Search Results

Search found 98447 results on 3938 pages for 'sql server denali'.

Page 1542/3938 | < Previous Page | 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549  | Next Page >

• Configuring OpenLDAP as a Active Directory Proxy

  - by vadensumbra

  We try to set up an Active Directory server for company-wide authentication. Some of the servers that should authenticate against the AD are placed in a DMZ, so we thought of using a LDAP-server as a proxy, so that only 1 server in the DMZ has to connect to the LAN where the AD-server is placed). With some googling it was no problem to configure the slapd (see slapd.conf below) and it seemed to work when using the ldapsearch tool, so we tried to use it in apache2 htaccess to authenticate the user over the LDAP-proxy. And here comes the problem: We found out the username in the AD is stored in the attribute 'sAMAccountName' so we configured it in .htaccess (see below) but the login didn't work. In the syslog we found out that the filter for the ldapsearch was not (like it should be) '(&(objectClass=*)(sAMAccountName=authtest01))' but '(&(objectClass=*)(?=undefined))' which we found out is slapd's way to show that the attribute do not exists or the value is syntactically wrong for this attribute. We thought of a missing schema and found the microsoft.schema (and the .std / .ext ones of it) and tried to include them in the slapd.conf. Which does not work. We found no working schemata so we just picked out the part about the sAMAccountName and build a microsoft.minimal.schema (see below) that we included. Now we get the more precise log in the syslog: Jun 16 13:32:04 breauthsrv01 slapd[21229]: get_ava: illegal value for attributeType sAMAccountName Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SRCH base="ou=oraise,dc=int,dc=oraise,dc=de" scope=2 deref=3 filter="(&(objectClass=\*)(?sAMAccountName=authtest01))" Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SRCH attr=sAMAccountName Jun 16 13:32:04 breauthsrv01 slapd[21229]: conn=0 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Using our Apache htaccess directly with the AD via LDAP works though. Anyone got a working setup? Thanks for any help in advance: slapd.conf: allow bind_v2 include /etc/ldap/schema/core.schema ... include /etc/ldap/schema/microsoft.minimal.schema ... backend ldap database ldap suffix "ou=xxx,dc=int,dc=xxx,dc=de" uri "ldap://80.156.177.161:389" acl-bind bindmethod=simple binddn="CN=authtest01,ou=GPO-Test,ou=xxx,dc=int,dc=xxx,dc=de" credentials=xxxxx .htaccess: AuthBasicProvider ldap AuthType basic AuthName "AuthTest" AuthLDAPURL "ldap://breauthsrv01.xxx.de:389/OU=xxx,DC=int,DC=xxx,DC=de?sAMAccountName?sub" AuthzLDAPAuthoritative On AuthLDAPGroupAttribute member AuthLDAPBindDN CN=authtest02,OU=GPO-Test,OU=xxx,DC=int,DC=xxx,DC=de AuthLDAPBindPassword test123 Require valid-user microsoft.minimal.schema: attributetype ( 1.2.840.113556.1.4.221 NAME 'sAMAccountName' SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE )

  Read the article

• Properly Configured Rsyslog on CentOS

  - by Gaia

  I'm trying to configure Rsyslog 5.8.10 on CentOS 6.4 to send Apache's error and access logs to a remote server. It's working, but I have a couple questions. A) I would like to use as few queues (and resources) as possible. I send error logs to server A, send access logs to server A, send both logs in one stream to server B. Should I specify one queue per external service (2 queues) or one queue per stream (3 queues, as I have now)? This is what I have: $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName logglyaccessqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 if $syslogtag startswith 'www-access' then @@logs-01.loggly.com:514;logglyaccess $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName logglyerrorsqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 if $syslogtag startswith 'www-errors' then @@logs-01.loggly.com:514;logglyerrors $DefaultNetstreamDriverCAFile /etc/syslog.papertrail.crt # trust these CAs $ActionSendStreamDriver gtls # use gtls netstream driver $ActionSendStreamDriverMode 1 # require TLS $ActionSendStreamDriverAuthMode x509/name # authenticate by hostname $ActionResumeInterval 10 $ActionQueueSize 100000 $ActionQueueDiscardMark 97500 $ActionQueueHighWaterMark 80000 $ActionQueueType LinkedList $ActionQueueFileName papertrailqueue $ActionQueueCheckpointInterval 100 $ActionQueueMaxDiskSpace 1g $ActionResumeRetryCount -1 $ActionQueueSaveOnShutdown on $ActionQueueTimeoutEnqueue 10 $ActionQueueDiscardSeverity 0 *.* @@logs.papertrailapp.com:XXXXX;papertrailstandard & ~ B) Does a queue block get used over and over by every send action that follows it or only by the first one or only until it encounters a send followed by a discard action (~)? C) How do I reset a queue block so that an upcoming send action does not use a queue at all? D) Does a TLS block get used over and over by every send action that follows it or only by the first one or only until it encounters a send followed by a discard action (~)? E) How do I reset a TLS block so that an upcoming send action does not use TLS at all? F) If I run rsyslog -N1 I get: rsyslogd -N1 rsyslogd: version 5.8.10, config validation run (level 1), master config /etc/rsyslog.conf rsyslogd: WARNING: rsyslogd is running in compatibility mode. Automatically generated config directives may interfer with your rsyslog.conf settings. We suggest upgrading your config and adding -c5 as the first rsyslogd option. rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: ModLoad immark rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: MarkMessagePeriod 1200 rsyslogd: Warning: backward compatibility layer added to following directive to rsyslog.conf: ModLoad imuxsock rsyslogd: End of config validation run. Bye. Where do I place the -c5 so that it doesnt run in compatibility mode anymore?

  Read the article

• How to transition to Comcast with static IP address [migrated]

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• How to a2ensite and a2dissite?

  - by John

  I'm logged into a Linux server. I think it's a Red Hat distribution. The commands a2ensite and a2dissite are not available. In the /etc/httpd directory, I don't see any mention of sites-enabled or sites-available. I'm pretty sure the site is currently executing the directives of /etc/httpd/conf.d/ssl.conf . I would like to do a a2dissite ssl, then reload the Web Server. How to do achieve this ?

  Read the article

• Site crawler/spider that tosses results into mysql

  - by ian.evans

  It's been suggested that we use mysql for our site's search as it'd be running on the same server that hosts our web server (nginx) and our db (mysql). Since not all of our pages are created from the database, it's been suggested that we have a crawler that can crawl the site, and toss the page url and data into mysql and have sphinx index on that. Does anyone know of an open source spider that has a mysql storing option out of the box. Thanks.

  Read the article

• sqlite : Fatal error: Call to undefined function sqlite_escape_string()

  - by Tristan

  Hello, I use a script who recquires SQLITE, on my previous hoster, it works, on local it works, on my new dedicaced server, it doesn't, i use PHP5 of course, on this link, you have a phpinfo() of the server. http://bit.ly/bXlLT1 Could you tell me what/how (apt get?) to install correctly sqlite to avoid this fatal error? Thanks

  Read the article

• Novell sles replica problem

  - by lilott8

  We have a sles10 sp2 oes2 sp1 server that is in eDirectory as a replica server. However in our ds ring it is not showing up. It shows up as synched for time but it will not show up in our replica ring. Any ideas?

  Read the article

• Iptables config breaks Java + Elastic Search communication

  - by Agustin Lopez

  I am trying to set up a firewall for a server hosting a java app and ES. Both are on the same server and communicate to each other. The problem I am having is that my firewall configuration prevents java from connecting to ES. Not sure why really.... I have tried lot of stuff like opening the port range 9200:9400 to the server ip without any luck but from what I know all communication inside the server should be allowed with this configuration. The idea is that ES should not be accessible from outside but it should be accessible from this java app and ES uses the port range 9200:9400. This is my iptables script: echo -e Deleting rules for INPUT chain iptables -F INPUT echo -e Deleting rules for OUTPUT chain iptables -F OUTPUT echo -e Deleting rules for FORWARD chain iptables -F FORWARD echo -e Setting by default the drop policy on each chain iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -P FORWARD DROP echo -e Open all ports from/to localhost iptables -A INPUT -i lo -j ACCEPT echo -e Open SSH port 22 with brute force security iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --set --name SSH --rsource iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 4 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j LOG --log-prefix "SSH brute force " iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --update --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT echo -e Open NGINX port 80 iptables -A INPUT -p tcp --dport 80 -j ACCEPT echo -e Open NGINX SSL port 443 iptables -A INPUT -p tcp --dport 443 -j ACCEPT echo -e Enable DNS iptables -A INPUT -p tcp -m tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p udp -m udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT And I get this in the java app when this config is in place: org.elasticsearch.cluster.block.ClusterBlockException: blocked by: [SERVICE_UNAVAILABLE/1/state not recovered / initialized];[SERVICE_UNAVAILABLE/2/no master]; at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:292) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1185) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:537) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:475) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:304) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:228) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:300) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:195) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:700) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:760) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:482) at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:403) Do any of you see any problem with this configuration and ES? Thanks in advance

  Read the article

• NRPE Warning threshold must be a positive integer

  - by Frida

  OS: Ubuntu 12.10 Server 64bits I've installed Icinga, with ido2db, pnp4nagios and icinga-web (last release, following the instruction given in the documentation, installation with apt, etc). I am using icinga-web to monitor my hosts. For the moment, I have just my localhost, and all is perfect. I am trying to add a host and monitor it with NRPE (version 2.12): root@server:/etc/icinga# /usr/lib/nagios/plugins/check_nrpe -H client NRPE v2.12 The configuration looks good. I've created a file in /etc/icinga/objects/client.cfg as below on the server: root@server:/etc/icinga/objects# cat client.cfg define host{ use generic-host ; Name of host template to use host_name client alias client.toto address xx.xx.xx.xx } # Service Definitions define service{ use generic-service host_name client service_description CPU Load check_command check_nrpe_1arg!check_load } define service{ use generic-service host_name client service_description Number of Users check_command check_nrpe_1arg!check_users } And add in my /etc/icinga/commands.cfg: # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -a $ARG2$ } # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe_1arg command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ } But it does not work. These are the logs from the client: Dec 3 19:45:12 client nrpe[604]: Connection from xx.xx.xx.xx port 32641 Dec 3 19:45:12 client nrpe[604]: Host address is in allowed_hosts Dec 3 19:45:12 client nrpe[604]: Handling the connection... Dec 3 19:45:12 client nrpe[604]: Host is asking for command 'check_users' to be run... Dec 3 19:45:12 client nrpe[604]: Running command: /usr/lib/nagios/plugins/check_users -w -c Dec 3 19:45:12 client nrpe[604]: Command completed with return code 3 and output: check_users: Warning t hreshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:45:12 client nrpe[604]: Return Code: 3, Output: check_users: Warning threshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx port 32129 Dec 3 19:44:49 client nrpe[32582]: Host address is in allowed_hosts Dec 3 19:44:49 client nrpe[32582]: Handling the connection... Dec 3 19:44:49 client nrpe[32582]: Host is asking for command 'check_load' to be run... Dec 3 19:44:49 client nrpe[32582]: Running command: /usr/lib/nagios/plugins/check_load -w -c Dec 3 19:44:49 client nrpe[32582]: Command completed with return code 3 and output: Warning threshold mu st be float or float triplet!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLO AD15 Dec 3 19:44:49 client nrpe[32582]: Return Code: 3, Output: Warning threshold must be float or float trip let!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx closed. Have you any ideas?

  Read the article

• Windows 7 Sysprep unattended doesn't work!

  - by Steven

  Hi all, I have a Windows 7 machine that I have run Sysprep on using the following command Sysprep /generalize /oobe /shutdown /unattend:c:\sysprep.xml When the PC shutsdown I upload it to my Windows Deployment Server (2008 R2), when I turn the PC back on the unattended install works fine, if I download the image from the deployment server it ignores the unattended install and I get prompted for all the settings. Any ideas why this would be? Many many thanks Steven

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• Apache2 & .htaccess : Apache ignoring AccessFile

  - by Elyx0

  Hi there here is my server configuration: DEBIAN 32Bits / PHP 5 / Apache Server version: Apache/2.2.3 - Server built: Mar 22 2008 09:29:10 The AccessFiles : grep -ni AccessFileName * apache2.conf:134:AccessFileName .htaccess apache2.conf:667:AccessFileName .httpdoverride All the AllowOverride statements in my apache2/ folder. mods-available/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-available/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit mods-enabled/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-enabled/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit sites-enabled/default:8: AllowOverride All sites-enabled/default:14: AllowOverride All sites-enabled/default:19: AllowOverride All sites-enabled/default:24: AllowOverride All sites-enabled/default:42: AllowOverride All The sites-enabled/default file : 1 <VirtualHost *> 2 ServerAdmin [email protected] 3 ServerName mysite.com 4 ServerAlias mysite.com 5 DocumentRoot /var/www/mysite.com/ 6 <Directory /> 7 Options FollowSymLinks 8 AllowOverride All 9 Order Deny,Allow 10 Deny from all 11 </Directory> 12 <Directory /var/www/mysite.com/> 13 Options Indexes FollowSymLinks MultiViews 14 AllowOverride All 15 Order allow,deny 16 allow from all 17 </Directory> 18 <Directory /var/www/mysite.com/test/> 19 AllowOverride All 20 </Directory> 21 22 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ 23 <Directory "/usr/lib/cgi-bin"> 24 AllowOverride All 25 Options ExecCGI -MultiViews +SymLinksIfOwnerMatch 26 Order allow,deny 27 Allow from all 28 </Directory> 29 30 ErrorLog /var/log/apache2/error.log 31 32 # Possible values include: debug, info, notice, warn, error, crit, 33 # alert, emerg. 34 LogLevel warn 35 36 CustomLog /var/log/apache2/access.log combined 37 ServerSignature Off 38 39 Alias /doc/ "/usr/share/doc/" 40 <Directory "/usr/share/doc/"> 41 Options Indexes MultiViews FollowSymLinks 42 AllowOverride All 43 Order deny,allow 44 Deny from all 45 Allow from 127.0.0.0/255.0.0.0 ::1/128 46 </Directory> 47 48 49 50 51 52 53 54 </VirtualHost> If i change any Allow from all in Deny from all , it works whenever i put it. I've got one .htaccess at /mysite.com/.htaccess & one at /mysite.com/test/.htaccess with: Order Deny,Allow Deny from all Neither of them work i can still see my website. I've got mod_rewrite enabled but i don't think it does anything here. I've tried almost everything :/ It works on my local environnement (MAMP) but fails when on my Debian server.

  Read the article

• Executing Oracle SQLPlus in a Powershell Invoke-Command statement against a remote machine

  - by Scott Muc

  We have a basic powershell script that attempts to execute SQLPlus.exe on a remote machine. The remote does not have Oracle Instant client installed, but we have bundled all the necesary dlls in a remote folder. For example we have sqlplus.exe and dependencies in the directory C:\temp\oracle. If I navigate to that path on the remote server and execute sqlplus.exe it runs just fine. I get the prompt for username. If I go: Invoke-Command -comp remote.machine.host -ScriptBlock { C:\temp\oracle\sqplus.exe } I get the following: Error 57 initializing SQL*Plus + CategoryInfo : NotSpecified: (Error 57 initializing SQL*Plus:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Error loading message shared library Thinking that it's potentially a PATH issue I tried the following: Invoke-Command -comp remote.machine.host -ScriptBlock { $env:ORACLE_HOME= "C:\temp\oracle"; $env:PATH = "$env:ORACLE_HOME; C:\temp\oracle\sqlplus.exe } This had the same result. The error code is not very helpful and is extremely frustrating since it does work when I log on to the machine. What is powershell remoting doing that's making this not work?

  Read the article

• XServe won't let me log in

  - by niklassaers

  Hi guys, After a power-failure, my Xserve won't let me log in on the login screen. I can still SSH into the box and access its other services, but the login box just shakes when I write either a local username and password or an ldap based username and password (this server is the LDAP server). Any suggestions on how I can go about solving this problem? Cheers Nik

  Read the article

• subdomain on another ip address

  - by pixeline

  hello, my main domain (domain.com) sits on a server with ip address 1. I need to have a subdomain (forum.domain.com) point to a server with ip address 2. Both servers are hosted at iWeb, so i have a cPanel interface to manage them, but i can't find the right way to do that. I tried a .htaccess redirection, which works, but the visible address in the browser changes too. Any help on how to do that would be appreciated. Thank you

  Read the article

• syslog-ng and nging logs to mysql

  - by Katafalkas

  So couple of days ago I asked how to log php and nginx logs to centralized MySQL database, and m0ntassar gave a perfect answer :) cheer ! The problem I am facing now is that I can not seem to get it working. syslog-ng version: # syslog-ng --version syslog-ng 3.2.5 This is my nginx log format: log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; syslog-ng source: source nginx { file( "/var/log/nginx/tg-test-3.access.log" follow_freq(1) flags(no-parse) ); }; syslog-ng destination: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("superpasswd") database("syslog") table("nginx") columns("remote_addr","remote_user","time_local","request","status","body_bytes_sent","http_ referer","http_user_agent","http_x_forwarded_for") values("$REMOTE_ADDR", "$REMOTE_USER", "$TIME_LOCAL", "$REQUEST", "$STATUS","$BODY_BYTES_SENT", "$HTTP_REFERER", "$HTTP_USER_AGENT", "$HTTP_X_FORWARDED_FOR")); }; MySQL table for testing purposes: CREATE TABLE `nginx` ( `remote_addr` varchar(100) DEFAULT NULL, `remote_user` varchar(100) DEFAULT NULL, `time` varchar(100) DEFAULT NULL, `request` varchar(100) DEFAULT NULL, `status` varchar(100) DEFAULT NULL, `body_bytes_sent` varchar(100) DEFAULT NULL, `http_referer` varchar(100) DEFAULT NULL, `http_user_agent` varchar(100) DEFAULT NULL, `http_x_forwarded_for` varchar(100) DEFAULT NULL, `time_local` text, `datetime` text, `host` text, `program` text, `pid` text, `message` text ) ENGINE=InnoDB DEFAULT CHARSET=latin1 Now first thing that goes wrong is when I restart syslog-ng: # /etc/init.d/syslog-ng restart Stopping syslog-ng: [ OK ] Starting syslog-ng: WARNING: You are using the default values for columns(), indexes() or values(), please specify these explicitly as the default will be dropped in the future; [ OK ] I have tried creating a file destination and it all works fine, and then I have tried replacing my destination with: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("kosmodromas") database("syslog") table("nginx") columns("datetime", "host", "program", "pid", "message") values("$R_DATE", "$HOST", "$PROGRAM", "$PID", "$MSGONLY") indexes("datetime", "host", "program", "pid", "message")); }; Which did work and it was writing stuff to mysql, The problem is that I want to write stuff to in exact format as nginx log format is. I assume that I am missing something really simple or I need to do some parsing between source and destination. Any help will be much appreciated :)

  Read the article

• Postfix send remotely for X account

  - by Ben Scobie

  I setup Postfix a few days ago to deliver email bound for my host name remotely instead of locally as I want email sent to my remote [email protected] account without trying to be sent locally. However, this causes a problem as it tries to send local bound mail(root) to my remote server as well ([email protected]). I would like E-mail bound for [email protected] to be sent to the remote server(GMail Apps in this case) and everything else sent locally(using the alias file perhaps), is this possible? My current configuration: http://pastebin.com/htwSQB61

  Read the article

• After Switching from Apache to Nginx, HTML Truncated

  - by Ben Buras

  Our site was running fine with Apache, but I am switching us over to Nginx (with php-fastcgi) to be more scalable. Everything is working fine except our HTML gets truncated sometimes (usually on large pages). Live server running Apache: http://bros4bros.com/index.php?action=browse_members&members_page=50 (WARNING: half naked guys!) New server running Nginx: http://50.56.238.208/index.php?action=browse_members&members_page=50 I have tried modifying these settings with no avail: max_execution_time fastcgi_send_timeout

  Read the article

• Difference ProxyPass and RewriteRule

  - by Wesho

  I just came across a case where ProxyPass (ProxyPassMatch to be exact) is being used in an Apache configuration file. This mod_proxy rule is being used to proxy from a whole cluster to one specific server, when a certain file is requested which only resides on that server. Now I'm a bit confused since I can't grasp why something like this cannot be achieved using a RewriteRule. So in essence I want to ask: What is the difference between ProxyPassMatch and a RewriteRule in this case?

  Read the article

• How can I create a graph of Nginx responses by HTTP status code?

  - by rmh

  I'm looking to create a graph somewhat similar to this: But instead of graphing requests, graph responses, with a line for each HTTP response code (200 OK, 404 Not Found, 500 Server Error, etc). Creating the graph isn't the issue (use RRDtool, Server Density or something similar), but how can I best retrieve this information from Nginx? Unfortunately, this data isn't available on the page generated by NginxHttpStubStatusModule. If it was, this would be pretty easy.

  Read the article

• Strict security and virtual host isolation with Nginx?

  - by Hach-Que

  I currently have an Apache web server set up under which each virtual host is isolated using HTTPD-ITK and the AppArmor module. Each virtual host's workers are setuid/setgid by the server and are then placed in an AppArmor profile. I'm looking to use Nginx but I can't find any documentation on setting it up so that rather than the worker processes being shared between all virtual hosts, worker processes are per virtual host (and thus can be setuid / setgid). Is there any way to do this under Nginx?

  Read the article

• Bind9 virtual subdomains

  - by Steffan

  I am trying to setup virtual subdomains using Bind9, following this tutorial.. http://groups.drupal.org/node/16862 which I've completed. Basically setting up the zone and modifying the resolv.conf file and the named.conf.local file. I've gotten everything to work, and I am able to from my server ping mydomain.com , test.mydomain.com and when i do a dig I get the following.. ; <<>> DiG 9.7.0-P1 <<>> test.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 32606 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1 ;; QUESTION SECTION: ;test.mydomain.com. IN A ;; ANSWER SECTION: test.mydomain.com. 86400 IN A 174.###.###.# ;; AUTHORITY SECTION: mydomain.com. 86400 IN NS mydomain.com. ;; ADDITIONAL SECTION: mydomain.com. 86400 IN A 174.###.###.# ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Wed Jan 19 21:06:01 2011 ;; MSG SIZE rcvd: 86 So it looks like everything is working. However, when I try and do test.mydomain.com in the browser, expecting it to default for now to mydomain.com it does not work and I get a server not found page in Firefox. I did read elsewhere that in your virutalhosts file you also need to setup a *.mydomain.com alias, but that didn't fix anything. Any other information that I could provide to help troubleshoot, or any troubleshooting suggestions? I am using Ubuntu 10.4, with typical LAMP setup. The only other things installed on the server are Bind9 and ftp client.

  Read the article

• Strange behaviour of Apache with network drive

  - by AMIT

  Hii all, Am runnnig Apache web server in front of mongrel server and mapped a network drive on my system.In my application miongrel is doing file upload to network drive and apche is serving file from network . But i disconnected the network drive and what strange behaviour am getting still am able to uplaod as well as download files to and from network drive .could anyone tell me why is it so. Am on windows NT machine

  Read the article

• In search of a network file system with extended caching to speed up file access

  - by Brecht Machiels

  I'm running a small home server that stores my documents. The disks in this server are in a RAID 1 configuration (using Linux md) and it's also periodically being backup up to an external hard drive to make sure I don't lose them. However, I'm always accessing the files from other computers on the home network using an SMB share, and this results in a considerable speed penalty (especially when connected over WLAN). This is quite annoying when editing large files, such as digital camera RAWs, for example. I've been looking for a solution to this problem. It would have to offer some kind of local caching to speed up the file access. The client would preferably not keep a copy of all data on the server, as it consists of a very large collection of photographs, most of which I will not access frequently. Instead, it should only cache the accessed files and sync the changes back in the background. Ideally, it would also do some smart read-ahead (cache the files that are in the same directory as the currently opened file, for examples), but I suppose that's asking a bit much. Synchronization should be automatic (on file change). Conflicting file changes (at the same time on different clients) are unlikely to happen in my use case, but I would prefer if they are handled properly (notification to the user). I've come across the following options, so far: something similar to Dropbox. iFolder seems to be the only thing that comes close, but its reputation (stability) and requirements put me off. A distributed file system such as OpenAFS. I'm not sure this will speed up file access. It is probably overkill for what I need. Maybe NFS or even Samba offer these possibilities. I read a bit about Windows' Offline Files, but its operation seems limited (at least on Windows XP). As this is just for personal use, I'm not willing to spend a lot of money. A free solution would be preferred. Also, the server needs to run on Linux, and I need a client for at least Windows.

  Read the article

• Move OWA to new URL

  - by Sadiq Jaffer

  I have a single Exchange 2010 server running all roles. OWA is currently configured for the url https://owa.currentwebsite/owa I'm trying to work out how to move OWA to https://owa.newwebsite/owa Does anyone know of a guide on how to do this? What I've done so far. Created a new zone in public DNS for new website. Created A record for OWA in new zone Created SRV record for autodiscover in new zone Created MX records in new zone Installed new SSL cert onto Exchange server

  Read the article

< Previous Page | 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549  | Next Page >