Search Results

Search found 5105 results on 205 pages for 'words'.

Page 149/205 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• How to get rid of Windows XP Pro Blue pop up screen

  - by LISA

  Windows XP user-home edition 36 bit. One day I woke to see a blue pop up screen from Microsoft Windows XP Pro. I have not installed anything new myself. The 'add on' pop up always comes on when I open up mozilla to surf the net. I always just close it out to not install anything. I then woke to have colored tabs, the new download status bar at the bottom and this pop up window that asks me to retype two words spaced, a timer of two minutes starts and states if no word put in system will shut off. I have let it run down more than a few times and it does not shut down. No other options to choose from. If I misspell with a lot of letters it tells me I did so, but if I can't read a few letters I guess at it although it is not and it lets me resume what I am doing. This window pops up every single minute no matter what I am doing. Please help, I'm really annoyed with this. I have searched the net all over and don't quit know what to look for anymore

  Read the article

• GtkView GtkSpell and myspell backend

  - by justadreamer

  Hi I have an IM client pidgin. It is launched under locale ru_RU.UTF-8 Then when I type messages in GtkView widget it highlights the misspelled words. However it uses a GtkSpell which uses enchant, which uses myspell backend (I provided it with symlink to openoffice dictionaries folder /usr/share/enchant/myspell -- /usr/share/myspell/dict). Now the problem is that whichever language I use - it still uses ru_RU language to select the dictionary, so all english text is being underlined as a misspelled text. When I switch locale to en_US and then launch pidgin under it - then all russian text becomes misspelled. I don't like this behaviour as I use pidgin to chat in both languages. Is there a way to somehow setup enchant/myspell so that it searches in both dictionaries en_US and ru_RU independent of the locale I launched pidgin (GtkView) in ? I have Debian lenny/5.0.1 distro. enchant version 1.5.0. /usr/share/enchant/enchant.ordering looks like this: *:myspell meaning that for all languages backend is myspell myspell dictionary.lst file looks like this: DICT en GB en_GB DICT en US en_US THES en US th_en_US_v2 THES en GB th_en_US_v2 THES ru RU th_ru_RU_v2 DICT ru RU ru_RU DICT uk UA uk DICT ru RU en_US

  Read the article

• Multidimensional data table?

  - by ShreevatsaR

  [Apologies if this sort of question is off-topic for SuperUser. Please redirect to the right place if so.] There is a 3-dimensional array of values. (That is, instead of a table/2-dimensional array with values in a grid, the values can be thought of in a cube instead.) Is there a way to display this "cube" interactively, ideally on a webpage? Specifically, given the data, it would work something like this: the user selects two of the 3 variables. He then sees a "stack" of tables, one for each value of the third variable (cross-sections, in other words). By selecting the appropriate table from the stack, he can see the (i,j,k) value he wants. The "technology" for displaying such a thing (stacked tables, rotation, etc.) already exists, so this seems the sort of thing that someone ought to have written already. To be clear: I don't need sophisticated graphics necessarily, just the ability to select from cross-sections of variables. But I have no experience with (say, for displaying on a webpage) what web gadgets exist, so I'm clueless how to even search for one. (Google searches like "multidimensional data visualization" didn't throw up anything useful. Google Spreadsheets can do a few kinds of charts which can be embedded on a webpage, but I cannot tell if this is one of them.) [I can imagine how it ought to work for higher dimensions. For four-dimensions, instead of selecting just a stack, you'd first select an (i,j) from an "outer table", which would show all (k,l) values for that (i,j). For higher dimensions, inductively: you select (i,j), and then repeat what you'd do with 2 fewer dimensions.] So has this been written? Is this easy to write? Where ought one to look for such a thing?

  Read the article

• Sharing between Vista and Windows 7

  - by Metro Smurf

  Vista Ultimate 32 bit Windows 7 Ultimate 64 bit I've read through similar questions about sharing between Win7 and Vista, but none of them have resolved my issue of not being able to share between Win7 and Vista: Connecting to a Vista shared folder from Windows 7 Networking Windows 7 and Vista Enable File sharing in Windows Vista Previously I had previously had my Vista and XP system sharing back and forth without any problems. I was able to access the shares without entering a user name / password in the NT challenge prompt (note: account names and passwords were different on the Vista and XP systems). Currently I replaced my XP system with a Win7 system. Now, when I attempt to access shares to/from Vista / Win7, I am continually prompted with an NT challenge to enter my credentials. Things I've Verified/Tried Both systems are on the same workgroup. Win 7 is using the Home network. Vista is using the Private network. In other words, neither system is using a Public network profile. Enabled file sharing with and without password protection on both Vista and Win7 Tried HomeGroup Connections (win7) with Windows to manage connections and Use user accounts to connect. Reviewed too many online articles to count to trouble shoot. Set the shares to have full control by everyone. Set up the shares directly on the directory and through the share manager. My Question How can I enable file sharing between Vista and Win7 without being prompted with a username/password challenge, ever?

  Read the article

• FreeNAS pool configuration - RAID1 + other drives

  - by trnelson

  Simple questions, really. I found this answer with a similar setup, but not sure it answers my question. If it does, I'm curious why since the answer seems a bit unsure: ZFS Hard Drive Configuration in FreeNAS I'm building a server which will be used primarily for backup, plus some media streaming, possibly with Plex. I seem to understand most everything I need, but I'm still a bit confused on how pools work, and how to configure them for my scenario. I will have 2x 2TB WD Red drives, which I plan on using in a mirrored set up (RAID1). This would be for backup, and I'd also like to do offsite backup to my CrashPlan account from this array. I also have a few other drives: 1.5TB, 320GB, 250GB. I'm not sure exactly what to do with them yet, but looking for options. FreeNAS OS will be running from a 16GB USB Flash drive. Would it be wise to use the 1.5TB as a backup-backup, essentially as a mirror or perhaps for snapshots of the 2TB RAID1? I'm still learning about snapshots. Should the 2TB mirrored drives be in their own pool? Should the other drives be set up in their own pools as well, or should they be JBOD in a single pool? They may or may not get much use since the 2TB array is plenty for me. Does a dataset basically mimic the idea of a partition or a network share? In other words, I would map \SERVER\Share to X: on my laptop? Let's say I wanted to use the 250GB drive as an encrypted drive to store all of my cat pictures. Would it have to be in its own pool? If I use jails apps, should they go in the backup RAID1, or in another place? Thank you!

  Read the article

• Is reliability reputation of mechanical keyboards overblown?

  - by Rarst

  A while back I worked up to finally buying mechanical keyboard (~$100 range, "black" switches) and was initially quite content with purchase. However just outside first year (read it - as soon as warranty expired) it started to develop repeat issues (press once, get chain of letter repeated) on multiple keys. It doesn't react to generic cleaning (up to compressed air) and searching Internet shows noticeable amount of people with similar-to-identical issues, spanning years. This makes me severely hesitant to buy another mechanical keyboard, considering: every other keyboard I ever owned, including ultra-cheap crap managed to last longer than that typing experience is nice, but not lifechanging-fan-forever nice for me my choice of mechanical keyboards is severely limited not many brands represented in local market and primarily crazy looking gamer models russian (not to mention russian and ukrainian if possible) layout excludes international ordering price tag for a meek year of use I got our of it is plain demoralizing It is obvious mechanical keyboards have their fans, but shopping around for "best fit" or getting into multiple hundreds price tags is probably not something I am highly interested in. Considering my constraints and bad experience with reliability, is it practical for me to sink more money into buying mechanical keyboard(s) again? In other words - manufacturers are beaming about how crazy reliable mechanical keyboards are. Are active long time users of such keyboards confidently of same opinion?

  Read the article

• tc u32 --- how to match L2 protocols in recent kernels?

  - by brownian

  I have a nice shaper, with hashed filtering, built at a linux bridge. In short, br0 connects external and internal physical interfaces, VLAN tagged packets are bridged "transparently" (I mean, no VLAN interfaces are there). Now, different kernels do it differently. I can be wrong with exact kernel verions ranges, please forgive me. Thanks. 2.6.26 So, in debian, 2.6.26 and up (up to 2.6.32, I believe) --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 Here, "kernel" matches two bytes in "protocol" field with 0x8100, but counts the beginning of ip packet as a "zero position" (sorry for my English, if I'm a bit unclear). 2.6.32 Again, in debian (I've not built vanilla kernel), 2.6.32-5 --- this works: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 at 20 flowid 1:200 Here, "kernel" matches the same for protocol, but counts offset from the beginning of this protocol's header --- I have to add 4 bytes to offset (20, not 16 for dst address). It's ok, seems more logical, as for me. 3.2.11, the latest stable now This works --- as if there is no 802.1q tag at all: tc filter add dev internal protocol ip parent 1:0 prio 100 \ u32 ht 1:64 match ip dst 192.168.1.100 flowid 1:200 The problem is that I couldn't find a way to match 802.1q tag so far. Matching 802.1q tag at past I could do this before as follows: tc filter add dev internal protocol 802.1q parent 1:0 prio 100 \ u32 match u16 0x0ed8 0x0fff at -4 flowid 1:300 Now I'm unable to match 802.1q tag with at 0, at -2, at -4, at -6 or like that. The main issue that I have zero hits count --- this filter is not being checked at all, "wrong protocol", in other words. Please, anyone, help me :-) Thanks!

  Read the article

• Implications of Multiple JobTracker nodes in a Hadoop cluster?

  - by Jim Dennis

  I get the impression that one can, potentially, have multiple JobTracker nodes configured to share the same set of MR (TaskTracker) nodes. I know that, conventionally, all the nodes in a Hadoop cluster should have the same set of configuration files (conventionally under /etc/hadoop/conf/ --- at least for the Cloudera Distribution of Hadoop (CDH). Can we define multiple Job Trackers in mapred-site.xml? Something like: <configuration> <property> <name>mapred.job.tracker</name> <value>jt01.mydomain.not:8021</value> </property> <property> <name>mapred.job.tracker</name> <value>jt02.mydomain.not:8021</value> </property> ... </configuration> Or is there some other allowed syntax for this? What are the implications of doing this. Does each JobTracker get information about the load on each TaskTracker node. In other words can the two JobTracker co-ordinated their scheduling across the TT nodes only based on the gossip information from the TTs or would they need to talk to one another? Is this documented anywhere?

  Read the article

• What exactly is a Deamon ? ( how to run a root command from apache binded script that uses www-data user )?

  - by user224235

  I am trying to run this command from WSGI script service httpd restart The problem is this command can only be run by root and apache uses the www-data user. it has been said the solution is to use a Deamon Process i suppose the idea is to send the command to a file that will be executed by a script that is considered "root" user.. its difficult to understand why they would call this a Deamon Process and try to scare me. Perhaps it should have been called : proxy process when i got the idea that this was a proxy process.. i thought about adding a line to /var/spool/cron/root that way the cron would execute the command for me. but of course this means i have to get the system time and then add 1 second to it and then add it to that line so cron would execute the command for me as root but my script demands an output instantly. so i suppose i need to create a DEAMON PROCESS that works like the cron. in other words it is a bash file that will execute the command in a plain file.. but will this DEAMON PROCESS be running a while command 24/7 every second ? would that not waste resources ? it only needs to activate itself to check for a command to execute when there is a command to be executed. i mean in PHP and other programming languages.. running a while statement when there is nothing to be executed could waste resources of the server.. so why should a deamon process constantly be listening for anything. i only want it to listen and execute when it is needed. i do not need a process that is constantly listening.

  Read the article

• Share one ssl certificate between multiples vhost

  - by Cesar

  I have a setup like this: <VirtualHost 192.168.1.104:80> ServerName domain1 DocumentRoot /home/domain/public_html ... </VirtualHost> <VirtualHost 192.168.1.104:80> ServerName domain2 DocumentRoot /home/domain2/public_html ... </VirtualHost> <VirtualHost 192.168.1.104:80> DocumentRoot /home/domain3/public_html ServerName domain3 ... </VirtualHost> <VirtualHost 192.168.1.104:443> ServerName domain3 SSLCertificateFile /usr/share/ssl/certs/certificate.crt SSLCertificateKeyFile /usr/share/ssl/private/private.key SSLCACertificateFile /usr/share/ssl/certs/bundle.cabundle ... </VirtualHost> I want to use domain3 certificate in the other domains, preferably without having to repeat all the <VirtualHost 192.168.1.104:443> config. In other words I want something like this: If the vhost has no explicit ssl config use cert for domain3 (/usr/share/ssl/certs/certificate.crt) Notes: 1.- I for sure will be setting more vhosts in the future 2.- I know (and don't care) of the ssl warnings the browser will show (hostname mismatch) If this possible? how?

  Read the article

• Windows Server 2012 Can't Print

  - by Chris

  I know this may sound incredibly stupid and there is probably an easy solution but I can't seem to find it. Friends of mine recently upgraded their server for their small business from the POS old one. New hardware and a change from Windows Server 2003 to Windows Server 2012. I've got everything they need transfered over and running except for printing. They need to be able to print to printers in the vans their technicians use from the server via remote desktop. In other words the use a laptop to remote desktop into the server and need to print invoices out from the remote server to printers attached locally via usb. On the old server they just installed the identical driver and that was it, they could print as needed. On this server no matter what we seem to do we can't get it to print remotely, and in the process we also discovered that the server can't even print to the network printer. It sees the printer on it's network and it sees (through redirect) the printers in the vans but when you hit print it claims it did and nothing happens. There isn't an issue with the printers themselves as every other device we have can print to them without issues. Is there some setting that is inhibiting the server from printing? Is there something I need to install (print server?) to add the functionality? Thanks in advance for helping me out here

  Read the article

• Problem with running a script at startup as root?

  - by Usman Ajmal

  Hi The main question: Is there a way I can run 'completely' one of my script when ubuntu's desktop appears no matter if root , administrator, desktop user or an unprivileged user logged in? What does the script do? The script mounts a partition, looks for a file in that partition and finally on the basis of that file a decision of copying a partition to another partition is made. That copying is done via dd if=/dev/sda2 of=/dev/sda5 When does the script run finely? Script runs smoothly when I run it from the terminal by sudo ./my_copying_script This command asks me for the password of currently logged in user. I enter the password and the script starts working. When does the script NOT run finely? I want to run the script at startup. I set it a startup program by using the Startup Applications utility of Ubuntu. Script ran at startup but exited at the dd command returing following error: dd: opening '/dev/sda2': Permission denied On edk's suggestion I set the owner of my_copying_script as root and set the SUID. Now the permissions of my_copying_script are (-rwsr-sr-x). edk's point of view was that once I set the suid, the startup program will run with the permissions of its owner. I did that but the same /dev/sda2 permission denied error came up. I then prefixed the dd with sudo as mentioned below sudo dd if=/dev/sda2 of=/dev/sda5 but this returned following error: sudo: no tty present and no askpass program specified In other words the mounting failed. If I run the script using sudo ./myProgram i don't face this problem and the drive gets mounted successfully.

  Read the article

• Apache using 100% CPU, once again

  - by CBenni

  Recently, apache2 started using 100% of CPU power: top gives me From other, similar threads, I took the tip to use mod_status. Aside from HUGE amounts of NULL requests, it gives: CPU Usage: u2.16 s1.32 cu0 cs0 - .0835% CPU load 1.2 requests/sec - 17.6 kB/second - 14.6 kB/request 8 requests currently being processed, 42 idle workers The access and error logs do not show anything surprising or intriguing at all. Note the .8% CPU usage. Another tip was to use strace: root@server:~# strace -p 1956 Process 1956 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...> And remains like this for at least half an hour, without producing any additional output. Restarting apache fixed the problem for less than a second The server runs a few custom python scripts aswell as a django-powered website on apache2 (up-to-date), but even turning the scripts off (or not having them active in the first place) did not change anything. After I stopped apache and powered my server off, powered it on a few minutes afterwards and restarted all my services, the CPU usage remained low for several hours, just in order to pop up again randomly (?) The DigitalOcean CPU stats on my server are: You can see how the CPU usage was super high for almost half a day until I restarted the bot - just to remain stable for several hours and then pop up again. I am completely at a loss of words and don't know what I could do to find out what piece of my code is giving me these problems or if apache itself is the cause... Therefore I would greatly appreciate any hints to the questions: What else can I try to do? Which things might I not have checked? Is this definitely in my own code? How do you find what part of python code crashes an app via a infinite loop or similar?

  Read the article

• Can I boot up a virtual machine natively?

  - by Anshul

  My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• How to secure an Internet-facing Elastic Search implementation in a shared hosting environment?

  - by casperOne

  (Originally asked on StackOverflow, and recommended that I move it here) I've been going over the documentation for Elastic Search and I'm a big fan and I'd like to use it to handle the search for my ASP.NET MVC app. That introduces a few interesting twists, however. If the ASP.NET MVC application was on a dedicated machine, it would be simple to spool up an instance of Elastic Search and use the TCP Transport to connect locally. However, I'm not on a dedicated machine for the ASP.NET MVC application, nor does it look like I'll move to one anytime soon. That leaves hosting Elastic Search on another machine (in the *NIX world) and I would probably go with shared hosting there. One of the biggest things lacking from Elastic Search, however, is the fact that it doesn't support HTTPS and basic authentication out of the box. If it did, then this question wouldn't exist; I'd simply host it somewhere and make sure to have an incredibly secure password and HTTPS enabled (possibly with a self-signed certificate). But that's not the case. That given, what is a good way to expose Elastic Search over the Internet in a secure way? Note, I'm looking for something that hopefully, will not require writing code to provide shims for the methods that I want (in other words, writing forwarders).

  Read the article

• Mesh Networked servers via vpn

  - by microspino

  I got a design idea and I would like to have some advice from SF about It. I have 5 customers with small real-estate databases. I've built for them a desktop app and now they would like to merge their database to share their data. I don't want to centralize everything in one place nor I want to do maintenance for servers. They told me also, that all of them in their offices, have little servers and maintenance guys available. Although everything seems suitable for web application, I had the idea to experiment something new: Any customer small-server wild be connected to the others in a sort of mesh network without a single point of failure and through VPNs. If one of the servers went down the customers could still connect to their databases from one of the other mesh networked servers instead of from the local one that is down. During normal operations all the servers sync the db with the others through VPNs. I can accept a half-day timing window of NON synched data, in other words, since I don't need real time synchronization, the server don't have to always stay in synch. I can migrate my data over to other Non-Sql technologies like CouchDB or Redis or whatever you suggest. As you can see I don't have a lot of constraints and although I could go with a web application I would like to delegate and decentralize support, data-privacy and management, as more as I can to my customers offices. Is that a crazy idea? Do you know If something similar exist? Which technology would you suggest?

  Read the article

• Apache2: Limit simultaneous requests & throttle bandwidth per IP/client?

  - by xentek

  I want to limit simultaneous requests & throttle bandwidth per IP/Client on a single apache vhost. In other words, I want to ensure that this site, which hosts large media files, doesn't get hammered by someone trying to download everything all at once (just happened the other night). I'd like to limit the outgoing transfer speed overall for this site, as well as limit the number of connections a single IP can make to the server to a sane default (i.e. within normal browser limits for multiple requests so page loads aren't effected too much). Bonus points if I can actually scope it to file types (i.e. leave web files alone, but apply these rules to just the media files). We're running Ubuntu 9.04 on all the servers, and have two apache/php servers being load balanced via Round Robin by a squid proxy server. MySQL is running on its own box as well. We've got plenty of bandwidth to give them, so I don't really want overall caps, but just want to throttle the amount of memory/CPU it takes to serve this site. There other sites on these servers that we don't want to apply these rules too, just want to keep this one from hogging all the resources. Let me know if you need more info! Thanks in advance for your suggestions!

  Read the article

• iTunes copy just metadata (song and album ratings, playlists) from iPod

  - by Jared Updike

  I have an iPod touch that I synched with my Windows computer (iTunes 9.0 I think) until my harddrive failed and I lost my entire library. I rebuilt the library (songs) from a year old backup (and various other source for songs) but my playlists and ratings are of course a year old. My iPod itself has most of the playlists and ratings I care most about (favorite songs and albums, rated 4 and 5, for example). I have a catch 22 situation where I feel nervous that I haven't backed up my iPod in around 4 months (when my drive failed) so I'd like to back it up as soon as possible... but if I back it up I have to clear all the songs and playlists and copy them back, which I can't really do since I need to rebuild my playlists on my computer first (using the data only available on my iPod!) The question: is there a better way to READ the information off my iPod than doing it manually, song by song and album by album and playlist by playlist (XML, text dump, database, spreadsheet, anything). In other words, mostly I want the information (metadata like ratings and playlists, not songs) copied off the iPod so I can more quickly get my iTunes library ratings and playlists re-built (manually) so I can finally wipe the music and back up my apps, etc. Then I'd like to copy the music back immediately. The part I'd like to avoid is manually navigating everything on my iPod to read through all the playlists and ratings (50 GB, 6,000+ songs) as I re-enter all of that data by hand. I've done a few dozen albums and it's pretty time consuming having to tap around on the iPod. Reading from a spreadsheet (for example, or XML which I could write a script to get into spreadsheet form) would probably help tremendously, plus then I'd have a backup of that information somewhere besides just my iPod.

  Read the article

• Correct use of SMTP "Sender" header?

  - by Eric Rath

  Our web application sends email messages to people when someone posts new content. Both sender and recipient have opted into receiving email messages from our application. When preparing such a message, we set the following SMTP headers: FROM: [email protected] TO: [email protected] SENDER: [email protected] We chose to use the author's email address in the FROM header in an attempt to provide the best experience for the recipient; when they see the message in their mail client, the author is clear. To avoid the appearance of spoofing, we added the SENDER header (with our own company email address) to make it clear that we sent the message on the author's behalf. After reading RFCs 822 and 2822, this seems to be an intended use of the sender header. Most receiving mail servers seem to handle this well; the email message is delivered normally (assuming the recipient mailbox exists, is not over quota, etc). However, when sending a message FROM an address in a domain TO an address in the same domain, some receiving domains reject the messages with a response like: 571 incorrect IP - psmtp (in reply to RCPT TO command) I think this means the receiving server only saw that the FROM header address was in its own domain, and that the message originated from a server it didn't consider authorized to send messages for that domain. In other words, the receiving server ignored the SENDER header. We have a workaround in place: the webapp keeps a list of such domains that seem to ignore the SENDER header, and when the FROM and TO headers are both in such a domain, it sets the FROM header to our own email address instead. But this list requires maintenance. Is there a better way to achieve the desired experience? We'd like to be a "good citizen" of the net, and all parties involved -- senders and recipients -- want to participate and receive these messages. One alternative is to always use our company email address in the FROM header, and prepend the author's name/address to the subject, but this seems a little clumsy.

  Read the article

• Deploying multiple identical copies of a virtual machine for compute tasks

  - by Reid

  I have a compute task which has a large number of library dependencies. I would like to deploy it on some of my company's large Linux clusters, where I do not have root. I could probably track down, compile, and install the right versions of all the libraries, but this looks to be quite tedious and would have to be repeated if I deployed it again somewhere else. On the other hand, it's pretty easy to install on current Ubuntu. This led me to wonder about a virtual machine approach. Could I put together a virtual machine which booted up, ran the computation (with parameters from and results to the host), and then shut down? In other words, I'd like a command like this that I could run on the host: $ ./run-vm --ram N --task /path/on/host/foo.sh --results /another/host/dir/ This would boot the VM, run foo.sh, and put the (relatively small) results of the computation in /another/host/dir/. It's important to start up many instances of the VM simultaneously, both on a single node and multiple nodes of the cluster. So it would be nice if I didn't have to make many copies of the VM virtual disk and metadata. As the task instances are completely independent, the VMs would not need any network support once deployed, or any outside communications beyond reading and writing the host filesystem. Is this possible, and if so, how might I go about doing it? Are there assumptions I've made above which are bogus?

  Read the article

• Is it bad to redirect http to https?

  - by jasondavis

  I just installed an SSL Certificate on my server. I use a web hosting panel called ZPanel that is an open source project. It then set up a redirect for all traffic on my domain on Port 80 to redirect it to Port 443. In other words, all my http://example.com traffic is now redirected to the appropriate https://example.com version of the page. The redirect is done in my Apache Virtual Hosts file with something like this... RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] My question is, are there any drawbacks to using SSL? Since this is not a 301 Redirect, will I lose link juice/ranking in search engines by switching to https? I appreciate the help. I have always wanted to set up SSL on a server, just for the practice of doing it, and I finally decided to do it tonight. It seems to be working well so far, but I am not sure if it's a good idea to use this on every page. My site is not eCommerce and doesn't handle sensitive data; it's mainly for looks and the thrill of installing it for learning. UPDATED ISSUE Strangely Bing creates this screenshot from my site now that it is using HTTPS everywhere...

  Read the article

• Server-side SSH jump hosts

  - by Dan Sosedoff

  Trying to figure out server side SSH jump hosts logic. Current network schema: [Client] <--> [Server A: hostname: a.com] <--> [Server B] [Client] <--> [Server A: hostname: b.com] <--> [Server C] Server A responds to both DNS records. Possible flow: Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically jump user onto Server B with ssh user2@server_b.com. Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically just user onto Server C with ssh user2@server_c.com. In other words, client should be able to connect to the target without performing any local configuration, assuming that we have a stock ssh config. The problem with ssh jumps is that user has to define hosts in local ~/.ssh/config file, which is not acceptable in my case. It needs to be a default sshd behavior. Im aware that you can define a custom command ~/.ssh/authorized_keys on server, but i dont think there is a way to properly detect source hostname where user tries to connect. It is possible at all ?

  Read the article

• Is it possible to map static IP to computer name instead of MAC address?

  - by xenon

  I have a number of computers with different hostnames connected to the network. They currently hold a static IP address based on their MAC address. In other words, the static IP address is mapped to their MAC address. This gives rise to a problem and that's when we swap the harddrive from one computer to another, the MAC address becomes different and the application we are running on the harddrive has problem getting the right static IP for it to work. We can't configure the IP address in the application all the time. And changing the static IP addresses to re-map to the computer's new MAC address can be quite a pain. Since all the computers have a unique computer name as their hostname, is it possible to configure such that when these computers grab IP addresses from the DHCP server, DHCP will learn about their hostname and assign the correct IP address? This is to say, the static IP is mapped to the computers' hostname instead of their MAC address. All the computers are running on Windows 7. Would this be possible? If so how should I go about do this?

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >