Search Results

Search found 4811 results on 193 pages for 'plus'.

Page 147/193 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• Offloading backups to secondary network

  - by user1467163

  I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

  Read the article

• Windows 7 using llt for ipv6

  - by Seoman

  The question asked below is based on the specific implementations of the Os not the RFC. Looking on a way to be able to assign a fixed ip address to a host, before it boots I found that Centos 6 works fine with no modifications and Windows 7 does not work at all. As defined in enter link description here exists 3 valid ways of generate a DUID: 1 Link-layer address plus time 2 Vendor-assigned unique ID based on Enterprise Number 3 Link-layer address Looking at the centos, that works fine, I can see the following autogenerated DUID: option dhcp6.client-id 0:1:0:1:19:60:25:f1:52:54:0:6b:b9:9e; and the MAC address for this host is: ifconfig eth1 | grep HWaddr eth1 Link encap:Ethernet HWaddr 52:54:00:6B:B9:9E As you can see, the DUID containts the MAC address. I can assign a fixed ip address to this host by including an entry on my dhcp server similar to: host vm { hardware ethernet 52:54:00:6B:B9:9E; fixed-address6 2001:db8:0:1::200; if packet(0,1) = 1 { log(debug,"VM Request match!"); } } And the Centos 6 gets his ip. On the windows side, I faced a common problem explained on this other link enter link description here As summary, Win7 uses the option 2 of the DUID generation or a variation of this one. On the link explains how to move it to a llt (link layer + time) but is not working fine. If I modify the DUID to one that looks like the one generated on Centos (but with the right MAC) it works as expected. Question 1 How Can I change the DUID generation for Windows 7 to be based on MAC as Centos 6 does? Thanks

  Read the article

• Connect USB hard drive to wireless router on RJ45 port? Possible?

  - by lawphotog

  just a quick story behind. I was trying to set up wireless networked hard drive at home. My wireless router doesn't take USB. I am considering few options. First i was considering to get something like WD My Cloud. My router is an old one provided by service provider. It only has 10/100 Ethernet. WD My Cloud has Gigabit interface. So unless i changed a new router, data transfer will be slow. So upgrading the router is a must if i want fast transfer speed. Plus I already own an external hard drive with USB 3.0 interface. So if I get a router like Netgear D6300, i can get a decent speed wireless shared drive at home. And i can use my existing HDD instead of WD My Cloud. But the router isn't cheap so I am saving up for that. In the meantime I found out the existence of USB to RJ45 adaptor. I read the reviews and some say it works for them and for some don't. They didn't really say what they were trying to do so I'm confused. So if i bought an adaptor like this, can i connect my existing HDD (USB) with my existing router (RJ45) and use it as a shared drive for data transfer? I know it will be slow as the adaptor will only have USB 2.0 and 10/100 for Ethernet. But it's fine as it's for temporary until i got my new router.

  Read the article

• Should I use nginx exclusively, or have it as a proxy to Tomcat (performance related)?

  - by Kevin

  I've planned to create a website that'll be pretty heavy on dynamic content, and want to know what would be the wisest choice for part of my webstack. Right now I'm trying to decide whether I should develop upon nginx, using PHP to deliver the dynamic content, or use nginx as a proxy to Tomcat and use servlets to deliver the dynamic content. I have a good amount of experience with Java, JSP, and servlets, so that's a plus right off the bat. Also, since it is a compiled language, it will execute faster than PHP (it is implied here that Java is around 37x faster than PHP) , and will create the web pages faster. I have no experience with PHP, however i'm under the impression that it is easy to pick up. It's slower than Java, but since the client will only be communicating with nginx, I'm thinking that serving the dynamically created web pages to the client will be faster this way. Considering these things, i'd like to know: Are my assumptions correct? Where does the bottleneck occur: creating pages or serving them back to the client? Will proxying Tomcat with nginx give me any of nginx performance benefits if I'm going to be using Tomcat to generate the dynamic content (keeping in mind my site is going to be heavy in this aspect)? I don't mind learning PHP if, in the end, its going to give me the best performance. I just want to know what would be the best choice from that standpoint.

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• Is it a good Idea to switch to a SSD to use less battery?

  - by Walter Maier-Murdnelch

  I am thinking of buying a SSD for my laptop, mainly for the purpose of extended operating time when running on battery. At the moment I use a Hitachi HTS545032B9A300 (320GB) (Datasheet) as main drive and a Seagate Momentus 5400.3 120GB as secondary drive. I dualboot Windows and Linux but I don't need the windows partition any longer, a 120GB SDD would be more than sufficient space-wise. Speed is not an issue for me, I make heavy use of tmpfs (ramdrive) within Linux and transfers of bigger files are mainly through some network filesystem anyways, thus a cheaper SSD should do. For the purpose of comparison I chose the OCZ Vertex Plus 120GB. Power consumption always is a big promotional thing the industry uses to make me want to buy their SSDs, some sheet on the OCZ page provides an astonishing comparison of desktop HDDS and SSDs. The numbers I got comparing my laptop HDD and their SSD were not really astonishing any longer. Hitachi 320GB HDD: Startup (W, peak, max.) 4.5 Seek (W, avg.) 1.7 Read / Write (W, avg.) 1.4 Performance idle (W, avg.) 1.3 Active idle (W, avg.) 0.8 Low power idle (W, avg.) 0.5 Standby (W, avg.) 0.2 Sleep 0.1 OCZ 120GB SSD: 1.5W active 0.3W standby I see that there are differences, but actually they don't seem that high as I though they were. And compared to the power consuption of the rest of my system I wonder if it makes a difference at all. Have I just taken the wrong look at the whole thing or may I be better off to buy another battery for my laptop?

  Read the article

• How to eliminate the domain suffix off my user profile folder when migrating to a new domain?

  - by Jerry Dodge

  We have just upgraded a decade old SBS 2003 server to a brand new SBS 2011 machine. During the process, over 30 other client/server machines on that domain also needed to be dis-joined and re-joined from the old domain to the new one. These domains have different names and is not migrated in any way. It's built from scratch. Since each client machine had very unique user profiles under this domain, we needed to make sure these were all backed up and migrated over to the new domain. For the most part, profiles were migrated with no hassle, just by renaming the user profile folder names. However, in one case, when I log in to my domain account, it creates a profile folder with a suffix of the new domain name. I have replaced all the files in the profile's root which begin with "ntuser" with the files of the new profile. The only problem is half the applications can't find their data, because the folder name is different. How can I change this folder name and maintain this profile on the new domain? I have deleted every user account (except admin), deleted their profiles/folders, removed them from the registry, and made sure every trace of this account was gone. The computer was basically a dummy with only an admin account. Then, I log into the machine under my new domain user account (same username as the old domain). It creates a profile folder with my username plus a suffix extension of the new domain name. The client machine is Windows 7 Ultimate, the old server was SBS 2003, and the new server is SBS 2011.

  Read the article

• MongoDB and GrifFS. What are the best storage options in the range of 1 TB?

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities?

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Suggestions for Backup solution

  - by jiewmeng

  i am considering between windows home server simple nas extra HDD's in desktop btw, i will be the main user i am looking to fulfil the following needs: reliability (i am think RAID 1 or 5) not so prone to virus/malware infections (will using a separate NAS or home server help? say windows home server is still a windows pc except separated by network?) power efficiency (eg. spin down when not in use) download (eg. i may want to dl big files/torrents overnight and i may not want to use a full powered PC for it? does a full pc vs NAS provide significant power usage to justify cost of new system esp. since i am only user?) performance (i guess i like to write/access my files fast, on 2nd thought, maybe for backup i can forgo this? maybe for a WD Green HDD? but how much slower will it be? plus since i am the only user, i think the whole HDD will be mine?)

  Read the article

• Server side url scanner for malware, spyware , viruses and protect my visitors

  - by Vangel

  I have a forum/groups site that contains a lot of external URLs, sometimes direct download links. I want to protect my visitors from possible attacks from malware sites as they are mot likely to click on these links. CUrrently I implement DBL (spamhaus) but thats not enough. I want to run a background task to check the outgoing links first. I have looked at similar questions in StackOverflow (wrongly posted there) and here but fail to find a question same as mine or a good answer. People have suggested ClamAV , I don't believe it can detect Web hosted malware sites and its has a lot of missed detection. I have looked at google safe browsing service ( http://code.google.com/apis/safebrowsing/developers_guide_v2.html very complicated to implement or maintain plus midway I get lost :S ) I can go for commercial solution, anything to protect the visitors and my site brand. But I would like to hear the opinion of server admins and if anyone has implemented such a service. My Server is basic CentOS LAMP stack. thank you very much in advance.

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• Command or tool to display list of connections to a Windows file share

  - by BizTalkMama

  Is there a Windows command or tool that can tell me what users or computers are connected to a Windows fileshare? Here's why I'm looking for this: I've run into issues in the past where our deployment team has deployed BizTalk applications to one of our environments using the wrong bindings, leaving us with two receive locations pointing to the same file share (i.e. both dev and test servers point to dev receive location uri). When this occurs, the two environments in question tend to take turns processing the files received (meaning if I am attempting to debug something in one environment and the other environment has picked the file up, it looks as if my test file has disappeared into thin air). We have several different environments, plus individual developer machines, and I'd rather not have to check each individually to find the culprit. I'm looking for a quick way to detect what locations are connected to the share once I notice my test files vanishing. If I can determine the connections that are invalid, I can go directly to the person responsible for that environment and avoid the time it takes to randomly ask around. Or if the connections appear to be correct, I can go directly to troubleshooting where in the process the message gets lost. Any suggestions?

  Read the article

• Whats the best cloud backup solution for a small scale server environment?

  - by nbv4

  I have a server that runs a postgres database that contains about 200MB of data. Currently I have a cron job setup on my home computer which: ssh's into my server runs a remote script which makes a backup of the database scp's that dump over to my local hard drive for storage. Each dump is 20MiB. does this every six hours (one months of backups is roughly 2GiB) The problem with this setup is that if my local machine goes down for whatever reason, no backups will be made. Also, I can't have the cron run from the server, because I can't have it scp'd to my local machine from my server (firewalls and all that crap). My local machine is running Ubuntu 10.04, and my server is Ubuntu 9.10 server edition. I looked into Ubuntu One, but currently it's gui-only. I also looked into dropbox, but it's a pain in the ass to get setup in linux without gui support. Amazon S3 looks good but it's not free (yet dirt cheap). Is there any other alternative that I should look into? I'd prefer something where I can just have my script dump the database into a directory, and have the backup service 'watch' that folder and sync accordingly. I can maybe also have my local machine sync to the cloud backup so I have even more redundancy, plus easy access to my backups for use in testing. Edit: My server is a VPS, so what solution I end up using has to be 100% software based.

  Read the article

• NAS for Mac OS X Server

  - by SamAdmin

  I'm using Mac OS X Server and want to allow the users that connect to their network accounts to store their data on a NAS drive. I want the users to connect to the Lion server as this allows for better policies and management for me and for their afp share to be located on a NAS drive. I've looked into home directories and network logins however I don't want the users to connect into a different login environment, just an authentication against their provided account on the Lion server and for their finder to take them to their own storage area - located on the NAS drive. Currently I am using FreeNAS for both authentication and storage however there are getting to be far too many people to manage each afp share and account, plus just using FreeNAS is extremely limiting for expansion and if something goes wrong with 1 entity the entire system goes down. Using the Lion server for user accounts and policies will be much better for this expanding business. I have looked into LDAP, using the Lion server as an LDAP server to authenticate against for FreeNAS however I have had issues with this and thought a different approach could be better from the other side of the situation... Providing the account with somewhere to store data rather than the afp share authenticating against an LDAP server. I am wrong to try it this way? Is it possible to logically add storage to a Mac OS X Server which can be recognised as a local drive, so can be used for network accounts?

  Read the article

• Are ZFS snapshots + S3 a viable backup system for several VMs and general fileserver storage?

  - by AllanA

  I've been tasked with setting up a backup system for my small office (around 12 people). Most of our production stuff is on the AWS cloud, so what I need to back up are some small office/development files (under 100G right now), plus our operational VMs and development, which round out to a bit under 1T. I just need something reliable, convenient, and straightforward. I'm comfortable with Linux, FreeBSD, and to some extent Solaris 10, so I'm leaning toward a full server rather than an appliance system ala Openfiler or FreeNAS. What I'm contemplating is a small fileserver for general storage and nightly backups of the virtual machines, followed up by an offsite backup to Amazon's S3 storage service. It'd be the usual incremental backups nightly and full backup weekly. My question is if using ZFS snapshots, both locally and dumped to S3 via 'zfs send [-i]', is a viable backup tool? Or should I stick to using Duplicity, or some other method entirely? ZFS snapshots on the internal fileserver/backup machine sound like a perfect way to provide quick and convenient data recovery, so I'm likely to go with that for local redundancy. (If you folks see scenarios where relying on ZFS snapshots would be worse than a more traditional archiving backup, feel free to convince me.) But are snapshots flexible enough to lean on for recovery from the loss of my backup server? Or am I better off with something more traditional? (feel free to recommend free or commercial backup solutions you favor.)

  Read the article

• Why is piping dd through gzip so much faster than a direct copy?

  - by Foo Bar

  I wanted to backup a path from a computer in my network to another computer in the same network over a 100MBit/s line. For this I did dd if=/local/path of=/remote/path/in/local/network/backup.img which gave me a very low network transfer speed of something about 50 to 100 kB/s, which would have taken forever. So I stopped it and decided to try gzipping it on the fly to make it much smaller so that the amount to transfer is less. So I did dd if=/local/folder | gzip > /remote/path/in/local/network/backup.img.gz But now I get something like 1 MB/s network transfer speed, so a factor of 10 to 20 faster. After noticing this, I tested this on several paths and files and it was always the same. Why does piping dd through gzip also increase the transfer rates by a large factor instead of only reducing the bytelength of the stream by a large factor? I'd expected even a small decrease in transfer rates instead, due to the higher CPU consumption while compressing, but now I get a double plus. Not that I'm not happy, but just wondering. ;)

  Read the article

• Command line switching

  - by Larry

  I have read through some suggestions but I am just not technical enough to get this I think. I am a CAD designer and each file has 5 files associated with it. I have 3 sets of 5 files, and each set needs to go into its own zip file, placed on a separate server. For example: "C:\Program Files\7-zip\7z.exe" a file1.zip "O:\server2\map files\BC\BC.d*"-0 "C:\Program Files\7-zip\7z.exe" a file2.zip "O:\server2\map files\BC\ON.d*"-0 "C:\Program Files\7-zip\7z.exe" a file3.zip "O:\server2\map files\BC\AB.d*"-0 and I am in directory "S:\server\map files\provinces" (for example). These lines run within an existing batch file and by the time it reaches the 3 lines above, it's in the S: directory sample above. So it's looking on my pc for the 7-zip program, creating 3 zip file names which it does, but places those zip files on a separate server which it doesn't and the first zip file also includes all the other 10 files, the second zip file the same plus the first zip file, and the third the same with the other two zip files making me think the code isn't recognizing the part after file1.zip where I am trying to tell it what files to include and where to place the zip files. Ultimately, I want to either have the system create a new zip file if the old one was deleted, or copy the new files into the existing zip and overwrite any older files, and for these zip files to be placed in a separate location which is where we share our files with other personnel from within our company. The S: drive is for all originals, and O: is for sharing. Is there a list of all switching options with many different samples?

  Read the article

• Recommended drive encryption solution

  - by Chris Driver

  Hello, I will soon be purchasing a number of laptops running Windows 7 for our mobile staff. Due to the nature of our business I will need drive encryption. Windows BitLocker seems the obvious choice, but it looks like I need to purchase either Windows 7 Enterprise or Ultimate editions to get it. Can anyone offer suggestions on the best course of action: a) Use BitLocker, bite the bullet and pay to upgrade to Enterprise/Ultimate b) Pay for another 3rd party drive encryption product that is cheaper (suggestions appreciated) c) Use a free drive encryption product such as TrueCrypt Ideally I am also interested in 'real world' experience from people who are using drive encryption software and any pitfalls to look out for. Many thanks in advance... UPDATE Decided to go with TrueCrypt for the following reasons: a) The product has a good track record b) I am not managing a large quantity of laptops so integration with Active Directory, Management consoles etc is not a huge benefit c) Although eks did make a good point about Evil Maid (EM) attacks, our data is not that desirable to consider it a major factor d) The cost (free) is a big plus but not the primary motivator The next problem I face is imaging (Acronis/Ghost/..) encrypted drives will not work unless I perform sector-by-sector imaging. That means an 80Gb encrypted partition creates an 80Gb image file :(

  Read the article

• Looking for a software / something to automate some simple audio processing

  - by Daniel Magliola

  I'm looking for a way to take a 1-hour podcast MP3 file and split it into several several 2-minute MP3s. Along the way, I'd like to also do a few things like Amplify the volume. The problem I'm solving is that I have a crappy MP3 player that won't let me seek forward or backward, nor will it remember where I left it when I turn it off, plus, I listen to these in a seriously high-noise situation. Thus, I need to be able to skip forward in large chunks (2-5 minutes) to the point where I left it. Is there any decent way to do this? Audacity doesn't seem to have command-line capabilities. I'm willing to write some code, for example, to call something over the command line and get how long the MP3 file is, to later know how many pieces i'll have, and then say "create an MP3 with 0:00 to 2:00", "create an MP3 with 2:00 to 4:00", etc. I'm also willing to pay for the right tools if necessary. I also don't care how slow this runs, as long as I can automate it :-) I'm doing this on Windows. Any pointers / ideas? Thanks!

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Mass-migrating from POP3 to Exchange 2010, how do I copy mailboxes?

  - by Erik P. Skaalerud

  I'm in the process of planning our migration from an internal hosted POP3-server (dovecot) to Exchange 2010. We're using Outlook 2003 for the moment, but will soon upgrade to Outlook 2010. The big problem is that we have about 50 computers here in our HQ, plus ~30 clients in branch offices (wich will get their Exchange migration later sometime). I'm the only IT personel, and having to go around and manually set up Outlook and copy over their PST contents is not a option I'm looking for. Some users have set outlook to keep messages for X number of days on the POP3 server, others have not. Using a POP3 connector to transfer over the mails is not a viable option. Here is what I've done so far: Created a transform for the Office 2003 administrative installation point Created a .PRF file to modify any existing e-mail account to switch over to Exchange (including the RPC-encrypt hotfix described in MSKB 2006508) Tested both transform and PRF, both works Created a test-OU and GPO containing the Office 2003 installation with transform applied, also works My big question is: How can I force Outlook to import any existing .PST into the new Exchange mailbox when the user starts up Outlook for the first time after the MST/PRF have been applied? Is this possible?

  Read the article

• 3dmark score abnormal

  - by Sean

  I just bought a new laptop. It is core i7 3610QM.(Ivy bridge, 4 core plus hyperthreading), 8G ram, nvidia GT 610M 2GB. The OS is Win7 64bit. I ran 3dmark 11, but the score is frustrating. For 1280*720, the score is P730. It is too low right? I searched online, the score should at least above 1000. Am I right? I never use this software before. I know nvidia has optimus, so I made the laptop in high performance state and white-listed the 3dmark program. But there is no help. I am guessing 3dmark is using i7's graphic module. It cannot transform to nvidia. In the running detail of 3dmark, the graphic card cannot be identified(The row remain blank). Can anybody tell me is this the normal case? If not, can I use some other software to test if my nvidia card is working fine? If this nvidia card cannot work, I will return the new laptop asap. Thanks.

  Read the article

• 412 Precodition Failed error only occurs on certain networks

  - by Andy

  One of my favorite websites: http://jessiejofficial.com (yes, I'm a Jessie J Fan :')) has recently started displaying the error message "412 Precondition Failed" whenever I visit it from my home network, even when I use Tor Browser. At first I thought that this was an issue with the whole website, however I have contacted the web developer and he has said that they has been plenty of hits within the last 48 hours. Plus, I discovered tonight that I can access the website from my phone, through the mobile network. So it appears to just be my network as all of the devices in my house connected to the WiFi display the same error when I try to visit any page of the site. However there have been no changes that we are aware of or are noticeable to our network since the website was accessible, and I have just heard that another person in a different part of the country is experiencing the same difficulties also. Any help/advice/suggestions would be appreciated greatly Update: When trying to ping 'jessiejofficial.com' in Windows command prompt the request times out on all four attempts, on any computer connected to the wireless network. I can now also confirm that the same thing occurs on my MacBook Pro.

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >