Search Results

Search found 16801 results on 673 pages for 'task manager'.

Page 154/673 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Valid concerns over shared developer team

  - by alphadogg

  Say your company is committed (and don't want to consider not doing this) to sharing/pooling a development team across a handful of business units. What would you setup as concerns/expectations that must be cleared before doing this? For example: Need agreement between units on how much actual time (FTE) is allocated to each unit Need agreement on scheduling of staff need agreement on request procedure if extra time is required by one party etc... Have you been in a situation like this as a manager of one unit destined to use this? If so, what were problems you experienced? What would you have or did implement? Same if you were the manager of the shared team. Please assume, for discussion, that the people concerned know that you can swap devs in and out on a whim. I don't want to know the disadvantages of this approach; I know them. I want to anticipate issues and know how to mitigate the fallout.

  Read the article

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Maintaining State in Mud Engine

  - by Johnathon Sullinger

  I am currently working on a Mud Engine and have started implementing my state engine. One of the things that has me troubled is maintaining different states at once. For instance, lets say that the user has started a tutorial, which requires specific input. If the user types "help" I want to switch in to a help state, so they can get the help they need, then return them to the original state once exiting the help. my state system uses a State Manager to manage the state per user: public class StateManager { /// <summary> /// Gets the current state. /// </summary> public IState CurrentState { get; private set; } /// <summary> /// Gets the states available for use. /// </summary> /// <value> public List<IState> States { get; private set; } /// <summary> /// Gets the commands available. /// </summary> public List<ICommand> Commands { get; private set; } /// <summary> /// Gets the mob that this manager controls the state of. /// </summary> public IMob Mob { get; private set; } public void Initialize(IMob mob, IState initialState = null) { this.Mob = mob; if (initialState != null) { this.SwitchState(initialState); } } /// <summary> /// Performs the command. /// </summary> /// <param name="message">The message.</param> public void PerformCommand(IMessage message) { if (this.CurrentState != null) { ICommand command = this.CurrentState.GetCommand(message); if (command is NoOpCommand) { // NoOperation commands indicate that the current state is not finished yet. this.CurrentState.Render(this.Mob); } else if (command != null) { command.Execute(this.Mob); } else if (command == null) { new InvalidCommand().Execute(this.Mob); } } } /// <summary> /// Switches the state. /// </summary> /// <param name="state">The state.</param> public void SwitchState(IState state) { if (this.CurrentState != null) { this.CurrentState.Cleanup(); } this.CurrentState = state; if (state != null) { this.CurrentState.Render(this.Mob); } } } Each of the different states that the user can be in, is a Type implementing IState. public interface IState { /// <summary> /// Renders the current state to the players terminal. /// </summary> /// <param name="player">The player to render to</param> void Render(IMob mob); /// <summary> /// Gets the Command that the player entered and preps it for execution. /// </summary> /// <returns></returns> ICommand GetCommand(IMessage command); /// <summary> /// Cleanups this instance during a state change. /// </summary> void Cleanup(); } Example state: public class ConnectState : IState { /// <summary> /// The connected player /// </summary> private IMob connectedPlayer; public void Render(IMob mob) { if (!(mob is IPlayer)) { throw new NullReferenceException("ConnectState can only be used with a player object implementing IPlayer"); } //Store a reference for the GetCommand() method to use. this.connectedPlayer = mob as IPlayer; var server = mob.Game as IServer; var game = mob.Game as IGame; // It is not guaranteed that mob.Game will implement IServer. We are only guaranteed that it will implement IGame. if (server == null) { throw new NullReferenceException("LoginState can only be set to a player object that is part of a server."); } //Output the game information mob.Send(new InformationalMessage(game.Name)); mob.Send(new InformationalMessage(game.Description)); mob.Send(new InformationalMessage(string.Empty)); //blank line //Output the server MOTD information mob.Send(new InformationalMessage(string.Join("\n", server.MessageOfTheDay))); mob.Send(new InformationalMessage(string.Empty)); //blank line mob.StateManager.SwitchState(new LoginState()); } /// <summary> /// Gets the command. /// </summary> /// <param name="message">The message.</param> /// <returns>Returns no operation required.</returns> public Commands.ICommand GetCommand(IMessage message) { return new NoOpCommand(); } /// <summary> /// Cleanups this instance during a state change. /// </summary> public void Cleanup() { // We have nothing to clean up. return; } } With the way that I have my FSM set up at the moment, the user can only ever have one state at a time. I read a few different posts on here about state management but nothing regarding keeping a stack history. I thought about using a Stack collection, and just pushing new states on to the stack then popping them off as the user moves out from one. It seems like it would work, but I'm not sure if it is the best approach to take. I'm looking for recommendations on this. I'm currently swapping state from within the individual states themselves as well which I'm on the fence about if it makes sense to do there or not. The user enters a command, the StateManager passes the command to the current State and lets it determine if it needs it (like passing in a password after entering a user name), if the state doesn't need any further commands, it returns null. If it does need to continue doing work, it returns a No Operation to let the state manager know that the state still requires further input from the user. If null is returned, the state manager will then go find the appropriate state for the command entered by the user. Example state requiring additional input from the user public class LoginState : IState { /// <summary> /// The connected player /// </summary> private IPlayer connectedPlayer; private enum CurrentState { FetchUserName, FetchPassword, InvalidUser, } private CurrentState currentState; /// <summary> /// Renders the current state to the players terminal. /// </summary> /// <param name="mob"></param> /// <exception cref="System.NullReferenceException"> /// ConnectState can only be used with a player object implementing IPlayer /// or /// LoginState can only be set to a player object that is part of a server. /// </exception> public void Render(IMob mob) { if (!(mob is IPlayer)) { throw new NullReferenceException("ConnectState can only be used with a player object implementing IPlayer"); } //Store a reference for the GetCommand() method to use. this.connectedPlayer = mob as IPlayer; var server = mob.Game as IServer; // Register to receive new input from the user. mob.ReceivedMessage += connectedPlayer_ReceivedMessage; if (server == null) { throw new NullReferenceException("LoginState can only be set to a player object that is part of a server."); } this.currentState = CurrentState.FetchUserName; switch (this.currentState) { case CurrentState.FetchUserName: mob.Send(new InputMessage("Please enter your user name")); break; case CurrentState.FetchPassword: mob.Send(new InputMessage("Please enter your password")); break; case CurrentState.InvalidUser: mob.Send(new InformationalMessage("Invalid username/password specified.")); this.currentState = CurrentState.FetchUserName; mob.Send(new InputMessage("Please enter your user name")); break; } } /// <summary> /// Receives the players input. /// </summary> /// <param name="sender">The sender.</param> /// <param name="e">The e.</param> void connectedPlayer_ReceivedMessage(object sender, IMessage e) { // Be good memory citizens and clean ourself up after receiving a message. // Not doing this results in duplicate events being registered and memory leaks. this.connectedPlayer.ReceivedMessage -= connectedPlayer_ReceivedMessage; ICommand command = this.GetCommand(e); } /// <summary> /// Gets the Command that the player entered and preps it for execution. /// </summary> /// <param name="command"></param> /// <returns>Returns the ICommand specified.</returns> public Commands.ICommand GetCommand(IMessage command) { if (this.currentState == CurrentState.FetchUserName) { this.connectedPlayer.Name = command.Message; this.currentState = CurrentState.FetchPassword; } else if (this.currentState == CurrentState.FetchPassword) { // find user } return new NoOpCommand(); } /// <summary> /// Cleanups this instance during a state change. /// </summary> public void Cleanup() { // If we have a player instance, we clean up the registered event. if (this.connectedPlayer != null) { this.connectedPlayer.ReceivedMessage -= this.connectedPlayer_ReceivedMessage; } } Maybe my entire FSM isn't wired up in the best way, but I would appreciate input on what would be the best to maintain a stack of state in a MUD game engine, and if my states should be allowed to receive the input from the user or not to check what command was entered before allowing the state manager to switch states. Thanks in advance.

  Read the article

• Stairway to XML: Level 3 - Working with Typed XML

  You can enforce the validation of an XML data type, variable or column by associating it with an XML Schema Collection. SQL Server validates a typed XML value against the rules defined in the schema collection so that INSERT or UPDATE operations will succeed only if the value being inserted or updated is valid as per the rules defined in the Schema Collection. NEW! Deployment Manager Early Access ReleaseDeploy SQL Server changes and .NET applications fast, frequently, and without fuss, using Deployment Manager, the new tool from Red Gate. Try the Early Access Release to get a 20% discount on Version 1. Download the Early Access Release.

  Read the article

• CodePlex Daily Summary for Friday, November 09, 2012

  CodePlex Daily Summary for Friday, November 09, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.GL2DX (OpenGL to DirectX Wrapper Library): GL2DX Release 1: The first release contains all source code for the GL2DX library and source code for the sample project demonstrating how to use the library for a Direct3D / XAML hybrid Windows 8 application.WCF y Net remoting en el famoso ejemplo HOLA MUNDO: Ejemplo: Versión liberadaD3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesHTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.Window Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...New Projects.NET Data Export Examples: This project is created to export data in C#,VB.NET from database,listview,command to PDF, Word,Excel,RTF,Html,XML,Access,DBF,SQL Script,SYLK,DIF,CSV,Clipboardb9b18a35-a80a-440c-bb8c-195be0225cfa: b9b18a35-a80a-440c-bb8c-195be0225cfaBudget Monkey: Personal Budgeting and Expense Tracking Application - ASP.Net MVC 4 - LINQ - Sql Server ClassLibrary5: ?0?????ORM ??:http://www.cnblogs.com/wushilonng/archive/2011/11/21/2257657.html ??????????????.CodeTextBox: CodeTextBox is a Windows Forms control for colorizing code while you are typing in the text box.Content Management System: web projectCopperfield: Copperfield is an extensibility framework built around contextual awareness. It is intended to be used in combination with one's DI / IoC framework of choice.Cyfuscator: This project show how create your own obfuscator for application .net, as a protection source codeData Browser: The Data Browser is a Windows 8 application that provides a great way to navigate and explore data (ODATA, RDF, ATOM, RDFa) published on the web. DevTask: Dev Task With MVC 4 and EF5DVB Viewer EPG Update Script: DVB Viewer EPG Update ScriptFcompress: Fcompress est un programme de compression simple, rapide et efficace de texte (mots). Programme conçu pour Eurêmaths, groupe Europole.Fdecompress: Fdecompress sert à décomprimer tout mot ou texte comprimer avec Fcompress.Hiren's Boot CD Program Launcher (Unicode support): Hiren's Boot CD Program Launcher (Unicode support)Image Gallery for WPF: A simple image gallery controlIMDb API: C# Class for grabbing data from the IMDb website.License Migration Live@edu Exchange to Office 365 A2: Only a little help to change the licenses after migration from Live@edu to Office 365MvcMSFootballManager: ASP MVC3 self-trainingNage: .NET Agent-based evolution frameworkOE NIK szakirány féléves: Féléves feladat.Office365 Helper: Office365 Helper is a collection of classes and methods to assist in administering and developing solutions for SharePoint online.Powershell Depo: This a collection of Powershell scripts that are collected and modified from anywhere and everywhere. Feel free to download whatever you need.Proejct13251109: sssProject13271109: sdfgdRemotableViewModel: The RemotableViewModel (RVM) library allows sharing of ViewModels accross process boundaries following the Model-View-ViewModel (MVVM) pattern.ScriptEngine: ScriptEngine for C#, JavaScript, VB. The ScriptEngine enables perform script snippets/files. In addition, the scripts can be cached.Shibboleth IdP Loader for ADFS: A PowerShell script to load Shibboleth federation IdPs as ADFS trusted claims providerSparklings: Game in which you change sparklings abilities using spots of light to help them reach the exit.Stala - Auto-update essentials: C# library and examples for event driven auto-updates without predefined graphical components/windows. Works with MSI packages and installer over web/intranet.STeaL : stealed functionarities from STL: STeaL is a .NET class library implemented with C# and enables you to use STL functionarities. especially, various of IList<T> extensions included.TechQueue: A series of Projects and code which are described in the blog http://techqueue.wordpress.comtesttom11082012git03: fsatesttom11082012tfs02: dsToyunda Phone: A simple searchable list of the songs available at the Karaoke rooms in the Epitanime event ran by students at the school named Epita in Paris.WebSearch.Net: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. Win8Controls: This project contains XAML based calendar control for WinRT / Windows Store Style application.WindowsCommonStorage: windows common storage

  Read the article

• Oracle VM RAC template - what it took

  - by wcoekaer

  In my previous posting I introduced the latest Oracle Real Application Cluster / Oracle VM template. I mentioned how easy it is to deploy a complete Oracle RAC cluster with Oracle VM. In fact, you don't need any prior knowledge at all to get a complete production-ready setup going. Here is an example... I built a 4 node RAC cluster, completely configured in just over 40 minutes - starting from import template into Oracle VM, create VMs to fully up and running Oracle RAC. And what was needed? 1 textfile with some hostnames and ip addresses and deploycluster.py. The setup is a 4 node cluster where each VM has 8GB of RAM and 4 vCPUs. The shared ASM storage in this case is 100GB, 5 x 20GB volumes. The VM names are racovm.0-racovm.3. The deploycluster script starts the VMs, verifies the configuration and sends the database cluster configuration info through Oracle VM Manager to the 4 node VMs. Once the VMs are up and running, the first VM starts the actual Oracle RAC setup inside and talks to the 3 other VMs. I did not log into any VM until after everything was completed. In fact, I connected to the database remotely before logging in at all. # ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini Oracle RAC OneCommand (v1.1.0) for Oracle VM - deploy cluster - (c) 2011-2012 Oracle Corporation (com: 26700:v1.1.0, lib: 126247:v1.1.0, var: 1100:v1.1.0) - v2.4.3 - wopr8.wimmekes.net (x86_64) Invoked as root at Sat Jun 2 17:31:29 2012 (size: 37500, mtime: Wed May 16 00:13:19 2012) Using: ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini INFO: Login password to Oracle VM Manager not supplied on command line or environment (DEPLOYCLUSTER_MGR_PASSWORD), prompting... Password: INFO: Attempting to connect to Oracle VM Manager... INFO: Oracle VM Client (3.1.1.305) protocol (1.8) CONNECTED (tcp) to Oracle VM Manager (3.1.1.336) protocol (1.8) IP (192.168.1.40) UUID (0004fb0000010000cbce8a3181569a3e) INFO: Inspecting /root/rac/deploycluster/netconfig.ini for number of nodes defined... INFO: Detected 4 nodes in: /root/rac/deploycluster/netconfig.ini INFO: Located a total of (4) VMs; 4 VMs with a simple name of: ['racovm.0', 'racovm.1', 'racovm.2', 'racovm.3'] INFO: Verifying all (4) VMs are in Running state INFO: VM with a simple name of "racovm.0" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.1" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.2" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.3" is in a Stopped state, attempting to start it...OK. INFO: Detected that all (4) VMs specified on command have (5) common shared disks between them (ASM_MIN_DISKS=5) INFO: The (4) VMs passed basic sanity checks and in Running state, sending cluster details as follows: netconfig.ini (Network setup): /root/rac/deploycluster/netconfig.ini buildcluster: yes INFO: Starting to send cluster details to all (4) VM(s)....... INFO: Sending to VM with a simple name of "racovm.0".... INFO: Sending to VM with a simple name of "racovm.1"..... INFO: Sending to VM with a simple name of "racovm.2"..... INFO: Sending to VM with a simple name of "racovm.3"...... INFO: Cluster details sent to (4) VMs... Check log (default location /u01/racovm/buildcluster.log) on build VM (racovm.0)... INFO: deploycluster.py completed successfully at 17:32:02 in 33.2 seconds (00m:33s) Logfile at: /root/rac/deploycluster/deploycluster2.log my netconfig.ini # Node specific information NODE1=db11rac1 NODE1VIP=db11rac1-vip NODE1PRIV=db11rac1-priv NODE1IP=192.168.1.56 NODE1VIPIP=192.168.1.65 NODE1PRIVIP=192.168.2.2 NODE2=db11rac2 NODE2VIP=db11rac2-vip NODE2PRIV=db11rac2-priv NODE2IP=192.168.1.58 NODE2VIPIP=192.168.1.66 NODE2PRIVIP=192.168.2.3 NODE3=db11rac3 NODE3VIP=db11rac3-vip NODE3PRIV=db11rac3-priv NODE3IP=192.168.1.173 NODE3VIPIP=192.168.1.174 NODE3PRIVIP=192.168.2.4 NODE4=db11rac4 NODE4VIP=db11rac4-vip NODE4PRIV=db11rac4-priv NODE4IP=192.168.1.175 NODE4VIPIP=192.168.1.176 NODE4PRIVIP=192.168.2.5 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=wimmekes.net DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=db11vip SCANIP=192.168.1.57 last few lines of the in-VM log file : 2012-06-02 14:01:40:[clusterstate:Time :db11rac1] Completed successfully in 2 seconds (0h:00m:02s) 2012-06-02 14:01:40:[buildcluster:Done :db11rac1] Build 11gR2 RAC Cluster 2012-06-02 14:01:40:[buildcluster:Time :db11rac1] Completed successfully in 1779 seconds (0h:29m:39s) From start_vm to completely configured : 29m:39s. The other 10m was the import template and create 4 VMs from template along with the shared storage configuration. This consists of a complete Oracle 11gR2 RAC database with ASM, CRS and the RDBMS up and running on all 4 nodes. Simply connect and use. Production ready. Oracle on Oracle.

  Read the article

• apt changelog for to-be installed packages

  - by ithkuil

  GUI update-manager is able to show the "changelog" of packages to-be installed (not downloaded yet). I also found out how to provide the .changelog files in the right place for update-manager to show them, and now I'm happy since I'm able to tell my clients that they can see changelogs of my custom packages directly from their gui. Unfortunately I'm not able to find any command line tool to do the same thing and that would be more useful on servers. From what I saw it seems that this convention (putting .changelog files directly alongside the .deb files in the apt repo) is a ubuntu specific extension. There are some debian resources (the reprepro man page for example) which point on a different way to store changelogs online, http://packages.debian.org/changelogs Does anybody know if there already exists a tool like apt-cache to show the changelogs from packages which are not yet installed (nor downloaded) ?

  Read the article

• Why Does Chrome Have So Many Open Processes?

  - by Jason Fitzpatrick

  If you’ve ever taken a peek in Task Manager while running Google Chrome, you may have been surprised to see that the number of chrome.exe entries radically exceeded the number of actual Chrome windows you had open. What’s the deal with all those processes? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Hard-copy approaches to time tracking

  - by STW

  I have a problem: I suck at tracking time-on-task for specific feature/defects/etc while coding them. I tend to jump between tasks a fair bit (partly due to the inherit juggling required by professional software development, partly due to my personal tendancy to focus on the code itself and not the business process around code). My personal preference is for a hard-copy system. Even with gabillions of pixels of real-estate on-screen I find it terribly distracting to keep a tracking window convienient; either I forget about it or it gets in my ways. So, looking for suggestions on time-tracking. My only requirement is a simple system to track start/stop times per task. I've considered going as far as buying a time-clock and giving each ticket a dedicated time-card. When I start working on it, punch-in; when done working, punch-out.

  Read the article

• MTP Won't Work With Newer Ubuntu

  - by spacesword

  I have a Philips GoGear Vibe 4 GB, set to MTP mode, as it's always been. This works fine with older versions of Ubuntu and works fine with Windows, but doesn't work with newer versions of Ubuntu. The version history is like this: 12.04 - works 12.10 - works 13.04 - doesn't work 14.04 - doesn't work Windows 7 - works When you plug the MP3 player in Ubuntu the file manager opens the root of the device, which contains the folder "internal storage". When you click on "internal storage" to open it, the file manager just hangs. And if you try to unmount the MP3 player, that process hangs too, until you just unplug it. In Windows when you click on internal storage, it opens and shows all the files it contains. And in the earlier versions of Ubuntu it just worked. Any ideas? Thanks.

  Read the article

• Error message during update from 13.04 to 13.10

  - by layonhands

  The following was reported after I attempted to report the problem back to Ubuntu: The problem cannot be reported: You have some obsolete package versions installed. Please upgrade the following packages and check if the problem still occurs: ubuntu-release-upgrader-gtk, apport, apport-gtk, apport-symptoms, apt, apt-utils, at-spi2-core, binutils, dbus, gcc-4.7-base, gdb, gir1.2-atk-1.0, gir1.2-gtk-3.0, glib-networking, glib-networking-common, glib-networking-services, gnupg, gpgv, ifupdown, initramfs-tools, initramfs-tools-bin, kmod, libappindicator3-1, libapt-inst1.5, libapt-pkg4.12, libasound2, libatk-bridge2.0-0, libatk1.0-0, libatk1.0-data, libatspi2.0-0, libc-bin, libc6, libcups2, libdbus-1-3, libdbusmenu-glib4, libdbusmenu-gtk3-4, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libgail-3-0, libgcc1, libgcrypt11, libglib2.0-0, libglib2.0-data, libgnutls26, libgomp1, libgstreamer-plugins-base1.0-0, libgstreamer1.0-0, libgtk-3-0, libgtk-3-bin, libgtk-3-common, libgudev-1.0-0, libicu48, libindicator3-7, libkmod2, liblcms2-2, libpci3, libplymouth2, libpolkit-agent-1-0, libpolkit-backend-1-0, libpolkit-gobject-1-0, libprocps0, libpython-stdlib, libpython2.7, libpython2.7-minimal, libpython2.7-stdlib, libpython3-stdlib, libpython3.3-minimal, libpython3.3-stdlib, libssl1.0.0, libstdc++6, libtiff5, libudev1, libx11-6, libx11-data, libx11-xcb1, libxcb-dri2-0, libxcb-glx0, libxcb-render0, libxcb-shm0, libxcb1, libxcursor1, libxext6, libxfixes3, libxi6, libxinerama1, libxml2, libxrandr2, libxrender1, libxres1, libxt6, libxtst6, libxxf86vm1, lsb-base, lsb-release, module-init-tools, multiarch-support, openssl, passwd, pciutils, perl, perl-base, perl-modules, plymouth, plymouth-theme-ubuntu-text, policykit-1, procps, python, python-gi, python-minimal, python2.7, python2.7-minimal, python3, python3-apport, python3-distupgrade, python3-gi, python3-minimal, python3-problem-report, python3-software-properties, python3-update-manager, python3.3, python3.3-minimal, rsyslog, shared-mime-info, software-properties-common, software-properties-gtk, tar, tzdata, ubuntu-release-upgrader-core, ubuntu-release-upgrader-gtk, udev, update-manager, update-manager-core, update-notifier, update-notifier-common If this question has already been answered, I'm sorry for the repost, but I would appreciate a link to the fix. Thanks. FYI: Dell Latitude D630, Intel Centrino processor. Also, the updater is currently running what seems to be the update. I will report back when it is done going through its process to let you know if it is in fact the 13.10 update. Update 2: System went through an update, but it wasn't for the OS. I think it was an update for the error message mentioned above. Now the OS update is currently running the 'distribution upgrade' portion of the update. This is further than it had gone before. Again I will report back once this is done to let you know whether or not the update was successful. Final Update: Don't know for sure what happened, but I'm almost sure that the error mentioned above was resolved in the first update prior to the 13.10 update. All set.

  Read the article

• Configure Calendar Server 7 to Use the davUniqueId Attribute

  - by dabrain

  Starting with Calendar Server 7 Update 3 (Patch 08) we introduce a new attribute davUniqueId in the davEntity objectclass, to use as the unique identifier.  The reason behind this is quite simple, the LDAP operational attribute nsUniqueId  has been chosen as the default value used for the unique identifier. It was discovered that this choice has a potential serious downside. The problem with using nsUniqueId is that if the LDAP entry for a user, group, or resource is deleted and recreated in LDAP, the new entry would receive a different nsUniqueId value from the Directory Server, causing a disconnect from the existing account in the calendar database. As a result, recreated users cannot access their existing calendars. How To Configure Calendar Server to Use the davUniqueId Attribute? Populate the davUniqueId to the ldap users. You can create a LDIF output file only or (-x option) directly run the ldapmodify from the populate-davuniqueid shell script. # ./populate-davuniqueid -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -b "o=red" -O -o /tmp/out.ldif The ldapmodify might failed like below, in that case the LDAP entry already have the 'daventity' objectclass, in those cases run populate-davuniqueid script without the -O option. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" ldapmodify: Type or value exists (20) In this case the user 'mparis' already have the objectclass 'daventity', ldapmodify do not take care of this DN and just take the next DN (if you start ldapmodify with -c option otherwise it stop's completely) dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: objectclass objectclass: daventity - add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d Even run populate-davuniqueid without -O option or changing the outputfile to dn: uid=mparis,ou=People,o=vmdomain.tld,o=red changetype: modify add: davuniqueid davuniqueid: 01a2c501-af0411e1-809de373-18ff5c8d The ldapmodify works fine now. The only issue I see here is you need verify which user might need the 'daventity' objectclass as well. On the other hand start without the objectclass and only add the objectclass for the users where you get 'Objectclass violation' report. That's indicate the objectclass is missing. # ldapmodify -x -h localhost -p 389 -D "cn=Directory Manager" -w <passwd> -c -f /tmp/out.ldif modifying entry "uid=mparis,ou=People,o=vmdomain.tld,o=red" Now it is time to change the configuration to use the davuniquid attribute # ./davadmin config modify -o davcore.uriinfo.permanentuniqueid -v davuniqueid It is also needed to modfiy the search filter to use davuniqueid instead of nsuniqueid # ./davadmin config modify -o davcore.uriinfo.subjectattributes -v "cn davstore icsstatus mail mailalternateaddress davUniqueId  owner preferredlanguageuid objectclass ismemberof uniquemember memberurl mgrprfc822mailmember" Afterward IWC Calendar works fine and my test user able to access all his old events.

  Read the article

• How To Create a Shortcut That Lets a Standard User Run An Application as Administrator

  - by Chris Hoffman

  Want to allow a standard user account to run an application as administrator without a UAC or password prompt? You can easily create a shortcut that uses the runas command with the /savecred switch, which saves the password. Note that using /savecred could be considered a security hole – a standard user will be able to use the runas /savecred command to run any command as administrator without entering a password. However, it’s still useful for situations where this doesn’t matter much – perhaps you want to allow a child’s standard user account to run a game as Administrator without asking you. We’ve also covered allowing a user to run an application as Administrator with no UAC prompts by creating a scheduled task. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Terminal as desktop background instead of wallper

  - by Janis Erdmanis

  I have come to conclusion that all my needs from nautilus is satisfied with terminal and last file manager. It also dismisses the need for multiple nautilus instances, which makes mess when I forgot how I meant to use different workspaces. The next step for my simplification would be to get rid of any possibility to open nautilus. Also I thought that my interaction with computer is file centred, therefore it makes sense to leave file manager in background of applications. Are there any ways to make terminal as desktop background with which I could interact?

  Read the article

• CodePlex Daily Summary for Wednesday, June 27, 2012

  CodePlex Daily Summary for Wednesday, June 27, 2012Popular ReleasesEasySL: RapidSL V2: Rewrite RapidSL UI Framework, Using Silverlight 5.0 EF4.1 Code First Ria Service SP2 + Lastest Silverlight Toolkit.Windows Workflow Foundation on Codeplex: Microsoft.Activities.UnitTesting v2.0.6: Microsoft.Activities.UnitTestingMicrosoft.Activities.UnitTesting is a unit testing framework designed to make it easier to unit test activities and workflow services built with Windows Workflow Foundation (WF4). The Framework contains Test Hosts which wrap WorkflowInvoker, WorkflowApplication and WorkflowServiceHost Assert helper classes for asserting out arguments and tracking records Support for Xaml Injection which allows you to mock or stub activities that you don't want to run when tes...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.56: Fix for Issue #18280: assignment to undefined global in strict mode causes null-reference exception. Fix for Issue #18279: control characters within CSS strings must be escaped. Discussion #360291: add optional MSBuild task ability to combine JS files for minification, in addition to minifying each one separately. Expand -braces switch to also add option "source," which looks to the source for whether an opening block brace should be on a new line or on the same line. Minor code tweak...SOLID by example: All examples: All solid examplesSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1726.406): Use of new version of connection controls for a full support of OSDP authentication mechanism for CRM Online.StreamInsight Samples: StreamInsight Product Team Samples V2.1: These samples correspond to the new StreamInsight APIs introduced with V2.1.Umbraco CMS: Umbraco CMS 5.2: Development on Umbraco v5 discontinued After much discussion and consultation with leaders from the Umbraco community it was decided that work on the v5 branch would be discontinued with efforts being refocused on the stable and feature rich v4 branch. For full details as to why this decision was made please watch the CodeGarden 12 Keynote. What about all that hard work?!?? We are not binning everything and it does not mean that all work done on 5 is lost! we are taking all of the best and m...IIS Express Manager: IIS Express 0.31 B: V0.1B - 04 May, 2012 Initiated Project. V0.2B - 05May, 2012 1. Fixed small bug. Threw error when stop button was pressed in an already stopped application. 2. Removed start and stop button. Double clicking on list items will now stop / start the websites. 3. Improved code readability. 4. Changed Orientation of Buttons in UI. V0.3B - 06May, 2012 1. Complete modification of IISEM and process ID handling 2. IISEM is now capable of reflecting the existing IISExpress processes right from startup...CodeGenerate: CodeGenerate Alpha: The Project can auto generate C# code. Include BLL Layer、Domain Layer、IDAL Layer、DAL Layer. Support SqlServer And Oracle This is a alpha program,but which can run and generate code. Generate database table info into MS WordXDA ROM HUB: XDA ROM HUB v0.9: Kernel listing added -- Thanks to iONEx Added scripts installer button. Added "Nandroid On The Go" -- Perform a Nandroid backup without a PC! Added official Android app!ExtAspNet: ExtAspNet v3.1.8.2: +2012-06-24 v3.1.8 +????Grid???????（???????ExpandUnusedSpace????????）（??）。 -????MinColumnWidth（??????）。 -????AutoExpandColumn，???????????????（ColumnID）（?????ForceFitFirstTime??ForceFitAllTime，??????）。 -????AutoExpandColumnMax?AutoExpandColumnMin。 -????ForceFitFirstTime，????????????，??????????（????????????）。 -????ForceFitAllTime，????????????，??????????（??????????????????）。 -????VerticalScrollWidth，????????（??????????，0?????????????）。 -????grid/grid_forcefit.aspx。 -???????????En...AJAX Control Toolkit: June 2012 Release: AJAX Control Toolkit Release Notes - June 2012 Release Version 60623June 2012 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found here: 11121. - Pages using ...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.5: Version: 2.5.0.5 (Milestone 5): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete WAF: Add IsInDesignMode property to the WafConfiguration class. WAF: Introduce the IModuleController interface. WAF: Add ...Windows 8 Metro RSS Reader: Metro RSS Reader.v7: Updated for Windows 8 Release Preview Changed background and foreground colors Used VariableSizeGrid layout to wrap blog posts with images Sort items with Images first, text-only last Enabled Caching to improve navigation between framesConfuser: Confuser 1.9: Change log: * Stable output (i.e. given the same seed & input assemblies, you'll get the same output assemblies) + Generate debug symbols, now it is possible to debug the output under a debugger! (Of course without enabling anti debug) + Generating obfuscation database, most of the obfuscation data in stored in it. + Two tools utilizing the obfuscation database (Database viewer & Stack trace decoder) * Change the protection scheme -----Please read Bug Report before you report a bug-----...XDesigner.Development: First release: First releaseBlackJumboDog: Ver5.6.5: 2012.06.22 Ver5.6.5 　(1) FTP??????? EPSV ??　EPRT　???????MVVM Light Toolkit: V4RTM (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RTM. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibs An installer with binaries, snippets and templates will follow ASAP.Weapsy - ASP.NET MVC CMS: 1.0.0: - Some changes to Layout and CSS - Changed version number to 1.0.0.0 - Solved Cache and Session items handler error in IIS 7 - Created the Modules, Plugins and Widgets Areas - Replaced CKEditor with TinyMCE - Created the System Info page - Minor changesAcDown????? - AcDown Downloader Framework: AcDown????? v3.11.7: ?? ●AcDown??????????、??、??????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ...New Projects2SexyContent for DotNetNuke - Installer: Helps install 2SexyContent in DotNetNuke, by reviewing requirements and then installing everything automatically. Assignment Solution Source: Project of studentsCode Markers Sample: A project that shows an example code markers implementation. Code Markers are used to synchronize automation as well as measure performanceFull Day Strategy Plugin 2: The source code is open source but the know how it's not. FunBox: A small project which is developing in C# and MVC2.game.sys: game.sys. proyecto softHyperStat.NET: HyperStat is the minimalist's static website compiler, designed with simplicity and usability in mind. Written in C#.NET for Windows, OSX and Linux.MyLogger: A simple and efficient logger for WP debuggingoAvans: The oAvans project is a initiative to provide a C# library for authenticating and communicating with the Avans publicAPI through the oAuth protocol.Oiler Game: A Windows Phone SL/XNA game in production by two UAF students as a learnign process.PixelSense Interaction: Shows how a Pixelsense unit can interact with some WP7 devicesPokémon Character Sheet Manager: Character sheet manager for Pokemon Tabletop AdventuresPower Manager PDD Sample for Windows Embedded Compact (CE): Windows Embedded Compact (CE) Power Manager PDD Sample.RenWuZhi: RenWuZhiSpell checker .Net: Based on GUN Aspell and implement with .Net. Can check the word misspelling.testgit062620121: hjTestProjectFan: testToolkit.Csv: Toolkit for parsing CSV into generic datatypes for simple data handling. Adheres to CSV specification for full compatibility. Implemented with FsLex and FsYacc.Universitary Tool: This project is being developed as pré requisite of university conclusion.WinGestionComercial: hola

  Read the article

• NomCom Time

  - by RickHeiges

  Well, it is official... there is a race for the community seats on the PASS NomCom. I am very pleased to see that we have 12 people who decided to put their names forward for this task. This is largely a thankless job that takes a great deal of time, judgement, and consideration. I have put my name forward as one of those people who would like to take on this task and serve PASS (and the greater SQL Community) in this effort. You can find out more about me and the other candidates for the NomCom...(read more)

  Read the article

• Magento Bulk Product Import + Modules Nightmare

  - by mike

  Have 5,000 products in CSV file File has been re-saved as UT8 file in google documents and exported to CSV from excel File loads perfectly with all fields in demo of magento store manager (except we dont want to buy it:) When trying to upload in regular Magento..keep getting error messages on column duplicates....yes we have hundreds of duplicates as the titles of products in fields correspond with different sizes, etc...no way around it Any solutions around this or any open source software similar to store manager that can do the trick. Ready to give up and go to paid solution such as Big Commerce Also, Uploaded a bunch of free modules/keys...of open source bulk import products from magentocommerce but I cant find them anywhere in the main admin panel to use...there is no menu item for them anywhere??

  Read the article

• How to prevent wireless network asking password when briefly out of range

  - by Ian Mackinnon

  When I'm connected to a wireless network from quite far away I sometimes briefly lose the connection. Then Network Manager prompts me to re-confirm the password as if it suspected that was the problem that caused the loss of connection (the password is already filled in in the dialog box). Is this normal behaviour? Can I prevent it from happening and have Network Manager automatically reconnect without the password dialog box when the wireless network comes back into range? I'm using 10.04 (32bit, Gnome) on an Acer Aspire one.

  Read the article

• First Foray&ndash;About timeout

  - by SQLMonger

  It has been quite a while since I signed up for this blog site and high time that something was posted.  I have a list of topics that I will be working through and posting.  Some I am sure will have been posted by others, but I will be sticking to the technical problems and challenges that I’ve recently faced, and the solutions that worked for me.  My motto when learning something new has always been “My kingdom for an example!”, and I plan on delivering useful examples here so others can learn from my efforts, failures and successes.   A bit of background about me… My name is Clayton Groom. I am a founding partner of a consulting firm in St. Louis Missouri, Covenant Technology Partners, LLC and focus on SQL Server Data Warehouse design, Analysis Services and Enterprise Reporting solutions.  I have been working with SQL Server since the early nineties, when it still only ran on OS/2. I love solving puzzles and technical challenges.   Enough about me… On to a real problem… SSIS Connection Time outs versus Command Time outs Last week, I was working on automating the processing for a large Analysis Services cube.  I had reworked an SSIS package and script task originally posted by Vidas Matelis that automates the process of adding new and dropping old partitions to/from an Analysis Services cube.  I had the package working great, tested, and ready for deployment.  It basically performs a query against the source system to determine if there is new data in the warehouse that will require a new partition to be added to the cube, and it checks the cube to see if there are any partitions that are present that are no longer needed in a rolling 60 month window. My client uses Tivoli for running all their production jobs, and not SQL Agent, so I had to build a command line file for Tivoli to use to run the package. Everything was going great. I had tested the command file from my development workstation using an XML configuration file to pass in server-specific parameters into the package when executed using the DTExec utility. With all the pieces ready, I updated the dtsconfig file to point to the UAT environment and started working with the Tivoli developer to test the job.  On the first run, the job failed, and from what I could see in the SSIS log, it had failed because of a timeout. Other errors in the log made me think that perhaps the connection string had not been passed into the package correctly. We bumped the Connection Manager  timeout values from 20 seconds to 120 seconds and tried again. The job still failed. After changing the command line to use the /SET option instead of the /CONFIGFILE option, we tested again, and again failure. After a number more failed attempts, and getting the Teradata DBA involved to monitor and see if we were connecting and failing or just failing to connect, we determined that the job was indeed connecting to the server and then disconnecting itself after 30 seconds.  This seemed odd, as we had the timeout values for the connection manager set to 180 seconds by then.  At this point one of the DBA’s found a post on the Teradata forum that had the clues to the puzzle: There is a separate “CommandTimeout” custom property on the Data source object that may needed to be adjusted for longer running queries.  I opened up the SSIS package, opened the data flow task that generated the partition list table and right-clicked on the data source. from the context menu, I selected “Show Advanced Editor” and found the property. Sure enough, it was set to 30 seconds. The CommandTimeout property can also be edited in the SSIS Properties sheet. In order to determine how long the timeout needed to be, I ran the query from the task in the development environment and received a response in a matter of seconds.  I then tried the same query against the production database and waited several minutes for a response. This did not seem to be a reasonable response time for the query involved, and indeed it wasn’t. The Teradata DBA’s adjusted the query governor settings for the service account I was testing with, and we were able to get the response back down under a minute.  Still, I set the CommandTimeout property to a much higher value in case the job was ever started during a time of high-demand on the production server. With this change in place, the job finally completed successfully.  The lesson learned for me was two-fold: Always compare query execution times between development and production environments, and don’t assume that production will always be faster.  With higher user demands, query governors, and a whole lot more data, the execution time of even what might seem to be simple queries can vary greatly. SSIS Connection time out settings do not affect command time outs.  Connection timeouts control how long the package will wait for a response from the server before assuming the server is not available or is not responding. Command time outs control how long a task will wait for results to start being returned before deciding that the server is not responding. Both lessons seem pretty straight forward, and I felt pretty sheepish once I finally figured out what the issue was.  To be fair though, In the 5+ years that I have been working with SSIS, I could only recall one other time where I had to set the CommandTimeout property, and that memory only resurfaced while I was penning this post.

  Read the article

• Starting it back up again

  - by Mickey Gousset

  After a couple of year hiatus from blogging at Geeks With Blogs, I’m back!  I’m still blogging about Visual Studio 2010 and TFS 2010 over at Team System Rocks (soon to undergo some major revisions), so expect to see some cross postings from there. Here though, I expect to focus on System Center technologies (mostly System Center Operations Manager and System Center Service Manager, with some of the others thrown in there too, as that is my day job now..  I’ll also use this blog to start tracking my foray into Windows Phone 7 development.  I’ve decided to go the game programming route first.

  Read the article

• EPM 11.1.2.2.000 release - considerations

  - by THE

  (guest Article by Nancy) Please be aware with the upcoming release of EPM v11.1.2.2.000, it is highly recommended you first read the"ORACLE® ENTERPRISE PERFORMANCE MANAGEMENT SYSTEM 11.1.2.2.000 Readme" prior to installing this release. We want to highlight the "Installation Information" section which includes the following late-breaking information: Business Rules Migration to Calculation Manager Oracle Hyperion Calculation Manager has replaced Oracle Hyperion Business Rules as the mechanism for designing and managing business rules, therefore, Business Rules is no longer released with EPM System Release 11.1.2.2. If you are applying 11.1.2.2 as a maintenance release, or upgrading to Release 11.1.2.2, and have been using Business Rules in an earlier release, you must migrate to Calculation Manager rules in Release 11.1.2.2. (See Oracle Enterprise Performance Management System Installation and Configuration Guide.) Planning User Interface Enhancements This release of Planning includes a large number of user interface enhancements, as described in Oracle Hyperion Planning New Features. To optimize performance with these new features, you must implement the following recommended configuration. Server: 64-bit, 16 GB physical RAM Client: Optimized for Internet Explorer 9 and Firefox 10 or higher Client-to-Server Connectivity: High-speed internet connection or VPN connection between client and server, client-to-server ping time < 150 milliseconds for best performance The new, improved Planning user interface requires efficient browsers to handle interactivity provided through Web 2.0 like functionality. In our testing, Internet Explorer 7, Internet Explorer 8, and Firefox 3.x are not sufficient to handle such interactivity, and the responsiveness in these versions of browsers is not as fast as the user interface in the previous releases of Planning. For this reason, we strongly recommend that you upgrade your browser to Internet Explorer 9 or Firefox 10 to get responsiveness similar to what you experienced in previous releases. In some instances, the response times in Internet Explorer 7, Internet Explorer 8 and Firefox 3.x could be acceptable. Hence, we suggest that you uptake the new user interface only after you conduct an end user response test and you are satisfied with the results of these tests for these versions of browsers. Please note that it is still possible to leverage the old user interface and features from Planning Release 11.1.2.1. (For more information, see “Using the Planning Release 11.1.2.1 User Interface and Features” in the Oracle Hyperion Planning Administrator's Guide.) IBM HTTP Server and IIS Default Ports Both IBM HTTP Server and IIS Web Server use 80 as their default port. If you are using WebSphere, you must change one of these defaults so that there is no port conflict. If you have further questions, please utilize the  Planning or Essbase MOS Community.

  Read the article

• Reading train stop display names from a resource bundle

  - by Frank Nimphius

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} In Oracle JDeveloper 11g R1, you set the display name of a train stop of an ADF bounded task flow train model by using the Oracle JDeveloper Structure Window. To do so Double-click onto the bounded task flow configuration file (XML) located in the Application Navigator so the task flow diagram open In the task flow diagram, select the view activity node for which you want to define the display name. In the Structure Window., expand the view activity node and then the train-stop node therein Add the display name element by using the right-click context menu on the train-stop node, selecting Insert inside train-stop > Display Name Edit the Display Name value with the Property Inspector Following the steps outlined above, you can define static display names – like "PF1" for page fragment 1 shown in the image below - for train stops to show at runtime. In the following, I explain how you can change the static display string to a dynamic string that reads the display label from a resource bundle so train stop labels can be internationalized. There are different strategies available for managing message bundles within an Oracle JDeveloper project. In this blog entry, I decided to build and configure the default properties file as indicated by the projects properties. To learn about the suggested file name and location, open the JDeveloper project properties (use a right mouse click on the project node in the Application Navigator and choose Project Properties. Select the Resource Bundle node to see the suggested name and location for the default message bundle. Note that this is the resource bundle that Oracle JDeveloper would automatically create when you assign a text resource to an ADF Faces component in a page. For the train stop display name, we need to create the message bundle manually as there is no context menu help available in Oracle JDeveloper. For this, use a right mouse click on the JDeveloper project and choose New | General | File from the menu and in the opened dialog. Specify the message bundle file name as the name looked up before in the project properties Resource Bundle option. Also, ensure that the file is saved in a directory structure that matches the package structure shown in the Resource Bundle dialog. For example, you would save the properties file in the View Project's src > adf > sample directory if the package structure was "adf.sample" (adf.sample.ViewControllerBundle). Edit the properties file and define key – values pairs for the train stop component. In the sample, such key value pairs are TrainStop1=Train Stop 1 TrainStop2=Train Stop 2 TrainStop3=Train Stop 3 Next, double click the faces-config.xml file and switch the opened editor to the Overview tab. Select the Application category and press the green plus icon next to the Resource Bundle section. Define the resource bundle Base Name as the package and properties file name, for example adf.sample.ViewControllerBundle Finally, define a variable name for the message bundle so the bundle can be accessed from Expression Language. For this blog example, the name is chosen as "messageBundle". <resource-bundle>   <base-name>adf.sample.ViewControllerBundle</base-name>   <var>messageBundle</var> </resource-bundle> Next, select the display-name element in the train stop node (similar to when creating the display name) and use the Property Inspector to change the static display string to an EL expression referencing the message bundle. For example: #{messageBundle.TrainStop1} At runtime, the train stops now show display names read from a message bundle (the properties file).

  Read the article

• Demantra 7.3.1.3 Controlling MDP_MATRIX Combinations Assigned to Forecasting Tasks Using TargetTaskSize

  - by user702295

  New 7.3.1.3 parameter: TargetTaskSize Old parameter: BranchID  Multiple, deprecated  7.3.1.3 onwards Parameter Location: Parameters > System Parameters > Engine > Proport   Default: 0   Engine Mode: Both   Details: Specifies how many MDP_MATRIX combinations the analytical engine attempts to assign to each forecasting task.  Allocation will be affected by forecsat tree branch size.  TaskTargetSize is automcatically calculated.  It holds the perferred branch size, in number of combinations in the lowest level. This parameter is adjusted to a lower value for smaller schemas, depending on the number of available engines.   - As the forecast is generated the engine goes up the tree using max_fore_level and not top_level -1.  Max_fore_level has     to be less than or equal to top_level -1.  Due to this requirement, combinations falling under the same top level -1     member must be in the same task.  A member of the top level -1 of the forecast tree is known as a branch.  An engine     task is therefore comprised of one or more branches.     - Reveal current task size       go to Engine Administrator --> View --> Branch Information and run the application on your Demantra schema.  This will be deprecated in 7.3.1.3 since there is no longer a means of adjusting the brach size directly.  The focus is now on proper hierarchy / forecast design.     - Control of tasks       The number of tasks created is the lowest of number of branches, as defined by top level -1 members in forecast       tree, and engine sessions and the value of TargetTaskSize.  You are used to using the branch multiplier in this       calculation.  As of 7.3.1.3, the branch ID multiple is deprecated.     - Discovery of current branch size       To resolve this you must review the 2nd highest level in the forecast tree (below highest/highest) as this is the       level which determines the size of the branches.  If a few resulting tasks are too large it is recommended that       the forecast tree level driving branches be revised or at times completely removed from the forecast tree.     - Control of foreacast tree branch size         - Run the following sql to determine how even the branches are being split by the engine:             select count(*),branch_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by branch_id;             This will give you an understanding if some of the individual branches have an unusually large number of           rows and thus might indicate that the engine is not efficiently dividing up the parallel tasks.         - Based on the results of this sql, we may want to adjust the branch id multiplier and/or the number of engines           (both of these settings are found in the Engine Administrator)           select count(*), level_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by level_id;           This will give us an understanding at which level of the Forecast tree where the forecast is being generated.            Having a majority of combinations higher on the forecast tree might indicate either a poorly designed forecast           tree and/or engine parameters that are too strict           Based on the results of this we would adjust the Forecast Tree to see if choosing a different hierarchy might           produce a forecast, with more combinations, at a lower level.           For example:             - Review the 2nd highest level in the forecast tree, below highest/highest, as this is the level which               determines the size of the branches.             - If a few resulting tasks are too large it is recommended that the forecast tree level driving branches               be revised or at times completely removed from the forecast tree.               - For example, if the highest level of the forecast tree is set to Brand/All Locations.             - You have 10 brands but 2 of the brands account for 67% and 29% of all combinations.             - There is a distinct possibility that the tasks resulting from these 2 branches will be too large for               a single engine to process.  Some possible solutions could be to remove the Brand level and instead               use a different product grouping which has a more even distribution, possibly Product Group.               - It is also possible to add a location dimension to this forecast tree level, for example Customer.                This will also reduce forecast tree branch size and will deliver a balanced task allocation.             - A correctly configured Forecast Tree is something that is done by the Implementation team and is               not the responsibility of Oracle Support.  Allocation will be affected by forecast tree branch size.  When TargetTaskSize is set to 0, the default value, the system automatically calculates a value for 'TargetTaskSize' depending on the number of engines.   - QUESTION:  Does this mean that if TargetTaskSize is 1, we use tree branch size to allocate branches to tasks instead                of automatically calculating the size?     ANSWER: DEV Strongly recommends that the setting of TargetTaskSize remain at the DEFAULT of ZERO (0).   - How to control the number of engines?     Determine how many CPUs are on the machine(s) that is (are) running the engine.  As mentioned earlier, the general     rule is that you should designate 2 engines per each CPU that is available.  So for example, if you are running the     engine on a machine that has 4 CPU then you can have up to 8 engines designated in the Engine Administrator.  In this     type of architecture then instead of having one 'localhost' in your Engine Settings Screen, you would have 'localhost'     repeated eight times in this field.     Where do I set the number of engines?                 To add multiples computers where engine will run, please do a back-up of Settings.xml file under         Analytical Engines\bin\ folder, then edit it and add there the selected machines.                 Example, this will allow 3 engines to start:         - <Entry>           <Key argument="ComputerNames" />           <Value type="string" argument="localhost,localhost,localhost" />           </Entry Otherwise, if there are no additional engines defined, the calculated value of 'TargetTaskSize' is used. (Oracle does not recommend changing the default value.) The TargetTaskSize holds the engines prefered branch size, in number of level 1 combinations.   - Level 1 combinations, known as group size The engine manager will use this parameter to attempt creating branches with similar size.   * The engine manager will not create engines that do not have a branch. The engine divider algorithm uses the value of 'TargetTaskSize' as a system-preferred branch size to create branches that are more equal in size which improves engine performance.  The engine divider will try to add as many tasks as possible to an existing branch, up to the limit of 'TargetTaskSize' level 1 combinations, before adding new branches. Coming up next: - The engine divider - Group size - Level 1 combinations - MAX_FORE_LEVEL - Engine Parameters  

  Read the article

• Is committing/checking code everyday a good practice?

  - by ArtB

  I've been reading Martin Fowler's note on Continuous Integration and he lists as a must "Everyone Commits To the Mainline Every Day". I do not like to commit code unless the section I'm working on is complete and that in practice I commit my code every three days: one day to investigate/reproduce the task and make some preliminary changes, a second day to complete the changes, and a third day to write the tests and clean it up^ for submission. I would not feel comfortable submitting the code sooner. Now, I pull changes from the repository and integrate them locally usually twice a day, but I do not commit that often unless I can carve out a smaller piece of work. Question: is committing everyday such a good practice that I should change my workflow to accomodate it, or it is not that advisable? ^ The order is more arbitrary and depends on the task, my point was to illustrate the time span and activities, not the exact sequence.

  Read the article

• Skipping intermediate Ubuntu OS upgrade to latest one,How do I upgrade from 9.04 to 10.04.2?

  - by Yadnesh

  I'm currently runing Ubuntu 9.04 Jaunty. I want to upgrade to 10.04.02, but whenever I use the Update manager to do this, it fails with the error "An upgrade from 'jaunty' to 'lucid' is not supported with this tool". I also tried to run sudo do-release-upgrade -d, but it fails with the same error message: Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'lucid.tar.gz' authenticate 'lucid.tar.gz' against 'lucid.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Can not upgrade An upgrade from 'jaunty' to 'lucid' is not supported with this tool.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >