Search Results

Search found 1341 results on 54 pages for 'factor mystic'.

Page 15/54 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Strategy and AI for the game 'Proximity'

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal strategy then b) how to build an AI Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the high branching factor (starts out at 120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • Implementing a popularity algorithm in Django

    - by TheLizardKing
    I am creating a site similar to reddit and hacker news that has a database of links and votes. I am implementing hacker news' popularity algorithm and things are going pretty swimmingly until it comes to actually gathering up these links and displaying them. The algorithm is simple: Y Combinator's Hacker News: Popularity = (p - 1) / (t + 2)^1.5` Votes divided by age factor. Where` p : votes (points) from users. t : time since submission in hours. p is subtracted by 1 to negate submitter's vote. Age factor is (time since submission in hours plus two) to the power of 1.5.factor is (time since submission in hours plus two) to the power of 1.5. I asked a very similar question over yonder http://stackoverflow.com/questions/1964395/complex-ordering-in-django but instead of contemplating my options I choose one and tried to make it work because that's how I did it with PHP/MySQL but I now know Django does things a lot differently. My models look something (exactly) like this class Link(models.Model): category = models.ForeignKey(Category) user = models.ForeignKey(User) created = models.DateTimeField(auto_now_add = True) modified = models.DateTimeField(auto_now = True) fame = models.PositiveIntegerField(default = 1) title = models.CharField(max_length = 256) url = models.URLField(max_length = 2048) def __unicode__(self): return self.title class Vote(models.Model): link = models.ForeignKey(Link) user = models.ForeignKey(User) created = models.DateTimeField(auto_now_add = True) modified = models.DateTimeField(auto_now = True) karma_delta = models.SmallIntegerField() def __unicode__(self): return str(self.karma_delta) and my view: def index(request): popular_links = Link.objects.select_related().annotate(karma_total = Sum('vote__karma_delta')) return render_to_response('links/index.html', {'links': popular_links}) Now from my previous question, I am trying to implement the algorithm using the sorting function. An answer from that question seems to think I should put the algorithm in the select and sort then. I am going to paginate these results so I don't think I can do the sorting in python without grabbing everything. Any suggestions on how I could efficiently do this? EDIT This isn't working yet but I think it's a step in the right direction: from django.shortcuts import render_to_response from linkett.apps.links.models import * def index(request): popular_links = Link.objects.select_related() popular_links = popular_links.extra( select = { 'karma_total': 'SUM(vote.karma_delta)', 'popularity': '(karma_total - 1) / POW(2, 1.5)', }, order_by = ['-popularity'] ) return render_to_response('links/index.html', {'links': popular_links}) This errors out into: Caught an exception while rendering: column "karma_total" does not exist LINE 1: SELECT ((karma_total - 1) / POW(2, 1.5)) AS "popularity", (S... EDIT 2 Better error? TemplateSyntaxError: Caught an exception while rendering: missing FROM-clause entry for table "vote" LINE 1: SELECT ((vote.karma_total - 1) / POW(2, 1.5)) AS "popularity... My index.html is simply: {% block content %} {% for link in links %} karma-up {{ link.karma_total }} karma-down {{ link.title }} Posted by {{ link.user }} to {{ link.category }} at {{ link.created }} {% empty %} No Links {% endfor %} {% endblock content %} EDIT 3 So very close! Again, all these answers are great but I am concentrating on a particular one because I feel it works best for my situation. from django.db.models import Sum from django.shortcuts import render_to_response from linkett.apps.links.models import * def index(request): popular_links = Link.objects.select_related().extra( select = { 'popularity': '(SUM(links_vote.karma_delta) - 1) / POW(2, 1.5)', }, tables = ['links_link', 'links_vote'], order_by = ['-popularity'], ) return render_to_response('links/test.html', {'links': popular_links}) Running this I am presented with an error hating on my lack of group by values. Specifically: TemplateSyntaxError at / Caught an exception while rendering: column "links_link.id" must appear in the GROUP BY clause or be used in an aggregate function LINE 1: ...karma_delta) - 1) / POW(2, 1.5)) AS "popularity", "links_lin... Not sure why my links_link.id wouldn't be in my group by but I am not sure how to alter my group by, django usually does that.

    Read the article

  • Find optimal strategy and AI for the game 'Proximity'?

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal algorithm then b) how to build an AI. Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the insane branching factor (20^120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • Can overlay work with a portion of a page that has codebehind functionallity?

    - by rolando
    i have a complete DIV in wich a have a gridview and a multiview with codebehind action: <cc3:CRDataSource EnableViewState="true" ID="DsOpciones" runat="server" SQLSelect="CartelElectronico,OpcionSeleccion_Todos"> <Parameters> <asp:QueryStringParameter Name="@FactorEvaluacionId" QueryStringField="FactorEvaluacionId" Type="String" /> </Parameters> </cc3:CRDataSource> <cc3:CRGridView ID="gvTipoFactorSeleccion" runat="server" DataKeyNames="OpcionSeleccionID" AllowPaging="false" AllowSorting="False" AutoGenerateColumns="False" Titulo="Opciones de Factor de Evaluacion" NoRowsMsg="No se encontraron Opciones para el factor de evaluación" CssClass="Table" AllowExport="False" AllowFilter="False" AllowCollapse="True" EnableViewState="False" PageSize="1000000000" DataSourceID="DsOpciones" OnRowUpdating="gvTipoFactorSeleccion_RowUpdating" OnRowDeleting="gvTipoFactorSeleccion_RowDeleting"> <Columns> <asp:BoundField DataField="Nombre" HeaderText="Nombre" SortExpression="Nombre" ItemStyle-HorizontalAlign="Left" /> <asp:BoundField DataField="Puntos" HeaderText="Puntos" ItemStyle-HorizontalAlign="Center" /> <asp:CommandField ButtonType="Link" ShowDeleteButton="true" DeleteText="Eliminar" ShowEditButton="true" EditText="Modificar" UpdateText="Actualizar" CancelText="Cancelar" /> <asp:TemplateField Visible="false"> <ItemTemplate> </ItemTemplate> </asp:TemplateField> </Columns> </cc3:CRGridView> <br /> <table> <tr valign="baseline"> <td class="contratacionTablaSubrayadoTitulosLineas"> <label class="contratacionEtiquetas"> Opción&nbsp;(*) :</label> </td> <td class="contratacionTablaSubrayadoContenidoLineas"> <asp:TextBox ID="tbOpcion" runat="server" ToolTip="Nombre del Factor de la metodología de evaluación" TabIndex="1" MaxLength="100"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator13" runat="server" ControlToValidate="tbOpcion" ErrorMessage="&nbsp;Debe digitar un nombre para la Opción" Display="Dynamic" CssClass="inlineError" ValidationGroup="InsertarTipoFactorSeleccion" SetFocusOnError="false"></asp:RequiredFieldValidator> </td> </tr> <tr valign="baseline"> <td colspan="2" align="right"> <asp:LinkButton ID="LinkButton1" runat="server" CssClass="contratacionVinculos" ValidationGroup="InsertarTipoFactorSeleccion" OnClick="lbInsertarTipoFactorSeleccion_Click">Insertar</asp:LinkButton>&nbsp;|&nbsp; <asp:LinkButton ID="LinkButton2" runat="server" OnClick="lbCancelarInsertarTipoFactorSeleccion_Click" CssClass="contratacionVinculos" CausesValidation="false">Cancelar</asp:LinkButton> .... Thats just a portion of the div, my question is How can I show that DIV in a jquery overlay without loosing its functionallity? i'm asking because i manage to get it working but when i do a "that-div-postback" the screen loses the DIV and keeps only the background of the overlay. a couple more information: <button class="modalInput button" rel="#prompt"> Buscar</button> <script type="text/javascript"> function pageLoad() { var triggers = $("button.modalInput").overlay({ // some expose tweaks suitable for modal dialogs expose: { color: '#333', loadSpeed: 200, opacity: 0.3, zIndex: 99 }, top: '25%', closeOnClick: true }); } </script> Thanks in advance ;)

    Read the article

  • Find optimal/good-enough strategy and AI for the game 'Proximity'?

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal algorithm then b) how to build an AI. Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the insane branching factor (20^120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • 302: this blog will be closed

    - by preishuber
    After nearly 7 years I will discontinue blogging on this site. My resources are limited. You can reach my German blog which is used to support my customers. Looking back to a long an interesting journey ASP.NET by ScottGu That was the reason to attend this site and support Microsoft as much as I can. For that I was honored as ASP.NET MVP- thanks again. Meet Scoot several times. Great guy! Forums I have left NNTP forums a few years ago and now Microsoft closed it- It was my idea ;-) AJAX Was the wrong way- JQuery won the game IIS7 That is really a great plattform and the IIS team rules. I am sad that is so silent around that topic. ASP.NET after 2.0 Is no longer my world. I love ASP.NET and ASP.NET Server controls. I hate the discussion about how to follow the holy rules of MVC. Microsoft have dropped the goal to bring ASP.NET to #1 and accepted PHP is it. Facebook & Twittering Microblogging takes over a part of the blogging business. Shorter faster cheaper- or as SteveB mentioned - do more with less. Google Google is taking over the web. I am using Bing every time as I can but Google have more options. Sorry Microsoft you will loose that game. Apple That is not the biggest problem of Microsoft. the Ixxx takes over a small part but big money of the market, but the customers are not strongly linked. New wave new hype- Game over Apple. Silverlight My new home. I can reuse a lot of my skills and love the possibilitys. Silverligth will passing WPF-and strike Flash Windows phone 7 Also my skills fit. I just will use it for fun. I am not really satisfied about what I have heard from MIX. Guys from Redmond, I am sad to say you have been the best Smartphone OS and lost everything. The ADO vNext Story That will be the next mystic point. WCF, REST, JSON, ATOM and now OData. Nothing about SQL commands. LINQ, ORM is also not the final solution for multilayered disconnected async scenarios. Personally I prefere the OData idea and dislike the Swiss Army Knife (German Eierlegende Wollmilchsau) WCF. I am still in INETA Speakers board and I am glad to come to your user group. In all other cases you can hire me over ppedv AG. Good by and have good live.

    Read the article

  • Turnkey with LightSwitch

    - by Laila
    Microsoft has long wanted to find a replacement for Microsoft Access. The best attempt yet, which is due out in, or before, September is Visual Studio LightSwitch, with which it is said to be as 'easy as flipping a switch' to use Silverlight to create simple form-driven business applications. It is easy to get confused by the various initiatives from Microsoft. No, this isn't WebMatrix. There is no 'Razor', for this isn't meant for cute little ecommerce sites, but is designed to build simple database-applications of the card-box type. It is more clearly a .NET-based solution to the problem that every business seems to suffer from; the plethora of Access-based, and Excel-based 'private' and departmental database-applications. These are a nightmare for any IT department since they are often 'stealth' applications built by the business in the teeth of opposition from the IT Department zealots. As they are undocumented, it is scarily easy to bring a whole department into disarray by decommissioning a PC tucked under a desk somewhere. With LightSwitch, it is easy to re-write such applications in a standard, maintainable, way, using a SQL Server database, deployed somewhere reasonably safe such as Azure. Even Sharepoint or Windows Communication Foundation can be used as data sources. Oracle's ApEx has taken off remarkably well, and has shaken the perception that, for the business user, Oracle must remain a mystic force accessible only to the priests and acolytes. Microsoft, by comparison had only Access, which was first released in 1992, the year of the Madonna conical bustier. It looks just as dated. Microsoft badly needed an entirely new solution to the same business requirement that led to Access's and Foxpro's long-time popularity, but which had the same allure as ApEx. LightSwitch is sound in its ideas, and comfortingly conventional in its architecture. By giving an easy access to SQL Server databases, and providing a 'thumb and blanket' migration path to Access-heads, LightSwitch seems likely to offer a simple way of pulling more Microsoft users into the .NET community. If Microsoft puts its weight behind it, then it will give some glimmer of hope to the many Silverlight developers that Microsoft is capable of seeing through its .NET revolution.

    Read the article

  • Oracle’s New Memory-Optimized x86 Servers: Getting the Most Out of Oracle Database In-Memory

    - by Josh Rosen, x86 Product Manager-Oracle
    With the launch of Oracle Database In-Memory, it is now possible to perform real-time analytics operations on your business data as it exists at that moment – in the DRAM of the server – and immediately return completely current and consistent data. The Oracle Database In-Memory option dramatically accelerates the performance of analytics queries by storing data in a highly optimized columnar in-memory format.  This is a truly exciting advance in database technology.As Larry Ellison mentioned in his recent webcast about Oracle Database In-Memory, queries run 100 times faster simply by throwing a switch.  But in order to get the most from the Oracle Database In-Memory option, the underlying server must also be memory-optimized. This week Oracle announced new 4-socket and 8-socket x86 servers, the Sun Server X4-4 and Sun Server X4-8, both of which have been designed specifically for Oracle Database In-Memory.  These new servers use the fastest Intel® Xeon® E7 v2 processors and each subsystem has been designed to be the best for Oracle Database, from the memory, I/O and flash technologies right down to the system firmware.Amongst these subsystems, one of the most important aspects we have optimized with the Sun Server X4-4 and Sun Server X4-8 are their memory subsystems.  The new In-Memory option makes it possible to select which parts of the database should be memory optimized.  You can choose to put a single column or table in memory or, if you can, put the whole database in memory.  The more, the better.  With 3 TB and 6 TB total memory capacity on the Sun Server X4-4 and Sun Server X4-8, respectively, you can memory-optimize more, if not your entire database.   Sun Server X4-8 CMOD with 24 DIMM slots per socket (up to 192 DIMM slots per server) But memory capacity is not the only important factor in selecting the best server platform for Oracle Database In-Memory.  As you put more of your database in memory, a critical performance metric known as memory bandwidth comes into play.  The total memory bandwidth for the server will dictate the rate in which data can be stored and retrieved from memory.  In order to achieve real-time analysis of your data using Oracle Database In-Memory, even under heavy load, the server must be able to handle extreme memory workloads.  With that in mind, the Sun Server X4-8 was designed with the maximum possible memory bandwidth, providing over a terabyte per second of total memory bandwidth.  Likewise, the Sun Server X4-4 also provides extreme memory bandwidth in an even more compact form factor with over half a terabyte per second, providing customers with scalability and choice depending on the size of the database.Beyond the memory subsystem, Oracle’s Sun Server X4-4 and Sun Server X4-8 systems provide other key technologies that enable Oracle Database to run at its best.  The Sun Server X4-4 allows for up 4.8 TB of internal, write-optimized PCIe flash while the Sun Server X4-8 allows for up to 6.4 TB of PCIe flash.  This enables dramatic acceleration of data inserts and updates to Oracle Database.  And with the new elastic computing capability of Oracle’s new x86 servers, server performance can be adapted to your specific Oracle Database workload to ensure that every last bit of processing power is utilized.Because Oracle designs and tests its x86 servers specifically for Oracle workloads, we provide the highest possible performance and reliability when running Oracle Database.  To learn more about Sun Server X4-4 and Sun Server X4-8, you can find more details including data sheets and white papers here. Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software.  He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers. 

    Read the article

  • Why I&rsquo;m Getting an iPad

    - by andrewbrust
    I have never purchased an Apple product in my life.  That’s a “true fact.”  And, for that matter, the last Apple product I really wanted was an Apple IIe, back in the 1980s.  I couldn’t afford it though (I was in high school), so I got a Commodore 64 instead…it had the same microprocessor, after all.  If the iPhone were on Verizon, I probably would have picked one up in December, when I got my Droid.  And if the iPod Touch worked with my Napster subscription (which of course it does not, but my Sonos does) I might have picked on of those instead. That’s three strikes, but Apple’s not out.  I’ve decided I want the iPad.  Why?  Well, to start with, my birthday is March 31st…the iPad comes out on April 3rd, and my wife wanted to know what to get me.  Also, my house is a 7-minute walk from the Apple Store on West 14th Street in Manhattan.  This makes it easy to get my pre-ordered device on launch day, and get home quickly with it.  Oh, and I agreed to write an article for Redmond Magazine, the fee for which will pay for the device…that way the birthday present doesn’t have to be an extravagant expense.  Plus, I’m a contrarian, so I want to buy the one device from Apple that the fanboys have actually panned. Think those are bad reasons? How about this: I want to experience iPhone and iPad development and, although my app will probably never hit the App Store and run on the actual device, I still think owning one will help me develop something better.  i want to see if the slate form factor has good business usage scenarios.  I want to see if Business Intelligence technology on a device like this can work.  Imagine a dashboard on this thing. And, for the consumer experience, I really want a touch device on which I can surf the Web while I’m in the kitchen, or on the couch.  I don’t want the small form factor of my phone, I don’t want to use my TV, and I don’t want a keyboard that will get dirty or in my way. I don’t want to watch movies on it (my TV is good for that), so I don’t care that the iPad has a 4:3 screen.  I don’t want to read books on it, so I don’t care that the display is backlit LCD, rather than eInk. But really what I want is to understand, first hand, why people have such brand loyalty to Apple.  I know the big reasons; I’m not detached from society.  But I want to know the subtle points of what Apple does really well, and also what they do poorly.  And I’d like to know, once and for all, if Microsoft can beat Apple, if Microsoft can think the right way to beat Apple and if Microsoft should  even try to beat Apple. I expect to share my thoughts on these questions, as they develop.

    Read the article

  • Flash Actionscript 3.0 Game Projectile Creation

    - by Christian Basar
    I have been creating a side-scrolling Actionscript 3.0 game. In this game I want the Player to be able to shoot blow darts as weapons. I had some trouble getting the darts to be created in the right place (in front of the player), but eventually got it working with some help from this page (please look at it for background information on this problem): http://stackoverflow.com/questions/8031553/flash-actionscript-3-0-game-projectile-creation I got the darts to be created in the right place (near the player) and a 'movePlayerDarts()' function moves them. But I actually have a new problem. When the player moves after firing a dart, the dart tries to follow him! If the player jumps, the dart rises up. If the player moves to the left, the dart moves slightly to the left. Obviously, there is some code somewhere which is telling the darts to follow the player. I do not see how, unless the 'playerDartContainer' has something to do with that. But the container is always at position (0,0) and it does not move. Also, as a test I traced a dart's 'y' coordinate within the constantly-running 'movePlayerDarts()' function. As you can see, that function constantly moves the dart down the y axis by increasing its y-coordinate value. But when I jump, the 'y' coordinate being traced is never reduced, even though the dart clearly looks like it's rising! If anybody has any suggestions, I'd appreciate them! Here is the code I use to create the darts: // This function creates a dart public function createDart():void { if (playerDartContainer.numChildren <= 4) { // Play dart shooting sound sndDartShootIns.play(); // Create a new 'PlayerDart' object playerDart = new PlayerDart(); // Set the new dart's initial position and direction depending on the player's direction // Player's facing right if (player.scaleX == 1) { // Create dart in front of player's dart gun playerDart.x = player.x + 12; playerDart.y = player.y - 85; // Dart faces right, too playerDart.scaleX = 1; } // Player's facing left else if (player.scaleX == -1) { // Create dart in front of player's dart gun playerDart.x = player.x - 12; playerDart.y = player.y - 85; // Dart faces left, too playerDart.scaleX = -1; } playerDartContainer.addChild(playerDart); } } // End of 'createDart()' function This code is the EnterFrameHandler for the player darts: // In every frame, call 'movePlayerDarts()' to move the darts within the 'playerDartContainer' public function playerDartEnterFrameHandler(event:Event):void { // Only move the Player's darts if their container has at least one dart within if (playerDartContainer.numChildren > 0) { movePlayerDarts(); } } And finally, this is the code that actually moves all of the player's darts: // Move all of the Player's darts public function movePlayerDarts():void { for (var pdIns:int = 0; pdIns < playerDartContainer.numChildren; pdIns++) { // Set the Player Dart 'instance' variable to equal the current PlayerDart playerDartIns = PlayerDart(playerDartContainer.getChildAt(pdIns)); // Move the current dart in the direction it was shot. The dart's 'x-scale' // factor is multiplied by its speed (5) to move the dart in its correct // direction. If the 'x-scale' factor is -1, the dart is pointing left (as // seen in the 'createDart()' function. (-1 * 5 = -5), so the dart will go // to left at a rate of 5. The opposite is true for the right-ward facing // darts playerDartIns.x += playerDartIns.scaleX * 1; // Make gravity work on the dart playerDartIns.y += 0.7; //playerDartIns.y += 1; // What if the dart hits the ground? if (HitTest.intersects(playerDartIns, floor, this)) { playerDartContainer.removeChild(playerDartIns); } //trace("Dart x: " + playerDartIns.x); trace("Dart y: " + playerDartIns.y); } }

    Read the article

  • Adding custom interfaces to your mock instance.

    - by mehfuzh
    Previously, i made a post  showing how you can leverage the dependent interfaces that is implemented by JustMock during the creation of mock instance. It could be a informative post that let you understand how JustMock behaves internally for class or interfaces implement other interfaces into it. But the question remains, how you can add your own custom interface to your target mock. In this post, i am going to show you just that. Today, i will not start with a dummy class as usual rather i will use two most common interfaces in the .NET framework  and create a mock combining those. Before, i start i would like to point out that in the recent release of JustMock we have extended the Mock.Create<T>(..) with support for additional settings though closure. You can add your own custom interfaces , specify directly the real constructor that should be called or even set the behavior of your target. Doing a fast forward directly to the point,  here goes the test code for create a creating a mock that contains the mix for ICloneable and IDisposable using the above mentioned changeset. var myMock = Mock.Create<IDisposable>(x => x.Implements<ICloneable>()); var myMockAsClonable = myMock as ICloneable; bool isCloned = false;   Mock.Arrange(() => myMockAsClonable.Clone()).DoInstead(() => isCloned = true);   myMockAsClonable.Clone();   Assert.True(isCloned);   Here, we are creating the target mock for IDisposable and also implementing ICloneable. Finally, using the “as” for getting the ICloneable reference accordingly arranging it, acting on it and asserting if the expectation is met properly. This is a very rudimentary example, you can do the same for a given class: var realItem = Mock.Create<RealItem>(x => {     x.Implements<IDisposable>();     x.CallConstructor(() => new RealItem(0)); }); var iDispose = realItem as IDisposable;     iDispose.Dispose(); Here, i am also calling the real constructor for RealItem class.  This is to mention that you can implement custom interfaces only for non-sealed classes or less it will end up with a proper exception. Also, this feature don’t require any profiler, if you are agile or running it inside silverlight runtime feel free to try it turning off the JM add-in :-). TIP :  Ability to  specify real constructor could be a useful productivity boost in cases for code change and you can re-factor the usage just by one click with your favorite re-factor tool.   That’s it for now and hope that helps Enjoy!!

    Read the article

  • Lost in Translation – Common Mistakes Interpreting Patterns – Mark Simpson, Griffiths-Waite @ SOA, Cloud & Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 For details please visit the registration page International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Speaker: Mark Simpson, Griffiths-Waite Mark has been specialising in Oracle technology for 13 years, the last 10 of these with Griffiths Waite. Mark leads our SOA technology practice (covering SOA, Business Process Management and Enterprise Architecture). He is a much sought after presenter on the Oracle and SOA conference circuits, and a respected authority on these technologies. Mark has advised a host of UK leading organisations on the deployment of BPM / SOA solutions. Working closely with Oracle US Product Development Mark has contributed to Oracle's SOA Methodology and Oracle's SOA Maturity Model. Lost in Translation – Common Mistakes Interpreting Patterns Learn how small misinterpretations of high-level design patterns can have large and costly project ramifications. Good SOA design benefits from the use of a reference architecture and standardised design patterns. However both of these concepts give an abstracted view of the intended solution, which needs to be interpreted to become realised. A reference implementation is important to demonstrate how key design guidelines can be implemented in the toolset of choice, but the main success factor is how these are used through the build and post live phases of the project. This session will introduce practical design patterns with supporting implementation examples that, if used correctly, will give long term benefit. We will highlight implementations where misinterpretations or misalignment from pattern aims have led to issues post implementation. The session will add depth to the pattern discussions you are already having enabling confidence in proceeding to the next level of realisation whilst considering how they may be implemented within your solution and chosen toolset. September 25, 2012 - 13:55 KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Mark Simpson,Griffiths Waite,SOA Patterns,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

    Read the article

  • Columnstore Case Study #1: MSIT SONAR Aggregations

    - by aspiringgeek
    Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014.  Many of these can be found in this deck along with details such as internals, best practices, caveats, etc.  The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps.  In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data.  The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR.  By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows.  New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly.  Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements.  Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data.  "Conventional vs. Columnstore Metrics" document the raw data.  Note on this linear display the magnitude of the conventional index performance vs. columnstore.  The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing.  I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Subsequent features in this series document performance enhancements that are even more significant. 

    Read the article

  • Exploring TCP throughput with DTrace

    - by user12820842
    One key measure to use when assessing TCP throughput is assessing the amount of unacknowledged data in the pipe. This is sometimes termed the Bandwidth Delay Product (BDP) (note that BDP is often used more generally as the product of the link capacity and the end-to-end delay). In DTrace terms, the amount of unacknowledged data in bytes for the connection is the different between the next sequence number to send and the lowest unacknoweldged sequence number (tcps_snxt - tcps_suna). According to the theory, when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput. In other words, if we can fill the pipe without the peer TCP complaining (by virtue of its window size reaching 0), we are purely bandwidth-limited. If the peer's receive window is too small however, the sending TCP has to wait for acknowledgements before it can send more data. In this case the round-trip time (RTT) limits throughput. In such cases the effective throughput limit is the window size divided by the RTT, e.g. if the window size is 64K and the RTT is 0.5sec, the throughput is 128K/s. So a neat way to visually determine if the receive window of clients may be too small should be to compare the distribution of BDP values for the server versus the client's advertised receive window. If the BDP distribution overlaps the send window distribution such that it is to the right (or lower down in DTrace since quantizations are displayed vertically), it indicates that the amount of unacknowledged data regularly exceeds the client's receive window, so that it is possible that the sender may have more data to send but is blocked by a zero-window on the client side. In the following example, we compare the distribution of BDP values to the receive window advertised by the receiver (10.175.96.92) for a large file download via http. # dtrace -s tcp_tput.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 6 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 9 4096 | 14 8192 | 27 16384 | 67 32768 |@@ 1464 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 32396 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 16384 | 0 32768 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 17067 65536 | 0 Here we have a puzzle. We can see that the receiver's advertised window is in the 32768-65535 range, while the amount of unacknowledged data in the pipe is largely in the 65536-131071 range. What's going on here? Surely in a case like this we should see zero-window events, since the amount of data in the pipe regularly exceeds the window size of the receiver. We can see that we don't see any zero-window events since the SWND distribution displays no 0 values - it stays within the 32768-65535 range. The explanation is straightforward enough. TCP Window scaling is in operation for this connection - the Window Scale TCP option is used on connection setup to allow a connection to advertise (and have advertised to it) a window greater than 65536 bytes. In this case the scaling shift is 1, so this explains why the SWND values are clustered in the 32768-65535 range rather than the 65536-131071 range - the SWND value needs to be multiplied by two since the reciever is also scaling its window by a shift factor of 1. Here's the simple script that compares BDP and SWND distributions, fixed to take account of window scaling. #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @bdp["BDP(bytes)", args[2]-ip_daddr, args[4]-tcp_sport] = quantize(args[3]-tcps_snxt - args[3]-tcps_suna); } tcp:::receive / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @swnd["SWND(bytes)", args[2]-ip_saddr, args[4]-tcp_dport] = quantize((args[4]-tcp_window)*(1 tcps_snd_ws)); } And here's the fixed output. # dtrace -s tcp_tput_scaled.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 39 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 4 4096 | 9 8192 | 22 16384 | 37 32768 |@ 99 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 3858 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 512 | 0 1024 | 1 2048 | 0 4096 | 2 8192 | 4 16384 | 7 32768 | 14 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1956 131072 | 0

    Read the article

  • Is there an easy way to type in common math symbols?

    - by srcspider
    Disclaimer: I'm sure someone is going to moan about easy-of-use, for the purpose of this question consider readability to be the only factor that matters So I found this site that converts to easting northing, it's not really important what that even means but here's how the piece of javascript looks. /** * Convert Ordnance Survey grid reference easting/northing coordinate to (OSGB36) latitude/longitude * * @param {OsGridRef} gridref - easting/northing to be converted to latitude/longitude * @returns {LatLonE} latitude/longitude (in OSGB36) of supplied grid reference */ OsGridRef.osGridToLatLong = function(gridref) { var E = gridref.easting; var N = gridref.northing; var a = 6377563.396, b = 6356256.909; // Airy 1830 major & minor semi-axes var F0 = 0.9996012717; // NatGrid scale factor on central meridian var f0 = 49*Math.PI/180, ?0 = -2*Math.PI/180; // NatGrid true origin var N0 = -100000, E0 = 400000; // northing & easting of true origin, metres var e2 = 1 - (b*b)/(a*a); // eccentricity squared var n = (a-b)/(a+b), n2 = n*n, n3 = n*n*n; // n, n², n³ var f=f0, M=0; do { f = (N-N0-M)/(a*F0) + f; var Ma = (1 + n + (5/4)*n2 + (5/4)*n3) * (f-f0); var Mb = (3*n + 3*n*n + (21/8)*n3) * Math.sin(f-f0) * Math.cos(f+f0); var Mc = ((15/8)*n2 + (15/8)*n3) * Math.sin(2*(f-f0)) * Math.cos(2*(f+f0)); var Md = (35/24)*n3 * Math.sin(3*(f-f0)) * Math.cos(3*(f+f0)); M = b * F0 * (Ma - Mb + Mc - Md); // meridional arc } while (N-N0-M >= 0.00001); // ie until < 0.01mm var cosf = Math.cos(f), sinf = Math.sin(f); var ? = a*F0/Math.sqrt(1-e2*sinf*sinf); // nu = transverse radius of curvature var ? = a*F0*(1-e2)/Math.pow(1-e2*sinf*sinf, 1.5); // rho = meridional radius of curvature var ?2 = ?/?-1; // eta = ? var tanf = Math.tan(f); var tan2f = tanf*tanf, tan4f = tan2f*tan2f, tan6f = tan4f*tan2f; var secf = 1/cosf; var ?3 = ?*?*?, ?5 = ?3*?*?, ?7 = ?5*?*?; var VII = tanf/(2*?*?); var VIII = tanf/(24*?*?3)*(5+3*tan2f+?2-9*tan2f*?2); var IX = tanf/(720*?*?5)*(61+90*tan2f+45*tan4f); var X = secf/?; var XI = secf/(6*?3)*(?/?+2*tan2f); var XII = secf/(120*?5)*(5+28*tan2f+24*tan4f); var XIIA = secf/(5040*?7)*(61+662*tan2f+1320*tan4f+720*tan6f); var dE = (E-E0), dE2 = dE*dE, dE3 = dE2*dE, dE4 = dE2*dE2, dE5 = dE3*dE2, dE6 = dE4*dE2, dE7 = dE5*dE2; f = f - VII*dE2 + VIII*dE4 - IX*dE6; var ? = ?0 + X*dE - XI*dE3 + XII*dE5 - XIIA*dE7; return new LatLonE(f.toDegrees(), ?.toDegrees(), GeoParams.datum.OSGB36); } I found that to be a really nice way of writing an algorythm, at least as far as redability is concerned. Is there any way to easily write the special symbols. And by easily write I mean NOT copy/paste them.

    Read the article

  • Columnstore Case Study #1: MSIT SONAR Aggregations

    - by aspiringgeek
    Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014.  Many of these can be found in this deck along with details such as internals, best practices, caveats, etc.  The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps.  In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data.  The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR.  By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows.  New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly.  Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements.  Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data.  "Conventional vs. Columnstore Metrics" document the raw data.  Note on this linear display the magnitude of the conventional index performance vs. columnstore.  The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing.  I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more.  Subsequent features in this series document performance enhancements that are even more significant. 

    Read the article

  • How to analyze 'dbcc memorystatus' result in SQL Server 2008

    - by envykok
    Currently i am facing a sql memory pressure issue. i have run 'dbcc memorystatus', here is part of my result: Memory Manager KB VM Reserved 23617160 VM Committed 14818444 Locked Pages Allocated 0 Reserved Memory 1024 Reserved Memory In Use 0 Memory node Id = 0 KB VM Reserved 23613512 VM Committed 14814908 Locked Pages Allocated 0 MultiPage Allocator 387400 SinglePage Allocator 3265000 MEMORYCLERK_SQLBUFFERPOOL (node 0) KB VM Reserved 16809984 VM Committed 14184208 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 0 MultiPage Allocator 408 MEMORYCLERK_SQLCLR (node 0) KB VM Reserved 6311612 VM Committed 141616 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 1456 MultiPage Allocator 20144 CACHESTORE_SQLCP (node 0) KB VM Reserved 0 VM Committed 0 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 3101784 MultiPage Allocator 300328 Buffer Pool Value Committed 1742946 Target 1742946 Database 1333883 Dirty 940 In IO 1 Latched 18 Free 89 Stolen 408974 Reserved 2080 Visible 1742946 Stolen Potential 1579938 Limiting Factor 13 Last OOM Factor 0 Page Life Expectancy 5463 Process/System Counts Value Available Physical Memory 258572288 Available Virtual Memory 8771398631424 Available Paging File 16030617600 Working Set 15225597952 Percent of Committed Memory in WS 100 Page Faults 305556823 System physical memory high 1 System physical memory low 0 Process physical memory low 0 Process virtual memory low 0 Procedure Cache Value TotalProcs 11382 TotalPages 430160 InUsePages 28 Can you lead me to analyze this result ? Is it a lot execute plan have been cached causing the memory issue or other reasons?

    Read the article

  • A couple of questions on exceptions/flow control and the application of custom exceptions

    - by dotnetdev
    1) Custom exceptions can help make your intentions clear. How can this be? The intention is to handle or log the exception, regardless of whether the type is built-in or custom. The main reason I use custom exceptions is to not use one exception type to cover the same problem in different contexts (eg parameter is null in system code which may be effect by an external factor and an empty shopping basket). However, the partition between system and business-domain code and using different exception types seems very obvious and not making the most of custom exceptions. Related to this, if custom exceptions cover the business exceptions, I could also get all the places which are sources for exceptions at the business domain level using "Find all references". Is it worth adding exceptions if you check the arguments in a method for being null, use them a few times, and then add the catch? Is it a realistic risk that an external factor or some other freak cause could cause the argument to be null after being checked anyway? 2) What does it mean when exceptions should not be used to control the flow of programs and why not? I assume this is like: if (exceptionVariable != null) { } Is it generally good practise to fill every variable in an exception object? As a developer, do you expect every possible variable to be filled by another coder?

    Read the article

  • Evaluation of environment variables in command run by Java's Runtime.exec()

    - by Tom Duckering
    Hi, I have a scenarios where I have a Java "agent" that runs on a couple of platforms (specifically Windows, Solaris & AIX). I'd like to factor out the differences in filesystem structure by using environment variables in the command line I execute. As far as I can tell there is no way to get the Runtime.exec() method to resolve/evaluate any environment variables referenced in the command String (or array of Strings). I know that if push comes to shove I can write some code to pre-process the command String(s) and resolve enviroment variables by hand (using getEnv() etc). However I'm wondering if there is a smarter way to do this since I'm sure I'm not the only person wanting to do this and I'm sure there are pitfalls in "knocking up" my own implementation. Your guidance and suggestions are most welcome. edit: I would like to refer to environment variables in the command string using some consistent notation such as $VAR and/or %VAR%. Not fussed which. edit: To be clear I'd like to be able to execute a command such as: perl $SCRIPT_ROOT/somePerlScript.pl args on Windows and Unix hosts using Runtime.exec(). I specify the command in config file that describes a list of jobs to run and it has to be able to work cross platform, hence my thought that an environment variable would be useful to factor out the filesystem differences (/home/username/scripts vs C:\foo\scripts). Hope that helps clarify it. Thanks. Tom

    Read the article

  • Python: combining making two scripts into one

    - by Alex
    I have two separately made python scripts one that makes a sine wave sound based off time, and another that produces a sine wave graph that is based off the same time factors. I need help combining them into one running file. Here's the first: from struct import pack from math import sin, pi import time def au_file(name, freq, freq1, dur, vol): fout = open(name, 'wb') # header needs size, encoding=2, sampling_rate=8000, channel=1 fout.write('.snd' + pack('>5L', 24, 8*dur, 2, 8000, 1)) factor = 2 * pi * freq/8000 factor1 = 2 * pi * freq1/8000 # write data for seg in range(8 * dur): # sine wave calculations sin_seg = sin(seg * factor) + sin(seg * factor1) fout.write(pack('b', vol * 64 * sin_seg)) fout.close() t = time.strftime("%S", time.localtime()) ti = time.strftime("%M", time.localtime()) tis = float(t) tis = tis * 100 tim = float(ti) tim = tim * 100 if __name__ == '__main__': au_file(name='timeSound.au', freq=tim, freq1=tis, dur=1000, vol=1.0) import os os.startfile('timeSound.au') and the second is this: from Tkinter import * import math import time t = time.strftime("%S", time.localtime()) ti = time.strftime("%M", time.localtime()) tis = float(t) tis = tis / 100 tim = float(ti) tim = tim / 100 root = Tk() root.title("This very moment") width = 400 height = 300 center = height//2 x_increment = 1 # width stretch x_factor1 = tis x_factor2 = tim # height stretch y_amplitude = 50 c = Canvas(width=width, height=height, bg='black') c.pack() str1 = "sin(x)=white" c.create_text(10, 20, anchor=SW, text=str1) center_line = c.create_line(0, center, width, center, fill='red') # create the coordinate list for the sin() curve, have to be integers xy1 = [] xy2 = [] for x in range(400): # x coordinates xy1.append(x * x_increment) xy2.append(x * x_increment) # y coordinates xy1.append(int(math.sin(x * x_factor1) * y_amplitude) + center) xy2.append(int(math.sin(x * x_factor2) * y_amplitude) + center) sinS_line = c.create_line(xy1, fill='white') sinM_line = c.create_line(xy2, fill='yellow') root.mainloop()

    Read the article

  • How can a data ellipse be superimposed on a ggplot2 scatterplot?

    - by Radu
    Hi, I have an R function which produces 95% confidence ellipses for scatterplots. The output looks like this, having a default of 50 points for each ellipse (50 rows): [,1] [,2] [1,] 0.097733810 0.044957994 [2,] 0.084433494 0.050337990 [3,] 0.069746783 0.054891438 I would like to superimpose a number of such ellipses for each level of a factor called 'site' on a ggplot2 scatterplot, produced from this command: > plat1 <- ggplot(mapping=aes(shape=site, size=geom), shape=factor(site)); plat1 + geom_point(aes(x=PC1.1,y=PC2.1)) This is run on a dataset, called dflat which looks like this: site geom PC1.1 PC2.1 PC3.1 PC1.2 PC2.2 1 Buhlen 1259.5649 -0.0387975838 -0.022889782 0.01355317 0.008705276 0.02441577 2 Buhlen 653.6607 -0.0009398704 -0.013076251 0.02898955 -0.001345149 0.03133990 The result is fine, but when I try to add the ellipse (let's say for this one site, called "Buhlen"): > plat1 + geom_point(aes(x=PC1.1,y=PC2.1)) + geom_path(data=subset(dflat, site="Buhlen"),mapping=aes(x=ELLI(PC1.1,PC2.1)[,1],y=ELLI(PC1.1,PC2.1)[,2])) I get an error message: "Error in data.frame(x = c(0.0977338099339815, 0.0844334944904515, 0.0697467834016782, : arguments imply differing number of rows: 50, 211 I've managed to fix this in the past, but I cannot remember how. It seems that geom_path is relying on the same points rather than plotting new ones. Any help would be appreciated.

    Read the article

  • Handling conflicting priorities and expectations in project development

    - by jasonk
    There are any number of situations in the standard day where priority conflicts exist for projects. Management wants maximum productivity from employees. Marketing wants maximum salability and fast turnaround. Ownership wants maximum profit. Customers want usability and low cost. Regardless of the origin of the demands, time and money are always the limiting factor in business. Sometimes project elements have intrinsic or goodwill benefits for which there is not a hard, fast way to measure with monetary means (e.g. arguments for an attractive UI appeal vs. functional but plain). Other elements of software may have a method of providing “mental breaks” or motivating “cool factor” for developers that can get them back on track on other bigger, complex issues. While they may sidetrack the project short term they may have greater results long term through improved job satisfaction, etc. Continued training is a must, but working it in can setup back progress. What are your suggestions for setting priorities? How do you evaluate requests/demands on your projects? What are your suggestions for communicating and passing those on to your team in a way that they stay focused?

    Read the article

  • Get the parent id..

    - by tixrus
    I have a bunch of elements like the following: <div class="droppableP" id="s-NSW" style="width:78px; height:63px; position: absolute; top: 223px; left: 532px;"> </div> They all have class droppableP but different id's obviously and I would like to factor the code in this script I am hacking on. The original script just has a specific selector for each of one of these divs, but the code is all alike except for the id it does things to, which is either the id of the parent or another div with a name that's related to it. Here is the original code specifically for this div: $("#s-NSW > .sensible").droppable( { accept : "#i-NSW", tolerance : 'intersect', activeClass : 'droppable-active', hoverClass : 'droppable-hover', drop : function() { $('#s-NSW').addClass('s-NSW'); $('#s-NSW').addClass('encastrada'); //can't move any more.. $('#i-NSW').remove(); $('#s-NSW').animate( { opacity: 0.25 },200, 'linear'); checkWin(); } }); Here is how I would like to factor so the same code can do all of them and I will eventually do chaining as well and maybe get rid of the inline styles but here is my first go: $(".droppableP > .sensible").droppable( { accept : "#i" + $(this).parent().attr('id').substring(2), tolerance : 'intersect', activeClass : 'droppable-active', hoverClass : 'droppable-hover', drop : function() { $(this).parent().addClass($(this).parent().attr('id')); $(this).parent().addClass('encastrada'); $("#i" + ($this).parent().attr('id').substring(2)).remove(); $(this).parent().animate( { opacity: 0.25 },200, 'linear'); checkWin(); } }); The error I get is $(this).parent().attr("id") is undefined Many thanks. I have browsed related questions the one I understand that's closest to mine, turns out they didn't need parent function at all. I'm kind of a noob so please don't yell at me too hard if this is a stupid question.

    Read the article

  • R: convert data.frame columns from factors to characters

    - by Mike Dewar
    Hi, I have a data frame. Let's call him bob: > head(bob) phenotype exclusion GSM399350 3- 4- 8- 25- 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- GSM399351 3- 4- 8- 25- 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- GSM399352 3- 4- 8- 25- 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- GSM399353 3- 4- 8- 25+ 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- GSM399354 3- 4- 8- 25+ 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- GSM399355 3- 4- 8- 25+ 44+ 11b- 11c- 19- NK1.1- Gr1- TER119- I'd like to concatenate the rows of this data frame (this will be another question). But look: > class(bob$phenotype) [1] "factor" Bob's columns are factors. So, for example: > as.character(head(bob)) [1] "c(3, 3, 3, 6, 6, 6)" "c(3, 3, 3, 3, 3, 3)" [3] "c(29, 29, 29, 30, 30, 30)" I don't begin to understand this, but I guess these are indices into the levels of the factors of the columns (of the court of king caractacus) of bob? Not what I need. Strangely I can go through the columns of bob by hand, and do bob$phenotype <- as.character(bob$phenotype) which works fine. And, after some typing, I can get a data.frame whose columns are characters rather than factors. So my question is: how can I do this automatically? How do I convert a data.frame with factor columns into a data.frame with character columns without having to manually go through each column? Bonus question: why does the manual approach work?

    Read the article

  • Audio playback, creating nested loop for fade in/out.

    - by Dave Slevin
    Hi Folks, First time poster here. A quick question about setting up a loop here. I want to set up a for loop for the first 1/3 of the main loop that will increase a value from .00001 or similar to 1. So I can use it to multiply a sample variable so as to create a fade-in in this simple audio file playback routine. So far it's turning out to be a bit of a head scratcher, any help greatfully recieved. for(i=0; i < end && !feof(fpin); i+=blockframes) { samples = fread(audioblock, sizeof(short), blocksamples, fpin); frames = samples; for(j=0; j < frames; j++) { for (f = 0; f< frames/3 ;f++) { fade = fade--; } output[j] = audioblock[j]/fade; } fwrite(output,sizeof(short), frames, fpoutput); } Apologies, So far I've read and re-write the file successfully. My problem is I'm trying to figure out a way to loop the variable 'fade' so it either increases or decreases to 1, so as I can modify the output variable. I wanted to do this in say 3 stages: 1. From 0 to frames/3 to increace a multiplication factor from .0001 to 1 2. from frames 1/3 to frames 2/3 to do nothing (multiply by 1) and 3. For the factor to decrease again below 1 so as for the output variable to decrease back to the original point. How can I create a loop that will increase and decrease these values over the outside loop?

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >