Search Results

Search found 5756 results on 231 pages for 'cpu utilization'.

Page 155/231 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• large RAID 10 vs small RAID1

  - by user116399

  The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

  Read the article

• DIagnosing another Windows 7 Lockup

  - by MSEoris

  Im running windows 7 on a fairly modern machine (8gb ram, amd fx-6100, gtx 560ti) and I notice that periodically my windows seems to just hang for a little while. Frequently this occurs after a cold boot and i start up five or six small to medium sized programs, but also occasionally it occurs during normal usage. Basically what occurs is the screen locks up, there is no keyboard responsiveness for a period of 30 seconds to a full minute - after a bit of patience, control is returned, but I'm interested in figuring out what is causing such lockups. I checked the event log and dont see any issues, and all i can see in task manager is a spike in cpu and memory usage right after this occurs. Any tips on how to even begin to diagnose this? Thanks.

  Read the article

• What is Paging in memory management?

  - by Fasih Khatib

  I was just reading Operating System Principles by Silberschatz et al when I came across paging in memory management.I'm slightly confused about it. It states that Physical Memory(I assume it's RAM) is divided into frames, and logical memory is divided into pages. CPU generates logical addresses containing page number and an offset. This page number is used to retrieve the frame number from a page table which gives the base address so the physical address is calculated as base+offset. My question is: is the page table maintained for every process? I logically think that the answer would be yes as every process will need to map its own pages to frames. I may be wrong. Please clarify. Also: paging and segmentation(where 'holes' are created in memory) are two totally different techniques that are not used in combination. Correct?

  Read the article

• aptana/eclipse blocks other apps

  - by waquner

  Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

  Read the article

• Server OS: put it on a separate drive? Yes, no, or depends on the situation?

  - by captainentropy

  Hi, I would like opinions, or facts, both preferably, on whether it's ok to install a server's OS on the RAID array or not. I would predict installation on separate drives is the best but I'm interested in the performance. The server in question will have 8 cores (2.4GHz ea.), 24GB RAM, and ~16TB of usable space of server-class drives in RAID10. There is also a subsytem of an ~equivalent size for backup. I will be running CPU/memory intesive applications on this server in addition to it being file storage for my work (research lab). IF I install the OS (haven't decided which one, probably Ubuntu or Fedora or some other good linux distro) on separate drives will there be any performance problems if they aren't configured in RAID10? IF it is better to have the OS on separate drives should I go for 150GB velociraptors in RAID1 or smallish SSD drives in RAID1? Money is unfortunately a factor as I think I'm close to maxing my budget as it is. Thanks!

  Read the article

• how to protect php app (vbulletin) from hackers

  - by samsmith

  Our vBulletin system is under constant attack, raising cpu load and making the system very slow for legit users. The attack is a script type attack that is attempting to log in and/or create new login ids (mostly it is trying to create login ids in order to spam the site). In vBulletin, we have black listed large ranges of ips, which has helped a lot, but the attacks continue. Is there an automated way to protect the application or web server? ideally, the protection would detect the pages accessed and automatically black list the ip.

  Read the article

• Linux freezes every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

• Real RAM latency

  - by user32569

  Hi, very quick question. When I look for RAM timing, I got 2 different explanations on what is CAS latency. First states, its the time after command to read has been issued from CPU and data are send to data bus. Second says its time betwen column in memory layout has been activated. So, where is the truth? I mean, when I want to know total RAM latenci, in case 1, ot would be just CAS times one clock time. In second case, it would be CAS+other things like RAstoCAS and so times one clock time. Thanks.

  Read the article

• How do I disable Windows Search Indexing Service while on battery on Windows 7?

  - by Slaggg

  Since upgrading from Windows XP to Windows 7, I've found laptop battery life is reduced. One issue is that the Windows Search Indexing Service is constantly running, even when on battery power. Using Resource Monitor shows it is often the top consumer of CPU time and top producer of disk activity. I imagine this is one of the primary reasons the battery is getting drained faster. I cannot find any options to tell Windows Search Indexing Service to not index while on battery power. The only solution seems to be to stop the service, and also disable the service (if you just stop it, it will restart itself after a while). Doing this gives me considerably more battery life, but it's a pain because I have to re-enable the service when plugged in again. Is there a better solution?

  Read the article

• Git completion __git_ps1 really slow on Mac

  - by mckeed

  I've had __git_ps1 in my bash prompt for a while, but just recently (I noticed it after I did some messing around with Homebrew and rbenv), it has slowed down my prompt horribly. When I'm in a git directory I have to wait 3-4 seconds after every command for the prompt to appear. If I just mash return and watch the Activity Monitor, it shows that distnoted and Finder are using more CPU than normal during the delay. Could something git-completion.bash is doing be triggering a notification to Finder? Maybe it involves folder actions or something?

  Read the article

• Sharing RAM resources between 2 or more computers

  - by davee44

  I know there was a somewhat similar question before: How to share CPU or RAM? But, let me just specify it a little more... When Microsoft Windows requires more RAM capacity than available it uses a swap-file to temporarily store the data there, this is actually something like a hard-drive-based RAM. This technology is used for many years. Theoretically, it shouldn't be too hard to implement a similar technology that uses the RAM of different computer(s) in the network for temporary data storage. This just requires a software that runs on computers in the network that accepts and returns data from/to the main computer and keep that data in the RAM; plus the operation system of the main computer must have the ability to use computers in the network instead of (or in addition to) the swap-file. I wonder, are there any implementations of this idea? This would allow users to build RAM clusters using all of their home or office computers, that will boost the performance of a single computer for some development/gaming/video tasks, etc.

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• Building a workstation computer for Image processing? [closed]

  - by echolab

  I am taking a gigapixel image my goal is 50gigapixel and shooting is almost done , i am doing some research to build a workstation so i can stitch images together , my questions is ! Could u suggest some dual cpu mainboard that works fine with xeon 5500+ , with 64GB+ ram support ? My other question is which hardware is most important in image processing , all i see in story of gigapixel panoramas is they have dual xeon and 32gb+ ram ? i wonder if i am doing this right , i mean they don't post information on graphic card , mainboard and stuff ! I did asked several websites , but nothing best answer was get some high-end workstation and plenty of hours , i don't want to purchase ready to use workstations, i wanna build it up Thanks in advance

  Read the article

• Offer me an ASP.NET & a SQL Server 2008 server specifications for about 2000 concurrent users, please.

  - by amkh

  We have a web application project wich will be created using ASP.NET 4.0, Entity Framework, and SQL Sever 2008 R2. To meet the needs, suppose a normal page of this application that has a query which it takes 10 miliseconds to response on a Core2 Quad @ 2.8GHz proccessor with 2x2GB of DDR3 Ram (EntityFramework overheads are considered). And we will have about 2000 concurrent user at peek times. So, what is the best recommended specifications (CPU/RAM/RAID/...) for the server which will be host this application? -- Or -- How can I calculate that?

  Read the article

• good books about server architecture?

  - by ajsie

  when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

  Read the article

• games and movies become too slow after some time

  - by ishaq

  On my gaming desktop, I was fixing my desktop's power supply when something seemed to burn (I got that stinging burning smell). However when I turned ON the computer (it was OFF before), everything seemed to be fine. However, I have noticed that now it becomes too slow if I play a game or movie on it. I am talking about the computer becoming painfully slow after about 5 minutes into the movie/game (it works fine otherwise e.g. browsing), it becomes so slow I can see individual frames from movies/games. What could be the problem? A fried video card? friend memory (RAM), something else? My system's configuration is: Intel Core i7 CPU 3.40GHz 8GB DDR3 RAM 2TB WDC HDD NVIDIA GeForece GT 220 (1GB) Thermal Take Commander MS1 Chassis ( http://www.thermaltakeusa.com/Product.aspx?S=1394&ID=2051 ) mainboard: Intel DH67CL AAG10212-208 Realtek High Definition Audio

  Read the article

• Hardware changes to require XP Activation ? (for a Virtual Machine)

  - by NVRAM

  I have WXP-64 running on a VM and, for testing and performance reasons, I would like to occasionally change the allocations for it. Changes might include: Number of CPU cores, Amount of RAM Add/remove network adapters. But I'm concerned that XP will demand re-activation and that I might eventually have licensing issues if I do this. So, can anyone tell me: What kind of changes trigger re-activation in XP? Is there limits or caveat with regard to re-activation? I've perused this question and the article it references, but wanted more recent and verified info. (FWIW, I'm not trying to cheat: the OS copy was purchased explicitly for the VM.)

  Read the article

• Open source monitoring tool without sending data to "Their Server"

  - by hangu

  I trying to use open source server monitoring tool. I know there are a lot, but I couldn't find what I need.. the basic process of monitoring tool I used to use before was, 1) Install agent in my server which I want to monitor 2) The agent send data to "their server" 3) I can check the health of my server through web browser presented by them. What I need is, avoiding "Step 2". Are there any monitoring tool that I can use? I have Windows 2008 and Linux servers simple feature will be enough like (CPU, Memory, Network..) Thank you

  Read the article

• It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

  - by dag729

  I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

  Read the article

• Is my laptop good enough to support my development needs? [closed]

  - by KodeSeeker

  I have an ASUS Pentium-R Dual Core CPU running at 2.20Ghz. It has 4 gb of built in ram, currently running a 64 bit Windows 7 . I just started graduate school and Im wondering whether I should go in for a new laptop or just repair the nagging battery on my current one. My requirements include - -Ability to support IDE's - I may end up running Eclipse, Visual Studio's and the like to help with my work. - Ability to run multiple VM's (not concurrently). Im currently running a Ubuntu 12 and 9 as VM's (not sure if this is overloading the system) - I'm a non gamer so I really dont care about a minor glitch caused by running a uber heavy game. -In addition I will have heavy use of Office Application Software and will be using my computer to watch movies and stream media. Looking forward to your replies and suggestions!

  Read the article

• Windows-Vista events: Diagnostics-Performance: How-To read this information?

  - by Ice

  Hi, i am wondering how long the bootprocess needs and looking in %SystemRoot%\system32\eventvwr.msc /s. Some entries marked as critical like : Starting needs : 184707ms, sometimes 211855ms or 269767ms Some Errors like: This process does many diskactivities and lower the performance of Windows: Filename : ntoskrnl.exe Why are the startups marked as critical? Are the values normal on a Dell Precision M90 (Intel Centrono Dual CPU, 2GB RAM, 80 GB Disk)? Some entries marked as Errors showing the time for shutdown, but there are some like this one i printed in this question, what is the meaning of this?

  Read the article

• Which motherboard for Intel i7 and how to get RAID working?

  - by jasondavis

  I am wanting to build a new PC, I have a couple questions. 1) I am wanting to go with the Intel Core i7 920 Processor, can anyone reccomend a good reliable motherboard for this processor? Graphics card support does not matter (sli-crossfire). I would like to support a lot of ram, so the more ram slots the better. I have read so many bad reviews about certain boards not working good, I would love recommendation from experience. 2) I am wanting to run a couple SSD drives in RAID-0, I have never done this, will I need to purchase anything additional to the MB and CPU and drives to get raid working?

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• How do I know if my disks are being hit with too much IO reads or writes or both?

  - by Mark F

  Hi All, So I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. But how do I really know what the max IO numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an IO bound problem. Is there a better way to predict when IO is reaching its limits? This article was interesting but not giving the answer I desire. "http://serverfault.com/questions/61510/linux-how-can-i-see-whats-waiting-for-disk-io". So is my best bet surrounding just looking at 'CPU IO WAIT'? There must be a more reactive method for this? Best, M

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >