Search Results

Search found 4315 results on 173 pages for 'learner 17'.

Page 154/173 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Differing styles in Python program: what do you suggest?

  - by Noctis Skytower

  A friend of mine wanted help learning to program, so he gave me all the programs that he wrote for his previous classes. The last program that he wrote was an encryption program, and after rewriting all his programs in Python, this is how his encryption program turned out (after adding my own requirements). #! /usr/bin/env python ################################################################################ """\ CLASS INFORMATION ----------------- Program Name: Program 11 Programmer: Stephen Chappell Instructor: Stephen Chappell for CS 999-0, Python Due Date: 17 May 2010 DOCUMENTATION ------------- This is a simple encryption program that can encode and decode messages.""" ################################################################################ import sys KEY_FILE = 'Key.txt' BACKUP = '''\ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO\ PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ _@/6-UC'GzaV0%5Mo9g+yNh8b">Bi=<Lx [sQn#^R.D2Xc(\ Jm!4e${lAEWud&t7]H\`}pvPw)FY,Z~?qK|3SOfk*:1;jTrI''' ################################################################################ def main(): "Run the program: loads key, runs processing loop, and saves key." encode_map, decode_map = load_key(KEY_FILE) try: run_interface_loop(encode_map, decode_map) except SystemExit: pass save_key(KEY_FILE, encode_map) def run_interface_loop(encode_map, decode_map): "Shows the menu and runs the appropriate command." print('This program handles encryption via a customizable key.') while True: print('''\ MENU ==== (1) Encode (2) Decode (3) Custom (4) Finish''') switch = get_character('Select: ', tuple('1234')) FUNC[switch](encode_map, decode_map) def get_character(prompt, choices): "Gets a valid menu option and returns it." while True: sys.stdout.write(prompt) sys.stdout.flush() line = sys.stdin.readline()[:-1] if not line: sys.exit() if line in choices: return line print(repr(line), 'is not a valid choice.') ################################################################################ def load_key(filename): "Gets the key file data and returns encoding/decoding dictionaries." plain, cypher = open_file(filename) return dict(zip(plain, cypher)), dict(zip(cypher, plain)) def open_file(filename): "Load the keys and tries to create it when not available." while True: try: with open(filename) as file: plain, cypher = file.read().split('\n') return plain, cypher except: with open(filename, 'w') as file: file.write(BACKUP) def save_key(filename, encode_map): "Dumps the map into two buffers and saves them to the key file." plain = cypher = str() for p, c in encode_map.items(): plain += p cypher += c with open(filename, 'w') as file: file.write(plain + '\n' + cypher) ################################################################################ def encode(encode_map, decode_map): "Encodes message for the user." print('Enter your message to encode (EOF when finished).') message = get_message() for char in message: sys.stdout.write(encode_map[char] if char in encode_map else char) def decode(encode_map, decode_map): "Decodes message for the user." print('Enter your message to decode (EOF when finished).') message = get_message() for char in message: sys.stdout.write(decode_map[char] if char in decode_map else char) def custom(encode_map, decode_map): "Allows user to edit the encoding/decoding dictionaries." plain, cypher = get_new_mapping() for p, c in zip(plain, cypher): encode_map[p] = c decode_map[c] = p ################################################################################ def get_message(): "Gets and returns text entered by the user (until EOF)." buffer = [] while True: line = sys.stdin.readline() if line: buffer.append(line) else: return ''.join(buffer) def get_new_mapping(): "Prompts for strings to edit encoding/decoding maps." while True: plain = get_unique_chars('What do you want to encode from?') cypher = get_unique_chars('What do you want to encode to?') if len(plain) == len(cypher): return plain, cypher print('Both lines should have the same length.') def get_unique_chars(prompt): "Gets strings that only contain unique characters." print(prompt) while True: line = input() if len(line) == len(set(line)): return line print('There were duplicate characters: please try again.') ################################################################################ # This map is used for dispatching commands in the interface loop. FUNC = {'1': encode, '2': decode, '3': custom, '4': lambda a, b: sys.exit()} ################################################################################ if __name__ == '__main__': main() For all those Python programmers out there, your help is being requested. How should the formatting (not necessarily the coding by altered to fit Python's style guide? My friend does not need to be learning things that are not correct. If you have suggestions on the code, feel free to post them to this wiki as well.

  Read the article

• Java Refuses to Start - Could not reserve enough space for object heap

  - by Randyaa

  Background We have a pool of aproximately 20 linux blades. Some are running Suse, some are running Redhat. ALL share NAS space which contains the following 3 folders: /NAS/app/java - a symlink that points to an installation of a Java JDK. Currently version 1.5.0_10 /NAS/app/lib - a symlink that points to a version of our application. /NAS/data - directory where our output is written All our machines have 2 processors (hyperthreaded) with 4gb of physical memory and 4gb of swap space. We limit the number of 'jobs' each machine can process at a given time to 6 (this number likely needs to change, but that does not enter into the current problem so please ignore it for the time being). Some of our jobs set a Max Heap size of 512mb, some others reserve a Max Heap size of 2048mb. Again, we realize we could go over our available memory if 6 jobs started on the same machine with the heap size set to 2048, but to our knowledge this has not yet occurred. The Problem Once and a while a Job will fail immediately with the following message: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. We used to chalk this up to too many jobs running at the same time on the same machine. The problem happened infrequently enough (MAYBE once a month) that we'd just restart it and everything would be fine. The problem has recently gotten much worse. All of our jobs which request a max heap size of 2048m fail immediately almost every time and need to get restarted several times before completing. We've gone out to individual machines and tried executing them manually with the same result. Debugging It turns out that the problem only exists for our SuSE boxes. The reason it has been happening more frequently is becuase we've been adding more machines, and the new ones are SuSE. 'cat /proc/version' on the SuSE boxes give us: Linux version 2.6.5-7.244-bigsmp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005 'cat /proc/version' on the RedHat boxes give us: Linux version 2.4.21-32.0.1.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Tue May 17 17:52:23 EDT 2005 'uname -a' gives us the following on BOTH types of machines: UTC 2005 i686 i686 i386 GNU/Linux No jobs are running on the machine, and no other processes are utilizing much memory. All of the processes currently running might be using 100mb total. 'top' currently shows the following: Mem: 4146528k total, 3536360k used, 610168k free, 132136k buffers Swap: 4194288k total, 0k used, 4194288k free, 3283908k cached 'vmstat' currently shows the following: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 610292 132136 3283908 0 0 0 2 26 15 0 0 100 0 If we kick off a job with the following command line (Max Heap of 1850mb) it starts fine: java/bin/java -Xmx1850M -cp helloworld.jar HelloWorld Hello World If we bump up the max heap size to 1875mb it fails: java/bin/java -Xmx1875M -cp helloworld.jar HelloWorld Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. It's quite clear that the memory currently being used is for Buffering/Caching and that's why so little is being displayed as 'free'. What isn't clear is why there is a magical 1850mb line where anything higher means Java can't start. Any explanations would be greatly appreciated.

  Read the article

• Software: Launching League of Legends spectator mode from Command Line (Mac)

  - by Alex Popov

  Background: tl;dr at the end League of Legends has a spectator mode, in which you can watch someone else's game (essentially a replay) with a 3 minute delay. Popular LoL website OP.GG has figured out a clever way of hosting these spectator games on their own servers, thereby making them replayable, as opposed to only being available while the game is on (as Riot does it). If you request a replay from OP.GG, it sends a batch file which looks for where the League is situated and then the magic happens: @start "" "League of Legends.exe" "8394" "LoLLauncher.exe" "" "spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1" This works fine on Windows. I'm trying to get it to work on Mac (which has an official client). First I tried running the same command by hand, (split for convenience) /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends 8393 LoLLauncher \ /Applications/ ... /LolClient spectator fspectate.op.gg:4081 tjJbtRLQ/HMV7HuAxWV0XsXoRB4OmFBr 1391881421 NA1 Running this, however, just starts the LoLLauncher, which closes all the active League processes. The exactly same thing happens if I just call /Applications/ ... /LeagueOfLegends.app/ ... /LeagueofLegends Next I tried seeing what actually happens when Spectator mode is initiated so I ran $ ps -axf | grep -i lol which showed UID PID PPID C STIME TTY TIME CMD 503 3085 1 0 Wed02pm ?? 0:00.00 (LolClient) 503 24607 1 0 9:19am ?? 0:00.98 /Applications/League of Legends.app/Contents/LOL/RADS/system/UserKernel.app/Contents/MacOS/UserKernel updateandrun lol_launcher LoLLauncher.app 503 24610 24607 0 9:19am ?? 1:08.76 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_launcher/releases/0.0.0.122/deploy/LoLLauncher.app/Contents/MacOS/LoLLauncher 503 24611 24610 0 9:19am ?? 1:23.02 /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient -runtime .\ -nodebug META-INF\AIR\application.xml .\ -- 8393 503 24927 24610 0 9:44am ?? 0:03.37 /Applications/League of Legends.app/Contents/LoL/RADS/solutions/lol_game_client_sln/releases/0.0.0.117/deploy/LeagueOfLegends.app/Contents/MacOS/LeagueofLegends 8394 LoLLauncher /Applications/League of Legends.app/Contents/LoL/RADS/projects/lol_air_client/releases/0.0.0.127/deploy/bin/LolClient spectator 216.133.234.17:8088 Yn1oMX/n3LpXNebibzUa1i3Z+s2HV0ul 1400781241 NA1 Of Interest: there is (LolClient) which I cannot kill by it's PID. UserKernel updateandrun lol_launcher LoLLauncher.app is launched first. LoLLauncher is launched by the UserKernel (as we can see from the PPID) The very long command (PID: 24927) is how Spectator mode is launched, and is also launched by UserKernel. Spectator mode is launched in exactly the same way that the OP.GG .bat wanted to, with the only difference that Spectator mode connects to Riot instead of OP.GG's spectate server. I tried attaching GDB to the LolClient, but I couldn't get anything meaningful from it since it's an Adobe AIR application (and I've never used GDB with code other than mine own). Next I ran dtruss -a -b 100m -f -p $PID on everything I could think of: the LolClient, the LolLauncher and the UserKernel and skimmed the half a million lines produced. I found stuff like the GET request used to get the information of the game to spectate, but I could not see any launch of the equivalent of League of Legends.exe with spectator options. Finally, I ran lsof | grep -i lol to see if anything else was opened in the process, but didn't find anything that seemed appropriate. Open were UserKernel, LolLauncher, LolClient, Adobe AIR, LeagueofLegends and then Bugsplat, all of which are expected. None of this seemed especially relevant to figuring out how LeagueofLegends was opened into spectator mode. It obviously can be done, since Spectator mode is accessible from within the client. It seems likely that it can be done from the CLI, since Windows can do it and the clients are supposed to equals. Unless I'm missing something in the difference between how UNIX and Windows handle CLI application launches. My question is if there are any other things I can try to figure out how to launch Spectator mode myself. tl;dr: Trying to get into spectator mode from the CLI. It's possible on Windows (see first code block) but it just restarts League on Mac. What else can I try to find what call is made, and how to reproduce it? PS: Please let me know how I can improve this question or its formatting, I'd love to use StackOverflow/SuperUser, but as the guys said on the podcast this week (Ep. 59) it's very intimidating. Sorry for posting this on StackOverflow the first time :(

  Read the article

• Y my interface is not showing when i run the project

  - by Nubkadiya

  i have configured the Sphinx and i have used Main thread to do the recognition part. so that i can avoid the buttons. so currently my design is when the application runs it will check any voice recognition and prompt in the labels. but when i run the project it dont display the interface of the application. only the frame shows. here is the code. if you guys can provide me with any solution for this. it will be great. /* * To change this template, choose Tools | Templates * and open the template in the editor. */ /* * FinalMainWindow.java * * Created on May 17, 2010, 11:22:29 AM */ package FYP; import edu.cmu.sphinx.frontend.util.Microphone; import edu.cmu.sphinx.recognizer.Recognizer; import edu.cmu.sphinx.result.Result; import edu.cmu.sphinx.util.props.ConfigurationManager; //import javax.swing.; //import java.io.; public class FinalMainWindow extends javax.swing.JFrame{ Recognizer recognizer; private void allocateRecognizer() { ConfigurationManager cm; cm = new ConfigurationManager("helloworld.config.xml"); this.recognizer = (Recognizer) cm.lookup("recognizer"); this.recognizer.allocate(); Microphone microphone = (Microphone) cm.lookup("microphone");// TODO add // your if (!microphone.startRecording()) { // System.out.println("Cannot start microphone."); //this.jlblDest.setText("Cannot Start Microphone"); // this.jprogress.setText("Cannot Start Microphone"); System.out.println("Cannot Start Microphone"); this.recognizer.deallocate(); System.exit(1); } } boolean allocated; // property file eka....... //code.google.com private void voiceMajorInput() { if (!allocated) { this.allocateRecognizer(); allocated = true; } Result result = recognizer.recognize(); if (result != null) { String resultText = result.getBestFinalResultNoFiller(); System.out.println("Recognized Result is " +resultText); this.jhidden.setText(resultText); } } /** Creates new form FinalMainWindow */ public FinalMainWindow() { initComponents(); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jhidden = new javax.swing.JLabel(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); jhidden.setText("jLabel1"); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(51, 51, 51) .addComponent(jhidden) .addContainerGap(397, Short.MAX_VALUE)) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(45, 45, 45) .addComponent(jhidden) .addContainerGap(293, Short.MAX_VALUE)) ); pack(); }// </editor-fold> /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { // new FinalMainWindow().setVisible(true); FinalMainWindow mw = new FinalMainWindow(); mw.setVisible(true); mw.voiceMajorInput(); new FinalMainWindow().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JLabel jhidden; // End of variables declaration }

  Read the article

• Why is my interface is not showing when i run the project?

  - by Nubkadiya

  i have configured the Sphinx and i have used Main thread to do the recognition part. so that i can avoid the buttons. so currently my design is when the application runs it will check any voice recognition and prompt in the labels. but when i run the project it dont display the interface of the application. only the frame shows. here is the code. if you guys can provide me with any solution for this. it will be great. /* * To change this template, choose Tools | Templates * and open the template in the editor. */ /* * FinalMainWindow.java * * Created on May 17, 2010, 11:22:29 AM */ package FYP; import edu.cmu.sphinx.frontend.util.Microphone; import edu.cmu.sphinx.recognizer.Recognizer; import edu.cmu.sphinx.result.Result; import edu.cmu.sphinx.util.props.ConfigurationManager; //import javax.swing.; //import java.io.; public class FinalMainWindow extends javax.swing.JFrame{ Recognizer recognizer; private void allocateRecognizer() { ConfigurationManager cm; cm = new ConfigurationManager("helloworld.config.xml"); this.recognizer = (Recognizer) cm.lookup("recognizer"); this.recognizer.allocate(); Microphone microphone = (Microphone) cm.lookup("microphone");// TODO add // your if (!microphone.startRecording()) { // System.out.println("Cannot start microphone."); //this.jlblDest.setText("Cannot Start Microphone"); // this.jprogress.setText("Cannot Start Microphone"); System.out.println("Cannot Start Microphone"); this.recognizer.deallocate(); System.exit(1); } } boolean allocated; // property file eka....... //code.google.com private void voiceMajorInput() { if (!allocated) { this.allocateRecognizer(); allocated = true; } Result result = recognizer.recognize(); if (result != null) { String resultText = result.getBestFinalResultNoFiller(); System.out.println("Recognized Result is " +resultText); this.jhidden.setText(resultText); } } /** Creates new form FinalMainWindow */ public FinalMainWindow() { initComponents(); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jhidden = new javax.swing.JLabel(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); jhidden.setText("jLabel1"); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(51, 51, 51) .addComponent(jhidden) .addContainerGap(397, Short.MAX_VALUE)) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(45, 45, 45) .addComponent(jhidden) .addContainerGap(293, Short.MAX_VALUE)) ); pack(); }// </editor-fold> /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { // new FinalMainWindow().setVisible(true); FinalMainWindow mw = new FinalMainWindow(); mw.setVisible(true); mw.voiceMajorInput(); new FinalMainWindow().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JLabel jhidden; // End of variables declaration }

  Read the article

• on Google App Engine 500 Error, it should be 200 instead of 500

  - by Faisal Amjad

  requestToken = function() { var getTokenURI = '/gettoken?userid=' + userid; var httpRequest = makeRequest(getTokenURI, true); httpRequest.onreadystatechange = function() { if (httpRequest.readyState == 4) { if (httpRequest.status == 200) { openChannel(httpRequest.responseText); } else { alert('ERROR: AJAX request status = ' + httpRequest.status); } } } }; function makeRequest(url, async) { var httpRequest; if (window.XMLHttpRequest) { httpRequest = new XMLHttpRequest(); } else if (window.ActiveXObject) { // IE try { httpRequest = new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { try { httpRequest = new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) { } } } if (!httpRequest) { return false; } httpRequest.open('POST', url, async); httpRequest.send(); return httpRequest; } it is running excellent on localhost...but on google app engine it httpRequest.status equals 500 and goes in else statement. WHY? LOG on google app engine: /getFriendList?userid=d 500 253ms 0kb Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11 175.110.179.86 - - [17/Dec/2012:08:35:33 -0800] "POST /getFriendList?userid=d HTTP/1.1" 500 0 "http://faisalimmsngr.appspot.com/" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.97 Safari/537.11" "faisalimmsngr.appspot.com" ms=254 cpu_ms=110 instance=00c61b117caf2d11ca57d2a2296ccd0b902b038a W 2012-12-17 08:35:33.272 Failed startup of context com.google.apphosting.utils.jetty.RuntimeAppEngineWebAppContext@10ff62a{/,/base/data/home/apps/s~faisalimmsngr/1.363934467542140431} org.mortbay.util.MultiException[java.lang.UnsupportedClassVersionError: adv/web/mid/exam/FriendServlet : Unsupported major.minor version 51.0, java.lang.UnsupportedClassVersionError: adv/web/mid/exam/MessageServlet : Unsupported major.minor version 51.0, java.lang.UnsupportedClassVersionError: adv/web/mid/exam/TokenServlet : Unsupported major.minor version 51.0] at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:656) at org.mortbay.jetty.servlet.Context.startContext(Context.java:140) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:219) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:194) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:134) at com.google.apphosting.runtime.JavaRuntime$RequestRunnable.run(JavaRuntime.java:447) at com.google.tracing.TraceContext$TraceContextRunnable.runInContext(TraceContext.java:454) at com.google.tracing.TraceContext$TraceContextRunnable$1.run(TraceContext.java:461) at com.google.tracing.TraceContext.runInContext(TraceContext.java:703) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContextNoUnref(TraceContext.java:338) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContext(TraceContext.java:330) at com.google.tracing.TraceContext$TraceContextRunnable.run(TraceContext.java:458) at com.google.apphosting.runtime.ThreadGroupPool$PoolEntry.run(ThreadGroupPool.java:251) at java.lang.Thread.run(Thread.java:679) java.lang.UnsupportedClassVersionError: adv/web/mid/exam/FriendServlet : Unsupported major.minor version 51.0 at com.google.appengine.runtime.Request.process-c04431eac3a1f275(Request.java) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:634) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:142) at java.net.URLClassLoader.defineClass(URLClassLoader.java:277) at sun.reflect.GeneratedMethodAccessor5.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) at org.mortbay.util.Loader.loadClass(Loader.java:91) at org.mortbay.util.Loader.loadClass(Loader.java:71) at org.mortbay.jetty.servlet.Holder.doStart(Holder.java:73) at org.mortbay.jetty.servlet.ServletHolder.doStart(ServletHolder.java:242) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:685) at org.mortbay.jetty.servlet.Context.startContext(Context.java:140) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.tracing.TraceContext$TraceContextRunnable.runInContext(TraceContext.java:454) at com.google.tracing.TraceContext$TraceContextRunnable$1.run(TraceContext.java:461) at com.google.tracing.TraceContext.runInContext(TraceContext.java:703) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContextNoUnref(TraceContext.java:338) at com.google.tracing.TraceContext$AbstractTraceContextCallback.runInInheritedContext(TraceContext.java:330) at com.google.tracing.TraceContext$TraceContextRunnable.run(TraceContext.java:458) at java.lang.Thread.run(Thread.java:679)

  Read the article

• Core Plot causing crash on device but not simulator.

  - by Eric

  I'm using core plot to create a small plot in one of my view controllers. I have been pulling my hair out trying to track down this error. I install on the simulator and it works fine but as soon as I put it on my device I get the following error: 2010-02-04 22:15:37.394 Achieve[127:207] *** -[NSCFString drawAtPoint:withTextStyle:inContext:]: unrecognized selector sent to instance 0x108530 2010-02-04 22:15:37.411 Achieve[127:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFString drawAtPoint:withTextStyle:inContext:]: unrecognized selector sent to instance 0x108530' 2010-02-04 22:15:37.427 Achieve[127:207] Stack: ( 843263261, 825818644, 843267069, 842763033, 842725440, 253481, 208187, 823956912, 823956516, 823956336, 823953488, 823952500, 823985628, 842717233, 843010887, 843009055, 860901832, 843738160, 843731504, 8797, 8692 ) terminate called after throwing an instance of 'NSException' Program received signal: “SIGABRT”. Debugger Output (as requested): #0 0x33b3db2c in __kill #1 0x33b3db20 in kill #2 0x33b3db14 in raise #3 0x33b54e3a in abort #4 0x33c5c398 in __gnu_cxx::__verbose_terminate_handler #5 0x313918a0 in _objc_terminate #6 0x33c59a8c in __cxxabiv1::__terminate #7 0x33c59b04 in std::terminate #8 0x33c59c2c in __cxa_throw #9 0x3138fe5c in objc_exception_throw #10 0x32433bfc in -[NSObject doesNotRecognizeSelector:] #11 0x323b8b18 in ___forwarding___ #12 0x323af840 in __forwarding_prep_0___ #13 0x0003de28 in -[CPTextLayer renderAsVectorInContext:] at CPTextLayer.m:117 #14 0x00032d3a in -[CPLayer drawInContext:] at CPLayer.m:146 #15 0x311c95b0 in -[CALayer _display] #16 0x311c9424 in -[CALayer display] #17 0x311c9370 in CALayerDisplayIfNeeded #18 0x311c8850 in CA::Context::commit_transaction #19 0x311c8474 in CA::Transaction::commit #20 0x311d05dc in CA::Transaction::observer_callback #21 0x323ad830 in __CFRunLoopDoObservers #22 0x323f5346 in CFRunLoopRunSpecific #23 0x323f4c1e in CFRunLoopRunInMode #24 0x335051c8 in GSEventRunModal #25 0x324a6c30 in -[UIApplication _run] #26 0x324a5230 in UIApplicationMain #27 0x0000225c in main at main.m:14 Here is my viewDidLoad method: - (void)viewDidLoad { [super viewDidLoad]; self.view.backgroundColor = [[UIColor alloc] initWithPatternImage:[UIImage imageNamed:@"bg.png"]]; [self loadData]; self.graph = [[CPXYGraph alloc] initWithFrame: self.plotView.frame]; CPLayerHostingView *hostingView = self.plotView; hostingView.hostedLayer = graph; graph.paddingLeft = 50; graph.paddingTop = 10; graph.paddingRight = 10; graph.paddingBottom = 10; percentFormatter = [[NSNumberFormatter alloc] init]; [percentFormatter setPercentSymbol:@"%"]; [percentFormatter setNumberStyle:NSNumberFormatterPercentStyle]; [percentFormatter setLocale: [NSLocale currentLocale]]; [percentFormatter setMultiplier:[NSNumber numberWithInt:1]]; [percentFormatter setMaximumFractionDigits:0]; CPXYPlotSpace *plotSpace = (CPXYPlotSpace *)graph.defaultPlotSpace; plotSpace.xRange = [CPPlotRange plotRangeWithLocation:CPDecimalFromFloat(0) length:CPDecimalFromFloat(maxX)]; plotSpace.yRange = [CPPlotRange plotRangeWithLocation:CPDecimalFromFloat(minY) length:CPDecimalFromFloat(maxY-minY)]; CPLineStyle *lineStyle = [[CPLineStyle lineStyle]retain]; lineStyle.lineColor = [CPColor grayColor]; lineStyle.lineWidth = 1.0f; CPTextStyle *whiteText = [CPTextStyle textStyle]; whiteText.color = [CPColor whiteColor]; CPXYAxisSet *axisSet = (CPXYAxisSet *)graph.axisSet; // axisSet.xAxis.majorIntervalLength = [[NSDecimalNumber decimalNumberWithString:@"0"]decimalValue]; axisSet.xAxis.minorTicksPerInterval = 0; axisSet.xAxis.majorTickLineStyle = nil; axisSet.xAxis.minorTickLineStyle = nil; axisSet.xAxis.axisLineStyle = lineStyle; axisSet.xAxis.minorTickLength = 0; axisSet.xAxis.majorTickLength = 0; axisSet.xAxis.labelFormatter = nil; axisSet.xAxis.labelTextStyle = nil; axisSet.yAxis.majorIntervalLength = [[NSDecimalNumber decimalNumberWithString:intY]decimalValue]; axisSet.yAxis.minorTicksPerInterval = 5; axisSet.yAxis.majorTickLineStyle = lineStyle; axisSet.yAxis.minorTickLineStyle = lineStyle; axisSet.yAxis.axisLineStyle = lineStyle; axisSet.yAxis.minorTickLength = 2.0f; axisSet.yAxis.majorTickLength = 4.0f; axisSet.yAxis.labelFormatter = percentFormatter; axisSet.yAxis.labelTextStyle = whiteText; CPScatterPlot *xSquaredPlot = [[[CPScatterPlot alloc]initWithFrame:graph.defaultPlotSpace.graph.bounds] autorelease]; xSquaredPlot.identifier = @"Plot"; xSquaredPlot.dataLineStyle.lineWidth = 4.0f; xSquaredPlot.dataLineStyle.lineColor = [CPColor yellowColor]; xSquaredPlot.dataSource = self; [graph addPlot:xSquaredPlot]; } Any help would be appreciated!

  Read the article

• Why can't my program display this dialog box, while another program can?

  - by nonoitall

  I'm trying to write a wrapper for Winamp input plugins and have hit a bit of a snag. I'd like my wrapper to be able to display a plugin's configuration dialog, which is (or should be) achieved by calling the plugin's Config(HWND hwndParent) function. For most plugins, this works fine and my program is able to display the plugin's configuration dialog. However, 64th Note (a plugin for playing USF files) is giving me problems. Winamp can display its configuration dialog just fine, but whenever I try to display it from my wrapper, the dialog gets destroyed before it ever shows itself. Thankfully, 64th Note is open source, so I took a look at its innards to try and get an idea of what's going wrong. I've trimmed off the irrelevant bits and am left with this: Config function in the plugin (should show configuration dialog): void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_CONFIG_WINDOW, NULL, configDlgProc); } (Slave is the plugin DLL's HINSTANCE handle.) The proc for the dialog is as follows (I have stripped out all the functionality, since it doesn't appear to have an influence on this problem): BOOL CALLBACK configDlgProc(HWND hDlg, UINT uMsg, WPARAM wParam, LPARAM lParam) { return 0; } The template for IDD_CONFIG_WINDOW is as follows: IDD_CONFIG_WINDOW DIALOGEX 0, 0, 269, 149 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "64th Note configuration" FONT 8, "MS Sans Serif", 0, 0, 0x0 BEGIN DEFPUSHBUTTON "OK",IDOK,212,38,50,14 CONTROL "Play Forever",IDC_NOLENGTH,"Button",BS_AUTORADIOBUTTON,7,7,55,8 CONTROL "Always Use Default Length",IDC_SETLEN,"Button",BS_AUTORADIOBUTTON,7,17,101,8 CONTROL "Default Length",IDC_DEFLEN,"Button",BS_AUTORADIOBUTTON,7,29,63,8 EDITTEXT IDC_DEFLENVAL,71,28,38,12,ES_AUTOHSCROLL EDITTEXT IDC_DEFFADEVAL,71,42,38,12,ES_AUTOHSCROLL CONTROL "Detect Silence",IDC_DETSIL,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,7,56,63,8 EDITTEXT IDC_DETSILVAL,71,56,38,12,ES_AUTOHSCROLL CONTROL "Slider2",IDC_PRISLIDER,"msctls_trackbar32",TBS_AUTOTICKS | WS_TABSTOP,74,90,108,11 EDITTEXT IDC_TITLEFMT,7,127,255,15,ES_AUTOHSCROLL CONTROL "Default to file name on missing field",IDC_FNONMISSINGTAG, "Button",BS_AUTOCHECKBOX | WS_TABSTOP,50,114,124,8 CONTROL "Use Recompiler CPU",IDC_RECOMPILER,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,7,83,8 CONTROL "Round Frequency",IDC_ROUNDFREQ,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,16,73,8 CONTROL "Seek Backwards",IDC_BACKWARDS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,26,70,8 CONTROL "Fast Seek",IDC_FASTSEEK,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,35,48,8 CONTROL "RSP Sections",IDC_SECTIONS,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,45,60,8 CONTROL "Soft Amplify",IDC_SOFTAMP,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,54,53,8 CONTROL "Audio HLE",IDC_AUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,63,50,8 CONTROL "Auto Audio HLE",IDC_AUTOAUDIOHLE,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,72,64,8 CONTROL "Display Errors",IDC_DISPERROR,"Button",BS_AUTOCHECKBOX | WS_TABSTOP,145,81,58,8 EDITTEXT IDC_RELVOL,211,104,28,12,ES_AUTOHSCROLL PUSHBUTTON "Cancel",IDCANCEL,212,54,50,14 PUSHBUTTON "Help",IDHELPBUTTON,212,71,50,14 LTEXT "Title format:",IDC_STATIC,7,113,38,8 LTEXT "seconds",IDC_STATIC,112,29,28,8 LTEXT "Default Fade",IDC_STATIC,19,43,42,8 LTEXT "seconds",IDC_STATIC,112,43,28,8 LTEXT "seconds",IDC_STATIC,112,57,28,8 CTEXT "CPU Thread Priority",IDC_STATIC,7,91,63,8 CTEXT "Look ma, I'm data!",IDC_CPUPRI,75,104,108,8 LTEXT "Relative Volume",IDC_STATIC,199,94,52,8 LTEXT "Fade Type",IDC_STATIC,7,75,35,8 COMBOBOX IDC_FADETYPE,45,72,87,74,CBS_DROPDOWNLIST | WS_TABSTOP END Naturally, without any substance in the proc function, the dialog doesn't have any functionality, but it still displays in Winamp when the Config function is invoked. However, it does not appear when I invoke it from my wrapper program. When I monitored the messages sent to the dialog in its proc function, I saw that WM_DESTROY and WM_NCDESTROY were sent within the first few messages, though I have no clue as to why. If I change the Config function so that it displays the plugin's About dialog instead of its configuration dialog, both Winamp and my wrapper will display the About dialog, which suggests that there is something unique to the configuration dialog template that's causing the problem. The modified Config function reads like so: void Config(HWND hwndParent) { DialogBox(slave, (const char *) IDD_ABOUTBOX, NULL, configDlgProc); } The template for the About dialog is as follows: IDD_ABOUTBOX DIALOGEX 0, 0, 152, 151 STYLE DS_SETFONT | DS_MODALFRAME | WS_POPUP | WS_CAPTION | WS_SYSMENU CAPTION "About 64th Note" FONT 8, "MS Sans Serif", 0, 0, 0x1 BEGIN LTEXT "64th Note v1.2 beta 3\nBased on Project 64 1.6 by Zilmar and Jabo\nAudio HLE by Azimer\nPSF concept and tagging by Neill Corlett\nPlayer by hcs, Josh W, dr0\nhttp://hcs64.com/usf",IDC_STATIC,7,94,138,50 CONTROL 110,IDC_STATIC,"Static",SS_BITMAP,26,7,95,86,WS_EX_DLGMODALFRAME END Like I said, my wrapper displays the About dialog just fine, as does Winamp. Why can Winamp display the Config dialog, while my wrapper cannot?

  Read the article

• How can I turn a SimpleXML object to array, then shuffle?

  - by Joshua Cody

  Crux of my problem: I've got an XML file that returns 20 results. Within these results are all the elements I need to get. Now, I need to return them in a random order, and be able to specifically work with item 1, items 2-5, and items 6-17. Idea 1: Use this script to convert the object to an array, which I can shuffle through. This is close to working, but a few of the elements I need to get are under a different namespace, and I don't seem to be able to get them. Code: /* * Convert a SimpleXML object into an array (last resort). * * @access public * @param object $xml * @param boolean $root - Should we append the root node into the array * @return array */ function xmlToArray($xml, $root = true) { if (!$xml->children()) { return (string)$xml; } $array = array(); foreach ($xml->children() as $element => $node) { $totalElement = count($xml->{$element}); if (!isset($array[$element])) { $array[$element] = ""; } // Has attributes if ($attributes = $node->attributes()) { $data = array( 'attributes' => array(), 'value' => (count($node) > 0) ? xmlToArray($node, false) : (string)$node // 'value' => (string)$node (old code) ); foreach ($attributes as $attr => $value) { $data['attributes'][$attr] = (string)$value; } if ($totalElement > 1) { $array[$element][] = $data; } else { $array[$element] = $data; } // Just a value } else { if ($totalElement > 1) { $array[$element][] = xmlToArray($node, false); } else { $array[$element] = xmlToArray($node, false); } } } if ($root) { return array($xml->getName() => $array); } else { return $array; } } $thumbfeed = simplexml_load_file('http://gdata.youtube.com/feeds/api/videos?q=skadaddlemedia&max-results=20&orderby=published&prettyprint=true'); $xmlToArray = xmlToArray($thumbfeed); $thumbArray = $xmlToArray["feed"]; for($n = 0; $n < 18; $n++){ $title = $thumbArray["entry"][$n]["title"]["value"]; $desc = $thumbArray["entry"][0]["content"]["value"]; $videoUrl = $differentNamespace; $thumbUrl = $differentNamespace; } Idea 2: Continue using my working code that is getting the information using a foreach, but store each element in an array, then use shuffle on that. I'm not precisely sure hwo to write to an array within a foreach loop and not write over one another, though. Working code: foreach($thumbfeed->entry as $entry){ $thumbmedia = $entry->children('http://search.yahoo.com/mrss/') ->group ; $thumb = $thumbmedia->thumbnail[0]->attributes()->url; $thumburl = $thumbmedia->content[0]->attributes()->url; $thumburl1 = explode("http://www.youtube.com/v/", $thumburl[0]); $thumbid = explode("?f=videos&app=youtube_gdata", $thumburl1[1]); $thumbtitle = $thumbmedia->title; $thumbyt = $thumbmedia->children('http://gdata.youtube.com/schemas/2007') ->duration ; $thumblength = $thumbyt->attributes()->seconds; } Ideas on if either of these are good solutions to my problem, and if so, how I can get over my execution humps? Thanks so much for any help you can give.

  Read the article

• Cisco PIX 515 doesn't seem to be passing traffic through according to static route

  - by Liquidkristal

  Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

  Read the article

• How to find minimum weight with maximum cost in 0-1 Knapsack algorithm?

  - by Nitin9791

  I am trying to solve a spoj problem Party Schedule the problem statement is- You just received another bill which you cannot pay because you lack the money. Unfortunately, this is not the first time to happen, and now you decide to investigate the cause of your constant monetary shortness. The reason is quite obvious: the lion's share of your money routinely disappears at the entrance of party localities. You make up your mind to solve the problem where it arises, namely at the parties themselves. You introduce a limit for your party budget and try to have the most possible fun with regard to this limit. You inquire beforehand about the entrance fee to each party and estimate how much fun you might have there. The list is readily compiled, but how do you actually pick the parties that give you the most fun and do not exceed your budget? Write a program which finds this optimal set of parties that offer the most fun. Keep in mind that your budget need not necessarily be reached exactly. Achieve the highest possible fun level, and do not spend more money than is absolutely necessary. Input The first line of the input specifies your party budget and the number n of parties. The following n lines contain two numbers each. The first number indicates the entrance fee of each party. Parties cost between 5 and 25 francs. The second number indicates the amount of fun of each party, given as an integer number ranging from 0 to 10. The budget will not exceed 500 and there will be at most 100 parties. All numbers are separated by a single space. There are many test cases. Input ends with 0 0. Output For each test case your program must output the sum of the entrance fees and the sum of all fun values of an optimal solution. Both numbers must be separated by a single space. Example Sample input: 50 10 12 3 15 8 16 9 16 6 10 2 21 9 18 4 12 4 17 8 18 9 50 10 13 8 19 10 16 8 12 9 10 2 12 8 13 5 15 5 11 7 16 2 0 0 Sample output: 49 26 48 32 now I know that it is an advance version of 0/1 knapsack problem where along with maximum cost we also have to find minimum weight that is less than a a given weight and have maximum cost. so I have used dp to solve this problem but still get a wrong awnser on submission while it is perfectly fine with given test cases. My code is typedef vector<int> vi; #define pb push_back #define FOR(i,n) for(int i=0;i<n;i++) int main() { //freopen("input.txt","r",stdin); while(1) { int W,n; cin>>W>>n; if(W==0 && n==0) break; int K[n+1][W+1]; vi val,wt; FOR(i,n) { int x,y; cin>>x>>y; wt.pb(x); val.pb(y); } FOR(i,n+1) { FOR(w,W+1) { if(i==0 || w==0) { K[i][w]=0; } else if (wt[i-1] <= w) { if(val[i-1] + K[i-1][w-wt[i-1]]>=K[i-1][w]) { K[i][w]=val[i-1] + K[i-1][w-wt[i-1]]; } else { K[i][w]=K[i-1][w]; } } else { K[i][w] = K[i-1][w]; } } } int a1=K[n][W],a2; for(int j=0;j<W;j++) { if(K[n][j]==a1) { a2=j; break; } } cout<<a2<<" "<<a1<<"\n"; } return 0; } Could anyone suggest what am I missing??

  Read the article

• My D-Link's Ethernet bridge downlink just got 10-30x slower?

  - by Jay Levitt

  TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

  Read the article

• Improving TCP performance over a gigabit network lots of connections and high traffic for storage and streaming services

  - by Linux Guy

  I have two servers, Both servers hardware Specification are Processor : Dual Processor RAM : over 128 G.B Hard disk : SSD Hard disk Outging Traffic bandwidth : 3 Gbps network cards speed : 10 Gbps Server A : for Encoding videos Server B : for storage videos andstream videos over web interface like youtube The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos Both servers in same network , when i do ping from Server A to Server B i got high time latency above 1.0ms , the time range time=52.7 ms to time=215.7 ms - This is the output of iftop utility 353Mb 707Mb 1.04Gb 1.38Gb 1.73Gb mqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqqvqqqqqqqqqqqqqqqqqqqqqqqqqqq server.example.com => ip.address 6.36Mb 4.31Mb 1.66Mb <= 158Kb 94.8Kb 35.1Kb server.example.com => ip.address 1.23Mb 4.28Mb 1.12Mb <= 17.1Kb 83.5Kb 21.9Kb server.example.com => ip.address 395Kb 3.89Mb 1.07Mb <= 6.09Kb 109Kb 28.6Kb server.example.com => ip.address 4.55Mb 3.83Mb 1.04Mb <= 55.6Kb 45.4Kb 13.0Kb server.example.com => ip.address 649Kb 3.38Mb 1.47Mb <= 9.00Kb 38.7Kb 16.7Kb server.example.com => ip.address 5.00Mb 3.32Mb 1.80Mb <= 65.7Kb 55.1Kb 29.4Kb server.example.com => ip.address 387Kb 3.13Mb 1.06Mb <= 18.4Kb 39.9Kb 15.0Kb server.example.com => ip.address 3.27Mb 3.11Mb 1.01Mb <= 81.2Kb 64.5Kb 20.9Kb server.example.com => ip.address 1.75Mb 3.08Mb 2.72Mb <= 16.6Kb 35.6Kb 32.5Kb server.example.com => ip.address 1.75Mb 2.90Mb 2.79Mb <= 22.4Kb 32.6Kb 35.6Kb server.example.com => ip.address 3.03Mb 2.78Mb 1.82Mb <= 26.6Kb 27.4Kb 20.2Kb server.example.com => ip.address 2.26Mb 2.66Mb 1.36Mb <= 51.7Kb 49.1Kb 24.4Kb server.example.com => ip.address 586Kb 2.50Mb 1.03Mb <= 4.17Kb 26.1Kb 10.7Kb server.example.com => ip.address 2.42Mb 2.49Mb 2.44Mb <= 31.6Kb 29.7Kb 29.9Kb server.example.com => ip.address 2.41Mb 2.46Mb 2.41Mb <= 26.4Kb 24.5Kb 23.8Kb server.example.com => ip.address 2.37Mb 2.39Mb 2.40Mb <= 28.9Kb 27.0Kb 28.5Kb server.example.com => ip.address 525Kb 2.20Mb 1.05Mb <= 7.03Kb 26.0Kb 12.8Kb qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq TX: cum: 102GB peak: 1.65Gb rates: 1.46Gb 1.44Gb 1.48Gb RX: 1.31GB 24.3Mb 19.5Mb 18.9Mb 20.0Mb TOTAL: 103GB 1.67Gb 1.48Gb 1.46Gb 1.50Gb I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.2 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.2, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.1 port 38895 connected with 0.0.0.2 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes ifconfig server A eth0 Link encap:Ethernet HWaddr 00:25:90:ED:9E:AA inet addr:0.0.0.1 Bcast:0.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1202795665 errors:0 dropped:64334 overruns:0 frame:0 TX packets:2313161968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:893413096188 (832.0 GiB) TX bytes:3360949570454 (3.0 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2207544 errors:0 dropped:0 overruns:0 frame:0 TX packets:2207544 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:247769175 (236.2 MiB) TX bytes:247769175 (236.2 MiB) ifconfig Server B eth2 Link encap:Ethernet HWaddr 00:25:90:82:C4:FE inet addr:0.0.0.2 Bcast:0.0.0.2 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39973046980 errors:0 dropped:1828387600 overruns:0 frame:0 TX packets:69618752480 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3013976063688 (2.7 TiB) TX bytes:102250230803933 (92.9 TiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1049495 errors:0 dropped:0 overruns:0 frame:0 TX packets:1049495 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129012422 (123.0 MiB) TX bytes:129012422 (123.0 MiB) Netstat -i on Server B # netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth2 9000 0 42098629968 0 2131223717 0 73698797854 0 0 0 BMRU lo 65536 0 1077908 0 0 0 1077908 0 0 0 LRU I Turn up send/receive buffers on the network card to 2048 and problem still persist I increase the MTU for server A and problem still persist and i increase the MTU for server B for better connectivity and transfer speed but it couldn't transfer at all The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service in server B the transfer in server A at full speed, after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• use .net webbrowser control by multithread, throw "EXCEPTION code=ACCESS_VIOLATION"

  - by user1507827

  i want to make a console program to monitor a webpage's htmlsourcecode, because some of the page content are created by some javescript, so i have to use webbrowser control. like : View Generated Source (After AJAX/JavaScript) in C# my code is below: public class WebProcessor { public string GeneratedSource; public string URL ; public DateTime beginTime; public DateTime endTime; public object GetGeneratedHTML(object url) { URL = url.ToString(); try { Thread[] t = new Thread[10]; for (int i = 0; i < 10; i++) { t[i] = new Thread(new ThreadStart(WebBrowserThread)); t[i].SetApartmentState(ApartmentState.STA); t[i].Name = "Thread" + i.ToString(); t[i].Start(); //t[i].Join(); } } catch (Exception ex) { Console.WriteLine(ex.ToString()); } return GeneratedSource; } private void WebBrowserThread() { WebBrowser wb = new WebBrowser(); wb.ScriptErrorsSuppressed = true; wb.DocumentCompleted += new WebBrowserDocumentCompletedEventHandler( wb_DocumentCompleted); while(true ) { beginTime = DateTime.Now; wb.Navigate(URL); while (wb.ReadyState != WebBrowserReadyState.Complete) { Thread.Sleep(new Random().Next(10,100)); Application.DoEvents(); } } //wb.Dispose(); } private void wb_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { WebBrowser wb = (WebBrowser)sender; if (wb.ReadyState == WebBrowserReadyState.Complete) { GeneratedSource= wb.Document.Body.InnerHtml; endTime = DateTime.Now; Console.WriteLine("WebBrowser " + (endTime-beginTime).Milliseconds + Thread.CurrentThread.Name + wb.Document.Title); } } } when it run, after a while (20-50 times), it throw the exception like this EXCEPTION code=ACCESS_VIOLATION (null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(nul l)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(n ull)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null) (null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(null)(nul l)(null)BACKTRACE: 33 stack frames: #0 0x083dba8db0 at MatchExactGetIDsOfNames in mshtml.dll #1 0x0879f9b837 at StrongNameErrorInfo in mscorwks.dll #2 0x0879f9b8e3 at StrongNameErrorInfo in mscorwks.dll #3 0x0879f9b93a at StrongNameErrorInfo in mscorwks.dll #4 0x0879f9b9e0 at StrongNameErrorInfo in mscorwks.dll #5 0x0879f9b677 at StrongNameErrorInfo in mscorwks.dll #6 0x0879f9b785 at StrongNameErrorInfo in mscorwks.dll #7 0x0879f192a8 at InstallCustomModule in mscorwks.dll #8 0x0879f19444 at InstallCustomModule in mscorwks.dll #9 0x0879f194ab at InstallCustomModule in mscorwks.dll #10 0x0879fa6491 at StrongNameErrorInfo in mscorwks.dll #11 0x0879f44bcf at DllGetClassObjectInternal in mscorwks.dll #12 0x089bbafa at in #13 0x087b18cc10 at in System.Windows.Forms.ni.dll #14 0x087b91f4c1 at in System.Windows.Forms.ni.dll #15 0x08d00669 at in #16 0x08792d6e46 at in mscorlib.ni.dll #17 0x08792e02cf at in mscorlib.ni.dll #18 0x08792d6dc4 at in mscorlib.ni.dll #19 0x0879e71b4c at in mscorwks.dll #20 0x0879e896ce at in mscorwks.dll #21 0x0879e96ea9 at CoUninitializeEE in mscorwks.dll #22 0x0879e96edc at CoUninitializeEE in mscorwks.dll #23 0x0879e96efa at CoUninitializeEE in mscorwks.dll #24 0x0879f88357 at GetPrivateContextsPerfCounters in mscorwks.dll #25 0x0879e9cc8f at CoUninitializeEE in mscorwks.dll #26 0x0879e9cc2b at CoUninitializeEE in mscorwks.dll #27 0x0879e9cb51 at CoUninitializeEE in mscorwks.dll #28 0x0879e9ccdd at CoUninitializeEE in mscorwks.dll #29 0x0879f88128 at GetPrivateContextsPerfCounters in mscorwks.dll #30 0x0879f88202 at GetPrivateContextsPerfCounters in mscorwks.dll #31 0x0879f0e255 at InstallCustomModule in mscorwks.dll #32 0x087c80b729 at GetModuleFileNameA in KERNEL32.dll i have try lots of methods to solve the problem, finally, i found that if i thread sleep more millseconds, it will run for a longer time, but the exception is still throw. hope somebody give me the answer of how to slove ... thanks very much !!!

  Read the article

• Does a portable secondary laptop LCD monitor exist?

  - by Dougnukem

  I'm looking to buy a portable secondary LCD monitor for my Macbook Pro, does anything like that exist? I found some laptops that provide a dual 15'' monitor solution (but it's already baked into the hardware). Also some ideas posted about creating this type of setup back in 2007. I'm looking for something that is as thin as a laptop LCD (with maybe a bulky power supply that I could easily daisy chain or plug into a power strip along with my laptop). How difficult would it be to buy a 17'' laptop screen and hook up a DVI connector and power supply, and build a simple monitor stand for it? I've gotten to used to a dual-monitor setup at work and at home with my laptop that having to use my laptop in single-screen mode makes me feel crippled.

  Read the article

• Objective-C: Scope problems cellForRowAtIndexPath

  - by Mr. McPepperNuts

  How would I set each individual row in cellForRowAtIndexPath to the results of an array populated by a Fetch Request? (Fetch Request made when button is pressed.) - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // ... set up cell code here ... cell.textLabel.text = [results objectAtIndex:indexPath valueForKey:@"name"]; } warning: 'NSArray' may not respond to '-objectAtIndexPath:' Edit: - (NSArray *)SearchDatabaseForText:(NSString *)passdTextToSearchFor{ NSManagedObject *searchObj; XYZAppDelegate *appDelegate = [[UIApplication sharedApplication] delegate]; NSManagedObjectContext *managedObjectContext = appDelegate.managedObjectContext; NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"name contains [cd] %@", passdTextToSearchFor]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Entry" inManagedObjectContext:managedObjectContext]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"name" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [request setEntity: entity]; [request setPredicate: predicate]; NSError *error; results = [managedObjectContext executeFetchRequest:request error:&error]; // NSLog(@"results %@", results); if([results count] == 0){ NSLog(@"No results found"); searchObj = nil; self.tempString = @"No results found."; }else{ if ([[[results objectAtIndex:0] name] caseInsensitiveCompare:passdTextToSearchFor] == 0) { NSLog(@"results %@", [[results objectAtIndex:0] name]); searchObj = [results objectAtIndex:0]; }else{ NSLog(@"No results found"); self.tempString = @"No results found."; searchObj = nil; } } [tableView reloadData]; [request release]; [sortDescriptors release]; return results; } - (void)searchBarSearchButtonClicked:(UISearchBar *)searchBar{ textToSearchFor = mySearchBar.text; results = [self SearchDatabaseForText:textToSearchFor]; self.tempString = [myGlobalSearchObject valueForKey:@"name"]; NSLog(@"results count: %d", [results count]); NSLog(@"results 0: %@", [[results objectAtIndex:0] name]); NSLog(@"results 1: %@", [[results objectAtIndex:1] name]); } @end Console prints: 2010-06-10 16:11:18.581 XYZApp[10140:207] results count: 2 2010-06-10 16:11:18.581 XYZApp[10140:207] results 0: BB Bugs 2010-06-10 16:11:18.582 XYZApp[10140:207] results 1: BB Annie Program received signal: “EXC_BAD_ACCESS”. (gdb) Edit 2: BT: #0 0x95a91edb in objc_msgSend () #1 0x03b1fe20 in ?? () #2 0x0043cd2a in -[UITableViewRowData(UITableViewRowDataPrivate) _updateNumSections] () #3 0x0043ca9e in -[UITableViewRowData invalidateAllSections] () #4 0x002fc82f in -[UITableView(_UITableViewPrivate) _updateRowData] () #5 0x002f7313 in -[UITableView noteNumberOfRowsChanged] () #6 0x00301500 in -[UITableView reloadData] () #7 0x00008623 in -[SearchViewController SearchDatabaseForText:] (self=0x3d16190, _cmd=0xf02b, passdTextToSearchFor=0x3b29630) #8 0x000086ad in -[SearchViewController searchBarSearchButtonClicked:] (self=0x3d16190, _cmd=0x16492cc, searchBar=0x3d2dc50) #9 0x0047ac13 in -[UISearchBar(UISearchBarStatic) _searchFieldReturnPressed] () #10 0x0031094e in -[UIControl(Deprecated) sendAction:toTarget:forEvent:] () #11 0x00312f76 in -[UIControl(Internal) _sendActionsForEventMask:withEvent:] () #12 0x0032613b in -[UIFieldEditor webView:shouldInsertText:replacingDOMRange:givenAction:] () #13 0x01d5a72d in __invoking___ () #14 0x01d5a618 in -[NSInvocation invoke] () #15 0x0273fc0a in SendDelegateMessage () #16 0x033168bf in -[_WebSafeForwarder forwardInvocation:] () #17 0x01d7e6f4 in ___forwarding___ () #18 0x01d5a6c2 in __forwarding_prep_0___ () #19 0x03320fd4 in WebEditorClient::shouldInsertText () #20 0x0279dfed in WebCore::Editor::shouldInsertText () #21 0x027b67a5 in WebCore::Editor::insertParagraphSeparator () #22 0x0279d662 in WebCore::EventHandler::defaultTextInputEventHandler () #23 0x0276cee6 in WebCore::EventTargetNode::defaultEventHandler () #24 0x0276cb70 in WebCore::EventTargetNode::dispatchGenericEvent () #25 0x0276c611 in WebCore::EventTargetNode::dispatchEvent () #26 0x0279d327 in WebCore::EventHandler::handleTextInputEvent () #27 0x0279d229 in WebCore::Editor::insertText () #28 0x03320f4d in -[WebHTMLView(WebNSTextInputSupport) insertText:] () #29 0x0279d0b4 in -[WAKResponder tryToPerform:with:] () #30 0x03320a33 in -[WebView(WebViewEditingActions) _performResponderOperation:with:] () #31 0x03320990 in -[WebView(WebViewEditingActions) insertText:] () #32 0x00408231 in -[UIWebDocumentView insertText:] () #33 0x003ccd31 in -[UIKeyboardImpl acceptWord:firstDelete:addString:] () #34 0x003d2c8c in -[UIKeyboardImpl addInputString:fromVariantKey:] () #35 0x004d1a00 in -[UIKeyboardLayoutStar sendStringAction:forKey:] () #36 0x004d0285 in -[UIKeyboardLayoutStar handleHardwareKeyDownFromSimulator:] () #37 0x002b5bcb in -[UIApplication handleEvent:withNewEvent:] () #38 0x002b067f in -[UIApplication sendEvent:] () #39 0x002b7061 in _UIApplicationHandleEvent () #40 0x02542d59 in PurpleEventCallback () #41 0x01d55b80 in CFRunLoopRunSpecific () #42 0x01d54c48 in CFRunLoopRunInMode () #43 0x02541615 in GSEventRunModal () #44 0x025416da in GSEventRun () #45 0x002b7faf in UIApplicationMain () #46 0x00002578 in main (argc=1, argv=0xbfffef5c) at /Users/default/Documents/iPhone Projects/XYZApp/main.m:14

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• form submitting with mechanize and Python

  - by MATELIN Alexis

  I'm trying to scrap a website that requires to submit two forms : a first one to loggin and a second one to specify my research. I'm using Python and the mechanize package. No problem with the first one, but i just can't figure out how to pass through the second one. Here is the part of my code related to the firm above-mentionned agemin=18 agemax=25 by='region' country='France' region=2 newcustomers=1 browser.select_form(nr=0) browser['age[min]']=agemin browser['age[max]']=agemax browser['country']=country browser['region']=region browser['by']=by browser['new-customers']=newcustomers response=browser.submit() content=response.read() but when I submit the variable 'age[min]' by example, I get the following error message : TypeError: object of type 'int' has no len() to give you some more informations, here is what I get with 'print br.form' <POST http://www.adopteunmec.com/qsearch/ajax_quick application/x-www-form-urlencoded <SelectControl(age[min]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, *30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(age[max]=[, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, *45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99])> <SelectControl(by=[*region, distance])> <SelectControl(country=[*fr, be, ch, ca])> <SelectControl(region=[*1, 2, 3, 4, 5, 6, 7, 8, 22, 23, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 11])> <SelectControl(distance[min]=[*, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <SelectControl(distance[max]=[, 0, 10, 20, 30, 40, 50, 60, 70, *80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, 300, 310, 320, 330, 340, 350, 360, 370, 380, 390, 400, 410, 420, 430, 440, 450, 460, 470, 480, 490, 500, 510, 520, 530, 540, 550, 560, 570, 580, 590, 600, 610, 620, 630, 640, 650, 660, 670, 680, 690, 700, 710, 720, 730, 740, 750, 760, 770, 780, 790, 800, 810, 820, 830, 840, 850, 860, 870, 880, 890, 900, 910, 920, 930, 940, 950, 960, 970, 980, 990, 1000])> <CheckboxControl(new=[*1])>> My guess is that the form needs an object (like a list) containing all the variables to accept it ; that's why it refuses the variables submited one by one. Thank you in advance for any help ! Alexis

  Read the article

• jquery intercept

  - by zurna

  In another question's discussion, I became aware of intercepting clicks and updating area without refreshing the whole page. Problem is, the following code seems correct to me and I dont receive any errors but data taken from another page is not displayed at all. Please advise. main page $('ul.thumbs li.pagination a').live('click', function() { var pageNumber = parseInt($(this).text().replace(/[^0-9]/g, '')); $(function ViewImages() { $.ajax({ type: "GET", url: "/FLPM/cp/images.cs.asp?Process=ViewImages&PAGEID=" + pageNumber, success: function(data) { $("#ViewImages").html(data); }, error: function (XMLHttpRequest, textStatus, errorThrown) { $("#ViewImages").html('.'); } }); }); return false; }); <div id="ViewImages"> </div> page where data lays <ul class="thumbs"> <li> <a href="#" class="thumb"><img src="/FLPM/media/news/images/5P2B4K5M_sm.jpg" alt="Forest Flowers" class="floatLeft" /></a> <br /> <a href="?Process=DeleteImage&IMAGEID=21" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a href="#" class="thumb"><img src="/FLPM/media/news/images/6Z3L5U6W_sm.jpg" alt="Forest" class="floatLeft" /></a> <br /> <a href="?Process=DeleteImage&IMAGEID=20" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a href="#" class="thumb"><img src="/FLPM/media/news/images/8O5A7J8M_sm.jpg" alt="Dock" class="floatLeft" /></a> <br /> <a href="?Process=DeleteImage&IMAGEID=19" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a href="#" class="thumb"><img src="/FLPM/media/news/images/9Q6B3Q4S_sm.jpg" alt="Desert Landscape" class="floatLeft" /></a> <br /> <a href="?Process=DeleteImage&IMAGEID=18" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a href="#" class="thumb"><img src="/FLPM/media/news/images/5B2N4W5Z_sm.jpg" alt="Creek" class="floatLeft" /></a> <br /> <a href="?Process=DeleteImage&IMAGEID=17" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li class="pagination">1.&nbsp;</li> <li class="pagination"><a href="2">2.</a>&nbsp;</li> </ul>

  Read the article

• cascading dropdown value doesn't seem to get posted to my php page?

  - by udaya

  i am using cascading dropdownlist for showing states of a country... I get the country dropdown value but not the state dropdown value.... I am populating state values via ajax... echo $country = $this->input->post('country'); echo $state = $this->input->post('state'); When inspected through firebug it shows all the option values of my state dropdown then why doesn't it get posted? <select onchange="getCity(1,this.value)" name="state"> <option value="0">Select State</option> <option value="1">Andhra Pradesh</option> <option value="2">Arunachal Pradesh</option> <option value="3">Assam</option> <option value="4">Bihar</option> <option value="5">Chandigarh</option> <option value="6">Chhattisgarh</option> <option value="7">Dadra and Nagar Haveli</option> <option value="8">Daman and Diu</option> <option value="9">Delhi</option> <option value="10">Goa</option> <option value="11">Gujarat</option> <option value="12">Haryana</option> <option value="13">Himachal Pradesh</option> <option value="14">Jammu and Kashmir</option> <option value="15">Jharkhand</option> <option value="16">Karnataka</option> <option value="17">Kerala</option> <option value="18">Lakshadweep</option> <option value="19">Madhya Pradesh</option> <option value="20">Maharashtra</option> <option value="21">Manipur</option> <option value="22">Meghalaya</option> <option value="23">Mizoram</option> <option value="24">Nagaland</option> <option value="25">Orissa</option> <option value="26">Puducherry</option> <option value="27">Punjab</option> <option value="28">Rajasthan</option> <option value="29">Sikkim</option> <option value="30">Tamil Nadu</option> <option value="31">Tripura</option> <option value="32">Uttar Pradesh</option> <option value="33">Uttarakhand</option> <option value="34">West Bengal</option> </select>

  Read the article

• Unicorn_init.sh cannot find app root on capistrano cold deploy

  - by oFca

  I am deploying Rails app and upon running cap deploy:cold I get the error saying * 2012-11-02 23:53:26 executing `deploy:migrate' * executing "cd /home/mr_deployer/apps/prjct_mngr/releases/20121102225224 && bundle exec rake RAILS_ENV=production db:migrate" servers: ["xxxxxxxxxx"] [xxxxxxxxxx] executing command command finished in 7464ms * 2012-11-02 23:53:34 executing `deploy:start' * executing "/etc/init.d/unicorn_prjct_mngr start" servers: ["xxxxxxxxxx"] [xxxxxxxxxx] executing command ** [out :: xxxxxxxxxx] /etc/init.d/unicorn_prjct_mngr: 33: cd: can't cd to /home/mr_deployer/apps/prjct_mngr/current; command finished in 694ms failed: "rvm_path=$HOME/.rvm/ $HOME/.rvm/bin/rvm-shell '1.9.3-p125@prjct_mngr' -c '/etc/init.d/unicorn_prjct_mngr start'" on xxxxxxxxxx but my app root is there! Why can't it find it? Here's part of my unicorn_init.sh file : 1 #!/bin/sh 2 set -e 3 # Example init script, this can be used with nginx, too, 4 # since nginx and unicorn accept the same signals 5 6 # Feel free to change any of the following variables for your app: 7 TIMEOUT=${TIMEOUT-60} 8 APP_ROOT=/home/mr_deployer/apps/prjct_mngr/current 9 PID=$APP_ROOT/tmp/pids/unicorn.pid 10 CMD="cd $APP_ROOT; bundle exec unicorn -D -c $APP_ROOT/config/unicorn.rb - E production" 11 # INIT_CONF=$APP_ROOT/config/init.conf 12 AS_USER=mr_deployer 13 action="$1" 14 set -u 15 16 # test -f "$INIT_CONF" && . $INIT_CONF 17 18 old_pid="$PID.oldbin" 19 20 cd $APP_ROOT || exit 1 21 22 sig () { 23 test -s "$PID" && kill -$1 `cat $PID` 24 } 25 26 oldsig () { 27 test -s $old_pid && kill -$1 `cat $old_pid` 28 } 29 case $action in 30 31 start) 32 sig 0 && echo >&2 "Already running" && exit 0 33 $CMD 34 ;; 35 36 stop) 37 sig QUIT && exit 0 38 echo >&2 "Not running" 39 ;; 40 41 force-stop) 42 sig TERM && exit 0 43 echo >&2 "Not running" 44 ;; 45 46 restart|reload) 47 sig HUP && echo reloaded OK && exit 0 48 echo >&2 "Couldn't reload, starting '$CMD' instead" 49 $CMD 50 ;; 51 52 upgrade) 53 if sig USR2 && sleep 2 && sig 0 && oldsig QUIT 54 then 55 n=$TIMEOUT 56 while test -s $old_pid && test $n -ge 0 57 do 58 printf '.' && sleep 1 && n=$(( $n - 1 )) 59 done 60 echo 61 62 if test $n -lt 0 && test -s $old_pid 63 then 64 echo >&2 "$old_pid still exists after $TIMEOUT seconds" 65 exit 1 66 fi 67 exit 0 68 fi 69 echo >&2 "Couldn't upgrade, starting '$CMD' instead" 70 $CMD 71 ;; 72 73 reopen-logs) 74 sig USR1 75 ;; 76 77 *) 78 echo >&2 "Usage: $0 <start|stop|restart|upgrade|force-stop|reopen-logs>" 79 exit 1 80 ;; 81 esac

  Read the article

• When Clearing an ObservableCollection, There are No Items in e.OldItems

  - by cplotts

  I have something here that is really catching me off guard. I have an ObservableCollection of T that is filled with items. I also have an event handler attached to the CollectionChanged event. When you Clear the collection it causes an CollectionChanged event with e.Action set to NotifyCollectionChangedAction.Reset. Ok, that's normal. But what is weird is that neither e.OldItems or e.NewItems has anything in it. I would expect e.OldItems to be filled with all items that were removed from the collection. Has anyone else seen this? And if so, how have they gotten around it? Some background: I am using the CollectionChanged event to attach and detach from another event and thus if I don't get any items in e.OldItems ... I won't be able to detach from that event. CLARIFICATION: I do know that the documentation doesn't outright state that it has to behave this way. But for every other action, it is notifying me of what it has done. So, my assumption is that it would tell me ... in the case of Clear/Reset as well. Below is the sample code if you wish to reproduce it yourself. First off the xaml: <Window x:Class="ObservableCollection.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300" > <StackPanel> <Button x:Name="addButton" Content="Add" Width="100" Height="25" Margin="10" Click="addButton_Click"/> <Button x:Name="moveButton" Content="Move" Width="100" Height="25" Margin="10" Click="moveButton_Click"/> <Button x:Name="removeButton" Content="Remove" Width="100" Height="25" Margin="10" Click="removeButton_Click"/> <Button x:Name="replaceButton" Content="Replace" Width="100" Height="25" Margin="10" Click="replaceButton_Click"/> <Button x:Name="resetButton" Content="Reset" Width="100" Height="25" Margin="10" Click="resetButton_Click"/> </StackPanel> </Window> Next, the code behind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Collections.ObjectModel; namespace ObservableCollection { /// <summary> /// Interaction logic for Window1.xaml /// </summary> public partial class Window1 : Window { public Window1() { InitializeComponent(); _integerObservableCollection.CollectionChanged += new System.Collections.Specialized.NotifyCollectionChangedEventHandler(_integerObservableCollection_CollectionChanged); } private void _integerObservableCollection_CollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) { switch (e.Action) { case System.Collections.Specialized.NotifyCollectionChangedAction.Add: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Move: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Remove: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Replace: break; case System.Collections.Specialized.NotifyCollectionChangedAction.Reset: break; default: break; } } private void addButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Add(25); } private void moveButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Move(0, 19); } private void removeButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.RemoveAt(0); } private void replaceButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection[0] = 50; } private void resetButton_Click(object sender, RoutedEventArgs e) { _integerObservableCollection.Clear(); } private ObservableCollection<int> _integerObservableCollection = new ObservableCollection<int> { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }; } }

  Read the article

• inserting new relationship data in core-data

  - by michael

  My app will allow users to create a personalised list of events from a large list of events. I have a table view which simply displays these events, tapping on one of them takes the user to the event details view, which has a button "add to my events". In this detailed view I own the original event object, retrieved via an NSFetchedResultsController and passed to the detailed view (via a table cell, the same as the core data recipes sample). I have no trouble retrieving/displaying information from this "event". I am then trying to add it to the list of MyEvents represented by a one to many (inverse) relationship: This code: NSManagedObjectContext *context = [event managedObjectContext]; MyEvents *myEvents = (MyEvents *)[NSEntityDescription insertNewObjectForEntityForName:@"MyEvents" inManagedObjectContext:context]; [myEvents addEventObject:event];//ERROR And this code (suggested below): //would this add to or overwrite the "list" i am attempting to maintain NSManagedObjectContext *context = [event managedObjectContext]; MyEvents *myEvents = (MyEvents *)[NSEntityDescription insertNewObjectForEntityForName:@"MyEvents" inManagedObjectContext:context]; NSMutableSet *myEvent = [myEvents mutableSetValueForKey:@"event"]; [myEvent addObject:event]; //ERROR Bot produce (at the line indicated by //ERROR): *** -[NSComparisonPredicate evaluateWithObject:]: message sent to deallocated instance Seems I may have missed something fundamental. I cant glean any more information through the use of debugging tools, with my knowledge of them. 1) Is this a valid way to compile and store an editable list like this? 2) Is there a better way? 3) What could possibly be the deallocated instance in error? -- I have now modified the Event entity to have a to-many relationship called "myEvents" which referrers to itself. I can add Events to this fine, and logging the object shows the correct memory addresses appearing for the relationship after a [event addMyEventObject:event];. The same failure happens right after this however. I am still at a loss to understand what is going wrong. This is the backtrace #0 0x01f753a7 in ___forwarding___ () #1 0x01f516c2 in __forwarding_prep_0___ () #2 0x01c5aa8f in -[NSFetchedResultsController(PrivateMethods) _preprocessUpdatedObjects:insertsInfo:deletesInfo:updatesInfo:sectionsWithDeletes:newSectionNames:treatAsRefreshes:] () #3 0x01c5d63b in -[NSFetchedResultsController(PrivateMethods) _managedObjectContextDidChange:] () #4 0x0002e63a in _nsnote_callback () #5 0x01f40005 in _CFXNotificationPostNotification () #6 0x0002bef0 in -[NSNotificationCenter postNotificationName:object:userInfo:] () #7 0x01bbe17d in -[NSManagedObjectContext(_NSInternalNotificationHandling) _postObjectsDidChangeNotificationWithUserInfo:] () #8 0x01c1d763 in -[NSManagedObjectContext(_NSInternalChangeProcessing) _createAndPostChangeNotification:withDeletions:withUpdates:withRefreshes:] () #9 0x01ba25ea in -[NSManagedObjectContext(_NSInternalChangeProcessing) _processRecentChanges:] () #10 0x01bdfb3a in -[NSManagedObjectContext processPendingChanges] () #11 0x01bd0957 in _performRunLoopAction () #12 0x01f4d252 in __CFRunLoopDoObservers () #13 0x01f4c65f in CFRunLoopRunSpecific () #14 0x01f4bc48 in CFRunLoopRunInMode () #15 0x0273878d in GSEventRunModal () #16 0x02738852 in GSEventRun () #17 0x002ba003 in UIApplicationMain () solution I managed to get to the bottom of this. I was fetching the event in question using a NSFetchedResultsController with a NSPredicate which I was releasing after I had the results. Retrieving values from the entities returned was no problem, but when I tried to update any of them it gave the error above. It should not have been released. oustanding part of my question What is a good way to create this sub list from a list of existing items in terms of a core data model. I don't believe its any of the ways I tried here. I need to show/edit it in another table view. Perhaps there is a better way than a boolean property on each event entity? The relationship idea above doesn't seem to work here (even though I can now create it). Cheers.

  Read the article

• What can I do to enhance MacBook Pro internal mic sound quality in iMovie?

  - by gaearon

  After using MacBook for two years, I bought 17'' MacBook Pro. I'm pretty happy with it, performance and all, but I also was going to record some music videos for YouTube. I play guitar and sing. However I was extremely disappointed with the sound quality that comes by default. I'm 100% sure my 13'' MacBook mic was much better at recording music and singing. Currently mic can't event handle acoustic guitar, outputting sound you'd think was recorded 5 years ago in ARM format on a Nokia phone on a loud concert. It totally feels like some lame filter is cutting low and high frequencies. I want to know what settings (visible or hidden) in iMovie or Mac OS itself I might want to tweak in order to get my MBP mic record clean sound.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >