Search Results

Search found 934 results on 38 pages for 'lo fye'.

Page 15/38 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Is there a way to get the PREMATCH ($`) and POSTMATCH ($') from pcrecpp?

  - by Eric Peers

  Is there a way to obtain the C++ equivalent of Perl's PREMATCH ($`) and POSTMATCH ($') from pcrecpp? I would be happy with a string, a char *, or pairs indices/startpos+length that point at this. StringPiece seems like it might accomplish part of this, but I'm not certain how to get it. in perl: $_ = "Hello world"; if (/lo\s/) { $pre = $`; #should be "Hel" $post = $'; #should be "world" } in C++ I would have something like: string mystr = "Hello world"; //do I need to map this in a StringPiece? if (pcrecpp::RE("lo\s").PartialMatch(mystr)) { //should I use Consume or FindAndConsume? //What should I do here to get pre+post matches??? } pcre plainjane c seems to have the ability to return the vector with the matches including the "end" portion of the string, so I could theoretically extract such a pre/post variable, but that seems like a lot of work. I like the simplicty of the pcrecpp interface. Suggestions? Thanks! --Eric

  Read the article

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

• Static IP on FEDORA12 from Virtualbox

  - by Krazy_Kaos

  I'm trying to get my FEDORA12 to have an STATIC IP - inside virtualbox - inside Ubuntu Let me rephrase that. I have an Ubuntu 9.04 system with vitualbox and a FEDORA12 vm there and I would like to put the fedora with an STATIC IP (amahi needs it), but I'm getting stuck... I'm using NAT (if that's any help) I tryid a few tutorials, but no go. I'm kind of new to the *nix world but I'm old school on M$ Edit: Screenshots UBUNTU 9.04 (host that has the vm) FEDORA (sory cant post pics... not enough rep) INFO: GUEST WITH STATIC: IFCONFIG: eth0 Link encap:Ethernet HWaddr 08:00:27:35:CC:DE inet addr:192.168.1.55 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe35:ccde/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:2764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574 (574.0 b) TX bytes:127121 (124.1 KiB) Interrupt:11 Base address:0xc020 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1856 errors:0 dropped:0 overruns:0 frame:0 TX packets:1856 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:181587 (177.3 KiB) TX bytes:181587 (177.3 KiB) NETSTAT -NR: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 GUEST WITH DHCP: IFCONFIG: eth0 Link encap:Ethernet HWaddr 08:00:27:35:CC:DE inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe35:ccde/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105 errors:0 dropped:0 overruns:0 frame:0 TX packets:2966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:49787 (48.6 KiB) TX bytes:149969 (146.4 KiB) Interrupt:11 Base address:0xc020 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1903 errors:0 dropped:0 overruns:0 frame:0 TX packets:1903 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185931 (181.5 KiB) TX bytes:185931 (181.5 KiB) NETSTAT -NR: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.0.2.2 0.0.0.0 UG 0 0 0 PS.: I'm still trying to workout the sudoer file to be able to exec the iptables command

  Read the article

• networking with ssh thru wireless

  - by nkvnkv

  I am using Ubuntu 12.04 64bit on my desktop and my laptop. Have install openssh client and server on both of them. My desktop is connected to ADSL2+ Router TD-8840 with wired connection and has 192.168.1.1 IP address. My laptop is connected to 150Mbps Wireless N Router TL-WR741ND with wireless connection and has 192.168.0.1 IP address. ADSL2+ Router TD-8840 and 150Mbps Wireless N Router TL-WR741ND are connected with a wired cable by useing blue port for on wlan on TL-WR741ND. ifconfig from desktop desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:92:37:1f:3d inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:92ff:fe37:1f3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57508 errors:0 dropped:0 overruns:0 frame:0 TX packets:44508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51547633 (51.5 MB) TX bytes:6371374 (6.3 MB) Interrupt:43 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 00:23:cd:b1:ff:e4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:22 Base address:0x8400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:109 errors:0 dropped:0 overruns:0 frame:0 TX packets:109 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12044 (12.0 KB) TX bytes:12044 (12.0 KB) ifconfig from laptop laptop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:a0:d1:65:2a:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31244 (31.2 KB) TX bytes:31244 (31.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:1b:19:81 inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::219:d2ff:fe1b:1981/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:874763 (874.7 KB) TX bytes:315401 (315.4 KB) I can connect to desktop from laptop via ssh with no problem, internet connection on laptop and desktop is working fine, but when I want to connect to laptop from desktop via ssh in terminal I type ssh [email protected] and get ssh: connect to host 192.168.0.101 port 22: Connection timed out If anyone is able to point out whats wrong?

  Read the article

• Getting error while install mod_wsgi on centos6.3 with python 2.7

  - by user825904

  In initially installed yum install mod_wsgi and i think it was linked with python 2.6 Now is there any way to link it with 2.7 I tried configuring from the source and i get this error apxs -c -I/usr/local/include/python2.7 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/lib64/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wformat-security -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.7 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1161:1: warning: "_POSIX_C_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:162:1: warning: this is the location of the previous definition In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1183:1: warning: "_XOPEN_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:164:1: warning: this is the location of the previous definition mod_wsgi.c: In function ‘wsgi_server_group’: mod_wsgi.c:991: warning: unused variable ‘value’ mod_wsgi.c: In function ‘Log_isatty’: mod_wsgi.c:1665: warning: unused variable ‘result’ mod_wsgi.c: In function ‘Log_writelines’: mod_wsgi.c:1802: warning: unused variable ‘msg’ mod_wsgi.c: In function ‘Adapter_output’: mod_wsgi.c:3087: warning: unused variable ‘n’ mod_wsgi.c: In function ‘Adapter_file_wrapper’: mod_wsgi.c:4138: warning: unused variable ‘result’ mod_wsgi.c: In function ‘wsgi_python_term’: mod_wsgi.c:5850: warning: unused variable ‘tstate’ mod_wsgi.c:5849: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_python_child_init’: mod_wsgi.c:7050: warning: unused variable ‘l’ mod_wsgi.c:6948: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_add_import_script’: mod_wsgi.c:7701: warning: unused variable ‘error’ mod_wsgi.c: In function ‘wsgi_add_handler_script’: mod_wsgi.c:8179: warning: unused variable ‘dconfig’ mod_wsgi.c:8178: warning: unused variable ‘sconfig’ mod_wsgi.c: In function ‘wsgi_hook_handler’: mod_wsgi.c:9375: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9377: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9379: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9383: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9403: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9405: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9408: warning: suggest parentheses around assignment used as truth value mod_wsgi.c: In function ‘wsgi_daemon_worker’: mod_wsgi.c:10819: warning: unused variable ‘duration’ mod_wsgi.c:10818: warning: unused variable ‘start’ mod_wsgi.c: In function ‘wsgi_hook_daemon_handler’: mod_wsgi.c:13172: warning: unused variable ‘i’ mod_wsgi.c:13170: warning: unused variable ‘elts’ mod_wsgi.c:13169: warning: unused variable ‘head’ mod_wsgi.c: At top level: mod_wsgi.c:8142: warning: ‘wsgi_set_user_authoritative’ defined but not used mod_wsgi.c:15251: warning: ‘wsgi_hook_check_user_id’ defined but not used /usr/lib64/apr-1/build/libtool --silent --mode=link gcc -o mod_wsgi.la -rpath /usr/lib64/httpd/modules -module -avoid-version mod_wsgi.lo -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/bin/ld: /usr/local/lib/libpython2.7.a(abstract.o): relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libpython2.7.a: could not read symbols: Bad value collect2: ld returned 1 exit status apxs:Error: Command failed with rc=65536 . make: *** [mod_wsgi.la] Error 1 Waiting for Graham

  Read the article

• Why can blocked IPs get through my iptables? What's wrong with this configuration?

  - by NeedSomeHelp

  (Why can/How are) blocked IPs (get/getting) through my iptables? Hello and thanks for your consideration... I have configured iptables and included (below) output from the command "iptables --line-numbers -n -L" yet IP addresses (like 31.41.219.180) from IP blocks I have already blocked are getting through. Please take a look and share any input you may have. Thank you. P.S. The initial ACCEPT IP addresses are for CloudFlare. . Chain INPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 32267 14M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 149 8570 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT udp -- * * 103.21.244.0/22 0.0.0.0/0 6 0 0 ACCEPT udp -- * * 103.22.200.0/22 0.0.0.0/0 7 0 0 ACCEPT udp -- * * 103.31.4.0/22 0.0.0.0/0 8 0 0 ACCEPT udp -- * * 104.16.0.0/12 0.0.0.0/0 9 0 0 ACCEPT udp -- * * 108.162.192.0/18 0.0.0.0/0 10 0 0 ACCEPT udp -- * * 141.101.64.0/18 0.0.0.0/0 11 0 0 ACCEPT udp -- * * 162.158.0.0/15 0.0.0.0/0 12 0 0 ACCEPT udp -- * * 173.245.48.0/20 0.0.0.0/0 13 0 0 ACCEPT udp -- * * 188.114.96.0/20 0.0.0.0/0 14 0 0 ACCEPT udp -- * * 190.93.240.0/20 0.0.0.0/0 15 0 0 ACCEPT udp -- * * 197.234.240.0/22 0.0.0.0/0 16 0 0 ACCEPT udp -- * * 198.41.128.0/17 0.0.0.0/0 17 0 0 ACCEPT udp -- * * 199.27.128.0/21 0.0.0.0/0 18 0 0 ACCEPT tcp -- * * 103.21.244.0/22 0.0.0.0/0 19 9 468 ACCEPT tcp -- * * 103.22.200.0/22 0.0.0.0/0 20 0 0 ACCEPT tcp -- * * 103.31.4.0/22 0.0.0.0/0 21 0 0 ACCEPT tcp -- * * 104.16.0.0/12 0.0.0.0/0 22 858 44616 ACCEPT tcp -- * * 108.162.192.0/18 0.0.0.0/0 23 376 19552 ACCEPT tcp -- * * 141.101.64.0/18 0.0.0.0/0 24 0 0 ACCEPT tcp -- * * 162.158.0.0/15 0.0.0.0/0 25 257 13364 ACCEPT tcp -- * * 173.245.48.0/20 0.0.0.0/0 26 0 0 ACCEPT tcp -- * * 188.114.96.0/20 0.0.0.0/0 27 0 0 ACCEPT tcp -- * * 190.93.240.0/20 0.0.0.0/0 28 0 0 ACCEPT tcp -- * * 197.234.240.0/22 0.0.0.0/0 29 0 0 ACCEPT tcp -- * * 198.41.128.0/17 0.0.0.0/0 30 92 4784 ACCEPT tcp -- * * 199.27.128.0/21 0.0.0.0/0 31 0 0 DROP tcp -- * * 1.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 32 0 0 DROP tcp -- * * 101.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 33 0 0 DROP tcp -- * * 102.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 34 0 0 DROP tcp -- * * 103.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 35 18 1080 DROP tcp -- * * 109.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 36 0 0 DROP tcp -- * * 112.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 37 12 656 DROP tcp -- * * 113.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 38 0 0 DROP tcp -- * * 114.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 39 0 0 DROP tcp -- * * 115.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 40 8 352 DROP tcp -- * * 116.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 41 0 0 DROP tcp -- * * 117.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 42 0 0 DROP tcp -- * * 118.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 43 2 120 DROP tcp -- * * 119.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 44 0 0 DROP tcp -- * * 120.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 45 0 0 DROP tcp -- * * 121.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 46 4 160 DROP tcp -- * * 122.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 47 4 240 DROP tcp -- * * 123.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 48 0 0 DROP tcp -- * * 125.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 49 0 0 DROP tcp -- * * 134.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 50 0 0 DROP tcp -- * * 146.185.0.0/16 0.0.0.0/0 tcp dpts:1:50000 51 6 360 DROP tcp -- * * 148.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 52 0 0 DROP tcp -- * * 151.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 53 0 0 DROP tcp -- * * 175.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 54 0 0 DROP tcp -- * * 176.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 55 0 0 DROP tcp -- * * 177.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 56 46 2696 DROP tcp -- * * 178.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 57 0 0 DROP tcp -- * * 179.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 58 4 224 DROP tcp -- * * 180.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 59 0 0 DROP tcp -- * * 181.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 60 0 0 DROP tcp -- * * 182.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 61 34 2040 DROP tcp -- * * 183.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 62 0 0 DROP tcp -- * * 185.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 63 0 0 DROP tcp -- * * 186.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 64 0 0 DROP tcp -- * * 187.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 65 18 912 DROP tcp -- * * 188.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 66 0 0 DROP tcp -- * * 189.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 67 0 0 DROP tcp -- * * 190.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 68 2 120 DROP tcp -- * * 192.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 69 0 0 DROP tcp -- * * 196.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 70 0 0 DROP tcp -- * * 197.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 71 5 300 DROP tcp -- * * 198.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 72 0 0 DROP tcp -- * * 2.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 73 0 0 DROP tcp -- * * 200.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 74 0 0 DROP tcp -- * * 201.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 75 6 360 DROP tcp -- * * 202.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 76 0 0 DROP tcp -- * * 203.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 77 4 160 DROP tcp -- * * 210.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 78 0 0 DROP tcp -- * * 211.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 79 2 96 DROP tcp -- * * 212.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 80 4 240 DROP tcp -- * * 213.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 81 0 0 DROP tcp -- * * 214.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 82 0 0 DROP tcp -- * * 215.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 83 0 0 DROP tcp -- * * 216.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 84 0 0 DROP tcp -- * * 217.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 85 4 172 DROP tcp -- * * 218.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 86 12 576 DROP tcp -- * * 219.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 87 7 372 DROP tcp -- * * 220.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 88 0 0 DROP tcp -- * * 222.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 89 0 0 DROP tcp -- * * 27.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 90 12 608 DROP tcp -- * * 31.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 91 11 528 DROP tcp -- * * 37.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 92 0 0 DROP tcp -- * * 41.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 93 0 0 DROP tcp -- * * 42.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 94 0 0 DROP tcp -- * * 43.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 95 8 480 DROP tcp -- * * 46.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 96 0 0 DROP tcp -- * * 49.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 97 6 360 DROP tcp -- * * 5.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 98 0 0 DROP tcp -- * * 58.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 99 0 0 DROP tcp -- * * 60.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 100 4 160 DROP tcp -- * * 61.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 101 32 1848 DROP tcp -- * * 62.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 102 0 0 DROP tcp -- * * 63.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 103 20 1200 DROP tcp -- * * 64.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 104 0 0 DROP tcp -- * * 65.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 105 266 15960 DROP tcp -- * * 66.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 106 3 180 DROP tcp -- * * 69.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 107 5 272 DROP tcp -- * * 72.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 108 0 0 DROP tcp -- * * 78.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 109 0 0 DROP tcp -- * * 81.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 110 3 180 DROP tcp -- * * 82.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 111 0 0 DROP tcp -- * * 83.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 112 8 384 DROP tcp -- * * 84.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 113 0 0 DROP tcp -- * * 85.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 114 0 0 DROP tcp -- * * 86.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 115 6 360 DROP tcp -- * * 87.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 116 7 408 DROP tcp -- * * 88.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 117 0 0 DROP tcp -- * * 89.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 118 0 0 DROP tcp -- * * 90.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 119 0 0 DROP tcp -- * * 91.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 120 3 152 DROP tcp -- * * 92.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 121 20 992 DROP tcp -- * * 93.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 122 9 512 DROP tcp -- * * 94.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 123 5 272 DROP tcp -- * * 95.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 124 0 0 DROP udp -- * * 1.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 125 0 0 DROP udp -- * * 101.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 126 0 0 DROP udp -- * * 102.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 127 0 0 DROP udp -- * * 103.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 128 0 0 DROP udp -- * * 109.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 129 0 0 DROP udp -- * * 112.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 130 0 0 DROP udp -- * * 113.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 131 0 0 DROP udp -- * * 114.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 132 1 112 DROP udp -- * * 115.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 133 0 0 DROP udp -- * * 116.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 134 0 0 DROP udp -- * * 117.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 135 0 0 DROP udp -- * * 118.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 136 0 0 DROP udp -- * * 119.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 137 0 0 DROP udp -- * * 120.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 138 0 0 DROP udp -- * * 121.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 139 0 0 DROP udp -- * * 122.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 140 0 0 DROP udp -- * * 123.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 141 0 0 DROP udp -- * * 125.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 142 0 0 DROP udp -- * * 134.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 143 0 0 DROP udp -- * * 146.185.0.0/16 0.0.0.0/0 udp dpts:1:50000 144 0 0 DROP udp -- * * 148.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 145 0 0 DROP udp -- * * 151.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 146 0 0 DROP udp -- * * 175.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 147 0 0 DROP udp -- * * 176.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 148 1 70 DROP udp -- * * 177.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 149 0 0 DROP udp -- * * 178.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 150 0 0 DROP udp -- * * 179.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 151 0 0 DROP udp -- * * 180.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 152 0 0 DROP udp -- * * 181.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 153 0 0 DROP udp -- * * 182.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 154 0 0 DROP udp -- * * 183.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 155 0 0 DROP udp -- * * 185.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 156 1 74 DROP udp -- * * 186.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 157 0 0 DROP udp -- * * 187.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 158 0 0 DROP udp -- * * 188.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 159 0 0 DROP udp -- * * 189.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 160 0 0 DROP udp -- * * 190.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 161 0 0 DROP udp -- * * 192.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 162 0 0 DROP udp -- * * 196.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 163 0 0 DROP udp -- * * 197.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 164 0 0 DROP udp -- * * 198.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 165 0 0 DROP udp -- * * 2.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 166 0 0 DROP udp -- * * 200.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 167 0 0 DROP udp -- * * 201.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 168 0 0 DROP udp -- * * 202.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 169 0 0 DROP udp -- * * 203.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 170 0 0 DROP udp -- * * 210.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 171 0 0 DROP udp -- * * 211.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 172 0 0 DROP udp -- * * 212.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 173 0 0 DROP udp -- * * 213.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 174 0 0 DROP udp -- * * 214.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 175 0 0 DROP udp -- * * 215.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 176 0 0 DROP udp -- * * 216.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 177 0 0 DROP udp -- * * 217.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 178 1 80 DROP udp -- * * 218.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 179 0 0 DROP udp -- * * 219.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 180 0 0 DROP udp -- * * 220.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 181 0 0 DROP udp -- * * 222.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 182 0 0 DROP udp -- * * 27.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 183 0 0 DROP udp -- * * 31.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 184 0 0 DROP udp -- * * 37.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 185 0 0 DROP udp -- * * 41.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 186 0 0 DROP udp -- * * 42.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 187 0 0 DROP udp -- * * 43.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 188 0 0 DROP udp -- * * 46.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 189 0 0 DROP udp -- * * 49.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 190 0 0 DROP udp -- * * 5.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 191 0 0 DROP udp -- * * 58.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 192 0 0 DROP udp -- * * 60.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 193 0 0 DROP udp -- * * 61.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 194 0 0 DROP udp -- * * 62.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 195 0 0 DROP udp -- * * 63.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 196 0 0 DROP udp -- * * 64.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 197 0 0 DROP udp -- * * 65.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 198 0 0 DROP udp -- * * 66.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 199 0 0 DROP udp -- * * 69.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 200 0 0 DROP udp -- * * 72.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 201 0 0 DROP udp -- * * 78.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 202 0 0 DROP udp -- * * 81.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 203 0 0 DROP udp -- * * 82.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 204 0 0 DROP udp -- * * 83.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 205 0 0 DROP udp -- * * 84.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 206 0 0 DROP udp -- * * 85.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 207 0 0 DROP udp -- * * 86.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 208 0 0 DROP udp -- * * 87.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 209 0 0 DROP udp -- * * 88.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 210 0 0 DROP udp -- * * 89.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 211 0 0 DROP udp -- * * 90.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 212 0 0 DROP udp -- * * 91.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 213 0 0 DROP udp -- * * 92.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 214 2 72 DROP udp -- * * 93.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 215 0 0 DROP udp -- * * 94.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 216 0 0 DROP udp -- * * 95.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 217 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:12443 218 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11443 219 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11444 220 23 1104 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8447 221 24 1152 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8443 222 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8880 223 207 11096 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 224 19 996 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 225 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 226 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 227 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 228 4 216 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 229 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:465 230 14 840 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 231 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 232 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 233 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 234 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:106 235 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 236 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5432 237 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9008 238 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9080 239 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:137 240 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:138 241 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 242 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 243 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 244 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 245 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 246 73 4488 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 247 77 23598 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0 5 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 31004 25M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 1 333 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 5 328 21324 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

  - by John Millikin

  I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

  Read the article

• Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

  - by Rob

  I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

  Read the article

• Confusion on networking service start/stop in Ubuntu

  - by Daniel Ball

  I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

  Read the article

• Virtual Network Interface and NAT disables localhost access for MySQL and Apache

  - by Interarticle

  I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

  Read the article

• Cliq Wireless questions

  - by Nathan Adams

  Heres the deal: I am by no means a Linux expert, even less when it comes to the Android OS but lets see if we can't solve this problem. The problem I am having is that on the Cliq we have a broadcom chip. In order to use the wireless card you must first insert the module into the kernel. Fine: # insmod /system/lib/dhd.ko insmod /system/lib/dhd.ko # lsmod lsmod dhd 164936 0 - Live 0xbf000000 # BUT netcfg (or ifconfig in busybox) does not recognize that there is a wireless adapter there: # netcfg netcfg lo UP 127.0.0.1 255.0.0.0 0x00000049 dummy0 DOWN 0.0.0.0 0.0.0.0 0x00000082 rmnet0 UP 14.67.164.2 255.255.255.252 0x00001043 rmnet1 DOWN 0.0.0.0 0.0.0.0 0x00001002 rmnet2 DOWN 0.0.0.0 0.0.0.0 0x00001002 usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002 # busybox ifconfig busybox ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:282 errors:0 dropped:0 overruns:0 frame:0 TX packets:282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18754 (18.3 KiB) TX bytes:18754 (18.3 KiB) rmnet0 Link encap:Ethernet HWaddr EE:83:E8:B4:4A:ED inet addr:14.x.x.x Bcast:14.67.164.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7148 errors:0 dropped:0 overruns:0 frame:0 TX packets:7659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2609236 (2.4 MiB) TX bytes:908575 (887.2 KiB) # For giggles if we attempt to launch wpa_supplicant anyways we get this: # wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf ioctl[SIOCSIWPMKSA]: No such device ioctl[SIOCSIWMODE]: No such device Could not configure driver to use managed mode ioctl[SIOCGIFFLAGS]: No such device Could not set interface 'eth0' UP ioctl[SIOCGIWRANGE]: No such device ioctl[SIOCGIFINDEX]: No such device CTRL-EVENT-STATE-CHANGE id=-1 state=0 ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWAUTH]: No such device WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: No such device WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device ioctl[SIOCGIFFLAGS]: No such device # In dmesg we get: <4>[18300.494065] dhd_oob_enable_intr : enable <4>[18305.019976] dhd_net_start failed bus is not ready <4>[18305.020278] dhdsdio_probe: dhd_net_start failed! Do I need to specify the firmware with insmod? Why are we trying to control the interface manually instead of through the Android API? The Android API doesn't support ad-hoc connections as far as I can tell. The card, I am sure, most certainly can.

  Read the article

• /proc/net/dev and /sys/class/net/ bogus network interface names

  - by sfink

  I am constructing a list of network interfaces to monitor based on the contents of /proc/net/dev. But I am getting some bogus interfaces in the list: __tmp1104705027 __tmp974528607 Where do those come from? They also show up in /sys/class/net/: # ls -1 /sys/class/net/ eth0 eth1 eth2 eth3 lo sit0 __tmp1104705027 __tmp974528607 For now, I think I'll just ignore anything starting with __tmp, but I'd like to know what they are and where they come from. This is on a recompiled CentOS 5.3 kernel: 2.6.18-128.7.1.el5.tvh.7PAE #1 SMP PREEMPT

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• NTPD issue - syncs then slowly loses ground

  - by ethrbunny

  RHEL 5 workstation. Has been running smoothly for years. I did a 'pup' recently and followed with a nice, cleansing reboot. Afterwards the system had some startup issues: namely MySQL refused to start. It just went "...." for 5-10 minutes before I did another boot and skipped that step (using 'interactive'). This was the only service that didn't wan't to start normally. So now that the system is booted I've found that it doesn't want to stay in sync with the NTP master and after 48 hours is refusing any SSH other than root. NTPD: this service starts normally and gets a lock on 4 servers. Almost immediately it starts to lose ground and now (after 3 days) is almost 40 hours behind. If I stop/start the service it gets the lock, resets the system clock and starts losing ground again. The 'hwclock' is set properly and maintains its time. Login: when I (re)start the ntp server I am able to login normally. I assume this problem is due to losing sync with LDAP. This appears to be verified by LDAP errors in /var/log/messages. Suggestions on where to look? ADDENDA: Tried deleting the 'drift' file. After a bit it gets recreated with 0.000. from /var/log/messages: Jan 17 06:54:01 aeolus ntpdate[5084]: step time server 129.95.96.10 offset 30.139216 sec Jan 17 06:54:01 aeolus ntpd[5086]: ntpd [email protected] Tue Oct 25 12:54:17 UTC 2011 (1) Jan 17 06:54:01 aeolus ntpd[5087]: precision = 1.000 usec Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface wildcard, 0.0.0.0#123 Disabled Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface wildcard, ::#123 Disabled Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface lo, ::1#123 Enabled Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface eth0, fe80::213:72ff:fe20:4080#123 Enabled Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface lo, 127.0.0.1#123 Enabled Jan 17 06:54:01 aeolus ntpd[5087]: Listening on interface eth0, 10.127.24.81#123 Enabled Jan 17 06:54:01 aeolus ntpd[5087]: kernel time sync status 0040 Jan 17 06:54:02 aeolus ntpd[5087]: frequency initialized 0.000 PPM from /var/lib/ntp/drift Jan 17 06:54:02 aeolus ntpd[5087]: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010) You can see the 30 second offset. This was after about one minute of operation.

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Kjus Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

• Accessing guests on virtual network when connected to host via PPTP

  - by Viktor Elofsson

  I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• iptables & allowed port refusing connection

  - by marfarma

  Can you see what I'm doing wrong? On Ubuntu Server 9.1, I'm attempting to allow traffic on port 1143 for a non-privileged IMAP host. Connection is refused when testing with telnet example.com 1143 but connection is allowed testing with telnet example.com 80 from my pc to remote internet hosted server. Both rules appear identical and are located near each other with no rules rejecting connections intervening in the rules file. I can't figure it out. iptables -L returns this: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere REJECT all -- anywhere 127.0.0.0/8 reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http-alt ACCEPT tcp -- anywhere anywhere tcp dpt:7070 ACCEPT tcp -- anywhere anywhere tcp dpt:1143 ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh ACCEPT icmp -- anywhere anywhere icmp echo-request LOG all -- anywhere anywhere limit: avg 5/min burst 5 LOG level debug prefix `iptables denied: ' REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere and my rules file contains this: # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *nat :PREROUTING ACCEPT [3556:217296] :POSTROUTING ACCEPT [6909:414847] :OUTPUT ACCEPT [6909:414847] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT # Completed on Wed May 26 19:08:34 2010 # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *filter :INPUT ACCEPT [1:52] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1:212] -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 ! -i lo -j REJECT --reject-with icmp-port-unreachable -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -j ACCEPT -A INPUT -p tcp -m tcp --dport 7070 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1143 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 -A INPUT -j REJECT --reject-with icmp-port-unreachable -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j ACCEPT COMMIT # Completed on Wed May 26 19:08:34 2010

  Read the article

• Keep source IP after NAT

  - by John Miller

  Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

  Read the article

• FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

  - by KennyDs

  We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

  Read the article

• Routing all data through an VPN tunnel with ppp

  - by Oliver

  I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

  Read the article

• Do I need a hardware firewall for Win 2003?

  - by user531723

  We have had a Win 2003 server at a co-lo for a while. It is used as a web server and has a very cheap hardware firewall between it and the internet. Ports 3389 and 80 are the only ones forwarded to the server. I am doing some upgrading and wondering if I really need the firewall. Are there any drawbacks to just using the Win 2003 built in firewall to make sure only traffic on 3389 and 80 get through?

  Read the article

• SSH stops at "using username" with IPTables in effect

  - by Rautamiekka

  We used UFW but couldn't make the Source Dedicated ports open, which was weird, so we purged UFW and switched to IPTables, using Webmin to configure. If the inbound chain is on DENY and SSH port open [judged from Webmin], PuTTY will say using username "root" and stops at that instead of asking for public key pw. Inbound chain on ACCEPT the pw is asked. This problem didn't happen with UFW. Picture of IPTables configuration in Webmin: http://s284544448.onlinehome.us/public/PlusLINE%20Dedicated%20Server,%20Webmin,%20IPTables,%200.jpgThe address is to the previous rautamiekka.org. iptables-save when on INPUT DENY: # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *mangle :PREROUTING ACCEPT [1430:156843] :INPUT ACCEPT [1430:156843] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1415:781598] :POSTROUTING ACCEPT [1415:781598] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *nat :PREROUTING ACCEPT [2:104] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1247:708906] -A INPUT -i lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT -A INPUT -p tcp -m comment --comment "Services - TCP" -m tcp -m multiport --dports 22,80,443,10000,20,21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m comment --comment "Minecraft - TCP" -m tcp --dport 25565 -j ACCEPT -A INPUT -p udp -m comment --comment "Minecraft - UDP" -m udp --dport 25565 -j ACCEPT -A INPUT -p tcp -m comment --comment "Source Dedicated - TCP" -m tcp --dport 27015 -j ACCEPT -A INPUT -p udp -m comment --comment "Source Dedicated - UDP" -m udp -m multiport --dports 4380,27000:27030 -j ACCEPT -A INPUT -p udp -m comment --comment "TS3 - UDP - main port" -m udp --dport 9987 -j ACCEPT -A INPUT -p tcp -m comment --comment "TS3 - TCP - ServerQuery" -m tcp --dport 10011 -j ACCEPT -A OUTPUT -o lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT COMMIT # Completed on Wed Apr 11 16:09:20 2012 iptables --list when on INPUT DENY: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ ACCEPT tcp -- anywhere anywhere /* Services - TCP */ tcp multiport dports ssh,www,https,webmin,ftp-data,ftp state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere /* Minecraft - TCP */ tcp dpt:25565 ACCEPT udp -- anywhere anywhere /* Minecraft - UDP */ udp dpt:25565 ACCEPT tcp -- anywhere anywhere /* Source Dedicated - TCP */ tcp dpt:27015 ACCEPT udp -- anywhere anywhere /* Source Dedicated - UDP */ udp multiport dports 4380,27000:27030 ACCEPT udp -- anywhere anywhere /* TS3 - UDP - main port */ udp dpt:9987 ACCEPT tcp -- anywhere anywhere /* TS3 - TCP - ServerQuery */ tcp dpt:10011 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ The UFW rules prior to purging on INPUT DENY: 127.0.0.1 ALLOW IN 127.0.0.1 3306 DENY IN Anywhere 20,21/tcp ALLOW IN Anywhere 22/tcp (OpenSSH) ALLOW IN Anywhere 80/tcp ALLOW IN Anywhere 443/tcp ALLOW IN Anywhere 989 ALLOW IN Anywhere 990 ALLOW IN Anywhere 8075/tcp ALLOW IN Anywhere 9987/udp ALLOW IN Anywhere 10000/tcp ALLOW IN Anywhere 10011/tcp ALLOW IN Anywhere 25565/tcp ALLOW IN Anywhere 27000:27030/tcp ALLOW IN Anywhere 4380/udp ALLOW IN Anywhere 27014:27050/tcp ALLOW IN Anywhere 30033/tcp ALLOW IN Anywhere

  Read the article

• Delete files from directory: memory exhausted

  - by codeholic

  This question is a logical continuation of http://serverfault.com/questions/45245/how-can-i-delete-all-files-from-a-directory-when-it-reports-argument-list-too-lo I have drwxr-xr-x 2 doreshkin doreshkin 198291456 Apr 6 21:35 session_data I tried find session_data -type f -delete find session_data -type f | xargs rm -f find session_data -maxdepth 1 -type f -print0 | xargs -r0 rm -f The result is the same: find: memory exhausted What can I do to remove this directory?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >