Search Results

Search found 5885 results on 236 pages for 'monitor'.

Page 156/236 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• Network and log monitoring and vulnerability scanning

  - by user137799

  I am trying to find out if there is any application or service in UNIX that will - 1. Monitor network interfaces for bandwidth usage 2. When network flaps occur send out a e-mail. 3. When duplicate mac-addresses or loop occurs in network - send out alerts. 4. Do a network vulnerability scan and be able to detect utorrent application on our network. Need to know which linux distribution will be best to support that specific application Thanks

  Read the article

• Monitoring host and app parameters in real-time

  - by devopsdude42

  I have a bunch of VMs that I need to monitor in real-time. For all nodes I need to watch host parameters like load, network usage and free memory; and for some I need app-specific metrics too, like redis (some vars from the output of INFO command) and nginx (like requests/sec, avg. request time). Ideally I'd also like to track some parameters from the custom apps that run on these node too. These parameters should get tracked as a bunch of line charts on a dashboard. I checked out graphite and it looks suitable (although the UX and aesthetics looks like it needs some love). But setting up and maintaining graphite looks to be a pain, esp. since we don't have a full-time person just for this. Are there any alternatives? Or at least something that is simpler to setup and will scale? Reasonable paid services are also ok.

  Read the article

• Lenovo ThinkPad: What does the PWMDBSVC.exe service do? It's writing a C:\Log.txt file.

  - by thinkPadUser

  I found a file that keeps popping up in my C:\ drive root, Log.txt ... after installing Process Monitor and seeing what process was writing to it, I came across PWMDBSVC.exe, which appears to be part of the Lenovo ThinkPad software. Even if I delete it, I can get it to re-create the Log.txt when I lock and unlock my workstation. Does anybody know what this software does and whether it is safe to disable? I searched Google already and got the usual pile of useless hits on the process name but nothing seemingly definitive!

  Read the article

• Distributed Nagios Installation

  - by kruczkowski

  I'm looking for a plug-in or product that will act as a remote probe and perform tests then send back the results to the central Nagios server. Reason for this is that I'd like to monitor internal systems and servers at customers, but don't want to allow all the traffic passing the firewalls. Ideally I'd like a soft-probe that would be installed and then perform the tests and send back the results (via SSH) to the central Nagios installation. Does anyone know of a product or plug-in that would offer such service? If not Nagios, is there any other monitoring system that does such a thing (ideally open-source)?

  Read the article

• Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

  - by Ryan

  I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

  Read the article

• Delay before booting with laptop

  - by Priednis

  I have almost the same problem as in Delay before booting? My computer is a practically new (couple months) Lenovo X200 Tablet (System Model 7449FXG). So when I press the power button, the indicator light that means "computer is on" turns on, but nothing else happens for about 5 mins, after that the computer starts booting normally. The same happens also on restart. And no USB or any other device for that matter is plugged in to the computer. And at the delay time the monitor is blank - actually not on at all.

  Read the article

• Lenovo G530 laptop screen flicker

  - by Kevin

  I have a Lenovo G530 laptop that has an issue with screen flicker that is getting worse. The computer screen will start going thru a crazy screen flicker then will stop and start again. I have already checked cable connection to lcd on motherboard and reseated connection as someone suggested in another posting I found online that resolved issue. I am starting to think it might be a bad inverter or screen because I have hooked up laptop to external monitor and it is running fine with no flickering happening when the flickering is occurring on laptop. I am attaching a link to a small video I shot of the issue as it is occurring on laptop screen. Does anyone have any further suggestions? Bad inverter or screen? Screen flicker vid

  Read the article

• What is a good solution for an adaptive iptables daemon?

  - by Matt

  I am running a series of web servers and already have a pretty good set of firewall rules set up, however I'm looking for something to monitor the traffic and add rules as needed. I have denyhosts monitoring for bad SSH logins, and that's great - but I'd love something I could apply to the whole machine that would help prevent bute force attacks against my web applications as well, and add rules to block IPs that display evidence of common attacks. I've seen APF, but it looks as though it hasn't been updated in several years. Is it still in use and would it be good for this? Also, what other solutions are out there that would manipulate iptables to behave in some adaptive fashion? I'm running Ubuntu Linux, if that helps.

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• What's an easy way to shut down a computer that I'm connected to via RDP

  - by MBraedley

  I have a secondary machine on my local network that I usually use via RDP. Most of the time, it's on 24/7, but there are times when I may want to shut it down from the RDP client machine. The shutdown and restart options aren't available from the Windows XP start menu when you connect to a machine via RDP, so how can I shut this machine off without actually going to the physical machine? Also note that this computer currently doesn't have a monitor attached to it, which is partly why I want to be able to shut it down over RDP.

  Read the article

• How to convert Kindle books into PDF format?

  - by verve

  I'm new to digital books and I use the Kindle app for Windows to read the books I bought but I hate how I can't read the bottom paragraph of a book in the Kindle app in the centre of the monitor; I have to bend my neck down and it gets sore fast. Problem is that I can't move the Kindle book page up or halfway as when I'm reading a PDF document; if you try to move the page in Kindle it skips to the next new page. So, I thought maybe converting my books to PDF will solve the problem. How do I convert Kindle books into the PDF format? Does anyone have another solution? Perhaps a fancier reader that allows me to scroll Kindle book pages? Windows 7 64-bit IE 8

  Read the article

• Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - ASUS M3A78-EM

  - by kamleshrao

  Hi Guys, AMD PC Motherboard - ASUS M3A78-EM (installed VGA drivers from ASUS website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

  Read the article

• Configure Ubuntu9.10 to see hardware of my laptop

  - by michael

  I have installed Ubuntu 9.10 on my laptop. But it can't see all the hardware of the laptop. I would like some help. my laptop has 8G (in Windows7), but Ubuntu only see 2.9G (I get this value from System Monitor under Resource tab my laptop can have 1600x900 resolution (it works in Windows7), but i can only set to 1280x800 in Ubunutu my wireless card does not work. But my wired connection works. Can you please help me in configuring my Ubuntu environment?

  Read the article

• how to troubleshoot shutdown problems in windows 7

  - by Ieyasu Sawada

  I have a desktop with windows 7 ultimate installed. Whenever I shut it down from the start button. The text that says that it is logging off and shutting down is present and the monitor blacks out and says no signal. But the lights in the RAM is still on and all the fans in the desktop is still spinning. Why is that? It seems like its not shutting down completely. I have also got disk problems lately. Event id 175 and 50. Which I think is caused by the computer not shutting down completely. How do I troubleshoot this one? Feel free to ask if you need more details, thanks.

  Read the article

• Office jukebox systems

  - by Jona

  We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

  Read the article

• How do I lower idle cpu usage in ubuntu linux? Gnome or KDE Variants

  - by Jasen

  My question comes from a kde desktop currently, but it also happens with the gnome instance. When just sitting there, with only the cpu monitor widget running. no open windows, no background processes other than the desktop, my cpu is at ~20%. I wanna know how to fix this, and possibly get better performance out of it. When running my windows side, the cpu will sit at zero, and i generally load new programs about 400ms faster. With windows 7 being as slow as it is, this is not acceptable. and the widget is only set to check every 500ms, so im almost completely sure its not the widget. My system is a Gateway nv 53 amd 2.0 ghz turion with 4 gb of installed ram, and 500 gb hd. both linux and windows are 64 bit. average ram use on either system is about 1.4 gb for just the os

  Read the article

• Cannot install Oracle Application server

  - by ziftech

  After succesfull installation of database 10g server, I cannot run install file for application server - it closed unexpectly. How can be problem investigated? Log file contains: Checking installer requirements... Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 5.2 Passed Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed Checking swap space: must be greater than 1535 MB. Actual 4092MB Passed Checking Temp space: must be greater than 150 MB. Actual 5083 MB Passed All installer requirements met.

  Read the article

• What is the worst Mac OS X annoyance in your opinion?

  - by jasonh

  I'll start with multi-monitor support. I'm trying to set up a Macbook to use an external display and I can't for the life of me get it to move the Dock over to the external display. That and it won't let me disable the Macbook's internal LCD. Please put one item into each post so that the community can vote on each issue. Also please list any workaround if you have it and what version of the OS it applies to. Thanks!

  Read the article

• Lock Windows keyboard and mouse but still display screen normally

  - by Stephen Lacy

  I'm using windows 7, I have a dual monitor display. It displays important information related to the business, I'd rather that random users that walk in can't just walk over to it and start using the computer with the same access rights as the user the monitoring software is running as. What I would like is if any time someone presses a button on the keyboard including alt-ctrl-delete all that would appear is a dialog asking for a password. Then I can click cancel and it will return to showing the data I want displayed. ClearLock doesn't work I tried it btw

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Create intentional border with xrandr

  - by benizi

  Is there a way to tell xrandr "this space intentionally left blank"? I have a laptop that drives its internal display at 1920x1080, but the external monitor I'm using, due to its different aspect ratio, doesn't have that mode. It runs at 1920x1200. So, the basic setup: xrandr \ --output LVDS-1 --mode 1920x1080 \ --output DP-1 --mode 1920x1200 --same-as LVDS-1 [not to scale:] +-----------------------------------+ ¦ ¦ ¦ ¦ (laptop) ¦ (external) ¦ ¦ (LVDS-1) ¦ (DP-1) ¦ ¦ ¦ ¦ ¦ ¦ ¦ +-----------------¦ ¦ (blank...) ¦ ¦ +-----------------+ How can I specify that the 1920x120-sized region below LVDS-1 should be displayed as a black bar that can't be accessed by mouse on DP-1? I tried just coping with --panning 1920x1200+0+0/1920x1080+0+0/0/0/0/120, but I found the screen movement to be very annoying. Update: I found a workaround. (Update 2: changed it to an answer, per suggestion -- workaround doesn't answer the underlying question of leaving space blank.)

  Read the article

• How to check if redis master is OK?

  - by e-satis

  On the documentation, they advice the monitor command. But it has a 50% performance penalty for the whole system, and how should I do that ? Whatching the ouput using SSH until I don't see anything ? Let's say I have 3 servers: 1 with a redis master, 1 with a redis slave, and one with my website querying the redis master. How can I, from my website server, make cleany the decision to fallback to the slave by sending the SLAVEOF NO ONE command ? My first step would be to put some kind of timeout check with a simple ping, just to be sure the server is online. But for redis specifically, I have no clue.

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

• In CentOS 4.3 Webmin 1.3000 bandwidth monitoring is eating disk space. How to delete those files?

  - by Silkograph

  I maintain Linux server being used for Mail, Squid and DNS service. Recently I observed that something was eating server disk space. But at last, today I caught the culprit which was consuming the disk by storing large number of files. On this server, Webmin 1.300 is installed. We use Squid proxy and Sarg to monitor Internet access. I always manually clear Sarg generated files under /var/www/html/squid for last few years. But I never realized that Webmin is also storing some kind of bandwidth log files in its' directory structure. I have noticed that under /etc/webmin/bandwidth/hours it has stored more thousands of files since year 2007 totaling about 17 GB. We have used 40 GB HDD for this server machine. My question is how can I delete those (/etc/webmin/bandwidth/hours) files safely?

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >