Search Results

Search found 10893 results on 436 pages for 'failed'.

Page 149/436 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • HD failure questions ...

    - by JP
    I recently had one of my home PC hard drives fail. It was in a striped raid, so I had to rebuild the raid (no data lost, only the OS partition was there). Is there any way to diagnose exactly what went wrong with the drive? That is what caused the failure? Also, in general, what is a good way to dispose of a failed hard drive securely and realistically (I don't have thermite or muriatic acid)?

    Read the article

  • Windows 7 boot problem

    - by nijikunai
    My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

    Read the article

  • Looking for Fiddler2 help. connection to gateway refused...just got rid of a virus?

    - by john mackey
    I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed. Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

    Read the article

  • Jenkins CI fails to initialise

    - by jackweirdy
    I've just installed Jenkins-CI on Ubuntu 11.10 as according to the instructions found here, However the service fails to start. The error log shows this: Running from: /usr/share/jenkins/jenkins.war 10 Jun 2012 16:24:06 winstone.Logger logInternal INFO: Beginning extraction from war file 10 Jun 2012 16:24:10 hudson.WebAppMain contextInitialized SEVERE: Failed to initialize Jenkins java.lang.ExceptionInInitializerError The entire error log can be found on this pastebin I've tried looking for similar errors but I can't find anything. Any ideas would be appreciated.

    Read the article

  • Extract specific files in a tar archive using a wildcard

    - by AdrieanKhisbe
    I'm tring for a script to extract only jpeg pictures from an archive containing maky kind of files. To do so I tried first to use: tar -xf MyTar.tar *.jpg but it failed (*.jpg not found) and suggest me to use "--wildcard". So I tried tar -xf MyTar.tar --wildcard *.jpg I did that, but then the same error and a different warning saying yo me that the option "--wildcard" is ambigious. I've been over the manuel pages for tar, but didn't find a clue about the problem thanks

    Read the article

  • how to create a 802.11n wireless network between laptops and asus n-13 wireless adapter ?

    - by xpugur
    I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

    Read the article

  • how to create a 802.11n wireless network between laptops and asus n-13 wireless adapter ?

    - by xpugur
    I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

    Read the article

  • When and Where does Wubi mount it's virtual disks

    - by TuxPotato
    My use of the wubi-new-virtual-disk made Wubi start mounting this new virtual home disk over my /home folder. After the use of the script failed, I am left with Wubi constantly remounting an empty virtual disk over my /home folder. I followed the instructions on the Ubuntu website to revert the change, but the mounting continues. Where did Wubi put the mount operation, and how can I remove it? Thanks in advance!

    Read the article

  • APPCMD syntax issue

    - by Adam
    I am trying to setup recycling logging events, using the following: appcmd set config /section:applicationPools /[name=' AppPoolName '].recycling.logEventOnRecycle:time But I am getting this error: Failed to process input: The parameter ''].recycling.logEventOnRecycle:time' mus t begin with a / or - (HRESULT=80070057). I used this technet article but I cannot figure out where I went wrong. Any ideas?

    Read the article

  • Hot-swap drive got new name, can I change it on-the-fly?

    - by T.J. Crowder
    One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

    Read the article

  • Trouble burning CDs and DVDs in Windows

    - by Cory
    I've run into some errors writing CDs and DVDs recently: Trying to burn a dual layer disc using ImgBurn I come across this error when trying to finalize the disc. Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead In Anyone have an idea what could be the problem? There is no problem until it comes time to finalize the disc

    Read the article

  • What happens when a flash drive wears out?

    - by endolith
    Flash memory has a limited number of read/write cycles, after which it fails. What happens when it fails? Is it like a hard drive, where a failed write is silently moved to another part of the disk and that sector marked as bad and never used again, without data loss? Are there a limited number of replacement sectors? Do operating systems warn the user in some way?

    Read the article

  • Cannot install grub to RAID1 (md0)

    - by Andrew Answer
    I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

    Read the article

  • apt-get erroring because of a broken package

    - by MegaEduX
    Everytime I run apt-get install or update on my server I get the following error: (May not be exactly this because I am translating from portuguese) An error was found when processing: netatalk E: Sub-process /usr/bin/dpkg returned an error code (1) I am not trying to install that package. This error appeared when I tried to install that package, which failed to install, and it won't disappear. This doesn't prevent me from installing other packages. It installs them, just gives this error at the end.

    Read the article

  • what i should do in order to build curl without error?

    - by hugemeow
    failed when i run ./buildconf the error information is as follows: [mirror@home curl]$ ls acinclude.m4 CMakeLists.txt GIT-INFO MacOSX-Framework packages TODO-RELEASE Android.mk configure.ac include Makefile.am perl vc6curl.dsw buildconf COPYING install-sh Makefile.dist README winbuild buildconf.bat CTestConfig.cmake lib Makefile.msvc.names RELEASE-NOTES CHANGES curl-config.in libcurl.pc.in maketgz sample.emacs CHANGES.0 curl-style.el log2changes.pl missing src CMake docs m4 mkinstalldirs tests [mirror@home curl]$ ./config [mirror@home curl]$ ./buildconf buildconf: autoconf version 2.63 (ok) buildconf: autom4te version 2.59 (ERROR: does not match autoconf version) [mirror@home curl]$ echo $? 1

    Read the article

  • Problems with Windows XP Plug and Play devices, maybe relating to MSVCR71.dll

    - by Richard
    I believe this question is unanswered as of now so I appologize if I've overlooked it. I have been having trouble some external devices with windows recently and I'm trying my darnedest to get to the bottom of it. At first, my Zero Tension USB mouse would stop working...as in the laser in the bottom of it would be on and would register movement, but the mouse on the screen wouldn't budge even an inch. At first this would happen randomly and then it would correct itself. As time went on, it became more and more frequent. At some point, the computer would make the "doo doo" sound of plugging or unplugging a USB device when the mouse stopped/started working. I dealt with it for a while and usually if I rebooted my machine, the mouse would work again for a day or two. As more time has gone on, the computer fully does not recognize the mouse AT ALL...I have another mouse that I use with the computer that works just fine and cannot seem to figure out why my Zero Tension mouse has failed. I tried plugging the Zero Tension mouse into my Mac and low and behold, it works without hesitation and never stops on me... Needless to say, I am stumped about this. I figured because I had another mouse I could deal with the loss of my fancy one for now...until my speakers stopped being recognized. I have a set of Logitec speakers that I have plugged into my sound card. Again, every now and again the audio devices would cease to be recognized by my computer, but a reboot would fix the problem. Now my speakers do not work at all with my computer and I feel like it's time to ask for help. My computer seems to be having a neural shutdown...where I can plug in devices and the computer doesn't seem to notice anything wrong, but none of the devices work. I hope this doesn't get any worse! Please help! Also, on a potentially (un)related note, when I start up my machine I get the message "This application has failed to start because Msvcp71.dll was not found. Re-installing the application may fix this problem." in reference to qbupdate.exe I don't know if that DLL being messed up has anything to do with my mouse or speakers, but I figure it might...anyway, thanks in advance for an answer and let me know if I need to clarify anything. Let me sum up: Zero Tension Mouse gradually stopped working Logitec Speakers gradually stopped working MSVCR71.dll seems to be messed up I don't know if any of those are related but any help would be much appreciated

    Read the article

  • Schema changes with replication

    - by Even Mien
    What are the steps to make a schema change to a SQL Server 2005 database using transactional replication? I'm trying to add a database column. I thought if I removed the article for the table, made the schema change, and then added the article for the table back that the schema change would replicate. I am now getting the following error every minute or so: SQL Server errors Replication-Replication Distribution Subsystem: agent [jobname] failed. Invalid column name 'NewColumn'.

    Read the article

  • Ripping sound from online video through soundcard?

    - by overtherainbow
    Hello There are a couple of videos on the Web whose soundtracks I'd like to rip so I can listen to them at the gym, but all of the web apps like KeepVid that I tried failed downloading them. As a work-around, I'll just play the videos and record the soundtrack for later listening. Are there good applications for Windows, free or affordable, that will let me record whatever is being played on the soundcard? Thank you.

    Read the article

  • RHEL json gem installation requires make?

    - by Salahuddin559
    When I try to install json gem (gem install json), at first it fails to do so, because of some dev package issue. After fixing it, it fails saying that "sh: make: command not found" and "ERROR: Error installing json: ERROR: Failed to build gem native extension.". Why is it failing on make? Notice this is not Mac, this is in RHEL 5 (4 or 5, not sure). Why is it not able to do some "build gem native extension"?

    Read the article

  • Exim4 won't send message

    - by PeterMmm
    My exim4 don't send any message. The logs says 2011-03-09 15:59:57 1PxKrl-00038i-BT malware acl condition: clamd: ClamAV returned /var/spool/exim4/scan/1PxKrl-00038i-BT: lstat() failed: Permission denied. ERROR I supose that clamav (running clamd) does'nt have access rights on the mentioned file, but clamav is in the same group as Debian-exim (running exim4). Even changing the folder permissions to a+rwx has no effect. Any idea where to look for failure reason ?

    Read the article

  • How do I resolve an "Invalid Transaction" error saving a zone config in Brocade Web Tools?

    - by Frank Szczerba
    When trying to save zoning changes in the Zone Administration tool in Brocade Web Tools, I get the status "Failed to commit changes to fabric" and the messages window shows: --- start of commit (Enable Config) at: Fri Jul 23 2010 19:43:40 GMT+00:00 Invalid Transaction --- end of commit at: Fri Jul 23 2010 19:43:47 GMT+00:00 I've tried refreshing the config and just re-saving what is already on the switch, but can't get this message to go away.

    Read the article

  • Remote MySQL connection fails (10060)

    - by Stefan Åstrand
    When I am trying to connect to a MySQL database from a remote computer I get a prompt saying: Connection Failed: [HY000] [MySQL][ODBC 5.1 Driver]Can't Connect to MySQL server on 'XXX.XXX.XX.XX' (10060) I have created a user account in the MySQL Administrator and added a host to enable remote access, I have also made an exception for my Windows Firewall on port 3306 but the connection still fails. What is the problem? Thanks!

    Read the article

  • CAS auth fails while migrating wordpress-mu from apache to IIS

    - by jjcm
    Having an issue migrating a wordpress-mu installation that I have running with cas authentication enabled (using wpcas and phpcas 1.1.0) from apache on an ubuntu machine to IIS on a windows 2008 machine. While CAS authed fine under linux, I'm getting a "CAS Authentication failed! You were no authenticated." page that pops up whenever I enter in a correct login. Anyone know whats up or if there are some logs I can look at to get more info?

    Read the article

  • Spiceworks SQL Monitor cant authenticate

    - by user11457
    I have SpiceWorks 4.7, installed and added the sql monitor extension to monitor our SQL servers. It does identify our sql servers correctly, but when I put the login information in it can't authenticate, with the following error message. Authentication failed. Check the login and password, and ensure that the server is configured for remote connections. I get the same result trying to use windows authentication. WE do use an alternate port# could this be the problem?

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >