Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 150/303 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• On-board HDMI Audio

  - by TrackStar

  I have tried searching for answers to this issue but have had no luck. My HDMI display is working but I have no audio from the HDMI .There is no option for HDMI under sound preferences hardware or output. Purging and re-installing pulse audio doesn't change anything. I am using the on-board HDMI port on my motherboard, I do not have a PCI graphics card installed. CPU: i7-3770 Mobo: Asus Sabertooth z77 Kernel: 2.6.39-3-bb03 running aplay -l returns ** List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Seems as if the system doesn't even recognize the possibilty of HDMI audio output. Any ideas?

  Read the article

• ubuntu 10.10 maverick Zentyal . do anyone know where i can find its ? / download and install its ?

  - by santosamaru

  I want to installing Zentyal , do anyone know about the maverick version ? cause i got the news , that saying webmin is not available anymore and i have problem with its so that is why i try to change the webmin into Zentyal , but the problem is as i can find the version that they have is For Ubuntu 10.04 (Lucid) mine was ubuntu 10.10 maverick. i have problem with speed connections, that is why i need Zentyal so its will help me to build the squid to cache the webpage so its will help to make faster , lol, please your idea bout problem ,this, thanks.

  Read the article

• Ubuntu 12.10 will not boot!! please help

  - by Ishmael

  Okay ive been at this for about 6 hours now, linux has never given me problems before, im installing from an isodvd going from window7 to ubuntu12.10, the installation works fine, everything loads perfect with no problems and it asks me to restart when the installation is comeplete. After the computer shuts down and i remove the livecd as it tried to boot up i get an Error: no boot disk has been detected or the disk has failed. Ive tried updating grub from the livecd because it is the only way i can boot to anything atm, nothing has worked so far. Has anyone else had this problem??

  Read the article

• Comparing my version with the clean install

  - by Shomz

  I've been using and upgrading Ubuntu since the version 9. Of course, I have 13.04 now and after installing a clean 13.04 to another computer, I've noticed quite a few differences (plymouth, lightdm, some software behaves differently, etc.). I've done quite a few customizations during the period so it's probably due to that. So I wonder if there is a way to see what's different between my and the clean version. Not the complete file list diff, but perhaps software package differences (synaptic?) or something that will be easier to read and compare. Is there a way?

  Read the article

• Can't connect to wireless network in Lubuntu

  - by mike

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I ran it off a Live CD and it showed the network I want to connect to – but it just won't connect. I tried installing Lubuntu and during installation it also tried to connect to the same network and still nothing. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows.

  Read the article

• Is there any way to downgrade or revert an update to the kernel?

  - by David

  Today I installed the linux 3.9 Kernel update (because I heard it would fix sound through HDMI which I no longer have since installing 13.04). After restarted my computer and logging in my screen has only a desktop, and no dock or tool bar. I tried to reset unity and compiz using guides like this one but nothing happens, even after reboot. Is there any way to downgrade or reset the update? EDIT: Running uname -a in terminal brings up 3.8.0 as my current kernel for some reason.

  Read the article

• Swap File, Mount point, GRUB2

  - by Mike Green

  Windows 7 with 1gb RAM Hi. I am installing Ubuntu 12 onto a 20gb ext3 partition. I have 100gb free disk space. The install asked me to choose a swap space. Do I have to allocate another partition for the swap space, and if so, what size should it be? I installed without allocating a swap space. Can I allocate a swap space after the install? The install asked me for a mount point. I chose /. Is this okay? I also want to ensure that GRUB2 will be installed within the UBUNTU partition. Is there an option for this on the install? (I will use EasyBCD to select Windows7 or UBUNTU.) Thanks for your help, M...

  Read the article

• Are Intel HD 4000 graphics supported on Ubuntu 10.04 LTS?

  - by user1118764

  I have an intel Core i7-3700 system with Intel HD 4000 integrated graphics with a dual monitor setup (1 connected via VGA, the other via DVI) on Ubuntu 10.04 LTS 64bit. I'm trying to get my monitors correctly detected. Right now, in only 1 unknown monitor is detected with a max resolution of 1280x1024, which is lower than my main monitor connected to DVI. Also, the desktop is mirrored rather than extended. I've previously managed to get a Core i5-2400 system with Intel HD 3000 integrated graphics with the same dual monitor setup and Ubuntu 10.04 LTS 64bit to work using the glasen ppa drivers, but this time, after installing them following the instructions How do I install the Intel HD 3000 video driver? but it doesn't seem to work. Does the Intel HD 4000 require a different driver from the 3000? If so, where can I get it?

  Read the article

• Recently purchase a Linode server. Wondering how to keep track of modifications

  - by eveo

  I purchased a server for the sole purpose of familiarizing myself with the CLI so I don't get royally screwed when I enter a real development environment. However, I have some questions. I've managed to SSH into my server, all is fine and dandy, installed LAMP too which went flawlessly. Now I'm wondering, the more changes I do, the more cluttered my server will become. Can I revert changes? I don't want to keep customizing things and installing things and just having a cluttered server overall. Where can I track changes to my system?

  Read the article

• why the next button doesn't work in Joomla! 2.5.4 Installation [closed]

  - by rahul

  I was trying to insall the Joomla! 2.5.4 Installation. But I got stucked in the first step only. The button doesn't respond on clicks. I tried previous version like 1.5.26. But here also the process got hang after the 3rd step. In the 4th step the next button doesn't work as before. what to do, I am in dilemma. I am using XAMPP server for my localhost,please guide me, I lost complete one day in installing Joomla.

  Read the article

• How to correctly set permisions for all subfolders and files

  - by Saeid87

  I am following the guide to install TinyOS on Ubuntu 12.04 I have done up to step 3, But I am not sure if I have done the step 3 correctly. Because by doing the step 4 I get the permission error : saeid@saeid-Satellite-C660:~$ tos-install-jni /usr/bin/tos-install-jni: 13: [: =: unexpected operator Installing 32-bit Java JNI code in /usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386 ... install: cannot create regular file `/usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386/libgetenv.so': Permission denied Can you please tell me what would be the actual commands for step 3? What I have to replace with following lines?: /opt/tinyos-2.x files: chown -R /opt/tinyos-2.x Change the permissions on any serial (/dev/ttyS), usb (/dev/tts/usb, /dev/ttyUSB), or parallel (/dev/parport) devices you are going to use: chmod 666 /dev/ I mean how would you do those steps in your ubuntu?

  Read the article

• 12.04 LTS won't install from CD

  - by Rob Hays

  I've been trying to install 12.04 LTS onto a Dell with a PIII from CD. Booting from the CD the install gets through the "Who are you" process, begins copying files. The progress bar gets as far as the last period in "Copying files...". The box clears, and an error box comes up "The installer has encountered an unrecoverable error. A desktop session will now be run so that you may investigae the problem or try installing again." When I try to install from this desktop session, the install gets to the same point, the copying files box closes, and then just stops. The pointer is busy, the cd drive spins up occaisonally with no data transfer, no hard drive activity. When I boot from the CD and access the disk boot menu, the disk checks good, memory checks good ( I upgraded the original memory to 512 mb). I also updated the bios to the newest from Dell. This is an older L866r, but should meet the requirements.

  Read the article

• Can't install ubuntu 12.04 64 bit and 32 bit

  - by Mark

  I downloaded The Ubuntu 12.04 64 bit, i burned it from a cd and when I tried to install it i only and get a black screen and saying Peter Arvin et al could not find kermel image I thought there's a problem with the file so i downloaded it again and install it then i always get the same message. I tried also 32 bit and i always get the same error. I tried also installing it from a usb and i always get the same. So i just downloaded the WUBI and works so fine to my computer. I'm using Sony Vaio E Series with a 32 bit system and 500 GB hard Disk Drive.

  Read the article

• upgrading libglu1-mesa to its latest version

  - by Abderrahmane TAHRI JOUTI

  Yesterday I needed to install freeglut3, and ubuntu was saying that it needed libglu1-mesa=8.0.4-0ubuntu0.2 while 8.1~git1206081121.640409~gd~p was to be installed. So in order I did apt-get install --reinstall libglu1-mesa=8.0.4-0ubuntu0.2 and freeglut3 finally got installed. when I started ubuntu today, It got me onto Unity 2D. I got from that that what I did yesterday was not wise. Now compiz cannot start properly I suppose. I don't know if it is going to work, but if I install the version I had yesterday will it switch automatically ? Also, I do not know how to do it, installing the latest version of libglu1-mesa

  Read the article

• Monitor flickering ATI

  - by Atzu

  I'm using ubuntu 12.10 on laptop samsung with randeon hd 6620g (APU A8), when I run amdcccle -version it says 2.18, not sure if that's the correct version. My problem is that I have and external monitor, AOC e2343Fsk and when I finally got it working at the resolution I want 1920x1080 it works fine for like 5minutes and then it starts flickering... I solved this on Windows (the exact same problem) with some options (I don't remember very well) I believe there were some buttons '+' and '-' on some vsync option I played with them on windows and Yay! got it working, but I don't see anything similar on this catalyst version (I used xorg-edgers ppa for installing fglrx). Thanks.

  Read the article

• How do I save to an NTFS partition?

  - by RADHAKRISHNAN

  I was using ubuntu 11.04 on my Laptop. While installing it from a DVD, I have created a 10 GB NTFS partition at the beginning of the hard disk, as primary. All other partitions ( swap, a ext3, a ext4 and a FAT32 ) are created in as logical in the extended partition. All were working well in ubuntun11.04. Now the system was upgraded to ubuntu 11.10 via internet and was sucessful. But unable to either create folder/files or to write to existing files in the said NTFS partiton. But files in the partition can read - means mounting done. Same is the case even if logged in as root also. Fortunately no such problem with other partitions including FAT Why it is so, please help.

  Read the article

• Ubuntu 12.04 and Realtek Wireless Card Incompatible

  - by Tim

  Quick background: I installed Linux Ubuntu 12.04 on a Dell Inspiron 3520 after uninstalling Windows 8. A friend suggested to do this as opposed to buying a laptop with Linux pre-installed. Everything except the wireless card works. When I load up the laptop, I see a wireless animation as if it's trying to locate the wireless connection (for a while, then it goes blank), but no connections appear under the wireless option (under "Edit Connections" then "Wireless"). What I've tried: - Doing ndiswrapper. Failed. - Installing a few kernels for realtek. Failed.

  Read the article

• HP Pavilion G6 1209 temperature higher than usual and fan working in 11.10

  - by vanjadjurdjevic

  Installing Ubuntu on this new machine i had various problems, so I asked around ask ubuntu for a solution. This is the latest one! :D When I start the pc it shows the temperature around 50-55. When I open chromium it shows 60+ (61,62,63). It even gets to 67-68 when multi-tasking 2 apps. The fan is working slightly louder than in windows 7. Talking about windows 7, the temperature is 45-50 when idle, 50-53 when working in browser. Im already loosing it with this machine. You can find specs here It says 'technishe daten' below the picture. Click that tab and you will reach the specs.

  Read the article

• How do I add pcie_aspm=force to my boot options?

  - by nargo7

  I just upgraded to 11.10 from 11.04 on my laptop (I don't have Windows) by downloading from the Ubuntu website. The laptop battery is in bad condition, but I was using it with the 11.04 plugged to AC all the time, and everything was fine. After installing 11.10, the laptop seems to not notice that it is connected to AC, so it shuts down a few minutes after starting. I read that I have to type pcie_aspm=force in the boot command, so I tried accessing it by pressing the "F6" key while booting, and then the other F keys, but nothing happened. I also found that I can write that instruction in the terminal window, but I don't know in which file or location. I would appreciate some help, but I am not a computer engineer, so please write the instructions in plain English.

  Read the article

• How do I change the cursor and its size?

  - by Thomas Le Feuvre

  I have recently created an Ubuntu 12.04 partition on my Windows 7 laptop. When installing it, I switched to "high contrast" mode, which has rather large cursors (by large I mean about twice as large and thick as they should normally are). Now I have successfully installed the partition, the large cursors have stuck around even after exiting this high contrast mode, but only when I am hovering over stuff e.g. hovering over text inputs, links, and when resizing windows. All of these cursors are too large. They cursor is only normally sized when the computer should be displaying the normal mouse pointer. Does anyone know how I might go about fixing this?

  Read the article

• MacBook 5,1 - cant change brightness on 12.04

  - by RunnerUp

  I'm a total newbie to Ubuntu and recently decided to give it a go on my early 2009 Alu MacBook. For about a week now I've been trying to get the brightness controls to work. I've tried the following: Brightness controls doesn't work on a MacBook Pro 5.5 (ubuntu 12.04 LTS) https://help.ubuntu.com/community/MacBookPro5-5/Precise#LCD None of it seems to work. Next option was to try the Nvidia-bl-dkms drivers, but aftert installing the Mactel PPA I just get this: Reading package lists... DoneBuilding dependency tree Reading state information... Done E: Unable to locate package nvidia-bl-dkms Any help would be much appreciated as my eyes are going to fall out soon with the brightness maxed out.

  Read the article

• Distorted choppy audio in Precise

  - by Misery

  After installing Precise on my PC, some problems with soud occure. While using Lucid there were no problems. The sound is choppy and distorted in low tones range. As I absolutely have no experience in setting/testing and doing anything with Audo Devices I need help even to diagnose the problem. update: sudo lshw -c multimedia *-multimedia description: Audio device product: Radeon X1200 Series Audio Controller vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 5.2 bus info: pci@0000:01:05.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:19 memory:fdafc000-fdafffff *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff update 2: It has something to do with the volume. If the audio is quiet it is not choppy, if the sound is loud then it begins to be choppy. Regards, Misery

  Read the article

• The betas are coming &hellip; the betas are coming

  - by Enrique Lima

  Yep!  Another round of stuff to test out, I am referring to the Visual Studio 2010 SP1 related Betas. They are out, and available.  The always present warning that normally comes with installing Beta stuff is true here too. Scott Hanselman does a fantastic job on describing what is new, gains, fixes and such. The download links: Visual Studio 2010 SP1 Beta:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=11ea69cb-cf12-4842-a3d7-b32a1e5642e2&displaylang=en .NET 4.0 SP1 Beta : http://www.microsoft.com/downloads/en/details.aspx?FamilyID=6e3b7759-3df2-4755-8208-44955eee4d4c&displaylang=en TFS 2010 SP1 Beta:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d4f5a430-919b-46ee-bab6-ba804402df21&displaylang=en

  Read the article

• Are my other partitions safe from harm from an alpha/beta release?

  - by Marcappuccino

  I am quite intrested in testing the latest alpha-3 of Ubuntu, however, performance in VirtualBox is slow and somewhat buggy (I know! It's an Alpha) - guest additions wern't installing, bad mouse intergration, etc. I would now like to test this release on my hard drive. But my main system (12.04) is also on this very same hard drive. Is this safe? Can the alpha touch my main partition? Are there any other risks?

  Read the article

• Stuck at boot, both with wubi and USB

  - by Christoffer

  I have tried installing Ubuntu 12.04 through USB and with wubi interface. Nothing works. With USB, I will enter the main menu, doesn't matter what i choose, "install ubuntu on a hard drive" or "boot into ubuntu from USB". When I click on one of those it will scan my drives or something, and when it gets to the USB it gets stuck. It just stays there.... With wubi, the install goes fine, but when trying to boot for the first time to ubuntu it says "completing ubuntu installation"... NOTHING more happens, that cursor only blinks there. How can I get Ubuntu to work??? I got: 1TB HDD, 256GB HDD, 80GB SSD. I'm trying to install Ubuntu on my 256 GB HDD....

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >