Search Results

Search found 61544 results on 2462 pages for 'drive error'.

Page 149/2462 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Quantal analyzes the HD in any boot

  - by Lucio

  I have installed Ubuntu 12.10 formating the HDD. Any time that I turn on the PC and boot Ubuntu, it always analyzes my HDD in search for bad blocks. This is what happens: When I turn on the PC and load Ubuntu, before I can login my user, appears the following image. If I press C, the process ends and I can work, if I wait until the process can finish by itself also I can work. Also I had this problem, related to the HDD. My Hard Disk Driver is a Western Digital. Is there any problem on the system? Can I stop this procedure? Information that can help: tune2fs -l output

  Read the article

• SDcardReader/Writer is not connected

  - by Insuk

  My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

  Read the article

• Can I have a computer with 2 physical HDs, & Dual boot option, one for Windows & one for Ubuntu

  - by Frank

  When my HD failed in my old computer with a dual core, I immediately went out and bought a new 6 core PC because I needed it for business and had to have an immediate solution. The old computer was otherwise a good computer. I don't want to spend a $100+ for a new operating system for the old computer because the Windows 7 Professional opperating system for the new computer will only allow one install. So, I decided to look and see if there were any free operating systems and found Ubuntu. I downloaded it and burned a live CD and would like to try it on the old computer. I found a 200 GB HD I can buy for $30 and the seller will format it any way I want. There are also other HDs available at a similar price. What I was thinking I would like to do is buy 2 HDs. Then I can have one formatted for Ubuntu 12.04 and install Windows XP Pro SP1 on the other HD for which I have the original installation CD. Then I would like to have a dual boot option so that when I power up the computer, I can choose whether to use Windows XP or Ubuntu. Is this possible? If so, how would I do it, that is, arrange it so a dual boot option presents itself on power up.

  Read the article

• How to use unused space in ubuntu

  - by Ravi.Kumar

  I installed ubuntu on my machine with only 80 GB of memory anticipating that I will remove it later but now I want to keep it forever (until I am frustrated with linux). I have 500 GB in my machine and now I want to use that raw 420 GB of space. How I can I do that ? with "space/memory" I am referring to secondary memory not Ram. Here is output of : sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dcb77 Device Boot Start End Blocks Id System /dev/sda1 * 2048 136718335 68358144 83 Linux

  Read the article

• ManagementObjectSearcher error [migrated]

  - by Piotrek

  Some of our customers inform us that in some cases following error appears: System.Management.ManagementException: Blad dostawcy. at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() The error is generated while trying to loop through a colection returned by Get() method of the System.Mamangment.ManagementObjectSearcher object. This is the code of my method: private bool PrinterExists(string printerName) { bool retVal = false; SelectQuery q = new SelectQuery("select caption from win32_printer"); using (ManagementObjectSearcher searcher = new ManagementObjectSearcher(q)) { foreach (ManagementObject printer in searcher.Get()) { if(printer["Caption"].ToString() == printerName) { retVal = true; break; } } } return retVal; } It seems that the problem appears only on Windows XP. The only workaround I know is reconstruction of WMI database. It sometimes helps, but unfortunatelly not always. Can anyone tell me what is the reason of this error and how can I fix it?

  Read the article

• 2 Hard Drives.One Partition

  - by Nick

  I have two hard drives (One 500 GB and the other 750 GB). I would like to create a single partition which will include these 2 hard drives. I guess it works only with identical hard drives, correct me if I am wrong. I have these 2 drives at an old computer which I tuned and may turn it into a web server,so I'm going to install ubuntu on them. How can I make 2 or more hard drives behave as one in one partition?

  Read the article

• "Fatal Error" message during boot process

  - by Denja

  I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

  Read the article

• Moving 11.10 complete system to a new bigger Harddisk

  - by pl1nk

  I would like to move my current installation of Ubuntu 11.10 to a bigger harddisk, since the old one is failing. I would like to avoid solutions like dd block copying (since there would be unused space at the end) with something cleaner, but I'm open to suggestions. Partitions info: Size Used Avail Use% Mounted on Partition type Encrypted 19G 9.9G 7.6G 57% / ext4 59G 50G 6.2G 90% /home ext4 Yes What is the best way to accomplish such a task, preferably with advantages/disadvantages.

  Read the article

• Fake RAID (dmraid) not seeing new SATA drives

  - by rausch

  I have three drives in my machine, one SSD with 32GB and two 1TB drives, attached to an Intel 82801JI (ICH10) SATA AHCI Controller. The problem is, that I can access only one of the 1TB drives when the other one is not plugged in. When it is plugged in I see the drives as sda and sdb, but there seem to be no partitions. Looking at these drives with cfdisk, the partitions are there, though. Both of the 1TB drives are carrying a partition, being part of a software RAID1, created with mdadm. Before I threw the SSD into the mix, the other two have been working fine. Any hints?

  Read the article

• Partition does not start on physical sector boundary?

  - by jasmines

  I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

  Read the article

• Keep trying to install always throws error help!

  - by Hector Soto

  So I was installing 12.10 on my Asus g74sx laptop... Did everything the tutorial told me to do yet I keep getting an error saying that there was an error of input/output.. That I should check the hard drive and see if it needs replacement. I tried with 2 DVDs and did format twice my usb to fat 32 and mounted the image file for 12.10... No idea what is going on. Please help! Mmm I cannot add an image... I'll comment with the link to the error!

  Read the article

• Slow writing HDD speed, Ubuntu 12.04 64-bit, Thinkpad T520i

  - by pyc

  It seems that (but I'm not completely sure), that when I'm copying files from gigabit network to HDD, I can't use full potential of the network which in my case is about 60 MB/s, because HDD writing is so slow like lower than 10 MB/s, and also it's slowing down the whole system which becomes pretty much unresponsive, almost impossible to work with. Copying files to samba share residing at Ubuntu machine, connected to share from Windows 7, I'm completely sure my network equipment is OK, and there's no CPU intensive process on Ubuntu except smbd getting about 10-20% from time to time which I think is OK. Something here is burried deep I think, maybe even in kernel. Already tried to switch from AHCI to compatibility mode, and turning acpi on and off - nothing helped. So it's like HDD buffer is full and emptying slowly while machine is sluggish, load is about 3 to 4. Somebody experienced the similar problems? Some help on troubleshooting process and identifying the cause would be helpful too :) Thanks!

  Read the article

• Machine check error while booting from USB

  - by javanna

  I put the last Ubuntu iso on my USB stick using UNetBootin, after formatting it to fat32. I've already done that before with other operating systems and it worked. I can't actually boot Ubuntu from USB since I get a black screen with the error "Machine check error" on top the an automatic reboot happens. The error appears right after the boot, I can't see anything else before. I'm using my ASUS K53SV latop. Does anybody know how to solve this?

  Read the article

• Unstable after moving headless server from usb-hdd to usb pendrive

  - by nlee

  Ubuntu server 12.04.1 running from usb-hdd is rock solid for months. After copying the partitions to a Kingston usb pendrive the system will only run for 3-4 days before some services fail. Is running 12.04.1 from usb pendrive a viable approach? How do I troubleshoot the problem? In the meanwhile, I have reverted back to usb-hdd. Willing to buy a usb pendrive that is known to work. Recommendations?

  Read the article

• error:unknown filesystem grub rescue help

  - by Ridvan Çoban

  I'm trying to install ubuntu on my hdd which doesnt contain any operatin system, mbr or grub. (it has 3 partitions, 1st includes my data on ntfs file system, second is linux swap now, and third ex4 filesystem) Of course i don't want to lose my data on ntfs partition. Anyway i installed ubuntu on ex4 filesystem, selected sda as device for bootloader (not sda1,2 or 2). But i got error Error:unknown filesystem Grub rescue I tried ls command. It gives (hd0) , (hd,msdos1), (hd0,msdos2) and (hd0,msdos3). then tried ls (hd0)/, ls (hd0,1)/, ls (hd0,msdos2)/, ls (hd0,msdos3)/ to find the linux filesystem to boot. But i was unsuccessful. it all gave me unknown filesystem error. Am i missing or something?

  Read the article

• why does my lubuntu recognizes only lubuntu instalation cds?

  - by Hardi

  I installed lubuntu from alternate cd a month ago. Now when I needed to read some cd's, the cd try won't open. It can be opened before ubuntu boots up. It can be opened after entering sudo eject -i off from console. But it won't mount any other cd-roms, than just the lubuntu live-cd and lubuntu alternate instal cd, where it was installed from. "mount: no medium found on /dev/sr0" as output, when try to mount anything else. Problem can't be in corrupted sd's, because othe computer, did recognize them well.

  Read the article

• Error after installing Lubuntu 14.04 through liveUSB

  - by Veritas

  A friend asked me to install ubuntu on his toshiba NB 200 netbook to replace windows xp. I formatted the flash drive, ran an nb5sum check on the iso and after running netbootin , I checked the drive for errors. No problems so far. During the installation, while everything seemed normal, the installation regularly paused until I pressed a button or moved the mouse. After restarting, it doesn't boot and it starts a shell showing : "General error mounting filesystems A maintenance shell will now be started CONTROL-D will terminate this shell and reboot the system " Any ideas? Any help is appreciated!

  Read the article

• Fatal Error when booting

  - by Denja

  I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

  Read the article

• How to eliminate an old Ubuntu partition?

  - by GUI Junkie

  I installed Ubuntu 12.04 64-bit side by side with my previous 11.10 32-bit. As everything is working correctly, I want to eliminate the old partition. According to update-grub: Found Ubuntu 11.10 (11.10) on /dev/sda1 But according to GParted, /dev/sda1 is the boot partition! So, how can I discover which partition should be the boot partition for 12.04? Can I safely eliminate the /dev/sda1? Also, GParted gives /dev/sda5 as file system unknown, it's 2.93Gib and might be the swap partition (just guessing).

  Read the article

• Where is EasUS coming from?

  - by Malcolm Lawrie

  I have downloaded the Universal USB Installer and Ubuntu 12.04 Desktop as described on your site. I installed it to a 16Gb USB stick including the format option. Now when I try to boot from the stick into Ubuntu I get a couple of lines of script then a screen with EasUS Todo Backup with Backup. Recovery, Clone and Tools options, but no sign of Ubuntu starting. Where is the start Ubuntu option please? I can find no reference to EaseUS on your help pages.

  Read the article

• Error when I compile kernel 3.3.2 in ubuntu 12.04

  - by rock-alternativo

  I thinks is not a bug of ubuntu. This is the output: OBJCOPY arch/x86/boot/vmlinux.bin HOSTCC arch/x86/boot/tools/build BUILD arch/x86/boot/bzImage Setup is 16800 bytes (padded to 16896 bytes). System is 4599 kB CRC f77d64c0 Kernel: arch/x86/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 3268 modules ERROR: "__modver_version_show" [drivers/staging/rts5139/rts5139.ko] undefined! WARNING: modpost: Found 4 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2

  Read the article

• Silverlight 3.0 and ADO.NET data service framework(An error occurred while processing this request)

  - by ybbest

  Today , I try to write a Silverlight app that talks to SharePoint 2010 using the REST API.However after deploy the silverlight app and run the code , I got the following error.In order to fix this I need to make the target framework of your caller application to 4.0,in this case I need to use Silverlight 4.0 instead 3.0.After I have done that and redeploy the solution to the SharePoint.It works like a charm.   Exceptions details: System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. Request version ’1.0′ is too low for the response. The lowest supported version is ’2.0′. However , if you got the error like this: Could not load type ‘System.Data.Services.Providers.IDataServiceUpdateProvider’ from assembly ‘System.Data.Services, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089′,then you need to install ADO.NET Data Services Update for .NET Framework 3.5 SP1 ,you can download here (for windowns 7 and server 2008 r2 ) or here (for windows vista of server 2008).

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?

  - by Russel

  Being first to try Ubuntu. But Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?! Before installing 12.04 i had tried the Ubuntu 10.10 Version Live and it was perfect in showing my Local Disks. But it couldn't recognize my GTX 470 Graphics driver so i thought of trying the recent version i.e 12.04. Fortunately it solved the Graphics driver thing but now i am stuck with finding My Local Disks on 12.04. I am sorry if this is a silly question, but i know nothing of Ubuntu at the moment. Regards,

  Read the article

• Install failing new hard drives

  - by John

  I'm trying to install Ubuntu server 12.04 on my new hard drives but it seems to fail. Once past the option menu where is asked the partition to install the OS on, goes into a hold and no progress is shown afterwards. The hard disk I'm trying to install it on is: Western Digital WD20EARX The installation process hangs around 'installing core packages/installing the base system' . The CD comes through the test with being valid/ok. any help would be appreciated. Thanks in advance.

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >