looking to upgrade my Ram to 16gigs and I am wondering if there is any distinct advantage of the way I do it. That being a 4x4 or 2x8 set up. In all my searching there have been a number of pros for each profile. I can find no benchmarck results for either setup as a compaison. So, if there are 2 profiles of the same speed, same voltage, same timing and same cas what would perform better or have a better over all benafit? A few examples from my search - a 4x4 set would lend a benafit in that if one stick failed, you only lose 25% of your Ram vs 50% in a 2x8 set up. a 2x8 set up would have less strain on the memory controler and motherboard. a 2x8 would generate less heat. a 2x8 set up is easier to over clock (not part of my need, but alot of the comparisons circled around the overclocability ease of the 2 stick set up). There is one outstanding benafit that I have found in at least the target company I have looked at and that is price. The 2x8 is nearly half the cost. My motherboard supports a max of 16 gigs and I have a 64 bit OS. Has anyone seen any performance comparisons or is 16 gb just 16 gb no matter how you slice it? And is there any merit to the above pros? Edit: as per the mobo specs - Main Memory • Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max

    Read the article

  • Enabling http access on port 80 for centos 6.3 from console

    - by Hugo
    Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

    Read the article

  • How do I make a PPT file as small as possible?

    - by grunwald2.0
    Currently I am agonizing over several large presentation files, which I happened to reprint to PDFs... One thing I wondered: Do PPT's (from Microsoft Powerpoint) always to have to be that big? And what would be the strategies to make a PPT smaller? (If we say "ceterus paribus" at e.g. 25 slides and assuming that one isn't allowed to use a cloud-based service like GDocs, rocketslide or Prezio.) Of course there are the obvious "bad guys": Images and graphics. But: How about roll-over animations etc, who knows how much space they take? How about "smart arts"? Could one save file size if one would use "Open Office" or "Libre Office" Impress? (I didn't try it yet.) And "what if": What if we need to include e.g. five images (or charts that can't be remade in Excel in time), how would we best reduce the file size impact of those five images, if we needed to? I ask all this from an honest "business" perspective. I am no nerd or "Microsoft MVP" and I don't intend on delving into LATeX or similar yet. But that doesn't mean that I am not curious and very willing to learn. I am basically interested in (proven) best practices. Yes I know this question is lacking "initial research", but I think the perspective of my question is interesting and unique to a lot of people and if we intend to make SE a "Q&A" / Wiki kind-of reference site, this question might be a good way to "collect" advice on a question that has a very defined goal: Minimum file-size.

    Read the article

  • Copied a file with winscp; only winscp can see it

    - by nilbus
    I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

    Read the article

  • memory usage setting

    - by user127610
    everybody,the memory usage is too much,what can i do? top - 12:54:37 up 7 days, 4:38, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 18 total, 2 running, 16 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048800k total, 917424k used, 131376k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2840 1364 1204 S 0.0 0.1 0:02.17 init 1161 root 14 -4 2320 600 420 S 0.0 0.1 0:00.00 udevd 1391 root 18 0 35512 1288 948 S 0.0 0.1 0:03.53 rsyslogd 1409 root 15 0 8432 1164 700 S 0.0 0.1 0:03.87 sshd 1416 root 18 0 3156 868 692 S 0.0 0.1 0:00.00 xinetd 1423 root 18 0 8672 716 292 S 0.0 0.1 0:00.00 saslauthd 1424 root 18 0 8672 488 64 S 0.0 0.0 0:00.00 saslauthd 1431 root 15 0 7020 1168 616 S 0.0 0.1 0:00.99 crond 1450 root 25 0 6236 1444 1228 S 0.0 0.1 0:00.05 sh 3328 mysql 15 0 799m 42m 4892 S 0.0 4.1 0:02.07 mysqld 15479 root 15 0 11304 3332 2688 R 0.0 0.3 0:00.06 sshd 15482 root 15 0 6372 1688 1404 S 0.0 0.2 0:00.00 bash 15497 root 15 0 2536 1044 864 R 0.0 0.1 0:00.00 top 20137 www 15 0 20672 14m 864 S 0.0 1.4 0:00.87 nginx 22351 www 16 0 52324 26m 9244 S 0.0 2.6 0:13.94 php-fpm 24231 www 16 0 51928 25m 9260 S 0.0 2.5 0:13.52 php-fpm 32682 root 15 0 35832 3228 864 S 0.0 0.3 0:02.18 php-fpm 32686 root 18 0 7368 1616 888 S 0.0 0.2 0:00.00 nginx

    Read the article

  • Host is missing hostname and/or domain

    - by anlawang
    i use puppet 0.25.4 on ubuntu 10.04,when puppet installed ,i got the infor below : Nov 29 10:30:30 puppet puppetmasterd[4422]: Host is missing hostname and/or domain: pclient.example.com Nov 29 10:30:30 puppet puppetmasterd[4422]: Compiled catalog for pclient.example.com in 0.02 seconds i dont know how to fix it ,who can help me thank you ! my configuration : I use apt-get to install the puppet,so some configuration have been fixed puppet.conf on client : > [main] server=puppet.example.com > logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=false > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post > certname=pclient.example.com > node_name=cert [puppetd] > runinterval=30 puppet.conf on server: > [main] logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=true > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post i user the default node on site.pp i am a newer to puppet,so i dont know the reason for these problems!! thank you again!!!

    Read the article

  • Calculating memory footprints using /proc/sysvipc/shm

    - by MarkTeehan
    This is for a SLES 10 database server. One of my servers runs three databases and three app servers; I am analyzing how their shared memory segments grow and shrink to avoid intermittent out-of-memory scenarios. "Top" is hot helpful for this since its calculations for RES and VIRT are inconsistent. I am doing this by matching up the contents of /proc/sysvipc/shm with memory usage reported by the database admin console. I do this by totaling up saving the contents of /proc/sysvipc/shm and then total up "bytes" for all of the segments for the offending userid. This is a large server with hundreds of segments and tens (or hundreds) of GB of allocated memory per userid. However it doesn't match up - the database management software claims to be using around 25% more memory than the total I calculate. Negligible swap space is in use, so I am ignoring that. I am running it as root so I am sure I see all shared memory segments. My question is : is all (significant) allocated memory recorded in /proc/sysvipc/shm, or is this only shared memory (*and not "un-shared" memory?). If this is incorrect, what is the correct way to calculate out the total allocated memory for each userid? Also: I believe doing a 'cat' on this file locks server IPC. I check it every 5 seconds - is it likely that this frequency could be problematic? Thanks! Mark Teehan Singapore

    Read the article

  • XFS: No space left on device

    - by beketa
    I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

    Read the article

  • Outbound ports to allow through firewall - core requirements

    - by dunxd
    This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support email and web access, which I know everyone will need: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working? I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

    Read the article

  • Suggestion regarding pointing domains to a dedicated server.

    - by Bizz
    I recently got a dedicated server and I am still at a learning stage. So please bear with me. I wanted to have 3 domains pointed to my server, but initially I asked them the process to point me one and they responded with: Hello, I can set that rDNS for you. Please make sure the domain is pointed to our name servers at godaddy. They are: ns1.xxxxx.net ns2.xxxxx.net After this is done, please allow up to 24 hours for global propagation. Alternatively, we can host your DNS for you if you prefer. What is the domain you would like xx.xxx.xx.xx to resolve to? I then asked him to point one of my domains. They responded, Did you want us to host your dns for that domain or just an rDNS record? They also said, Hosting your DNS is a free service here. We can only do 1 domain per IP. IF you would like to purchase additional IPs, they are $1/IP per month. I personally dont want to host DNS myself. Neither mail server. I have a single IP so far. It will then start to get expensive if I want to host 25 from these guys. I am still in the trial period. Does this seem reasonable as far as pricing goes? If I want to have some one host DNS and mail server, this is getting super expensive. Email hosting from rackspace starts at $2 per mail address, but from then on, its the same if you want added features such as archiving etc; What would you suggest I do if I am on a shoe string budget but I also want to avoid hassle of doing it myself and I only have 3 domains so far and I would need few mail addresses for each of them.

    Read the article

  • Windows 7: resizing the 'Save As' window

    - by Mark Miller
    I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

    Read the article

  • troubleshooting postifx -> exchange connection issues

    - by Systemspoet
    I have three linux-based mail routers that run postfix and relay mail to our on-premise exchange server as well as to outlook.com, splitting the mail based on ldap atttributes. What I've observed sporadically since upgrading this spring from Exchange 2007 to 2010 is that all three of the mail relays will, for about 20 minutes, fail to connect to exchange. Postfix logs it as "lost connection with exchange.contosso.edu" ; this problem almost always occurs to all three mail relays at the same time, and lasts for slightly under 20 minutes. If I can catch it while it's occuring, and I manually do "telnet exchange.contosso.edu 25" from one mail relay and force a message through (helo, mail from, rcpt to, data, etc), then it clears that relay up. The exchange "server" is actually two machines with the HT role on them, load balanced via windows NLB. I've worked pretty hard to figure out what's happening from the postfix side and I can't see any evidence of any misbehavior. My question is, how do I attack the problem from the exchange side? Is there a connection log, or a debug setting, or something I can do to log all of the inbound connections and tell me what's causing exchange to drop them?

    Read the article

  • Issues with returned mail sent to web-based email domains

    - by Beeder
    My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >