Search Results

Search found 4860 results on 195 pages for 'sudo petruza'.

Page 154/195 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• What is the proper way to install the 3.4 kernel?

  - by Marcelo Ruiz

  Kernel 3.2 has an annoying error for my wireless card (rtl8192se-b) that makes the connection drop and/or prevents the card to make a connection to the wireless router. Dealing with it was very frustrating until I found out the bug was corrected in 3.4. I downloaded: linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb and installed with: sudo dpkg -i * Now the wireless works fine, but I have two problems that cannot solve. The first one is minor: plymouth would not start at all. But if I boot with the 3.2 kernel it works fine. The second one is serious: sometimes the computer won't shut down or reboot. The X server terminates but the computer shows part of my grub background and will stay there forever using 100% of the CPU. I have a Toshiba Qosmio with an Core i7 and nvidia graphic card (using nvidia-current). During one shutdown, I briefly read a message that said that the virtualbox module couldn't be unloaded from the kernel. I tried to solve this by removing and purging virtualbox and installing it back. I don't see the message anymore, but sometimes the computer won't shutdown nor reboot. Am I missing something to properly configure the new kernels? Thanks!

  Read the article

• Screen flickering when using midrange brightness values on Dell XPS

  - by Eliran Malka

  After a fresh Ubuntu install on my laptop, I discovered the function keys for screen brightness control (Fn+F4 and Fn+F5) are not working. Digging around here, I managed to get it to work by following the solution suggested on this post and that one, but alas — after applying it, a strange problem occurred: Setting the brightness level to any value other than minimum or maximum, the screen starts flickering back and forth from the selected level to full brightness, apparently due to Dell's power saver attempting to dim the screen to adjust the brightness levels. I looked up for a solution here on the site, and possibly everywhere, with no avail. Also tried: To manually control the brightness by configuring the ACPI level (setting values by echo [some_value] | sudo tee /sys/class/backlight/[vendor]_backlight/[some_key], without success. Installing the Intel graphics driver, thinking it's missing. Realized it's installed out of the box by installing Mesa Utils. How to resolve this? Environment Model: Dell Studio XPS 13 OS: Windows 7 64bit / Ubuntu 12.04 32bit (dual boot) Graphics Driver: Intel HD 3000 (Sandybridge Mobile x86/MMX/SSE2) lshw -C display output: *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:2000(size=64)

  Read the article

• Automatic TRIM vs. manual TRIM

  - by Eike Cochu

  I am currently trying to find out how to trim with my new TP and was wondering about the difference of manual/online trimming. Here is my setup: ThinkPad T430s with SSD Samsung 830, 128GB and Xubuntu 12.10, here are some outputs to check if trim will work on my system (got these from here: http://wiki.ubuntuusers.de/SSD/TRIM) root@eike-tp:~# sudo hdparm -I /dev/sda | grep -i TRIM * Data Set Management TRIM supported (limit 8 blocks) First, I tried the online trimming: How to enable TRIM? my fstab with discard inserted: UUID=d6c49c17-a4f1-466c-9f7e-896c20db3bba / ext4 discard,noatime,errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=a0322f5f-c6c1-4896-863f-668f0638d8cf none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 I tried to test if it works (but I don't get any zeroes when I try it with /dev/sda), but found out that this method is only possible with SSD type 2 and I seem to have type 3. So I don't know if it works or not. The Ubuntuwiki (first link) recommends manual trimming, so I set up a daily cronjob instead of discard: #!/bin/sh LOG=/var/log/batched_discard.log echo "*** $(date -R) ***" >> $LOG fstrim -v / >> $LOG the wiki article suggests weekly or daily. Now to my questions: How often executes the automated trim? How often is recommended? Online vs. manual trimming? Thank you for your help

  Read the article

• 10.10 boots to command line login prompt

  - by greggory.hz

  I recently installed Ubuntu 10.10 on a computer that was previously running 10.04 (that worked fine). Now, each time I boot up, it starts up in a command line login prompt. I can login and it stays at the command line (as expected). I can then manually start gdm with sudo start gdm and it works fine. I can also enable compiz (using proprietary nvidia drivers) so I'm reasonably confident that it's not a driver problem (at least not in the sense that the drivers just flat out aren't working). Interestingly, if I leave it at the command prompt without logging in, after about 5 or 10 minutes, gnome starts up on its own. I'm not sure what is causing this. This is what dmesg | tail gives me after a manual start of gdm: [ 15.664166] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.18 Tue Jan 18 21:46:26 PST 2011 [ 15.991304] type=1400 audit(1297543976.953:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=990 comm="apparmor_parser" [ 16.606986] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.798506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 26.740010] eth0: no IPv6 routers present [ 90.444593] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 189.252208] audit_printk_skb: 21 callbacks suppressed [ 189.252213] type=1400 audit(1297544150.218:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser" [ 189.252584] type=1400 audit(1297544150.218:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser" [ 351.159585] lo: Disabled Privacy Extensions

  Read the article

• Windows 7 disappeared in list of Grub while loading

  - by Riyad A.

  Installed Ubuntu 12.04 alongside the Windows 7 two weeks ago. Initially haven't any issues with that. day ago installed updates on Ubuntu and after restarting the system found the absence of Win7 in Grub list. Before the HDD has been partitioned on two volumes Disk C and Work Disk(don't remember the name). When doing the fdisk -l: Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xa93031e0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 408833842 204415897+ 7 HPFS/NTFS/exFAT /dev/sda2 488386560 976773119 244193280 7 HPFS/NTFS/exFAT /dev/sda3 408834046 488386559 39776257 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 408834048 484421631 37793792 83 Linux /dev/sda6 484423680 488386559 1981440 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk0p1 8192 7744511 3868160 b W95 FAT32 When sudo mount /dev/sda ~/1 -o offset [488386560*512] - opens and mounts WORK disk. Need help: how to See and mount disk C. how to see and adjust the Grub to appear both systems in Grub menu when loading?

  Read the article

• How can a usb be detected but not show up anywhere?

  - by George Mauer

  I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

  Read the article

• Mounting an encrypted partion Error

  - by indiajoe

  Using the disk utilities in ubuntu 11.04, i had encrypted a partition with a passphrase. Each time i used to click on the partition to mount, it used to ask me the passphrase and get mounted. All was fine, until i installed the 12.04. After the installation, this encrypted partition, disappeared from the menu. fdisk -l /dev/sda Shows the encrypted partition in the list /dev/sda7 298953648 488392064 94719208+ 7 HPFS/NTFS/exFAT I tried the following commands to mount it. But they all gave following errors $ sudo cryptsetup luksDump /dev/sda7 Device /dev/sda7 is not a valid LUKS device. $ ecryptfs-unwrap-passphrase /dev/sda7 Passphrase: # i entered the correct passphrase here... Error: Unwrapping passphrase failed [-5] Info: Check the system log for more information from libecryptfs $ grep ecryptfs /var/log/syslog Oct 31 22:43:51 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading Nov 1 01:28:02 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading Nov 1 01:29:06 benny ecryptfs-unwrap-passphrase: Error attempting to open [/dev/sda7] for reading I don't understand why I am getting the "Device /dev/sda7 is not a valid LUKS device." Could it be due to some corruption in partition table? Is there any way to recover this encrypted partition? Thanks indiajoe

  Read the article

• Cron: job starts but doesn't complete

  - by Guandalino

  I have a problem with a cron job which starts but doesn't complete. Running the command manually works fine. I already read the page about cron issues and solutions here on AskUbuntu, tried the proposed solutions but didn't find an answer working in my case. I'm using Ubuntu 12.04. $ crontab -e SHELL=/bin/bash # otherwise it would be /bin/sh 59 16 * * * /bin/duply calendar backup > /tmp/duply.log Btw, the cron file ends with an empty line, as someone pointed out. Once the job has "finished"...: $ cat /tmp/duply.log Start duply v1.5.7, time is 2012-06-22 16:59:01. Instead, running manually the script it works correctly and gives this output: Start duply v1.5.7, time is 2012-06-22 17:06:39. [cut] ... here is a long output generated by duply. ... and yes, files have been backed up. [cut] --- Finished state OK at 17:06:42.581 - Runtime 00:00:03.170 --- I also tried to restart the cron daemon (sudo service cron restart) but nothing changed. Do you have any suggestion to fix the issue?

  Read the article

• How do I install a Wimax usb driver?

  - by kakaz

  I am using wimax usb modem in Ubuntu 9.04 properly. I am familiar with Ubuntu 10.04 and try to install the same deb file to use my wimax USB modem, but it could not install and give me the following error message: $ sudo dpkg -i green-packet-wimax-usb_i386.iso.deb (Reading database ... 206628 files and directories currently installed.) Preparing to replace green-packet-wimax-usb 1.12 (using green-packet-wimax- usb_i386.iso.deb) ... /var/lib/dpkg/info/green-packet-wimax-usb.prerm: 45: /etc/init.d/wimaxd: not found Removing any system startup links for /etc/init.d/wimaxd ... FATAL: Module mt7118_usb_os not found. Unpacking replacement green-packet-wimax-usb ... Setting up green-packet-wimax-usb (1.12) ... FATAL: Error inserting mt7118_usb_glue (/lib/modules/2.6.32-28-generic/kernel/drivers/net/mt7118_usb_glue.ko): Invalid module format dpkg: error processing green-packet-wimax-usb (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for ureadahead ... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.utf8.cache... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for python-support ... Errors were encountered while processing: The error (Line 9) give me some clue that the mt7118_usb_glue.ko kernel object can't insert it. So, I think this may be due to it's kernel dependencies. Can anybody tell me how I can install this kernel object to my new Ubuntu 10.04 kernel?

  Read the article

• please help me understand libraries/includes

  - by fiftyeight

  I'm trying to understand how libraries work. for example I downloaded a tarball and extracted it. Now I do "./configure", it searches in pre-defined directories from what I understand for certain library files. What does it do then? it creates a makefile, and the makefile contains the paths to these libraries? than I do "make", it complies the source code and hard-codes the locations of the libraries? am I correct? I do not really understand if libraries are files with pre-defined paths or the OS somehow gives access to the libraries through system calls. another example, I complied something on my computer than moved it to a remote server, the executable needs mysql libraries to work, the server has mysql but for some reason when execute the file it tells me "can't find libmysqlclient.so.16". is there a solution for this? is there a way to know where is tries to locate this file or give it another path? I can't compile it on the server since it has no compiler and I don't have root access to install packages last question is if in the sequence "./configure","make","make install" the "make install" command is the only one that actually puts files outside the directory in which these files reside? if for example the software will be installed in /usr/local/ is the "make install" command the only one that will require "sudo" before it? let me see if I got it correctly: "./configure" creates the Makefile according to the location of various files on your system. "make" compiles the source code according to this makefile. and "make install" moves the files to their appropriate location. I know this has been very long I thank anyone who had the patience to read my question :)

  Read the article

• Trying to migrate Windows 7 install of Adobe CS5 to Ubuntu 12.04 with Wine - 'Internal errors - invalid paramters received"

  - by Don

  I have Adobe CS5 installed and running on the Windows 7 side of my machine. Since I'd hate to boot up into Windows just to use Photoshop, I'm trying to get it in Ubuntu 12.04. Tutorials I found suggested that the easiest way to have it in Ubuntu was to install Wine, and copy my Windows installation over. Here are the exact steps I've done up to this point. From Windows, exported the registry key for HKEY_LOCAL_MACHINE SOFTWARE Adobe to the desktop. Changed to Ubuntu, downloaded Wine from Software Center Terminal: $ sudo apt-get install wine ttf-mscorefonts-installer $ winecfg $ wget http://www.kegel.com/wine/winetricks $ sh winetricks msxml6 gdiplus gecko vcrun2005sp1 vcrun2008 msxml3 atmlib Moved registry export to home folder. Copied "Program Files (x86)\Adobe" to "~/.wine/drive_c/Program Files (x86)/Adobe" "Program Files (x86)\Common Files\Adobe" to "~/.wine/drive_c/Program Files (x86)/Common Files/Adobe" "Documents and Settings\Don\Application Data\Adobe" to "~/.wine/drive_c/users/don/Application Data/Adobe" "Windows\System32\odbcint.dll" to "~/.wine/drive_c/windows/system32/odbcint.dll" ,and lastly "Windows\System32\odbc32.dll" to "~/.wine/drive_c/windows/system32/odbc32.dll". From Terminal, $ wine regedit adobe.reg. Right clicked on Photoshop.exe and selected "Open with Wine". Got the message "Wine Program Crash, Internal errors - invalid parameters received." So to restate my question, How can I get Photoshop running in Ubuntu 12.04? I'm not sold on doing it in this specific way, I just want to use Photoshop without having to reboot. What's the best way to make this happen? Edit: I do not have the installation CD, no.

  Read the article

• 12.10 wants to install multiarch :i386-packages

  - by gspr

  I have an AMD64 system without any i386 multiarch packages. After successfully upgrading to 12.10, aptitude seems to want to install a few, and I can't tell why: $ sudo aptitude safe-upgrade Resolving dependencies... The following NEW packages will be installed: gcc-4.7-base:i386{a} libarmadillo3{a} libboost-date-time1.49-dev{a} libboost-serialization1.49-dev{a} libboost-serialization1.49.0{a} libboost-thread1.49-dev{a} libboost1.49-dev{a} libc6:i386{a} libgcc1:i386{a} libgdal1{a} libhdf5-7{a} libltdl7:i386{a} libnetcdfc7{a} libodbc1:i386{a} libreadline6:i386{a} libtinfo5:i386{a} odbcinst1debian2:i386{a} unixodbc:i386{a} Why libc6:i386, for example? I ask.. $ aptitude why libc6:i386 p icoutils:i386 Provides icoutils p icoutils:i386 Depends libc6:i386 (>= 2.8) ... alright, but why icoutils:i386? $ aptitude why icoutils:i386 p icoutils:i386 Provides icoutils But I already have the AMD64 version of icoutils: $ aptitude search icoutils i icoutils - Create and extract MS Windows icons and cursors p icoutils:i386 - Create and extract MS Windows icons and cursors Has some multiarch behavior changed recently, or am I just overlooking something? Addendum: Chasing down from gcc-4.7-base:i386, I'm led to qdbus:i386, which is up for installation since it provides qdbus... which I already have.

  Read the article

• Stuck With grub rescue> console

  - by rej santos

  Here is the background of my issue: I just recently installed the latest version of Ubuntu along side with Windows 8 Enterprise. However upon checking the disk size, it seems that some of the portions of the hd memory were gone so I decided to check the disk partition and have seen that is was being used by another file system. Thinking that the Ubuntu takes it boots stuff from my drive C: , I deleted that partition and formated so I can use it to store some movies, music etc. Now, as I switch on my machine, I am stucked with: error: unknown filesystem grub rescue> I googled a lot and saw the following command which seems no to me like sudo, chainloader etc, all of these command only returns unknown command in the console. What I just wanted is to boot from my Windows 8 OS. Just to add, I can't open the BIOS menu so I could choose what media to boot. As I open my machine it automatically takes me to grub rescue console. Here are the thing I already have: Ubuntu Installation Disk Windows 8 System repair Disk I just don't know how to boot into these things. Let me know what to do.

  Read the article

• apt-get update very slow, stuck at "Waiting for headers"

  - by Liam

  I have looked at similar questions: Stuck at 0% [waiting for headers] (apt) apt-get update stuck on "Waiting for Headers" However neither one of them answer my problem. I am running 12.04 AMD64 and have recently started getting an issue that when I update my repos from my connection at home through a terminal, using sudo apt-get update, it takes forever (literally after 2 hours it was at 28%), however when I run from a different location it takes less than 5 minutes to complete. I have attempted changing which mirror I use but that does not solve the issue. I have also cut down what is in my sources list but this also makes no difference. There are no faults on my ADSL line as I have already contacted my ISP to check this. It also makes no difference if I use a WiFi or network cable connection. What could be my issue? A speed test (www.speedtest.net) comes out at about 0.9 Mbps down and 0.42 Mbps up (which is a shade under the advertised line speed), I reside in South Africa and use the UCT LEG server. But I have also tried the other mirrors available in SA....none of them make a difference.

  Read the article

• Unity not running on startup

  - by Dan

  OK, so Firefox was running extremely slow, I ran it in safe mode and still slow, so I rebooted and when she came back on, I wasn't at the regular Unity login, it was like a classic Windows login (where I had to enter my username and password manually, not a list of users). I logged in and only my desktop was visible (with icons and my wallpaper). Nothing else. I was able to open a terminal with Ctrl+ Alt+T and typed... sudo unity ...which got it up (albeit with the default icons on the launcher ex. I had unlocked Libre Office and it was back). In "Startup Applications..." there was absolutely nothing at all... This happens every time I reboot. Thunderbird de-synced from my Gmail but Pidgin is still connected. When I do Ctrl+Alt+L it locks the screen as normal, but I have no option to switch user. I have the only account on this computer but I cannot access the main login screen to get to my Guest account. I'm not very Ubuntu-savy, but it's pretty clear that I'm starting in some sort of safemode. I am on a fresh install of Ubuntu 12.04.1 LTS (just installed it last night).

  Read the article

• Problems installing Ubuntu on a vaio with SSD, GRUB installation failure

  - by Alberto

  I have installed and used Ubuntu in several computers. But now I have a problem that I don't know how to solve. I have a Vaio (Product name: vpcz13c5e), it has a SSD 128gb. I decided to install Ubuntu (12.04, but I have tried older versions as well). Firstly, I tested with live USB, and everything was fine, so I decided go for the complete installation. Then everything went as follows: I chose to use the whole disk (first option, formatting everything). I got a message Executing 'grub-install' /deb/sdb failed. This is a fatal error After clicking ok I got another window with 3 options: the first offers different devices to install the bootloader on (I tried all of them and none works). Second option: Continue without a bootloader. In that case I got You will need to manually install a bootloader in order to start Ubuntu The third option is Cancel the installation. So, I chose Continue without a bootloader. Then I restart the computer (with the Live cd) and in a terminal type sudo fdisk -l but I obtain fdisk: unable to seek on /dev/sda: Invalid argument What can I do? any help will be appreciated.

  Read the article

• Diablo 3 "freezes" periodically

  - by Shauna

  I'm running Diablo 3 (start edition, digital download) on the following: Ubuntu 12.04 64-bit (stock Unity, Gnome, etc; kernel version 3.2.0-29-generic) Wine version 1.5.11 (base, from Wine's PPA, game started with setarch i386 -3) Intel i7 920 CPU nVidia GTX260 with driver version 295.49 ("post-release updates" entry within the proprietary drivers tool), dual monitors 6GB RAM Every so often (and what appears to be at random), the game video will freeze up. I can still move the mouse, and it reacts to ctrl+alt+f2 to drop into text mode, but I can't get back to the desktop (which means I can check terminal to see what's going on after launching from terminal, especially since even in windowed mode, the secondary screen gets shut off by the game), and I can't continue to play the game. In order to get it running again, I have to restart lightdm, then relaunch the game (or, in a couple of rare cases, I had to restart the computer entirely, because running sudo service lightdmn [stop/start] doesn't appear to react). Turning down the video settings seems to have helped in some cases, but not all of them. Times it's frozen on me: The beginning of The Fallen Start quest part 6 - kill the Wretched Mother, right as you walk out of New Tristram and engage in the monsters on the northern path (repeatedly froze here until I adjusted the graphics down) Within the cinematic/event upon finding Deckard Cain While fighting the skeletons to protect Deckard Cain When about to enter Leoric's passage after Cain sends you back to where you found him That's as far as I've gotten through the game so far. Additionally, this doesn't happen on other games I play and seems to only occur with Diablo 3. Has anyone else run into this issue and know a possible cause or fix, or at least know where I can look (and what to look for) to figure out why this is happening?

  Read the article

• How to install rgdal on Ubuntu 12.10?

  - by radek

  I'm strugling to install rgdal library on Ubuntu 12.10. Installation from within R results in error: Error: gdal-config not found The gdal-config script distributed with GDAL could not be found. If you have not installed the GDAL libraries, you can download the source from http://www.gdal.org/ If you have installed the GDAL libraries, then make sure that gdal-config is in your path. Try typing gdal-config at a shell prompt and see if it runs. If not, use: --configure-args='--with-gdal-config=/usr/local/bin/gdal-config' with appropriate values for your installation. ERROR: configuration failed for package ‘rgdal’ * removing ‘/home/rdk/R/x86_64-pc-linux-gnu-library/2.15/rgdal’ Warning in install.packages : installation of package ‘rgdal’ had non-zero exit status R-sig-Geo, this two SE questions and other websites pointed me to the requirements of libgdal1-dev. But when I tried sudo apt-get install libgdal1-dev I end up with another error message Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libgdal1-dev : Depends: libgdal-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. Again - when I try to install libgdal-dev another dependencies error shows up The following packages have unmet dependencies: libgdal-dev : Depends: libgeos-dev but it is not going to be installed Depends: libspatialite-dev but it is not going to be installed Again trying libgeos-dev gives message: Depends: libgeos-c1 (= 3.3.3-1.1) but 3.3.3-2~precise2 is to be installed E: Unable to correct problems, you have held broken packages. and libspatialite-dev: Depends: libspatialite3 (= 3.1.0~rc2-1ubuntu1) but 3.1.0~rc2-2~precise1 is to be installed Is there any way to tame those dependencies and have rgdal running in Ubuntu? My sessionInfo() R version 2.15.1 (2012-06-22) Platform: x86_64-pc-linux-gnu (64-bit)

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• What's wrong with my ext4 partition?

  - by bumbling fool

  What is wrong with this picture? Top is output from "df -h", bottom is gparted. I suspect I'm missing a lot of free space. No problems other than that (yet). Can somebody suggest the best (non-destructive) way to correct this? sudo dumpe2fs -h /dev/sda3: (source http://pastebin.com/nAvrdT4E) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 9f6eff64-60d7-4eec-81d5-1e8acd818b38 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 1602496 Block count: 6406144 Reserved block count: 320306 Free blocks: 4842284 Free inodes: 1361222 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1022 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8176 Inode blocks per group: 511 RAID stride: 32692 Flex block group size: 16 Filesystem created: Sun Nov 8 18:18:13 2009 Last mount time: Tue Mar 1 01:04:27 2011 Last write time: Mon Feb 28 04:27:34 2011 Mount count: 16 Maximum mount count: 28 Last checked: Thu Feb 24 06:23:39 2011 Check interval: 15552000 (6 months) Next check after: Tue Aug 23 07:23:39 2011 Lifetime writes: 227 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 268015 Default directory hash: half_md4 Directory Hash Seed: cc101517-e617-482b-a883-a72919419c84 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x001d3000 Journal start: 7787 fdisk and parted output per requests: http://pastebin.com/EGVH7Ken

  Read the article

• KVM not installed?

  - by NJRandy

  When I run virt-manager, and click on the icon to create a new virtual machine, I get an error that KVM is not installed or is not loaded. I use Ubuntu GNOME 14.04 All qemu packages are version 2.0.0+dfsg-2ubuntu1 qemu-kvm and many other qemu packages installed... libvirt packages: 1.2.2-0ubuntu13.1 libvirt0 libvirt-bin libvirt-doc python-libvirt virt-manager 0.9.5-1ubuntu3 When I open terminal and enter lsmod | grep kvm I get nothing returned. No lines showing kvm or kvm_amd and no error of any kind. Hardware: Tyan S2877 with dual Opteron 285s I have the latest bios and don't see any setting in there to turn virtualization on or off. when I run sudo apt-get -s install qemu-kvm Here are the results: Reading package lists... Done Building dependency tree Reading state information... Done qemu-kvm is already the newest version. The following packages were automatically installed and are no longer required: kde-l10n-engb libgtk2-gladexml-perl libqt4-test libvncserver0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. @jobin: the problem was my hardware. I just bought it a few months ago, although obviously used LOL

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

• How to install Ubuntu 13.10 on Hybrid Disk alongside Windows 8.1

  - by user205691

  I am having trouble installing Ubuntu 13.10 on HP Envy 4-1046tx ultrabook. When i bought this, it came with windows 7 pre-installed, but i upgraded it to 8 and now recently to 8.1. But somehow, i feel 8.1 is slower or something went wrong with the upgrade and made my system slow. I want to try Dual booting Ubuntu 13.10 with windows 8.1 The system recovery drive has windows 7 recovery files. SSD has 4GB allocated to windows 8 (i think for hibernation/rapid start). 25GB of SSD is free and i want to install ubuntu on this SSD pointing it to "/" I will also shrink the windows partition (the only other partition available apart from recovery & SSD) to free up 100GB and allocate this space to "/home" during ubuntu installation. I tried the above steps while on windows 8, but not successful. Ubuntu installation went fine, but the grub was not loaded. I tried to deploy linux via EasyBCD, but after that also, selecting linux in the boot would load grub on command prompt and do nothing. While ubuntu installation, i also deleted the raid drivers with sudo dmraid -rE, but still ubuntu didnt recognize my windows. I think i am missing some steps, so this time i want to do it right with proper info before starting the process. My requirements: dual boot Ubuntu with windows 8.1 c:\ shrinked windows with 300GB on sda1, 100GB for /home on sda1 & ubuntu installed on 25GB SSD volume sda2 (this is mSata i think) GRUB or EFI that helps me load both OS properly without breaking anything SWAP partition can be added if needed on sda1 (4gb?)? I have backed up my drive and have a 16GB usb3.0 with ubuntu loaded. I hope i have mentioned everything i need and know.. All i need now is some guidance and what to do right so that this installation goes as planned :)

  Read the article

• nvidia graphics resolution problem

  - by Deepak Adhikari

  I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

  Read the article

• Am I misunderstanding chown and chmod?

  - by isomorphismes

  I want to either extend the size of my guest partition or figure out how to copy stuff from the guest partition to my normal /home directory. (Because of some other problems I can only run Xorg as guest, but I can log into virtual console as myself or root.) Here's the motivation: I want to torrent a large file. It's larger than my guest filesystem. But I have plenty of space on my real drive, I just can't log into it graphically. So I tried to set up a "pipe" to get the file out of the tmpfs. I did: su -u myself #catch mkdir ~/receiver_dir sudo su cd /tmp/guest-lkj567UIO/ #throw ln -s mario_pipe /home/myself/receiver_dir chown -R guest-lkj567UIO /home/myself/receiver_dir chown -R guest-lkj567UIO /tmp/guest-lkj567UIO/mario_pipe chmod -R a+rw /home/myself/receiver_dir chmod -R a+rw /tmp/guest-lkj567UIO/mario_pipe su -u guest-lkj567UIO cd /tmp/guest-lkj567UIO cd mario_pipe touch something #success! However, when I try to torrent to /tmp/guest-lkj567UIO/mario_pipe, Transmission says I don't have write permissions. But it looks like I just wrote there? And that everybody (a+rw) can write there in fact? Maybe this indicates I don't actually understand chown and chmod but nothing from their man pages pops out.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >