Search Results

Search found 40479 results on 1620 pages for 'binary files'.

Page 1512/1620 | < Previous Page | 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519  | Next Page >

  • Bluetooth txt file byte increases????

    - by cheesebunz
    Hi everyone, i am able to xfer files from 1 mobile device to another. When the sender sends this text file of 8 bytes, the receiver end will become a 256bytes txt file and when i open the contents of the txt file, there are my infos plus alot of square boxes. Here is my code from the sender: string fileName = @"SendTest.txt"; System.Uri uri = new Uri("obex://" + selectedAddr + "/" + System.IO.Path.GetFileName(fileName)); ObexWebRequest request = new ObexWebRequest(uri); Stream requestStream = request.GetRequestStream(); FileStream fs = File.OpenRead(fileName); byte[] buffer = new byte[1024]; int readBytes = 1; while (readBytes != 0) { readBytes = fs.Read(buffer,0, buffer.Length); requestStream.Write(buffer,0, readBytes); } requestStream.Close(); ObexWebResponse response = (ObexWebResponse)request.GetResponse(); MessageBox.Show(response.StatusCode.ToString()); response.Close(); Any1 knws how do i solve it?

    Read the article

  • How to extract ALL typedefs and structs and unions from c++ source

    - by Michael Wells
    I have inherited a Visual Studio project that contains hundreds of files. I would like to extract all the typedefs, structs and unions from each .h/.cpp file and put the results in a file). Each typdef/struct/union should be on one line in the results file. This would make sorting much easier. typdef int myType; struct myFirstStruct { char a; int b;...}; union Part_Number_Serial_Number_Part_2_Response_Message_Type {struct{Message_Response_Head_Type Head; Part_Num_Serial_Num_Part_2_Report_Array Part_2_Report; Message_Tail_Type Tail;} Data; BYTE byData[140];}myUnion; struct { bool c; int d;...}mySecondStruct; My problem is, I do not know what to look for (grammar of typedef/structs/unions) using a regular expression. I cannot believe that nobody has done this before (I googled and have not found anything on this). Does anyone know the regular expressions for these? (Note some are commented out using // others /* */) Or a tool to accomplish this. Edit: I am toying with the idea of autogenerating source code and/or dialogs for modifying messages that use the underlying typedef/struct/union. I was going to use the output to generate an XML file that could be used for this reason. The source for these are in C/C++ and used in almost all my projects. These projects are usually NOT in C/C++. By using the XML version I would only need to update/add the typedef/struct/union only in one place and all the projects would be able to autogen the source and/or dialogs.

    Read the article

  • Get Image from Byte Aarray.

    - by Arun Thakkar
    Hello Everyone!! Hope You all are fine and also in one of your best of moods!! Hope You all are Enjoying iPhone development. I herewith one issue that i am not able to solve, may be i don't know the depth concept of iPhone. So Its my humble requet to you to guide me or suggest or share your ideas. I do find an issue with getting an image from Bytes array. I am calling a webservice which returns an image in form of Bytes Array as response. I have Converted this bytes array in to form of NSData, Now i have NSData, But When i Try to get an image from this NSData, It shows nil. I Did lots of R&D and Find one suggestion to use base64 encoder, But unfortunately because of not proper guidance I was not able to Implement that. I was also suggested to use OPenSSL Library for base64 from url http://www.cocoadev.com/index.pl?BaseSixtyFour But again i was not able to include #include #include these two files. as in Newer Version of SDK 3.X family Apple has depreciated those (as i guess). So Now i need help from you guys. kindly help me if you have solution or if you know the steps to solve these. Looking Forwards. Regards, Arun Thakkar

    Read the article

  • php Warning: strtotime() Error

    - by Kavithanbabu
    I have changed my joomla and wordpress files from old server to new server. In the front end and admin side its working without any errors. But in the Database (phpmyadmin) Section it shows some warning messages like this.. Warning: strtotime() [function.strtotime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/phpmyadmin/libraries/db_info.inc.php on line 88 Warning: strftime() [function.strftime]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Calcutta' for 'IST/5.0/no DST' instead in /usr/share/phpmyadmin/libraries/common.lib.php on line 1483 Can you please suggest, how to hide these warning messages?? Thanks in advance.

    Read the article

  • How can I store large amount of data from a database to XML (memory problem)?

    - by Andrija
    First, I had a problem with getting the data from the Database, it took too much memory and failed. I've set -Xmx1500M and I'm using scrolling ResultSet so that was taken care of. Now I need to make an XML from the data, but I can't put it in one file. At the moment, I'm doing it like this: while(rs.next()){ i++; xmlStringBuilder.append("\n\t<row>"); xmlStringBuilder.append("\n\t\t<ID>" + Util.transformToHTML(rs.getInt("id")) + "</ID>"); xmlStringBuilder.append("\n\t\t<JED_ID>" + Util.transformToHTML(rs.getInt("jed_id")) + "</JED_ID>"); xmlStringBuilder.append("\n\t\t<IME_PJ>" + Util.transformToHTML(rs.getString("ime_pj")) + "</IME_PJ>"); //etc. xmlStringBuilder.append("\n\t</row>"); if (i%100000 == 0){ //stores the data to a file with the name i.xml storeKBR(xmlStringBuilder.toString(),i); xmlStringBuilder= null; xmlStringBuilder= new StringBuilder(); } and it works; I get 12 100 MB files. Now, what I'd like to do is to do is have all that data in one file (which I then compress) but if just remove the if part, I go out of memory. I thought about trying to write to a file, closing it, then opening, but that wouldn't get me much since I'd have to load the file to memory when I open it. P.S. If there's a better way to release the Builder, do let me know :)

    Read the article

  • NHibernate mapping with two special cases

    - by brainimus
    I am using NHibernate to map a class to a database table. The Part table has an ID column (primary key) and a ParentPart column (along with a few others). class Part { public virtual long ID{ get; set; } public virtual Part ParentPart { get; set; } } The ParentPart is normally another valid part in the part table but I have two special cases. I have a case where the ParentPart column can be 0 (zero) and another case where it can be -1. Neither of these cases currently represent another valid Part object. I was thinking I could make 2 subclasses of Part (ZeroPart and NegativeOnePart) that would never persist. I want the zero and -1 values to be entered in the column but not persist the entire ZeroPart or NegativeOnePart objects. I am unsure how to map this (I'm using hbm files) or if this even the correct approach. How can I map this so that normal valid parts are persisted but I can also handle the special cases? As an aside: My current hbm file has the Part.ID's unsaved value as zero but I think I can just change this in the mapping to something different and default it in the class.

    Read the article

  • How to accept confirmation Automatically in PowerShell for Outlook

    - by user2919845
    How to accept confirmation Automatically in PowerShell for Outlook I have script for Export attachments from email from Outlook - see next It works correctly on one PC, but on another PC is there a problem: Outlook gives message and wants answer: Permit Denny Help If I manually click on Permit or Denny it works correctly. I want to automate it. Can you give me some suggestion how to do it in PowerShell? I have tried to set Outlook to not give this message but I didn’t success. My script: # <-- Script ---------> # script works with outlook Inbox folder # check if email have attachments with ".txt" and save those attachments to $filepath # path for exported files - attachments $filepath = "d:\Exported_files\" # create object outlook $o = New-Object -comobject outlook.application $n = $o.GetNamespace("MAPI") # $f - folder „dorucena posta“ 6 - Inbox $f = $n.GetDefaultFolder(6) # 6 - Inbox # select newest 10 emails, from it olny this one with attachments $f.Items| select -last 10| Where {$_.Attachments}| foreach { # process only unreaded mail if($_.unread -eq $True) { # processed mail set as read, not to process this mail again next day $_.unread = $False $SenderName = $_.SenderName Write-Host "Email from: ", $SenderName # process all attachments $_.attachments|foreach { $a = $_.filename If ($a.Contains(".txt")) { Write-Host $SenderName," ", $a # copy *.txt attachments to folder $filepath $_.saveasfile((Join-Path $filepath "$a")) } } } } Write-Host "Finish" # <------ End Script ---------------------------------->

    Read the article

  • (RoR) How to: link multiple apps, multiple URLs, one database

    - by Samson
    Hello. I am currently developing a site using Ruby on Rails. I am still a beginner who just started around a month ago. I use InstantRails on Windows 7. Here's my question. Let's say app A is functional using MYSQL database A_development. The files such as views and controller are under folder 'A'. I now know how to, say for example, link www.app.com to this app by opening port 80 and changing some lines in the mySQL config. In this app, you can register your username, login, and post some messages. I now want to create some pretty identical apps say B and C. The only thing different will be the posts that shows, and the views. You can still log in with the same username, and everything is saved in the same database. I now want the URLs to look something like A.app.com leading to app A, B.app.com leading to app B, etc. Can that be achieved? How? I've been googling for a few days already and I'm still lost. As I'm new to this forum, I'm not quite sure what info do you guys need. Please list and I'll provide them asap. Any help will be appreciated! Thanks.

    Read the article

  • Artisan unable to access environment variables from $_ENV

    - by hansn
    Any artisan command I enter into the command line throws this error: $ php artisan <? return array( 'DB_HOSTNAME' => 'localhost', 'DB_USERNAME' => 'root', 'DB_NAME' => 'pc_booking', 'DB_PASSWORD' => 'secret', ); PHP Warning: Invalid argument supplied for foreach() in /home/martin/code/www/pc_backend/vendor/laravel/framework/src/Illuminate/Config/EnvironmentVariables.php on line 35 {"error":{"type":"ErrorException","message":"Undefined index: DB_HOSTNAME","file":"\/home\/martin\/code\/www\/pc_backend\/app\/config\/database.php","line":57}} This is only on my local development system, where I recently installed apache and php. On my production system on a shared host artisan commands work just fine. The prod system has it's own .env.php, but other than that the code should be identical. Relevant files: .env.local.php <? return array( 'DB_HOSTNAME' => 'localhost', 'DB_USERNAME' => 'root', 'DB_NAME' => 'pc_booking', 'DB_PASSWORD' => 'secret', ); app/config/database.php <?php return array( 'fetch' => PDO::FETCH_CLASS, 'default' => 'mysql', 'connections' => array( 'mysql' => array( 'driver' => 'mysql', 'host' => $_ENV['DB_HOSTNAME'], 'database' => $_ENV['DB_NAME'], 'username' => $_ENV['DB_USERNAME'], 'password' => $_ENV['DB_PASSWORD'], 'charset' => 'utf8', 'collation' => 'utf8_unicode_ci', 'prefix' => '', ), ), 'migrations' => 'migrations', ), ); The $_ENV array is populated as expected on the website - the problem appears to be with artisan only.

    Read the article

  • Deploying a WAR to tomcat only using a context descriptor

    - by DanglingElse
    i need to deploy a web application in WAR format to a remote tomcat6 server. The thing is that i don't want to do that the easy way, meaning not just copy/paste the WAR file to /webapps. So the second choice is to create a unique "Context Descriptor" and pointing this out to the WAR file. (Hope i got that right till here) So i have a few questions: Is the WAR file allowed to be anywhere in the file system? Meaning can i copy the WAR file anywhere in the remote file system, except /webapps or any other folder of the tomcat6 installation? Is there an easy way to test whether the deployment was successful or not? Without using any browser or anything, since i'm reaching to the remote server only via SSH and terminal. (I'm thinking ping?) Is it normal that the startup.sh/shutdown.sh don't exist? I'm not the admin of the server and don't know how the tomcat6 is installed. But i'm sure that in my local tomcat installations these files are in /bin and ready to use. I mean you can still start/restart/stop the tomcat etc., but not with the these -standard?- scripts. Thanks a lot.

    Read the article

  • Precompile assets for a rails engine

    - by Peter Ehrlich
    In a standard app, I have this line in my production.rb, which creates endpoints for non-default precompiled assets: config.assets.precompile += %w( mobile.css ) My rails engine is a standard Sinatra app. It has its own assets. When on development, these assets are served fine, presumably the web requests are handled by rails and sprockets. On production I'm getting 404s on the assets, and think I have to manually tell sprockets to provide the files. How can this be done without tightly linking? It isin't evident how to set up env-specific initializers for engines. Is this done? Not only, for example, is config/development.rb within the engine not loaded, but there's no way to get the application class itself without knowing its name, in order to modify configuration. And even if there was, it seems that having any engine able to reconfigure the main app would be very bad idea. So maybe its better to let assets handling be done by sinatra itself? Or another instance of sprockets for the engine? How do other engines handle this?

    Read the article

  • Kohana Sessions data does not persist across pages in chrome and ir browsers

    - by user1062637
    Kohana Session data does not persist across pages opened in Chrome and IE browsers the same works fine in a Firefox browser Kohana version used is 2.3 session config files hold $config['driver'] = 'native'; /** * Session storage parameter, used by drivers. */ $config['storage'] = ''; /** * Session name. * It must contain only alphanumeric characters and underscores. At least one letter must be present. */ $config['name'] = 'NITWSESSID'; /** * Session parameters to validate: user_agent, ip_address, expiration. */ $config['validate'] = array(); /** * Enable or disable session encryption. * Note: this has no effect on the native session driver. * Note: the cookie driver always encrypts session data. Set to TRUE for stronger encryption. */ $config['encryption'] = FALSE; /** * Session lifetime. Number of seconds that each session will last. * A value of 0 will keep the session active until the browser is closed (with a limit of 24h). */ $config['expiration'] = 2700; /** * Number of page loads before the session id is regenerated. * A value of 0 will disable automatic session id regeneration. */ $config['regenerate'] = 0; /** * Percentage probability that the gc (garbage collection) routine is started. */ $config['gc_probability'] = 2; Help needed urgently

    Read the article

  • Silverlight, Flash, or JavaScript for web app that runs client-side, or just stick with C#?

    - by Sootah
    Silverlight, Flash, and JavaScript, oh my.. I have a couple of applications that I need to develop for one of my business partners that will be distributed to dozens of people. These applications will need to be able to query information from the internet (query via Google, grab feeds from our other sites, just general web access) and save files to their computer. The reason I want to host the application is so that it all can be centrally managed, and any updates would be instantly deployed to everyone that uses the service. There always seems to be headaches with developing a pure desktop app in a language like C# with regards to making sure people use the latest version, don't have some odd problem with the installer, etc. Since we don't want to tie up our server's CPU I want effectively all of the processing done client-side. Meaning that they would log into their account, access the app, and then all the work done within the app is all handled by their machine. Only specific data would be sent back to the server. So - which language is best for this? Microsoft's Silverlight, Adobe's Flash, or Sun's JavaScript? I've heard a lot of good things about Silverlight and have wanted to try it for some time. I've only done extremely limited JavaScript programming, and absolutely none with Flash. Or, with my main requirement being that the client does all of its own processing should I just stick with C#? Also, is there any way to integrate a C# app into a webpage? I've never even considered it (or have any idea if it's even possible) until just now. Thanks in advance! -Sootah

    Read the article

  • function returns after an XMLHttpRequest

    - by ashays
    Alright, I know questions like this have probably been asked dozens of times, but I can't seem to find a working solution for my project. Recently, while using jQuery for a lot of AJAX calls, I've found myself in a form of callback hell. Whether or not jQuery is too powerful for this project is beyond the scope of this question. So basically here's some code that shows what's going on: function check_form(table) { var file = "/models/"+table+".json"; var errs = {}; var xhr = $.getJSON(file, function(json) { for (key in json) { var k = key; var r = json[k]; $.extend(errs, check_item("#"+k,r)); } }); return errs; } And... as you can probably guess, I get an empty object returned. My original idea was to use some sort of onReadyStateChange idea that would return whenever the readyState had finally hit 4. This causes my application to hang indefinitely, though. I need these errors to decide whether or not the form is allowed to submit or not (as well as to tell the user where the errors are in the application. Any ideas? Edit. It's not the prettiest solution, but I've managed to get it to work. Basically, check_form has the json passed to it from another function, instead of loading it. I was already loading it there, too, so it's probably best that I don't continue to load the same file over and over again anyways. I was just worried about overloading memory. These files aren't absolutely huge, though, so I guess it's probably okay.

    Read the article

  • Declare models elsewhere than in "models.py"

    - by sebpiq
    Hi ! I have an application that splits models into different files. Actually the folder looks like : >myapp __init__.py models.py >hooks ... ... myapp don't care about what's in the hooks, folder, except that there are models, and that they have to be declared somehow. So, I put this in myapp.__init__.py : from django.conf import settings for hook in settings.HOOKS : try : __import__(hook) except ImportError as e : print "Got import err !", e #where HOOKS = ("myapp.hooks.a_super_hook1", ...) The problem is that it doesn't work when I run syncdb(and throws some strange "Got import err !"... strange considering that it's related to another module of my program that I don't even import anywhere :/ ) ! So I tried successively : 1) for hook in settings.HOOKS : try : exec ("from %s import *" % hook) doesn't work either : syncdb doesn't install the models in hooks 2) from myapp.hooks.a_super_hook1 import * This works 3) exec("from myapp.hooks.a_super_hook1 import *") This works to So I checked that in the test 1), the statement executed is the same than in tests 2) and 3), and it is exactly the same ... Any idea ???

    Read the article

  • ASP.NET web form Routing issue via UNC Path

    - by Slash
    I create a IIS 7.0 website via UNC path to load .aspx to dynamic compile files and runs. however, it's running perfect. I always use IIS URL Rewrite module 2 to rewrite my site URL n' its perfect, too. Today, I wanna use System.Web.Routing to implement url rewrite but I encountered difficulties... When I wrote code in Global.asax: System.Web.Routing.RouteTable.Routes.MapPageRoute("TEST", "AAA/{prop}", "~/BBB/CCC.aspx"); And it just CANNOT reDirect to /BBB/CCC.aspx When I type the URL(like: xx.xx.xx.xx/BBB/CCC.aspx) in browser directly, it runs normally that I want. (so it proof CCC.aspx is in right path.) thus, I copy all of the code and open VS2010 running with IIS 7.5 Express locally, it works perfect! e.g: in browser URL I type xx.xx.xx.xx/AAA/1234, it will turn to page xx.xx.xx.xx/BBB/CCC.aspx (Works perfect!) Why??? help me plz. thanks. Update: I think I should consider not UNC path to make it error! when I move all code to physical disk and setup IIS 7.0 to monitor this Folder, it still not works! But the same code run in VS2010 + IIS 7.5 Express it works!? so strange!

    Read the article

  • How to check what goes wrong in $view->render with Zend Framework?

    - by koko
    Hi, I'm working on a CMS with Widgets. On my localhost the followong code works perfect, but I have no idea what I'm doing wrong ... The neede files exist, I think and I get no error message. As far as I can see, the error occurs in the one before last line of code and I get no error message. $view = new Zend_View(); $view->setScriptPath(APPLICATION_PATH . '/../public/websites/' . My_Cookie::get('alpha_key') . '/views'); $view->headScript()->appendFile($vervang['conf']['jqueryJS']); $view->headLink()->appendStylesheet($vervang['conf']['jqueryCSS']); $view->class = $pluginExtraFinal; $view->vervang = $vervang['data']; $view->moduleName = $moduleName; $parsed = $view->render($vervang['conf']['viewFile']); $inhoud = str_replace($plugin, $parsed, $inhoud); Is there a way to troubleshoot this code? How can I get an error message? What can be wrong? Any suggestions please?

    Read the article

  • How do I compile and build the taf2-curb Ruby gem on Windows XP with MinGW?

    - by Laran Evans
    How do I compile and build the taf2-curb Ruby gem on Windows XP with MinGW? I tried this, but I'm kinda fishing, unsuccessfully. C:\Documents and Settings\Megem install taf2-curb -- --with-curl-include=C:/curl-7.19.5-devel-mingw32/include --with-curl-dir=C:/curl-7.19.5 --with-curl-lib=C:/curl-7.19.5-devel-mingw32/lib --prefix=C:/MinGW --with-curllib Bulk updating Gem source index for: http://gems.rubyforge.org Updating metadata for 73 gems from http://gems.rubyonrails.org ......................................................................... complete Bulk updating Gem source index for: http://gems.github.com Building native extensions. This could take a while... ERROR: Error installing taf2-curb: ERROR: Failed to build gem native extension. C:/Ruby/bin/ruby.exe extconf.rb install taf2-curb -- --with-curl-include=C:/curl-7.19.5-devel-mingw32/include --with-cur l-dir=C:/curl-7.19.5 --with-curl-lib=C:/curl-7.19.5-devel-mingw32/lib --prefix=C:/MinGW --with-curllib checking for curl-config... no checking for main() in true.lib... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --srcdir=. --curdir --ruby=C:/Ruby/bin/ruby --with-curl-dir --with-curl-include=${curl-dir}/include --with-curl-lib=${curl-dir}/lib --with-curllib extconf.rb:9: Can't find libcurl or curl/curl.h (RuntimeError) Try passing --with-curl-dir or --with-curl-lib and --with-curl-include options to extconf. Gem files will remain installed in C:/Ruby/lib/ruby/gems/1.8/gems/taf2-curb-0.4.8.0 for inspection. Results logged to C:/Ruby/lib/ruby/gems/1.8/gems/taf2-curb-0.4.8.0/ext/gem_make.out C:\Documents and Settings\Me I've installed curl-7.19.5 and curl-7.19.5-devel-mingw from this url: http://curl.haxx.se/download.html Help! And thanks!

    Read the article

  • Escape whitespace in paths using nautilus script

    - by Tommy Brunn
    I didn't think this would be as tricky as it turned out to be, but here I am. I'm trying to write a Nautilus script in Python to upload one or more images to Imgur just by selecting and right clicking them. It works well enough with both single images and multiple images - as long as they don't contain any whitespace. In fact, you can upload a single image containing whitespace, just not multiple ones. The problem is that NAUTILUS_SCRIPT_SELECTED_FILE_PATHS returns all the selected files and directories as a space separated string. So for example, it could look like this: print os.environment['NAUTILUS_SCRIPT_SELECTED_FILE_PATHS'] /home/nevon/Desktop/test image.png /home/nevon/Desktop/test.jpg What I need is a way to -either in bash or Python- escape the spaces in the path - but not the spaces that delimit different items. Either that, or a way to put quotation marks around each item. The ultimate solution would be if I could do that in bash and then send the items as separate arguments to my python script. Something like: python uploader.py /home/nevon/Desktop/test\ image.png /home/nevon/Desktop/test.jpg I've tried RTFM'ing, but there doesn't seem to be a lot of good solutions for this. At least not that I've found. Any ideas?

    Read the article

  • Why should I care about RVM's Gemset feature when I use Bundler?

    - by t6d
    I just don't get it. I thought, Bundler was developed to resolve version conflicts between gems. So that I just have to require "bundler/setup" and everything is fine, knowing that Bundler will load the correct versions of all my gems and their dependencies. Now, RVM is great for managing multiple Rubies, I know, but why should I care about the Gemset feature? Do I miss something here? Can it make my development even easier? Maybe, some of you can give me some hints on the perfect RVM + Bundler workflow for both, development and production. I also don't know when RVM starts switching to another Ruby. I know that I can have an .rvmrc file in my project, but do I have to cd to this directory so that the switch happens? Furthermore, I usually use Passenger for development since, thanks to the Passenger.prefpane, integration in Mac OS is great. Can I still do that with RVM or is there a better way to do it? Does Passenger recognize .rvmrc files and switch to the correct Gemset?

    Read the article

  • Having trouble hiding keyboard using invisible button which sits on top of uiscrollview

    - by phil
    I have 3 items in play... 1) UIView sits at the base of the hierarchy and contains the UIScrollview. 2) UIScrollview that is presenting a lengthy user form. 3) An invisible button on the UIScrollview that I'm using to provide "hide the keyboard" features. Notice in the code below that I'm registering to be notified when the keyboard is going to appear and again when it's going to disappear. These are working great. My problem is seemingly one of "layers". See below where I insert the button into the view atIndex:0. This causes the button to be activated and "stuffed" behind the scrollview so that when you click on it, the scrollview grabs the touch and the button is unaware. There is no way to "reach" the button and suppress the keyboard. However, if I insert atIndex:1, the button gets super imposed on top of the text entry fields and so any touch at all is acted upon by the button, which immediately suppresses the keyboard and then disappears. How do I insert the button on top of the UIScrollview but behind the UITextfields that sit there? other logistics: I have a -(void) hidekeyboard function that I have setup with the UIButtion as an IBAction(). And I have the UIButton connected to "files owner" via a ctrl-drag/drop. (Do I need both of those conventions?) This code in ViewDidLoad()... [[NSNotificationCenter defaultCenter] addObserverForName:UIKeyboardWillShowNotification object:nil queue:nil usingBlock:^(NSNotification *notification){ [self.view insertSubview:self.keyboardDismissalButton atIndex:0]; }];

    Read the article

  • shell script filter du and find by a string inside a file in a subfolder

    - by Jason
    I have the following command that I run on cygwin: find /cygdrive/d/tmp/* -maxdepth 0 -mtime -150 -type d | xargs du --max-depth=0 > foldersizesreport.csv I intended to do the following with this command: for each folder under /d/tmp/ that was modified in last 150 days, check its total size including files within it and report it to file foldersizesreport.csv however that is now not good enough for me, as it turns out inside each /d/tmp/subfolder1/somefile.properties /d/tmp/subfolder2/somefile.properties /d/tmp/subfolder3/somefile.properties /d/tmp/subfolder4/somefile.properties so as you see inside each subfolderX there is a file named somefile.properties inside it there is a property SOMEPROPKEY=3808612800100 (among other properties) this is the time in millisecond, i need to change the command so that instead of -mtime -150 it will include in the whole calculation only subfolderX that has a file inside them somefile.properties where the SOMEPROPKEY=3808612800100 is the time in millisecond in future, if the value SOMEPROPKEY=23948948 is in past then dont at all include the folder in the foldersizesreport.csv because its not relevant to me. so the result report should be looking like: /d/tmp/,subfolder1,<itssizein KB> /d/tmp/,subfolder2,<itssizein KB> and if subfolder3 had a SOMEPROPKEY=34243234 (time in ms in past) then it would not be in that csv file. so basically I'm looking for: find /cygdrive/d/tmp/* -maxdepth 0 -mtime -150 -type d | <only subfolders that have in them property in file SOMEPROPKEY=28374874827 - time in ms in future and not in past | xargs du --max-depth=0 > foldersizesreport.csv

    Read the article

  • MySQLPython is ignoring my my.cnf file. Where does it get its information?

    - by ?????
    When I try to use MySQLPython (via SQLAlchemy) I get the error File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/MySQL_python-1.2.3c1-py2.6-macosx-10.6-x86_64.egg/MySQLdb/connections.py", line 188, in __init__ super(Connection, self).__init__(*args, **kwargs2) sqlalchemy.exc.OperationalError: (OperationalError) (2002, "Can't connect to local MySQL server through socket '/opt/local/var/run/mysql5/mysqld.sock' (2)") None None but no other mysql client on my machine sees it fine! My my.cnf file states: [client] port = 3306 socket = /tmp/mysql/mysql.sock [safe_mysqld] socket = /tmp/mysql/mysql.sock [mysqld_safe] socket = /tmp/mysql/mysql.sock [mysqld] socket = /tmp/mysql/mysql.sock port = 3306 and the mysql.sock file is, indeed, located in /tmp/mysql I verified that ~/.my.cnf and /var/lib/mysql/my.cnf aren't overriding it. The mysql5 client program, etc, has no trouble connecting and neither does a groovy/grails installation on the same machine using jdbc/mysql connection thrilllap-2:~ swirsky$ mysql5 Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 6 Server version: 5.1.47 Source distribution Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL v2 license Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | test | +--------------------+ 2 rows in set (0.00 sec) mysql> Why can't MySQLdb for python figure this out? Where would it look if not the my.cnf files?

    Read the article

  • Configuring PHP in IIS with Tomcat

    - by Silent Walker
    I have my Java site running under IIS 7. I need to install wordpress blog in it. I've installed and configured PHP in IIS. I have tested the PHP handler by creating a separate site, everything works fine, phpinfo() gives the desired output. However, I'm having problem running the PHP files inside my Java web application. I've put my test PHP file inside a folder called blog. When I access this folder in the browser as /mysite/blog I get a 404 page from my Java application. When I try to invoke the php page directly, http://mysite/blog/index.php, I get an unprocessed php page. I'm using isapi_handler for the reidrects. How do I tell my isapi_handler to ignore /blog folder? In my IIS handler mapping, *.php is mapped with Fast CGI. I'm not sure how to approach this problem and any help on this would be much appreciated. Thanks in advance.

    Read the article

  • PHP package manager

    - by Mathias
    Hey, does anyone know a package manager library for PHP (as e.g. apt or yum for linux distros) apart from PEAR? I'm working on a system which should include a package management system for module management. I managed to get a working solution using PEAR, but using the PEAR client for anything else than managing a PEAR installation is not really the optimal solution as it's not designed for that. I would have to modify/extend it (e.g. to implement actions on installation/upgrade or to move PEAR specific files like lockfiles away from the system root) and especially the CLI client code is quite messy and PHP4. So maybe someone has some suggestions for an alternative PEAR client library which is easy to use and extend (the server side has some nice implementations like Pirum and pearhub) for completely different package management systems written in PHP (ideally including dependency tracking and different channels) for some general ideas how to implement such a PM system (yes, I'm still tinkering with the idea of implementing such a system from scratch) I know that big systems like Magento and symfony use PEAR for their PM. Magento uses a hacked version of the original PEAR client (which I'd like to avoid), symfony's implementation seems quite integrated with the framework, but would be a good starting point to at least write the client from scratch. Anyway, if anybody has suggestions: please :)

    Read the article

< Previous Page | 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519  | Next Page >