Search Results

Search found 27244 results on 1090 pages for 'old computer'.

Page 153/1090 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

  Read the article

• trying to make an ad-hoc network between windows xp and windows 7.

  - by djgoosh

  hello , i'm using a usb modem on a windows xp 32 bit pro version and i'm trying to connect to this computer with a windows 7 64 bit pro version. i made myself a personal ad-hoc wireless network. but it doesn't seem to work. the windows xp computer wireless tray icon seems like it's connected but when i go to the windows 7 computer it's seems connected with an error. any help ? thanks in advance , udi

  Read the article

• Is it possible to connect machine to esxi Virtual Machine directly

  - by Mirage

  I have one server and i want to install VMs on that. Now i want to use one of VM as my main OS and i want that when i turn on second computer then that VM OS opens up. One way is to use remote desktop connection but for that i need to install OS on Second computer. Is there any way to directly link Second computer to VM on Server so that i don't have to install OS

  Read the article

• PC with 2 RAMs of different frequencies (1GB 533MHz + 2GB 667MHz) showing only 2GB RAM

  - by srinivas

  I have 6 years old PC with 1.25GB (1GB + 256MB) of DDR2 533MHz RAM. As computer has become very slow and memory usage reaching its limits most of the times, i decided to upgrade RAM. But unfortunately, im not finding retailers selling DDR2 533Mhz RAM near my area. Since I was not sure mixing up RAMs of different frequencies, i searched in web. Most results said they can be mixed but computer would run at lower frequency of the 2 RAMs. So I bought 2GB DDR2 667Mhz RAM expecting my pc to have 3GB RAM running at 533 MHz. But computer properties page shows only 2GB RAM. BIOS settings too show the slot with 2GB 667MHz as ACTIVE and other slot with 1GB 533MHz as "NOT INSTALLED". When I removed 2GB RAM, they computer shows only 1GB RAM. So for some reason, 1GB RAM is not getting detected/used. What is the problem here? thanks in advance.

  Read the article

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• MediaWiki Google map not showing

  - by user67656

  Dear all I have unguarded MediaWiki:1.9.3 to MediaWiki 1.16.1 in a new server.But the google map is not showing in the link.Its a blank in that page but in the old server with old version it is working fine.I am not a developer so I have no clue on this.Please let me know anybody have any idea on this. you can have a look on the below links http://new.realchicago.org/wiki/index.php/Archer_Heights The first link in which the google map is missing.

  Read the article

• Drivers and Codec Compilations

  - by Pennf0lio

  Hi, Do you know any software or compilations that you recommend to handle drivers and codecs for newly formated computer? I am having problem gathering drivers and codecs when I format my computer or other's computer because we frequently misplace it's original drivers. I need an offline solution that doesn't need internet. Same for as the codec, when formating computer we frequently lost our codecs, are there codec packs you know that you would like to recommend? P.s. I had tried driver bot but it's only good when your online, I'm looking for a complete package that has all the driver to most common hardware (eg. Monitor, Sound, etc). Thanks!

  Read the article

• Is it safe to use a single switch for multiple subnets?

  - by George Bailey

  For a moment, forget about whether the following is typical or easy to explain, is it safe and sound? Internet | ISP supplied router x.x.x.1 (public subnet) | switch-------------------------------------+ | (public subnet) | (public subnet) BVI router (switch with an access list) NAT router | (public subnet) | (private subnet 192.168.50.1) +--------------------------------switch----+ (both subnets) | | computer with IP 192.168.50.2 ------+ +----computer with IP x.x.x.2 I don't plan to implement this setup, but I am curious about it. The 50.2 computer may send a packet to the x.2 computer, but it will use 50.1 as the router, since 50.2 knows that the subnet is different. Would this result in the packet being received twice by the x.2 machine, first directly through the switch, second by way of the two routers? Do you see any problems with this aside from how confusing it is, and that it would put one switch doing the work of two subnets?

  Read the article

• How to better copy&paste big files over RDP?

  - by WebMAOhist

  Recently I was making a few attempts to copy&paste a big (1.2 GB) file to remote computer over RDP. The remote computer is virtual testing machine with MS Windows Server 2008 Datacenter. First I tried to copy&paste before midnight when the transfer speed was limited by client computer ISP to 100 kB/s. So, it required a few hours and I was forced to cancel transfer since remote desktop became too unresponsive and sluggish (slow). So, I re-started it over midnight when my local transfer speed is over 4 GB/s 4MB/s (sorry for typo). So, my impression is that independently on speed (broadband) of copy&paste transfer the remote computer becomes sluggish while copying over RDP. At the same time downloading from internet doesn't make remote host sluggish. AFAIU, it is because clipboard of remote computer and so its memory becomes overloaded by transfer. How can I control (restrict) the usage of clipboard for specific process (pasting of file)? What are the possible way to control it? Update: After reading that slow speed of transfer is caused by encryption used for copy&pasting over RDP and since I believe I am more interested in overall efficiency: both the time, or rapidness, of getting file as well as possibility to work without waiting, I changed the question title from: How to control the usage of remote desktop clipboard usage for pasting a big file? to How to better copy&paste big files over RDP? For example, is it better to copy&paste one huge (zip) archive or unzip it and copy paste a folder with unzipped files? And more exactly I wanted to ask: What are possible ways to improve overall experience: the speed of transfer (i.e. availability of needed file) responsiveness of remote host (making remote coputer available for work before completion of copy&pasting)?

  Read the article

• Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

  - by user717236

  My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

  Read the article

• Installing Ubuntu by writing on the Hard Drive

  - by Alexandros Marinos

  I have a laptop whose CD drive is not operational and is too old to boot from a flash stick. I have bought a new hard drive for it for which I have an enclosure. Is there a way to configure the disk as an external to my current ubuntu setup, copy some form of ubuntu on the hard drive, place the HD in the old laptop, and have ubuntu install ubuntu from there? Effectively what I am asking about is some sort of live cd that installs on itself (since the HD is writeable).

  Read the article

• RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

  - by user212475

  I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

  Read the article

• Linux: disbale USB without disabling power

  - by Ergot

  TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Connecting to localhost with smartphone: possible?

  - by Arturas Molcanovas

  I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

  Read the article

• url changed to www...how much time google take to reindex

  - by user20321

  its been about a week i have changed my url from non www to www version it was done by my host provider .....now i want to ask how much time does google take to remove my sitename.com from indexing and replace it with www.sitename.com (site redirection has been already done by host provider )as it is still showing old ones my new urls are indexed but my main url www.sitename.com is not indexed...or so do i have to remove those old urls personally...its been already about 5-6 days?????

  Read the article

• Google Analytics on Demo Site

  - by Josh Smith

  Will adding the UA code of the live site to a revision site affect anything adversely? They are, technically, two different sites with different metrics. I don't want to lose the old data when I initiate the new site, of course. I would also like to work on setting up the new analytics page while the revision site is in development. Does anyone have any good workflows on setting up a revision site without losing old site data?

  Read the article

• Add domain user as local admin in Windows 7 using VPN to connect to domain

  - by kev

  I am rebuilding my work computer from scratch and need to add my domain user as a local admin on my computer. I have successfully added my PC to the domain, but I cannot add my domain user account to the local admins. I have tried to do the following: Connect to the work domain using a Windows VPN Add my computer to the work domain Start right click on Computer Manage - go to Users and Groups right click on Administrators group and add my domain user The problem is that after adding my domain user to the Administrators group, I don't see my domain user under the Local Users group. When I try to log on as my domain user I get the following error message: There are currently no logon servers available to service the logon request Any ideas?

  Read the article

• Where did my backup files go? Can they be recovered?

  - by Ken

  I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

  Read the article

• AVG Installer Error

  - by the curious one

  my computer is running window XP home editon. the avg i am using is expirying soon and so a pop out ask me to install AVG Anti-Virus Free Edition 2011. When the download is about to complete, i was ask to reboot the computer, i click "OK". after my computer restart , there was a pop out say "AVG Installer- Error A system restart is required in order to continue with the installation. Please restart your system and try again." Since the only option was "OK" i click it, and restart my computer. After restarting, the same pop-out appear. I could not download AVG Anti-Virus Free Edition 2011 as the pop-out keep appearing if i run it or uninstall. can anyone help me?? btw my brower is int

  Read the article

• Windows XP hanging on login screen

  - by Nathan W

  I have been given two Eee PC 100HA to manage for some people, they are both running the same hardware and XP home but one is having some strange problems with logging on. The main problem is that it hangs at the login screen for ages and sometimes never gets to the desktop. The strange thing is it only seems to do it after the computer has been cold started, but it won't do it if the computer has been restarted. I have made two logs of the start up with process monitor but every time the logger is attached the computer will log in fine. I have also set the computer to blue screen and create a crash dump when you press ctrl scroll twice but when I do it at the hung login it just sits at a black screen and I don't get a crash dump, I have turned off the auto system restart on failure option also. I can usually fix most computer start up and shutdown problems but this one has got me stuffed. Has anyone had the same problems before, or can recommend something that I can try? Cheers.

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Elastix, how to MOVE files from one server to other server?

  - by yudayyy

  In my office, i have to schedule for moving a file from one computer to other computer (Both are using Elastix). My idea is using cron, scp, and rm to do this. So here are the script that i use: scp -r /home/data/* [email protected]:/home/data1 && rm -r /home/data/* That script did the copy, but not remove the source file. I already read this question: Hov to _MOVE_ files with scp? The problem is, the computer doesn't have an internet connection. So i cannot install rsync on my elastix computer. yum install rsync Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile and then it freezes. Any idea how to do this?

  Read the article

• Use name instead of IP address for home network

  - by abney317

  I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

  Read the article

• Use name instead of IP address for home network

  - by abney317

  I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >