Search Results

Search found 5762 results on 231 pages for 'backup sqldatabase'.

Page 157/231 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• RAID5 on SmartArray P410i online resize

  - by datacompboy

  I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

  Read the article

• How to selectively route network traffic through VPN on Mac OSX Leopard?

  - by newtonapple

  I don't want to send all my network traffic down to VPN when I'm connected to my company's network (via VPN) from home. For example, when I'm working from home, I would like to be able to backup my all files to the Time Capsule at home and still be able to access the company's internal network. I'm using Leopard's built-in VPN client. I've tried unchecking "Send all traffic over VPN connection." If I do that I will lose access to my company's internal websites be it via curl or the web browser (though internal IPs are still reachable). It'd be ideal if I can selectively choose a set of IPs or domains to be routed through VPN and keep the rest on my own network. Is this achievable with Leopard's built-in VPN client? If you have any software recommendations, I'd like to hear them as well.

  Read the article

• Minidump folder cannot be found

  - by Saxtus

  Although I have enabled the creation of minidump files in my system, it appears that either Windows doesn't create them where the Startup and recovery dialog points to (%SystemRoot%\Minidump) or at least I can't find them. Even the Minidump folder under Windows directory is missing and I had numerous BSODs till now. I've searched all my HDs for mini*.dmp files only to find some old ones in a backup folder from my Vista 32-bit installation, before I install Windows 7 64-bit. Any thoughts of why this is happening and how to fix it?

  Read the article

• How can I connect a SAS drive to USB? [closed]

  - by dave

  I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

  Read the article

• Unable to create system partition or locate existing system partition during Windows-7 installation

  - by glenneroo

  I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

  Read the article

• Snow Leopard: Optimization

  - by Shyam

  Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

  Read the article

• Resize Ubuntu Linux system to smaller disk inside VMware ESXi

  - by mlambie

  I have several Ubuntu Linux virtual machines running on VMware ESXi hosts that have all been allocated disks much larger than their required capacity. As space is now becoming an issue on our SAN, I'd like to investigate downsizing the allocated disk space on these machines. All systems will be completely backed up imaged before I begin making changes, and I will always retain a pristine backup in case the partition resizing does not work. Is there an easier way than the following procedure, or is their a better solution entirely? Shutdown and assign a second disk to the virtual machine Boot using the SystemRescueCD Use GParted to resize the original (source) partition, making it smaller Clone the new, smaller partition to the second disk Shutdown and remove initial disk from the virtual machine Reboot and force fsck to check the filesystem

  Read the article

• Does SpinRite do what it claims to do?

  - by romandas

  I don't have any real (i.e. professional) experience with Steve Gibson's SpinRite so I'd like to put this to the SF community. Does SpinRite actually do what it claims? Is it a good product to use? With a proper backup solution and RAID fault tolerance, I've never found need for it, but I'm curious. There seems to be some conflicting messages regarding it, and no hard data to be found either way. On one hand, I've heard many home users claim it helped them, but I've heard home users say a lot of things -- most of the time they don't have the knowledge or experience to accurately describe what really happened. On the other hand, Steve's own description and documentation don't give me a warm fuzzy about it either. So what is the truth of the matter? Would you use it?

  Read the article

• Check if all files in a directory exists elsewhere

  - by aioobe

  I'm about to remove an old backup directory, but before doing so I'd like to make sure that all these files exist in a newer directory. Is there a tool for this? Or am I best off doing this "manually" using find, md5sum, sorting, comparing, etc? Clarification: If I have the following directory listings /path/to/old_backup/dir1/fileA /path/to/old_backup/dir1/fileB /path/to/old_backup/dir2/fileC and /path/to/new_backup/dir1/fileA /path/to/new_backup/dir2/fileB /path/to/new_backup/dir2/fileD then fileA and fileB exists in new_backup (fileA in its original directory, and fileB has moved from dir1 to dir2). fileC on the other hand is missing in new_backup and fileD has been created. In this situation I'd like the output to be something like fileC exists in old_backup, but not in new_backup.

  Read the article

• Sending Mail on Linux via Bash/Command line

  - by Fanvaron

  I'm currently trying to send mails via bash script on linux I searched the internet and found this code: echo "This is my body" | mail -s"this is my header" [email protected] I don't get any response either in the bash nor when I type it directly in the command line. I waited for at least 3 hours now and still got no mail. I just found that the log says stat=Deferred: Connection timed out with backup-mx.mcs.de. when sending to my Mail address but also has some entries with to<[email protected]> and stat=Sent greetings

  Read the article

• Losing windows XP files. How to retrieve them?

  - by ravi

  I have a portable 500 GB HDD.Since last few days, all files of some folder are getting kinda corrupted.I can't access/delete them. Here is the example. If I try to access these files/folders, I get following error. This thing is kinda spreading in my HDD.Till now it has affected two folders worth 70 GB.In which one folder is backup folder where all my important data resides.So I am really in loss if I loose this data. How can I retrieve this data? Please help.

  Read the article

• Compiling LaTeX document makes Google Drive crash

  - by Sander

  I've the issue that when I compile a LaTeX document that is located inside my Google Drive this will after a few turns make the OSX Google Drive application crash. As this is an important document I want to keep it all the time inside the Google Drive location to ensure cloud backup but this ofcourse is not guaranteed if this makes my Google Drive crash all the time. I don't seem te be able to identify what is causing this and I was hoping that maybe some people here have any idea what might cause this? We're talking about a 8 pages document with 3 images, so nothing crazy big or complex.

  Read the article

• Toolkit & Habits for Linux Network & System Administration [closed]

  - by slashmais

  I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

  Read the article

• VMware - I/O error - how to fix?

  - by Maya-G

  I'm running XP pro on VMware - it mounts and runs just fine. However, if I power down the VM and try to copy it, or even if I try to do a simple Mac Backup (using Carbon Copy Cloner), I get an i/o error at one very specific VMDK file. Here's a sample of the error - this from CCC: "12/20 22:49:30 Detected input/output error 12/20 22:49:33 rsync: read errors mapping "/Users/blahblah/Documents/Virtual Machines.localized/WindowsXP-Professional150G.vmwarevm/WindowsXP-Professional150G-000001-s065.vmdk": Input/output error (5)" How can I regain my ability to do backups of my Mac without this I/O error?

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• Best way to grow Linux software RAID 1 to RAID 10

  - by Hans Malherbe

  mdadm does not seem to support growing an array from level 1 to level 10. I have two disks in RAID 1. I want to add two new disks and convert the array to a four disk RAID 10 array. My current strategy: Make good backup. Create a degraded 4 disk RAID 10 array with two missing disks. rsync the RAID 1 array with the RAID 10 array. fail and remove one disk from the RAID 1 array. Add the available disk to the RAID 10 array and wait for resynch to complete. Destroy the RAID 1 array and add the last disk to the RAID 10 array. The problem is the lack of redundancy at step 5. Is there a better way?

  Read the article

• Debian Server Daemon: File sync

  - by Gehk

  Hello, I'm looking for a way to (auto) sync files on some pcs over the internet and save/backup them on my server. Just like Dropbox and other services like that. I found iFolder (by Novell), but it's not made for debian (i think it would still compile). I don't know if it's made for an webserver or just home server. Another way would be FTP, I don't know clients (i use ubuntu and windows on my pcs), which autoupload new/edited files. There is also svn/csv, but they are quite slow (afaik), and I don't know if there are suited for this. Someone got an idea? Thanks.

  Read the article

• Syncronizing multiple exchange servers 2007

  - by Mustafa Ismail Mustafa

  We're introducing a new exchange server for several reasons. After the introduction of the new server, and synchronizing it with the old one (mailboxes, contacts, rules, the whole shebang) we're going to be formatting the old machine, install XenServer 5.5 on it, and create a slices, one of which will have Exchange server, which again will need to be synchronized. Then, we'll have 2 different routes to the mail servers (mx1, mx2) so that if there is an outage on one, the other should be available. So now, I'm wondering how to synch? I can move a mailbox from one server to the other, and I'm sure that can be done in bulk, but that's not what I'm looking for. I'm looking to make both Servers equal, the first time so I can make a backup of the original, and the second time so that they can be made into peers. This is with Exchange 2007 on Windows 2008 R2 (x64) Suggestions? TIA

  Read the article

• ASP.NET Website not responding

  - by brinthhillerup

  Hello everybody I am setting with my server tech, trying to figure out what is going on here. When I try to access my site through a browser, my site hangs indefinately. It does not respond with anything, not even after 15 minutes! The application pool has been restarted, the website has been restarted. Doesn't helpt at all. It happened during an upload. A backup has been loaded and the problem is still the same It is a very urgent matter, I hope someone can help me! I think we are on a IIS 6 on a Windows 2003 Server. (Remote hosted, with a tech, who has no idea what the issue is as well, so I am trying to find the solution alogn with him). Any suggestions are VERY appriciated.

  Read the article

• How to do IIS SSL server redirects correctly? Is meta refresh needed?

  - by Jesse

  Hi all! I think our backend programmer/server admin is handling our SSL redirects pretty wonky - see it in action here: www.mchenry.edu/parentorientation First off, see how it redirects to index2.asp? Is this necessary? Can't she easily redirect to the original index.asp but have it be https:// instead? Also, she is using a meta refresh on the original index.asp page to redirect to index2.asp as well, and she says this is for backup, in case the server configs change and the server can't handle the redirect so then the webpage would take over. Finally, she said she tried using the server redirect solely but that it kept looping on itself- what did she do wrong? Is this even possible? Is she giving us a snow job or what? I want a better understanding of what is happening here so I can talk to my boss about it, because this is driving me up the wall. Thanks for any info you can provide.

  Read the article

• What type of malware can reside in windows restore?

  - by qwertymk

  I was reading aking1012's comment on How to create Windows Vista/Windows 7 Startup disk or Rescue disk or system restore points on a CD? . He says that: The first thing I usually do is disable system restore. Some REALLY nasty malware hides in there and is very difficult to delete. As far as rescue media, I make a full backup image. It doesn't directly address the question so it's a comment not an answer, but I thought it was worth noting What type of malware can hide there, and how is that possible as the restore info must be stored with a checksome to make sure it's not modified, right?

  Read the article

• Visible Keylogger (ie not evil)

  - by Ben Haley

  I want keylogging software on my laptop for lifelogging purposes. But the software I can find is targeted towards stealth activity. Can anyone recommend a keylogging software targeted towards personal backup. Ideal Functionality Runs publicly (like in the task bar). Easy to turn off (via keyboard shortcut is best... at least via button click) Encrypted log Fast Free Cross platform ( windows at least ) The best I have found is pykeylogger which does not attempt to be stealthy, but does not attempt to be visible either. I want a keylogger focused on transparency, speed, and security so I can safely record myself. *note: Christian has a similar question with a different emphasis

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Real time mirroring between two sql server databases

  - by Matt Thrower

  Hi, I'm a c# programmer, not a DBA and I've had the (mis)fortune to be handed a database admin task. So please bear this in mind when answering this question. What I've been asked to do is to create a real time two-way mirror between two databases with a 10 Megabit connection between them. So when either changes it updates the other. This is not a standard data mirroring/failover task where one DB is the master and the other is a backup - both are live and each needs to instantly reflect changes made to the other. In my head this sounds like a tall order, one which may even be impossible - after all in a rapidly changing environment with lots of users this is going to be massively resource intensive and create locks and queues of jobs all over the place. Is it possible? If so, can anyone either give me some basic instructions and/or point me at some places to start my reading and research? Cheers, Matt

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >