Search Results

Search found 9847 results on 394 pages for 'cloud backup'.

Page 151/394 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • Extract Key and Certificate from Kemp Loadmaster?

    - by Matt Simmons
    I'm trying very hard to get away from a set of Kemp Loadmasters that I bought years ago to provide HA access to our website. Part of that process is going to be putting the key and certificate in the new solution (HAproxy with nginx doing SSL). Unfortunately, I've come up against a problem... The Kemp has built-in certificate management, and it generates CSR's at the touch of a button. It also supported importing of signed certificates, however it does not, so far as I can tell, allow any kind of export of the key itself. There is a "backup key and certificates" ability, however here's the text from the manual: LoadMaster supports exporting of ALL certificate information. This includes private key, host and intermediate certificates. The export file is designed to be used for import into another LoadMaster and is encrypted. Export and import can be completed using the WUI at Certificates -> Backup/Restore Certs. Please make sure to note the pass phrase used to create the export, it will be required to complete the import. You can selectively resort only Virtual Service certificates including private keys, intermediate certificates or both. Well, that is great, but as for actually DEALING with the certs, I'm apparently out of luck. Of course, I'm not going to give up that easily. I ran "file" on the saved cert bundle and got this: $ file client1.certs.backup client1.certs.backup: gzip compressed data, from Unix Well, awesome, I thought. Maybe it's just a .tar.gz, so I unzipped it, and that went fine, but my attempts to untar it didn't work, and running "file" on it now just gives this: $ file client1.certs.backup client1.certs.backup: data So that's where I'm stuck. Anyone have experience with these?

    Read the article

  • Changes to grub in ubuntu 10

    - by jdege
    I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

    Read the article

  • Backing up Excel Files to a different Directory

    - by Joe Taylor
    In Excel 2007 in the Save As box there is an option to 'Create a Backup' which simply backs up the file whenever it is saved. Unfortunately it backs up the file to the same directory as the original. Is there a simple way to change this directory to another drive / folder? I have messed about with macros to do this, coming up with: Private Sub Workbook_BeforeClose(Cancel As Boolean) 'Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean) 'Saves the current file to a backup folder and the default folder 'Note that any backup is overwritten Application.DisplayAlerts = False ActiveWorkbook.SaveCopyAs Filename:="T:\TEC_SERV\Backup file folder - DO NOT DELETE\" & _ ActiveWorkbook.Name ActiveWorkbook.Save Application.DisplayAlerts = True End Sub This creates a backup of the file ok the first time, however if this is tried again I get: Run-Time Error '1004'; Microsoft Office Excel cannot access the file 'T:\TEC_SERV\Backup file folder - DO NOT DELETE\Test Macro Sheet.xlsm. There are several possible reasons: The file name or path does not exist The file is being used by another program The workbook you are trying to save has the same name as a... I know the path is correct, I also know that the file is not open anywhere else. The workbook has the same name as the one I'm trying to save over but it should just overwrite. I have posted the question about the coding on Stack Overflow but wondered if there is an easier way to do this. Any help would be much appreciated. Joe

    Read the article

  • Hyper-V vss-writer not making current copies

    - by Martinnj
    I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

    Read the article

  • Hyper-V vss-writer not making current copies [migrated]

    - by Martinnj
    I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

    Read the article

  • What does a forward slash before a pipe in cmd do to remove the line ending of an echo?

    - by user66001
    This code: @echo off echo/|set /p ="Executing backup...." echo/|set /p =" backup procedure" ... came from Echoing in the same line and produces the below output in a cmd window: Executing backup....backup procedure However, I cant seem to find an explanation through google on what the forward slash does to the ¿pipe? to cause set's output to be echoed to the console / stdout If anyone could also suggest a good website for learning more about cmd / cmd programs' features like this, it would be appreciated.

    Read the article

  • could not bind socket while haproxy restart

    - by shreyas
    I m restarting HAproxy by following command haproxy -f /etc/haproxy/haproxy.cfg -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid) but i get following message [ALERT] 183/225022 (9278) : Starting proxy appli1-rewrite: cannot bind socket [ALERT] 183/225022 (9278) : Starting proxy appli2-insert: cannot bind socket [ALERT] 183/225022 (9278) : Starting proxy appli3-relais: cannot bind socket [ALERT] 183/225022 (9278) : Starting proxy appli4-backup: cannot bind socket [ALERT] 183/225022 (9278) : Starting proxy ssl-relay: cannot bind socket [ALERT] 183/225022 (9278) : Starting proxy appli5-backup: cannot bind socket my haproxy.cfg file looks likefollowing global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon #debug #quiet defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appli1-rewrite 0.0.0.0:10001 cookie SERVERID rewrite balance roundrobin server app1_1 192.168.34.23:8080 cookie app1inst1 check inter 2000 rise 2 fall 5 server app1_2 192.168.34.32:8080 cookie app1inst2 check inter 2000 rise 2 fall 5 server app1_3 192.168.34.27:8080 cookie app1inst3 check inter 2000 rise 2 fall 5 server app1_4 192.168.34.42:8080 cookie app1inst4 check inter 2000 rise 2 fall 5 listen appli2-insert 0.0.0.0:10002 option httpchk balance roundrobin cookie SERVERID insert indirect nocache server inst1 192.168.114.56:80 cookie server01 check inter 2000 fall 3 server inst2 192.168.114.56:81 cookie server02 check inter 2000 fall 3 capture cookie vgnvisitor= len 32 option httpclose # disable keep-alive rspidel ^Set-cookie:\ IP= # do not let this cookie tell our internal IP address listen appli3-relais 0.0.0.0:10003 dispatch 192.168.135.17:80 listen appli4-backup 0.0.0.0:10004 option httpchk /index.html option persist balance roundrobin server inst1 192.168.114.56:80 check inter 2000 fall 3 server inst2 192.168.114.56:81 check inter 2000 fall 3 backup listen ssl-relay 0.0.0.0:8443 option ssl-hello-chk balance source server inst1 192.168.110.56:443 check inter 2000 fall 3 server inst2 192.168.110.57:443 check inter 2000 fall 3 server back1 192.168.120.58:443 backup listen appli5-backup 0.0.0.0:10005 option httpchk * balance roundrobin cookie SERVERID insert indirect nocache server inst1 192.168.114.56:80 cookie server01 check inter 2000 fall 3 server inst2 192.168.114.56:81 cookie server02 check inter 2000 fall 3 server inst3 192.168.114.57:80 backup check inter 2000 fall 3 capture cookie ASPSESSION len 32 srvtimeout 20000 option httpclose # disable keep-alive option checkcache # block response if set-cookie & cacheable rspidel ^Set-cookie:\ IP= # do not let this cookie tell our internal IP address #errorloc 502 http://192.168.114.58/error502.html #errorfile 503 /etc/haproxy/errors/503.http errorfile 400 /etc/haproxy/errors/400.http errorfile 403 /etc/haproxy/errors/403.http errorfile 408 /etc/haproxy/errors/408.http errorfile 500 /etc/haproxy/errors/500.http errorfile 502 /etc/haproxy/errors/502.http errorfile 503 /etc/haproxy/errors/503.http errorfile 504 /etc/haproxy/errors/504.http what is wrong with my aproach

    Read the article

  • How to INF mod: Replacing 32bit dlls with 64bits

    - by Nime Cloud
    I've got a driver setup for 32 bit: An INF file and an x86 folder with two 32 bit dlls. I need to replace these 32 bit dll files with 64 bit ones. I just simply overwrite 32 bit files but no lock. How can I make 64 bit version of the driver? Update: I tried original setup files on 32 bit Windows XP, setup asks for WdfCoinstaller01009.dll, I just simply browse & point the file from somewhere on XP. ;-------------- WDF Coinstaller installation [DestinationDirs] CoInstaller_CopyFiles = 11 [silabser.Dev.NT.CoInstallers] AddReg=CoInstaller_AddReg CopyFiles=CoInstaller_CopyFiles [CoInstaller_CopyFiles] WdfCoinstaller01009.dll [SourceDisksFiles] WdfCoinstaller01009.dll=1 [CoInstaller_AddReg] HKR,,CoInstallers32,0x00010000, "WdfCoinstaller01009.dll,WdfCoInstaller" [silabser.Dev.NT.Wdf] KmdfService = silabser, silabser_wdfsect [silabser_wdfsect] KmdfLibraryVersion = 1.9

    Read the article

  • Are these symptoms of a video card is dying?

    - by K Cloud
    What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

    Read the article

  • How to download Google Cloud Messaging (GCM) from Google Code?

    - by Dennis
    I'm trying to learn how to use GCM and I want download the simple app. I'm following the instructions here: http://developer.android.com/google/gcm/server.html. Using App Engine for Java To set up the server using a standard App Engine for Java: Get the files from the open source site, as described above. I entered the link - https://code.google.com/p/gcm/ but there is no download there, and I don't have Git (and I don't know how to use it..). Can someone please explain how to download it or give me a link or something? Thank you in advance!

    Read the article

  • Accidentally deleted /opt/local/bin without backup. Any help?

    - by Aaron
    Hi all, I'm on a Mac OS X 10.5.8 I was recently uninstalling mysql5 from /opt/local/bin. I typed: rm -rf /opt/local/bin mysql* instead of rm -rf /opt/local/bin/mysql* This deleted my entire /opt/local/bin directory which puts me in a bit of a bind. Is there any way to recover these files? If not, I have a friend that is using a similar set of programs, would it be possible to use the contents of his folder? If I end up needing to re-install everything in this folder, what is the best way to go about doing this? Thanks in advance!

    Read the article

  • Azure - Part 4 - Table Storage Service in Windows Azure

    - by Shaun
    In Windows Azure platform there are 3 storage we can use to save our data on the cloud. They are the Table, Blob and Queue. Before the Chinese New Year Microsoft announced that Azure SDK 1.1 had been released and it supports a new type of storage – Drive, which allows us to operate NTFS files on the cloud. I will cover it in the coming few posts but now I would like to talk a bit about the Table Storage.   Concept of Table Storage Service The most common development scenario is to retrieve, create, update and remove data from the data storage. In the normal way we communicate with database. When we attempt to move our application over to the cloud the most common requirement should be have a storage service. Windows Azure provides a in-build service that allow us to storage the structured data, which is called Windows Azure Table Storage Service. The data stored in the table service are like the collection of entities. And the entities are similar to rows or records in the tradtional database. An entity should had a partition key, a row key, a timestamp and set of properties. You can treat the partition key as a group name, the row key as a primary key and the timestamp as the identifer for solving the concurrency problem. Different with a table in a database, the table service does not enforce the schema for tables, which means you can have 2 entities in the same table with different property sets. The partition key is being used for the load balance of the Azure OS and the group entity transaction. As you know in the cloud you will never know which machine is hosting your application and your data. It could be moving based on the transaction weight and the number of the requests. If the Azure OS found that there are many requests connect to your Book entities with the partition key equals “Novel” it will move them to another idle machine to increase the performance. So when choosing the partition key for your entities you need to make sure they indecate the category or gourp information so that the Azure OS can perform the load balance as you wish.   Consuming the Table Although the table service looks like a database, you cannot access it through the way you are using now, neither ADO.NET nor ODBC. The table service exposed itself by ADO.NET Data Service protocol, which allows you can consume it through the RESTful style by Http requests. The Azure SDK provides a sets of classes for us to connect it. There are 2 classes we might need: TableServiceContext and TableServiceEntity. The TableServiceContext inherited from the DataServiceContext, which represents the runtime context of the ADO.NET data service. It provides 4 methods mainly used by us: CreateQuery: It will create a IQueryable instance from a given type of entity. AddObject: Add the specified entity into Table Service. UpdateObject: Update an existing entity in the Table Service. DeleteObject: Delete an entity from the Table Service. Beofre you operate the table service you need to provide the valid account information. It’s something like the connect string of the database but with your account name and the account key when you created the storage service on the Windows Azure Development Portal. After getting the CloudStorageAccount you can create the CloudTableClient instance which provides a set of methods for using the table service. A very useful method would be CreateTableIfNotExist. It will create the table container for you if it’s not exsited. And then you can operate the eneities to that table through the methods I mentioned above. Let me explain a bit more through an exmaple. We always like code rather than sentence.   Straightforward Accessing to the Table Here I would like to build a WCF service on the Windows Azure platform, and for now just one requirement: it would allow the client to create an account entity on the table service. The WCF service would have a method named Register and accept an instance of the account which the client wants to create. After perform some validation it will add the entity into the table service. So the first thing I should do is to create a Cloud Application on my VIstial Studio 2010 RC. (The Azure SDK 1.1 only supports VS2008 and VS2010 RC.) The solution should be like this below. Then I added a configuration items for the storage account through the Settings section under the cloud project. (Double click the Services file under Roles folder and navigate to the Setting section.) This setting will be used when to retrieve my storage account information. Since for now I just in the development phase I will select “UseDevelopmentStorage=true”. And then I navigated to the WebRole.cs file under my WCF project. If you have read my previous posts you would know that this file defines the process when the application start, and terminate on the cloud. What I need to do is to when the application start, set the configuration publisher to load my config file with the config name I specified. So the code would be like below. I removed the original service and contract created by the VS template and add my IAccountService contract and its implementation class - AccountService. And I add the service method Register with the parameters: email, password and it will return a boolean value to indicates the result which is very simple. At this moment if I press F5 the application will be established on my local development fabric and I can see my service runs well through the browser. Let’s implement the service method Rigister, add a new entity to the table service. As I said before the entities you want to store in the table service must have 3 properties: partition key, row key and timespan. You can create a class with these 3 properties. The Azure SDK provides us a base class for that named TableServiceEntity in Microsoft.WindowsAzure.StorageClient namespace. So what we need to do is more simply, create a class named Account and let it derived from the TableServiceEntity. And I need to add my own properties: Email, Password, DateCreated and DateDeleted. The DateDeleted is a nullable date time value to indecate whether this entity had been deleted and when. Do you notice that I missed something here? Yes it’s the partition key and row key I didn’t assigned. The TableServiceEntity base class defined 2 constructors one was a parameter-less constructor which will be used to fill values into the properties from the table service when retrieving data. The other was one with 2 parameters: partition key and row key. As I said below the partition key may affect the load balance and the row key must be unique so here I would like to use the email as the parition key and the email plus a Guid as the row key. OK now we finished the entity class we need to store onto the table service. The next step is to create a data access class for us to add it. Azure SDK gives us a base class for it named TableServiceContext as I mentioned below. So let’s create a class for operate the Account entities. The TableServiceContext need the storage account information for its constructor. It’s the combination of the storage service URI that we will create on Windows Azure platform, and the relevant account name and key. The TableServiceContext will use this information to find the related address and verify the account to operate the storage entities. Hence in my AccountDataContext class I need to override this constructor and pass the storage account into it. All entities will be saved in the table storage with one or many tables which we call them “table containers”. Before we operate an entity we need to make sure that the table container had been created on the storage. There’s a method we can use for that: CloudTableClient.CreateTableIfNotExist. So in the constructor I will perform it firstly to make sure all method will be invoked after the table had been created. Notice that I passed the storage account enpoint URI and the credentials to specify where my storage is located and who am I. Another advise is that, make your entity class name as the same as the table name when create the table. It will increase the performance when you operate it over the cloud especially querying. Since the Register WCF method will add a new account into the table service, here I will create a relevant method to add the account entity. Before implement, I should add a reference - System.Data.Services.Client to the project. This reference provides some common method within the ADO.NET Data Service which can be used in the Windows Azure Table Service. I will use its AddObject method to create my account entity. Since the table service are not fully implemented the ADO.NET Data Service, there are some methods in the System.Data.Services.Client that TableServiceContext doesn’t support, such as AddLinks, etc. Then I implemented the serivce method to add the account entity through the AccountDataContext. You can see in the service implmentation I load the storage account information through my configuration file and created the account table entity from the parameters. Then I created the AccountDataContext. If it’s my first time to invoke this method the constructor of the AccountDataContext will create a table container for me. Then I use Add method to add the account entity into the table. Next, let’s create a farely simple client application to test this service. I created a windows console application and added a service reference to my WCF service. The metadata information of the WCF service cannot be retrieved if it’s deployed on the Windows Azure even though the <serviceMetadata httpGetEnabled="true"/> had been set. If we need to get its metadata we can deploy it on the local development service and then changed the endpoint to the address which is on the cloud. In the client side app.config file I specified the endpoint to the local development fabric address. And the just implement the client to let me input an email and a password then invoke the WCF service to add my acocunt. Let’s run my application and see the result. Of course it should return TRUE to me. And in the local SQL Express I can see the data had been saved in the table.   Summary In this post I explained more about the Windows Azure Table Storage Service. I also created a small application for demostration of how to connect and consume it through the ADO.NET Data Service Managed Library provided within the Azure SDK. I only show how to create an eneity in the storage service. In the next post I would like to explain about how to query the entities with conditions thruogh LINQ. I also would like to refactor my AccountDataContext class to make it dyamic for any kinds of entities.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • CodePlex Daily Summary for Friday, April 23, 2010

    CodePlex Daily Summary for Friday, April 23, 2010New Projects3D TagCloud for SharePoint 2010: 3D Flash TagCloud WebPart for SharePoint 2010AnyCAD.Net: AnyCAD.NetCassandraemon: Cassandraemon is LINQ Provider for Apache Cassandra.CCLI SongSelect Importer for PowerPoint: CCLI SongSelect Importer for PowerPoint ® is an Add-in for Microsoft ® PowerPoint ® that allows CCLI SongSelect (USR) files to be turned into slide...Compactar Arquivo Txt, Flat File, em Pipeline Decoder Customizado: Objetivo do projeto: Desenvolver um componente do tipo Pipeline Receiver Decoder, onde compacta o conteúdo, cria uma mensagem em XML e transforma ...Console Calculator: Console calculator is a simple, yet useful, mathematical expression calculator, supporting functions and variables. It was created to demonstrate ...CRM Dynamics Excel Importer: CRM Dynamics Excel Importercubace: The standard audio composer software with just single difference: this is CLR compilation.deneb: deneb projectDrive Backup: Drive Backup is an easy to use, automatic backup program. Simply insert a USB drive, and the program will backup either files on the drive to your ...eWebMVCCMS: this is the start of eWeb MVC CMS.Fix.ly: Small app that allows for URL rewriting before passing to the browser. Accepts MEF plugins that make themselves available by informing the applicat...GArphics: GArphics uses a genetic algorithm to produce graphics and animation with the assitance of the user.JDS Toolkit: An experimental toolkit geared to make richer applications with less effort. It will include controls such as the cubeoid and the serializedmenu. ...KrashSRC - MapleStory v.75 Emulator: KrashSRC - MapleStory v.75 EmulatorLast.fm Api: Last.fm api writen in Visaul Basic 2010.MIX 10 DVR and Downloader: A Silverlight application that will manage downloading the sessions and slide decks from the MIX '10 Conference utilizing the MIX OData feed for in...NSIS Autorun: This is a graphical CD/DVD/USB autorun engine that launches installers made with NSIS. Non-rectangular windows and animation are supported. Can be ...Pillbox: Windows Phone 7 sample application for tracking medications.PowerSharp: Very simple application that executes a snippet of PowerShell against C#. This will eventually be used with Live@EDU.Project Halosis: mmorpgProyecto Cero: Proyecto CeroSharePoint XSL Templates: This project is a place to share useful XSL templates that can be reused in SharePoint CQWPs and DVWPs.Silverlight 4.0 Popup Menu: Silverlight 4.0 Popup Menu spsearch: This project provides useful enhancements to Search using the SharePoint platform.StereoVision: StereVision es un proyecto que estudia un algoritmo de visión estereocopicaThe Stoffenmanager: The Stoffenmanager is a tool for prioritizing worker health risks to dangerous substances. But also a quantitative inhalation exposure tool and a ...Transcriber: Transcribe text from one character set to another. Extensible, plug-in based architecture. Default plug-in uses XML rules files with regular expres...Wavelets experiments: эксперименты с вейвлетамиWindows Phone 7 World of Warcraft Armory Browser: A test project to learn a little about Windows Phone development and do a decent armory browserXAML Based Chat: Xaml based chat. A simple chat systemNew Releases#Nose: SharpNose v1.1: Configuration is now done by updating SharpNose.exe.config MEF support added - you can also add your favorite test framework discovery Two tes...Baml Localizer: Version 0.1 (alpha): This is the first release which should show the capabilities of Baml Localizer. The code might still change a lot, but the file formats should be q...BibWord : Microsoft Word Citation and Bibliography styles: APA with DOI - Proof of Concept: IntroductionThis release is a proof of concept (POC) demonstrating a possible way of adding a digital object identifier (DOI) field to the APA styl...Chargify.NET: Chargify.NET v0.685: Releasing Version 0.685 - Changed customer reference ID from Guid to String for systems that don't use Guid as the unique key. - Added method for g...Compactar Arquivo Txt, Flat File, em Pipeline Decoder Customizado: SampleZipDecodePipeline: Solution contem Projeto com o Decoder Pipeline. Projeto para usar o Componente. Classes SharpZipLib para compactar e descompactar arquivosConsole Calculator: Console Calculator: Initial source code release.CSharp Intellisense: V1.6: UPDATE: 2010/04/05: description was added 2010/04/07: single selection + reset filter 20010/04/15: source code available at http://csharpintellis...Drive Backup: Drive Backup: Drive Backup allows you to automatically backup a USB device to your computer, or backup files/directories on your computer to a USB. Once you have...Event Scavenger: Thread recycling changes - Version 3.1: Change the location of where the settings for thread recycling is stored - Moved from config file to database for easier management. Version of dat...Extend SmallBasic: Teaching Extensions v.013: Added Houses QuizExtend SmallBasic: Teaching Extensions v.014: fixed a bug in Tortoise.approve rearranged the Houses Quiz to be more funFix.ly: Fix.ly 0.1: Initial test releaseFix.ly: Fix.ly 0.11: Fixed a couple bugs, including missing files in the previous releaseGArphics: Beta: This is the beta-version of the program. Version 1.0 shall be relased soon and will include a lot of improvements.HouseFly: HouseFly alpha 0.2.0.5: HouseFly alpha release 0.2.0.5HouseFly controls: HouseFly controls alpha 0.9.4: Version 0.9.4 alpha release of HouseFly controlsHTML Ruby: 6.21.8: Change Math.floor to round for text spacingHTML Shot: 0.1: Solved problems with some URLsJDS Toolkit: JDS Toolkit 0.1: Beta 0.1 version. Almost nothing in these librariesManaged Extensibility Framework: WebForms and MEF Sample: This sample demonstrates the use of these two technologies together in a non-invasive way. Information on how to use it on your own projects is inc...Microsoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V0.7 - N-Layer DDD Sample App (VS.2010 RTM compat): Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Unity Applic...MvcContrib Portable Areas: Portable Areas: First Release of some portable areasNSIS Autorun: NSIS Autorun: Initial release.OgmoXNA: OgmoXNA Alpha Source Tree: Zipped version of the source tree in case you don't want to go through the SVN!Particle Plot Pivot: Particle Plot Pivot v1.0.0: Generates a Pivot collection of unpublished plots from the particle physics exeriments DZERO, CDF, ATLAS, and CMS. It can be found at http://deepta...patterns & practices SharePoint Guidance: SPG2010 Drop9: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...Rich Ajax empowered Web/Cloud Applications: 6.3.15: New Visual WebGui rich applications platform versionSilverlight 4.0 Popup Menu: PopupMenu for Silverlight 4: This is the first release of the popup menu class for Silverlight 4.0Silverlight Flow Layouts library: SL and WPF Flow Layouts library April 2010: This release introduces WPF 4.0 RTM and Silverlight 4 RTM support, as well as an additional layout algorithm and some minor bug fixes. Some changes...Spackle.NET: 3.0.0.0 Release: In this release: Spackle.dll now targets the 4.0 version of the .NET Framework SecureRandom implements IDisposable ActionExtensions have been ...Splinger FrameXi: Splinger 1.1: Welcome to a whole new way of learning! Go to release 1.0 for the non .zip packaged files.SQL Server Metadata Toolkit 2008: SQL Server Metadata Toolkit Alpha 6: This release addresses issues 10665, 10678 and 10679. The SQL Parser now understands CAST functions (the AS was causing issues), and is installed ...Star Trooper for XNA 2D Tutorial: Lesson four content: Here is Lesson four original content for the StarTrooper 2D XNA tutorial. It also includes the XNA version of Lesson four source. The blog tutori...Thales Simulator Library: Version 0.8.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptogra...Transcriber: Transcriber v0.1: Initial alpha release. Very nearly useful. :-) This version includes rules files for Mode of Beleriand, Sindarin Tehtar, Quenya, and Black Speech. ...Visual Studio DSite: Picture Box Viewer (Visual F sharp 2008): A simple picturebox viewer made in visual f sharp 2008.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 Beta 2d: Further stabilization of the cutting-edge web applications frameworkWebAssert: WebAssert 0.1: Initial release. Supports HTML & CSS validation using MSTest/Visual Studio testing.XAML Based Chat: Test release: A test releaseすとれおじさん(仮): すとれおじさん β 0.02: ・デザインを大幅に変更 ・まだかなり動作が重いです ・機能も少ないですMost Popular ProjectsRawrWBFS ManagerSilverlight ToolkitAJAX Control ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrParticle Plot PivotBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineDotNetZip LibraryFluent Ribbon Control SuiteN2 CMS

    Read the article

  • Meet the New Windows Azure

    - by ScottGu
    Today we are releasing a major set of improvements to Windows Azure.  Below is a short-summary of just a few of them: New Admin Portal and Command Line Tools Today’s release comes with a new Windows Azure portal that will enable you to manage all features and services offered on Windows Azure in a seamless, integrated way.  It is very fast and fluid, supports filtering and sorting (making it much easier to use for large deployments), works on all browsers, and offers a lot of great new features – including built-in VM, Web site, Storage, and Cloud Service monitoring support. The new portal is built on top of a REST-based management API within Windows Azure – and everything you can do through the portal can also be programmed directly against this Web API. We are also today releasing command-line tools (which like the portal call the REST Management APIs) to make it even easier to script and automate your administration tasks.  We are offering both a Powershell (for Windows) and Bash (for Mac and Linux) set of tools to download.  Like our SDKs, the code for these tools is hosted on GitHub under an Apache 2 license. Virtual Machines Windows Azure now supports the ability to deploy and run durable VMs in the cloud.  You can easily create these VMs using a new Image Gallery built-into the new Windows Azure Portal, or alternatively upload and run your own custom-built VHD images. Virtual Machines are durable (meaning anything you install within them persists across reboots) and you can use any OS with them.  Our built-in image gallery includes both Windows Server images (including the new Windows Server 2012 RC) as well as Linux images (including Ubuntu, CentOS, and SUSE distributions).  Once you create a VM instance you can easily Terminal Server or SSH into it in order to configure and customize the VM however you want (and optionally capture your own image snapshot of it to use when creating new VM instances).  This provides you with the flexibility to run pretty much any workload within Windows Azure.   The new Windows Azure Portal provides a rich set of management features for Virtual Machines – including the ability to monitor and track resource utilization within them.  Our new Virtual Machine support also enables the ability to easily attach multiple data-disks to VMs (which you can then mount and format as drives).  You can optionally enable geo-replication support on these – which will cause Windows Azure to continuously replicate your storage to a secondary data-center at least 400 miles away from your primary data-center as a backup. We use the same VHD format that is supported with Windows virtualization today (and which we’ve released as an open spec), which enables you to easily migrate existing workloads you might already have virtualized into Windows Azure.  We also make it easy to download VHDs from Windows Azure, which also provides the flexibility to easily migrate cloud-based VM workloads to an on-premise environment.  All you need to do is download the VHD file and boot it up locally, no import/export steps required. Web Sites Windows Azure now supports the ability to quickly and easily deploy ASP.NET, Node.js and PHP web-sites to a highly scalable cloud environment that allows you to start small (and for free) and then scale up as your traffic grows.  You can create a new web site in Azure and have it ready to deploy to in under 10 seconds: The new Windows Azure Portal provides built-in administration support for Web sites – including the ability to monitor and track resource utilization in real-time: You can deploy to web-sites in seconds using FTP, Git, TFS and Web Deploy.  We are also releasing tooling updates today for both Visual Studio and Web Matrix that enable developers to seamlessly deploy ASP.NET applications to this new offering.  The VS and Web Matrix publishing support includes the ability to deploy SQL databases as part of web site deployment – as well as the ability to incrementally update database schema with a later deployment. You can integrate web application publishing with source control by selecting the “Set up TFS publishing” or “Set up Git publishing” links on a web-site’s dashboard: Doing do will enable integration with our new TFS online service (which enables a full TFS workflow – including elastic build and testing support), or create a Git repository that you can reference as a remote and push deployments to.  Once you push a deployment using TFS or Git, the deployments tab will keep track of the deployments you make, and enable you to select an older (or newer) deployment and quickly redeploy your site to that snapshot of the code.  This provides a very powerful DevOps workflow experience.   Windows Azure now allows you to deploy up to 10 web-sites into a free, shared/multi-tenant hosting environment (where a site you deploy will be one of multiple sites running on a shared set of server resources).  This provides an easy way to get started on projects at no cost. You can then optionally upgrade your sites to run in a “reserved mode” that isolates them so that you are the only customer within a virtual machine: And you can elastically scale the amount of resources your sites use – allowing you to increase your reserved instance capacity as your traffic scales: Windows Azure automatically handles load balancing traffic across VM instances, and you get the same, super fast, deployment options (FTP, Git, TFS and Web Deploy) regardless of how many reserved instances you use. With Windows Azure you pay for compute capacity on a per-hour basis – which allows you to scale up and down your resources to match only what you need. Cloud Services and Distributed Caching Windows Azure also supports the ability to build cloud services that support rich multi-tier architectures, automated application management, and scale to extremely large deployments.  Previously we referred to this capability as “hosted services” – with this week’s release we are now referring to this capability as “cloud services”.  We are also enabling a bunch of new features with them. Distributed Cache One of the really cool new features being enabled with cloud services is a new distributed cache capability that enables you to use and setup a low-latency, in-memory distributed cache within your applications.  This cache is isolated for use just by your applications, and does not have any throttling limits. This cache can dynamically grow and shrink elastically (without you have to redeploy your app or make code changes), and supports the full richness of the AppFabric Cache Server API (including regions, high availability, notifications, local cache and more).  In addition to supporting the AppFabric Cache Server API, it also now supports the Memcached protocol – allowing you to point code written against Memcached at it (no code changes required). The new distributed cache can be setup to run in one of two ways: 1) Using a co-located approach.  In this option you allocate a percentage of memory in your existing web and worker roles to be used by the cache, and then the cache joins the memory into one large distributed cache.  Any data put into the cache by one role instance can be accessed by other role instances in your application – regardless of whether the cached data is stored on it or another role.  The big benefit with the “co-located” option is that it is free (you don’t have to pay anything to enable it) and it allows you to use what might have been otherwise unused memory within your application VMs. 2) Alternatively, you can add “cache worker roles” to your cloud service that are used solely for caching.  These will also be joined into one large distributed cache ring that other roles within your application can access.  You can use these roles to cache 10s or 100s of GBs of data in-memory very effectively – and the cache can be elastically increased or decreased at runtime within your application: New SDKs and Tooling Support We have updated all of the Windows Azure SDKs with today’s release to include new features and capabilities.  Our SDKs are now available for multiple languages, and all of the source in them is published under an Apache 2 license and and maintained in GitHub repositories. The .NET SDK for Azure has in particular seen a bunch of great improvements with today’s release, and now includes tooling support for both VS 2010 and the VS 2012 RC. We are also now shipping Windows, Mac and Linux SDK downloads for languages that are offered on all of these systems – allowing developers to develop Windows Azure applications using any development operating system. Much, Much More The above is just a short list of some of the improvements that are shipping in either preview or final form today – there is a LOT more in today’s release.  These include new Virtual Private Networking capabilities, new Service Bus runtime and tooling support, the public preview of the new Azure Media Services, new Data Centers, significantly upgraded network and storage hardware, SQL Reporting Services, new Identity features, support within 40+ new countries and territories, and much, much more. You can learn more about Windows Azure and sign-up to try it for free at http://windowsazure.com.  You can also watch a live keynote I’m giving at 1pm June 7th (later today) where I’ll walk through all of the new features.  We will be opening up the new features I discussed above for public usage a few hours after the keynote concludes.  We are really excited to see the great applications you build with them. Hope this helps, Scott

    Read the article

  • Chock-full of Identity Customers at Oracle OpenWorld

    - by Tanu Sood
      Oracle Openworld (OOW) 2012 kicks off this coming Sunday. Oracle OpenWorld is known to bring in Oracle customers, organizations big and small, from all over the world. And, Identity Management is no exception. If you are looking to catch up with Oracle Identity Management customers, hear first-hand about their implementation experiences and discuss industry trends, business drivers, solutions and more at OOW, here are some sessions we recommend you attend: Monday, October 1, 2012 CON9405: Trends in Identity Management 10:45 a.m. – 11:45 a.m., Moscone West 3003 Subject matter experts from Kaiser Permanente and SuperValu share the stage with Amit Jasuja, Snior Vice President, Oracle Identity Management and Security to discuss how the latest advances in Identity Management are helping customers address emerging requirements for securely enabling cloud, social and mobile environments. CON9492: Simplifying your Identity Management Implementation 3:15 p.m. – 4:15 p.m., Moscone West 3008 Implementation experts from British Telecom, Kaiser Permanente and UPMC participate in a panel to discuss best practices, key strategies and lessons learned based on their own experiences. Attendees will hear first-hand what they can do to streamline and simplify their identity management implementation framework for a quick return-on-investment and maximum efficiency. CON9444: Modernized and Complete Access Management 4:45 p.m. – 5:45 p.m., Moscone West 3008 We have come a long way from the days of web single sign-on addressing the core business requirements. Today, as technology and business evolves, organizations are seeking new capabilities like federation, token services, fine grained authorizations, web fraud prevention and strong authentication. This session will explore the emerging requirements for access management, what a complete solution is like, complemented with real-world customer case studies from ETS, Kaiser Permanente and TURKCELL and product demonstrations. Tuesday, October 2, 2012 CON9437: Mobile Access Management 10:15 a.m. – 11:15 a.m., Moscone West 3022 With more than 5 billion mobile devices on the planet and an increasing number of users using their own devices to access corporate data and applications, securely extending identity management to mobile devices has become a hot topic. This session will feature Identity Management evangelists from companies like Intuit, NetApp and Toyota to discuss how to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. CON9491: Enhancing the End-User Experience with Oracle Identity Governance applications 11:45 a.m. – 12:45 p.m., Moscone West 3008 As organizations seek to encourage more and more user self service, business users are now primary end users for identity management installations.  Join experts from Visa and Oracle as they explore how Oracle Identity Governance solutions deliver complete identity administration and governance solutions with support for emerging requirements like cloud identities and mobile devices. CON9447: Enabling Access for Hundreds of Millions of Users 1:15 p.m. – 2:15 p.m., Moscone West 3008 Dealing with scale problems? Looking to address identity management requirements with million or so users in mind? Then take note of Cisco’s implementation. Join this session to hear first-hand how Cisco tackled identity management and scaled their implementation to bolster security and enforce compliance. CON9465: Next Generation Directory – Oracle Unified Directory 5:00 p.m. – 6:00 p.m., Moscone West 3008 Get the 360 degrees perspective from a solution provider, implementation services partner and the customer in this session to learn how the latest Oracle Unified Directory solutions can help you build a directory infrastructure that is optimized to support cloud, mobile and social networking and yet deliver on scale and performance. Wednesday, October 3, 2012 CON9494: Sun2Oracle: Identity Management Platform Transformation 11:45 a.m. – 12:45 p.m., Moscone West 3008 Sun customers are actively defining strategies for how they will modernize their identity deployments. Learn how customers like Avea and SuperValu are leveraging their Sun investment, evaluating areas of expansion/improvement and building momentum. CON9631: Entitlement-centric Access to SOA and Cloud Services 11:45 a.m. – 12:45 p.m., Marriott Marquis, Salon 7 How do you enforce that a junior trader can submit 10 trades/day, with a total value of $5M, if market volatility is low? How can hide sensitive patient information from clerical workers but make it visible to specialists as long as consent has been given or there is an emergency? How do you externalize such entitlements to allow dynamic changes without having to touch the application code? In this session, Uberether and HerbaLife take the stage with Oracle to demonstrate how you can enforce such entitlements on a service not just within your intranet but also right at the perimeter. CON3957 - Delivering Secure Wi-Fi on the Tube as an Olympics Legacy from London 2012 11:45 a.m. – 12:45 p.m., Moscone West 3003 In this session, Virgin Media, the U.K.’s first combined provider of broadband, TV, mobile, and home phone services, shares how it is providing free secure Wi-Fi services to the London Underground, using Oracle Virtual Directory and Oracle Entitlements Server, leveraging back-end legacy systems that were never designed to be externalized. As an Olympics 2012 legacy, the Oracle architecture will form a platform to be consumed by other Virgin Media services such as video on demand. CON9493: Identity Management and the Cloud 1:15 p.m. – 2:15 p.m., Moscone West 3008 Security is the number one barrier to cloud service adoption.  Not so for industry leading companies like SaskTel, ConAgra foods and UPMC. This session will explore how these organizations are using Oracle Identity with cloud services and how some are offering identity management as a cloud service. CON9624: Real-Time External Authorization for Middleware, Applications, and Databases 3:30 p.m. – 4:30 p.m., Moscone West 3008 As organizations seek to grant access to broader and more diverse user populations, the importance of centrally defined and applied authorization policies become critical; both to identify who has access to what and to improve the end user experience.  This session will explore how customers are using attribute and role-based access to achieve these goals. CON9625: Taking control of WebCenter Security 5:00 p.m. – 6:00 p.m., Moscone West 3008 Many organizations are extending WebCenter in a business to business scenario requiring secure identification and authorization of business partners and their users. Leveraging LADWP’s use case, this session will focus on how customers are leveraging, securing and providing access control to Oracle WebCenter portal and mobile solutions. Thursday, October 4, 2012 CON9662: Securing Oracle Applications with the Oracle Enterprise Identity Management Platform 2:15 p.m. – 3:15 p.m., Moscone West 3008 Oracle Enterprise identity Management solutions are designed to secure access and simplify compliance to Oracle Applications.  Whether you are an EBS customer looking to upgrade from Oracle Single Sign-on or a Fusion Application customer seeking to leverage the Identity instance as an enterprise security platform, this session with Qualcomm and Oracle will help you understand how to get the most out of your investment. And here’s the complete listing of all the Identity Management sessions at Oracle OpenWorld.

    Read the article

  • SQL SERVER – Extending SQL Azure with Azure worker role – Guest Post by Paras Doshi

    - by pinaldave
    This is guest post by Paras Doshi. Paras Doshi is a research Intern at SolidQ.com and a Microsoft student partner. He is currently working in the domain of SQL Azure. SQL Azure is nothing but a SQL server in the cloud. SQL Azure provides benefits such as on demand rapid provisioning, cost-effective scalability, high availability and reduced management overhead. To see an introduction on SQL Azure, check out the post by Pinal here In this article, we are going to discuss how to extend SQL Azure with the Azure worker role. In other words, we will attempt to write a custom code and host it in the Azure worker role; the aim is to add some features that are not available with SQL Azure currently or features that need to be customized for flexibility. This way we extend the SQL Azure capability by building some solutions that run on Azure as worker roles. To understand Azure worker role, think of it as a windows service in cloud. Azure worker role can perform background processes, and to handle processes such as synchronization and backup, it becomes our ideal tool. First, we will focus on writing a worker role code that synchronizes SQL Azure databases. Before we do so, let’s see some scenarios in which synchronization between SQL Azure databases is beneficial: scaling out access over multiple databases enables us to handle workload efficiently As of now, SQL Azure database can be hosted in one of any six datacenters. By synchronizing databases located in different data centers, one can extend the data by enabling access to geographically distributed data Let us see some scenarios in which SQL server to SQL Azure database synchronization is beneficial To backup SQL Azure database on local infrastructure Rather than investing in local infrastructure for increased workloads, such workloads could be handled by cloud Ability to extend data to different datacenters located across the world to enable efficient data access from remote locations Now, let us develop cloud-based app that synchronizes SQL Azure databases. For an Introduction to developing cloud based apps, click here Now, in this article, I aim to provide a bird’s eye view of how a code that synchronizes SQL Azure databases look like and then list resources that can help you develop the solution from scratch. Now, if you newly add a worker role to the cloud-based project, this is how the code will look like. (Note: I have added comments to the skeleton code to point out the modifications that will be required in the code to carry out the SQL Azure synchronization. Note the placement of Setup() and Sync() function.) Click here (http://parasdoshi1989.files.wordpress.com/2011/06/code-snippet-1-for-extending-sql-azure-with-azure-worker-role1.pdf ) Enabling SQL Azure databases synchronization through sync framework is a two-step process. In the first step, the database is provisioned and sync framework creates tracking tables, stored procedures, triggers, and tables to store metadata to enable synchronization. This is one time step. The code for the same is put in the setup() function which is called once when the worker role starts. Now, the second step is continuous (or on demand) synchronization of SQL Azure databases by propagating changes between databases. This is done on a continuous basis by calling the sync() function in the while loop. The code logic to synchronize changes between SQL Azure databases should be put in the sync() function. Discussing the coding part step by step is out of the scope of this article. Therefore, let me suggest you a resource, which is given here. Also, note that before you start developing the code, you will need to install SYNC framework 2.1 SDK (download here). Further, you will reference some libraries before you start coding. Details regarding the same are available in the article that I just pointed to. You will be charged for data transfers if the databases are not in the same datacenter. For pricing information, go here Currently, a tool named DATA SYNC, which is built on top of sync framework, is available in CTP that allows SQL Azure <-> SQL server and SQL Azure <-> SQL Azure synchronization (without writing single line of code); however, in some cases, the custom code shown in this blogpost provides flexibility that is not available with Data SYNC. For instance, filtering is not supported in the SQL Azure DATA SYNC CTP2; if you wish to have such a functionality now, then you have the option of developing a custom code using SYNC Framework. Now, this code can be easily extended to synchronize at some schedule. Let us say we want the databases to get synchronized every day at 10:00 pm. This is what the code will look like now: (http://parasdoshi1989.files.wordpress.com/2011/06/code-snippet-2-for-extending-sql-azure-with-azure-worker-role.pdf) Don’t you think that by writing such a code, we are imitating the functionality provided by the SQL server agent for a SQL server? Think about it. We are scheduling our administrative task by writing custom code – in other words, we have developed a “Light weight SQL server agent for SQL Azure!” Since the SQL server agent is not currently available in cloud, we have developed a solution that enables us to schedule tasks, and thus we have extended SQL Azure with the Azure worker role! Now if you wish to track jobs, you can do so by storing this data in SQL Azure (or Azure tables). The reason is that Windows Azure is a stateless platform, and we will need to store the state of the job ourselves and the choice that you have is SQL Azure or Azure tables. Note that this solution requires custom code and also it is not UI driven; however, for now, it can act as a temporary solution until SQL server agent is made available in the cloud. Moreover, this solution does not encompass functionalities that a SQL server agent provides, but it does open up an interesting avenue to schedule some of the tasks such as backup and synchronization of SQL Azure databases by writing some custom code in the Azure worker role. Now, let us see one more possibility – i.e., running BCP through a worker role in Azure-hosted services and then uploading the backup files either locally or on blobs. If you upload it locally, then consider the data transfer cost. If you upload it to blobs residing in the same datacenter, then no transfer cost applies but the cost on blob size applies. So, before choosing the option, you need to evaluate your preferences keeping the cost associated with each option in mind. In this article, I have shown that Azure worker role solution could be developed to synchronize SQL Azure databases. Moreover, a light-weight SQL server agent for SQL Azure can be developed. Also we discussed the possibility of running BCP through a worker role in Azure-hosted services for backing up our precious SQL Azure data. Thus, we can extend SQL Azure with the Azure worker role. But remember: you will be charged for running Azure worker roles. So at the end of the day, you need to ask – am I willing to build a custom code and pay money to achieve this functionality? I hope you found this blog post interesting. If you have any questions/feedback, you can comment below or you can mail me at Paras[at]student-partners[dot]com Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Azure, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • CodePlex Daily Summary for Friday, August 22, 2014

    CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

    Read the article

  • Reviewing Retail Predictions for 2011

    - by David Dorf
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I've been busy thinking about what 2012 and beyond will look like for retail, and I have some interesting predictions to share.  But before I go there, let’s first review this year’s predictions before making new ones for 2012. 1. Alternate Payments We've seen several alternate payment schemes emerge over the last two years, and 2011 may be the year one of them takes hold. Any competition that can drive down fees will be good for everyone. I'm betting that Apple will add NFC chips to their next version of the iPhone, then enable payments in stores using iTunes accounts on the backend. Paypal will continue to make inroads, and Isis will announce a pilot. The iPhone 4S did not contain an NFC chip, so we’ll have to continuing waiting for the iPhone 5. PayPal announced its moving into in-store payments, and Google launched its wallet in selected cities.  Overall I think the payment scene is heating up and that trend will continue. 2. Engineered Systems The industry is moving toward purpose-built appliances that are optimized across the entire stack. Oracle calls these "engineered systems" and the first two examples are Exadata and Exalogic, but there are other examples from other vendors. These are particularly important to the retail industry because of the volume of data that must be processed. There should be continued adoption in 2011. Oracle reports that Exadata is its fasting growing product, and at the recent OpenWorld it announced the SuperCluster and Exalytics products, both continuing the engineered systems trend. SAP’s HANA continues to receive attention, and IBM also seems to be moving in this direction. 3. Social Analytics There are lots of tools that provide insight into how a brand is perceived across popular internet sites, but as far as I know, these tools are not industry specific. The next step needs to mine the data and determine how it should influence retail operations. The data needs to help retailers determine how they create promotions, which products to stock, and how to keep consumers engaged. Social data alone does not provide the answers, but its one more data point that will help retailers make better decisions. Look for some vendor consolidation to help make this happen. In March, Salesforce.com acquired leading social monitoring vendor Radian6 and followed up with acquisitions of Heroku and Model Metrics. The notion of Social CRM seems to be going more mainstream now. 4. 2-D Barcodes Look for more QRCodes on shelf-tags, in newspaper circulars, and on billboards. It's a great portal from the physical world into the digital one that buys us time until augmented reality matures further. Nobody wants to type "www", backslash, and ".com" on their phones. QRCodes are everywhere. ‘Nuff said. 5. In the words of Microsoft, "To the Cloud!" My favorite "cloud application" is Evernote. If you take notes on your work laptop, you will inevitably need those notes on your home PC. And if you manage to solve that problem, you'll need to access them from your mobile phone. Evernote stores your notes in the cloud and provides easy ways to access them. Being able to access a service from anywhere and not having to worry about backups, upgrades, etc. is great. Retailers will start to rely on cloud services, both public and private, in the coming year. There were no shortage of announcements in this area: Amazon’s cloud-based Kindle Fire, Apple’s iCloud, Oracle’s Public Cloud, etc. I saw an interesting presentation showing how BevMo moved their systems to the cloud.  Seems like retailers are starting to consider the cloud for specific uses. 6. F-CommerceTop of Form Move over "E" and "M" so we can introduce "F-Commerce," which should go mainstream in 2011. Already several retailers have created small stores on Facebook, and it won't be long before Facebook becomes a full-fledged channel in the omni-channel world of retail. The battle between Facebook and Google will heat up over retail, where both stand to make lots of money. JCPenney and ASOS both put their entire catalogs on Facebook, and lots of other retailers have connected Facebook to their e-commerce site. I still think selling from the newsfeed is the best approach, and several retailers are trying that approach as well. I just don’t see Google+ as a threat to Facebook, so I think that battle is over.  I called 2011 The Year of F-Commerce, and that was probably accurate. Its good to look back at predictions, but we also have to think about what was missed.  I didn't see Amazon entering the tablet business with such a splash, although in hindsight it was obvious. Nor did I think HP would fall so far so fast.  Look for my 2012 predictions coming soon.

    Read the article

  • ??Recovery Manager (RMAN)??

    - by ??
    Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;} ????,RMAN?Oracle?????????????????????,?RMAN?????????????????,?????????????? ?????,RMAN????? RMAN???????????? RMAN???/?????????? ???????????? ????1487262.1???????????,?????RMAN??/????????4??????: ???? ???? ???? ??????? ???????????????,???????SQLPLUS???,???????????“DD-MON-RR HH24:MI:SS”???????,??????????? ??: SQL>spool monitor.out SQL>@monitor '06-aug-12 16:38:03' ?????RMAN???????????,?????????,?????? - ???????????????????,?????RMAN?????? ???????4??????????????? ???? ??DBA????????V$SESSION_LONGOPS???????????????????????,?????????????????? ??: SID CH CONTEXT SOFAR TOTALWORK % Complete --- -- ------- ------ ---------- ---------- 16 t1 1 181950 1186752 15.33 148 t2 1 249722 422400 59.12 ??: - ???????????????? - ??????????????? ???? ??????RMAN?????????????????????????????????????????????????????????Oracle???????????????????????? ??: SID CH SEQ# EVENT STATE SECONDS --- -- ---- --------------------------------- ------- ------- 16 t1 5735 RMAN backup & recovery I/O WAITING 10 143 8200 SQL*Net message from client WAITING 258.83 148 t2 7941 Backup: MML create a backup piece WAITING 196.13 ?????????T2???????????????,???????T2????????????????? ??: -?CH??????RMAN???,?Rman???????????,????????? -??SEQ#?????????,???????? -?????????,??????SEQ#???? -????????????????RMAN backup & recovery I/O'??????????????IO???? ???? ???????????????????????????????,???????backup_tape_io_slaves=TRUE,?????????????????? ??: SID CH STATUS OPEN_TIME SOFAR Mb TOTMB IO_COUNT % Complete TYPE FILENAME --- -- ----------- ------------------ -------- ------ ---------- -------- ------ ------------- 19 t1 FINISHED 02-aug-12 17:28:42 567.5 567.5 569 100.00 INPUT users01.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3489.99 8704 3490 40.10 INPUT sh.dbf 19 t1 IN PROGRESS 02-aug-12 17:28:42 3778 15113 OUTPUT kvnhlb22_1_1 20 t2 FINISHED 02-aug-12 17:28:38 740 740 742 100.00 INPUT system01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 880 880 882 100.00 INPUT sysaux01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 1680 1680 1682 100.00 INPUT undotbs01.dbf 20 t2 FINISHED 02-aug-12 17:28:38 3007.25 12029 OUTPUT l0nhlb23_1_1 ??: - ???????????????,??RMAN??????IO,??????????IO??,??(Document 360443.1 RMAN Backup Performance) - ?? IO_COUNT??????????? ??????? ?????,????????, ????????????v$backup_sync_io ?????????. ??: SID CH FILENAME TYPE STATUS BSZ BFC OPEN IO_COUNT --- -- ------------ ------ ----------- ------ --- ------------------ -------- 16 t1 ksnhla1b_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:20 1092 148 t2 ktnhla1c_1_1 OUTPUT IN PROGRESS 262144 4 02-aug-12 17:12:15 2968 ??: -?????????????????,??RMAN??????IO -?? IO_COUNT?????????? -??IO_COUNT ????, ???IO_COUNT ????????????,???????????????,????????????? ????: ??????????????? Document 1487262.1 Script to monitor RMAN Backup and Restore Operations Document 144640.1   RMAN: Monitoring Recovery Manager Jobs Document 360443.1   RMAN Backup Performance Document 740911.1   RMAN Restore Performance ??,?????My Oracle Support Database Backup and Recovery community ?Oracle?????????????/??????

    Read the article

  • Oracle Announces New Oracle Exastack Program for ISV Partners

    - by pfolgado
    Oracle Exastack Program Enables ISV Partners to Leverage a Scalable, Integrated Infrastructure to Deliver Their Applications Tuned and Optimized for High-Performance News Facts Enabling Independent Software Vendors (ISVs) and other members of Oracle Partner Network (OPN) to rapidly build and deliver faster, more reliable applications to end customers, Oracle today introduced Oracle Exastack Ready, available now, and Oracle Exastack Optimized, available in fall 2011 through OPN. The Oracle Exastack Program focuses on helping ISVs run their solutions on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud -- integrated systems in which the software and hardware are engineered to work together. These products provide partners with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Leveraging the new Oracle Exastack Program in which applications can qualify as Oracle Exastack Ready or Oracle Exastack Optimized, partners can use available OPN resources to optimize their applications to run faster and more reliably -- providing increased performance to their end users. By deploying their applications on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud, ISVs can reduce the cost, time and support complexities typically associated with building and maintaining a disparate application infrastructure -- enabling them to focus more on their core competencies, accelerating innovation and delivering superior value to customers. After qualifying their applications as Oracle Exastack Ready, partners can note to customers that their applications run on and support Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud component products including Oracle Solaris, Oracle Linux, Oracle Database and Oracle WebLogic Server. Customers can be confident when choosing a partner's Oracle Exastack Optimized application, knowing it has been tuned by the OPN member on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud with a goal of delivering optimum speed, scalability and reliability. Partners participating in the Oracle Exastack Program can also leverage their Oracle Exastack Ready and Oracle Exastack Optimized applications to advance to Platinum or Diamond level in OPN. Oracle Exastack Programs Provide ISVs a Reliable, High-Performance Application Infrastructure With the Oracle Exastack Program ISVs have several options to qualify and tune their applications with Oracle Exastack, including: Oracle Exastack Ready: Oracle Exastack Ready provides qualifying partners with specific branding and promotional benefits based on their adoption of Oracle products. If a partner application supports the latest major release of one of these products, the partner may use the corresponding logo with their product marketing materials: Oracle Solaris Ready, Oracle Linux Ready, Oracle Database Ready, and Oracle WebLogic Ready. Oracle Exastack Ready is available to OPN members at the Gold level or above. Additionally, OPN members participating in the program can leverage their Oracle Exastack Ready applications toward advancement to the Platinum or Diamond levels in the OPN Specialized program and toward achieving Oracle Exastack Optimized status. Oracle Exastack Optimized: When available, for OPN members at the Gold level or above, Oracle Exastack Optimized will provide direct access to Oracle technical resources and dedicated Oracle Exastack lab environments so OPN members can test and tune their applications to deliver optimal performance and scalability on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud. Oracle Exastack Optimized will provide OPN members with specific branding and promotional benefits including the use of the Oracle Exastack Optimized logo. OPN members participating in the program will also be able to leverage their Oracle Exastack Optimized applications toward advancement to Platinum or Diamond level in the OPN Specialized program. Oracle Exastack Labs and ISV Enablement: Dedicated Oracle Exastack lab environments and related technical enablement resources (including Guided Learning Paths and Boot Camps) will be available through OPN for OPN members to further their knowledge of Oracle Exastack offerings, and qualify their applications for Oracle Exastack Optimized or Oracle Exastack Ready. Oracle Exastack labs will be available to qualifying OPN members at the Gold level or above. Partners are eligible to participate in the Oracle Exastack Ready program immediately, which will help them meet the requirements to attain Oracle Exastack Optimized status in the future. Guidelines for Oracle Exastack Optimized, as well as Oracle Exastack Labs will be available in fall 2011. Supporting Quotes "In order to effectively differentiate their software applications in the marketplace, ISVs need to rapidly deliver new capabilities and performance improvements," said Judson Althoff, Oracle senior vice president of Worldwide Alliances and Channels and Embedded Sales. "With Oracle Exastack, ISVs have the ability to optimize and deploy their applications with a complete, integrated and cloud-ready infrastructure that will help them accelerate innovation, unlock new features and functionality, and deliver superior value to customers." "We view performance as absolutely critical and a key differentiator," said Tom Stock, SVP of Product Management, GoldenSource. "As a leading provider of enterprise data management solutions for securities and investment management firms, with Oracle Exadata Database Machine, we see an opportunity to notably improve data processing performance -- providing high quality 'golden copy' data in a reduced timeframe. Achieving Oracle Exastack Optimized status will be a stamp of approval that our solution will provide the performance and scalability that our customers demand." "As a leading provider of Revenue Intelligence solutions for telecommunications, media and entertainment service providers, our customers continually demand more readily accessible, enriched and pre-analyzed information to minimize their financial risks and maximize their margins," said Alon Aginsky, President and CEO of cVidya Networks. "Oracle Exastack enables our solutions to deliver the power, infrastructure, and innovation required to transform our customers' business operations and stay ahead of the game." Supporting Resources Oracle PartnerNetwork (OPN) Oracle Exastack Oracle Exastack Datasheet Judson Althoff blog Connect with the Oracle Partner community at OPN on Facebook, OPN on LinkedIn, OPN on YouTube, or OPN on Twitter

    Read the article

  • Synchronization between Client database and Central Database

    - by Indranil Mutsuddy
    Hello, I am trying to develop UI in C# .NET to synchronize 7 instances of backup databases with the central database one by one (All holding same schema) .The backup database( all 7 instances client databases) which is brought to the central server in a removable device such pendrive will consist of mdf and ldf files from each client and will be attached to the server where the central database resides. After all the client backup databases are attached i need to synchronize(update existing data or insert new data to the central database residing in server) each backup database one by one to central database. I want to know as how i can synchronize betweeen a backup database with a central database using C# .NET

    Read the article

  • Screen (command-line program) bug?

    - by VioletCrime
    fired up my Minecraft server again after about a year off. My server used to run 11.04, which has since been upgraded to 12.04; I lost my management scripts in the upgrade (thought I'd backed up the user's home directory), but whatever, I enjoy developing stuff like that anyways. However, this time around, I'm running into issues. I start the Minecraft server using a detached screen, however the script is unable to 'stuff' commands into the screen instance until I attach to the screen then detach again? Once I do that, I can stuff anything I want into the server's terminal using the -X option, until I stop/start the server again, then I have to reattach and detach in order to restore functionality? Here's the manager script: #!/bin/bash #Name of the screen housing the server (set with the -S flag at startup) SCREENNAME=minecraft1 #Name of the folder housing the Minecraft world FOLDERNAME=world1 startServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Cannot start Minecraft server; it is already running!" else screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server started; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } stopServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (halt) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } stopServerNow (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 5-second warning." screen -S $SCREENNAME -X stuff "/say EMERGENCY SHUTDOWN! 5 seconds to halt." screen -S $SCREENNAME -X stuff $'\015' sleep 5 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' else echo "Server is not running; nothing to stop." fi; } restartServer (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in one minute." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down (restart) in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' sleep 2 startServer else echo "Cannot restart server: it isn't running." fi; } #In order for this function to work, a directory 'backup/$FOLDERNAME' must exist in the same #directory that '$FOLDERNAME' resides backupWorld (){ if screen -list | grep "$SCREENNAME" > /dev/null then echo "Server is running. Giving a 1-minute warning." screen -S $SCREENNAME -X stuff "/say Shutting down (backup) in one minute." screen -S $SCREENNAME -X stuff $'\015' screen -S $SCREENNAME -X stuff "/say Server should be down for no more than a few seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 45 screen -S $SCREENNAME -X stuff "/say Shutting down for backup in 15 seconds." screen -S $SCREENNAME -X stuff $'\015' sleep 15 screen -S $SCREENNAME -X stuff "/stop" screen -S $SCREENNAME -X stuff $'\015' fi sleep 2 if screen -list | grep $SCREENNAME > /dev/null then echo "Server is still running? Error." else cd .. tar -czvf backup0.tar.gz $FOLDERNAME mv backup0.tar.gz backup/$FOLDERNAME cd backup/$FOLDERNAME rm backup10.tar.gz mv backup9.tar.gz backup10.tar.gz mv backup8.tar.gz backup9.tar.gz mv backup7.tar.gz backup8.tar.gz mv backup6.tar.gz backup7.tar.gz mv backup5.tar.gz backup6.tar.gz mv backup4.tar.gz backup5.tar.gz mv backup3.tar.gz backup4.tar.gz mv backup2.tar.gz backup3.tar.gz mv backup1.tar.gz backup2.tar.gz mv backup0.tar.gz backup1.tar.gz cd ../../$FOLDERNAME screen -dmS $SCREENNAME java -Xmx1024M -Xms1024M -jar minecraft_server.jar; sleep 2 if screen -list | grep "$SCREENNAME" > /dev/null then echo "Minecraft server restarted; happy mining!" else echo "ERROR: Minecraft server failed to start!" fi fi; } printCommands (){ echo echo "$0 usage:" echo echo "Start : Starts the server on a detached screen." echo "Stop : Stop the server; includes a 1-minute warning." echo "StopNOW : Stops the server with only a 5-second warning." echo "Restart : Stops the server and starts the server again." echo "Backup : Stops the server (1 min), backs up the world, and restarts." echo "Help : Display this message." } #Forces case-insensitive string comparisons shopt -s nocasematch #Primary 'Switch' if [[ $1 = "start" ]] then startServer elif [[ $1 = "stop" ]] then stopServer elif [[ $1 = "stopnow" ]] then stopServerNow elif [[ $1 = "backup" ]] then backupWorld elif [[ $1 = "restart" ]] then restartServer else printCommands fi

    Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >