processor socket - Page 157

ubuntu 12.10 installation failure

- by Eidelmaim

Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

Read the article

I have a ESXi 5.0 installed and when I am Installing Ubuntu Server 12.04 LTS it is giving an error saying grub installation failed?

- by Rishee

I have a ESXi 5.0 installed and when I am Installing Ubuntu Server 12.04 LTS (32 bit) it is giving an error saying grub installation failed? Please check the below screenshot of the error. I have other Ubuntu servers running fine on this esxi server, so I don't think problem is with ESXi. I have 32 GB of ram spare on this ESXi and have given 2 GB of RAM to this 12.0 LTS VM. I have given 2 cores of processor. I have tried supplying different ISO Image to this VM as I thought the 1st image that I downloaded has errors.. But defiantly that's not the case as all 3 different ISO images that I downloaded of Ubuntu server 12.04 LTS (32-bit) can't be corrupt!! Just to make sure that the Image does not have problem I used that Image to install it for testing on stand alone system. it works fine there!! This is a production ESXi server with which I can't play with, how ever I can play whith the Ubuntu Server 12.04 LTS (32-Bit) VM that we have created on that ESXi. I need help on this as soon as possible. go live date of this server is really close. (This Question is already there on Super user and Server Fault.)

Read the article

intel atom getting too hot

- by user59565

I own an Asus 1215N which is getting very hot Intel Atom 525D dual core ION 2 (geforce 220 + GMA 3150) 4 GB RAM Ubuntu 12.04 it hits 86 C at idle. Some times (at load or turned on 1 hour) it shuts down due to heat, in Windows 7 it runs idle at 49 C. I tried an acpi call to shut down the nVidia chip which is cooled together with the Atom chip. That didn't solve the problem. To check up to see if it really turned off I checked how much power the laptop consumed, it only went from using 1400 mW to 860 mW, no changes in heat. I also tried reapply the standard heat adhesive, the old heat adhesive made it run at 97 (it couldn't even put up a useful install of Ubuntu). This really annoys me, as Ubuntu is the OS of choice to me. Should I try compile the kernel? Is it true that compile for a P4 is the better choice to the atom, when compiling the kernel for this processor architecture? Now I tried compiling the kernel for atom. Now temperature is 83 C (think the drop has more to do with ambient temp than the customized kernel) help appreciated

Read the article

Java stored procedures in Oracle, a good idea?

- by Scott A

I'm considering using a Java stored procedure as a very small shim to allow UDP communication from a PL/SQL package. Oracle does not provide a UTL_UDP to match its UTL_TCP. There is a 3rd party XUTL_UDP that uses Java, but it's closed source (meaning I can't see how it's implemented, not that I don't want to use closed source). An important distinction between PL/SQL and Java stored procedures with regards to networking: PL/SQL sockets are closed when dbms_session.reset_package is called, but Java sockets are not. So if you want to keep a socket open to avoid the tear-down/reconnect costs, you can't do it in sessions that are using reset_package (like mod_plsql or mod_owa HTTP requests). I haven't used Java stored procedures in a production capacity in Oracle before. This is a very large, heavily-used database, and this particular shim would be heavily used as well (it serves as a UDP bridge between a PL/SQL RFC 5424 syslog client and the local rsyslog daemon). Am I opening myself up for woe and horror, or are Java stored procedures stable and robust enough for usage in 10g? I'm wondering about issues with the embedded JVM, the jit, garbage collection, or other things that might impact a heavily used database.

Read the article

Is it just me or is this a baffling tech interview question

- by Matthew Patrick Cashatt

Background I was just asked in a tech interview to write an algorithm to traverse an "object" (notice the quotes) where A is equal to B and B is equal to C and A is equal to C. That's it. That is all the information I was given. I asked the interviewer what the goal was but apparently there wasn't one, just "traverse" the "object". I don't know about anyone else, but this seems like a silly question to me. I asked again, "am I searching for a value?". Nope. Just "traverse" it. Why would I ever want to endlessly loop through this "object"?? To melt my processor maybe?? The answer according to the interviewer was that I should have written a recursive function. OK, so why not simply ask me to write a recursive function? And who would write a recursive function that never ends? My question: Is this a valid question to the rest of you and, if so, can you provide a hint as to what I might be missing? Perhaps I am thinking too hard about solving real world problems. I have been successfully coding for a long time but this tech interview process makes me feel like I don't know anything. Final Answer: CLOWN TRAVERSAL!!! (See @Matt's answer below) Thanks! Matt

Read the article

Dock with dual external DVI monitors with Intel + Nvidia Optimus?

- by Ryan

I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

Read the article

Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

- by Nic

I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

Read the article

How to run installation CD for second monitor?

- by dobsoft

I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Read the article

Ubuntu 14.04 ATI Radeon open source driver with distorted video playback

- by Bwog

Video in VLC or SMplayer is often in black and white with washed-out colors in the wrong place (translated considerably). Moreover, the last video image is often visible when a new video is started and persist as long as the new video is running. Colors have a recognizable shape (e.g. a persons clothes or face), but can be obviously incorrect (e.g. green or purples faces). This is independent of the format of the videos (mp4, mkv, wmv). Sometimes all problems disappear when a new video is started, but often only a reboot restores normal video. Ubuntu was upgraded to 14.04 and is fully updated. Processor intel core i5-2500K cpu. gpu: amd/ati Radeon HD 7950. graphics: gallium 0.4 on AMD Tahiti. xorg xserver amd/ati display driver wrapper from xserver-xorg-video-ati. :~$ Xorg -version X.Org X Server 1.15.1 Release Date: 2014-04-13 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu Current Operating System: Linux Mare 3.13.0-29-generic #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=number ro Build Date: 16 April 2014 01:36:29PM xorg-server 2:1.15.1-0ubuntu2 Current version of pixman: 0.30.2 ~$ lspci | grep VGA 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] Question: how to restore regular video playback?

Read the article

November eSTEP nyhedsbrev til hardware partner presales

- by user12842157

Kære partner,Vi vil hermed gøre dig opmærksom på at November versionen af vores eSTEP nyhedsbrev nu kan findes på eSTEP portalen. Du finder omtalte nyhedsbrev på vores portal under eSTEP News ---> Latest Newsletter. For at få access til portalen skal du bruge linket nederst i denne blog. Nyt fra Oracle: Reflektioner over Oracle OpenWorld, Oracle Buys GoAhead Det tekniske hjørne: T4 processor, SPARC SuperCluster T4-4, Pillar Axiom 600, Oracle ZFS Appliance, Hybrid Columnar Compression Support for ZFS Storage Appliances and Pillar Axiom Storage Systems, Oracle Exalytics In-memory Machine, Oracle Big Data Appliance, Oracle Database Express Edition 11g Release 2(Oracle Database XE), Oracle Public Cloud Træning og events: eSTEP Events Schedule, Recently Delivered TechCasts, Delivered Campaigns in 2011, Q&A covering Oracle Database Appliance How to ...: Oracle Server Finder - choose the system that is right for your, Power calculator for all the HW, SW documentation search , TO YOUR ATTENTION - Remarks to new configuration-options for 7120 URL: http://launch.oracle.com/PIN: er sendt til vores kontaktliste, ellers henvend dig til : [email protected] versioner af dette nyhedsbrev kan findes på portalen under "Archived Newsletters", mere information findes også under Events, Download og Links.Vi værdsætter enhver feed back på indholdet på portalen og anden information vi leverer.Med venlig hilsenPartner HW Enablement EMEA

Read the article

Reader Poll: Are You Going to Buy the New iPad 2?

- by Jason Fitzpatrick

Steve Jobs announced the iPad 2 moments ago which will touch off a flurry of new purchases, upgrades, and general Apple-centric muttering and fist shaking. Will you be buying an iPad 2? Photo courtesy of Endgadget’s liveblog coverage of the iPad 2 launch. The first iPad sales exceeded everyones expectations, Apple fans and detractors alike, with a crazy 15 million units moved last year. The new iPad rocks a dual-core processor, a front and rear-facing camera, improved graphics, and a razor thinness (33% thinner than the current model), among other improvements. Are the improvements enough to entice you into buying one? Hit up the poll below to log your vote and then fill in the details in the comments. How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper Data Networks Visualized via Light Paintings [Video]

Read the article

SOA Suite Demo System updated – make use of Oracle hosted demo systems or download the image

- by JuergenKress

To get access to the demo environments please contact OPN! Global Sales Engineering (GSE, formerly DSS) is happy to announce the availability of the SOA 11g (11.1.1.8) Platform. The Platform is fully featured, based on plug and play architecture, and designed to build best-of-breed SOA & Business Process Management 11g demos. Demo Highlights Designed & Developed on the "Build your own demos (POC)" concept Installed, configured latest versions of FMW products SOA, Business Activity Monitoring (BAM), Oracle Service Bus (OSB), Oracle Enterprise Repository (OER), Oracle Event Processor (OEP), Oracle Service Registry (OSR), WebCenter Content and WebCenter Portal Platform is designed & tuned for best performance Hot plug-in capability for additional middleware components Call to Action Check out the 1 minute video overview of this SOA 11g (11.1.1.8) Platform Review the latest Release Notes & other collaterals on Demo Store Visit the GSE home page to book the “SOA 11.1.1.8.0 Platform” Customizable demo Additional information is available on this page. For questions or feedback please contact [email protected] or [email protected]. This announcement will appear in the archive as Number 453. Support If you need assistance or encounter any issues please submit a GSE Repository ticket or call the GSE Support Hotline for assistance. The GSE Support Hotline is available 24 hours a day, Monday through Friday, at: US/CAN: +1.650.506.8763 or EMEA: +44 118 9240808 or APAC: +65.6436.2150 or LAD: +1.650.506.8763 or Japan: +81-3-6834-6097. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA demo,demo system,sales. pre-sales,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article

crunchbang: it takes up how much memory?!?!

- by Theo Moore

I've been trying many distros of Linux lately, trying to find something I like for my netbook. I started out with Ubuntu, and I can tell you I am a big fan. Ubuntu is now fast to install, much simpler to administer, and pretty light resource-wise. My original install was the standard 32 bit version of 9.04. I tried the netbook remix version of this release, but it was very, very slow. Even the full-blown version used only about 200mb. Much better than the almost 800 that the recommended Windows y version took. Once the newest release of Ubuntu was released, I decided to try the netbook remx of 10.04. It used even less RAM; only about 150mb. I thought I'd found my OS. I certainly settled in and prepared to use it forever. Then, someone I know suggested I try cunchbang. It is the most minimalistic UI I've ever seen, using Openbox rather than Gnome or KDE. Very slick, simple and clean. Since I am using the alpha of the most recent version (using Debian Squeeze), the apps provided for you are few...although more will be provided soon. You do have a word processor, etc., although not the OpenOffice you would normally get in Ubuntu. But the best part? 48MB. That's it. 48mb fully loaded, supporting what I can "hotel services". It's fast, boots quick, and believe it or not, I can even do Java-based development....on my netbook! Pretty slick. More on it as I use it.

Read the article

Ubuntu 12.10 unmet dependencies

- by John

I have Ubuntu 12.10 with 3.2.0.24-generic #39-Ubuntu running on a Dell Inspiron 700m laptop. I have unmet dependencies as follows: root@John-700m:/home/John# sudo apt-get remove --purge linux-image-3.5.0-{18,27,31,34}-generic Reading package lists... Done Building dependency tree Reading state information... Done Package 'linux-image-3.5.0-18-generic' is not installed, so not removed Package 'linux-image-3.5.0-27-generic' is not installed, so not removed Package 'linux-image-3.5.0-31-generic' is not installed, so not removed Package 'linux-image-3.5.0-34-generic' is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-image-generic but it is not going to be installed linux-image-extra-3.5.0-18-generic : Depends: linux-image-3.5.0-18-generic but it is not going to be installed linux-image-extra-3.5.0-27-generic : Depends: linux-image-3.5.0-27-generic but it is not going to be installed linux-image-extra-3.5.0-31-generic : Depends: linux-image-3.5.0-31-generic but it is not going to be installed linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I tried to remove the packages, but I still get the same error message. Any help would certainly be appreciated. @Eric, well noted. Here is the reults: model name : Intel(R) Pentium(R) M processor 1.60GHz flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 Thanks again. @Eric, If I need to downgrade to Ubuntu 12.04 from 12.10, can I do it without having to mess my current partition or files? I also have Windows XP running on the machine. Best. @Eric, if you are online, I could use your help (or anybody's else). I installed the package for non-pae unit and I still get the same error. Any suggestions? Thanks

Read the article

Solaris 11 : les nouveautés vues par les équipes de développement

- by Eric Bezille

Translate in English Pour ceux qui ne sont pas dans la liste de distribution de la communauté des utilisateurs Solaris francophones, voici une petite compilation de liens sur les blogs des développeurs de Solaris 11 et qui couvre en détails les nouveautés dans de multiples domaines. Les nouveautés côté Desktop What's new on the Solaris 11 Desktop ? S11 X11: ye olde window system in today's new operating system Accessible Oracle Solaris 11 - released ! Les outils de développements Nagging As a Strategy for Better Linking: -z guidance Much Ado About Nothing: Stub Objects Using Stub Objects The Stub Proto: Not Just For Stub Objects Anymore elffile: ELF Specific File Identification Utility Le nouveau système de packaging : Image Packaging System (IPS) Replacing the Application Packaging Developer's guide IPS Self-assembly - Part 1: overlays Self Assembly - Part 2: Multiple Packages Delevering configuration La sécurité renforcée dans Solaris Completely disabling root logins in Solaris 11 Passwork (PAM) caching for Solaris su - "a la sudo" User home directory encryption with ZFS My 11 favorite Solaris 11 features (autour de la sécurité) - par Darren Moffat Exciting crypto advances with the T4 processor and Oracle Solaris 11 SPARC T4 OpenSSL Engine Solaris AESNI OpenSSL Engine for Intel Westmere Gestion et auto-correction d'incident - "Self-Healing" : Service Management Facility (SMF) & Fault Management Architecture (FMA) Introducing SMF Layers Oracle Solaris 11 - New Fault Management Features Virtualisation : Oracle Solaris Zones These are 11 of my favorite things! (autour des zones) - par Mike Gerdts Immutable Zones on Encrypted ZFS The IPS System Repository (avec les zones) - par Tim Foster Quelques bonus de la communauté Solaris Solaris 11 DTrace syscall Provider Changes Solaris 11 - hostmodel (Control send/receive behavior for IP packets on a multi-homed system) A Quick Tour of Oracle Solaris 11 Pour terminer, je vous engage également à consulter ce document de référence fort utile : Transition from Oracle Solaris 10 to Oracle Solaris 11 Bonne lecture ! Translate in English

Read the article

What is the best way to code the XNA Game Server for FPS game?

- by AgentFire

I'm writing a FPS XNA game. It gonna be multiplayer so I came up with following: I'm making two different assemblies — one for the game logic and the second for drawing it and the game irrelevant stuff (like rocket trails). The type of the connection is client-server (not peer-to-peer), so every client at first connects to the server and then the game begins. I'm completly decided to use XNA.Framework.Game class for the clients to run their game in window (or fullscreen) and the GameComponent/DrawableGameComponent classes to store the game objects and update&draw them on each frame. Next, I want to get the answer to the question: What should I do on the server side? I got few options: Create my own Game class on the server, which will process all the game logic (only, no graphics). The reason why I am not using the standart Game class is when I call Game.Run() the white window appears and I cant figure out how to get rid of it. Use somehow the original XNA's Game class, which is already has the GameComponent collection and Update event (60 times per second, just what I need). UPDATE: I got more questions: First, what socket mode should I use? TCP or UDP? And how to actually let the client know that this packet is meant to be processed after that one? Second, if I is going to use exacly GameComponent class for the game objects which is stored and process on the server, how to make them to be drawn on the client? Inherit them (while they are combined to an assembly)? Something else?

Read the article

Installer doesn't display partition I want to install to

- by Aditya

While performing a Ubuntu 10.10 installation on my laptop, it doesn't show partitions pertaining to the PC. My PC configuration is as follows : HP Pavilion dv6 - 2020AX AMD Turion II Dual Core Mobile Processor M500 4 GB RAM OS Installed : Windows 7 500 GB Hard drive partitioned as follows : C : 227 GB (Free : 142 GB) D : 11.9 GB (Free : 1.98 GB) - Recovery F : 174 GB (Free : 18 GB) G : 50.5 GB (Free : 50.4 GB) So, I want to perform a Dual-boot installation on my PC, so that Ubuntu resides in the free disk space G:. Therefore, I started the Ubuntu 10.10 installation and select the manual partitioning feature in the installation. However, in the 'Allocate Drive Space' section of the installation, following partitions information is displayed: Partition Type Size Used /dev/sda /dev/sda1 1 MB unknown /dev/sda2 ntfs 208 MB unknown /dev/sda3 ntfs 244813 MB 168540 MB /dev/sda4 ntfs 255083 MB 3221 MB where /dev/sda - 500 GB So, what exactly is the problem? What is it should I do to install Ubuntu 10.10 in the G: disk space? Why are the partitions not being shown as the way they should be? Any Suggestions. Thank you for the help.

Read the article

Upgrade from 11.04 to 12.04 failed - unable to login

- by Tobias M.

Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

Read the article

new project; entire node.js app

- by Jared

I have been looking into Node.js, express and Nowjs and love how easy it is to have real time interactions between clients. My background is mostly from CodeIgniter MVC using PHP and MYSql. I want to re make a current web project of mine from scratch to make everything better and more real time with this newer technology. After researching and doing test examples I want to use node.js , express and Nowjs for the real time interactions once someone connects to the socket.io to pull data back to clients. But use Code Igniter for the control of the site and user management , possible shopping cart/store , pretty much everything else. This is purely due to time constraints and that I am already familiar with doing it that way. I have been looking at MongoDB as an alternative to MySql, Basically the app is going to be multiple chat rooms all on one page. with the ability of notifications and private messaging. Lots of data transfer and images. before I started piecing it together I wanted to get people who have already done something similar. My model would use Code Igniter and MySQL to render the page and then connect them onto a node.js server and broadcast using express and nowjs would using a mongoDB be better than mySQL for tons of messages and data being stored or MYSQL? Also does it make since to not make the whole site on Node.js , kinda piece it together like that? I was asked to re post this somewhere else as it was not up to the format for SO, OP from here http://stackoverflow.com/questions/12649469/new-project-need-some-start-up-advice-node-js-app#comment17062924_12649469

Read the article

Exempt programs from using active VPN connection

- by Oxwivi

When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

Read the article

reinstalling phpmyadmin

- by explorex

EDIT:: installed mysql-server but no phpmyadmin (since phpmyadmin was installed before mysql, that resulted an error). How to reinstall phpmyadmin with database (there is no phpmyadmin datbase)? unstalling it and reinstalling it didn't help. i was trying to install phpmyadmin (and zend framework) through synaptic manager but in the middle i was prompted for password i thought it was phpmyadmin password and i proceeded but i got error and i aborted. and then again i tried to reinstall, it reinstalled but i am not getting phpmyadmin. EDIT::The following is invalid so please don't bother apache is running but mysql is not some of it's characteristics are: santosh@explorer:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) santosh@explorer:~$ sudo apt-get install mysql-server E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? Should i be asking this question here or stackoverflow? UPDATES:: after restarting my computer santosh@explorer:~$ sudo service mysql start [sudo] password for santosh: mysql: unrecognized service UPDATES:: santosh@explorer:~$ sudo apt-get install mysql Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package mysql

Read the article

12.04 No Sound - ALC888 / Radeon 3200HD

- by Ross

Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

Read the article

xubuntu install on p4

- by adi

Hello i am thinking of installing xubuntu on a dell gx260 pentium 4 pc with: 1.8GHz processor 64mb integrated video card(had other but it died on me) 1GB of RAM Ive installed lubuntu but im not enjoying it since i can not make shortcuts of partitions or folders on desktop for faster usability(i dont want them on my bar, want them on desktop) also the buggs i seen on it made me reconsider of using lubuntu:mplayer not working, no video was working,chromium outdated etc and i dont want to stay all day to find solutions over the internet. And seen on internet from xubuntu that theyve had shortcuts for theyre partitions on desktop, and is more attractive.(can some1 tell me if with xubuntu u can make shortcuts on desktop, i mean the shortcuts remain after reboot) 1 more thing to add:at installing lubuntu when it asked me where to install it only showed me the entire hard drive(i have 3 partitions on it) and made me select the size of the lubuntu partition from 1 that the installer wanted.(from local disk D: from windows xp view),need to mention that i have windows xp on the machine which is on local C:, kept my downloads on local D:, and other stuff on E:. I want an ubuntu distro which would work fine especially for internet purpose. Can someone lend me a hand on this?

Read the article

Star Trek inspired home automation visualisation

- by Zak McKracken

I’ve always been a more or less active fan of Star Trek. During the construction phase of my house I started coding a GUI for controlling the house which has an EIB. Just for fun I designed a version inspired by the LCARS design used in Star Trek TNG and showed this to my wife. I showed her several designs before but this was the only one, she really liked. So I decided to go on with this. I started a C# WinForms application. The software runs on a wall mounted Shuttle Barebone-PC. First plan was an industrial panel-pc but the processor was too slow. The now-used Atom is ok. I started with the LCARS-controls found on Codeproject. Since the classic LCARS design divides the screen into two parts this tended to be impracticable, so I used my own design For now the software is able to: Switch lights/wall outlets Show current temperatures for all room controllers Show outside temperature with a 24h trend chart Show the status of the two heat pumps Provide an alarm clock (e.g. for cooking) Play internet radio streams Control absence Mute the door bell Speak status messages via speech synthesis For now, I’m working on an integration of my electric meter. The main heat pump and the electric meter are connected to my LAN. I also tried some speech recognition, but I’ve problems with the microphone. I't’s working when you are right in front of the PC, but not far away, let’s say on the other side of the room. So this is the main view. The table displays raw values which are sent over the EIB – completely useless but looks great For each floor I have a different view. Here you can see the temperatures and check the status of the lights (the buttons are blinking when a light is switched on) This is the view for the heat pump: Next step would be to integrate a control of my squeezebox server (I use different Squeezeboxes through the house as a multiroom audio solution)

Search Results

Search found 5662 results on 227 pages for 'processor socket'.

Page 157/227 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164 | Next Page >

- by Eidelmaim

- by Rishee

- by user59565

- by Scott A

- by Matthew Patrick Cashatt

- by Ryan

- by Nic

- by dobsoft

- by Bwog

- by user12842157

- by Jason Fitzpatrick

- by JuergenKress

- by Theo Moore

- by John

- by Eric Bezille

- by AgentFire

- by jhpierce -Oracle

- by Aditya

- by Tobias M.

- by Jared

- by Oxwivi

- by explorex

- by Ross

- by adi

- by Zak McKracken

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164 | Next Page >