Search Results

Search found 11363 results on 455 pages for 'elastic ip'.

Page 148/455 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Iptables NAT logging

  - by Gerard

  I have a box setup as a router using Iptables (masquerade), logging all network traffic. The problem: Connections from LAN IPs to WAN show fine, i.e. SRC=192.168.32.10 - DST=60.242.67.190 but for traffic coming from WAN to LAN it will show the WAN IP as the source, but the routers IP as the destination, then the router - LAN IP. I.e. SRC=60.242.67.190 - DST=192.168.32.199 SRC=192.168.32.199(router) - DST=192.168.32.10 How do I configure it so that it logs the conversations correctly? SRC=192.168.32.10 - DST=60.242.67.190 SRC=60.242.67.190 DST=192.168.32.10 Any help appreciated, cheers

  Read the article

• Cisco NAT + IPSec + Web Server Configuration Question

  - by zagman76

  Hello - I currently have a Cisco 881W, and it is configured with one of our static IPs to do basic NAT for the network. We also have a web server that needs it's own IP. I configured the NAT for the 2nd IP, however now traffic through our IPSec VPN doesn't route to the web server properly (well, it routes to the internet, rather than through the Tunnel). I followed the instructions here: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml But now the outbound NAT doesn't seem to be working properly - it keeps going to the NAT of the Cisco, and not the designated IP address. If anyone can assist, I would appreciate it greatly. Let me know what you need, and I'll get it to you! Thanks!

  Read the article

• Client can't reach my production webserver. It's their ISP's fault, but now what?

  - by MikeN

  I have a customer in Michigan who can't access my production SaaS webserver that is hosted on Slicehost. All other companies across the US/Canada/Europe have no problem reaching the site. This problem is occuring intermittantly, and Slicehost customer service says it's a problem with the client's ISP. I got the IP address of my client, and ping'ing that IP address from my PROD server fails, but ping'ing the IP address from my dev box or our seperate blog server (also hosted on slicehost) works. How do I debug a problem like this? I asked the client to reach out to their local ISP and ask about this problem. A traceroute shows that the packets are getting stopped on a Comcast Michigan node which is the client's ISP. Is there anything I can do additionally to fix this problem for my client?

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• Distribute outgoing connections among multiple IPs configured on the same NIC

  - by cedivad

  I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of the outgoing connections to be distributed among these ip. So if i have 3 opened connections, one connection will have result as having an IP address ending with .100, the other two should result as having as ip addresses .101 and .102. I'm using FreeBSD but I think this question to be Linux-Like wide.

  Read the article

• ASA firewalls: how does stateful filtering affect my access lists?

  - by Nate

  Ok, so assume that I have an ingress access list that looks like this: access-list outside_in extended ip permit any X.Y.Z.1 eq 25 access-group outside_in in interface outside And I want to do egress filtering. I want to allow inside machines to respond on port 80, and I want to allow ports over 1024. Given that the firewall is statefull, do I need to have the rule access-list inside_in extended ip permit X.Y.Z.1 any eq 25 in my inside_in ACL, or can I get away with just access-list inside_in extended ip permit any any gt 1024 access-group inside_in in interface inside In other words, if I apply an egress access list, do I have to explicitly allow machines to respond to requests allowed by the ingress access list, or does the statefullness of the firewall handle that for me? Thanks!

  Read the article

• Can't access network share with name defined in hosts file

  - by Einar Egilsson

  I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

  Read the article

• Amazon EC2 - Unable to connect to MySQL

  - by alexus

  I'm having issue connecting from one VM to another # nmap -p3306 ip-XX-XX-XX-XX.ec2.internal Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-10 17:50 EDT Nmap scan report for ip-XX-XX-XX-XX.ec2.internal (XX.XX.XX.XX) Host is up (0.000033s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 1.05 seconds # in my Security Group I allowed Inbound connectivity via port TCP, portrange 3306 and Source 0.0.0.0/0, so theoratically it should work, but in reality it doesn't( I'm running red hat enterprise linux 7 on both VMs. mariadb.service running fine on another VM and I am able to connect to it locally. DB's: # netstat -anp | grep 3306 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 2324/mysqld # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # Any ideas what else I missed?

  Read the article

• Shorewall SHOW DYNAMIC command doesn't work

  - by Andrew Burns

  Setting up shorewall dynamic zones, http://shorewall.net/Dynamic.html shows the command shorewall show dynamic zone where zone is one of your zones. I can get the add and delete commands to work, but not the show dynamic command. Here is a shell session, with output from ipset list that proves that the items are indeed there. $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16520 References: 66 Members: 192.168.85.153 $ shorewall add br0:192.168.85.200 CPREM Host br0:192.168.85.200 added to zone CPREM $ shorewall show dynamic CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 192.168.85.200 $ shorewall delete br0:192.168.85.200 CPREM Host br0:192.168.85.200 deleted from zone CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 I am using the packaged version from Ubuntu 12.04 (4.4.26.1-1)

  Read the article

• Ways to do simple failover with one server and two IPs

  - by CrassHoppr

  The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

  Read the article

• Configuring Wireless Network

  - by Vinod K

  I have vyataa router on VMware with 2 interfaces eth0 and eth1 eth0 is facing the internet eth0 is in Nat mode with dhcp on eth1 is in bridged mode with my ethernet with ip 10.0.2.34/24 The ethernet card is at ip 10.0.2.95/24 i have defined the nat rule. Hence internet is available at eth1 too. Now i am connecting a wireless router at "eth1" iball router, I have connected the router using a cable to the ethernet interface of my laptop. I have configured the WAN connection type as "Static IP" and given "10.0.2.34/24" All the clients that connect using wireless router cannot connect to the internet though. Could anyone provide me a solution for this.. Thank You!!

  Read the article

• OpenVPN client on Amazon EC2

  - by Matt Culbreth

  I have an account with an OpenVPN service, and I'd like to get that running on my EC2 instance running Ubuntu 12.04. I have my config file in /etc/openvpn, and it connects fine when I run sudo openvpn --config matt.ovpn. However, I then lose connectivity to the EC2 machine, and I can't SSH back to it until I reboot. Previously I have done things like sudo ip rule add from IP_ADDRESS table 10 and then sudo ip route add default via GATEWAY_IP table 10, but that's not working on EC2. Any ideas? My private IP address right now is 10.209.29.XXX and my gateway is 10.209.29.1.

  Read the article

• Very slow loading pages with router

  - by user984621

  I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

  Read the article

• Why is Server 2012 assigning "169.254.*.*" series when creating DHCP server?

  - by Seth

  I have a small office, with ATT Motorola modem (192.168.1.254) set as passthrough to Dlink DIR-815 (LAN 192.168.0.1) I am trying to setup DHCP server on Server 2012, and when I create new DHCP server, the title is created as 169.254.. instead of the domain name. (Domain clients can retrieve IP's as defined in the scope) Non-domain clients are not receiving IP's from the server but rather the Motorola... How do I assure DHCP setup is properly creating itself, and how do I make sure domain and non-domain clients get IP's from the server?

  Read the article

• How do I add client computers to a Windows SBS 2008 domain?

  - by Jonas

  We have a LAN and the router is the DHCP server. We have a server with Windows SBS 2008, it has the IP address 192.168.1.2 while the router has the IP address 192.168.1.1. I have set "DNS Relay" on the router to 192.168.1.2. I have tried to add a client computer to the SBS domain by visiting http://connect from the client computer. But that page doesn't exist. I can visit http://192.168.1.2/ then the default startpage for IIS7 is shown. I'm logged in as a local Administrator on the computer that I tries to add to the domain. How do I add the client computer to the SBS 2008 domain? The router is an D-Link DFL 200, and I have now set the "DNS Relay" to "Use address of LAN interface" instead of a specific IP-address. But it doesn't work.

  Read the article

• pptp VPN, routing

  - by Adrian

  Details: eth0 = current internet port pptp1 = VPN connection, if I connect to my provider, he give me an IP address, which is accessible from the internet. This is what I need. I want to connect through this IP back to my PC. I want to keep my primary internet connection (eth0) on my PC for all traffic, but route traffic to VPN for specified application/or port, to access application/port from the IP, which I given from the pptp provider. Huhh? Difficult but, it is possible? If yes, how? Incoming port will be always: 33340 Outgoing port can be change, but usually it is 33330

  Read the article

• How to do port forwarding in D-link Glb802c?

  - by Manish

  I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My questions are: What will be my Global Address 'To'? What will be my Global Address 'From'? In Destination Port "From" and "To" what do I select in the drop down list and port no for forwarding HTTP traffic (for my website)? In Local Port, what do I select in drop down list and port no?

  Read the article

• How to access an node of an LAN via WAN?

  - by gilzero

  Lets say I have a router that is connected to the Internet. An WAN IP address is given by ISP. It is using PPPoE ADSL, the IP address is not static, every time it connected, assigned a different IP address. There is an web server 192.168.0.100 running in the LAN. I heard something like DMZ + DynDNS can do the job? But not sure what these are and how they work. Any there way(s) to access the local node 192.168.0.100 via WAN, so that I can reach that node even I am not home. Thanks for any advice.

  Read the article

• configure HTTPS server on a cisco router

  - by Sara

  For the past week I was trying to configure an HTTPS server on a cisco 2900 router, I've used the following commands and assigned a username and password to privilege 15 however, when Im trying to access a given ip it requires a username and password however when I insert the username and password I configured it does not allow me to enter and i'm not sure where the problem is. Router(config)# ip http secure-server Router(config)# ip http authentication local These were the commands i used for the https server and also I used the following to assign the username and password Router(config)#username name privilege 15 secret 0 password where 'name' and 'password' represent the username and password respectively I'm trying to access the 192.168.14.1 interface on the router and the username and password i created are not authorized to enter (I got the commands from a cisco router manual)

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• route to vpn based on destination

  - by inquam

  I have a VPN connection on a Windows 7 machine. It's set up to connect to a server in US. Is it possible, and if so how, to setup so that .com destinations uses the vpn interface and .se destinations uses the "normal" connection? Edit (clarification): This is for outbound connections. I.e. the machine conencts to a server on foo.com and uses the VPN and the machine connects to bar.se and uses the "normal" interface. Let's say foo.com has an IP filter that ensures users are located in USA, if I go through the VPN I get a US ip and everything is fine. But tif all traffic goes this way the bar.se server that has a IP filter ensuring users are in Sweden will complain. So I want to route the traffic depending on server location. US servers through VPN and others through the normal interface.

  Read the article

• Get the "source network address" in Event ID 529 audit entries on Windows XP

  - by Make it useful Keep it simple

  In windows server 2003 when an Event 529 (logon failure) occures with a logon type of 10 (remote logon), the source network IP address is recorded in the event log. On a windows XP machine, this (and some other details) are omitted. If a bot is trying a brute force over RDP (some of my XP machines are (and need to be) exposed with a public IP address), i cannot see the originating IP address so i don't know what to block (with a script i run every few minutes). The DC does not log this detail either when the logon attempt is to the client xp machine and the DC is only asked to authenticate the credentials. Any help getting this detail in the log would be appreciated.

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• How to do port forwarding in D-link Glb802c?

  - by Manish

  I have some questions about port forwarding on my D-Link Router GLB-802C. For example: My local machine's IP is 117.1.1.81 My router's IP is 117.1.1.1 My Public (Web) IP is 117.16.1.1 My questions are: What will be my Global Address 'To'? What will be my Global Address 'From'? In Destination Port "From" and "To" what do I select in the drop down list and port no for forwarding HTTP traffic (for my website)? In Local Port, what do I select in drop down list and port no?

  Read the article

• Remote access to a KVM Ubuntu virtual server

  - by Lee

  I've just setup an ubuntu virtual server and everything seems to be working fine. I used KVM to get it working with a bridged network. I've given the virtual server a static ip address on my network. I don't seem to be able to connect to the virtual machine though from outside my network. If I'm on my own network it all works fine, I can ping the ip and connect to it. The virtual server can ping other machines and sites on the internet. I changed the port forwarding rules on my router to forward any connections on a specific port to the virtual server ip address thinking that was the problem, but it was still the same. Is there something I'm missing here which is blocking outside connections to the virtual machine? Thanks.

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >