Search Results

Search found 94339 results on 3774 pages for 'system data'.

Page 152/3774 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

  • Cannot get at data in my NAS

    - by Ben
    I've got a bit of an issue that I'm hoping you can help me with. I have an Iomega ix4 as my NAS. This runs Linux and each drive in the box has 2 partitions: one for the OS and RAID info, and the second for the actual data. I had it configured as RAID5. Recently one of the drives failed. At this point all of the data was available, it was just reporting a failed drive. I had a drive of the same capacity (although not the exact same spec) which I swapped in place of the failed drive. It recognised it, and started to rebuild the data protection. So far so good ... or so I thought. The next day, after data protection had finished reconstructing, the NAS was telling me that 4 new drives had been added, and wanted confirmation to overwrite the data. Obviously I declined to do this. I swapped the failed drive back in again, in the hope that it would return to its previous state of the data being accessible, but one failed disk. However it didn't - it still tells me that the NAS has 4 new drives in it. I am hopeful that the actual data is untouched, so what I need to do is get it to rebuild the RAID without touching the data on the disks. I have ssh access, and have run stuff like mdadm --examine to see what I can find. The mdadm.conf file has no entry in the "definitions of existing MD arrays" section. I have not run any actual rebuilding commands as yet, because this is entering an area which I am out of my depth in. Please can someone advise the best way of getting my data? Thanks.

    Read the article

  • Trace File Source Adapter

    The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

    Read the article

  • Using the Data Form Web Part (SharePoint 2010) Site Agnostically!

    - by David Jacobus
    Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/24/154465.aspxAs a Developer whom has worked closely with web designers (Power users) in a SharePoint environment, I have come across the issue of making the Data Form Web Part reusable across the site collection! In SharePoint 2007 it was very easy and this blog pointed the way to make it happen: Josh Gaffey's Blog. In SharePoint 2010 something changed! This method failed except for using a Data Form Web Part that pointed to a list in the Site Collection Root! I am making this discussion relative to a developer whom creates a solution (WSP) with all the artifacts embedded and the user shouldn’t have any involvement in the process except to activate features. The Scenario: 1. A Power User creates a Data Form Web Part using SharePoint Designer 2010! It is a great web part the uses all the power of SharePoint Designer and XSLT (Conditional formatting, etc.). 2. Other Users in the site collection want to use that specific web part in sub sites in the site collection. Pointing to a list with the same name, not at the site collection root! The Issues: 1. The Data Form Web Part Data Source uses a List ID (GUID) to point to the specific list. Which means a list in a sub site will have a list with a new GUID different than the one which was created with SharePoint Designer! Obviously, the List needs to be the same List (Fields, Content Types, etc.) with different data. 2. How can we make this web part site agnostic, and dependent only on the lists Name? I had this problem come up over and over and decided to put my solution forward! The Solution: 1. Use the XSL of the Data Form Web Part Created By the Power User in SharePoint Designer! 2. Extend the OOTB Data Form Web Part to use this XSL and Point to a List by name. The solution points to a hybrid solution that requires some coding (Developer) and the XSL (Power User) artifacts put together in a Visual Studio SharePoint Solution. Here are the solution steps in summary: 1. Create an empty SharePoint project in Visual Studio 2. Create a Module and Feature and put the XSL file created by the Power User into it a. Scope the feature to web 3. Create a Feature Receiver to Create the List. The same list from which the Data Form Web Part was created with by the Power User. a. Scope the feature to web 4. Create a Web Part extending the Data Form Web a. Point the Data Form Web Part to point to the List by Name b. Point the Data Form Web Part XSL link to the XSL added using the Module feature c. Scope The feature to Site i. This is because all web parts are in the site collection web part gallery. So in a Narrative Summary: We are creating a list in code which has the same name and (site Columns) as the list from which the Power User created the Data Form Web Part Using SharePoint Designer. We are creating a Web Part in code which extends the OOTB Data Form Web Part to point to a list by name and use the XSL created by the Power User. Okay! Here are the steps with images and code! At the end of this post I will provide a link to the code for a solution which works in any site! I want to TOOT the HORN for the power of this solution! It is the mantra a use with all my clients! What is a basic skill a SharePoint Developer: Create an application that uses the data from a SharePoint list and make that data visible to the user in a manner which meets requirements! Create an Empty SharePoint 2010 Project Here I am naming my Project DJ.DataFormWebPart Create a Code Folder Copy and paste the Extension and Utilities classes (Found in the solution provided at the end of this post) Change the Namespace to match this project The List to which the Data Form Web Part which was used to make the XSL by the Power User in SharePoint Designer is now going to be created in code! If already in code, then all the better! Here I am going to create a list in the site collection root and add some data to it! For the purpose of this discussion I will actually create this list in code before using SharePoint Designer for simplicity! So here I create the List and deploy it within this solution before I do anything else. I will use a List I created before for demo purposes. Footer List is used within the footer of my master page. Add a new Feature: Here I name the Feature FooterList and add a Feature Event Receiver: Here is the code for the Event Receiver: I have a previous blog post about adding lists in code so I will not take time to narrate this code: using System; using System.Runtime.InteropServices; using System.Security.Permissions; using Microsoft.SharePoint; using DJ.DataFormWebPart.Code; namespace DJ.DataFormWebPart.Features.FooterList { /// <summary> /// This class handles events raised during feature activation, deactivation, installation, uninstallation, and upgrade. /// </summary> /// <remarks> /// The GUID attached to this class may be used during packaging and should not be modified. /// </remarks> [Guid("a58644fd-9209-41f4-aa16-67a53af7a9bf")] public class FooterListEventReceiver : SPFeatureReceiver { SPWeb currentWeb = null; SPSite currentSite = null; const string columnGroup = "DJ"; const string ctName = "FooterContentType"; // Uncomment the method below to handle the event raised after a feature has been activated. public override void FeatureActivated(SPFeatureReceiverProperties properties) { using (SPWeb spWeb = properties.GetWeb() as SPWeb) { using (SPSite site = new SPSite(spWeb.Site.ID)) { using (SPWeb rootWeb = site.OpenWeb(site.RootWeb.ID)) { //add the fields addFields(rootWeb); //add content type SPContentType testCT = rootWeb.ContentTypes[ctName]; // we will not create the content type if it exists if (testCT == null) { //the content type does not exist add it addContentType(rootWeb, ctName); } if ((spWeb.Lists.TryGetList("FooterList") == null)) { //create the list if it dosen't to exist CreateFooterList(spWeb, site); } } } } } #region ContentType public void addFields(SPWeb spWeb) { Utilities.addField(spWeb, "Link", SPFieldType.URL, false, columnGroup); Utilities.addField(spWeb, "Information", SPFieldType.Text, false, columnGroup); } private static void addContentType(SPWeb spWeb, string name) { SPContentType myContentType = new SPContentType(spWeb.ContentTypes["Item"], spWeb.ContentTypes, name) { Group = columnGroup }; spWeb.ContentTypes.Add(myContentType); addContentTypeLinkages(spWeb, myContentType); myContentType.Update(); } public static void addContentTypeLinkages(SPWeb spWeb, SPContentType ct) { Utilities.addContentTypeLink(spWeb, "Link", ct); Utilities.addContentTypeLink(spWeb, "Information", ct); } private void CreateFooterList(SPWeb web, SPSite site) { Guid newListGuid = web.Lists.Add("FooterList", "Footer List", SPListTemplateType.GenericList); SPList newList = web.Lists[newListGuid]; newList.ContentTypesEnabled = true; var footer = site.RootWeb.ContentTypes[ctName]; newList.ContentTypes.Add(footer); newList.ContentTypes.Delete(newList.ContentTypes["Item"].Id); newList.Update(); var view = newList.DefaultView; //add all view fields here //view.ViewFields.Add("NewsTitle"); view.ViewFields.Add("Link"); view.ViewFields.Add("Information"); view.Update(); } } } Basically created a content type with two site columns Link and Information. I had to change some code as we are working at the SPWeb level and need Content Types at the SPSite level! I’ll use a new Site Collection for this demo (Best Practice) keep old artifacts from impinging on development: Next we will add this list to the root of the site collection by deploying this solution, add some data and then use SharePoint Designer to create a Data Form Web Part. The list has been added, now let’s add some data: Okay let’s add a Data Form Web Part in SharePoint Designer. Create a new web part page in the site pages library: I will name it TestWP.aspx and edit it in advanced mode: Let’s add an empty Data Form Web Part to the web part zone: Click on the web part to add a data source: Choose FooterList in the Data Source menu: Choose appropriate fields and select insert as multiple item view: Here is what it look like after insertion: Let’s add some conditional formatting if the information filed is not blank: Choose Create (right side) apply formatting: Choose the Information Field and set the condition not null: Click Set Style: Here is the result: Okay! Not flashy but simple enough for this demo. Remember this is the job of the Power user! All we want from this web part is the XLS-Style Sheet out of SharePoint Designer. We are going to use it as the XSL for our web part which we will be creating next. Let’s add a web part to our project extending the OOTB Data Form Web Part. Add new item from the Visual Studio add menu: Choose Web Part: Change WebPart to DataFormWebPart (Oh well my namespace needs some improvement, but it will sure make it readily identifiable as an extended web part!) Below is the code for this web part: using System; using System.ComponentModel; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using Microsoft.SharePoint; using Microsoft.SharePoint.WebControls; using System.Text; namespace DJ.DataFormWebPart.DataFormWebPart { [ToolboxItemAttribute(false)] public class DataFormWebPart : Microsoft.SharePoint.WebPartPages.DataFormWebPart { protected override void OnInit(EventArgs e) { base.OnInit(e); this.ChromeType = PartChromeType.None; this.Title = "FooterListDF"; try { //SPSite site = SPContext.Current.Site; SPWeb web = SPContext.Current.Web; SPList list = web.Lists.TryGetList("FooterList"); if (list != null) { string queryList1 = "<Query><Where><IsNotNull><FieldRef Name='Title' /></IsNotNull></Where><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy></Query>"; uint maximumRowList1 = 10; SPDataSource dataSourceList1 = GetDataSource(list.Title, web.Url, list, queryList1, maximumRowList1); this.DataSources.Add(dataSourceList1); this.XslLink = web.Url + "/Assests/Footer.xsl"; this.ParameterBindings = BuildDataFormParameters(); this.DataBind(); } } catch (Exception ex) { this.Controls.Add(new LiteralControl("ERROR: " + ex.Message)); } } private SPDataSource GetDataSource(string dataSourceId, string webUrl, SPList list, string query, uint maximumRow) { SPDataSource dataSource = new SPDataSource(); dataSource.UseInternalName = true; dataSource.ID = dataSourceId; dataSource.DataSourceMode = SPDataSourceMode.List; dataSource.List = list; dataSource.SelectCommand = "" + query + ""; Parameter listIdParam = new Parameter("ListID"); listIdParam.DefaultValue = list.ID.ToString( "B").ToUpper(); Parameter maximumRowsParam = new Parameter("MaximumRows"); maximumRowsParam.DefaultValue = maximumRow.ToString(); QueryStringParameter rootFolderParam = new QueryStringParameter("RootFolder", "RootFolder"); dataSource.SelectParameters.Add(listIdParam); dataSource.SelectParameters.Add(maximumRowsParam); dataSource.SelectParameters.Add(rootFolderParam); dataSource.UpdateParameters.Add(listIdParam); dataSource.DeleteParameters.Add(listIdParam); dataSource.InsertParameters.Add(listIdParam); return dataSource; } private string BuildDataFormParameters() { StringBuilder parameters = new StringBuilder("<ParameterBindings><ParameterBinding Name=\"dvt_apos\" Location=\"Postback;Connection\"/><ParameterBinding Name=\"UserID\" Location=\"CAMLVariable\" DefaultValue=\"CurrentUserName\"/><ParameterBinding Name=\"Today\" Location=\"CAMLVariable\" DefaultValue=\"CurrentDate\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_firstrow\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_nextpagedata\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocmode\" Location=\"Postback;Connection\"/>"); parameters.Append("<ParameterBinding Name=\"dvt_adhocfiltermode\" Location=\"Postback;Connection\"/>"); parameters.Append("</ParameterBindings>"); return parameters.ToString(); } } } The OnInit method we use to set the list name and the XSL Link property of the Data Form Web Part. We do not have the link to XSL in our Solution so we will add the XSL now: Add a Module in the Visual Studio add menu: Rename Sample.txt in the module to footer.xsl and then copy the XSL from SharePoint Designer Look at elements.xml to where the footer.xsl is being provisioned to which is Assets/footer.xsl, make sure the Web parts xsl link is pointing to this url: Okay we are good to go! Let’s check our features and package: DataFormWebPart should be scoped to site and have the web part: The Footer List feature should be scoped to web and have the Assets module (Okay, I see, a spelling issue but it won’t affect this demo) If everything is correct we should be able to click a couple of sub site feature activations and have our list and web part in a sub site. (In fact this solution can be activated anywhere) Here is the list created at SubSite1 with new data It. Next let’s add the web part on a test page and see if it works as expected: It does! So we now have a repeatable way to use a WSP to move a Data Form Web Part around our sites! Here is a link to the code: DataFormWebPart Solution

    Read the article

  • Trace File Source Adapter

    The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

    Read the article

  • 12c??? - Active Data Guard Far Sync

    - by Jian Zhang(??)
    ?? ================ Active Data Guard Far Sync?Oracle 12c????(???Far Sync Standby),Far Sync?????????????(Primary Database)?????????Far Sync??,??(Primary Database) ??(synchronous)??redo?Far Sync??,??Far Sync????redo??(asynchronous)???????(Standby Database)???????????????????????Far Sync????????,init?????????,???????? ??redo ????Maximum Availability??,???????????(Primary Database)?????????Far Sync??,??(Primary Database)??(synchronous)??redo?Far Sync??,???????(zero data loss),?????Far Sync????,??????,??????????????Far Sync????redo??(asynchronous)???????(Standby Database)? ??redo ????Maximum Performance??,???????????(Primary Database)?????????Far Sync??,??(Primary Database) ????redo?Far Sync??,??Far Sync???????redo?????????(Standby Database)????????????????(Standby Database)??redo???(offload)? Far Sync????Data Guard ????(role transitions)????,?switchover/failover?????12c????? ???????Data Guard ????,?switchover/failover,???????????????Far Sync??,??Far Sync???????????????????? ???Far Sync???????,??????????????2?Far Sync??,???????? ???????Far Sync????? Far Sync??? ================ ????Far Sync ================ 1. ??Data Guard,???11.2??,??????«Active Database Duplication for A standby database» 2. ????Far Sync??,Far Sync????????,init?????????,???????? ??Far Sync???????,?????: SQL> ALTER DATABASE CREATE FAR SYNC INSTANCE CONTROLFILE AS '/tmp/controlfs01.ctl'; 3. ????redo?????Far Sync??,????LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cfs SYNC AFFIRM MAX_FAILURE=1 ALTERNATE=LOG_ARCHIVE_DEST_3 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dg12cfs' 4. ??Far Sync??????redo???,??Far Sync??LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cs ASYNC VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=dg12cs' 5. ????Far Sync???????,??????????????2?Far Sync??? 6. ???????: SQL> select * from  V$DATAGUARD_CONFIG; DB_UNIQUE_NAME       PARENT_DBUN       DEST_ROLE         CURRENT_SCN     CON_ID ------------------------------ ------------------------------     ----------------- ----------- ---------- dg12cfs                        dg12cp          FAR SYNC INSTANCE      682995          0 dg12cs                         dg12cfs         PHYSICAL STANDBY       682995          0 dg12cp                        NONE             PRIMARY DATABASE      683138          0 ????????????????:Oracle_12c_Active_Data_Guard_Far_Sync_v1.pdf

    Read the article

  • Oracle GoldenGate 12c - Leading Enterprise Replication

    - by Doug Reid
    Oracle GoldenGate 12c released  on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space.   In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature,  it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product.     Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c.  Here are the highlights: Optimized for Oracle Database 12c -  GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c.   The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name).  We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB.  By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database.  One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures.  In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes.  This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy.  To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance.  Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth.   GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems.    Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support.   Release 1 includes support for MySQL 5.6 and Sybase 15.7.   Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases.   Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support -   GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter.     Plus,  Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology.  Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail.   In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

    Read the article

  • W2k8, Sybase Driver, Permissions

    - by Clustermagnet
    Trying to get a .net (32bit) app running on a Windows 2008 server. My experience in the Windows world is quite limited. Is this related to the Full/Medium trust settings? Have been Googling for quite some time. Appreciate your feedback! Seeing the following error: Required permissions cannot be acquired. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Security.Policy.PolicyException: Required permissions cannot be acquired. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [PolicyException: Required permissions cannot be acquired.] System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) +7606467 System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) +57 [FileLoadException: Could not load file or assembly 'Sybase.Data.AseClient, Version=1.155.1000.0, Culture=neutral, PublicKeyToken=26e0f1529304f4a7' or one of its dependencies. Failed to grant minimum permission requests. (Exception from HRESULT: 0x80131417)] System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +43 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +127 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +142 System.Reflection.Assembly.Load(String assemblyString) +28 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46 [ConfigurationErrorsException: Could not load file or assembly 'Sybase.Data.AseClient, Version=1.155.1000.0, Culture=neutral, PublicKeyToken=26e0f1529304f4a7' or one of its dependencies. Failed to grant minimum permission requests. (Exception from HRESULT: 0x80131417)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +613 System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +203 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +105 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +163 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +53 System.Web.Compilation.BuildManager.BatchCompileWebDirectory(VirtualDirectory vdir, VirtualPath virtualDir, Boolean ignoreErrors) +175 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath virtualPath) +86 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +261 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +101 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +126 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +62 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +33 System.Web.UI.PageHandlerFactory.GetHandler(HttpContext context, String requestType, String virtualPath, String path) +37 System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +307 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.4959; ASP.NET Version:2.0.50727.4955

    Read the article

  • ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

    - by user141692
    I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

    Read the article

  • Migrating Outlook data with oracle connector for outlook

    - by amir shadaab
    I have a system which uses Oracle connector for MS outlook 2007. I recently bought a new system and I want to transfer al my email(the one that uses oracle connector) to another system with all the same settings. I know that during a normal transfer, I just need to transfer the .pst file and open it in another system. But I'm not sure how to go ahead with Oracle connector servers. Please help me out with this one.

    Read the article

  • Unecrypted Image of Truecrypt-Encrypted System Partition

    - by Dexter
    The general tenor around the internet seems to be that you can't create images of system partitions that have been encrypted (with truecrypt) other than with dd or similar sector-by-sector copy tools. These files however are very impractical given their size (and are obviously incompressible) which makes keeping multiple states/backups of your system partition rather expensive (..especially considering current hdd prices). The problem is that backup tools (like Acronis True Image, Clonezilla, etc.) won't give you the option to create an image of (mounted/opened) Truecrypt partitions, or that there is no recovery environment for restoring the backup, that would allow to run truecrypt before doing any actual restoring. After some trial and error however, I believe I have found a very simple way. Since Truecrypt (running in Linux) creates a virtual block device, that it uses for mounting the unencrypted partitions into the file system, partclone can be used for creating/restoring images. What I did: boot up a linux live disk mount/open the drive/device/partition in truecrypt unmount the filesystem mount point again, like so: umount /media/truecryptX ("X" being the partition number assigend by truecrypt) use partclone (this is what clonezilla would do too, except that clonezilla only offers you to back up real drive partitions, not virtual block devices): partclone.ntfs -c -s /dev/mapper/truecryptX -o nameOfBackupFile for restoring steps 1-3 remain the same, and step 4 is partclone.ntfs -r -s nameOfBackupFile -o /dev/mapper/truecryptX A backup and test-restore of the system (with this method) seems to have worked fine (and the changed settings were reverted to the backup-state). The backup file is ~40 GB (and compressible down to <8GB with 7zip/LZMA2 on the "fast" setting). I can't quite believe that I'm the only one that wants to create images of encrypted drives, but doesn't want to waste 100GB on the backup of one single system state. So my question now is, given how simple this was, and that no one seems to mention anywhere that this is possible - did I miss something? or did I do something wrong? Is there any situation that I didn't think of where this method will fail? Obviously, the backup file needs to be stored in some other encrypted place in order to still remain confidential, since it is unencrypted. Also, in order to do a full "bare metal" restore, one would have to actually first (re-)install Windows, encrypt it, and only then restore the backup file. The funny thing however is that you won't need to backup any partition tables, etc. since the reinstall will effectively take care of that. Is there anything else? This is imho still a lot better than having sector-by-sector images..

    Read the article

  • System failure - need diagnostic recommendation

    - by Ladislav Mrnka
    I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

    Read the article

  • Remote Debian System Preventing Logon

    - by choobablue
    I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

    Read the article

  • How do you clean Core Data generated models and code from a project?

    - by Hazmit
    I'm having an extremely annoying problem with Core Data in the iPhone SDK. I would say in general Core Data for the most part appears easy to use and nice to implement. I have a sqlite database that is being used as a read only reference to pull data elements out for an iPhone app. It would seem there are really mysterious issues relating to what seems to be migration of the database to the most recent versions of my schema. Why can't you just clean out your stored objects and models and let a project redo all of it when you compile next? You would think if you setup a stored object model there would be a way to just reset it and recompile. I've tried what feels like a thousand 'tips' that have been the results of hours of google searches and documentation prowling to figure out how to do this. My most recent error during compile time is below. 2010-04-07 18:23:51.891 PE[1962:207] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Can't merge models with two different entities named 'PElement'' All of this code has been working in the simulator and is only causing me troubles now because I made a change to the schema. I also have the database options for automatically migrating set as below. NSMutableDictionary *optionsDictionary = [NSMutableDictionary dictionary]; [optionsDictionary setObject:[NSNumber numberWithBool:YES] forKey:NSMigratePersistentStoresAutomaticallyOption]; [optionsDictionary setObject:[NSNumber numberWithBool:YES] forKey:NSInferMappingModelAutomaticallyOption];

    Read the article

  • Problem reading from the StandarOutput from ftp.exe. Possible System.Diagnostics.Process Framework b

    - by SoMoS
    Hello, I was trying some stuff executing console applications when I found this problem handling the I/O of the ftp.exe command that everybody has into the computer. Just try this code: m_process = New Diagnostics.Process() m_process.StartInfo.FileName = "ftp.exe" m_process.StartInfo.CreateNoWindow = True m_process.StartInfo.RedirectStandardInput = True m_process.StartInfo.RedirectStandardOutput = True m_process.StartInfo.UseShellExecute = False m_process.Start() m_process.StandardInput.AutoFlush = True m_process.StandardInput.WriteLine("help") MsgBox(m_process.StandardOutput.ReadLine()) MsgBox(m_process.StandardOutput.ReadLine()) MsgBox(m_process.StandardOutput.ReadLine()) MsgBox(m_process.StandardOutput.ReadLine()) This should show you the text that ftp sends you when you do that from the command line: Los comandos se pueden abreviar. Comandos: ! delete literal prompt send ? debug ls put status append dir mdelete pwd trace ascii disconnect mdir quit type bell get mget quote user binary glob mkdir recv verbose bye hash mls remotehelp cd help mput rename close lcd open rmdir Instead of that I'm getting the first line and 3 more with garbage, after that the call to ReadLine block like if there was no data available. Any hints about that?

    Read the article

  • How to test a class that makes HTTP request and parse the response data in Obj-C?

    - by GuidoMB
    I Have a Class that needs to make an HTTP request to a server in order to get some information. For example: - (NSUInteger)newsCount { NSHTTPURLResponse *response; NSError *error; NSURLRequest *request = ISKBuildRequestWithURL(ISKDesktopURL, ISKGet, cookie, nil, nil); NSData *data = [NSURLConnection sendSynchronousRequest:request returningResponse:&response error:&error]; if (!data) { NSLog(@"The user's(%@) news count could not be obtained:%@", username, [error description]); return 0; } NSString *regExp = @"Usted tiene ([0-9]*) noticias? no leídas?"; NSString *stringData = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; NSArray *match = [stringData captureComponentsMatchedByRegex:regExp]; [stringData release]; if ([match count] < 2) return 0; return [[match objectAtIndex:1] intValue]; } The things is that I'm unit testing (using OCUnit) the hole framework but the problem is that I need to simulate/fake what the NSURLConnection is responding in order to test different scenarios and because I can't relay on the server to test my framework. So the question is Which is the best ways to do this?

    Read the article

  • What makes these two R data frames not identical?

    - by Matt Parker
    UPDATE: I remembered dput() about the time Sharpie mentioned it. It's probably the row names. Back in a moment with an answer. I have two small data frames, this_tx and last_tx. They are, in every way that I can tell, completely identical. this_tx == last_tx results in a frame of identical dimensions, all TRUE. this_tx %in% last_tx, two TRUEs. Inspected visually, clearly identical. But when I call identical(this_tx, last_tx) I get a FALSE. Hilariously, even identical(str(this_tx), str(last_tx)) will return a TRUE. If I set this_tx <- last_tx, I'll get a TRUE. What is going on? I don't have the deepest understanding of R's internal mechanics, but I can't find a single difference between the two data frames. If it's relevant, the two variables in the frames are both factors - same levels, same numeric coding for the levels, both just subsets of the same original data frame. Converting them to character vectors doesn't help. Background (because I wouldn't mind help on this, either): I have records of drug treatments given to patients. Each treatment record essentially specifies a person and a date. A second table has a record for each drug and dose given during a particular treatment (usually, a few drugs are given each treatment). I'm trying to identify contiguous periods during which the person was taking the same combinations of drugs at the same doses. The best plan I've come up with is to check the treatments chronologically. If the combination of drugs and doses for treatment[i] is identical to the combination at treatment[i-1], then treatment[i] is a part of the same phase as treatment[i-1]. Of course, if I can't compare drug/dose combinations, that's right out.

    Read the article

  • Best fit curve for trend line

    - by Dave Jarvis
    Problem Constraints Size of the data set, but not the data itself, is known. Data set grows by one data point at a time. Trend line is graphed one data point at a time (using a spline/Bezier curve). Graphs The collage below shows data sets with reasonably accurate trend lines: The graphs are: Upper-left. By hour, with ~24 data points. Upper-right. By day for one year, with ~365 data points. Lower-left. By week for one year, with ~52 data points. Lower-right. By month for one year, with ~12 data points. User Inputs The user can select: the type of time series (hourly, daily, monthly, quarterly, annual); and the start and end dates for the time series. For example, the user could select a daily report for 30 days in June. Trend Weight To calculate the window size (i.e., the number of data points to average when calculating the trend line), the following expression is used: data points / trend weight Where data points is derived from user inputs and trend weight is 6.4. Even though a trend weight of 6.4 produces good fits, it is rather arbitrary, and might not be appropriate for different user inputs. Question How should trend weight be calculated given the constraints of this problem?

    Read the article

  • How to organize live data integrity tests and code unit tests?

    - by karlthorwald
    I have several files with code testing code (which uses a "unittest" class). Later I found it would be nice to test database integrity also. I put this into a separate directory tree. (Things like the keys have correct format, parent and child nodes are pointing correctly and such.) I use the same unittest class for the integrity tests. Now I wonder if it makes really sense to keep this separate. To test the integrity of data I often duplicate parts of code that I use to test the code that handles the data. But it is not the same. The code tests use test databases (that get deleted after each test) and the integrity tests connect to the live data and analyze it. The integrity tests I want to call from cron and send an alarm if something happens in the live database. How would you handle that? Are there standards for such a setup? What is your experience? My tendency is to put everything in the same file, which would result in the code tests also being executed by the cron on the production environment.

    Read the article

  • Checking data of all same class elements

    - by Tiffani
    I need the code to check the data-name value of all instances of .account-select. Right now it just checks the first .account-select element and not any subsequent ones. The function right now is on click of an element such as John Smith, it checks the data-name of the .account-select lis. If the data-names are the same, it does not create a new li with the John Smith data. If no data-names are equal to John Smith, then it adds an li with John Smith. This is the JS-Fiddle I made for it so you can see what I am referring to: http://jsfiddle.net/rsxavior/vDCNy/22/ Any help would be greatly appreciated. This is the Jquery Code I am using right now. $('.account').click(function () { var acc = $(this).data("name"); var sel = $('.account-select').data("name"); if (acc === sel) { } else { $('.account-hidden-li').append('<li class="account-select" data-name="'+ $(this).data("name") +'">' + $(this).data("name") + '<a class="close bcn-close" data-dismiss="alert" href="#">&times;</a></li>'); } }); And the HTML: <ul> <li><a class="account" data-name="All" href="#">All</a></li> <li><a class="account" data-name="John Smith" href="#">John Smith</a></li> </ul> <ul class="account-hidden-li"> <ul>

    Read the article

  • How does the iPhone SDK Core Data system store date types to sqlite?

    - by Andrew Arrow
    I used core data to do this: NSManagedObjectContext *m = [self managedObjectContext]; Foo *f = (Foo *)[NSEntityDescription insertNewObjectForEntityForName:@"Foo" inManagedObjectContext:m]; f.created_at = [NSDate date]; [m insertObject:f]; NSError *error; [m save:&error]; Where the created_at field is defined as type "Date" in the xcdatamodel. When I export the sql from the sqlite database it created, created_at is defined as type "timestamp" and the values look like: 290902422.72624 Nine digits before the . and then some fraction. What is this format? It's not epoch time and it's not julianday format. Epoch would be: 1269280338.81213 julianday would be: 2455278.236746875 (notice only 7 digits before the . not 9 like I have) How can I convert a number like 290902422.72624 to epoch time? Thanks!

    Read the article

  • Why does System.Net.Mail work in one part of my c#.net web app, but not in another?

    - by Marc
    I have a web application that is running on IIS within my company's domain, and is being accessed via intranet. I have this application sending out email based on some user actions. For example, its a scheduling application in part, so if a task is completed, an email is sent out notifying other users of that. The problem is, the email works flawlessly in some cases, and not at all in others. I have a login.aspx page which sends out report emails when the page is loaded (its loaded once a day via windows task scheduler) - this always seems to work perfectly. I have an update page which is supposed to send email when text is entered and the "Update" button is clicked - this operation will fail most of the time. Both of these tasks use the same static overloaded method I wrote to send email using System.Net.Mail. I have tried using gmail as my smtp server (instead of our internal one), and get the same results. I investigated whether having the local SMTP Service running makes any difference, and it doesn't seem to. Besides, since C# is server-side code, shouldn't it only matter whats running on the server, and not the client? Please help me figure out whats wrong! Where should I look? What can I try?

    Read the article

  • Populate a tree from Hierarchical data using 1 LINQ statement

    - by Midhat
    Hi. I have set up this programming exercise. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication2 { class DataObject { public int ID { get; set; } public int ParentID { get; set; } public string Data { get; set; } public DataObject(int id, int pid, string data) { this.ID = id; this.ParentID = pid; this.Data = data; } } class TreeNode { public DataObject Data {get;set;} public List<DataObject> Children { get; set; } } class Program { static void Main(string[] args) { List<DataObject> data = new List<DataObject>(); data.Add(new DataObject(1, 0, "Item 1")); data.Add(new DataObject(2, 0, "Item 2")); data.Add(new DataObject(21, 2, "Item 2.1")); data.Add(new DataObject(22, 2, "Item 2.2")); data.Add(new DataObject(221, 22, "Item 2.2.1")); data.Add(new DataObject(3, 0, "Item 3")); } } } The desired output is a List of 3 treenodes, having items 1, 2 and 3. Item 2 will have a list of 2 dataobjects as its children member and so on. I have been trying to populate this tree (or rather a forest) using just 1 SLOC using LINQ. A simple group by gives me the desired data but the challenge is to organize it in TreeNode objects. Can someone give a hint or an impossibility result for this?

    Read the article

  • Is it Possible to Use Constraints on Hierarchical Data in a Self-Referential Table?

    - by pbarney
    Suppose you have the following table, intended to represent hierarchical data: +--------+-------------+ | Field | Type | +--------+-------------+ | id | int(10) | | parent | int(10) | | name | varchar(45) | +--------+-------------+ The table is self-referential in that the parent_id refers to id. So you might have the following data: +----+--------+---------------+ | id | parent | name | +----+--------+---------------+ | 1 | 0 | fruit | | 2 | 0 | vegetable | | 3 | 1 | apple | | 4 | 1 | orange | | 5 | 3 | red delicious | | 6 | 3 | granny smith | | 7 | 3 | gala | +----+--------+---------------+ Using MySQL, I am trying to impose a (self-referential) foreign key constraint upon the data to cascade on update and prevent deletion of a record if it has any "children." So I used the following: CREATE TABLE `test`.`fruit` ( `id` INT(10) UNSIGNED NOT NULL AUTO_INCREMENT, `parent` INT(10) UNSIGNED, `name` VARCHAR(45) NOT NULL, PRIMARY KEY (`id`), CONSTRAINT `fk_parent` FOREIGN KEY (`parent`) REFERENCES `fruit` (`id`) ON UPDATE CASCADE ON DELETE RESTRICT ) ENGINE = InnoDB; From what I understand, this should fit my requirements. (And parent must default to null to allow insertions, correct?) The problem is, if I change the id of a record, it will not cascade: Cannot delete or update a parent row: a foreign key constraint fails (`test`.`fruit`, CONSTRAINT `fk_parent` FOREIGN KEY (`parent`) REFERENCES `fruit` (`id`) ON UPDATE CASCADE) What am I missing? Feel free to correct me if my terminology is screwed up... I'm new to constraints.

    Read the article

  • Where can I find my iPhone app's Core Data persistent store?

    - by Dr Dork
    I'm diving into iPhone development, so I apologize in advance if this is a ridiculous question, but in a new iPad app project using the Core Data framework, here's the generated code for creating the persistentStoreCoordinator... - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSURL *storeUrl = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"ApplicationName.sqlite"]]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeUrl options:nil error:&error]) { /* Replace this implementation with code to handle the error appropriately. abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. Typical reasons for an error here include: * The persistent store is not accessible * The schema for the persistent store is incompatible with current managed object model Check the error message to determine what the actual problem was. */ NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return persistentStoreCoordinator; } My questions are... The first time I run the app, is the ApplicationName.sqllite database created automatically if it doesn't exist? If not, when is it created? When data is added to it programmatically? Once the DB does exist, where can I locate the file? I'd like to open it with a different program so I can manually manipulate the data. Thanks so much in advance for your help! I'm going to continue researching these questions right now.

    Read the article

  • SQL Query to separate data into two fields

    - by Phillip
    I have data in one column that I want to separate into two columns. The data is separated by a comma if present. This field can have no data, only one set of data or two sets of data saperated by the comma. Currently I pull the data and save as a comma delimited file then use an FoxPro to load the data into a table then process the data as needed then I re-insert the data back into a different SQL table for my use. I would like to drop the FoxPro portion and have the SQL query saperate the data for me. Below is a sample of what the data looks like. Store Amount Discount 1 5.95 1 5.95 PO^-479^2 1 5.95 PO^-479^2 2 5.95 2 5.95 PO^-479^2 2 5.95 +CA8A09^-240^4,CORDRC^-239^7 3 5.95 3 5.95 +CA8A09^-240^4,CORDRC^-239^7 3 5.95 +CA8A09^-240^4,CORDRC^-239^7 In the data above I want to sum the data in the amount field to get a gross amount. Then pull out the specific discount amount which is located between the carat characters and sum it to get the total discount amount. Then add the two together and get the total net amount. The query I want to write will separate the discount field as needed, see store 2 line 3 for two discounts being applied, then pull out the value between carat characters.

    Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >